Bosch | VG4-100 Series | Bosch VG4-152-PCE1WF IP Dome cameras product datasheet

Bosch VG4-152-PCE1WF IP Dome cameras product datasheet
CCTV | AutoDome® 100 Series Fixed Camera System
AutoDome® 100 Series Fixed Camera
System
▶ 540TVL fixed dome series
▶ Fully interchangeable CPUs, cameras, housings,
communications, and mounts
▶ Color and day/night camera options
▶ Available with 2.7–13.5 mm or 5–50 mm lens
▶ All versions allow for remote configuration and update
▶ Optional hybrid operation provides simultaneous
analog (coax) and IP (MPEG-4) connectivity
▶ UTP transmission standard on all analog models
▶ Three-year warranty
Bosch’s AutoDome modular camera system is a
revolutionary new concept in dome cameras. More than just
a series of cameras, it’s a dome platform built around a
system of intelligent, interchangeable modules that allow
you to update camera functionality quickly and costeffectively. Using common components lets you install a
basic camera system today and migrate to a more advanced
version tomorrow – without having to replace the entire
dome, thus protecting your initial investment.
Interchangeable modules
The entire AutoDome system is based on five
interchangeable modules: the CPU, camera, housing,
communications, and power supply. Simply swap one of
AutoDome’s interchangeable modules and quickly upgrade
from analog to IP, color to day/night, or add motion
tracking. Never before have you had the ability to adapt a
security system to your changing needs this quickly or
inexpensively.
By using the same housing components, all installations
have a consistent look, and observers have no idea which
type of camera (if any) is watching over them. This unique,
modular design also gives you the flexibility to move
cameras between different housings when special coverage
is needed, or as site plan requirements change. For
example, a fixed color camera over a specific area could
easily be “hot-swapped”to a day/night camera without
removing the power. Migrating from a fixed dome to a PTZ
dome with advanced features such as AutoTrack II
intelligent tracking can be done quickly and easily, without
requiring dome removal or rewiring. AutoDome’s Ethernet
communications module allows you to add IP functionality
while maintaining connectivity to existing analog inputs and
outputs.
100 Series highlights
The AutoDome 100 Series combines the same high-quality
housings used by AutoDome PTZ cameras with the awardwinning imaging technology of Dinion high-resolution color
or day/night fixed cameras and varifocal lenses.
The AutoDome 100 Series supports a variety of standard
and optional video and data transmission methods,
including Bilinx (over coax and UTP), fiber, and even TCP/
IP over Ethernet. Remote control, configuration, and
firmware updates can also be performed over these cables,
offering you unparalleled control of your cameras.
The optional IP Communications Module has hybrid
functionality to protect your current analog technology
investment while providing a clear and stable migration
path to fully digital, IP-based solutions. This allows you to
move to IP video at your own pace – all at once or one
camera at a time. And since all AutoDome modules are
www.boschsecurity.com
2 | AutoDome® 100 Series Fixed Camera System
completely interchangeable, there is no need to replace
expensive components (e.g., cameras) or labor-intensive
components (e.g., mounts and housings).
direct input to a conventional analog matrix switcher or
DVR, further enhancing AutoDome’s viewing and recording
flexibility.
MPEG-4 encoding
Functions
The following are some of the features that make the
AutoDome 100 Series the most flexible fixed dome camera
systems in the security industry.
High-performance camera features
AutoDome 100 Series cameras have a 1/3-inch color CCD
with Bosch’s unique 15-bit Dinion digital imaging
technology to deliver a 32-fold sensitivity improvement and
a full 540 horizontal lines of resolution. In addition,
AutoDome 100 Series cameras incorporate a number of
features not found in other fixed dome cameras.
These include:
•
•
•
•
•
•
XF-Dynamic - Extends the camera’s dynamic range to
deliver sharper, more detailed images and outstanding
color reproduction accuracy.
NightSense – Automatically activated under low-light
conditions to extend the 100 Series’ exceptional
sensitivity by a factor of three during monochrome
operation.
SensUp – Increases integration time by a factor of 10 to
dramatically enhance sensitivity.
Back Light Compensation (BLC) – A fully programmable
backlight compensation (BLC) area of interest and
variable BLC level let 100 Series day/night cameras
overcome even the most challenging entrance,
vestibule, and lobby applications.
Auto Black – Enhances contrast by compensating for
reduced contrast due to fog, mist, or glare.
Default Shutter – Automatically adjusts to the lens
opening at fast shutter speeds, eliminating motion blur
and providing remarkably clear and detailed images of
fast-moving objects.
AutoDome 100 Series day/night versions automatically
switch from color to monochrome by removing a
mechanically switching IR filter in low-light conditions. This
boosts the infrared illumination sensitivity while
maintaining superior image quality.
Optional hybrid analog/IP operation
Optional hybrid connectivity allows the AutoDome to
simultaneously stream IP video across a local or wide area
network, and CVBS video via coaxial cabling to support
existing analog equipment. Network video streams are sent
over IP networks and can be viewed with the Bosch DiBos
Digital Video Recorder, or on a PC running VIDOS video
management software. Alternatively, a Bosch IP video
decoder can be used to display the video on an analog CVBS
or VGA monitor. For maximum accessibility, video can be
viewed using a Web browser. The BNC connection provides
AutoDome’s IP Communications Module uses the latest
MPEG-4 compression technology to provide DVD-quality
4CIF video at frame rates up to 25/30 PAL/NTSC images per
second (IPS). The IP module also leverages bandwidth
throttling and multicasting capabilities to efficiently
manage bandwidth and storage requirements while
delivering the best possible image quality and resolution.
Tri-streaming video
Bosch’s innovative tri-streaming feature enables
AutoDomes equipped with the optional IP Communications
Module to generate two independent MPEG-4 streams and
a JPEG stream simultaneously. This feature allows you to
stream high-quality images for live viewing while recording
at a reduced frame rate, and at the same time, stream JPEG
images to a remote PDA device.
Unsurpassed reliability
AutoDome builds on Bosch’s 10-plus years of experience
designing and manufacturing dome camera systems. All
AutoDome pendant housings (indoor and outdoor) are
rated to provide IP 66 protection. Outdoor EnviroDome
housings provide an operating temperature range down to
–40° C (–40° F). The optional “XT”extended temperature kit
allows AutoDome to operate in temperatures down to –
55° C (–67° F), ensuring reliable operation in even the
harshest environments.
All housings come standard with a rugged polycarbonate
bubble, recessed set screws, and a recessed bubble latch
to reduce the chance of damage from vandalism. Inside the
dome, the power, data, and video are all protected against
unexpected surges of power.
Ease of installation and servicing
Bosch’s innovative software, the Configuration Tool for
Imaging Devices (CTFID), allows operators or technicians
to change camera settings and even update firmware from
virtually anywhere without need for additional wiring. For
the new Ethernet versions, an embedded Web server lets
the installer access all the user settings, make camera
adjustments, and update firmware via a standard Web
browser.
AutoDome’s innovative design simplifies installation and
servicing. AutoDome reduces maintenance costs because
you can replace individual modules instead of entire camera
assemblies. Simply pop out the old module and slide in the
new ones: it’s almost as easy as changing a light bulb. All
tethers have been replaced with hinges, which makes
installation and servicing safer and easier. You can even
access the built-in power supply without taking down the
dome.
AutoDome® 100 Series Fixed Camera System | 3
Installation/Configuration Notes
Feature Comparison Matrix
The following table provides an overview of the AutoDome
camera family and its available features:
AutoDome
100 Series
Standard Features
AutoDome
200 Series
AutoDome
300 Series
7
W
AutoDome
500i Series
Interchangeable Modules
C
1
High Speed PTZ
Preset Shots
64
99
99
Preset Tour
VG4
Guard Tour
Alarm Inputs
7/4
M
C
3
-
5
5
P
0
R
6
E
E
P
-
1
7/4
High Resolution Camera
Day/Night Operation
IR Sensitive
1
C
2
T
3
SensUp Extended Sensitivity
0
1
4
2
I
6
4
UTP/Coax Transmission
F
8
2
Hybrid Analog/IP Connectivity
Ordering Guide
Bilinx Remote Configuration*
Cable Compensation
Hot-Swap Camera Modules
Ruggedized, Vandal-Resistant Enclosure
Advanced Features
AutoTrack II Motion Tracking
1 Video Format
Fixed PAL
0
24 VAC1
6
Fixed NTSC
1
120 VAC
2
230 VAC
2 Camera Type
Video Motion Detection
6 Power (pendants only)
5
Image Stabilization
1
Color (2.7–13.5 mm)
Privacy Masking and Sector Blanking
2
Day/Night (2.7–13.5 mm)
W Wall
Advanced Alarm Control
3
Color (5–50 mm)
M Mast
4
Day/Night (5–50 mm)
C
Corner
R
Roof4
C
In-ceiling2
P
Pipe
P
Indoor Pendant
_
No Mount2
E
Outdoor Pendant
*Compatible over Coax and UTP transmission only. Remote configuration
over IP via web interface.
Certifications and Approvals
Electromagnetic Com- Complies with FCC Part 15, ICES-003, and CE
patibility (EMC)
regulations, including EN50130-4 and
EN50121-4
Product Safety
Complies with CE regulations, UL, CSA, EN, and
IEC Standards
Patents
D424,087, 7,111,998, 7,217,045, 7,306,383,
D561,808
3 Enclosure
4 Bubble
C
Clear Rugged
T
Tinted Rugged
7 Mount Pendant
8 Fiber Optics
_
No Fiber
F
Fiber3
5 Communications
0
Fixed (coax, UTP)
E
Ethernet (TCP/IP)
1 No transformer included. Customer must supply an approved 24 VAC
limited power supply (VG4-A-PSUx or equivalent).
2 Recessed in-ceiling housing units do not require kit options for reference
numbers 6, 7, or 8.
3 Fiber optic option is multi-mode with biphase. Requires LTC 4629 at the
system.
4 Roof mount mounts to vertical Parapet. For flat roof installation, order
an additional LTC 9230/01 Flat Roof Adapter Plate.
www.boschsecurity.com
4 | AutoDome® 100 Series Fixed Camera System
Technical Specifications
Camera 5 mm–50 mm - Color
Camera 2.7 mm-13.5 mm Color
Imager
Imager
(752 x 582 PAL)/(768 x 492 NTSC)
1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris
Automatic
Field of View
78.3° to 18.5°
Video Output
1.0 Vp-p, 75 Ohm
Gain Control
Off/Auto (with adjustable limit) /manual
Synchronization
Line-Lock (0° to 358° vertical phase adjust) or
internal crystal
Aperture Correction
Horizontal and vertical
Horizontal Resolution
540 TVL (NTSC, PAL) typical
Sensitivity (typical)
30 IRE
50 IRE
SensUp Off
0.29 lx
0.9 lx
SensUp On
0.029 lx
0.09 lx
SNR
>50 dB
White Balance
2500 K to 9000 K (with AWB hold mode and
manual mode)
Lens
Iris
Automatic
Field of View
47.5° to 5.0°
Video Output
1.0 Vp-p, 75 Ohm
Gain Control
Off/Auto (with adjustable limit) /manual
Synchronization
Line-Lock (0° to 358° vertical phase adjust) or
internal crystal
Aperture Correction
Horizontal and vertical
Horizontal Resolution
540 TVL (NTSC, PAL) typical
Sensitivity (typical)
30 IRE
50 IRE
SensUp Off
0.42 lx
1.3 lx
SensUp On
0.042 lx
0.13 lx
SNR
>50 dB
White Balance
2500 K to 9000 K (with AWB hold mode and
manual mode)
Camera 5 mm–50 mm Day/Night
Imager
Camera 2.7 mm–13.5 mm Day/Night
Imager
1/3 in. Interline CCD
1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris
Automatic
Field of View
78.3° to 18.5°
Video Output
1.0 Vp-p, 75 Ohm
Gain Control
Off/Auto (with adjustable limit) /manual
Synchronization
Line-Lock (0° to 358° vertical phase adjust) or
internal crystal
Aperture Correction
Horizontal and vertical
Horizontal Resolution
540 TVL (NTSC, PAL) typical
Sensitivity (typical)
30 IRE
50 IRE
Day Mode
SensUp Off
0.29 lx
0.9 lx
SensUp On
0.029 lx
0.09 lx
SensUp Off
0.12 lx
0.36 lx
SensUp On
0.012 lx
0.09 lx
Night Mode
SNR
>50 dB
White Balance
2500 K to 9000 K (with AWB hold mode and
manual mode)
Lens
Iris
Automatic
Field of View
47.5° to 5.0°
Video Output
1.0 Vp-p, 75 Ohm
Gain Control
Off/Auto (with adjustable limit) /manual
Synchronization
Line-Lock (0° to 358° vertical phase adjust) or
internal crystal
Aperture Correction
Horizontal and vertical
Horizontal Resolution
540 TVL (NTSC, PAL) typical
Sensitivity (typical)
30 IRE
50 IRE
SensUp Off
0.42 lx
1.3 lx
SensUp On
0.042 lx
0.13 lx
SensUp Off
0.17 lx
0.52 lx
SensUp On
0.017 lx
0.052 lx
Day Mode
Night Mode
SNR
>50 dB
White Balance
2500 K to 9000 K (with AWB hold mode and
manual mode)
AutoDome® 100 Series Fixed Camera System | 5
Mechanical/Electrical
7 Ethernet models have no UTP analog output only BNC (coax).
Model
In-Ceiling
Indoor
Pendant
Weight
2.66 kg (5.86 lb) 2.88 kg (6.3 lb)
EnviroDome®
3.32 kg (7.3 lb)
Pan Range 360° cont.
360° cont.
360° cont.
Tilt Angle
1° above horizon
18° above horizon 18° above horizon
Power
21-30 VAC
50/60 Hz
21-30 VAC
50/60 Hz
21-30 VAC
50/60 Hz
Power
Draw:
(typ)
Analog
Models
7.5 W
7.5 W
43.5 W5
Ethernet
Models
11.5 W
11.5 W
47.5 W5
Mounts/Accessories
Pendant Arm Mounts
Wall Arm (No Transformer)
Wall Arm (120/230 VAC Transformer VG4-A-PA1F / VG4-A-PA2F
and Fiber Optics)
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate
LTC 9542/01
Mast (Pole) Mounting Plate
LTC 9541/01
Pendant Pipe Mounts
Pipe Mount Cap
VG4-A-9543
Pendant Roof Mounts
Roof (Parapet) Mount
5 Add 16 W if using VG4-SHTR-XT kit.
VG4-A-PAO
Wall Arm (120/230 VAC Transformer) VG4-A-PA1 / VG4-A-PA2
VG4-A-9230
Optional Mounting Plates for Roof Mounts
Surge Suppression
Flat Roof Adapter for Parapet Mount LTC 9230/01
Protection on Video Peak current 10 kA (Gas Tube Arrester), peak power
1000 W (10/1000 μ)
Power Supplies
Protection on Power Peak current 7.3 A, peak power 600 W (10/1000 μ)
Input (Dome)
Protection on Pow- Peak current 21.4 A, peak power 1500 W
er Output (Arm Pow- (10/1000 μ)
er Supply)
Environmental
Model
In-Ceiling
Operating –10°C to 50°C
Temp.
(14°F to 122°F)
Indoor
Pendant
EnviroDome®
–10°C to 50°C
(14°F to 122°F)
–40°C to 50°C
(–40°F to 122°F)
Outdoor Power Supply Box
(120/230 VAC Transformer)
VG4-A-PSU1 / VG4-A-PSU2
Outdoor Power Supply Box
VG4-A-PSU1F / VG4‑A‑PSU2F
(120/230 VAC Transformer and Fiber
Optics)
Extended temp heater
VG4-SHTR-XT
module extends temperature range to
–55°C (–67°F) for EnviroDome® only
Cables
Monitor cable
S1460
Fiber Optic Models
Storage
Temp.
–40°C to 60°C
–40°C to 60°C
–40°C to 60°C
(–40°F to 140°F) (–40°F to 140°F) (–40°F to 140°F)
Optical
Fiber Compatibility
Humidity
0% to 90% relative, non-condensing
50/125 mm, 62.5/125 mm, low loss multimode
glass fiber, rated for a minimum system bandwidth
of 20 MHz
(video 850 nm/Control 1300 nm)
Max Distance
4 km (2.5 miles)
0% to 90% relative, non-condensing
0% to 100% relative,
condensing
Protection IP 66, IK 8 (IEC 62262)
Miscellaneous
Communications Protocols
Bilinx6
6 Bilinx not available on Ethernet models.
User Connections
Power (Camera)
21-30 VAC, 50/60 Hz
Power (Heater)
21-30 VAC, 50/60 Hz
Video
BNC/UTP7
Audio Line-in
9 K Ohm typ, 5.5 Vp-p max
www.boschsecurity.com
6 | AutoDome® 100 Series Fixed Camera System
201.2 216.4
7.92 8.52
3
1
2
201.8
7.94
4
1.90
0.75
5
6
Indoor System Dimensions
Reference Description
Reference Description
1
Wall Mount – Side with power supply and trim skirt removed
5
In-ceiling Mount – Front
2
Wall Mount – Front with power supply and trim skirt
6
In-ceiling Mount – Side
3
Wall Mount – Back with power supply and trim skirt
4
Pipe Mount
mm
in.
AutoDome® 100 Series Fixed Camera System | 7
Ø
Outdoor System Dimensions
Reference Description
1
Wall Mount – Side with power supply and trim skirt
2
Wall Mount – Front with power supply and trim skirt
3
Wall Mount – Back with power supply and trim skirt
4
Pipe Mount
5
Mast Mount
6
Corner Mount
7
Roof Mount
8
Roof Mount Adapter
9
Power Supply for Pipe and Roof Mounts
www.boschsecurity.com
8 | AutoDome® 100 Series Fixed Camera System
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems Inc. 2008 | Data subject to change without notice
T3382519563 | Cur: en-US, V13, 18 Mar 2008
Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3450
Fax: +65 6319 3499
apr.securitysystems@bosch.com
www.boschsecurity.com
Represented by
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising