Sony DVP-NS318 User Guide Manual Operating Instruction Pdf

Sony DVP-NS318 User Guide Manual Operating Instruction Pdf
4-136-672-12(1)
CD/DVD
Player
Operating Instructions
DVP-NS318
© 2009 Sony
Corporation
Downloaded From DvDPlayer-Manual.com Sherwood
Manuals
WARNING
To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.
To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified
personnel only.
The mains lead must only be
changed at a qualified
service shop.
Batteries or batteries
installed apparatus shall not
be exposed to excessive heat
such as sunshine, fire or the
like.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the rear
exterior.
CAUTION
Disposal of Old Electrical &
Electronic Equipment (applicable
in the European Union and other
European countries with separate
collection systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
detailed information about
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this CD/DVD player is harmful to
eyes, do not attempt to disassemble
the cabinet.
Refer servicing to qualified
personnel only.
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste. On certain batteries this
symbol might be used in
combination with a chemical
symbol. The chemical symbols for
mercury (Hg) or lead (Pb) are
added if the battery contains more
than 0.0005% mercury or 0.004%
lead. By ensuring these batteries
are disposed of correctly, you will
help prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the
materials will help to conserve
natural resources.
DvDPlayer-Manual.com
Sherwood Manuals
Notice for customers in the
United Kingdom and
Republic of Ireland
A moulded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a
5AMP fuse approved by ASTA or
BSI to BS1362, (i.e., marked with
or
mark) must be used.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
Downloaded From
2
In case of products that for safety,
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
For all other batteries, please view
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
For more detailed information
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075
Japan. The Authorized
Representative for EMC and
product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any
service or guarantee matters please
refer to the addresses given in
separate service or guarantee
documents.
Precautions
Safety
• This unit operates on 220 – 240
V AC, 50/60 Hz. Check that the
unit’s operating voltage is
identical with your local power
supply.
• To prevent fire or shock hazard,
do not place objects filled with
liquids, such as vases, on the
apparatus.
Installing
• Do not install the unit in an
inclined position. It is designed
to be operated in a horizontal
position only.
• Keep the unit and discs away
from equipment with strong
magnets, such as microwave
ovens, or large loudspeakers.
• Do not place heavy objects on
the unit.
Lightning
For added protection for this set
during a lightning storm, or when it
is left unattended and unused for
long periods of time, unplug it
from the wall outlet. This will
prevent damage to the set due to
lightning and power-line surges.
Notes about the discs
• To keep the disc clean, handle
the disc by its edge. Do not touch
the surface. Dust, fingerprints, or
scratches on the disc may cause
it to malfunction.
• Do not expose the disc to direct
sunlight or heat sources such as
hot air ducts, or leave it in a car
parked in direct sunlight as the
temperature may rise
considerably inside the car.
• After playing, store the disc in its
case.
• Clean the disc with a cleaning
cloth.
Wipe the disc from the centre
out.
• Do not use solvents such as
benzine, thinner, commercially
available cleaners, or anti-static
spray intended for vinyl LPs.
• If you have printed the disc’s
label, dry the label before
playing.
• Do not use the following discs:
– A disc that has a non-standard
shape (e.g., card, heart).
– A disc with a label or sticker
on it.
– A disc that has cellophane tape
or sticker adhesive on it.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
3
Precautions
On safety
Should any solid object or liquid
fall into the cabinet, unplug the
player and have it checked by
qualified personnel before
operating it any further.
On power sources
• The player is not disconnected
from the AC power source
(mains) as long as it is connected
to the wall outlet, even if the
player itself has been turned off.
• If you are not going to use the
player for a long time, be sure to
disconnect the player from the
wall outlet. To disconnect the
AC power cord (mains lead),
grasp the plug itself; never pull
the cord.
On placement
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
• Do not place the player on a soft
surface such as a rug.
• Do not place the player in a
location near heat sources, or in a
place subject to direct sunlight,
excessive dust, or mechanical
shock.
• Do not install this player in a
confined space, such as a
bookshelf or similar unit.
• Install the player so that the AC
power cord (mains lead) can be
unplugged from the wall socket
immediately in the event of
trouble.
• If the player is brought directly
from a cold to a warm location,
or is placed in a very damp room,
moisture may condense on the
lenses inside the player. Should
this occur, the player may not
operate properly. In this case,
remove the disc and leave the
player turned on for about half an
hour until the moisture
evaporates.
• When you move the player, take
out any discs. If you don’t, the
disc may be damaged.
On adjusting volume
Do not turn up the volume while
listening to a section with very low
level inputs or no audio signals. If
you do, the speakers may be
damaged when a peak level section
is played.
On cleaning
Clean the cabinet, panel, and
controls with a soft cloth slightly
moistened with a mild detergent
solution. Do not use any type of
abrasive pad, scouring powder or
solvent such as alcohol or benzine.
On cleaning discs, disc/lens
cleaners
Do not use cleaning discs or disc/
lens cleaners (including wet or
spray types). These may cause the
apparatus to malfunction.
On replacement of parts
In the event that this unit is
repaired, repaired parts may be
collected for reuse or recycling
purposes.
Copyrights
• This product incorporates
copyright protection technology
that is protected by U.S. patents
and other intellectual property
rights. Use of this copyright
protection technology must be
authorized by Macrovision, and
is intended for home and other
limited viewing uses only unless
otherwise authorized by
Macrovision. Reverse
engineering or disassembly is
prohibited.
• “DVD+RW,” “DVD-RW,”
“DVD+R,” “DVD+R DL,”
“DVD-R,” “DVD VIDEO,” and
“CD” logos are trademarks.
About this manual
• Icons, such as
, listed at
the top of each explanation
indicate what kind of media can
be used with the function being
explained.
For details see “Playable Media”
(page 34).
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the player if they
have the same or similar names
as those on the remote.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
4
• “DVD” may be used as a general
term for commercial DVDs,
DVD+RWs/DVD+Rs/DVD+R
DLs (+VR mode) and DVDRWs/DVD-Rs/DVD-R DLs (VR
mode, video mode).
• NEED-to-know information (to
prevent incorrect operation) is
listed under the b icon. NICEto-know information (tips and
other useful information) is
listed under the z icon.
IMPORTANT NOTICE
Caution: This player is capable
of holding a still video image or
on-screen display image on your
television screen indefinitely. If
you leave the still video image or
on-screen display image
displayed on your TV for an
extended period of time you risk
permanent damage to your
television screen. Plasma display
panel televisions and projection
televisions are susceptible to
this.
If you have any questions or
problems concerning your player,
please consult your nearest Sony
dealer.
Table of Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to Parts and Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hookups and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Step 1: Connecting to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step 2: Connecting to Your Audio Component . . . . . . . . . . . . . . . . . . . . . . .
Step 3: Connecting the Mains Lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step 4: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controlling TVs with the remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step 5: Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
12
13
13
14
14
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playing Discs
..............................................
Control Menu display (Magic Pad). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Control Menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Various Play Mode Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating your own programme (Programme Play) . . . . . . . . . . . . . . . .
Playing in random order (Shuffle Play) . . . . . . . . . . . . . . . . . . . . . . . . .
Playing repeatedly (Repeat Play)
............................
Repeating a specific portion (A-B Repeat Play)
....................................................
Customizing the Playback Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the playback picture (CUSTOM PICTURE MODE) . . . . . . .
Sharpening the picture (SHARPNESS) . . . . . . . . . . . . . . . . . . . . . . . .
Locking discs (PARENTAL CONTROL) . . . . . . . . . . . . . . . . . . . . . . . . .
Playing Video, Photo, and Music Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a photo file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the pace for a slide show (INTERVAL) . . . . . . . . . . . . . . . . . . . .
Selecting the slides’ appearance (EFFECT) . . . . . . . . . . . . . . . . . . . . . .
16
18
19
21
21
22
22
23
23
23
24
24
25
25
26
26
Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the Setup Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LANGUAGE SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREEN SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CUSTOM SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AUDIO SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the digital output signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
27
28
29
30
30
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Self-diagnosis Function (When letters/numbers appear on the screen) . . . .
Playable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parental Control Area Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
32
33
34
36
37
37
38
5
Guide to Parts and Controls
For more information, see the pages indicated in parentheses.
Remote
PICTURE
NAVI
TV
TV [/1 (on/standby) (14)
Turns on the TV, or sets to standby
mode.
TV
TIME/TEXT
CLEAR
AUDIO
SUBTITLE
TOP MENU
MENU
[/1 (on/standby) (14)
Turns on the player, or sets to standby
mode.
2 (volume) +/– (14)
Adjusts the TV volume.
B Number buttons
Enters the title/chapter numbers, etc.
RETURN
DISPLAY
FAST/SLOW
PLAY
2 (volume) +, number 5, AUDIO, and N
buttons have a tactile dot. Use the tactile dot
as a reference when operating the player.
A PICTURE NAVI (25)
Divides the screen into 9 subscreens
so you can choose the desired scene
quickly.
Each time you press the button, the
display changes as follows:
• CHAPTER VIEWER
• TITLE VIEWER
• TRACK VIEWER
The photo files in the album appear in
16 subscreens.
TV t (input select) (14)
Switches between TV and other input
sources.
CLEAR (19)
Clears the entry field.
C TIME/TEXT (9)
Displays the playing time and
remaining time on the TV screen or
front panel display. Press repeatedly
to change the displayed information.
CD/DVD text appears only when text
is recorded on the disc.
If music file has an ID3 tag, the player
will display the album name/track title
from the ID3 tag information. This
player supports ID3 versions 1.0/1.1
and 2.2/2.3.
AUDIO (
)
Changes the audio language or audio
channel.
When 4 digits are displayed, they
indicate a language code. See
“Language Code List” on page 37 to
see which language the code
represents.
SUBTITLE ( ) (25)
– Changes the subtitles when
subtitles are recorded on DVD
VIDEOs/DVD-VR mode/DivX
video files only.
– Displays lyrics for a music file
when pressed during playback. For
details see page 25.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
6
D TOP MENU
Displays the DVD’s top menu.
MENU (25)
Displays the menu.
O RETURN (16)
Returns to the previous display.
DISPLAY (18)
Displays the playback information on
the screen.
*1 For DivX video files and DVDs except
DVD+RWs/DVD+Rs/DVD+R DLs.
*2 For DVDs and DivX video files only.
3 These functions may not work with some
*
scenes.
*4 For DVD VIDEOs and DVD-VR mode only.
5 For DVDs, VIDEO CDs, and video files only.
*
*6 For DVDs and VIDEO CDs only.
b
Some playback functions may not work with
unsupported MPEG-4 format (page 34).
C/X/x/c (19)
Moves the highlight to select a
displayed item.
Centre button (ENTER) (14)
Enters the selected item.
E ./> (previous/next)
Skips to the previous/next chapter,
track, or scene in continuous play
mode.
/
(replay/step/step/
advance)
– Replays the scene*1*3/briefly fast
forward the scene*2*3 when pressed
during playback.
– Plays backward*4/forward*5 one
frame at a time when pressed during
pause mode.
m/M
(scan/slow)
– Fast reverses/fast forwards when
pressed during playback. The speed
changes when pressed repeatedly.
– Plays backward*4/forward*5 in
slow motion when pressed
repeatedly during pause mode.
N (play)
Starts or re-starts playback.
X (pause)
Pauses or re-start playback.
x (stop)
Stops playback.
FAST/SLOW PLAY
Plays in various speed with sound*6
when pressed repeatedly during
playback.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
7
Front panel
A [/1 (on/standby) button (14)
To lock the disc tray (Child Lock)
B Disc tray (16)
You can lock the disc tray to prevent it being
opened by mistake.
C Front panel display (9)
D Z (open/close) button (16)
Opens or closes the disc tray.
E N (play) button (16)
The N button has a tactile dot*.
F x (stop) button (16)
Stops playback.
G
(remote sensor) (13)
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “LOCKED” appears
on the front panel display. The Z button on
the player does not work while the Child
Lock is set.
To unlock the disc tray
* Use the tactile dot as a reference when operating
the player.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
b
Even if you select “RESET” under “SETUP” in the
Control Menu (page 27), the disc tray remains
locked.
Rear panel
A DIGITAL OUT (COAXIAL) jack (12)
C LINE (RGB)-TV jack (10)
B LINE OUT L/R (AUDIO) jacks (12)
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
8
Front panel display
A N, X
Lights up during playback or pause.
B
Lights up during Repeat Play.
C
Lights up when you can change the
angle.
D Playback information
You can view the time and text
information by pressing the TIME/
TEXT button on the remote repeatedly.
The display changes as follows:
When playing a DVD
Current title playing time
r
Current title remaining time
r
Current chapter playing time
r
Current chapter remaining time
r
Text
r
Current title and chapter number
(Returns to top automatically)
When playing music or video files
Current file*1 or track*2 playing
time and number
r
Current file*1 or track name/MP3
ID3 track title*2
r
Current album and file*1 or
track*2 number
(Returns to top automatically)
*1 for video file
*2 for music file
When playing a VIDEO CD (without
PBC functions) or CD
Current track playing time and
number
r
Current track remaining time
r
Disc playing time
r
Disc remaining time
r
Text
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
9
Hookups and Settings
When unpacking, check the supplied accessories by referring to page 36.
b
• Plug cords securely to prevent unwanted noise.
• Refer to the operating instructions supplied with the components to be connected.
• Be sure to disconnect the mains lead of each component before connecting.
Step 1: Connecting to Your TV
Connect this player to your TV using an audio/video (SCART) cord. This connection will use
your TV speakers for sound.
INPUT
TV
SCART cord
(not supplied)
to LINE (RGB)-TV
CD/DVD player
l : Signal flow
SCART input jack
Be sure to make the connections firmly to
avoid hum and noise.
When using this connection, check that the
TV conforms to RGB signals. Refer to the
operating instructions supplied with the TV to
be connected. Also, when you set “LINE” to
“RGB” under “SCREEN SETUP” in the
Setup Display (page 28), use a SCART cord
that conforms to each signal.
When connecting to a standard 4:3 screen
TV
Some images may not fit your TV screen. To
change the picture size, see page 28.
b
• Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the
TV screen.
• When you connect the player to your TV via the
SCART jack, the TV’s input source is set to the
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
10
player automatically when you start playback. In
this case, press TV t (input select) on the
remote to return the input to the TV.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
Hookups and Settings
When you play a disc recorded in the NTSC
colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC
colour system and the picture may not
appear on the PAL colour system
televisions. In this case, open the tray and
remove the disc.
11
Step 2: Connecting to Your Audio Component
Select one of the following patterns A or B, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver).
This will enable you to listen to sound.
(red)
Audio cord
(not supplied)
(white)
INPUT
A
L
(white)
(red)
AUDIO
R
TV, projector, or
audio component
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL)
CD/DVD player
Coaxial digital cord
(not supplied)
[Speakers]
to coaxial
digital input
Rear (L)
[Speakers]
B
Rear (R)
Front (L)
Front (R)
Audio component
with a decoder
Centre
Subwoofer
: Signal flow
z
For correct speaker location, see the operating instructions supplied with the connected components.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
12
A Audio L/R input jacks
This connection will use your TV’s or audio
component’s two speakers for sound.
Step 3: Connecting the
Mains Lead
B Digital audio input jack
Plug the player and TV mains lead (power
cord) into a mains.
Step 4: Preparing the
Remote
Hookups and Settings
If your audio component has a Dolby*1
Digital, DTS*2, or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effect.
*1
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
*2 Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital Out are
registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 19962008 DTS, Inc. All Rights Reserved.
b
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 14).
If your audio component has an MPEG audio
decoder function, set “MPEG” to “MPEG” in
“AUDIO SETUP” (page 31). Otherwise, no
sound or a loud noise will come from your
speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 14).
Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the
markings inside the compartment. When
using the remote, point it at the remote sensor
on the player.
b
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
13
Controlling TVs with the remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
Available buttons
Depending on the connected unit, you may
not be able to control your TV using all or
some of the buttons on the supplied remote.
Buttons
Operations
TV [/1
Turn the TV on or off
2 (volume)
+/–
Adjust the volume of the
TV
TV t
(input select)
Switch the TV’s input
source between the TV and
other input sources
To control other TVs with the remote
You can control the volume, input source, and
power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
1
While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code.
2
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer
Code number
Sony
01 (default)
Hitachi
24
JVC
33
LG/Goldstar
76
Panasonic
17, 49
Philips
06, 08, 72
Samsung
71
Sharp
29
Toshiba
38
Step 5: Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
player.
To skip an adjustment, press >. To return
to the previous adjustment, press ..
1 Turn on the TV then press [/1.
2 Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 19).
3 Press ENTER without inserting a
disc.
The Language Setup Display appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
4 Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
5 Press ENTER.
The Screen Setup Display appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
14
ENGLISH
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
6 Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 28)
Dolby Digital signal to your audio
component.
7 Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
11Press X/x to select the type of
16:9
ON
JACKET PICTURE
VIDEO
VIDEO
RGB
8 Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
◆ Video signals
• VIDEO (page 28)
◆ RGB signals
• RGB (page 28)
9 Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
10Press X/x to select the type of
jack (if any) you are using to
connect to an audio component,
then press ENTER.
If your audio component has a Dolby
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
Hookups and Settings
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 28)
Select “YES: LINE OUTPUT L/R
(AUDIO),” if you connect an audio
component using an audio cord, then go
to step 14.
Select “YES: DIGITAL OUTPUT,” if
you connect an audio component using a
digital coaxial cord.
AUDIO SETUP
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL
DOLBY DIGITAL:
DOLBY DIGITAL
MPEG:
D-PCM
DTS:
48kHz/16bit
48kHz/96kHz PCM:
12Press ENTER.
“DTS” is selected.
AUDIO SETUP
AUDIO DRC:
STANDARD
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL
DOLBY DIGITAL:
MPEG:
PCM
DTS:
OFF
48kHz/96kHz PCM:
OFF
ON
13Press X/x to select whether or
not to send a DTS signal to your
audio component.
If your audio component has a DTS
decoder, select “ON.” Otherwise, select
“OFF.”
14Press ENTER.
Quick Setup is finished and connections
are complete.
If your audio component has an MPEG
audio decoder, set “MPEG” to “MPEG”
(page 31).
Select “NO,” if you do not connect an
audio component, then go to step 14.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
15
Playback
Playing Discs
1 Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
2 Press Z on the player, and place a
disc on the disc tray.
Playback side facing down
3 Press N.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the audio
component.
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 7. For VIDEO CDs,
see page 16.
If a disc is inside the player
Press N.
To stop playback
Press x.
To pause playback
Press X.
z
You can have the player turned off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF” (page 29).
b
• Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
• Discs created on DVD recorders must be correctly
finalized before they can be played. For more
information about finalizing, refer to the
operating instructions supplied with the DVD
recorder.
Note on playing DTS sound tracks on a
DVD VIDEO
DTS audio signals are output only through the
DIGITAL OUT (COAXIAL) jack.
To resume playback from the point where
you stopped the disc (Multi-disc Resume)
When you press N again after you stop
playback, the player starts playback from the
point when you pressed x.
z
• To play from the beginning of the disc, press x
twice, then press N.
• With DVD VIDEOs and VIDEO CDs, the player
stores the point where you stopped the disc for up
to 6 discs and resumes playback the next time you
insert the same disc. If you store a resume
playback point for the seventh disc, the resume
playback point for the first disc is deleted.
b
• “MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 29).
• Resume Play does not work during Shuffle Play
and Programme Play.
• With some discs, Resume Play may not work,
depending on the point you stop playback, or if
you press [/1.
To play VIDEO CDs with PBC functions
(PBC Playback)
PBC (Playback Control) allows you to play
VIDEO CDs interactively using the menu on
your TV screen.
When you start playing a VIDEO CD with
PBC functions, the menu for your selection
appears.
Select an item using the number buttons, and
press ENTER. Then, follow the instructions
in the menu (press N when “Press
SELECT” appears).
To return to the menu
Press O RETURN.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
16
z
To play without using PBC, press ./> or the
number buttons while the player is stopped to select
a track, then press N or ENTER.
“Play without PBC” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press x twice then
press N.
Playback
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
17
Control Menu display (Magic Pad)
Use the Control Menu to select a function and to view related information. Press DISPLAY
repeatedly to turn on or change the Control Menu display as follows:
, Control Menu display 1
m
Control Menu display 2 (Except CD and when “MEDIA” is set to “MUSIC”)
m
Control Menu display off
The Control Menu display 1 and 2 will show different items depending on the media type.
Example: Control Menu display 1 when playing a DVD VIDEO.
Press X/x to select the Control Menu item, then press ENTER.
For details about the item, see “List of Control Menu items” (page 19, 20).
Currently playing chapter number*2
Currently playing title number*1
Total number of titles*1
Total number of chapters*2
Control Menu items
Selected item
Function name of
selected Control
Menu item
Operation message
12(27)
18(34)
T
1:32:55
OFF
OFF
SET
ON
PLAY
DVD VIDEO
Quit: DISPLAY
*1 Displays the album number for video, photo, and
music files, scene number for VIDEO CDs (PBC
is on), and track number for VIDEO CDs/CDs.
*2 Displays the video, photo, music files numbers,
and index numbers for VIDEO CDs.
*3 Displays Super VCD as “SVCD.”
*4 Displays the date for photo files.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
18
Type of disc
being played*3
Playing time*4
Current setting
Options
PROGRAM
ENTER
Playback status
(N Playback,
X Pause,
x Stop, etc.)
List of Control Menu items
Item
Item Name, Function
TITLE/SCENE/TRACK
CHAPTER/INDEX
1
Press X/x to select the search
method.
“** (**)” is selected (** refers
to a number).
2
Press ENTER.
“** (**)” changes to “-- (**).”
3
Press the number buttons to
select the number you want to
search.
4
Press ENTER.
TIME/TEXT
Checks the elapsed time and the
remaining playback time.
Input the time code for picture and
music searching (DVD and DivX
video files only).
1
2
Press ENTER.
Input the time code using the
number buttons, then press
ENTER.
For example, to find the scene at
2 hours, 10 minutes, and 20
seconds after the beginning, just
enter “2:10:20.”
b
You cannot search for a scene on a
DVD+RW/DVD+R/DVD+R DL
using the time code.
PARENTAL CONTROL
(page 24)
Set to prohibit playback on this
player.
SETUP (page 14, 27)
QUICK:
Use Quick Setup to choose the
desired language of the on-screen
display, the aspect ratio of the TV
and the audio output signal.
CUSTOM:
In addition to the Quick Setup
setting, you can adjust various other
settings.
RESET:
Returns the settings in “SETUP” to
the default setting.
Playback
TRACK
Selects the title, scene, track,
chapter, or index to be played.
A-B REPEAT (page 23)
Specifies the parts you want to play
repeatedly.
ZOOM
Magnifies the image up to four times
the original size, and scroll using C/
X/x/c.
To return to normal view, press
CLEAR.
This function is available for all
pictures except a background image.
ANGLE
Changes the angle.
CUSTOM PICTURE MODE
(page 23)
Selects the picture quality that best
suits the programme you are
watching.
SHARPNESS (page 24)
Exaggerates the outline of the image
to produce a sharper picture.
ORIGINAL/PLAY LIST
Selects the type of titles (DVD-VR
mode) to be played, the ORIGINAL
one, or an edited PLAY LIST.
PROGRAM (page 21)
Selects the title, chapter, or track to
play in the order you want.
SHUFFLE (page 22)
Plays the title, chapter, or track in
random order.
REPEAT (page 22)
Plays all titles/tracks/albums or a
single title/chapter/track/album/file
repeatedly.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
19
TVS (TV Virtual Surround)
Selects surround sound effect when
connecting a stereo TV or 2 front
speakers. This only works when
playing a multichannel Dolby audio
sound track. Furthermore, if the
player is set up to output the signal
from the DIGITAL OUT
(COAXIAL) jack, the surround
effect will only be heard when
“DOLBY DIGITAL” is set to “DPCM” and “MPEG” is set to “PCM”
in “AUDIO SETUP” (page 30).
◆ Items for DATA discs
Item
The default setting is underlined.
• OFF
Cancels the setting.
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS WIDE
This mode is effective when the
distance between the front L and R
speakers is short, such as with builtin speakers on a stereo TV.
• TVS NIGHT
This feature is useful when you want
to hear the dialogue and enjoy the
surround sound effects of “TVS
WIDE” at low volume.
• TVS STANDARD
Use this setting when you want to
use TVS with 2 separate speakers.
b
• When you select one of the TVS
modes, turn off the surround setting
of the connected TV or audio
component.
• The TVS effects do not work when
using the Fast Play or Slow Play
functions, even though you can
change the TVS modes.
z
The Control Menu icon indicator lights up in green
t
when you select any item
except “OFF” (“PROGRAM,” “SHUFFLE,”
“REPEAT,” “A-B REPEAT,” “SHARPNESS,”
“ZOOM,” “TVS” only). The “ORIGINAL/PLAY
LIST” indicator lights up in green when you select
“PLAY LIST” (default setting). The “ANGLE”
indicator lights up in green when you can change
the angle. The “CUSTOM PICTURE MODE”
indicator lights up in green when any setting other
than “STANDARD” is selected.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
20
Item Name, Function
ALBUM
Selects the album that contains
music and photo files to be played.
FILE
Selects the photo file to be played.
ALBUM
Selects the album that contains video
file to be played.
FILE
Selects the video file to be played.
DATE
Displays the date the picture was
taken by a digital camera.
INTERVAL (page 26)
Specifies the duration for which the
slides are displayed on the screen.
EFFECT (page 26)
Selects the effects to be used for
changing slides during a slide show.
MEDIA
VIDEO: plays video files.
PHOTO/MUSIC: plays photo and
music files as a slide show.
PHOTO: plays photo files.
MUSIC: plays music files.
b
• For details on playable files, see
“Playable Media” page 34.
• Depending on the contents, the
player will play all files regardless of
the “MEDIA” settings.
3
Various Play Mode
Functions
Select the title, chapter, or track you
want to programme.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title
“02.”
Press X/x to select “02” under “T,” then
press ENTER.
PROGRAM
ALL CLEAR
1. TITLE – –
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
b
The play mode is cancelled when:
– you open the disc tray.
– you press [/1 and the player enters standby mode.
Creating your own
programme (Programme Play)
PROGRAM
ALL CLEAR
1. TITLE 0 2 – 0 3
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
After selecting
(PROGRAM)
on the Control Menu (page 18), press
X/x to select “SET t,” then press
ENTER.
ALL CLEAR
1. TITLE
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
◆ When playing a VIDEO CD or CD
For example, select track “02.”
Press X/x to select “02” under “T,” then
press ENTER.
T
––
01
02
03
04
05
Selected track
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
Press c.
The cursor moves to the title or track row
“T” (in this case, “01”).
PROGRAM
ALL CLEAR
1. TITLE – –
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
0:15:30
T
PROGRAM
Recorded titles or tracks
2
T
––
01
02
03
04
05
Selected title and chapter
“TRACK” is displayed when you play
a VIDEO CD or CD.
PROGRAM
C
ALL
01
02
03
04
05
06
Next, press X/x to select “03” under “C,”
then press ENTER.
You can play the contents in the order you
want. You can programme up to 99 titles,
chapters, and tracks.
1
T
––
01
02
03
04
05
Playback
You can set the following play modes:
• Programme Play (page 21)
• Shuffle Play (page 22)
• Repeat Play (page 22)
• A-B Repeat Play (page 23)
T
C
––
01
02
03
04
05
ALL
01
02
03
04
05
06
02
––
––
––
––
––
––
––
01
02
03
04
05
Total time of the programmed tracks
4
Repeat steps 2 to 3, to programme
other titles, chapters, or tracks.
The programmed titles, chapters, and
tracks are displayed in the selected order.
Recorded chapters
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
21
5
◆ When playing a DVD VIDEO
• TITLE
• CHAPTER
Press N.
Programme Play begins.
When the programme ends, you can
restart the same programme again by
pressing N.
◆ When playing a VIDEO CD or CD
• TRACK
◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks
selected in Programme Play
To return to normal play
Press CLEAR, or select “OFF” in step 1. To
play the same programme again, select “ON”
in step 1 and press ENTER.
2
Press ENTER.
Shuffle Play starts.
To change or cancel a programme
1
Follow step 1 of “Creating your own
programme (Programme Play).”
2
Select the programme number of the title,
chapter, or track you want to change or
cancel using X/x and press c. If you
want to delete the title, chapter, or track
from the programme, press CLEAR.
3
Follow step 3 of “Creating your own
programme (Programme Play)” for new
programming. To cancel a programme,
select “--” under “T,” then press ENTER.
To cancel all of the titles, chapters, or
tracks in the programmed order
Press X and select “ALL CLEAR” in step 2 of
“Creating your own programme (Programme
Play)” and press ENTER.
z
You can perform Repeat Play or Shuffle Play of
programmed titles, chapters, or tracks. During
Programme Play, follow the steps of Repeat Play
(page 22) or Shuffle Play (page 22).
b
• When you programme tracks on a Super VCD, the
total playing time is not displayed.
• You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
Playing in random order
(Shuffle Play)
You can have the player “shuffle” titles,
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order.
1
After selecting
(SHUFFLE) on
the Control Menu (page 18), press X/
x to select the item to be shuffled.
To return to normal play
Press CLEAR, or select “OFF” in step 1.
z
• You can set Shuffle Play while the player is
stopped. After selecting the “SHUFFLE” option,
press N. Shuffle Play starts.
• Up to 200 chapters in a disc can be played in
random order when “CHAPTER” is selected.
b
You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
Playing repeatedly
(Repeat Play)
You can play all of the titles or tracks, or a
single title, chapter, or track repeatedly.
You can use a combination of Shuffle or
Programme Play modes.
1
After selecting
(REPEAT) on
the Control Menu (page 18), press X/
x to select the item to be repeated.
• DISC: repeats all of the titles, tracks, or
albums. (Select ORIGINAL or PLAY
LIST in DVD-VR mode)
• TITLE: repeats the current title
• CHAPTER: repeats the current chapter
• TRACK: repeats the current track
• FILE (video files only): repeats the
current file
• ALBUM: repeats the current album
◆ When Programme Play or Shuffle Play
is activated
• ON: repeats Programme Play or Shuffle
Play
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
22
2
Press ENTER.
Customizing the
Playback Configuration
Repeat Play starts.
To return to normal play
Press CLEAR, or select “OFF” in step 1.
Repeating a specific
portion (A-B Repeat Play)
Adjusting the playback
picture (CUSTOM PICTURE MODE)
You can adjust the video signal from the
player to obtain the picture quality you want.
1
You can play a specific portion of a title,
chapter, or track repeatedly.
1
The “A-B REPEAT” setting bar appears.
2
B
During playback, when you find the
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
A 18 - 1:32:55
After selecting
(CUSTOM
PICTURE MODE) on the Control Menu
(page 18), press X/x to select the
setting you want.
The default setting is underlined.
• STANDARD: displays a standard
picture
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the colour intensity
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and colour intensity
• CINEMA 1: enhances details in dark
areas by increasing the black level
• CINEMA 2: white colours become
brighter and black colours become
richer, and the colour contrast is
increased
• MEMORYt: adjusts the picture in
greater detail
After selecting
(A-B REPEAT)
on the Control Menu (page 18), press
X/x to select “SET t,” then press
ENTER.
A 18 - 1:32:30
B 18 - 1:33:05
PICTURE
3
Playback
b
You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
Changes the contrast.
BRIGHTNESS Changes the overall
brightness.
When you reach the ending point
(point B), press ENTER again.
COLOR
Makes the colours
deeper or lighter.
The set points are displayed and the
player starts repeating this specific
portion.
HUE
Changes the colour
balance.
2
To return to normal play
Press CLEAR, or select “OFF” in step 1.
b
• A-B Repeat Play does not work across multiple
titles.
• You may not set A-B Repeat Play for contents in
DVD-VR mode that contains still pictures.
Press ENTER.
The selected setting takes effect.
z
When you watch a movie, “CINEMA 1” or
“CINEMA 2” is recommended.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
23
Sharpening the picture
Parental Control (limited playback)
(SHARPNESS)
You can set a playback limitation level.
You can enhance the outlines of images to
produce a sharper picture.
1
After selecting
(PARENTAL
CONTROL) on the Control Menu
(page 18), press X/x to select “PLAYER
t,” then press ENTER.
The password is required.
2
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
The display for setting the playback
limitation level appears.
3
Press X/x to select “STANDARD,” then
press ENTER.
The selection items for “STANDARD”
are displayed.
4
Press X/x to select a geographic area as
the playback limitation level, then press
ENTER.
The area is selected.
When you select “OTHERS t,” select
and enter a standard code in the table on
page 37 using the number buttons.
5
Press X/x to select “LEVEL,” then press
ENTER.
The selection items for “LEVEL” are
displayed.
6
Select the level you want using X/x, then
press ENTER.
Parental Control setting is complete.
The lower the value, the stricter the
limitation.
1
After selecting
(SHARPNESS)
on the Control Menu (page 18), press
X/x to select a level.
The default setting is underlined.
• OFF: cancels this option
• 1: enhances the outline
• 2: enhances the outline more than 1
2
Press ENTER.
The selected setting takes effect.
Locking discs (PARENTAL
CONTROL)
You can set two kinds of playback restrictions
as following:
• Custom Parental Control
• Parental Control
After selecting
(PARENTAL
CONTROL) on the Control Menu (page 18),
the options appear as shown below.
Select the option you want.
The default setting is underlined.
• ON t: Sets the playback restrictions so
that the player will not play inappropriate
discs (Custom Parental Control)
• PLAYER t: Playback of some DVD
VIDEOs can be limited according to a
predetermined level such as the age of the
users. Scenes may be blocked or replaced
with different scenes (Parental Control).
See “Parental Control (limited playback)”
(page 24) for detailed settings
• PASSWORD t: Enter a 4-digit password
using the number buttons. The same
password is used for both Custom Parental
Control and Parental Control. Also use this
menu to change the password
• OFF t: Turns off the Custom Parental
Control function
To turn off the Parental Control function,
set “LEVEL” to “OFF.”
z
If you forget your password, remove the disc and
repeat step 1 of “Parental Control (limited
playback).” When you are asked to enter your
password, enter “199703” using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press N. When the display for entering
your password appears, enter your new password.
b
Depending on the disc, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the
level. If the Resume Play mode is cancelled, the
level returns to the previous level.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
24
To play music with lyrics
Playing Video, Photo,
and Music Files
The player can play video, photo, or music
files. For details on playable files, see
“Playable Media” page 34.
1 Press MENU.
The list of albums appears.
2 Press X/x to select the album.
3 Press N.
Playback starts from the selected album.
To select a specific video or music file,
press ENTER and press X/x to select a
track or file, and then press ENTER.
To select a specific photo file, see
“Selecting a photo file” (page 25).
z
• By setting “MEDIA” to “PHOTO/MUSIC,” you
can view a slideshow with sound when the music
and photo files are placed in the same album.
• Set “MEDIA” to “MUSIC” to enable lyrics
function.
• Depending on the contents, the player will play all
files regardless of the “MEDIA” settings.
• If the number of viewing times is preset, you can
play DivX video files as many times as the preset
number. The following occurrences are counted:
– when the disc tray is opened.
– when another file is played.
– when “MEDIA” settings are changed.
Playback
b
DATA CDs recorded in KODAK Picture CD
format automatically start playing when inserted.
Press SUBTITLE while playing music files
that contain unsynchronized lyric
information. To display next/previous line,
press X/x.
b
The player supports MP3 ID3 Lyrics only.
Selecting a photo file
1
Press MENU.
The list of albums appears.
2
To stop playback
Press X/x to select the album, then
press PICTURE NAVI.
The image files in the album appear in 16
subscreens. A scroll box is displayed on
the right.
Press x.
To go to the next or previous page
Press c or C.
1
2
3
4
Press O RETURN.
5
6
7
8
To go to the next or previous music and
video files
9
10
11
12
Press > or . during playback.
Note that you cannot return to the previous
album by using ., and that you need to
select the previous album from the album list.
13
14
15
16
To return to the previous display
To turn the display on or off
Press MENU repeatedly.
To display additional images, select a
bottom image and press x. To return to a
previous image, select a top image and
press X.
3
Press C/X/x/c to select the image you
want to view, and press ENTER.
The selected image appears.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
25
To go to the next or previous photo file
Press C or c during playback.
Note that you cannot return to the previous
album by using C. Select the previous album
from the album list.
To rotate a photo image
Press X/x while viewing the image. Each
time you press X, the image rotates
counterclockwise by 90 degrees.
To return to normal view, press CLEAR.
Note that the view also returns to normal if
you press C/c to go to the next or previous
image.
Selecting the slides’
appearance (EFFECT)
You can select the way the slides are
displayed during a slide show.
1
The default setting is underlined.
• MODE 1: the images randomly cycle
through the effects
• MODE 2: the next image sweeps in
from top left to bottom right
• MODE 3: the image sweeps in from top
to bottom
• MODE 4: the image sweeps in from left
to right
• MODE 5: the image stretches out from
the centre of the screen
• OFF: turns off this function
To display photo information
Press SUBTITLE while viewing photo files.
The detailed information for the selected
photo file appears.
is displayed when the picture was taken
using flash.
is displayed when the image is
automatically rotated.
To hide the information, press SUBTITLE.
Note that the above information may not
appear depending on the digital camera.
After selecting
(EFFECT) on
the Control Menu (page 18), press X/
x to select a setting.
2
Press ENTER.
To stop viewing the photo
Press x.
b
PICTURE NAVI does not work if “MUSIC” is
selected in “MEDIA” (page 20).
Setting the pace for a
slide show (INTERVAL)
You can set the time the slides are displayed
on the screen.
1
After selecting
(INTERVAL) on
the Control Menu (page 18), press X/
x to select a setting.
The default setting is underlined.
• NORMAL: sets to standard duration
• FAST: sets a duration shorter than
NORMAL
• SLOW 1: sets a duration longer than
NORMAL
• SLOW 2: sets a duration longer than
SLOW 1
2
Press ENTER.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
26
Settings and Adjustments
Using the Setup Display
You can make various adjustments to items,
such as picture and sound.
For details on each Setup Display item, see
pages from 27 to 31.
1 Press DISPLAY when the player is
in stop mode.
The Control Menu appears.
2 Press X/x to select
(SETUP), then press ENTER.
The options for “SETUP” appear.
• QUICK: makes the basic adjustments
(page 14)
• CUSTOM: makes various adjustments
• RESET: resets all the settings explained
on pages 27 to 31
3 Press X/x to select “CUSTOM,”
then press ENTER.
The Setup Display appears.
Select the setup category and adjust each
item following the instructions on pages
27 to 31.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
You can set various languages for the onscreen display or sound track.
◆ OSD (On-Screen Display)
Switches the display language on the screen.
◆ MENU (DVD VIDEO only)
You can select the desired language for the
disc’s menu.
◆ AUDIO (DVD VIDEO only)
Switches the language of the sound track.
When you select “ORIGINAL,” the language
given priority in the disc is selected.
◆ SUBTITLE (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select “AUDIO FOLLOW,” the
language for the subtitles changes according
to the language you selected for the sound
track.
Settings and Adjustments
b
Playback settings stored in the disc take priority
over the Setup Display settings and not all of the
functions described may work.
LANGUAGE SETUP
z
If you select “OTHERS t” in “MENU,”
“SUBTITLE,” or “AUDIO,” select and enter a
language code from “Language Code List” on
page 37 using the number buttons.
b
If you select a language in “MENU,”
“SUBTITLE,” or “AUDIO” that is not recorded on
a DVD VIDEO, one of the recorded languages will
be automatically selected.
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
27
SCREEN SETUP
Choose settings according to the TV to be
connected.
The default settings are underlined.
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9
Select this when connecting to a
wide-screen TV or a TV with a
wide mode function.
4:3
LETTER
BOX
Select this when connecting to a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3
Select this when connecting to a
PAN SCAN 4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
4:3 LETTER BOX
ON
Turns on the screen saver.
OFF
Turns off the screen saver.
◆ BACKGROUND
Selects the background colour or picture on
the TV screen when the player is in stop mode
or while playing a CD, or music files.
JACKET
PICTURE
GRAPHICS A preset picture stored in the
player appears.
BLUE
The background colour is blue.
BLACK
The background colour is
black.
◆ LINE
Selects video signals output from the LINE
(RGB)-TV jack on the rear panel of the
player.
VIDEO
Outputs video signals.
RGB
Outputs RGB signals.
b
If your TV does not accept the RGB signals, no
picture will appear on the TV screen, even if you
select “RGB.” Refer to the operating instructions
supplied with your TV.
4:3 PAN SCAN
b
Depending on the DVD, “4:3 LETTER BOX” may
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
◆ SCREEN SAVER
The screen saver image appears when the
player in pause or stop mode for 15 minutes,
or when you play a CD, or music files for
more than 15 minutes. The screen saver will
help prevent your display device from
becoming damaged (ghosting). Press N to
turn off the screen saver.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
28
The jacket picture (still picture)
appears, but only when the
jacket picture is already
recorded on the disc (CDEXTRA, etc.). If the disc does
not contain a jacket picture, the
“GRAPHICS” picture appears.
CUSTOM SETUP
◆ TRACK SELECTION (DVD VIDEO only)
Use this to set up playback related and other
settings.
Gives the sound track which contains the
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
formats (PCM, MPEG audio, DTS, or Dolby
Digital format) are recorded.
The default settings are underlined.
OFF
No priority given.
◆ AUTO POWER OFF
AUTO
Priority given.
Switches the Auto Power Off setting on or
off.
The player enters standby mode
when left in stop mode for more
than 30 minutes.
OFF
Switches this function off.
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
OFF
Switches this function off.
ON
Automatically starts playback
when the player is turned on by
a timer (not supplied).
◆ DIMMER
Adjusts the lighting of the front panel display.
BRIGHT
Makes the lighting bright.
DARK
Makes the lighting dark.
◆ MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback can be stored in
memory for up to 6 different DVD VIDEOs/
VIDEO CDs (page 16).
ON
Stores the resume setting in
memory for up to 6 discs.
OFF
Does not store the resume
setting in memory. Playback
restarts at the resume point only
for the current disc in the player.
◆ PAUSE MODE (DVDs only)
Selects the picture in pause mode.
AUTO
FRAME
The picture, including subjects
that move dynamically, is
output with no jitter. Normally,
select this position.
The picture, including subjects
that do not move dynamically,
is output in high resolution.
Settings and Adjustments
ON
b
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 27).
• If you set “DTS” to “OFF” (page 31), the DTS
sound track is not played even if you set “TRACK
SELECTION” to “AUTO.”
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, DTS, MPEG audio, and
Dolby Digital sound tracks in this order.
b
If you run Quick Setup, Multi-disc Resume setting
stored in memory may return to the default settings
◆ DivX
Displays the registration code for this player.
For more information, go to
http://www.divx.com/vod
on the Internet.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
29
AUDIO SETUP
You can set the sound according to the
playback and connection conditions.
◆ DIGITAL OUT
Selects if audio signals are output via the
DIGITAL OUT (COAXIAL) jack.
ON
Normally, select this position.
When you select “ON,” see
“Setting the digital output signal”
for further settings.
OFF
The influence of the digital
circuit upon the analogue circuit
is minimal.
The default settings are underlined.
◆ AUDIO DRC (Dynamic Range Control)
(DVDs only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to “AUDIO DRC.”
This function affects the output from the
following jacks:
– LINE OUT L/R (AUDIO) jacks.
– LINE (RGB)-TV jack.
– DIGITAL OUT (COAXIAL) jack only
when “DOLBY DIGITAL” is set to
“D-PCM” (page 30).
STANDARD Normally, select this position.
TV MODE
Makes low sounds clear even if
you turn the volume down.
WIDE
RANGE
Gives you the feeling of being
at a live performance.
Setting the digital output signal
Switches the method of outputting audio
signals when you connect a component such
as an audio component or MD deck with a
digital input jack.
For connection details, see page 12.
Select “DOLBY DIGITAL,” “MPEG,”
“DTS,” and “48kHz/96kHz PCM” after
setting “DIGITAL OUT” to “ON.”
If you connect a component that is
incompatible with the selected audio signal, a
loud noise (or no sound) may be heard from
the speakers, risking damage to your ears or
speakers.
◆ DOWNMIX (DVDs only)
◆ DOLBY DIGITAL (DVDs only)
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. This function affects
the output of the following jacks:
– LINE OUT L/R (AUDIO) jacks.
– LINE (RGB)-TV jack.
– DIGITAL OUT (COAXIAL) jack when
“DOLBY DIGITAL” is set to “D-PCM”
(page 30).
Selects the type of Dolby Digital signal.
DOLBY
SURROUND
Normally, select this position.
Multi-channel audio signals are
output to 2 channels for enjoying
surround sounds.
NORMAL
Multi-channel audio signals are
downmixed to 2 channels for use
with your stereo.
DOLBY
DIGITAL
Select this when the player is
connected to an audio
component with a built-in
Dolby Digital decoder.
D-PCM
Select this when the player is
connected to an audio
component without a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
“DOWNMIX” item in
“AUDIO SETUP” (page 30).
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
30
◆ MPEG (DVDs only)
Selects the type of MPEG audio signal.
Select this when the player is
connected to an audio
component without a built-in
MPEG decoder. If you play
multi-channel MPEG audio
sound tracks, only the Front (L)
and Front (R) signals will be
output from your two front
speakers.
MPEG
Select this when the player is
connected to an audio
component with a built-in
MPEG decoder.
◆ DTS
Selects whether or not to output DTS signals.
OFF
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
ON
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
Settings and Adjustments
PCM
b
The analogue audio signals from the LINE OUT
L/R (AUDIO) jacks are not affected by this setting
and keep their original sampling frequency level.
• When you play a DVD VIDEO with DTS
sound tracks, set “DTS” to “ON” in
“AUDIO SETUP” (page 31).
• If you connect the player to audio
equipment without a DTS decoder, do not
set “DTS” to “ON” in “AUDIO SETUP”
(page 31). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
◆ 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
31
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
The power is not turned on.
, Check that the mains lead is connected
securely.
Picture
There is no picture/picture noise appears.
, Re-connect the connecting cord securely.
, The connecting cords are damaged.
, Check the connection to your TV (page 10)
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
, Set “LINE” in “SCREEN SETUP” to an
item appropriate for your TV (page 28).
, The disc is dirty or flawed.
, The disc is recorded in a colour system that
is different from your TV.
The picture is black and white.
, Set “LINE” in “SCREEN SETUP” to an
item appropriate for your TV (page 28).
, Depending on the TV, the picture on the
screen becomes black and white when you
play a disc recorded in the NTSC colour
system.
, When you are using a SCART cord, be sure
to use one that is fully wired (21-pins).
, The player is in fast forward or fast reverse
mode.
, If the audio signal does not come through
the DIGITAL OUT (COAXIAL) jack,
check the audio settings (page 30).
, While playing a Super VCD on which the
audio track 2 is not recorded, no sound will
come out when you select “2:STEREO,”
“2:1/L,” or “2:2/R.” Press AUDIO to select
the recorded track.
, When playing multichannel MPEG audio
sound tracks, only the Front (L) and Front
(R) signals will be output from two front
speakers.
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“AUDIO DRC” in “AUDIO SETUP” to
“TV MODE” (page 30).
Operation
The remote does not function.
, The batteries in the remote are weak.
, There are obstacles between the remote and
the player.
, The distance between the remote and the
player is too far.
, The remote is not pointed at the remote
sensor on the player.
The disc does not play.
, The disc is turned over.
Insert the disc with the playback side facing
down.
, The disc is skewed.
, The player cannot play certain discs
(page 3).
, The region code on the DVD does not match
the player.
, Moisture has condensed inside the player
(page 4).
, The player cannot play a recorded disc that
is not correctly finalized (page 35).
Sound
There is no sound.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input
jack on the audio component (page 12).
, The audio component input is not correctly
set.
, The player is in pause mode or in Slowmotion Play mode.
The album/track/file names are not
displayed correctly.
, The player can only display numbers and
alphabet. Other characters are displayed as
“*”.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
32
The disc does not start playing from the
beginning.
Self-diagnosis Function
, Programme Play, Shuffle Play, Repeat Play,
or A-B Repeat Play is selected (page 21).
, Resume play has taken effect (page 16).
(When letters/numbers appear on the
“Copyright lock” appears and the screen
turns blue when playing in DVD-VR mode.
Some functions such as Stop, Fast Play,
Slow Play, Slow-motion Play, Repeat
Play, Shuffle Play, or Programme Play
cannot be performed.
, Depending on the disc, you may not be able
to do some of the operations above.
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen. In this case, check the
following table.
First three
characters of
the service
number
Cause and/or corrective
action
C 13
The disc is dirty or recorded
in a format that this player
cannot play (page 34).
, Clean the disc with a
cleaning cloth or check its
format.
C 31
The disc is not inserted
correctly.
, Re-insert the disc
correctly.
The player does not operate properly.
Additional Information
, Images taken from digital broadcasts, etc.,
may contain copy protection signals, such
as complete copy protection signals, single
copy signals, and restriction-free signals.
When images that contain copy protection
signals are played, a blue screen may appear
instead of the images. It may take a while
when looking for playable images. (For
player that cannot play images that contain
a copy protection only)
screen)
, When static electricity, etc., causes the
player to operate abnormally, unplug the
player.
5 numbers or letters are displayed on the
screen.
, The self-diagnosis function was activated.
(See the table on page 33.)
The disc tray does not open and “LOCKED”
appears on the front panel display.
, Child Lock is set (page 8).
The disc tray does not open and “TRAY
LOCKED” appears on the front panel
display.
, Contact your Sony dealer or local
authorized Sony service facility.
“Data error” appears on the TV screen
when playing video, photo, and music
files.
, The video, photo, and music files you want
to play is broken.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
33
Playable Media
Type
Disc Logo
Icon
DVD VIDEO
• Commercial DVD
• DVD+RWs/DVD+Rs/
DVD+R DLs in +VR mode
• DVD-RWs/DVD-Rs/DVD-R
DLs in video mode
DVD-VR mode
• DVD-RWs/DVD-Rs/DVD-R
DLs in VR (Video
Recording) mode
CD
• Music CD
• CD-Rs/CD-RWs in music
format
VIDEO CD
• Super VCDs
• CD-Rs/CD-RWs in video
CD/Super VCD format
• DATA CD/DATA DVD
containing video, photo, or
music files
DATA disc
–
Notes about video, photo, or
music files that the player can
play
The player can play the following files:
File Type
File format
Extension
Video
DivX*1
“.avi” or
“.divx”
MPEG-1*2
“.mpg” or
“.mpeg”
MPEG-4
(simple
profile)*3
“.mp4” or
“.m4v”
JPEG
“.jpeg” or
“.jpg”
Photo
Music
MP3*4
“.mp3”
WMA*3
“.wma”
AAC*3
“.m4a”
LPCM/WAVE “.wav”
*1
DivX®
is a video file compression technology,
developed by DivX, Inc.
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
2 Only support movie data of cyber shot.
*
*3 Files with copyright protection (Digital Right
Management) cannot be played.
*4 MP3 (MPEG-1 Audio Layer III) is a standard
format defined by ISO (International
Organization for Standardization)/IEC
(International Electrotechnical Commission)
MPEG which compresses audio data.
The player will play any file in the above
table, even if the file format differs. Playing
such data may generate noise that can result
in speaker damage. The player can play the
following files:
• Photo files that conform to the DCF*
image file format.
• DATA CDs recorded according to ISO
9660** Level 1/Level 2, or its extended
format, Joliet.
• DATA DVDs recorded according to UDF
(Universal Disk Format).
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by JEITA
(Japan Electronics and Information Technology
Industries Association).
** A logical format of files and folders on CDROMs, defined by ISO (International
Organization for Standardization).
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
34
Characteristic
z
• If you add numbers (01, 02, 03, etc.) to the front
of the file names, the files will be played in that
order.
• To play a complex hierarchy of folders may take
some time. Create albums with no more than two
hierarchies.
• Set “MEDIA” to “PHOTO/MUSIC” to repeat
both music and photo files. See “Playing
repeatedly (Repeat Play)” page 22.
Region code
Your player has a region code printed on the
back of the unit and only will play
commercial DVDs (playback only) labelled
with identical region codes. This system is
used to protect copyrights.
Commercial DVDs labelled
play on this player.
ALL
DVP–XXXX
X
00V 00Hz
NO.
Region code
00W
0-000-000-00
b
• Notes about recordable media
Some recordable media cannot be played on this
player due to the recording quality or physical
condition of the disc, or the characteristics of the
recording device and authoring software.
The disc will not play if it has not been correctly
finalized. For more information, refer to the
operating instructions for the recording device.
Note that some playback functions may not work
with some DVD+RWs/DVD+Rs/DVD+R DLs,
even if they have been correctly finalized. In this
case, view the disc by normal playback. Also
some DATA discs created in Packet Write format
cannot be played.
• Music discs encoded with copyright protection
technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Various music discs encoded with copyright
protection technologies are marketed by some
record companies. Please be aware that among
those discs, there are some that do not conform to
the CD standard and may not be playable by this
product.
• For player that cannot play images that
contain a copy protection only
Images in DVD-VR mode with CPRM*
protection may not be played if they contain a
copy protection signal, “Copyright lock” appears
on the screen.
* CPRM (Content Protection for Recordable
Media) is a coding technology that protects the
copyright of images.
• Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
Additional Information
b
• Some video, photo, and music files may not play,
depending on the encoding/recording condition.
• To start playback and proceed to the next or
another album may take some time.
• The player cannot play music files in mp3PRO or
WMA Pro format.
• If the playing time of either music or photo is
longer, the longer one continues without sound or
image.
• To display Progressive photo files or photo files
of 3,000,000 pixels or more may take time and the
duration may seem longer than your selected
setting.
• The player will recognize a maximum of 200
albums, regardless of the selected mode. It can
recognize up to 300 music files and 300 photo
files when “PHOTO/MUSIC” is selected, 600
music files when “MUSIC” is selected, 600 photo
files when “PHOTO” is selected, and 600 video
files when “VIDEO” is selected.
• The player may not play a combination of two or
more video files.
• The player cannot play a video file of size more
than 720 (width) × 576 (height)/2 GB.
• The player may not play certain video files that
are longer than 3 hours.
• Depending on the file, normal playback may not
be possible. The picture may be unclear, playback
may not appear smooth, the sound may skip, etc.
You are recommended to create the file at a lower
bit rate.
• The player may not playback the high bit rate
video file on the DATA CD smoothly. You are
recommended to playback using DATA DVD.
• When playing visual data that is not supported by
MPEG-4 format, only sound will be heard.
Depending on the commercial DVD, there
may be no region code indication, even
though playing the commercial DVD is
prohibited by area restrictions.
will also
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
,continued
35
Note on playback operations of
DVDs and VIDEO CDs
Specifications
Some playback operations of DVDs and
VIDEO CDs may be intentionally set by
software producers. Since this player plays
DVDs and VIDEO CDs according to the disc
contents the software producers designed,
some playback features may not be available.
Also, refer to the operating instructions
supplied with the DVDs or VIDEO CDs.
System
About MPEG-4 VISUAL
THIS PRODUCT IS LICENSED UNDER
THE MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL
USE OF A CONSUMER FOR DECODING
VIDEO IN COMPLIANCE WITH THE
MPEG-4 VISUAL STANDARD (“MPEG-4
VIDEO”) THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED BY MPEG
LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND
COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA,
LLC. SEE HTTP://WWW.MPEGLA.COM
Laser: Semiconductor laser
Outputs
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO):
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
LINE (RGB)-TV:
(AUDIO): SCART jack/2 Vrms/10 kilohms
(VIDEO): SCART jack/1.0 Vp-p/75 ohms
(RGB): SCART jack/0.7 Vp-p/75 ohms
General
Power requirements:
220 – 240 V AC, 50/60 Hz
Power consumption: 8 W
Dimensions (approx.):
430 × 43 × 207 mm (width/height/depth)
incl. projecting parts
Mass (approx.): 1.6 kg
Operating temperature: 5 °C to 35 °C
Operating humidity: 25 % to 80 %
Supplied accessories
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
Specifications and design are subject to
change without notice.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
36
Language Code List
For details, see pages 6, 27.
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1061
1066
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
1334
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
1181
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali;
Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian;
Lettish
1345 Malagasy
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
1506
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan)Oromo
Oriya
Punjabi
Polish
Pashto;
Pushto
Portuguese
Quechua
RhaetoRomance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
SerboCroatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Additional Information
Code Language
1703 Not specified
Parental Control Area Code List
For details, see page 24.
Code Area
Code Area
Code Area
Code Area
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2248
2238
2254
2276
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2528
2184
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
Spain
Sweden
Switzerland
Thailand
United
Kingdom
37
Index
Numerics
E
16:9 28
4:3 LETTER BOX 28
4:3 PAN SCAN 28
48kHz/96kHz PCM 31
5.1 Channel Surround 13
EFFECT 20, 26
A
A-B REPEAT 19, 23
A-B Repeat Play 23
Advance 7
ALBUM 20
ANGLE 19
AUDIO 27
AUDIO DRC 30
AUDIO SETUP 30
AUTO PLAY 29
AUTO POWER OFF 29
B
F
Fast forward 7
Fast reverse 7
FAST/SLOW PLAY 7
FILE 20
Front panel display 9
H
Handling discs 3
I
ID3 tag 6
INDEX 19
INTERVAL 20, 26
J
JPEG 34
BACKGROUND 28
Batteries 13
L
C
LANGUAGE SETUP 27
LINE 28
CD 16, 34
CHAPTER 19
CHAPTER VIEWER 6
Child Lock 8
Connecting 10
Continuous play
CD/VIDEO CD 16
DVD 16
Control Menu 18
CUSTOM 27
Custom Parental Control 24
CUSTOM PICTURE MODE
19, 23
CUSTOM SETUP 29
D
DATA CD 34
DATA DVD 34
DATE 20
DIGITAL OUT 30
Digital output 30
DIMMER 29
Display
Control Menu display 18
Front panel display 9
Setup Display 27
DivX® 29
DOLBY DIGITAL 30
DOWNMIX 30
DTS 31
DVD 7, 16
DVD+RW 7, 34
DVD-RW 34
M
MEDIA 20
MEMORY 23
MENU 27
MP3 34
MPEG 31
MULTI-DISC RESUME 16, 29
O
On-screen display
Control Menu display 18
Setup Display 27
ORIGINAL 19
ORIGINAL/PLAY LIST 19
OSD 27
P
PARENTAL CONTROL 19,
24
PAUSE MODE 29
PBC Playback 16
PICTURE NAVI 6, 25
PLAY LIST 19
Playable Media 34
PROGRAM 19, 21
Programme Play 21
Q
QUICK 19
Quick Setup 14
R
Remote 6, 13, 14
REPEAT 19, 22
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
38
Repeat Play 22
Replay 7
RESET 19
S
SCENE 19
SCREEN SAVER 28
SCREEN SETUP 28
SETUP 19, 27
Setup Display 27
SHARPNESS 19, 24
SHUFFLE 19, 22
Shuffle Play 22
Slow-motion Play 7
SUBTITLE 26, 27
T
TIME/TEXT 19
TITLE 19
TITLE VIEWER 6
TRACK 19
TRACK SELECTION 29
TRACK VIEWER 6
Troubleshooting 32
TV TYPE 28
TVS 20
V
VIDEO CD 16, 34
Z
ZOOM 19
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
z To find out useful hints, tips and information about Sony products and services
please visit: www.sony-europe.com/myproduct
Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free
vegetable oil based ink.
Sony Corporation
Printed in MalaysiaSherwood Manuals
Downloaded
From DvDPlayer-Manual.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement