Valve position indicator total program for BHH/BHHF actuators

Valve position indicator total program for BHH/BHHF actuators
Data sheet
VPI-02
Sheet No.: VPI02.01 RevA
Date: October 2010
Valve position indicator total program for BHH/
BHHF actuators
Valve position indicator — type VPI
The Bettis Volumetric Position Indicator type VPI is designed to locally or remotely
indicate the position of hydraulically operated Actuators with determined displacement.
The VPI can be placed assembled with the directional valve on a common manifold remote
from the Actuator, thus avoiding cables and direct mounted installations in the field and the
costs involved. In this way the problems are overcome as to detecting the valve position,
when the Actuator is submerged and/or installed in Hazardous Areas.
The VPI continuously indicates the position of the valve by measuring the actual quantity of
oil flowing to or from its Actuator. The VPI is preset by Bettis to match the specific Actuator
displacement.
The rendered indication is proportional to the displaced oil and thus to the actual Actuator
position.
The total VPI program includes possibilities of pressure and temperature compensation, and
the program is designed for solving indication purposes in any environment.
The VPI program is designed for mounting of standard CETOP-3 components.
Hydraulic data:
Max. working pressure:
Filtration requirement:
Test pressure:
Hydraulic medium:
Burst pressure:
Max. flow:
Temperature range:
Min. flow:
Viscosity range:
Connection face:
www.Bettis.com
135 bar (1958 PSi)
25 μm nominal
205 bar (2973 PSi)
Acid-free hydraulic oil
> 525 bar (7615 PSi)
100 cm3/sec (6 l/min)
-20°C to 80°C (-4°F to +176°F)
3 cm3/sec (0.2 l/min)
15-200cSt DIN 24340 Cetop-3/VPI connection
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
VPI-02
Sheet No.: VPI02.01 RevA
Date: October 2010
Total program:
VPI Indicator:
The Valve Position Indicator is
available in 3 versions:
• VPI-V:
Visual indication
• VPI-E:
Visual + electrical
open/closed
indication (switches)
• VPI-C:
Visual + electrical
analog (potentiometer)
indication
TC-block:
PTC-block
Temperature compensating block for
indication of end positions (VPI-V and -E).
The TC-Block allows the compression/
decompression of the oil in the system
caused by major temperature and
pressure variations, without influencing
the indicator and ensures fixed el. on/off
remote indication signal. The TC-Block
is provided with CETOP-3 connection for
mounting of pilot valve.
Pressure and temperature compensating
block primarily for analog indication (VPI-C).
The PTC-Block allows the compression/
decompression of the oil in the system
caused by major temperature and pressure
variations, without influencing the
indicator, and ensures precise
intermediate positions, as the positioning
is always made at constant pressure (5
bar). The PTC-Block is provided with
CETOP-3 connection for mounting of
solenoid pilot valve.
Survey of combinations:
The VPI always consists of a VPI indicator
and a VPI block (TC or PTC).
General combinations:
1. VPI-V-TC: Visual indication
2. VPI-E-TC: Electrical/visual
on/off indication
3. VPI-C-PTC: Electrical/visual
analog indication
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement