V-Moda | Headphone | User manual | V-Moda Headphone User manual

V-Moda Headphone User manual
verza manual v1.0
1
PRACTICE SAFE SOUND
Enjoy your music responsibly by practicing safe sound. Listening to headphones at too high of volumes for
extended periods of time will result in permanent hearing loss. V-MODA Faders by Ear Armor helps prevent
tinnitus and hearing loss at events such as clubs, concerts, music practice and races.
Reveal more at V-MODA.com/FADERS.
Safe sound tips:
• Turn down the volume - start at zero and then slowly increase volume
• Limit listening time - give your hearing a “time out” every 30 minutes
• Know the masters - every song is unique, beware of spikes in volume
Be aware of your surroundings
Do not use headphones during activities such as driving, bicycling or jogging while on public roads. Many
states have laws prohibiting such actions.
Caution around children
Keep out of reach of children; the parts included with this product can be a choking hazard.
WELCOME TO THE GREAT REVELATION OF SOUND
Thank you for purchasing VAMP VERZA (hereinafter called VERZA). You are very wise and have exquisite
taste. VERZA is a mobile Hi-Fi component that produces pure audio and is a unique symbol for the
modern audiophile. VERZA takes the digital output from your iPhone / iPod/ iPad and computers/ android
devices with USB audio output. VERZA uses TWO dedicated Hi-Fi DACs (digital-to-analog convertor)
and amplifier for pure, powerful sound. VAMP also features BASS function that provides extra bass
accentuation for various musical tastes, and 3D function for creating a 3-dimensional sound stage for movies.
VERZA also includes a DD (Digital-to-Digital) conversion function that outputs digital sound data from the
iPhone as optical audio (S/PDIF).
Play Hard. Rock Harder.
Package Contents
1. VERZA Headphone Amplifier, DAC and Battery Pack
2. USB to Micro USB cable
3. 30-pin connector
4. Micro USB to Micro USB cable
5. 2x Rubber Bands
6. Quiqcard – Quick user manual
* iPod/iPhone and headphones are not included.
Available Accessories
V-MODA headphones, Metallo phone cases and Tuono (lightning cable) may be ordered at V-MODA.com.
verza manual v1.0
2
Table of Contents
Before Using
Compatible Models of iPod/iPhone and Computer (OS)
Quiqcard – Quick Start
Name and Function of Each Part
Front panel
Rear panel
Side panel
Checking the Remaining Battery of VERZA
Charging the Built-in Battery of VERZA
Disposing of the battery
Connecting VERZA with iPod/iPhone
Listening to Music in iPod/iPhone
in VERZA “VAMP” Mode
Charging iPod/iPhone by the Built-in Battery
in VERZA "Ϟ +VAMP" Mode
Connecting VERZA with Computer.
Synchronizing with iPod/iPhone and iTunes
on Computer in VERZA "iSYNC" Mode
Listening to Music on Computer
in VERZA "USB DAC" Function
Setting Other Functions



Setting Volume
Setting Bass Boost
Setting 3D (3D surround)


Setting Gain
How to Reset (restoring factory settings)
Specifications
Disclaimers
Trademarks and Registered Trademarks
Product Support
verza manual v1.0
3
Before Using
Make sure to confirm the contents in the package before using.
Contact the retailer where the product was purchased if there is anything missing.
Compatible Models of iPod/iPhone and Computer (OS)

iPod nano (Sixth generation)
iPod touch (Fourth generation)

iPhone 3GS iPhone 4 iPhone 4S iPhone 5

PC, Mac (OS) Windows:

Mac: OS X v10.5 Leopard or later

Android devices with USB audio output
verza manual v1.0
7/Vista/XP SP3 or later (32 bit/64 bit)
4
QuiqCard – Quick Start
verza manual v1.0
5
Name and Function of Each Part
Front panel
1.
Toggle switch (1)
Set the functions.
iAMP
Function to listen to the music in iPod/iPhone.
USB DAC
Function to connect VERZA with computer or devices with
USB audio.
2.
To listen to the music after connected.
Toggle switch (2)
Set the modes.
VAMP
Listen to the music in iPod/iPhone with headphones (or
speakers) using the AMP (amplifier) of VERZA.
Ϟ +VAMP
In addition to the AMP (amplifier) function, iPod/iPhone gets
charged by the built-in battery of VERZA.
iSYNC
Perform ON and OFF of the connection between VERZA and
iPod/iPhone.
Perform the synchronization with iPod / iPhone and computer
and charge iPod/iPhone from computer, USB charger, etc.
3.
Power switch volume knob
Volume
Adjust the output volume to headphones (or speakers).
adjustment
Volume increases when turned clockwise. The volume
decreases when turned counterclockwise.
Power
The main power turns ON when the knob is turned clockwise
ON/OFF
and clicks.
The main power turns OFF when the knob is turned
counterclockwise all the way and clicks.
verza manual v1.0
6
4.
Headphone output / S/PDIF output
Headphone
Connect stereo headphones (or speakers).
output
Optical / S/PDIF Connect the round optical digital connector.
output
The digital signal from iPod/iPhone is DD (Digital-to-Digital)
converted and output as S/PDIF digital signal.
By connecting to a device with digital input, audio source of
iPod/iPhone gets output as high-quality sound at
48kHz/16bit.
* It outputs at the sampling frequency set on computer when
USB DAC is selected.
Rear panel
5.
GAIN toggle switch
Switches the headphone output gain between HIGH and LOW.
6.
USB standard A connector
Connects VERZA to iPod/iPhone.
7.
USB micro B connector
Connects VERZA to computer, compatible android device or USB charger.
verza manual v1.0
7
Side panel
8.
3D (3D surround) button (for iAMP mode only, refer to toggle switch (1))
Switches to the 3D mode when the button is pressed.
9.
BATTERY / BASS button
・Checks the remaining battery or charging status when the button is pressed lightly.
・Switches to the BASS BOOST mode when the button is pressed and held down, and the toggle switch
(2) is moved
back and forth (only for headphone output).
* Refer to "Setting Other Functions" (page 36) for the setting method of 3D and bass boost.
10. Charging status indicator
Displays the charging status of the battery.
* No display during iSYNC mode.
11. Remaining battery indicator
Displays the remaining battery in LED.
Checking the Remaining Battery of VERZA
The remaining battery can be checked by the LED indicators below battery mark.
The LED indicators light up in accordance with the remaining battery when the BATTERY / BASS button on the
side panel is pressed lightly.
Remaining battery LED
CAUTION
Full
○○
The battery at the time of purchase is
Low
○
not fully charged. Charge the battery
Empty
Off
before using VERZA.
○ LED color:
verza manual v1.0
Orange
8
Charging the Built-in Battery of VERZA
The built-in battery of VERZA can be charged by connecting the USB port A connector of a computer with the
USB micro B connector at the bottom of VERZA using the supplied USB to micro USB cable and by switching
the toggle switch (2) on the front panel to "AMP" or "Ϟ +VAMP" mode.
* When the built-in battery of VERZA has been fully charged, VERZA automatically starts charging
iPod/iPhone.
It takes approximately 5 hours to fully charge VERZA.
It is also possible to charge VERZA by using the Apple
USB charging adapter supplied with iPod/iPhone.
Display of charging status indicator
Pre charge (pre charging)
○●
Charge (quick charging)
○
Complete:(charging completed)
●
○:
Orange
●:
Green
* The CHARGE LEDs turn off when USB cable is disconnected.
CAUTION
・Do not keep charging for a long period of time. Always disconnect the USB cable
each time charging is completed.
・If both LEDs are off or become off when the USB cable is connected, immediately
disconnect the USB cable and stop charging.
・The battery has a life duration. The usable duration will become shorter due to
aging degradation.
verza manual v1.0
9
Disposing of the battery
VERZA is using a lithium ion polymer battery. It is required to dispose the battery separately from the general
household waste. Dispose the battery in accordance with the instructions (regulations) in your municipality.
Connecting VERZA with iPod/iPhone
Connect by inserting the Apple genuine dock connector USB cable supplied with iPod/iPhone securely
into the USB connector (A terminal) of VERZA.
CAUTION
If feeling discomfort when connecting the dock connector USB cable to
VERZA, do not connect forcibly, but check the connecting condition
between the USB connector of VERZA and the dock connector USB cable.
verza manual v1.0
10
Listening to Music in iPod/iPhone in VERZA “VAMP” Mode
1.
Turn on the power by the power switch volume knob and set the toggle switch (2) to "VAMP" position.
2.
Once VERZA and iPod/iPhone are correctly connected (authenticated), the toggle switch LED turns on
red or green.
* If the toggle switch is blinking, iPod/iPhone may not be connected with VERZA at all, or it may not be
correctly connected (authenticated).
In such case, disconnect iPod/iPhone once and reconnect, or turn OFF the power by turning the power
switch volume knob counterclockwise all the way until it clicks, and then turn the power ON again.
Refer
to “Setting Other Functions” for how to turn the power ON/OFF
* If the toggle switch LED does not turn on, the remaining battery of VERZA may be low.
In such case,
check the remaining battery and charge as necessary.
Charging iPod/iPhone by the Built-in Battery in VERZA "Ϟ +VAMP" Mode
Turn on the power by the power switch volume knob and set the toggle switch (2) to " Ϟ +VAMP" position.
Once connected (authentication is completed), iPod/iPhone starts to be charged by built-in battery of VERZA.
MEMO
CAUTION
The battery charging icon appears at the top
While charging iPod/iPhone from the built-in
right of iPod/ iPhone screen when
battery, VERZA becomes hot, but this is not a
iPod/iPhone is correctly being charged.
malfunction.
Also, touching VERZA for a long time may cause low
temperature burn, and therefore avoid charging in
your pocket or in similar situations.
verza manual v1.0
11
Connecting VERZA with Computer
To connect with computer, connect the supplied USB cable (micro B type) to the USB connector (USB micro B
connecter) of VERZA. USB port of VERZA is at the rear panel.
Synchronizing with iPod/iPhone and iTunes on Computer in VERZA "iSYNC" Mode
Perform the following procedures.
1
2
3
1
Turn the power switch volume knob clockwise until it clicks to turn the power ON.
2
Set the toggle switch (1) to iAMP position
3
Set the toggle switch (2) to iSYNC position
Synchronization with iTunes on computer and charging iPod/iPhone get performed. No authentication is
performed during iSYNC, and the LED on the toggle switch stays off.
CAUTION
Do not change the switches on VERZA or disconnect the USB micro cable
during synchronization.
verza manual v1.0
12
Listening to Music on Computer and devices with USB Audio in VERZA "USB DAC" Function
Perform the following procedures.
2
1
3
1
Turn the power switch volume knob clockwise until it clicks to turn the power ON.
2
Set the toggle switch (1) to USB DAC position.
3
Set the toggle switch (2) to iSYNC position.
4
Connect VERZA and computer with the supplied USB cable.
The device driver is automatically installed when VERZA is connected to computer for the first
5
Check the sound setting on computer and confirm a sound is coming. For volume control, adjust the
volume on computer.
* The built-in battery of VERZA will not be charged.
verza manual v1.0
13
Setting Other Functions

Setting Volume
Adjust the power switch volume knob.

Setting Bass Boost
Use Bass boost for enhancement in bass.
Perform the following procedures.
1
Press and hold the BATTERY / BASS button.
2
The LED on the toggle switch (2) in the front panel starts blinking.
3
Move the toggle switch (2) back and forth between AMP and
4
Ϟ +VAMP positions once.
The setting is completed when the LED on the toggle switch turns to either red or green and stays lit.
LED color
Sound
Red
PURE sound
Green
V-MODA Bass
* In factory setting red LED lights and blinks (bass boost off ).
* To cancel the setting, press the BATTERY / BASS button again (The LED becomes lighting from
blinking).
verza manual v1.0
14

Setting 3D (3D surround)
3D mode provides a spacious sound.
[ON] and [OFF] are switched back and forth by pressing the [3D] button.

Setting Gain
Gain of the headphones can be set by switching the GAIN toggle switch to either [HIGH] or [LOW].
It enables the headphones with different impedance to exert its full performance and to play in highquality sounds.
* Do not apply force to the GAIN toggle switch to avoid breaking the switch.

How to Reset (restoring factory settings)
In case the operation of VERZA freezes (operation stops), reset VERZA to the factory setting by turning the
volume knob all the way counterclockwise until it clicks, turning OFF the main power, and then turning it
back ON by turning the volume knob clockwise again.
verza manual v1.0
15
Specifications
verza manual v1.0
16
Thank you for purchasing this V-MODA product. Please read this instruction manual thoroughly before using.
Keep this manual available for your future reference.
Disclaimer
● V-MODA is not responsible for any damage caused by natural disasters, fire not caused by V-MODA,
actions or damages caused by third parties, criminal or accidental use by customers, or any other damages
caused by other irregular usage.
● V-MODA is not responsible for changes or loss to recorded data, loss of commercial profit, interruption of
business operations, or any resultant damages or loss caused by use or malfunction of VERZA.
● V-MODA is not responsible for damage caused by failure to follow instructions in this manual.
Trademarks and Registered Trademarks
iPod, iPhone, Made for iPod, Made for iPhone, iTunes, and Mac OS are registered trademarks or trademarks
of Apple Inc., registered in U.S.A., or other countries.
"Made for iPod" "Made for iPhone" is an indication that the product is an electronic accessory that is
designed to connect exclusively with an iPod/iPhone, and the developer has certified that the product has
fulfilled the performance standard specified by Apple Inc. Apple Inc. is not liable for performance, safety, and
compliance to the standard of this product.
Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in U.S.A. and
other countries.
The official name of Windows® is Microsoft® Windows® Operating System.
The offi cial name of Windows 7 is Microsoft® Windows® 7
Operating System.
The offi cial name of Windows Vista is Microsoft® Windows
Vista® Operating System.
The official name of Windows XP is Microsoft® Windows® XP Operating System
Product Support
V-MODA
www.v-moda.com
e-mail: support@v-moda.com
verza manual v1.0
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising