BT | DIVERSE 5350 | User guide | BT DIVERSE 5350 User guide

BT DIVERSE 5350 User guide
A
T
AN O YO TE
F
U XT O
D A
YO YO CAL M M R S
U E M
Q UR U LER ST SS S
M
U
AR TE U D SU AG
TE LE ST ISP BS ING
RL PH NO LA CR
Y ON T Y IB
FE E W SE E
R
E
I
IS NU TH VIC
PA MB HO E
YA ER LD
BL .
E.
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
User Guide
BT DIVERSE 5350
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
This product is intended for connection to analogue
public switched telephone networks and private
switchboards in the UK.
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Please open this page for an ‘At a glance’ guide
to your BT Diverse 5350.
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
At a glance
Display
Displays the status
of your handset.
Left hand side
Lets you set the
alarm clock.
Right hand side
Takes you into the
redial list.
Left hand side
Allows you to
make an internal call.
Right hand side
Takes you into the
menu options
1
INT
MENU
For making and
answering calls.
Calls list
Lets you access
your lists – calls, SMS,
answering machine and
voice mail.
Used to store numbers
and names in the
directory.
One button
As well as being the
number one button hold
down to access your
Voice Mail service.
Red phone
➤
Directory
1
Press to end a call, return
the display to idle or turn
the power on and off.
➤
2 abc
3 def
ghi
5
jkl
6 mno
7 pqrs
8
tuv
9wxyz
4
0 +
1
Use to answer
calls or make a call
in handsfree mode.
Keypad
Hold down to switch the
keypad guard on and off.
Switches the handset
ringer on and off.
Press for use with switchboards
and certain Network Services or
press and hold to enter a pause.
Handsfree
Hash/Keyguard
R
Star/bell
Recall
Green phone
Extra Directory
Microphone
Used to store an
additional 10 names and
numbers.
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Base
Speaker volume
To decrease the loudspeaker volume.
To increase the loudspeaker volume.
BT Diverse 5350
Play/Stop
To playback messages.
To stop playback.
Skip
–
Contact points
To play the next message.
To skip forward to the message after next.
+
Vol
Skip
Play/Stop
Skip
䊴䊴
䊳/䡲
䊳䊳
OGM
Ans on/off
Ans
On/Off
Del
To switch the answering machine on/off.
Illuminates when set to Answer On.
Flashes when you have new
messages stored.
Page
Registration/Page button
Skip
To repeat the current
message. To skip back to the
previous message.
Use to register handsets.
Used to page a handset.
Delete
To delete the
current message.
Base underside
Power socket
2
Telephone line cord socket
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
In this guide
Please refer to the separate Using
SMS User Guide for instructions on
using the SMS functionality.
At a glance
1
Main menu structure
4
Messages
6
Quick guide to handset settings
7
Quick guide to handset
display icons
8
Introduction
9
Unpacking your BT Diverse 5350
For your records
9
9
Safety information
10
Setting up
11
Using the telephone
15
Making and ending calls
Handsfree
Using the directory
Character map
VIP ringing
Voice activated directory dialling
Redial
Secrecy
Paging and internal calls
Listening in to an external call
15
16
17
18
19
22
27
28
28
30
Caller Display and other
BT Calling Features
31
Caller Display
Calls list
Call Waiting
Other BT Calling Features
31
31
34
34
Additional features
37
Voice Mail
Call Director
37
38
Handset settings
41
Base station settings
52
Base station PIN
52
Setting up and personalising
your answering machine
Outgoing messages
54
54
Answer delay
Setting the message length
Call screening
Quick access button setting
58
59
60
60
Using the BT Diverse 5350
answering machine via the
base unit
61
New message indicator
Playing messages
62
62
Using the BT Diverse 5350
answering machine via the
handset
63
New message indicator
Playing messages
64
64
Remote access
68
Using additional handsets
and bases
69
Registering additional handsets
69
Help
72
General information
74
Guarantee
Accessories and replacement items
Technical information
Switchboard compatibility
Setting pauses
Index
74
74
75
75
77
78
Hints and tips boxes
In this user guide, we’ve included
helpful tips and important notes.
They are shown in boxes like this.
BT Diverse Helpline – 08457 908 070
3
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Menu structure
SMS
Write message
Incoming
Outgoing
Settings
Service Centres
Service Centre 1 ->
Service Centre 5
SMS Mailboxes
SMS > 1-3
Notify Number
Notify Type
Select Services
Missed Calls
Withhold Number
For All Calls
Call Divert
All Calls
No Answer
When Busy
Call Waiting
On
Off
Cancel Ringback
Additional Features
Room Monitor
Call Internal
Call External
Level
Walk and Talk
Calender/Clock
Set Appointment
Enter Date
Enter Time
Enter Text
Alarm Clock
Enter Alarm Time
Date/Time
Time Mode
12 Hour
24 Hour
Audio Settings
Earpiece Volume
Handsfree Volume
Ringer Volume
Ringer Melody
External Calls
Internal Calls
Appointment
Alarm Clock
All Ringer Tones
Advisory Tones
Key Tones
Battery Low
Off
On
During Call
Confirmation Tone
BT Diverse Helpline – 08457 908 070
4
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Handset Settings
Auto Answer
Language
Register Handset
Select base
Reset Handset
Base Settings
Audio Settings
Loudspeaker Volume
Ringer Volume
Ringer Melody
Key Tones
System-PIN
Base Reset
Additional Features
Dialling mode
Tone
Pulse
Tone-Earth
Recall
80 ms
to
800 ms
Repeater Mode
Name Announcement
Listening in
Call Director
System – PIN
Call Director Activation
Record Announcement
Play Announcement
Delete Announcement
Continued on the next page…
BT Diverse Helpline – 08457 908 070
5
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Voice Mail
Set Key 1
Answer Machine
On (✔)
Off
Call Screening
Handset
Base
Record Memo
Announcements
Record Announcement
Play Announcement
Delete Announcement
Record Announce Only
Play Announce Only
Delete Announce Only
Set Answer Mode
Answer and Record
Announce Only
Records
Message Length
30 Seconds
60 Seconds
120 Seconds
Maximum
Record Quality
High Quality
Long Play
Ring Delay
Immediately
10 sec
20 sec
30 sec
Auto
Voice Prompts
Record Word
Voice Control
User List Complete
Messages
Press
to get to your Mailbox and access your text messages, voicemail,
answering machine and Calls list.
The following functions are available:
SMS
Answering Mach.
Continue
Volume
Copy to Directory
Delete all
Calls List
Delete entry
Copy to directory
Date and time
Status
Delete list
BT Diverse Helpline – 08457 908 070
6
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Quick guide to
handset settings
Page
no
Switch the handset
OFF/ON:
(default is ON)
Hold down.
15
Switch keyguard
on/off
Hold down.
47
Switch handset
ringer off
Hold down.
41
or
Redial a number
Copy a displayed
number in the redial
list to the directory
➤
Make a call
.
➤
to scroll through the list
Menu
15
to dial.
27
to display Copy to directory OK
Menu display shows Save entry OK
OK add name
.
Dial from the
directory
to name or number you want to dial
Dial from Calls list
to display Calls List OK
.
to display the number you want
27
19
. 32
Adjust handsfree
volume whilst in
handsfree mode
Menu Display shows Volume OK
to decrease/increase volume OK .
16
Adjust earpiece
volume
Menu display shows Volume OK
to decrease/increase volume OK .
41
Make internal call
Int then
Call all handsets
Int
Transfer call to
another handset
Int then
Put caller on hold
while you make
an internal call
Set date and time
select handset and click on
to Call All
.
select handset and click on
Int then
select handset and click on
Back will be selected press OK .
Menu
.
28
28
. When user answers press
. When finished press Menu .
to display Calender/Clock OK to display Date/Time OK
enter date OK enter time OK . Select am/pm OK .
. 28
29
14
BT Diverse Helpline – 08457 908 070
7
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Quick guide to handset
display icons
Redial, lists up to the last 10 dialled number.
Flashes to indicate new messages (e.g. Calls or SMS).
Remains constant when you have old messages stored.
INT
MENU
For calling other handsets.
Opens the menu.
Shows the status of the handset battery.
Scroll through the menu.
OK
Confirms the function displayed.
Scroll left and right when entering numbers or messages.
C
Deletes numbers/characters (from right to left).
Ringer off.
Keypad locked.
eg.
1
Shows the number of the handset and is displayed in top left hand corner.
Answering machine set to ON.
Crescendo tone.
Appears when the time and date is set, allows access to Calendar/Clock
functionality.
BT Diverse Helpline – 08457 908 070
8
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Introduction
Unpacking your
BT Diverse 5350
For your records
Date of purchase:
If anything is missing, please contact
your place of purchase immediately.
Place of purchase:
BT Diverse 5350
One BT Diverse 5350
base station
–
Skip
+
Vol
Play/Stop
Skip
/
OGM
Del
Ans
On/Off
Page
One BT Diverse 5300
handset
For guarantee purposes proof of
purchase is required so please keep
your receipt.
1
MENU
Enter your system PIN code here:
➤
➤
3 def
2 abc
1
6
4
ghi
5
INTRODUCTION
INT
mno
jkl
9wxyz
8 tuv
7 pqrs
0 +
R
One power supply
for the base station
For more information on your system
PIN, see page 52.
One telephone
line cord
Two AAA rechargeable
batteries
One belt clip
Battery compartment
cover
BT Diverse Helpline – 08457 908 070
9
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Safety information
Safety information
General
Only use the power supply included
with the product. Using an
unauthorised power supply will
invalidate your guarantee and may
damage the telephone. Power supply
number is M- GA35 - 095130F.
SAFETY INFORMATION
For the handset use only AAA 1.2V
Nickel Metal Hydride (NiMH)
rechargeable batteries with a minimum
capacity of 700 mAh. Never use other
batteries or conventional alkaline
batteries. They could lead to a short
circuit or destroy the battery casing.
Batteries and accessories are available
from www.withandwithoutwires.com
or call 0870 240 5522.
If the Keyguard is switched on, it is
NOT possible to make calls, including
emergency numbers (999/112).
Cleaning
Simply clean the handset and base
station with a damp (not wet) cloth, or
an anti-static wipe. Never use household
polish as this will damage the product.
Never use a dry cloth as this may cause
a static shock.
Environmental
Do not expose to direct sunlight.
The product may heat up when the
batteries are being recharged. This is
normal. However, we recommend that
you do not place the product on
antique/veneered wood to avoid damage.
Do not stand your product on carpets or
other surfaces which generate fibres, or
place it in locations preventing the free
flow of air over its surfaces.
Do not open the base station or handset
(other than to change batteries). This
could expose you to high voltages or
other risks.
Do not submerge any part of your
product in water and do not use it in
damp or humid conditions, such as
bathrooms.
Radio signals transmitted between the
handset and base may cause interference
to hearing aids.
Do not expose your product to fire,
explosive or other hazardous conditions.
This product should not be used near
emergency/intensive care medical
equipment and should not be used by
people with pacemakers.
There is a slight chance that your phone
could be damaged by an electrical storm.
We recommend that you unplug the
power and telephone line cord during an
electrical storm.
Never dispose of batteries in a fire. There
is a serious risk of explosion and/or the
release of highly toxic chemicals.
BT Diverse Helpline – 08457 908 070
10
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Setting up
Plan the location
2 Plug the power supply
unit into the wall socket
Situate your product close enough to
the telephone and mains power sockets
so that the cables will reach.
Make sure it is at least 1 metre away
from other electrical products to avoid
interference.
Do not situate the product in the
bathroom or other humid areas.
Plug the power supply cable into the
power socket on the underside of your
base.
SETTING UP
1 Connect the base station
WARNING
Do not connect the telephone line cord
to the phone socket until your handset
is fully charged. This will prevent the
risk of the phone being answered before
the battery is charged. Answering the
phone before the battery is fully
charged may prevent it from reaching
its optimum capacity.
BT Diverse Helpline – 08457 908 070
11
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
3 Registering and charging
the handset
The display is protected by a plastic
film. Remove the protective plastic film
from the display.
INT
MENU
Insert the batteries
SETTING UP
Insert the two batteries supplied, as
indicated inside the battery
compartment and slide the battery
compartment cover shut.
WARNING
Under no circumstances should
non-rechargeable batteries be used.
Only use AAA 1.2V Nickel Metal
Hydride (NiMH) rechargeable
batteries with a minimum capacity of
700 mAh.Using inappropriate batteries
will invalidate your guarantee and
may damage the telephone. Batteries
and accessories are available from
www.withandwithoutwires.com
or call 0870 240 5522.
To register your handset, place it in the
base station with the display facing
upward. After approx. one minute, the
handset’s internal number is displayed
(e.g.: 1). Successful registration is
signalled by a confirmation tone.
When the handset is registered the
display will show:
1
INT
The battery cover may be found in the
packaging with the batteries.
BT Diverse Helpline – 08457 908 070
12
MENU
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
If the icons on the display
flash continuously...
It means that the handset is not
registered with the base station.
Ensure you have correctly carried out
step 3 above. If the product has still
not registered, please see “Registering
manually” on page 70.
All additional handsets you purchase
will need to be individually registered
with the base station before they will
work with the BT Diverse 5350.
Battery level icons
When the batteries are almost flat a
beep sounds and the display shows the
empty battery icon. You will need to
recharge your handset before you can
use it. The various states of charge
are shown below:
Batteries fully charged
Batteries at 66%
Batteries at 33%
Batteries empty
If you go out of range of a base station
for a long time while your handset is
switched ON, it may take more than
20 minutes to ‘find’ the base station
again when you come back within
range. However, by simply switching
the handset OFF for a moment, then
ON again, it will find the base station
within a few seconds.
Battery performance
Batteries and case may become warm
during charging. This is normal.
Under ideal conditions, the handset
batteries should give about 13 hours
talktime or 170 hours standby time
on a single charge. However, new
NiMH batteries do not reach their full
capacity until they have been in
normal use for several days.
SETTING UP
Leave the handset for approx. 16 hours
in the base station to charge the
batteries, as they are not charged in the
factory. The battery status icon flashes
on the handset to indicate that the
batteries are being charged.
Out of range?
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, so reducing the talk/standby
time of the handset. Eventually they
will need to be replaced. New batteries
are available from
www.withandwithoutwires.com
or call 0870 240 5522.
If you replace the handset batteries
with ones that have been fully charged,
the battery indicator will not show full
until the next charge cycle has been
completed. Charge the handset until
the batteries register full again. From
then on the display will be correct.
BT Diverse Helpline – 08457 908 070
13
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
4 Connect the telephone
line cord to the base and
plug into the wall socket
Setting the date and time
MENU
Press the Menu options button.
Press the DOWN navigation
button until the display shows
Calender/Clock.
Ensure that each end of the line cord is
fitted into the correct socket.
OK
Press the OK options button.
Set Appointment appears.
Press the DOWN navigation
button until the display shows
Date/Time.
OK
Fit the belt clip onto the back of the
handset.
SETTING UP
Enter the day/month/year, e.g.
05 10 03 for 5th October 2003.
OK
Slot
Press the OK options button.
Press the OK options button.
Enter the time – hours/minutes.
e.g. 0925 for 9:25am.
OK
Press the OK options button.
Use the UP/DOWN navigation
buttons to select am/pm if in 12
hour mode.
Your BT Diverse 5350 is now
ready for use.
Note
If you subscribe to a Caller Display
service the time and date will be set
with the first incoming call.
However, the year setting will have to
be changed manually. See opposite.
OK
Press the OK options button.
Press the DOWN navigation
button to Time Mode.
OK
Press the OK options button.
Use the UP/DOWN navigation
buttons to select 12 or 24 hour
display (12hr is the default).
OK
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
14
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Using the telephone
Note
To exit a menu at any time, press the
RED PHONE button. This will take
you back one step. Keep pressing the
RED PHONE button to return to the
idle screen.
To switch the handset power
on and off
Press and hold the RED
PHONE button to switch the
handset on again.
Making and ending calls
Enter the phone number first.
C
If you make a mistake press
the C options button to
remove any incorrect digits.
Press the GREEN PHONE
button to dial the number.
To end a call
USING
Press and hold the RED
PHONE button to switch the
handset off.
Preparatory dialling
Press the RED PHONE button.
Call timer
Your handset automatically times the
duration of all external calls, showing it
on the display during your call and for
a few seconds after it is finished.
To make an external call
Ensure the handset is
switched ON.
Press the GREEN PHONE
button. You will hear the dial
tone.
Dial the number.
BT Diverse Helpline – 08457 908 070
15
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To switch back to using the
handset at any time, press the
GREEN PHONE button.
To receive an external call
Press the GREEN PHONE
button to answer the call.
Or
If the handset is on the base,
simply lift it up and speak.
You do not need to press the
GREEN PHONE button.
This is called Autotalk. You
can switch autotalk off so you
always have to press the
GREEN PHONE button to
answer a call, see page 46.
To adjust the handsfree
volume whilst in handsfree
mode
Whilst in handsfree mode and
you want to increase or
decrease the handsfree volume.
MENU
OK
USING
Handsfree
Handsfree allows you to talk to your
caller without holding the handset and
enables other people in the room to
listen to the conversation. Your hands
are left free, for example to take notes.
Press the MENU options
button.
Press the OK options button to
select volume.
Using the LEFT or RIGHT
navigation buttons you can
either increase or decrease the
volume.
OK
Press the OK options button
if you want to save the new
volume setting.
Note
You can test the handsfree function by
dialling the BT speaking clock on 123.
To answer a call in handsfree
When the phone rings:
To make a handsfree call
➤
Dial the number
➤
➤
Press the HANDSFREE button.
The call is transferred to the
loudspeaker.
Press the HANDSFREE button.
The loudspeaker is switched
on and you hear the number
being dialled.
➤
BT Diverse Helpline – 08457 908 070
16
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To switch to handsfree during
a call
During a call you can switch to
handsfree mode:
➤
Press the HANDSFREE button.
The call is transferred to the
loudspeaker.
➤
Press the GREEN PHONE
button to switch back to using
the handset.
To store an entry in the
directory
Press the DIRECTORY button.
MENU
OK
Press the MENU options button.
Display shows New Entry.
Press the OK options button.
Enter the telephone number.
OK
Press the OK options button to
enter the name.
Enter the name.
Entering names:
Enter the name using the letters
on the keypad. For example, to
enter the name TOM:
Note
8
tuv
6 mno
Press the 6 button three times
until the display shows O.
6 mno
Then press the 6 button to
display m.
Using the directory
There are three directory options
available. Up to 100 name and number
directory, an extra directory where an
additional 10 names and numbers can
be stored and a voice activated
directory. Instructions for the standard
directory are described here, but
please see page 72 for instructions on
using the extra directory and voice
activated directory.
You can store up to 100 names and
numbers in the standard telephone
directory. You can enter up to 32 digits
and up to 16 characters.
Press the 8 button, T appears
on the display.
USING
If you need to replace the handset in
the base station during a call, for
example, because the battery is flat,
hold down the HANDSFREE button.
For the full character map,
see page 18.
MENU
Press the MENU options
button. Display shows Save
Entry.
OK
Press the OK options button
to confirm.
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
17
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Note
The first letter of each name, and the
first letter after a punctuation mark
are automatically shown as capitals.
Letters are always added to the left of
the cursor.
Press to switch between capitals
and lower case.
Press to move the cursor.
C
1
Press to delete from right to left.
Press 1 to enter a blank space.
Character map
These are the characters you can use when storing a directory entry.
USING
1st
2nd
3rd
4th
5th
6th
7th
8th
9th 10th 11th 12th 13th 14th
press press press press press press press press press press press press press press
1
1
€
£
$
¥
2 abc
a
b
c
2
ä
á
à
â
3 def
d
e
f
3
ë
é
è
ê
4
ghi
g
h
i
4
ï
í
ì
î
5
jkl
j
k
l
5
6 mno
m
n
o
6
ö
ñ
ó
ò
7 pqrs
p
q
r
s
7
ß
8
t
u
v
8
ü
ú
ù
û
w
x
y
z
9
ÿ
y´
a➔A
✱
/
(
)
<
.
,
?
!
0
+
#
@
\
&
§
tuv
9wxyz
0 +
ã
ç
ô
õ
æ
ø
å
=
>
%
-
:
¿
¡
“
BT Diverse Helpline – 08457 908 070
18
‘
;
–
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
VIP ringing
To dial a number in the
directory
You can mark directory entries of
callers who are important to you as VIP
callers. You can also allocate a
particular melody to VIP callers so you
can tell who is calling from the melody.
The VIP melody will sound after the
first ring tone.
Press the DIRECTORY button.
Press the DOWN navigation
button to scroll through the
names which are listed in
alphabetical order.
Or
To mark a directory entry as
a VIP caller
Press the DIRECTORY button.
Use the DOWN navigation
button to scroll to the entry
you want.
Press the MENU button.
Press the DOWN navigation
button until the display shows
VIP Entry.
OK
Press the OK options button.
You will hear the current
melody. Use the DOWN
navigation button to select a
melody (1-10). You will hear
each melody as you scroll
through.
OK
Press the OK options button.
Press the GREEN PHONE
button. The number is dialled.
USING
MENU
3 def
Enter the first letter of the
name you want, e.g. for Emma,
press 3 twice to search for
names beginning with E.
To view directory entry
Press the DIRECTORY button.
Press the DOWN navigation
button to scroll through the
entries.
Or
Press the first letter of the
name you are looking for.
Press the RED PHONE button
until you reach the idle display.
Press the RED PHONE button
to return to the idle screen.
The entry is now stored in the
directory with VIP next to it.
BT Diverse Helpline – 08457 908 070
19
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To edit a directory entry
To copy an entry to another
Diverse 5000 handset
Press the DIRECTORY button.
You can copy individual
directory entries from the
directory or extra directory
to another Diverse 5000
handset that is registered to
the same base.
Use the keypad to enter the
first letter of the name you
wish to edit.
Then press the DOWN
navigation button to scroll to
the exact entry.
MENU
Press the DIRECTORY or
EXTRA DIRECTORY button to
open the directory.
Press the MENU options button.
Press the DOWN navigation
button until Edit Entry is
displayed.
USING
OK
C
OK
C
MENU
OK
Press the OK button.
Press the DOWN navigation
button to scroll to the entry
you want to copy.
MENU
Edit the number, if necessary,
using the LEFT/RIGHT and
DELETE buttons.
Press the OK button.
Press the DOWN navigation
button until the display shows
Send Entry.
OK
The name will be displayed.
Edit the name if necessary by
using the LEFT/RIGHT and
DELETE buttons as above.
If the name is correct, press
the MENU button, Save Entry
is displayed.
Press the MENU button.
Press the OK options button.
Use the DOWN navigation
button to select the handset
you wish to copy the entry to.
OK
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
Press the OK button. The
display will show Entry Saved.
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
20
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To copy the entire directory
to another Diverse 5000
handset
You can copy the entire
directory or extra directory to
another Diverse 5000 handset
that is registered to the same
base.
Press the DIRECTORY or
EXTRA DIRECTORY button to
open the directory.
To delete an entry
Press the DIRECTORY button
and open the directory.
Press the DOWN navigation
button to scroll to the entry
you want to delete.
MENU
Press the DOWN navigation
button until the display shows
Delete Entry.
OK
Press the DOWN navigation
button to scroll to the entry
you want to copy.
MENU
OK
To delete the entire directory
Press the OK options button.
Use the DOWN navigation
button to select the handset
you wish to copy the entire
directory to.
Press the DIRECTORY button
and open the directory.
MENU
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Delete List.
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
USING
OK
Press the OK options button
to confirm. You hear a
confirmation beep.
Press the RED PHONE button
until you reach the idle display.
Press the MENU button.
Press the DOWN navigation
button until the display shows
Send List.
Press the MENU options button.
OK
Press the OK options button.
Delete List? is displayed.
OK
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
21
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
editing voice patterns. (You can enter a
user name instead of using user 1-4,
please see page 26).
Extra directory
Your BT Diverse 5350 has an
additional 10 name and number
directory. It is recommended
that this is used for special
numbers i.e. doctor, dentist,
takeaway numbers.
Press the EXTRA DIRECTORY
button.
The structure of this directory
is the same as the main
directory. You can follow the
instructions starting on page 16
for storing, dialling, viewing,
editing and deleting these
names and numbers.
A maximum of 20 voice patterns can be
stored for directory entries. This could
be for example 20 directory entries
each with one voice pattern saved or
a maximum of 5 directory entries with a
voice pattern saved by 4 different users.
To record a voice pattern for
a new entry
Press the DIRECTORY button
twice.
Display shows
USING
Voice Directory:
Select User
Voice activated directory
dialling
You can enter the voice activated
directory by pressing the DIRECTORY
button twice.
With voice activated dialling you can
dial numbers that you save by speaking
the name of the person you wish to call.
To do this you must save an entry and
then record your voice pattern, which
will then be stored in the handset.
Up to four users can store their voice
patterns. You will need to allocate a
user number (User 1-4) for each person
using the handset which they will need
to enter when recording, deleting or
OK
Press the OK options button.
Use the UP/DOWN button
to select the User number
(User 1-4).
OK
MENU
Press the OK options button.
Press the MENU button.
Press the DOWN button until
the display shows New Entry.
OK
Press the OK options button.
Enter the telephone number
using the keypad.
OK
Press the OK options button.
Enter the name using the
keypad.
BT Diverse Helpline – 08457 908 070
22
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
OK
Press the OK options button.
Display shows Entry Saved.
MENU
To record a voice pattern for
an existing entry
Press the MENU options
button.
Press the DIRECTORY button
twice.
Display shows Record Word.
OK
Display shows Start recording
(with the name underneath).
OK
Display shows
Press the OK options button.
Voice Directory:
Select User
OK
Press the OK options button and
hold the handset to your ear.
Press and hold the RED
PHONE button to return to the
idle screen.
Note
If your two recordings sound too
different then you will be prompted to
record them again. Also if your speech
pattern is too similar to another users
a message will tell you. Press the RED
PHONE button to return to the start
and repeat the recording procedure.
Use the UP/DOWN button
to select the User number
(User 1-4).
OK
Press the OK options button.
Use the DOWN button to
scroll to the entry you want.
MENU
Press the MENU options
button.
USING
You will hear a short tone.
Speak the name. You will hear,
‘Please repeat again’, and a
short tone. Speak the name
again. Your recording is stored
and your entry will be marked
with a
.
Press the OK options button.
Display shows Record Word.
OK
Press the OK options button.
Display shows Start recording
(with the name underneath).
OK
Press the OK options button and
hold the handset to your ear.
You will hear a short tone.
Speak the name. You will hear,
‘Please repeat again’, and a
short tone. Speak the name
again. Your recording is stored
and your entry will be marked
with a
.
Press and hold the RED PHONE
button to return to the idle
screen.
BT Diverse Helpline – 08457 908 070
23
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To dial a number using voice
activated dialling
OK
Press the OK options button.
The loudspeaker will play the
name.
Press and hold the GREEN
PHONE button.
Press and hold the RED
PHONE button to return to the
idle screen.
Display will show
Please speak now!
After the tone, speak the name
of the entry you wish to dial.
To delete a voice pattern
If the name matched the voice
pattern the number will be
dialled.
Press the DIRECTORY button
twice.
Display shows
Voice Directory:
Select User
To play a user’s voice pattern
OK
USING
Press the DIRECTORY button
twice.
Use the UP/DOWN button
to select the User number
(User 1-4).
Display shows
Voice Directory:
Select User
OK
OK
MENU
OK
Press the OK options button.
Use the DOWN button to
scroll to the entry you want
to delete.
Press the OK options button.
Use the UP/DOWN button
to select the User number
(User 1-4).
Press the OK options button.
MENU
Press the MENU options
button.
Press the OK options button.
Display shows Record Word.
Use the DOWN button to
scroll to the entry you want.
Use the DOWN button to
scroll to Delete Word.
Press the MENU options
button.
Display shows Record Word.
OK
Press the OK options button.
Display shows Record deleted!
and you will hear a tone.
Use the DOWN button to
scroll to Play Recording.
BT Diverse Helpline – 08457 908 070
24
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
The voice pattern is deleted
but the name and number will
remain stored. The
will
disappear after the entry. The
voice patterns of other users
for the same entry are
unaffected.
OK
C
OK
Press the OK options button.
Edit the name using the
LEFT/RIGHT and DELETE
buttons and re-enter the
correct characters.
Press the OK options button.
Display shows Entry saved.
To view or edit a voice
activated entry
Press and hold the RED
PHONE button to return to the
idle screen.
Press the DIRECTORY button
twice.
Display shows
Voice Directory:
To delete a voice
activated entry
Select User
OK
Press the DIRECTORY button
twice.
Press the OK options button.
OK
Press the OK options button.
Display shows
Voice Directory:
Select User
OK
Use the DOWN button to
select the entry you want
to view.
To edit the entry:
MENU
OK
C
OK
Press the OK options button.
Use the DOWN button to
select the entry you want to
delete.
MENU
Press the OK options button.
Edit the number using the
LEFT/RIGHT and DELETE
buttons and re-enter the
correct digits.
Press the OK options button.
Use the UP/DOWN button
to select the User number
(User 1-4).
Press the MENU options
button.
Use the DOWN button to
scroll to Edit Entry.
USING
Use the UP/DOWN button
to select the User number
(User 1-4).
Press the MENU options
button.
Use the DOWN button to
scroll to Delete Entry.
OK
Press the OK options button.
BT Diverse Helpline – 08457 908 070
25
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Display shows Entry has
been deleted! and you will
hear a tone.
Press and hold the RED
PHONE button to return to the
idle screen.
To delete the entire voice
activated list
Press the DIRECTORY button
twice.
To enter a user name for a
voice user
MENU
Press the DOWN button until
the display shows Voice Mail.
OK
OK
OK
USING
Use the UP/DOWN button
to select the User number
(User 1-4).
OK
OK
OK
MENU
Press the OK options button.
Change User Name.
OK
Press the OK options button.
C
Use the C button to delete
unwanted characters and then
use the keypad to enter the
name you want.
OK
Press the OK options button to
confirm.
Display shows List deleted
and you will hear a tone.
Press and hold the RED
PHONE button to return to the
idle screen.
Press the MENU button.
Display shows
Press the OK options button.
Display shows Delete List?
Press the OK options button.
Use the UP/DOWN button to
select the user number you
want to enter a name for
(User 1-4).
Press the OK options button.
Use the DOWN button to
scroll to Delete List.
Press the OK options button.
Press the DOWN button until
the display shows User List
Complete.
Voice Directory:
Select User
Press the OK options button.
Press the OK options button.
Press the DOWN button
until the display shows Voice
Prompts.
Display shows
OK
Press the MENU options
button.
Press and hold the RED
PHONE button to return to the
idle screen.
BT Diverse Helpline – 08457 908 070
26
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
OK
Redial
Your handset automatically saves the
last 10 telephone numbers dialled into a
redial list.
To dial a number in the
redial list
Enter the name (for details,
see page 17).
MENU
OK
Press the GREEN PHONE
button to dial the number.
Note
To cancel any procedure, press the
RED PHONE button until the display
returns to idle.
To delete a number from the
redial list
Press the REDIAL options
button.
Press the REDIAL options
button.
Press the DOWN navigation
button to scroll to the number
you want to copy.
MENU
OK
Press the DOWN navigation
button to select the number
for deletion.
MENU
Press the MENU options
button.
Press the DOWN navigation
button until the display shows
Copy to Directory.
Press the OK options button.
Press the OK options button
to confirm.
USING
To copy numbers shown in
the redial list to the directory
Press the MENU options button.
The display shows Save Entry.
Press the RED PHONE button
until you reach the idle display.
Press the REDIAL options
button. The last number
dialled will be displayed.
Press the DOWN navigation
button to scroll through the
redial list.
Press the OK options button
again.
Press the MENU options
button.
Press the DOWN navigation
button until the display shows
Delete Entry.
OK
Press OK to confirm deletion.
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
27
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Or
Secrecy
Press the handset number you
want to call on the keypad.
When on a call you can talk to someone
in the same room, without your caller
hearing.
Or
Call All
To switch secrecy on/off
During a call:
INT
Press the INT options button.
The microphone is switched
off. The caller hears musical
tones.
The line will be seized by the
first handset user to answer
the call.
Press the RED PHONE button
to return to the caller.
USING
Paging and internal calls
Select the Call All option
to page all the handsets
registered to the base and
press the GREEN PHONE
button.
Note
You can also page all handsets by
pressing the PAGE button on the base
station.
You can alert handset users that they
are wanted, or locate a missing handset.
If you have multiple handsets
registered to the base you can make
internal calls between handsets.
INT
To transfer an external call
between handsets
You can forward an external
call to another handset
registered to the base.
Press the INT options button.
A list of all the handsets that
are registered to the base are
listed, you can select any of
them.
During an external call:
Your handset is identified by
INT 1
<.
Press the INT options button
to display the list of handsets.
Your caller hears musical
tones.
Press the DOWN navigation
button to highlight the handset
you want to call and press the
GREEN PHONE button.
Press the UP or DOWN
navigation button to select the
handset you want to call or
Call all handsets.
INT
BT Diverse Helpline – 08457 908 070
28
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Press the GREEN PHONE
options button to call. When the
other handset answers you can
tell them you are transferring
the call.
Press the RED PHONE button
to put the call through.
You can now speak with the
other handset user.
To return to your
external caller:
MENU
Press the MENU button and
Back will be displayed.
OK
Select the OK options button
which will reconnect you to
the external call.
Note
You can also put the call through
without announcing it by immediately
pressing the RED PHONE button after
dialling the other handset.
To answer a waiting call
during an internal call
This enables you to ask another
handset user a question and
then get straight back to your
caller.
MENU
OK
During a call:
INT
Or
Press the MENU button.
To accept Call Waiting, press
the OK options button.
Or
Press the INT options button
to display the list of handsets.
Your caller hears musical
tones.
Press the UP or DOWN
navigation button to select the
handset you want to call.
USING
If you are making an internal
call and hear the Call Waiting
tone you can immediately take
the incoming call.
To put an external call on hold
while you make an internal call
To reject Call Waiting, press
the DOWN navigation button.
The display shows reject
Call Waiting.
OK
Press the OK options button.
Note
Press the handset number you
want to call on the keypad.
Press the GREEN PHONE
button to call.
If you accept Call Waiting you will
automatically terminate your internal
call.
BT Diverse Helpline – 08457 908 070
29
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Listening in to an
external call
While on an external call another
handset user can listen in to the
conversation and also choose to join
the conversation. A tone will sound to
indicate when another user joins the
conversation. To use this feature you
will need to switch it on, the default
setting is off.
To switch listening in on
and off
MENU
Press the MENU options
button.
USING
Press the DOWN button
until the display shows Base
Settings.
OK
Press the OK options button.
Press the DOWN button until
the display shows Additional
Features.
OK
Press the OK options button.
Display shows System PIN:
Enter the system PIN
(original setting = 0000).
OK
Press the OK options button
to switch on or off. The tick
indicates that listening in is
switched on.
Press and hold the RED
PHONE button to return to the
idle screen.
To listen in on an
external call
When the telephone is being
used by another handset user
on an external call, the display
will show Line in use. If you
wish to listen in on the call:
Press the GREEN PHONE
button.
You can now listen in on the
call. A tone will sound so the
other parties know that you
are listening in.
To stop listening in, press the
RED PHONE button.
Press the OK options button.
Press the DOWN button until
the display shows Listening in.
OK
OK
Note
If the first handset user presses the
RED PHONE button during the call
they will leave the conversation,
however, the handset that is listening
in will still be connected to the
external caller.
Press the OK options button.
Display shows Listening in.
BT Diverse Helpline – 08457 908 070
30
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Caller Display and other
BT Calling Features
IMPORTANT
Note
To use Caller Display and Call Waiting
you must first subscribe to the Services
from your Network Provider. For more
information on BT’s Calling Features
call BT free on 0800 800 150.
Calls that are ‘withheld’, ‘unavailable’
or ‘international’ are not stored in the
Calls list, as there is no telephone
number sent via the Network.
If you have stored a name to go with
the number in your handset directory,
the name will be displayed as well.
Please ensure that you have stored the
full telephone number, including the area
code, otherwise the name will not match
the number stored in the directory.
If the caller has withheld their number,
the display will show WITHHELD.
If you call from another internal
handset, the display shows the handset
number and INT.
Calls list
The Calls list contains the telephone
numbers of your last 10 callers.
BT CALLING FEATURES
If you subscribe to a Caller Display
Service you can see who is calling you
on your handset display, as well as the
date and time of their call (unless the
number has been withheld).
Whether you take a call or not, the
caller’s details are stored in the Calls
list. You can display, scroll through and
dial numbers in the list and copy them
into the directory.
If a call is received when the Calls list
is full then the oldest entry will be
deleted automatically.
The
button lets you open:
• Text messages (SMS).
• Answering machine messages.
• Calls list.
Note
If you have a new call in your Calls
list, the
icon will flash on the
handset display.
BT Diverse Helpline – 08457 908 070
31
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To call the number:
To view the Calls list
Press the GREEN PHONE
button. The number displayed
is dialled.
When you have new calls, the
icon flashes in the display.
Press the ENVELOPE button.
Press the DOWN navigation
button until the display shows,
e.g. Calls List: 03+07.
To display the date and time
the call was received:
MENU
In this example, you have
received 3 new calls and you
have 7 old calls (calls you have
already viewed).
Press the DOWN navigation
button until the display shows
Date and Time.
OK
BT CALLING FEATURES
OK
Press the OK options button to
display the most recent number
that called you.
Press the UP or DOWN
navigation button to display
all your new calls, followed by
all your old calls.
Press the OK options button.
The date and time of the call
are displayed.
OK
Press the OK options button to
return to the Calls list.
To display the status of the call:
MENU
Note
Press the MENU options
button.
Press the DOWN navigation
button until the display shows
Status.
To exit the Calls list at any time,
press the RED PHONE button until
you reach the idle display.
OK
WHEN A CALLS LIST ENTRY
IS DISPLAYED YOU HAVE THE
FOLLOWING OPTIONS:
Press the OK options button.
The display shows whether the
call is a New Call or an Old
Call and the number of the
call in the Calls list, e.g. 01/10 –
the first call in a list of ten.
OK
32
Press the MENU options
button.
Press the OK options button to
return to the Calls list.
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To copy a number from the
Calls list to the directory:
MENU
OK
MENU
Press the MENU options
button.
Press the DOWN navigation
button until the display shows
Copy to Directory.
OK
To delete the whole Calls list:
Press the DOWN navigation
button until the display shows
Delete List.
OK
Press the OK options button.
The display shows Calls list
empty!
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
Enter the name of the person
using the keypad.
Press the OK options button.
Entry Saved is displayed.
The display automatically
returns to show the Calls list.
To delete a call from the
Calls list:
MENU
Press the MENU options
button.
The display shows
Delete Entry.
OK
Press the OK options button.
Voice announced Caller
Display
When you receive an external call you
will hear the ringer and the caller’s
name will be announced if you have
subscribed to your network provider’s
Caller Display service and you have
recorded a voice pattern for the
incoming number. Please see page 31
for more information about Caller Display.
To switch the voice
announcement on and off
MENU
Press the MENU options
button.
The display shows Entry has
Display shows SMS.
The display then shows the
next Calls list entry.
Press the DOWN button
until the display shows Base
Settings.
been deleted!
BT CALLING FEATURES
Press the MENU options
button.
The display shows Save Entry.
OK
Press the OK options button.
The number is displayed.
The display shows
<Enter Name>.
MENU
Press the MENU options
button.
BT Diverse Helpline – 08457 908 070
33
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
OK
Press the OK options button.
Press the DOWN button until
the display shows Additional
Features.
OK
Press the OK options button.
an intermittent beep through the
handset. This is to alert you to the
other caller waiting to speak to you.
To accept a waiting call
Press the DOWN button
until the display shows Name
Announcement.
OK
Press the OK options button.
OK
Press the OK options button
to switch on or off. The
indicates when it is switched on.
BT CALLING FEATURES
Press and hold the RED
PHONE button to return to the
idle screen.
SMS (text messaging)
For instructions on using the SMS
functionality, please refer to the separate
‘Using SMS user guide’.
Answering machine
For instructions on listening to your
answering machine messages, see pages
62 and 64.
Call Waiting
If you also subscribe to a Call Waiting
Service, when you are on a call and
another person tries to call you, the
second caller’s number will appear on
the handset display and you will hear
During a call when you hear
the Call Waiting beeps:
The number (and name if
stored in the directory) of the
second caller will appear on
the display.
MENU
Press the MENU options
button.
Display shows Accept Call
Waiting.
OK
Press the OK options button.
Press the UP or DOWN
navigation buttons to toggle
between callers.
Other BT Calling Features
Your BT Diverse 5300 handset helps you
use your Network’s special services. For
full details ask your Network provider.
Options before you make a call
Before making a call you can:
• Withhold your number from being
sent for one call.
• Switch Call Waiting on/off.
• Switch off Ring Back.
• Divert all calls to another number
(must be subscribed to).
BT Diverse Helpline – 08457 908 070
34
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Press the DOWN navigation
button until the display shows
Select Services.
To withhold your number
from being sent
Your number appears on the
display of the person you call.
You can withhold it from the
next call.
MENU
Press the MENU options button.
OK
Press the DOWN navigation
button until the display shows
For All Calls.
OK
Press the DOWN navigation
button until the display shows
Select Services.
OK
Press the OK options button.
The display shows Withhold
Number.
OK
OK
Press the OK options button.
Press the DOWN navigation
button to choose between On
or Off.
OK
BT CALLING FEATURES
OK
Press the OK options button.
Press the DOWN navigation
button until display shows
Call Waiting.
Press the OK options button.
Enter the telephone number
you want to call.
Press the OK options button.
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
Press the OK options button
to dial.
The number is dialled and your
number is withheld for this call.
Ring Back Off
To switch Call Waiting on/off
You can choose whether to have
your Call Waiting service
switched on or off depending on
what you are doing i.e. if you
are using the Internet via your
PC and do not want Call Waiting
to interrupt you.
MENU
Press the MENU options button.
5
jkl
MENU
If you make a call and the
number is engaged you can
set your telephone to ring you
back once the number is free
by pressing 5. If you want to
cancel this request i.e. if you
have to go out before the call
rings back.
Press the MENU button.
Display shows Select
Services.
BT Diverse Helpline – 08457 908 070
35
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
OK
Press the DOWN navigation
button until the display shows
Select Services highlighted.
Press the OK options button.
Press the DOWN navigation
button until Cancel Ringback
is displayed.
OK
Press the DOWN navigation
button until the display shows
For All Calls.
You will hear a Network
message confirming your
divert request.
OK
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
OK
OK
BT CALLING FEATURES
Press the OK options button
again.
Press the UP or DOWN
navigation button to display
the option you want All Calls,
No Answer or When Busy.
Note
OK
Press the OK options button
again.
Select On or Off.
OK
You can divert all incoming
calls to another number where
you can be reached.
You can divert calls:
Press the OK options button.
Display shows Call Divert.
To set Call Divert
Call Divert requires subscription
from your Network provider. You
may be charged a subscription fee.
Press the OK options button.
Press the OK options button.
Enter the telephone number
you want your calls diverted to.
OK
Press the OK options button.
• All calls – calls are put
straight through to the number
you have set.
You will hear a Network
message confirming your
divert request.
• No answer – calls are
forwarded if your phone is
not answered.
Press the RED PHONE button
until you reach the idle display.
• When busy – calls are
forwarded if your phone is
engaged.
MENU
Press the MENU options button.
BT Diverse Helpline – 08457 908 070
36
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Additional features
OK
Voice Mail
You can set the 1 button as a quick
access button to either the answering
machine or your voice mail service if you
have Call Minder or another network
messaging service on your telephone line.
To set one-touch access to
your messages
Press the RED PHONE button
until you reach the idle display.
To set up quick access to
your Voice Mail service when
behind a switchboard e.g.
Meridian Mail
Follow the steps previously
given, but when you come to
enter the telephone number of
your messaging service, you
will need to follow the example
below:
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Voice Mail.
OK
Press the OK options button.
Enter the access number for
your messaging service,
e.g. 7000.
The display shows Set Key 1.
OK
Press the OK options button.
The display shows Network
Mailbox or Answering Machine.
OK
R
Press the OK options button.
To select either Network
Mailbox or Answering Machine.
Press and hold the RECALL
button until P is displayed to
enter a pause in the dialling
sequence.
Enter your extension number,
followed by a hash, e.g. 1234 #.
IF Network Mailbox is selected:
Enter the telephone number
of your messaging service.
For example, 1571 to access the
‘BT Answer’ voice mail service.
ADDITIONAL FEATURES
MENU
Press the OK options button.
Display shows Entry Saved.
R
Press and hold the RECALL
button until P is displayed to
enter another pause in the
dialling sequence.
BT Diverse Helpline – 08457 908 070
37
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Enter your PIN followed by a
hash, e.g. 000000 #.
The entire number should
look like this:
7000P1234#P000000#
OK
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
Note
ADDITIONAL FEATURES
If you store your security PIN as part
of the quick access number, anyone
with access to the handset will be able
to retrieve your messages.
To retrieve messages from
your Voice Mail service
1
Press and hold down the
1 button.
When set up it will take you into
your message service. If during
the set up you entered your
security PIN as well as the
telephone number you will be
taken quickly into your
messages. If the security PIN
was not included you will have
to enter this number now,
followed by a #.
You will then be taken into
your messages.
Press the RED PHONE button
until you reach the idle display.
Call Director
If you have more than one handset
registered to the base station, external
callers can directly dial a specific
handset.
After dialling your phone number, the
caller is asked to select the number of
the person they wish to speak to or
they will hear your personal Call
Director announcement. They will have
5 seconds to dial the internal handset
number. If no one answers, then the
answering machine will pick up the call
after the specified ring delay, if the
answer machine is set to ON. However,
even though only the specified handset
will ring, the call will be displayed and
can be answered by any handset
registered to the base by pressing the
GREEN PHONE button.
For Call Director to work you must
switch the feature on and you will need
to record an announcement.
To switch Call Director on
and off
MENU
Press the MENU options
button.
Press the DOWN button
until the display shows Base
Settings.
OK
Press the OK options button.
BT Diverse Helpline – 08457 908 070
38
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Press the DOWN button
until the display shows Call
Director.
OK
OK
Display shows
Call Director Activation.
Press the OK options button.
Press the DOWN button
until the display shows Record
Announcement.
Display shows
Call Director Activation.
OK
Press the OK options button to
switch on or off. The tick
indicates that Call Director is
switched on.
Press and hold the RED
PHONE button to return to the
idle screen.
OK
OK
OK
To play your Call Director
announcement
MENU
Press the MENU options
button.
Press the DOWN button
until the display shows Base
Settings.
OK
Press the OK options button.
Press the DOWN button
until the display shows Call
Director.
Press the OK options button.
Press the DOWN button
until the display shows Call
Director.
Speak your announcement into
the handset. When you have
finished, press the OK button.
Your announcement will be
played back to you.
Press the MENU options
button.
Press the DOWN button
until the display shows Base
Settings.
Press the OK button. You will
hear a tone.
ADDITIONAL FEATURES
To record a Call Director
announcement
MENU
Press the OK options button.
Display shows Press OK
Speak after tone.
OK
You can record your own
personal Call Director
announcement, a typical
announcement could be, ‘To
speak to John, press 1, to speak
to Anne, press 2,’ or you can use
the pre-recorded announcement.
Press the OK options button.
OK
Press the OK options button.
Display shows
Call Director Activation.
BT Diverse Helpline – 08457 908 070
39
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Press the DOWN button
until the display shows Play
Announcement.
OK
Press the OK options button.
Your announcement will be
played back to you.
To delete your Call Director
announcement
MENU
Press the MENU options
button.
ADDITIONAL FEATURES
Press the DOWN button
until the display shows Base
Settings.
OK
Press the OK options button.
Press the DOWN button
until the display shows Call
Director.
OK
Press the OK options button.
Display shows
Call Director Activation.
Press the DOWN button
until the display shows Delete
Announcement.
Display shows Delete.
Are you sure?.
OK
Press the OK options button
to confirm.
Press and hold the RED
PHONE button to return to the
idle screen.
BT Diverse Helpline – 08457 908 070
40
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Handset settings
You can choose a range of settings to suit your
personal preferences.
Press the LEFT or RIGHT
navigation button to set the
volume level you want.
To change the earpiece volume
and handsfree volume
You can choose from:
OK
• 3 earpiece volume levels
• 5 handsfree loudspeaker
volume levels.
MENU
Press the RED PHONE button
until you reach the idle display.
Press the MENU options button.
To set the ringer volume
and melody
You can choose from:
Press the OK options button.
• 5 ringer volumes (original
setting = 3)
• Crescendo ring (increasing
volume)
• Ringer off
• 10 ringer melodies
The display shows Earpiece
Volume.
OK
Press the OK options button.
You hear the current earpiece
volume.
Press the LEFT or RIGHT
navigation button to set the
volume level you want.
OK
OK
MENU
Press the OK options button.
You hear the current handsfree
volume.
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Audio Settings.
Press the OK options button.
Press the DOWN navigation
button to select the handsfree
volume.
HANDSET SETTINGS
Press the DOWN navigation
button until the display shows
Audio Settings.
OK
Press the OK options button to
confirm and save the settings.
OK
Press the OK options button.
Press the DOWN navigation
button until the display shows
Ringer Volume.
OK
Press the OK options button.
You hear the current ringer
volume.
BT Diverse Helpline – 08457 908 070
41
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Press the LEFT or RIGHT
navigation button to set the
ringer level you want.
OK
Press the OK options button.
Press the DOWN navigation
button to select the ringer
melody.
OK
Press the OK options button.
To change the display
language
MENU
Press the DOWN navigation
button until the display shows
Handset Settings.
OK
Select whether external calls or
internal calls:
OK
HANDSET SETTINGS
OK
Press the OK options button to
confirm and save the settings.
A
is displayed next to the
Set melody.
Press the OK options button.
Press the DOWN navigation
button until the display shows
Language.
Press the OK options button.
Press the UP or DOWN
navigation button to set the
ringer melody you want.
The melody is played and its
number shown.
Press the MENU options button.
OK
Press the OK options button.
Press the DOWN navigation
button to display the language
you want.
OK
Press the OK options button
to confirm.
Press the RED PHONE button
until you reach the idle display.
Press the RED PHONE button
until you reach the idle display.
Shortcut button
If you want to switch the handset
ringer off quickly you can also press
and hold the
button. The
icon is displayed. To turn the handset
ringer back on press and hold down
the
button again and the symbol
will disappear.
BT Diverse Helpline – 08457 908 070
42
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Alarm clock
Note
You can use your handset as an alarm
clock. You must set the date and time
before the alarm will work. The alarm will
ring daily until the setting is turned off.
To set the alarm
The alarm will only sound if the
handset is in idle mode. The alarm
will not sound if the Room Monitor
function is being used.
To stop the alarm ringing
Press the ALARM CLOCK
options button.
When the alarm goes off it
sounds like an incoming call
and lasts for about 30 seconds.
The display will also show
< < < Alarm Clock > > > flashing.
Display shows Alarm Clock.
OK
Press the OK options button.
Display shows Enter alarm
time and the first digit of the
time will be flashing.
OK
To cancel the alarm setting
Press the OK options button.
The alarm will ring daily until
you cancel the setting.
Use the UP/DOWN navigation
button to select am/pm if in 12
hour mode.
OK
Press the ALARM CLOCK
options button.
Press the OK options button.
Display shows Alarm Clock
with a
above the OK
options button.
Display shows Entry Saved.
Press the RED PHONE button
until you reach the idle display.
The
icon will be displayed
in the top right of the handset
display to indicate that the
alarm has been set.
HANDSET SETTINGS
Enter the time you want the
alarm to go off at.
Press any button to switch the
alarm off.
OK
Press the OK options button.
You will hear a tone and the
will disappear. Press the
RED PHONE button until you
reach the idle display.
The
icon will have
disappeared from the top of
the handset display.
BT Diverse Helpline – 08457 908 070
43
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Appointment call
OK
Press the OK options button.
Display shows < Enter Text >.
You can use your handset to remind
yourself of an appointment. You can set
the time and date of the appointment
and enter a name for it. The alarm will
ring on the time and date you have set.
Enter a name for the
appointment, e.g. Dentist,
using the keypad letters.
OK
Press the OK options button.
Display shows Entry Saved.
To set the appointment call
MENU
Press the MENU options
button.
HANDSET SETTINGS
Press the DOWN navigation
button until the display shows
Calender/Clock.
OK
Press the OK options button.
Display shows Set Appointment.
OK
Press the OK options button.
Display shows Enter Date:
and the first digit is flashing.
Press the RED PHONE button
to return to the idle display.
The
icon will be displayed
in the top right of the handset
display to indicate that the
appointment has been set.
Note
Your handset will only display an
appointment if the handset is in idle
mode. An appointment will not be
displayed if the Room Monitor function
is being used or if a call is in progress.
Enter the day and month of
the appointment, e.g . for 20th
May enter 20.05.
OK
Press the OK options button.
Display shows Enter Time:
and the first digit is flashing.
Enter the hours and minutes
of the appointment.
OK
Press the OK options button.
Use the UP/DOWN navigation
button to select am/pm if in 12
hour mode.
BT Diverse Helpline – 08457 908 070
44
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To stop the appointment call
alarm ringing
To switch off your handset’s
beeps and tones
When the alarm goes off it
sounds like an incoming call
and lasts for about 30 seconds.
The display will also flash the
name of the appointment.
OK
• Key beeps when you press
each button on your handset
• Confirmation beeps when you
have finished making a setting
or action on your handset.
• Battery Low warning beep.
You can also set this to sound
only during a call.
Press the OK options button to
switch the alarm off.
To cancel a set
appointment call
Press the MENU options
button.
MENU
Press the DOWN navigation
button until the display shows
Audio Settings.
OK
Press the OK options button.
Display shows Set Appointment
with a
underneath it.
OK
OK
Press the OK options button.
OK
Press the OK navigation
button to switch the key tones
On or Off.
Press the OK options button.
You will hear a tone and the
will disappear to indicate
that the appointment has been
cancelled.
Press the DOWN navigation
button to move to the next line.
OK
Press the OK options button.
Press the UP or DOWN
navigation button to switch the
battery low beep On or Off or to
sound only during a call.
Press the RED PHONE button
until you reach the idle display.
The
icon will have
disappeared from the top of
the handset display.
Press the OK options button.
Press the DOWN navigation
button until the display shows
Advisory Tones.
Press the DOWN navigation
button until the display shows
Calender/Clock.
OK
Press the MENU options button.
HANDSET SETTINGS
MENU
You can switch off and on:
OK
Press the OK options button to
confirm the settings.
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
45
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To switch auto talk on or off
When you receive a call, you
can answer it simply by lifting
the handset off the base station.
This is called auto-talk. When
you switch auto-talk off, you
answer all calls by pressing
the GREEN PHONE button.
MENU
You can restore a handset to
its factory settings.
The handset’s Registration,
the Directory and the Calls list
are not affected.
MENU
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Handset Settings.
OK
To reset a handset
Press the DOWN navigation
button until the display shows
Handset Settings.
OK
Press the OK options button.
HANDSET SETTINGS
Press the OK options button.
A
indicates auto talk is
switched on. Press the OK
options button again to switch
auto-talk off.
Press the RED PHONE button
until you reach the idle display.
Press the OK options button.
Press the DOWN navigation
button until the display shows
Reset Handset.
The display shows Auto
Answer.
OK
Press the MENU options button.
OK
Press the OK options button.
The display shows reset to
default?
OK
Press the OK options button to
confirm reset.
The settings after a reset will be:
Ringer volume
Ringer melody
Auto talk
Battery low beep
Room monitor level
Room monitor level
Time control
Display language
Redial list
3
1
On
On
off
high
off
English
deleted
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
46
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To switch keyguard on and off
OK
C
You can lock the keypad so that
it cannot be used accidentally
while carrying it around.
Press and hold the # button.
When the keyguard is
switched on, the display will
show the
icon.
INT
Press the INT options button
to enter the internal call menu.
Press the UP or DOWN
navigation button to select the
handset you want to change
the name or number of.
Press the DOWN navigation
button to display Change
Handset Name.
OK
Press the OK options button to
confirm.
Press the RED PHONE button
until you reach the idle display.
Note
This name will only appear in the
internal list of handsets.
HANDSET SETTINGS
The handsets when registered
are assigned numbers e.g. INT 1.
You can give the handset a
name instead of a number to
match the user or location,
e.g. Anne or Office.
The name can be up to 10
characters long.
Press the C options button
to delete the old name.
Enter the name you want (see
page 17).
Press and hold the # button to
switch the keyguard off.
To give a handset a name
rather than a number
Press the OK options button.
To change the internal number
of a handset
Your handsets are automatically
assigned internal numbers
between 1-6. You can change
these numbers.
INT
Press the INT options button
to display the list of handsets.
Press the UP or DOWN
navigation button to select the
handset you want.
MENU
Press the MENU options
button.
Edit Handset No. is displayed.
OK
Press the OK options button.
BT Diverse Helpline – 08457 908 070
47
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Enter an available number.
If the number is already
assigned to another handset
you hear a beep. Select another
number.
If required, press the UP or
DOWN navigation button to
select another handset and use
the keypad to change the
number.
OK
Press the OK options button
to confirm.
HANDSET SETTINGS
Press the RED PHONE button
until you reach the idle display.
• The handsets are registered to
different bases but are both set to
Best Base.
• One of the handsets is not registered
and the other handset is registered as
Best Base.
• Neither handset is registered.
To switch walk and talk mode
on and off
To switch walk and talk on:
MENU
Press the MENU options
button.
Press the DOWN navigation
button until the display shows
Additional Features.
Walk and talk
If you have more than one Diverse 5300
handset then you can use the walk and
talk mode. This allows two handsets to
communicate with each other outside
the range of the base station. When they
are out of range, however, they cannot
receive external calls. The maximum
range between the communicating
handsets is 300 metres outdoors in
ideal conditions. Please note that
batteries are used more quickly in walk
and talk mode.
OK
Display shows Room Monitor.
Press the DOWN navigation
button until the display shows
Walk and Talk.
OK
Press the OK options button.
You will hear a tone and the
display will show Walk and Talk.
To switch walk and talk off:
MENU
Communication between two handsets is
possible when:
• Both handsets are registered to the
same base and have currently
selected that base.
Press the OK options button.
Press the MENU options
button.
Display shows Walk and Talk
Off.
OK
Press the OK options button.
The display will return to the
idle screen.
BT Diverse Helpline – 08457 908 070
48
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Room monitor
To use walk and talk
To call a handset:
When you have switched walk
and talk mode on for at least
two handsets as shown on
page 48:
Press the GREEN PHONE
button.
Display will show Walk and Talk
Call to all
To answer a call:
Press the GREEN PHONE
button to take the call.
To end a call:
Press the RED PHONE button.
The following points should be considered
when using the room monitor:
• If you store an external number that
has an answering machine connected,
it should be switched off.
• Make sure Call barring is not set.
• Any incoming calls on the handset
being used as the room monitor will
not ring at the handset, however,
the display will show when you have
a call.
HANDSET SETTINGS
All handsets that are in walk
and talk mode will be called.
The connection will be made
with the first handset to
answer the walk and talk call.
You can use a handset as a room monitor.
If a certain noise level is reached, for
example a baby crying, the handset will
automatically dial an internal or external
number which you have set.
• The battery power is used up more
quickly. If using for long periods of
time it may be advisable to place the
handset in the base to ensure that the
battery does not run out.
• When an external number is called it
will ring for approximately 90 seconds
but room monitor calls to an internal
number are unlimited.
BT Diverse Helpline – 08457 908 070
49
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To enter an external or
internal number for your
room monitor call
MENU
Press the MENU options
button.
To set the room monitor
sensitivity level
MENU
Press the DOWN navigation
button until the display shows
Additional Features.
Press the DOWN navigation
button until the display shows
Additional Features.
OK
Press the OK options button.
OK
Display shows Room Monitor.
OK
Press the OK options button.
Display shows
OK
HANDSET SETTINGS
OK
Press the OK options button.
Press the OK options button.
Or:
To enter an external number:
Press the DOWN navigation
button to scroll to Call
External
OK
Press the OK options button.
Use the UP/DOWN navigation
button to select either Low or
High.
Enter the internal handset
number.
OK
Press the OK options button.
Press the DOWN navigation
button until the display shows
Level.
Either:
OK
Press the OK options button.
Display shows Room Monitor.
Call
Internal
To enter an internal number:
Press the MENU options
button.
OK
Press the OK options button.
A
will be displayed to
indicate that the level has
been set.
Press the RED PHONE button
until you reach the idle display.
and press the OK options
button.
Display shows < Enter Number >
Enter the telephone number.
Display shows Entry Saved
and then Room Monitor set to:
with the last four digits of the
telephone number.
BT Diverse Helpline – 08457 908 070
50
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To switch the room
monitor off
MENU
Press the MENU options
button.
Display will show
Room Monitor off.
OK
Press the OK options button.
To switch the room monitor
off from another phone
HANDSET SETTINGS
When you are called by the
room monitor you can switch
off the room monitor from
that phone.
Answer the call.
9wxyz
Press the 9 and # button.
The room monitor will be
switched off.
Note
The other room monitor functions,
e.g. no ringer will remain until you
press the MENU options button and OK
options button on the handset that is
set to room monitor.
BT Diverse Helpline – 08457 908 070
51
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Base station settings
Base station PIN (Personal
Identification Number)
Your base station PIN has a default
setting of 0000 but you may want to
change this to prevent unauthorised use
of the handset(s).
OK
Press the RED PHONE button
until you reach the idle display.
To reset the base
BASE SETTINGS
If you change your PIN keep a record of
the new number by writing it in the
space provided on page 9.
To change the base station PIN
MENU
OK
You can restore a base station
to its factory settings.
Resetting the base will not affect
the system PIN or handset
registration.
MENU
OK
Press the OK options button.
OK
Press the OK options button.
OK
Press the OK options button.
Repeat the new PIN to confirm.
Press the OK options button.
Display shows reset to
Enter the new PIN.
OK
Press the OK options button.
Enter the current PIN
(original setting = 0000.)
Enter the current PIN
(original setting = 0000).
OK
Press the OK options button.
Press the DOWN navigation
button until the display shows
Base Reset.
Press the OK options button.
Select System PIN.
OK
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Base Settings.
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Base Settings.
Press the OK options button to
save the new PIN.
default?
OK
Press the OK options button to
confirm reset.
BT Diverse Helpline – 08457 908 070
52
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
The settings after a reset will be:
Calls list
deleted
Handset names INT 1- INT 6
Dialling mode
tone
Flash time
100ms
Prefix
deleted
Pause after prefix
3secs
SMS provider Pre-set number
number
switched on
SMS incoming
and outgoing lists
deleted
Voice mail
deleted
Press the RED PHONE button
until you reach the idle display.
To set repeater mode
You can extend the range of
your base station by purchasing
a BT Diverse repeater. This
boosts the signal and allows
you to use your handset
further away from the base
station. If you want to use a
BT Diverse repeater, you must
switch this mode on.
MENU
Press the DOWN navigation
button until the display shows
Base Settings.
Note
OK
Press the OK options button.
BASE SETTINGS
The
icon beside Repeater mode
shows that it is ON.
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Additional Features.
OK
Press the OK options button.
Press the DOWN navigation
button until the display shows
Repeater Mode.
OK
Press the OK options button.
Display shows Change
repeater setting.
OK
Press the OK options button.
The message states “Please
wait”. The phone will return
to the main idle screen
automatically.
BT Diverse Helpline – 08457 908 070
53
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Setting up and
personalising your
answering machine
You can operate your BT Diverse 5350
answering machine from:
• The base unit
• The handset
• Remotely from any external
TouchtoneTM telephone.
ANSWERING MACHINE
The factory setting for the answering
machine is ON, so you can use it as
soon as you have charged up your BT
Diverse 5350. Your callers will be
greeted with a pre-recorded outgoing
message ‘Hello, your call cannot be
taken at the moment, so please leave
your message after the tone’.
You will need to set the date and time
(if you have not already done so) so
that you will know when each message
was received. You can set the date and
time manually (see page 14) or if you
have subscribed to your network’s
Caller Display service, the date and
time will be set automatically as soon
as you receive your first call.
Outgoing messages
The outgoing message is the greeting
a caller first hears when the answering
machine picks up their call. Your BT
Diverse 5350 gives you a choice of
2 outgoing messages, one for ‘Answer
and Record mode’ and one for ‘Answer
Only mode’:
Answer and Record
The pre-recorded outgoing message for
Answer and Record mode is:
“Hello, your call cannot be taken at the
moment, so please leave your message
after the tone”.
If you wish, you can record your own
outgoing message. See ‘To record your
own outgoing message’, on page 55.
When the answering machine takes a
call, your BT Diverse 5350 will play
your Answer and Record message and
then your caller can leave a message.
BT Diverse Helpline – 08457 908 070
54
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Answer Only
There is no pre-recorded message for
Answer Only so you will need to record
your own, remembering to tell your
caller that they will not be able to leave
a message. See ‘To record your own
outgoing message’, opposite.
To record your own outgoing
message
Note
The minimum outgoing
message length is 4 seconds
and the maximum length is
2 minutes and 50 seconds.
When the answering machine takes a
call, your BT Diverse 5350 will play
your Answer Only message but will not
allow your caller to leave a message.
If you record a message of less
than 4 seconds, the display
shows Recording too short!
If you pause during recording
for longer than 2 seconds
recording is stopped.
ANSWERING MACHINE
MENU
Press the MENU options
button.
Press the DOWN button until
the display shows Voice Mail.
OK
Press the OK options button.
Press the DOWN button
until the display shows
Announcements.
OK
Press the OK options button.
The display shows
Record Announcement.
If you want to record a message
for Answer and Record:
OK
Press the OK options button.
Or
BT Diverse Helpline – 08457 908 070
55
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
If you want to record a message
for Answer Only:
OK
Press the DOWN button until
the display shows Record
Announce Only and then press
the OK options button.
To play your outgoing
message
MENU
Press the Down button until
the display shows Voice Mail.
The display shows
Press “OK” Speak after tone.
OK
Press the OK options button
to confirm you are ready to
record your message.
After you hear the short beep,
speak your outgoing message
clearly into the handset.
OK
OK
OK
ANSWERING MACHINE
Or
Press the DOWN button again
to display Play Announce Only
to play the Answer Only
message.
Note
In Answer Only mode – the
display will show Announce
only not available!
Press and hold the RED
PHONE button to return to the
idle screen.
Press the OK options button.
Press the DOWN button until
the display shows Play
Announcement, to play your
Answer and Record message.
The display shows Recording
saved, you hear a confirmation
tone and your message is
played back to you.
If you cancel while recording:
In Answer and Record mode
– the display will show
Announcement deleted! and
the pre-recorded outgoing
message will be used again.
Press the OK options button.
Press the DOWN button
until the display shows
Announcements.
To stop recording press the
OK options button.
To cancel recording at any
time, press the
button.
Press the MENU options
button.
OK
Press the OK options button.
You will hear your outgoing
message via the loudspeaker.
Note
If you have not recorded an
Answer Only outgoing
message the display will
show Announce only not
available!
Press and hold the RED
PHONE button to return to the
idle screen.
BT Diverse Helpline – 08457 908 070
56
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To select the outgoing
message your callers will hear
MENU
Note
If you have not recorded an
Answer Only outgoing
message the display will
show Announce only not
available!
Press the MENU options
button.
Press the Down button until
the display shows Voice Mail.
OK
Press and hold the RED
PHONE button to return to the
idle screen.
Press the OK options button.
Press the DOWN button
until the display shows
Announcements.
OK
Press the OK options button.
OK
If you delete your own outgoing
message:
Press the OK options button.
In Answer and Record mode –
The display shows
To select Answer and Record:
The pre-recorded outgoing
message is automatically
reinstated.
Press the OK options button,
In Answer Only mode –
A
shows Answer and
Record mode is selected.
The answering machine
switches itself off.
Answer and Record.
OK
Or
OK
To select Answer Only:
Press the MENU options
button.
Press the DOWN button again
to display Announce Only.
Press the Down button until
the display shows Voice Mail.
MENU
Press the OK options button.
ANSWERING MACHINE
Press the DOWN button until
the display shows Set Answer
Mode.
To delete your outgoing
message
OK
Press the OK options button.
Press the DOWN button
until the display shows
Announcements.
A
shows Answer Only
mode is selected.
OK
Press the OK options button.
BT Diverse Helpline – 08457 908 070
57
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Press the DOWN button
until the display shows
Delete Announcement.
If you want to delete the Answer
and Record Message:
OK
Press the OK options button.
Answer Delay
Answer delay sets the number of times
your BT Diverse 5350 will ring before
the answering machine picks up a call
and starts playing the outgoing
message.
Or
If you want to delete the Answer
Only message:
Press the DOWN button
again to display
Delete Announce Only.
ANSWERING MACHINE
OK
Then, press the OK options
button.
The display shows
Delete Are you sure?
OK
Press the OK options button to
confirm.
The display shows
Announcement deleted!
Press and hold the RED
PHONE button to return to the
idle screen.
You can choose for the answering
machine to pick up immediately, after
10 seconds, after 20 seconds (pre-set
setting) or after 30 seconds. You can
also select ‘Auto’ which is the Time
Saver setting.
Time Saver can save you the cost of a
call when you want to ring in to find out
if you have new messages.
• If your answering machine answers
after 10 seconds, you have new
messages.
• If it answers after 20 seconds, you do
not have new messages.
So if you wait for approx. 15 seconds,
you can end the call without the cost of
being connected, knowing you have no
new messages.
BT Diverse Helpline – 08457 908 070
58
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To change the answer delay
setting
MENU
Press the MENU options
button.
Press the DOWN button until
the display shows Voice Mail.
OK
Press the OK options button.
Press the DOWN button until
the display shows Ring Delay.
OK
You can specify the time limit your
callers have to leave a message. The
choices are 30 seconds, 60 seconds,
120 seconds (this is the factory setting)
or Maximum (remaining record time).
To adjust the message length
MENU
Press the OK options button.
Press the DOWN button until
the display shows Voice Mail.
OK
Press and hold the RED
PHONE button to return to the
idle screen.
Press the OK options button.
Press the DOWN button until
the display shows Records.
Press the OK options button to
confirm.
A
is shown next to the
selected answer delay setting.
Press the MENU options
button.
ANSWERING MACHINE
Press the UP or DOWN button
to select the setting you want
– Immediately, 10 sec, 20 sec,
30 sec or Auto.
OK
Setting the message length
OK
Press the OK options button.
The display shows Message
Length.
OK
Press the OK options button.
Press the UP or DOWN button
to select the required message
length – Maximum, 30 sec,
60 sec or 120 sec.
OK
Press the OK options button to
confirm.
A
is shown next to the
selected message length.
Press and hold the RED
PHONE button to return to the
idle screen.
BT Diverse Helpline – 08457 908 070
59
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Call screening
From your base station or handset, you
can listen in to a caller leaving their
message. This feature can be switched
on or off on either the handset or on
the base station. The factory setting
is on.
Press and hold the RED
PHONE button to return to the
idle screen.
Note
During a call you can switch off call
screening by pressing the RED PHONE
button.
To use call screening
Quick access button setting
MENU
Press the MENU options
button.
Press the Down button until
the display shows Voice Mail.
ANSWERING MACHINE
OK
Press the OK options button.
Press the DOWN button
until the display shows Call
Screening.
OK
Press the OK options button.
The display shows Handset.
To switch the Handset
Loudspeaker ON or OFF:
OK
Your BT Diverse 5350 comes preset so
that you can quickly access your
answering machine messages by
pressing the ENVELOPE button.
If you have Call Minder or a Network
Messaging Service set up on your BT
Diverse 5350 you may want to change
this setting, so that when you press
the ENVELOPE button you have quick
access to your mailbox, instead of to the
built-in answering machine. For more
information on Voice Mail, see page 37.
Press the OK options button.
A
shows when call
screening is set to ON.
To switch the Base Loudspeaker
ON or OFF:
Press the Down button until
the display shows Base.
OK
Press the OK options button.
A
shows when call
screening is set to ON.
BT Diverse Helpline – 08457 908 070
60
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Using the BT Diverse
5350 answering machine
via the base unit
Note
If the answering machine is being
operated from the handset or it
is recording a message, it cannot
be operated from the base at the
same time.
For more advanced functions you will
need to refer to the instructions in the
section ‘Using the BT Diverse 5350
answering machine via the handset’.
–
Skip
Play/Stop
Skip
/
OGM
Del
Ans
On/Off
Ans
On/Off
Press the ANSWERING
MACHINE button to switch
ON or OFF.
When you switch the answering
machine ON:
The ANSWERING MACHINE
button lights up and the
available recording time is
announced.
In idle mode, the handset
display shows the
icon.
When you switch the answering
machine OFF:
+
Vol
OGM
ANSWERING MACHINE
You can operate and use the main
answering machine functions via the
buttons on the base, when the handset
is in standby mode.
To switch the answering
machine on and off
The ANSWERING MACHINE
button light goes out and the
icon disappears from the
handset display.
Page
BT Diverse Helpline – 08457 908 070
61
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
New message indicator
If you have a new message stored on
your answering machine, the
ANSWERING MACHINE button light
on the base will flash to alert you.
This will still happen, even when the
answering machine is switched off.
To adjust the loudspeaker
volume during playback
–
Press the – button to decrease
the volume.
+
Press the + button to increase
the volume.
To playback messages
Play/Stop
/
Press the /■ button.
During playback:
ANSWERING MACHINE
Skip
Skip
Skip
Skip
Play/Stop
/
Del
Press the button to repeat
the current message.
Press the button twice to
skip back to the previous
message.
Press the button to play the
next message.
Press the button twice to
skip forward to the message
after next.
Press the /■ button to stop
playback.
Press the DEL button to delete
the current message.
BT Diverse Helpline – 08457 908 070
62
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Using the BT Diverse
5350 answering machine
via the handset
Note
When you switch the answering
machine ON:
If the answering machine is being
operated from the base or it
is recording a message, it cannot
be operated from the handset at the
same time.
The ANSWERING MACHINE
button lights up and the
available recording time is
announced.
To switch the answering
machine on and off
MENU
Press the MENU options
button.
Press the DOWN button until
the display shows Voice Mail.
OK
Press the OK options button.
Press the DOWN button until
the display shows Answer
Machine.
OK
Press the OK options button.
The display will show a
when the answering machine
is set to ON.
ANSWERING MACHINE
In idle mode, the display shows
the
icon.
When you switch the answering
machine OFF:
The ANSWERING MACHINE
button goes out and the
icon disappears from the
display.
To interrupt a call
If a caller is leaving a message,
you can interrupt and take the
call at the handset.
While the caller is leaving their
message:
Press the GREEN PHONE
button. The machine stops
recording and you can talk to
your caller.
BT Diverse Helpline – 08457 908 070
63
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Playback begins with the first
new message. At the start of
each message, the number of
the message and the day and
time the message was received
are announced.
Note
If 2 or more seconds have already
been recorded when you take the call,
the call will still be displayed as a
new message.
When all new messages have
been played, old messages will
follow.
New message indicator
If there are no new messages,
just the old messages will play
back.
ANSWERING MACHINE
If you have a new message stored on
your answering machine, the
icon
on the handset display will flash to alert
you. This will still happen, even when
the answering machine is switched off.
At the end of all messages,
you hear the end of messages
tone.
Once you have played back a
message it is classed as an
‘old’ message.
Playing messages
To listen to your messages
Answering machine operation
during playback:
To pause playback:
Press the ENVELOPE button.
MENU
Press the MENU options button,
‘Pause’ is announced and the
display shows Continue.
• The first 2 digits (e.g. 01)
refer to the number of new
messages saved.
OK
Press the OK options button to
resume playback.
• The last 2 digits (e.g. 04)
refer to the number of old
messages saved.
MENU
Press the DOWN button until
the display shows e.g.
Answering Mach. 01+04.
OK
To change the playback volume:
Press the DOWN button until
the display shows Volume.
Press the OK options button.
Your message(s) will be
played back to you over the
handset loudspeaker.
Press the MENU options button,
‘Pause’ is announced and the
display shows Continue.
OK
Press the OK options button.
BT Diverse Helpline – 08457 908 070
64
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Press the LEFT or RIGHT
button to decrease or increase
the volume.
MENU
‘Pause’ is announced.
Press the DOWN button until
the display shows Delete all.
To repeat the current message:
Press the UP button.
OK
To skip back to the previous
message:
Press the UP button twice.
Press the MENU options button.
Press the OK options button.
The display shows Really?
OK
Press the OK options button.
Deleted is displayed and
‘Messages deleted’ is announced.
To play the next message:
Press the DOWN button.
Press and hold the RED
PHONE button to return to the
idle screen.
To skip forward to the message
after next.
Press the DOWN button twice
C
To record a memo message
Press the C options button.
Message deleted! is displayed
and announced.
ANSWERING MACHINE
To delete the current message.
Press and hold the RED
PHONE button to return to the
idle screen.
You can record a memo that
other users can listen to and
delete just like a message that
has been received.
MENU
Press the DOWN button until
the display shows Voice Mail.
Note
If playback is stopped for more than a
minute the answering machine returns
to the idle screen.
To delete all messages
You can only delete old
messages, so you must listen
to your messages before you
can delete them.
Press the MENU options
button.
OK
Press the OK options button.
Press the DOWN button
until the display shows
Record Memo.
OK
Press the OK options button.
Display shows Press OK.
Speak after tone.
OK
Press the OK button and
speak your message.
BT Diverse Helpline – 08457 908 070
65
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
OK
The display shows Entry
Saved and you hear a
confirmation tone.
Press the OK button to stop
recording.
Note
If you press the RED PHONE button
while recording a memo, the recording
will be cancelled and the memo will
not be saved.
To copy a telephone number
of a message to the directory
During message playback:
ANSWERING MACHINE
MENU
Press the MENU options
button.
‘Pause’ is announced.
Press the DOWN button
until the display shows
Copy to Directory.
OK
Press the OK options button.
The display shows the callers
telephone number.
OK
Playback then resumes
automatically.
Operating the answering
machine using voice
activation
You can use voice commands to control
message playback. To use voice activation
you must switch the voice prompts
feature on. Four users (User 1 to 4) can
store a recording of the commands
Delete, Forward and Back. When
recording you must speak all 3 commands
in the above order.
To record your voice
commands
MENU
Press the OK options button.
Press the DOWN button until
the display shows Voice Mail.
The display show
<Enter Name>.
Enter a name using the
keypad.
MENU
OK
Press the MENU options
button.
OK
Press the OK options button.
Press the DOWN button
until the display shows Voice
Prompts.
Press the MENU options
button .
The display shows
Save Entry.
OK
Press the OK options button.
Press the OK options button.
OK
Display shows Record Word.
Press the OK options button.
BT Diverse Helpline – 08457 908 070
66
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Display shows Record Word:
Select User.
OK
Press the OK options button.
Press the UP/DOWN button
to select the User you want
(User 1-4).
OK
Press the OK options button.
Press and hold the RED
PHONE button to return to the
idle screen.
To switch the voice prompts
on and off
Press the MENU options
button.
Press the DOWN button until
the display shows Voice Mail.
OK
Press the OK options button.
Display shows Record Word.
Press the DOWN button
until the display shows Voice
Control.
OK
Press the OK options button
to switch on and off. The tick
indicates that the feature is
switched on.
Press and hold the RED
PHONE button to return to the
idle screen.
ANSWERING MACHINE
You will be prompted to speak
the words Delete, Forward
and Back. You will be asked to
repeat the command each
time. If the command sounds
too different the prompt will
ask you to speak them again.
You will hear a tone to indicate
that the command has been
saved each time.
MENU
OK
Press the OK options button.
Display shows Press OK.
Speak after tone.
OK
Press the DOWN button
until the display shows Voice
Prompts.
To operate the answering
machine using voice activation
Whilst playing messages using
the handset:
Press and hold the GREEN
PHONE button.
The loudspeaker will come on
and you will hear a tone.
Speak your command (Delete,
Forward or Back). If deleting a
message, you will be asked to
repeat the word Delete to
confirm deletion.
Press the OK options button.
BT Diverse Helpline – 08457 908 070
67
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Remote access
When you end the call, your
answering machine will be
switched on.
You can operate your answering
machine from any external TouchtoneTM
phone by phoning your BT Diverse 5350
and entering your base station PIN.
Using this code prevents other people
from accessing your answering machine
functions without your permission.
To access and play your
answering machine messages
from another phone
IMPORTANT
REMOTE ACCESS
You must change the base station
PIN from the Original setting of 0000
for your remote access to function.
See ‘To change the base station PIN’,
page 52.
Dial your telephone number.
When you hear your outgoing
message:
9wxyz
Press the 9 button.
Enter your base PIN.
Your machine tells you
whether you have any new
messages. The messages are
now played back.
To switch on your answering
machine from another phone
If you forget to switch your
answering machine on, you
can do it from another phone.
To control the answering machine
functions during playback:
Dial your telephone number
and let the phone ring for
approximately 1 minute.
1
To repeat the current message.
Press twice to skip back to
previous message.
When you hear the
announcement ‘Please enter
PIN’. Enter the base PIN
(must be changed from 0000).
2 abc
To pause/resume playback.
3 def
To skip forward to the next
message.
The recording time left will be
announced. Any messages are
played back to you.
Press twice to skip to the
following message.
0 +
To delete the current message.
BT Diverse Helpline – 08457 908 070
68
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Using additional
handsets and bases
Up to six handsets can be registered
and operated from the BT Diverse 5350
base station. This allows you to make
an internal call between two handsets
while a third is making an external call.
1
1
INT
MENU
➤
4
ghi
7 pqrs
MENU
➤
1
INT
➤
2 abc
3 def
1
5
jkl
6 mno
4
8
tuv
9wxyz
7 pqrs
ghi
0 +
➤
2 abc
3 def
5
jkl
6 mno
8
tuv
9wxyz
Registering additional
handsets
If you purchase new handsets to use
with your current BT Diverse 5350,
they will not be pre-registered to a base
station. You will need to do this before
you can use them.
0 +
R
R
BT Diverse 5350
1
ADDITIONAL HANDSETS
To register a new BT Diverse
5300 handset to a 5350 base
station
1
MENU
➤
1
4
ghi
7 pqrs
INT
MENU
➤
INT
➤
2 abc
3 def
5
jkl
6 mno
8
tuv
9wxyz
–
+
Vol
1
Skip
Play/Stop
Skip
/
0 +
4
ghi
7 pqrs
Del
Ans
On/Off
R
Page
1
MENU
INT
➤
➤
➤
2 abc
3 def
1
2 abc
3 def
ghi
5
jkl
6 mno
4
ghi
5
jkl
6 mno
7 pqrs
8
tuv
9wxyz
7 pqrs
8
tuv
9wxyz
4
0 +
R
jkl
6 mno
tuv
9wxyz
For this method of registration
your handset must be a
BT Diverse 5300.
MENU
➤
1
3 def
5
8
Place your handset in the base
station.
1
INT
2 abc
0 +
OGM
R
➤
0 +
Ensure that the handset is
switched on.
R
Each handset can only be registered
with one base at a time.
After about 1 minute, the
handset’s internal number will
be displayed, e.g. INT 2.
The next available internal
number (2-6) has been
automatically assigned to the
handset.
BT Diverse Helpline – 08457 908 070
69
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Note
If all internal numbers have been
assigned then the internal number 6
will be re-assigned.
You can change the internal handset
number if you wish, see page 47.
To manually register a
BT Diverse 5300 handset to
another base station
ADDITIONAL HANDSETS
If you want to register your
handset to another base station
you will need to manually
register it.
On the handset to be registered:
MENU
Page
If the base station is a
BT Diverse 5310 or 5350 base
press the PAGE button for
approximately three seconds.
After approximately one minute
the handset will display its
internal number. The handset
is now registered and the
handset display will return to
the idle screen.
If the base is not a 5310 or
5350 you will need to follow
the user guide for the base
station you are registering the
5300 handset to.
Note
To make internal calls or page
handsets, see page 28.
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Handset Settings.
OK
Press the OK options button.
Press the DOWN navigation
button until the display shows
Register Handset.
OK
Press the OK options button.
Enter system PIN.
OK
Press the OK options button.
BT Diverse Helpline – 08457 908 070
70
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To register BT Diverse 2000/
3000/4000 series handsets
and other makes
To de-register a handset
INT
Providing your handset is
GAP (Generic Access Profile)
compliant, you can register it
to your BT Diverse 5350 base.
Place your handset into
registration mode according
to the instructions in its user
guide.
Page
Note
To check that the handset has
registered successfully to the base,
press the PAGE button, all handsets
will ring.
Press the UP or DOWN
navigation button to select the
handset you want to de-register.
MENU
Press the MENU options button.
Press the DOWN navigation
button until the display shows
De-register Handset.
OK
Press the OK options button.
ADDITIONAL HANDSETS
When the handset is in
registration mode, you will
need to press the PAGE button
located on the top of your
BT Diverse 5350 base station,
for approximately three
seconds. After a short period
of time the handset will be
registered. The BT Diverse
5350 will allocate the next
available handset number.
Press the INT navigation
button to display the list of
internal handsets registered
to the base.
Enter the base station PIN
(original setting = 0000).
OK
Press the OK options button.
Display shows de-register
handset?
OK
Press the OK options button
to confirm de-registration.
Press the RED PHONE button
to return to the idle screen.
BT Diverse Helpline – 08457 908 070
71
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Help
Try these solutions to the most common problems.
Problem
Possible cause
Solution
Handset not registering.
The base is not powered.
There are no batteries in the
handset.
Make sure that the power supply
is plugged in at the base and
switched on. Make sure that the
rechargeable batteries (included)
are fitted in the handset correctly.
Switch the handset off and then
back on again, place the handset
on to the base again and leave
for approx. 1 minute to try
registering again.
HELP
If this is still unsuccessful, then try a
manual registration (see page 70).
You have forgotten your base
station PIN number.
You have changed the PIN.
Try entering the default PIN (0000).
If you have changed the PIN and
cannot remember the number you
will need to contact the BT Diverse
Helpline on 08457 908070.
No display.
The handset is switched off.
Hold down RED PHONE for
1 second.
Charge or replace the batteries.
Nothing happens when you press
any button.
Keyguard may be switched on.
Hold down the # button for
1 second.
No connection between handset
and base station.
Are you out of range of the base
station.
Move closer to the base station.
Handset is not registered.
Register the handset.
Base station is not switched on.
Check the mains power is connected
correctly.
Is the handset placed on the base
properly?
Make sure that the handset is placed
on the base or in the charger correctly.
You will hear a confirmation tone.
Are the batteries in correctly?
Check that you have put the batteries
in the right way, you will hear a
confirmation tone.
Handset on the base does not
charge.
BT Diverse Helpline – 08457 908 070
72
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Handset does not ring.
The handset ringer may be
switched off.
Hold down ✱ to switch the ringer
back on.
The incoming caller’s number is
not displayed even though you
have Caller Display.
The caller’s number has been
withheld.
Caller has to allow their number to
be sent.
You keep hearing the error beep
(a descending tone).
You have pressed the wrong
button in a sequence.
Check the prompts in the display
or refer to instructions in the
user guide.
The answering machine does
not record any messages or
announcements.
Memory is full.
Delete old messages.
An answering machine message
does not have a time stamp.
The date/time is not set.
Set the date/time, see page 13.
During remote operation you are
unable to access messages
You have not changed the base
station PIN.
Change the base station PIN to
allow you to access messages
from another phone.
You cannot record your voice
pattern for voice activation.
Your recordings might have
sounded too different or were
not clear enough.
Try recording again but ensure you
speak clearly and record the words
using a similar tone.
You cannot dial, or use the
answering machine via voice
activation.
Your speech or commands were
not clear enough or, you have
not recorded the voice activate
for these commands.
Try speaking more closely or, ensure
voice activation is initiated.
Playback and delete new messages.
HELP
BT Diverse Helpline – 08457 908 070
73
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
General information
Within the 12-month guarantee period:
Guarantee
Your BT Diverse 5350 is guaranteed for
a period of 12 months from the date of
purchase.
GENERAL INFORMATION
Subject to the terms listed below the
guarantee will provide for the repair of,
or at BT’s or its agent’s discretion the
option to replace the BT Diverse 5350,
or any component thereof, (other than
batteries), which is identified as faulty
or below standard, or as a result of
inferior workmanship or materials.
Products over 28 days old from the
date of purchase may be replaced with
a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to
defects that occur within the 12
month guarantee period.
• Proof of purchase is provided.
• The equipment is returned to BT or
its agent as instructed.
• This guarantee does not cover any
faults or defects caused by accidents,
misuse, fair wear and tear, neglect,
tampering with the equipment, or
any attempt at adjustment or repair
other than through approved agents.
If you experience difficulty using the
product, prior to returning your
product, please read the Help section
beginning on page 72, or contact the
BT Diverse Helpline on 08457 908070
for assistance.
In the unlikely event of a defect
occurring, please follow the Helpline’s
instructions for replacement or repair.
Outside the 12-month guarantee period:
If your product needs repair after the
guarantee period has ended, the repair
must meet the approval requirements
for connection to the telephone network.
We recommend that you call the Helpline
on 08457 908070 and ask for details
of our recommended repair agents.
BT Accessories and
Replacement Items
For a full range of accessories and
replacement items for BT products
please call 0870 240 5522,
or visit:
• This guarantee does not affect your
statutory rights.
BT Diverse Helpline – 08457 908 070
74
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Technical information
How many telephones can you have on
the line?
All items of equipment have a Ringer
Equivalence Number (REN) which is
used to calculate the number of items
that may be connected to any one
telephone line.
Switchboard compatibility
Generally this telephone may be
connected to switchboards. In the event
of any difficulties please consult your
switchboard Service Provider.
To set the dialling mode
The BT Diverse 5350 (with up to 6
handsets) has a total REN of 1.
You need only adjust this
setting if your switchboard does
not operate with the pre-set
tone dialling. You can change
the dial mode to pulse dialling.
Any other instrument provided by
BT may be assumed to have a REN of
1 unless stated otherwise.
MENU
Press the DOWN navigation
button until the display shows
Base Settings.
OK
Only use approved power supply item
code M- GA35 - 095130F.
This equipment complies with the
essential requirements for the Radio
Equipment and Telecommunications
Terminal Equipment Directive
(1999/5/EC). In demonstration with
the Essential Requirement for efficient
use of the radio spectrum, the product
complies with TBR6. For a copy of the
Declaration of Conformity please
contact the BT Diverse Helpline on
08457 908070.
Press the OK options button.
Press the DOWN navigation
button until display shows
Additional Features.
R&TTE
This product is intended for use within
the UK for connection to the public
telephone network and compatible
switchboards.
Press the MENU options button.
GENERAL INFORMATION
A total REN of 4 is allowed per telephone
line. (For example: if the BT Diverse 5350
is used in conjunction with three
extension telephones, each with a REN
of 1, then the total REN = 4)
OK
Press the OK options button.
Display shows Dialling Mode.
OK
Press the OK options button.
Press the DOWN navigation
button to select:
– Tone (with TBR)
– Pulse (with Earth Recall)
– Tone-Earth (tone with
Earth loop recall)
OK
Press the OK options button
to confirm. The display shows
Entry Saved.
Press the RED PHONE button
until you reach the idle display.
BT Diverse Helpline – 08457 908 070
75
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
To set the recall time
To switch temporarily from
pulse to tone dialling
You need only adjust this setting
if your switchboard requires a
different recall time to the
pre-set recall time of 100ms.
MENU
If you are using pulse dialling
with your switchboard but
need tone dialling to use
certain functions on your
BT Diverse 5350 you can switch
to tone dialling during the call.
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Base Settings.
OK
Press the OK options button.
During your call:
MENU
Press the DOWN navigation
button until the display shows
Tone dialling.
GENERAL INFORMATION
Press the DOWN navigation
button until the display shows
Additional Features.
OK
Press the OK options button.
Press the DOWN navigation
button until the display shows
Recall.
OK
Press the OK options button.
Press the DOWN navigation
button to select the recall time
80, 100, 120, 180, 250,
300ms or 600ms.
OK
Press the MENU options button.
OK
Press the OK options button.
Tone dialling is now active.
Press the RED PHONE button
until you reach the idle display.
Note
This setting is only for the duration of
the call.
Press the OK options button to
confirm. The display shows
Entry Saved.
Press the RED PHONE button
until you reach the idle display.
Note
100 ms is the standard setting for most
UK switchboards.
BT Diverse Helpline – 08457 908 070
76
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Setting pauses
To set the duration of a pause
Note
If you want to insert a pause into a
telephone number you are storing in
your directory, start storing the
number (see page 17) and where a
pause is needed press and hold the
RECALL button, the pause is added
and stored with the number.
To set a pause before dialling
R
MENU
8
You can set the length of a
pause that is inserted after
pressing the RECALL button.
Press the MENU options
button.
tuv
Press the 8 button.
9wxyz
Press the 9 button.
1
Press the 1 button.
2 abc
Press the 2 button.
Enter the pause length:
MENU
8
Press the MENU options
button.
tuv
Press the 8 button.
9wxyz
Press the 9 button.
1
Press the 1 button.
1
Press the 1 button.
OK
GENERAL INFORMATION
1 = 800ms
2 = 1600ms
3 = 3200ms
You can insert a pause to allow
your switchboard time to get
a line before your BT Diverse
5350 dials the number.
Press the OK options button to
confirm the setting.
Enter the number for the
corresponding pause length
(e.g. 4 for 6 seconds):
1 = 1 second
2 = 2 seconds
3 = 3 seconds
4 = 6 seconds.
OK
Press the OK options button
to confirm the setting. ‘Entry
Saved’ is displayed.
BT Diverse Helpline – 08457 908 070
77
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Index
Additional handset and bases
INDEX
69
Alarm clock
43
Answering machine
54
answer and record
54
answer delay
58
answer only
55
call screening
60
on/off
61, 63
memo
65
outgoing messages
54
delete outgoing message
57
message length
59
new message indicator
62, 64
play
62, 64
recording outgoing message
55
remote access
68
using via base
61
using via handset
63
voice activated operation
66
Appointment call
44
Auto talk on/off
46
Base station PIN
52
52
Base station reset
Batteries
charging
installing
performance
replacing
warning beeps
Beeps and tones
Belt clip
12
12
13
13
13
45
14
Call Director
38
Call screening
Call timer
Call Waiting
Caller Display
Calling Features
Call Divert
Caller Display
Calls list
Call Waiting
Ring Back
withhold your number
Voice Mail
Calls list
copy to directory
delete a call
delete complete list
dial a number from
display status of call
display time of call
view
Calls
end
external
handsfree
holding
internal
making
on hold
receiving
redial
secrecy
transferring
Character map
BT Diverse Helpline – 08457 908 070
78
60
15
34
31
31
36
31
31
34
35
35
37
31
33
33
33
32
32
32
32
15
15
16
29
28
15
29
16
27
28
28
18
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Date set
14
Earpiece volume
21
33
33
21
62, 65
57
27
71
75
17
18
20
21
21
21
19
20
22
17
19
19
22
8
Ending calls
External calls
Extra directory
41
15
15
22
Guarantee
74
47
15
46
41
7
16
72
29
Internal calls
Internal number – change
28
47
Keyguard
Language change
47
42
Listening in
Loudspeaker volume
30
64
Main menu
Making calls
Melody
Memo
Message length adjust
Music on hold
Name a handset
4
15
41
65
59
29
47
On/off
answering machine
auto talk
beeps and tones
handset power
keyguard
secrecy
voice announcement
Page a handset
Handset
beeps and tones
change internal number
display icons
melody
45
47
8
41
INDEX
Delete
all directory numbers
calls list call
complete Calls list
directory entry
messages
outgoing message
redial list
De-register handset
Dialling mode
Directory
character map
copy entry to another
handset
copy directory to another
handset
delete all entries
delete an entry
dial a number
edit an entry
extra directory
store name and number
view an entry
VIP ringing
voice activated dialling
Display icons
naming
on/off
reset
ringer
Handset settings quick guide
Handsfree
Help
Holding calls
Pause
Phone socket
PIN
61, 63
46
45
15
47
28
67
28
77
14
52
BT Diverse Helpline – 08457 908 070
79
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Playback messages
copy telephone number
to directory
delete
delete all
new message indicator
pause
repeat current message
play next message
skip forward
skip backward
volume
Power connection
Preparatory dialling
Pulse dialling
62, 64
66
62, 65
62, 65
62, 64
62, 64
62, 65
62, 64
62, 65
62, 65
64
11
15
75
Quick guide
display icons
handset settings
Range warning
8
7
13
53
76
16
27
27
27
27
INDEX
Repeater mode – set
Recall time
Receiving calls
Redial
copy to directory
delete
dial number in redial list
Registering
additional handsets
69, 71
manually
70
your handset
12
Remote access
68
REN, how many phones can I have? 75
Reset
base settings
52
handset settings
46
Room monitor
49
Safety information
Screening calls
Secrecy
Setting up
Switchboard compatibility
Technical information
Telephone line cord
Time – set
Tone dialling
Transferring calls
75
14
14
75
28
VIP ringing
19
Voice activated answering
machine operation
66
Voice activated dialling
22
Voice announced Caller Display
33
Voice Mail
37
retrieve messages
38
set one-touch access
37
set up quick access behind
switchboard
37
Volume
base loudspeaker
64
earpiece
41
handset ringer
41
handsfree
16, 41
Walk and talk
BT Diverse Helpline – 08457 908 070
80
10
60
28
11
75
48
BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
Visit us at www.bt.com
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of
contract. Nothing in this publication forms any part of any contract.
© British Telecommunications plc 2003.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
BT Diverse 5350 (06/03) 5
Designed and produced by The Art & Design Partnership Ltd.
Siemens number: A31008-C250-P101-✱-7619
0682
CE compliant to R&TTE Directive (1999/5/EC)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising