DTS MOON 575 User manual
Add to my manuals12 Pages
DTS MOON 575 is a high-performance moving head spotlight with a 575W HMI lamp, designed for professional use in theaters, concert halls, and other venues. It features a CMY color mixing system, a mechanical iris for beam shaping, and a forced ventilation system for cooling. Its compact size and lightweight make it easy to transport and set up. With its wide range of features, the DTS MOON 575 is a versatile tool for creating dynamic and visually stunning lighting effects.
advertisement
▼
Scroll to page 2
of 12
MOON 575 Manuale Istruzioni Ver. 1.2 ITA User’s Manual Rel. 1.2 ENG D.T.S. Illuminazione srl - ITALY http://www.dts-lighting.it Made in Italy 2 MOON ARC 1200575 Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso scritto della DTS . DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di design a ciascun proprio prodotto. DTS non assume alcuna responsabilità sull’uso o sull’applicazione dei prodotti o dei circuiti descritti. The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from DTS. DTS reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. DTS assumes no responsibility for the use or application of the ITA INDICE DATI TECNICI IMPORTANTI INFORMAZIONI DI SICUREZZA SICUREZZA LAMPADA COME MONTARE LA LAMPADA VENTILAZIONE FORZATA CONNESSIONE ALLA RETE ELETTRICA SOSTITUZIONE DEL DIAFRAMMA PULIZIA PERIODICA CONTROLLI PERIODICI PAG PAG PAG PAG PAG PAG PAG PAG PAG PAG 3 3 3 4 4 4 4 5 5 5 PAG PAG PAG PAG PAG PAG PAG PAG PAG PAG 6 6 6 7 7 7 8 8 8 8 ENG INDEX TECHNICAL DATA IMPORTANT SAFETY INFORMATION SAFETY LAMP MOUNTING THE LAMP FORCED VENTILATION MAINS CONNECTION REPLACING IRIS PERIODIC CLEANING PERIODIC CONTROLS MOON ARC 1200575 3 ITA DATI TECNICI ALIMENTAZIONE : 230V 50/60 Hz (115V 60 Hz a richiesta) POTENZA ASSORBITA 600 VA CON RIFASAMENTO INCORPORATO LAMPADA : HMI 575W a scarica ATTACCO LAMPADA: SFC10- 4 COLORI : sistema CMY con filtri dicroici ad alta resa cromatica + bianco BLACK OUT ANGOLO DI APERTURA: da 2,5° a 13° (Iris meccanico) PROFILO IN ALLUMINIO POSIZIONI DI FUNZIONAMENTO: orizzontale 45° PESO: 22 Kg 450mm 360mm 870mm IMPORTANTI INFORMAZIONI DI SICUREZZA Prevenzione degli incendi: 1 Moon 575 utilizza una lampada Philips MSI 575 o Osram HMI575; l'uso di una lampada differente potrebbe essere rischioso e causa dell'annullamento della garanzia. 2 Non installate mai l'apparecchio su superfici infiammabili. 3 La distanza minima dal materiale infiammabile deve essere: 0,5 m. 4 La distanza minima dal primo possibile soggetto illuminabile deve essere: 2 m. 5 Sostituite i fusibili danneggiati solo con identici per dimensioni e valore. Prevenzione di scosse elettriche: 1 Alta tensione all'interno dell'apparecchio, togliete tensione prima di aprire o di effettuare qualsiasi operazione a contatto o all'interno del proiettore, anche la sostituzione e installazione della lampada. 2 Il livello tecnologico di MOON 575, necessita di personale specializzato per qualsiasi tipo di intervento; rivolgetevi ai centri assistenza autorizzati DTS. 3 Una buona connessione di terra è essenziale per il corretto funzionamento. 4 Non collegate mai l'apparecchio senza il contatto di terra. 5 Non installate mai l'apparecchio esposto alla pioggia o in ambienti ad alta umidità o senza flusso di aria costante. 6 E' consigliato l'uso di un interruttore magnetotermico/differenziale per l'alimentazione di ogni Moon 575. Protezione contro le radiazioni dei raggi ultravioletti: 1 Non accendete mai la lampada se le lenti , i filtri o parti meccaniche sono danneggiati; la loro funzione schermante è efficace solo se in perfette condizioni. 2 Non guardate mai direttamente in direzione della lampada quando è accesa. SICUREZZA 1 Installate sempre il proiettore con supporti in grado di sostenerne il peso. 2 Sostituite sempre la lampada se notate deformazioni o danneggiamenti. 3 Non installate mai l'apparecchio in locali dove non esiste flusso di aria costante; la temperatura ambiente massima deve essere 35°C. 4 La lampada calda potrebbe esplodere, attendete sempre almeno 10 minuti dopo lo spegnimento prima di tentare la sostituzione o rimozione. Utilizzate sempre protezioni per le ani prima di cambiare la lampada. Nelle parti interne del proiettore, la temperatura può4raggiungere 250° C dopoARC 5 minuti, con MOON 575 1200 cco massimo ITA di 350° C; assicuratevi quindi che la lampada sia fredda prima di tentarne la mozione. L'apparecchio, in ogni caso, si può aprire solo dopo 10 minuti dal momento in cui mani prima di cambiare la lampada. ete tolto alimentazione. 5 Nelle parti interne del proiettore, la temperatura può raggiungere 250° C dopo 5 minuti, con picco massimo di 350° C; assicuratevi quindi che la lampada sia fredda prima di tentarne la ado di protezione contro la corpi solidi rimozione. L'apparecchio, in penetrazione ogni caso, si puòdi aprire solo dopo e 10liquidi: minuti dal momento in cui Il proiettore rientra nella classificazione di apparecchio ordinario, il suo grado di protezione avete tolto alimentazione. ntro la penetrazione di corpi solidi e liquidi è IP 20. Il proiettore contiene particontro elettriche ed elettroniche che non possono assolutamente essere Grado di protezione la penetrazione di corpi solidi e liquidi: Il proiettore nella di apparecchio il suo grado dine protezione esse a1 contatto conrientra acqua, olioclassificazione o qualsiasi altro liquido: il ordinario, buon funzionamento risulterebbe contro la penetrazione di corpi solidi e liquidi è IP 20. egiudicato. 2 Il proiettore contiene parti elettriche ed elettroniche che non possono assolutamente essere messe a contatto con acqua, olio o qualsiasi altro liquido: il buon funzionamento ne risulterebbe AMPADA: INSTALLAZIONE E SOSTITUZIONE pregiudicato. tenzione: Togliete tensione prima di aprire l'apparecchio. ilips: MSI 575 o OSRAM: HMI 575 LAMPADA: INSTALLAZIONE E SOSTITUZIONE tenzaAttenzione: 575W Togliete tensione prima di aprire l'apparecchio. sso luminoso 49.000 Philips: MSI 575 olm OSRAM: HMI 575 mperatura di 575W colore 6000 °K Potenza tacco flusso SFC10-4 luminoso 49.000 lm temperatura di colore rata approssimativa 10006000 ore °K Attacco SFC10-4 durata approssimativa ore e deve essere maneggiata con molta cura; attenetevi lampada usata è in vetro 1000 di quarzo rupolosamente alle istruzioni incluse nell'imballo della lampada. Non toccate direttamente il La lampada usata è in vetro di quarzo e deve essere maneggiata con molta cura; attenetevi tro, usate l'involucro di politene accluso nella scatola. scrupolosamente alle istruzioni incluse nell'imballo della lampada. Non toccate direttamente il vetro, usate l'involucro di politene accluso nella scatola. OME MONTARE LA LAMPADA sicurarsi che Moon 575 sia alimentato, sfilare la parte superiore svitando gli appositi COME MONTARE LAnon LAMPADA mellini. Assicurarsi che Moon 575 non sia alimentato, sfilare la parte superiore svitando gli appositi r montare la lampada avvicinarla al portalampada, passando dalla parte anteriore della pomellini. Per la nel lampada avvicinarlafermandola al portalampada, parte anteriore della rabola edmontare inserirla portalampada con i passando due dadi dalla a ghiera. parabola ed inserirla nel portalampada fermandola con i due dadi a ghiera. VENTILAZIONE FORZATA ENTILAZIONE FORZATAil proiettore, che vi sono varie prese d'aria e una ventola di Noterete, osservando terete, osservando ilnon proiettore, sono varie prese Questo d'aria e una ventola di raffreddamento; ostruiteleche maiviper nessun motivo! comporterebbe il freddamento; non ostruitele mai per con nessun motivo! Questo comporterebbe surriscaldamento dell'apparecchio, il rischio di comprometterne seriamenteilil funzionamento rriscaldamento dell'apparecchio, con il rischio di comprometterne seriamente il funzionamento CONNESSIONE ALLA RETE ELETTRICA Il proiettore può funzionare ad una tensione 230V a 50 o 60 Hz; DTS seleziona (salvo richieste ONNESSIONE ALLA RETE ELETTRICA specifiche), la frequenza 50 tensione Hz. proiettore può funzionare ad di una 230V a 50 o 60 Hz; DTS seleziona (salvo richieste Prima di alimentare il proiettore, assicuratevi dunque che il modello in vostro possesso ecifiche), la frequenza di 50 Hz. ma di alimentare il proiettore, assicuratevi dunque che il modello in vostro possesso MOON ARC 1200575 5 ITA corrisponda alla tensione di alimentazione richiesta dalla vostra rete elettrica. Per l'allacciamentoalla rete, utilizzate un connettore adatto a sopportare la massima corrente di assorbimento istantaneo: 8 amps a 230V. Attenetevi scrupolosamente alle norme in vigore. SOSTITUZIONE DEL DIAFRAMMA 1 Assicurarsi che Moon 575 non sia alimentato, svitare gli appositi pomellini. (foto1) 2 Sfilare la parte superiore. (Foto 2) 3 Fare pressione sull’ aletta ferma diaframma e sfilare il diaframma (foto 3) * POSIZIONE dell’Aletta ferma diaframma * FOTO 1 FOTO 2 FOTO 3 PULIZIA PERIODICA Lenti , parabola e filtri colore Anche un sottilissimo strato di polvere può ridurre in modo sostanziale la resa luminosa ed alterare la compattezza del fascio: pulite dunque regolarmente le lenti , la parabola e i filtri dicroici utilizzando un pannomorbido o del cotone, inumiditi con un liquido detergente specifico per la pulizia del vetro. Ventole e feritoie di passaggio aria Le ventole e le feritoie di passaggio aria devono essere pulite ogni 6 settimane circa; il periodo che deve trascorrere tra una pulizia e la successiva dipende anche dall'ambiente in cui il proiettore opera.Per eseguire questo tipo di pulizia utilizzate un pennello ed un comune aspirapolvere o un generatore di aria compressa. Se necessario, non esitate a eseguire la manutenzione anche in tempi più brevi. CONTROLLI PERIODICI Lampada Sostituite la lampada se ha subito danni visibili o se si è deformata; eviterete così pericoli di Esplosione. Parti elettriche Controllate i collegamenti elettrici, in particolare la messa a terra Sostituzione dei fusibili Localizzate il fusibile di protezione lampada posto sul pannello posteriore del MOON 575. Controllate con uno strumento idoneo le condizioni del fusibile; qualora risulti danneggiato, sostituitelo con un altro di pari valore. MOON ARC 1200575 6 ENG TECHNICAL DATA POWER SUPPLY: 230 V 50/60 Hz (115V 60Hz on request) POWER CONSUMPTION : 600 VA with built in PFC LAMP: HMI 575 W discharge lamp (750 hours) COLORS: CMY colour changer with dichroic filters + white BEAM ANGLE: from 2,5° to 13° (mechanical Iris) BLACK OUT EXTRUDED ALLUMINIUM WORKING POSITION: Horizontal 45° WEIGHT: Kg 22 450mm 360mm 870mm IMPORTANT SAFETY INFORMATION Fire prevention: 1MOON 575 uses a Philips 575 MSI or Osram HMI575 lamp. The use of any alternative lamp is not recommended and will null and void the fixture's warranty. 2 Never locate the fixture on any flammable surface. 3 Minimum distance from flammable materials: 0.5 m. 4 Minimum distance from the closest illuminable surface: 2 m. 5 Replace any blown or damaged fuses only with those of identical value. Refer to the wiring diagram if there is any doubt. 6 Connect the projector to mains power via a thermal magnetic circuit breaker. Prevention of electric shock: 1 High voltage is present inside the unit. Isolate the projector from the mains supply prior to performing any function which involves touching the inside of the unit, including lamp replacement. 2 The level of technology inherent in the MOON 575 requires the assistance of specialised personnel for all servicing. Refer all work to your authorised DTS service centre. 3 A good earth connection is essential for proper functioning of the projector. Never connect the unit without proper earth connection. 4 The fixture should never be located in a position exposed to rain or in areas of extreme humidity. 5 A steady supply of circulating air is essential. Protection against ultraviolet radiation: 1 Never turn the lamp on if any of the lenses or mechanical parts are damaged. Their respective shielding functions will only operate efficiently if they are in perfect working order. 2 Never look directly into the lamp when it is on. SAFETY 1 The projector should always be installed with fixtures that are capable of supporting the weight of the unit. 2 Always replace the lamp if any physical damage is evident. 3 Never install the fixture in an enclosed area lacking sufficient air flow. e ambient temperature should not exceed 35°C. MOON 7 ARC 1200575 A hot lamp ENG may explode, so always wait for at least 10 minutes to elapse after the unit has en turned off prior to attempting to replace the lamp. Always wear suitable hand protection when handling the lamp. The ambient temperature should not exceed 35°C. 4 A hot lamp may explode, so always wait for at least 10 minutes to elapse after the unit has vel of protection the penetration solid and liquid matter been turned off against prior to attempting to replaceof the lamp. The projector classified an protection ordinary appliance and its 5 Always is wear suitableas hand when handling the level lamp.of protection against the netration of solid and liquid matter is IP 20. The projector contains electric and electronic components which should under no Level of protection against the penetration of solid and liquid matter 1 The projector is classified an oil, ordinary and itsliquid. level of protection cumstances come into contact as with waterappliance or any other The proper against workingthe of the penetration of solid and liquid matter is IP 20. it would be compromised should this occur. 2 The projector contains electric and electronic components which should under no circumstances come into contact with oil, water or any other liquid. The proper working of the OUNTING THE LAMP unit would be compromised should this occur. arning: Remove mains power before opening the unit. ilips: MSI 575 or OSRAM: HMI 575 MOUNTING THE LAMP wer 575W Warning: Remove mains power before opening the unit. minous flux 49,000 Philips: MSI 575 lm or OSRAM: HMI 575 lour temperature Power 575W 6000°K mp socket SFCflux 10-4 Luminous 49,000 lm Colour temperature 6000°K ted life 1,000 hours Lamp socket SFC 10-4 Rated lifeis1,000 hours e lamp used manufactured from quartz glass and should be handled with care. Always here to the instructions supplied in the lamp's packaging. Never touch the glass directly but lamp used is manufactured from quartz glass and should be handled with care. Always e the The tissue provided in the lamp's packaging. adhere to the instructions supplied in the lamp's packaging. Never touch the glass directly but use the tissue provided in the lamp's packaging. EPLACING THE LAMP arning: Remove mains power before opening the unit. REPLACING THE LAMP moveWarning: the top Remove rear cover by power loosing the 2opening screwsthe on unit. the back side of the unit panel. mains before e lamp must the be inserted on the socket passing through theoffront sidepanel. of the Remove top rear cover by lamp loosing the 2 by screws on the back side the unit The reflector lamp must be inserted on the lamp socket by passing through the front side of the uminium aluminium reflector FORCED VENTILATION ORCED VENTILATION You will note, on inspection, that the fixture features various air inlets and cooling fans located u willon note, thatofthe various air inlets and coolingbe fans located bothon theinspection, base and head thefixture fixture.features These should, under no circumstances, blocked or bothobstructed the base and head of the fixture. These should, under no circumstances, be blocked or whilst the projector is in operation. structed whilst the cause projector is in operation. Doing so could the fixture to seriously overheat thereby compromising its proper operation. ing so could cause the fixture to seriously overheat thereby compromising its proper eration. MOON ARC 1200575 8 ENG MAINS CONNECTION The projector operates at 230V 50/60 Hz (115V 60Hz on request). Prior to connecting the unit to your mains supply, ensure that the model in your possession correctly matches the mains supply available. For connection purposes, ensure that your plug is capable of supporting 8 amps at 230V. Strict adherence to regulatory norms is strongly recommended. REPLACING IRIS Warning: Remove mains power before replacing the Iris. 1 Remove the top rear cover by loosing the 2 screws on the back side of the unit panel. (Photo 1 and 2) 2 Press the Iris lock and pull up the iris sub assembly (photo 3 and 4) Iris security lock PHOTO 1 PHOTO 2 PHOTO 3 PHOTO 4 PERIODIC CLEANING Lenses and reflectors Even a fine layer of dust can reduce the luminous output substantially. Regularly clean all lenses and the reflector using a soft cotton cloth, dampened with a specialist lens cleaning solution. Fans and air passages The fans and air passages must be cleaned approximately every 6 weeks. This periodic cleaning will depend of course, on the conditions in which the projector is operating. Suitable instruments for performing this type of maintenance are a brush and a common vacuum cleaner or an air compressor. If necessary, clean the fans and air passages more frequently. PERIODIC CONTROLS Lamp The lamp should be replaced if there is any visible damage or deformation due to heat. This will help to avoid the danger of the lamp exploding. Electrical components Check all electrical components for correct earthing. Fuse replacement Locate the fuse, which protects the lamp, in the base of the MOON575. Using a multimeter, test the condition of the fuse, replacing it with one of equivalent type if necessary. 9 NOTES MOON ARC 1200575 10 NOTES MOON ARC 1200575 11 NOTES MOON ARC 1200575 The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from D.T.S. D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. D.T.S. assumes no responsibility for the use or application of the products or circuits described herein. MADE IN ITALY *0517I026* 0517I026 D.T.S. Illuminazione s.r.l - Via Fagnano Selve 10-12-14 47843 - Misano Adriatico (RN) Italy Tel. +39 0541 611131 Fax +39 0541 611111 [email protected] www.dts-lighting.it
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project