BLF6G21-10G 1. Product profile Power LDMOS transistor 1.1 General description

BLF6G21-10G 1.  Product profile Power LDMOS transistor 1.1 General description
BLF6G21-10G
Power LDMOS transistor
Rev. 4 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
10 W LDMOS power transistor for base station applications at frequencies from
HF to 2200 MHz
Table 1.
Typical performance
IDq = 100 mA; Tcase = 25 C in a common source class-AB production test circuit.
f
VDS
PL(AV)
Gp
D
ACPR
(MHz)
(V)
(W)
(dB)
(%)
(dBc)
2-carrier W-CDMA
2110 to 2170
28
0.7
18.5
15
50[1]
1-carrier W-CDMA
2110 to 2170
28
2
19.3
31
39[1]
Mode of operation
[1]
Test signal: 3GPP; test model 1; 64 DPCH; PAR = 7.5 dB at 0.01 % probability on CCDF per carrier;
carrier spacing 5 MHz.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features and benefits
 Typical 2-carrier W-CDMA performance at frequencies of 2110 MHz and 2170 MHz,
a supply voltage of 28 V and an IDq of 100 mA:
 Average output power = 0.7 W
 Gain = 18.5 dB
 Efficiency = 15 %
 ACPR = 50 dBc
 Typical 1-carrier W-CDMA performance at frequencies of 2110 MHz and 2170 MHz,
a supply voltage of 28 V and an IDq of 100 mA:
 Average output power = 2 W
 Gain = 19.3 dB
 Efficiency = 31 %
 ACPR = 39 dBc
 Easy power control
 Integrated ESD protection
 Excellent ruggedness
 High efficiency
BLF6G21-10G
Power LDMOS transistor
 Excellent thermal stability
 No internal matching for broadband operation
 Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 RF power amplifiers for GSM, PHS, EDGE, CDMA and W-CDMA base stations and
multi carrier applications in the HF to 2200 MHz frequency range
 Broadcast drivers
2. Pinning information
Table 2.
Pinning
Pin
Description
1
drain
2
gate
3
source
Simplified outline
Graphic symbol
1
1
[1]
2
3
3
sym112
2
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
BLF6G21-10G
Package
Name
Description
Version
-
ceramic surface-mounted package; 2 leads
SOT538A
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
BLF6G21-10G#4
Product data sheet
Symbol
Parameter
VDS
Conditions
Min
Max
Unit
drain-source voltage
-
65
V
VGS
gate-source voltage
0.5
+13
V
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
225
C
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 12
BLF6G21-10G
Power LDMOS transistor
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol Parameter
Conditions
Rth(j-case) thermal resistance from junction to case Tcase = 80 C; PL(AV) = 11 W
[1]
[1]
Typ
Unit
3.2
K/W
Thermal resistance is determined under specified RF operating conditions
6. Characteristics
Table 6.
Characteristics
Tj = 25 C unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
V(BR)DSS
drain-source breakdown voltage
VGS = 0 V; ID = 0.5 mA
65
-
-
V
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 18 mA
1.4
1.9
2.4
V
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
1.5
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V; VDS = 10 V
-
3.1
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
150
nA
gfs
forward transconductance
VDS = 10 V; ID = 0.9 A
-
0.5
-
S
RDS(on)
drain-source on-state resistance
VGS = VGS(th) + 3.75 V; ID = 0.625 A
-
0.4
-

Crs
feedback capacitance
VGS = 0 V; VDS = 28 V; f = 1 MHz
-
0.5
-
pF
7. Application information
Table 7.
Application information
Mode of operation: 2-carrier W-CDMA; PAR 7.5 dB at 0.01 % probability on CCDF; 3GPP
test model 1; 1-64 PDPCH; f1 = 2112.5 MHz; f2 = 2117.5 MHz; f3 = 2162.5 MHz; f4 = 2167.5 MHz;
RF performance at VDS = 28 V; IDq = 100 mA; Tcase = 25 C; unless otherwise specified; in a
class-AB production test circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL(AV) = 0.7 W
-
18.5
-
dB
D
drain efficiency
PL(AV) = 0.7 W
-
15
-
%
ACPR
adjacent channel power ratio
PL(AV) = 0.7 W
-
50
-
dBc
Table 8.
Application information
Mode of operation: 1-carrier W-CDMA; PAR 7.5 dB at 0.01 % probability on CCDF; 3GPP
test model 1; 1-64 PDPCH; f1 = 2112.5 MHz; f2 = 2167.5 MHz; RF performance at VDS = 28 V;
IDq = 100 mA; Tcase = 25 C; unless otherwise specified; in a class-AB production test circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL(AV) = 2 W
17.3
19.3
-
dB
D
drain efficiency
PL(AV) = 2 W
29
31
-
%
ACPR
adjacent channel power ratio
PL(AV) = 2 W
-
39
36
dBc
7.1 Ruggedness in class-AB operation
The BLF6G21-10G is capable of withstanding a load mismatch corresponding to
VSWR = 10 : 1 through all phases under the following conditions: VDS = 28 V;
f = 2140 MHz at PL = 10 W.
BLF6G21-10G#4
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 12
BLF6G21-10G
Power LDMOS transistor
7.2 CW
001aal120
50
RLin
(dB)
40
(1)
30
20
(2)
(3)
10
0
0
4
8
12
16
PL (W)
VDS = 28 V; IDq = 100 mA.
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
Fig 1.
CW input return loss as a function of load power; typical values
001aal121
19.5
001aal122
80
ηD
(%)
Gp
(dB)
60
(1)
(2)
(3)
18.5
40
17.5
(1)
(2)
(3)
20
16.5
0
0
4
8
12
16
0
4
8
PL (W)
VDS = 28 V; IDq = 100 mA.
(1) f = 2.11 GHz
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
(3) f = 2.17 GHz
CW power gain as a function of load power;
typical values
BLF6G21-10G#4
Product data sheet
16
PL (W)
VDS = 28 V; IDq = 100 mA.
Fig 2.
12
Fig 3.
CW drain efficiency as a function of
load power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 12
BLF6G21-10G
Power LDMOS transistor
7.3 1-carrier W-CDMA
001aal123
50
RLin
(dB)
40
(1)
30
20
(2)
(3)
10
0
0
1
2
3
4
PL (W)
VDS = 28 V; IDq = 100 mA.
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
Fig 4.
1-carrier W-CDMA input return loss as a function of load power; typical values
001aal124
20.0
001aal125
50
ηD
(%)
Gp
(dB)
19.6
40
19.2
30
(1)
(2)
(3)
18.8
(1)
(2)
(3)
20
18.4
10
18.0
0
0
1
2
3
4
0
1
2
PL (W)
VDS = 28 V; IDq = 100 mA.
(1) f = 2.11 GHz
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
(3) f = 2.17 GHz
1-carrier W-CDMA power gain as a function of
load power; typical values
BLF6G21-10G#4
Product data sheet
4
PL (W)
VDS = 28 V; IDq = 100 mA.
Fig 5.
3
Fig 6.
1-carrier W-CDMA drain efficiency as a
function of load power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 12
BLF6G21-10G
Power LDMOS transistor
001aal126
−30
001aal127
−52
ACPR
(dBc)
ACPR
(dBc)
−40
−56
(3)
(2)
(1)
−50
−60
(3)
(2)
(1)
−60
0
1
2
3
−64
4
0
1
2
PL (W)
4
PL (W)
VDS = 28 V; IDq = 100 mA; carrier spacing 5 MHz.
VDS = 28 V; IDq = 100 mA; carrier spacing 10 MHz.
(1) f = 2.11 GHz
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
(3) f = 2.17 GHz
Fig 7.
3
1-carrier W-CDMA adjacent channel power
ratio as a function of load power;
typical values
Fig 8.
1-carrier W-CDMA adjacent channel power
ratio as a function of load power;
typical values
7.4 2-carrier W-CDMA
001aal128
40
RLin
(dB)
(1)
30
20
(2)
(3)
10
0
0
0.6
1.2
1.8
PL (W)
VDS = 28 V; IDq = 100 mA.
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
Fig 9.
BLF6G21-10G#4
Product data sheet
2-carrier W-CDMA input return loss as a function of load power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 12
BLF6G21-10G
Power LDMOS transistor
001aal129
20.0
Gp
(dB)
001aal130
30
ηD
(%)
19.6
20
19.2
(1)
(2)
(3)
18.8
(1)
(2)
(3)
10
18.4
18.0
0
0
0.6
1.2
1.8
0
0.6
1.2
PL (W)
1.8
PL (W)
VDS = 28 V; IDq = 100 mA.
VDS = 28 V; IDq = 100 mA.
(1) f = 2.11 GHz
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
(3) f = 2.17 GHz
Fig 10. 2-carrier W-CDMA power gain as a function of
load power; typical values
001aal131
−30
Fig 11. 2-carrier W-CDMA drain efficiency as a
function of load power; typical values
001aal132
−40
ACPR
(dBc)
ACPR
(dBc)
−45
−40
(3)
(2)
(1)
−50
(3)
(2)
(1)
−50
−55
−60
0
0.6
1.2
1.8
−60
0
PL (W)
1.8
VDS = 28 V; IDq = 100 mA; carrier spacing 10 MHz.
(1) f = 2.11 GHz
(1) f = 2.11 GHz
(2) f = 2.14 GHz
(2) f = 2.14 GHz
(3) f = 2.17 GHz
(3) f = 2.17 GHz
Fig 12. 2-carrier W-CDMA adjacent channel power
ratio as a function of load power;
typical values
Product data sheet
1.2
PL (W)
VDS = 28 V; IDq = 100 mA; carrier spacing 5 MHz.
BLF6G21-10G#4
0.6
Fig 13. 2-carrier W-CDMA adjacent channel power
ratio as a function of load power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 12
BLF6G21-10G
Power LDMOS transistor
8. Package outline
Ceramic surface-mounted package; 2 leads
SOT538A
D
A
3
z2 (4×)
z4 (4×)
D1
D2
B
c
1
Lp
A
L
z1 (4×)
E2
H
E1
E
z3 (4×)
2
w1
b
B
α
Q
0
5 mm
2.5
scale
Dimensions (mm are the original dimensions)
Unit
A
b
c
D
D1
D2
E
E1
E2
H
L
max 2.34 1.35 0.23 5.16 4.65 5.16 4.14 3.63 4.14 7.49 2.03
nom
min 2.13 1.19 0.18 5.00 4.50 5.00 3.99 3.48 3.99 7.24 1.27
mm
Lp
Q
w1
1.02 0.1
z1
z2
z3
z4
0.58 0.25 0.97 0.51
7°
0.43 0.18 0.81 0.00
0°
0.25
0.51 0.0
θ
sot538a_po
Outline
version
References
IEC
JEDEC
JEITA
European
projection
Issue date
13-02-07
15-04-05
SOT538A
Fig 14. Package outline SOT538A
BLF6G21-10G#4
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 12
BLF6G21-10G
Power LDMOS transistor
9. Abbreviations
Table 9.
Abbreviations
Acronym
Description
3GPP
Third Generation Partnership Project
CCDF
Complementary Cumulative Distribution Function
CDMA
Code Division Multiple Access
CW
Continuous Wave
DPCH
Dedicated Physical CHannel
EDGE
Enhanced Data rates for GSM Evolution
GSM
Global System for Mobile communications
HF
High Frequency
LDMOS
Laterally Diffused Metal Oxide Semiconductor
PAR
Peak-to-Average power Ratio
PDPCH
transmission Power of the Dedicated Physical CHannel
PHS
Personal Handy-phone System
RF
Radio Frequency
VSWR
Voltage Standing Wave Ratio
W-CDMA
Wideband Code Division Multiple Access
10. Revision history
Table 10.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLF6G21-10G#4
20150901
Product data sheet
-
BLF6G21-10G v.3
Modifications:
•
The format of this document has been redesigned to comply with the new identity guidelines
of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLF6G21-10G v.3
20130411
Product data sheet
-
BLF6G21-10G v.2
BLF6G21-10G v.2
20091211
Product data sheet
-
BLF6G21-10G v.1
BLF6G21-10G v.1
20090511
Objective data sheet
-
-
BLF6G21-10G#4
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 12
BLF6G21-10G
Power LDMOS transistor
11. Legal information
11.1
Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
11.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
11.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLF6G21-10G#4
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 12
BLF6G21-10G
Power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
11.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
12. Contact information
For more information, please visit:
http://www.ampleon.com
BLF6G21-10G#4
Product data sheet
For sales office addresses, please visit:
http://www.ampleon.com/sales
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 12
BLF6G21-10G
Power LDMOS transistor
13. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
7.4
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Application information. . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 3
CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1-carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 5
2-carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 6
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contact information. . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLF6G21-10G#4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement