2279
AC / DC transmitter
2279
– Input galvanically separated from output and supply
– AC current measurement
– AC voltage measurement
– Current and voltage output
– 24 VDC supply or universally supplied
– Applicable in PELV/SELV circuits
Advanced features
• ±20% adjustment of the 0 and the 100% measurement range
is possible at the front panel.
• Input and output ranges are programmable by use of internal
DIP-switches.
Connections
Application
• AC current measurement e.g. in connection with a current
transformer or a current clamp.
• Direct AC voltage measurement.
Technical characteristics
• Analog signal conditioning with microprocessor based gain
and zero offset.
• Signals in the ranges 0.5...250 VRMS sinusoidal voltage can
be connected directly to the input, ranges are programmed
via DIP-switches and jumpers.
• Analog standard current output of 0/4...20 mA or standard
voltages of 0...1 or 0...10 VDC ranges are programmed via
DIP-switches and jumpers.
• Special currents and voltages within the signal range.
• Signal reversal e.g. 20...4 mA is possible in a special version.
• Universally supplied units have a 3-port galvanic separation
between input, supply, and output.
• Mounting for a standard 11-pole socket which can be adapted
for DIN rail or plate use with PR’s 7023 adaptor and 7024
mounting keying.
This page is automatically generated on the basis of information provided on www.prelectronics.com and affiliated websites. It is provided to you as a service and for information
purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability
Environmental Conditions
Specifications range.......................................
Calibration temperature.................................
Relative humidity............................................
Protection degree...........................................
Output specifications
-20°C to +60°C
20...28°C
< 95% RH (non-cond.)
IP50
Mechanical specifications
Dimensions (HxWxD)..................................... 80.5 x 35.5 x 84.5 mm (D is
without pins)
Weight DC / universally supplied................... 100 g / 160 g
Common specifications
Supply voltage............................................... 19.2...28.8 VDC
Supply voltage, universal............................... 21.6...253 VAC, 50...60 Hz or
19.2...300 VDC
Max. power consumption............................... ≤ 1.3 W (2279--D)
Max. power consumption............................... ≤ 2.2 W (2279--P)
Isolation voltage, test /
working........................................................... 3.75 kVAC / 250 VAC
Signal / noise ratio......................................... Min. 60 dB
Response time (0...90%)............................... < 1.5 s
Effect of supply voltage change..................... < 0.005% of span / VDC
Temperature coefficient................................. < ±0.01% of span / °C
Linearity error................................................. < ±1% of span
EMC immunity influence................................ < ±0.5% of span
Max. offset...................................................... 20% of max. value
Current output: Signal range......................... 0...5 mA / 0...20 mA
Min. signal range............................................ 4 mA / 16 mA
Load (max.).................................................... 20 mA/600 Ω/12 VDC
Load stability, current output.......................... ≤0.01% of span/100 Ω
Current limit.................................................... 23...28 mA
Voltage output through internal
shunt.............................................................. See manual for details
*of span.......................................................... = of the presently selected
range
Approvals
EMC...............................................................
LVD................................................................
PELV/SELV....................................................
GOST R.........................................................
EN 61326-1
EN 61010-1
IEC 364-4-41 and EN 60742
Yes
Input specifications
Max. offset...................................................... 50% of max. value
Current input: Measurement
range.............................................................. 0...1 ARMS / 40...400 Hz
Min. measurement range (span),
current input................................................... 500 mARMS
Input resistance, current
input............................................................... Nom. 1 Ω
Voltage input: Measurement
range.............................................................. 0...250 VRMS / 40...400 Hz
Min. measurement range (span),
voltage input................................................... 0.5 VRMS
Input resistance, voltage
input............................................................... > 1 MΩ
2279-010914
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement