Dynex | DX-32L100A13 | User guide | Dynex DX-32L100A13 User guide

Dynex DX-32L100A13 User guide
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 1 Tuesday, February 7, 2012 2:42 PM
32" LCD TV
DX-32L100A13
WE ARE GOING GREEN!
A copy of your User Guide is not provided in the box but is available
online.
Go to www.dynexproducts.com, then click Support & Service.
Enter your model number in the Product Search field,
then click Search.
You can also find additional troubleshooting information
at www.dynexproducts.com.
I M P O R TA N T I N F O R M ATI O N
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 1 Tuesday, February 7, 2012 2:42 PM
DX-32L100A13
1
f
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children climb on or play with entertainment system
furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory as suitable for your TV.
•
Follow all instructions supplied by the TV and wall mount manufacturers.
•
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
This apparatus is intended to be supported by a UL listed Wall Mount bracket.
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 2 Tuesday, February 7, 2012 2:42 PM
2
DX-32L100A13
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over. S3125A
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
The wall plug is the disconnecting device. The plug must remain readily
operable.
An apparatus with three-prong, grounding-type plug is a Class I
apparatus which needs to be grounded to prevent possible electric shock.
Make sure that you connect the Class I apparatus to a grounding-type,
three-prong outlet.
Remote control batteries should not be exposed to excessive heat such as
sunshine, fire, or the like.
The apparatus should not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, should be placed on the
apparatus.
Important Safety Instructions
WARNING
Electric shock hazard
To reduce the risk of fire or electric shock, do not remove any cover or expose
the device to rain or moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
Lightning
For added protection for your device receiver during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from
the power outlet and disconnect any antenna or cable system. This helps
prevent property damage and personal injury from lightning and power line
surges.
Power lines
An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
Handling the LCD panel
•
Your TV’s screen is made of glass. Do not drop your TV or hit, jolt, or
press hard against the LCD panel. If the screen breaks, be careful of
broken glass.
• If the LCD panel is broken, make absolutely sure that you do not touch
the liquid in the panel. This may cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle, rinse, and consult
with your doctor. Also, if the liquid gets in your eyes or touches your
skin, consult with your doctor after rinsing for at least 15 minutes or
longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service technician
uses replacement parts specified by the manufacturer that have the same
characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock, personal injury, or other hazards.
Safety check
After completing any service or repair to this device, ask the service technician
to perform routine safety checks to determine that your TV is in correct
operating condition.
Power source
Operate your TV only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult
an electrician or your local power company.
Servicing
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
CAUTION
Damage requiring service
Unplug this TV from the power outlet and refer servicing to qualified service
personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled or objects have fallen into your TV.
• If your TV has been exposed to rain or water.
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 3 Tuesday, February 7, 2012 2:42 PM
Troubleshooting
DX-32L100A13
3
If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore your TV to its normal operation.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in performance.
Outdoor antenna grounding
End of life directives
If an outside antenna or cable system is connected to your TV, make sure that
the antenna or cable system is grounded to provide some protection against
voltage surges and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct
grounding of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of
the antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
The LCD panel contains almost 3 million thin film transistors, which provide
exceptionally sharp video quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red point. These non-active
pixels do not adversely affect the performance of your TV, and are not
considered defects.
•
1
Your TV contains tin-lead solder and a fluorescent lamp containing a small
amount of mercury. Disposal of these materials may be regulated for
environmental reasons. Your TV also contains material that can be recycled
and reused. For disposal or recycling information, contact your local
authorities to find a recycler in your area.
Non-active pixels
Troubleshooting
Warning: Do not try to repair your TV yourself. Contact authorized service
personnel.
2
Problem
3
4
Remote control does not
work.
• Make sure that the power cord is correctly connected to
your TV and a power outlet.
• Make sure that there are no obstructions between the
remote control and the remote control sensor on the front
of the TV.
• Point the remote control directly at the remote control
sensor on your TV. For the location of the remote control
sensor, see “Front” in the online User Guide.
• Make sure that the batteries are installed correctly. See
“Installing remote control batteries” in the online User
Guide.
• Replace dead batteries with new batteries. See “Installing
remote control batteries” in the online User Guide.
Trouble programming your
existing universal remote
control.
• See instructions and a table of common codes in
“Programming a different universal remote control” in the
online User Guide.
• Codes are subject to change. For up-to-date codes, go to
www.dynexproducts.com/remotecodes.
• Replace dead batteries with new batteries. See “Installing
remote control batteries” in the online User Guide.
• Refer to the User Guide that accompanied your universal
remote control and contact the manufacturer if problems
persist.
No power.
• Make sure that the power cord is correctly connected to
your TV and a power outlet.
• Unplug the power cord, wait 60 seconds, then plug the
cord back in and turn on your TV.
• Other devices (for example, surround sound receiver,
external speakers, fans, or hair dryers) may be interfering
with your TV. Try turning off one device at a time to
determine which device is causing interference. After you
have determined which device is causing interference,
move it further from the TV to eliminate the interference.
“No signal” error message is
displayed.
• Press INPUT and make sure that you have selected the
correct input for the device or service you are trying to use.
• If you are using a cable or satellite box, use the remote
that came with that box to change channels.
• Make sure you have the correct input selected to view
channels from the cable or satellite box.
After Auto Channel Search,
there are no channels.
• Reception can vary by channel depending on the
broadcast power level of a given station. Contact your
cable or satellite TV provider.
• Make sure the antenna or cable/satellite TV is connected
securely to your TV.
• Try replacing the cable between the antenna/cable or
cable/satellite box and your TV.
5
7
6
1 Antenna lead-in wire
2 Grounding clamp
3 Antenna discharge unit
4 Grounding conductors
5 Ground clamps
6 Power service grounding electrode system
7 Electric service equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
guidance for correct grounding. Specifically, it states that the cable ground
must be connected to the grounding system of the building as close to the
point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings into a
warm room or if the temperature of the room rises suddenly. When this
happens, the TV's performance may be impaired. To prevent this, let the TV
stand in its new surroundings for about an hour before switching it on, or
make sure that the room temperature rises gradually.
Condensation may also form during the summer if the TV is exposed to the
breeze from an air conditioner. In such cases, change the location of the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating problems, or
even damage, keep your cordless and cellular telephones away from the TV.
Solution
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 4 Tuesday, February 7, 2012 2:42 PM
4
DX-32L100A13
Problem
Specifications
DX-32L100A13
Solution
One or more channels do
not display.
• Make sure that the channels are not blocked. See “Setting
parental control levels.”
• Make sure that the channels are not hidden. The channel
may have been deleted from the channel list. You can tune
to the channel by pressing the number buttons or you can
add the channel back to the channel list. See “Hiding
channels” in the online User Guide.
• If you are using a cable or satellite box, use the remote
that came with that box to change channels.
• Make sure you have the correct input selected to view
channels from the cable or satellite box.
• If you are using an antenna, the digital channel signal may
be low. To check the digital channel signal strength, see
“Checking the digital signal strength” in the online User
Guide.
Password is lost.
• Enter 9999 to access parental controls, then set a new
password. See “Setting or changing the password” in the
online User Guide.
Some settings cannot be
accessed.
• If a setting is grayed, the setting is not available in the
current video input mode.
TV cabinet creaks.
• When the TV is in use, the temperature rises naturally and
may cause the cabinet to expand or contract which can
cause a creaking noise. This is not a malfunction.
Control buttons do not
work.
TV keeps turning off.
• Make sure that the Button Lock option is set to Off. See
“Locking control buttons” in the online User Guide.
• Unplug the power cord, wait a few seconds, then plug the
cord back in and turn on your TV.
Comb filter
Response time
Horizontal viewing angle
Vertical viewing angle
3d y/c digital
8 ms
160
160
Display resolutions/VGA scan rates
DX-32L100A13
HDMI 1.3
Component video
PC/VGA
Suggested Resolutions:
1080p, 1080i, 720p,
480p, 480i
Suggested Resolutions:
1080i, 720p, 480p, 480i
Suggested scan rates:
640 × 480/60Hz,
800 × 600/60Hz,
1024 × 768/60Hz,
1360 × 768/60Hz
Tuner
DX-32L100A13
Analog
Digital
NTSC
ATSC, 8-VSB, Clear-QAM
Inputs
DX-32L100A13
HDMI/DVI
• Make sure that the sleep timer is not turned on. See
“Setting the sleep timer” in the online User Guide.
Component video
Composite video
Shared audio (component
and composite)
S-Video
PC/VGA
3.5mm PC audio input
USB
Notes:
• If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
• Additional troubleshooting information is in your online User Guide.
Go to www.dynexproducts.com, click Support & Service, enter your
model number in the Product Search field, then click Search.
Specifications
Specifications are subject to change without notice.
Dimensions and weight
No
1 (side)
1 (side)
1 (side)
Supports JPEG and
firmware upgrade
Outputs
DX-32L100A13
Video
Analog audio
Digital audio
WiFi
Ethernet
Headphone
DX-32L100A13
Without stand:
31.0 x 4.4 x 19.5 in. (78.65 x 11.09 x 49.55 cm)
18.01 lbs. (8.2 kg)
With stand:
31.0 x 9.1 x 21.5 in. (78.65 x 23.18 x 54.65 cm)
19.41 lbs. (8.6 kg)
3 (side)
E-EDID compliant
HDCP compliant
DVI to HDMI1 only
1 (side)
1 (side)
No
No
1 (side)
1 Coaxial (side)
No
No
1 (side)
Audio
Screen
DX-32L100A13
Watts/Channel
Number of Speakers
DX-32L100A13
Screen size measured diagonally
Display type
Panel 60 Hz vs.120 Hz
Display resolution
Panel resolution
Aspect ratio
Contrast ratio (typical)–panel
Dynamic contrast ratio–list value
Brightness (center typical) cd/m2
31.5"
LCD
60Hz
720p
1366 (H) × 768 (V)
16:9
3000:1
6000:1
300 nits
6W
2
Power
DX-32L100A13
Power consumption
Power input
On: 90 W
Standby: <1 W
120V/60Hz
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 5 Tuesday, February 7, 2012 2:42 PM
Legal notices
DX-32L100A13
Miscellaneous
DX-32L100A13
OSD languages
INlink
Game Mode
ENERGY STAR qualified
Internet connectable
TV base screws
V-Chip (version 2.0)
Sleep timer
Channel labeling
VESA mount (mm)
(horizontal × vertical)
English, French, Spanish
No
No
No
No
M4 type (16 mm length)
(6 pcs)
Yes
Yes
No
200 × 200
Note: The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the wall-mount
bracket for screw lengths.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance with
the FCC Rules could void the user’s authority to operate this equipment.
Cables
Connections to this device must be made with shielded cables with metallic RF/EMI connector
hoods to maintain compliance with FCC Rules and Regulations.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Standard Television Receiving Apparatus — Appareil de réception télévision ordinaire, Canada
BETS-7 / NTMR-7
HDMI
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LCC.
Dolby Laboratories
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
5
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 6 Tuesday, February 7, 2012 2:42 PM
6
DX-32L100A13
One-year limited warranty Dynex Televisions
Definitions:
Dynex Products ("Dynex") warrants to you, the original purchaser of this new Dynex-branded
television ("Product"), that the Product shall be free of defects in the original manufacturer of
the material or workmanship for a period of one (1) year from the date of your purchase of the
Product ("Warranty Period"). For this warranty to apply, your Product must be purchased in the
United States or Canada from a Best Buy or Future Shop authorized dealer of Dynex brand
products only that are packaged with this warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your
purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the
Product is determined to be defective by an authorized Dynex repair center or store personnel,
Dynex will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the
Product at no charge with new or rebuilt comparable products or parts. Products and parts
replaced under this warranty become the property of Dynex and are not returned to you. If
service of Products or parts are required after the Warranty Period expires, you must pay all
labor and parts charges. This warranty lasts as long as you own your Dynex Product during the
Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail store location and your
television Product has a screen size of less than 42 inches, please take your original receipt and
the Product to any Best Buy or Future Shop store. Make sure that you place the Product in its
original packaging or packaging that provides the same amount of protection as the original
packaging. If you purchased the Product from a Best Buy or Future Shop online web site, mail
your original receipt and the Product to the address listed on the web site. Make sure that you
put the Product in its original packaging or packaging that provides the same amount of
protection as the original packaging.
To obtain in-home warranty service for a television with a screen 42 inches or larger, in the
United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call
1-800-663-2275. Call agents will diagnose and correct the issue over the phone or will have an
Insignia-approved repair technician dispatched to your home.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy or Future Shop branded
retail stores or websites to the original purchaser of the product in the county where the original
purchase was made.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as power surges
• Accident(s)
• Misuse
• Abuse
• Negligence
• Commercial purposes/use, including but not limited to use in a place of business or in
communal areas of a multiple dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.
• Modification of any part of the Product, including the antenna
• Plasma display panel damaged by static (non-moving) images applied for lengthy
periods (burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Dynex to service the Product
• Products sold "as is" or "with all faults"
• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
One-year limited warranty - Dynex Televisions
•
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an
area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures
throughout the display. (Pixel based displays may contain a limited number of pixels
that may not function normally.)
• Failures or Damage caused by any contact including but not limited to liquids, gels or
pastes.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR
BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR
LOST PROFITS. DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO
THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Dynex:
For customer service please call 1-800-305-2204
www.dynexproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2012 BBY Solutions, Inc.
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All
other products and brand names are trademarks of their respective owners.
DX-32L100A13_IMP INFO_11-1404_V1_EN.book Page 1 Tuesday, February 7, 2012 2:42 PM
www.dynexproducts.com
US and Canada Market - (800) 305-2204
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.
© 2012 BBY Solutions, Inc. All rights reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and
brand names are trademarks of their respective owners.
11-1404
ENGLISH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising