CyberPower PR6000ELCDRTXL5U User`s manual
User’s Manual
BATTERY PACK (BPL48V75ART2U)
CyberPower Systems (USA), Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Phone: (952) 403-9500
Toll-free: (877) 297-6937
www.CPSww.com
K01-0000152-01
Content
INTRODUCTION ........................................................................... 2
OVERVIEW ................................................................................... 2
UNPACKING .................................................................................. 2
FEATURES INCLUDE ....................................................................... 2
BASIC OPERATION ..................................................................... 3
SAFETY PRECAUTIONS .................................................................. 3
TOWER MOUNTING WITH BATTERY PACK .............................. 4
ELECTRICAL INSTALLATION GUIDE ......................................... 5
TROUBLE SHOOTING ................................................................. 6
TECHNICAL SPECIFICATIONS ................................................... 6
CUSTOMER SERVICE ................................................................. 7
PRODUCT REGISTRATION ......................................................... 7
LIMITED WARRANTY AND CONNECTED EQUIPMENT
GUARNTEE .................................................................................. 7
CONFORMANCE APPROVALS ................................................. 10
1
Copyright © 2012 CyberPower Systems, Inc.
Introduction
Overview:
The CyberPower external battery pack (BPL48V75ART2U) supports 75A polarized plugs, and
is designed for variety of CyberPower UPS systems. When combining with the UPS, the
battery pack provides extended runtime with a 48V DC external connection. Additional
parallel-connected battery packs provides the UPS for a longer extended runtime operation.
INPUT: 48V
FUSE
Push To
RESET
AC INPUT
(Charge Only)
AC OUTPUT
Unpacking:
(2) Rack mount brackets, (2) Skids, (2) Expansion pieces for mounting stabilizers (plastic
stands for PR3000LCDRTXL2U/ PR3000ELCDRTXL2U UPS), (2) Metal plates to fasten 5U
UPS, (2) Power cords, (1) Register card, (1) User’s manual
Features include:


Form Factor- 2U/ 5U configuration supports both rack and tower mounting.
Metal Housing- Rigid metal construction provides greater durability and safety.
INPUT: 48V
4
FUSE
Push To
RESET
AC INPUT
(Charge Only)
AC OUTPUT
6
3
2
1
1. On-board user-replaceable fuse cover- User replaceable fuse is easily accessed
from the rear panel.
2. Additional Battery Pack connector sockets
3. Connector plug for additional Battery Packs
4. AC Circuit Protection- Resettable circuit breaker that provides AC output overload
protection.
5. AC Input Inlet- AC power connectivity to wall receptacle.
6. AC Output Outlet- This outlet connects to the AC Input Inlet of additional battery
packs.
2
Copyright © 2012 CyberPower Systems, Inc.
Basic Operation
Safety Precautions
CAUTION! Before connecting the Battery Pack(s) to the UPS, completely turn off and unplug
the main UPS from the wall receptacle.
CAUTION! Do not disconnect the any Battery Packs when the UPS is turned on or plugged
into a wall receptacle.
CAUTION! Do not connect the battery pack into itself.
Installation Guide
The battery pack is supplied with rack mounting rails, mounting ears, and all the hardware.
Follow the below steps to complete the installation.
1. Attach the two Rack mount ears to Battery
Pack using the provided screws.
2. Slide the UPS into the rack system.
3. Use screws to affix the mounting ears to
the rack.
Install unit in a different rack
1. Change the direction of the Rack mount
ears and attach to Battery Pack at
different location.
2. Use screws to affix the mounting ears to
the rack.
3
Copyright © 2012 CyberPower Systems, Inc.
Tower Mounting with Battery Pack
Installation of Two types of stands
UPS models: PR3000LCDRTXL2U/PR3000ELCDRTXL2U with plastic stands
2
3
The vertical/tower installation procedures are stated below:
4
1. Stand the UPS and the battery
pack.
2. Adjust the distance of stands
to fix the UPS and the battery
pack.
3. Insert the dust covers into the
rack mount ear screw holes
that are not being used.
UPS models: PR5000LCDRTXL5U/ PR6000LCDRTXL5U/ PR5000ELCDRTXL5U/
PR6000ELCDRTXL5U with metal stands
2
1.
2.
3.
4.
4
Stand the UPS and the battery pack(s).
Mounting two stabilizer brackets (supplied) to outside of UPS and battery pack(s).
Secure two metal plates (supplied) to the 5U UPS and battery packs(s) using the screws.
Insert the dust covers into the rack mount ear screw holes that are not being used.
3
4
Copyright © 2012 CyberPower Systems, Inc.
Electrical Installation Guide
CAUTION: It is necessary to put two plugs into the corresponding sockets to avoid the fire
risk of over-current.
Step 1:
Connect the Battery Pack to the UPS.
One Battery Pack
Multiple Battery Packs
Step 2: Connect the Battery Pack to wall power and connect the AC Input Inlet to the other
battery pack’s AC Output Outlet.
*For battery run time table information, visit www.CPSww.com or contact 877-297-6937.
5
Copyright © 2012 CyberPower Systems, Inc.
Trouble Shooting
Problem
Possible Cause
Solution
The UPS LCD does not
perform expected runtime.
Do not set the UPS to
recognize the battery pack(s).
By pressing the display toggle to select
functions. Then, set up the correct battery
pack numbers. The default setting is 0.
Batteries
charged.
Allow the battery pack to charge for 24
hours. Do not expect full runtime during this
initial charge period.
Specified battery pack models can use AC
to shorten charge time.
The battery pack does not
work.
are
not
fully
The status of circuit breaker
is off.
Switch on the circuit breaker.
The fuse blew.
Contact CyberPower Systems.
Open the cover on the rear panel and
replace the new fuse.
Technical Specifications
Model
BPL48V75ART2U
AC Input Voltage
100-240V
DC Input Voltage
48V
Amperage
120A
Physical
Dimensions (in)
2U Rack, 17”x23.6”x3.5”
Weight (lbs)
96
AC Connections
AC Inlet type
IEC C14
AC Outlet type
IEC C13
Overload Protection
AC output circuit breaker
Battery
Sealed Maintenance Free Lead Acid Battery
12V/9.0AHX12
Interface
PP75
Recharge Time
Typically 5 hours
Built-in Charger
Yes
Environmental
Operating Temperature
32℉ to104℉ (0℃ to 40℃)
Operating Relative Humidity
0 to 95%
Safety Approvals
Certifications
FCC Class A certified, cUL, UL1778, CE
RoHS
RoHS Compliant
Warranty
3 year limited warranty, Free Tech Support
6
Copyright © 2012 CyberPower Systems, Inc.
Customer Service
If the battery pack requests further service, please refer to the following information:
1. Call us at (877) 297-6937 or write to us at CyberPower Systems (USA), Inc., 4241 12th Ave.
E., STE 400, Shakopee, MN 55379 or send us an e-mail message at saless@cpsww.com for
instructions.
2. When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of
Connected Equipment. Have information on all applicable insurance or other resources of
recovery/payment that are available to the Initial Customer and Request a Claim Number.
3. You must provide a dated Proof-of-Purchase receipt (or other proof of the original purchase)
and provide a description of the defect.
4. Pack and ship the product to CyberPower and, if requested, the item(s) of Connected
Equipment, a repair cost estimate for the damage to the Connected Equipment, and all claim
forms that CyberPower provides to you. Show the Claim Number on the shipping label or
include it with the product.
You must prepay all shipping costs, you are responsible for packaging and shipment,
and you must pay the cost of the repair estimate.
Product Registration
CyberPower requests that you complete and return the Warranty Registration Card enclosed
with the Product or register the Product at its website (www.cpsww.com) to establish that you
are the Initial Customer of the Product, and therefore entitled coverage under the Limited
Warranty and the Connected Equipment Guarantee. (Registration is not required for coverage,
but note: if you do not register your purchase, you will be required to provide proof of
purchase.)
LIMITED WARRANTY AND CONNECTED EQUIPMENT
GUARNTEE
Read the following terms and conditions carefully before using the CyberPower
BPL48V75ART2U (the "Product"). By using the Product you consent to be bound by and
become a party to the terms and conditions of this Limited Warranty and Connected
Equipment Guarantee (together referred to as this "Warranty"). If you do not agree to the terms
and conditions of this Warranty, you should return the Product for a full refund prior to using it.
Who Is Providing This Warranty?
CyberPower Systems (USA), Inc. ("CyberPower") provides this Limited Warranty.
What Does This Warranty Cover?
This warranty covers defects in materials and workmanship in the Product under normal use
and conditions. It also covers equipment that was connected to the Product and damaged
because of the failure of the Product.
What Is The Period of Coverage?
This warranty covers the Product for three years and connected equipment for as long as you
own the Product.
Who Is Covered?
This warranty only covers the original purchaser.
transfer the Product.
Coverage ends if you sell or otherwise
7
Copyright © 2012 CyberPower Systems, Inc.
How Do You Get Service?
1. Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave.
E., STE 400, Shakopee, MN 55379 or send us an e-mail message at claims@cpsww.com for
instructions.
2. When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of
Connected Equipment. Have information on all applicable insurance or other resources of
recovery/payment that are available to the Initial Customer and Request a Claim Number.
3. You must provide a dated Proof-of-Purchase receipt (or other proof of the original purchase)
and provide a description of the defect.
4. Pack and ship the product with a dated Proof- of-Purchase receipt to CyberPower and, if
requested, the item(s) of Connected Equipment, a repair cost estimate for the damage to the
Connected Equipment, and all claim forms that CyberPower provides to you. Show the Claim
Number on the shipping label or include it with the product. You must prepay all shipping costs,
you are responsible for packaging and shipment, and you must pay the cost of the repair
estimate.
How Long Do I Have To Make A Claim?
All claims must be made within ten days of the occurrence.
What Will We Do To Correct Problems?
CyberPower will inspect and examine the Product.
If the Product is defective in material or workmanship, CyberPower will repair or replace it at
CyberPower's expense, or, if CyberPower is unable to or decides not to repair or replace the
Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase
price you paid for the Product (purchase receipt showing price paid is required).
If it appears that our Product failed to protect any equipment plugged into it, we will also send
you forms for making your claim for the connected equipment. We will repair or replace the
equipment that was damaged because of the failure of our Product or pay you the fair market
value (NOT REPLACEMENT COST) of the equipment at of the time of the damage. We will
use Orion Blue Book, or another a third-party valuation guide, or eBay, craigslist, or other
source to establish that amount. Our maximum liability is limited to $400,000 for
BPL48V75ART2U.
Who Pays For Shipping?
We pay when we send items to you; you pay when you send items to us.
What Are Some Things This Warranty Does Not Cover?
1. This Warranty does not cover any software that was damaged or needs to be replaced due
to the failure of the Product or any data that is lost as a result of the failure or the restoration of
data or records, or the reinstallation of software.
2. This Warranty does not cover or apply to: misuse, modification, operation or storage outside
environmental limits of the Product or the equipment connected to it, nor for damage while in
transit or in storage, nor if there has been improper operation or maintenance, or use with
items not designed or intended for use with the Product, such as laser printers, appliances,
aquariums, medical or life support devices, etc.
What Other Limitations Apply?
1. This Warranty does not apply unless the Product and the equipment that was connected to
it were connected to properly wired and grounded outlets (including compliance with electrical
and safety codes of the most current electrical code), without the use of any adapters or other
connectors.
2. The Product must have been plugged directly into the power source and the equipment
connected to the Product must be directly connected to the Product and not "daisy-chained"
together in serial fashion with any extension cords, another Product or device similar to the
Product, surge suppressor, or power tap. Any such installation voids the Limited Warranty.
3. The Product and equipment connected to it must have been used properly in a suitable and
proper environment and in conformance with any license, instruction manual, or warnings
provided with the Product and the equipment connected to it.
4. The Product must have been used at all times within the limitations on the Product's VA
8
Copyright © 2012 CyberPower Systems, Inc.
capacity.
What Are the Limitations?
The sole and exclusive remedies of the Initial Customer are those provided by this Warranty.
The Product was designed to eliminate disrupting and damaging effects of momentary (less
than 1ms) voltage spikes or impulses from lightning or other power transients. If it can be
shown that a voltage spike lasting longer than 1ms has occurred, the occurrence will be
deemed outside the rated capabilities of the Product and the Limited Warranty is void.
CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following:
1. Loss of or damage to data, records, or software or the restoration of data or records, or the
reinstallation of software.
2. Damage from causes other than AC Power Line Transients, spikes, or surges on properly
installed, grounded and code-compliant 120 volt power lines in the United States and Canada;
transients, surges or spikes on standard telephone land lines, PBX telephone equipment lines
or Base 10T Ethernet lines, when properly installed and connected. (This exclusion applies, for
example, to fluctuations in data transmission or reception, by CATV or RF transmission or
fluctuations, or by transients in such transmission.)
3. Damage from any circumstance described as excluded above with respect to the Product.
4. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, abuse,
misuse or alteration of either the product or the Connected Equipment.
5. CyberPower excludes any liability for personal injury under the Limited Warranty and
Connected Equipment Guarantee. CyberPower excludes any liability for direct, indirect,
special, incidental or consequential damages, whether for damage to or loss of property
[EXCEPT FOR (AND ONLY FOR) the specific limited agreement of CyberPower to provide
certain warranty benefits regarding "Connected Equipment" under this Warranty], loss of
profits, business interruption, or loss of information or data. NOTE: Some States or Provinces
do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply to you.
6. The Product is not for use in high-risk activities or with aquariums. The Product is not
designed or intended for use in hazardous environments requiring fail-safe performance, or for
use in any circumstance in which the failure of the Product could lead directly to death,
personal injury, or severe physical or property damage, or that would affect operation or safety
of any medical or life support device (collectively, "High Risk Activities"). CyberPower
expressly disclaims any express or implied warranty of fitness for High Risk Activities or with
aquariums. CyberPower does not authorize use of any Product in any High Risk Activities or
with Aquariums. ANY SUCH USE IS IMPROPER AND IS A MISUSE OF THE PRODUCT.
What Is the Fine Print?
The application of the United Nations Convention of Contracts for the International Sale of
Goods is expressly excluded.
CyberPower is the warrantor under this Limited Warranty.
For further information please feel free to contact CyberPower at CyberPower Systems (USA),
Inc. 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us at (877) 297-6937; or send us
an e-mail message at claims@cpsww.com.
9
Copyright © 2012 CyberPower Systems, Inc.
Conformance Approvals
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference that may cause undesired
operation.
WARNING!! This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense. Shielded signal cables must be used with this product to
ensure compliance with the
Class A FCC limits.
The Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
Cet appareil numerique de la class A respecte toutes les exigencies du Reglement sur le
materiel brouilleur du Canada.
This document is believed to be accurate, but CyberPower reserves the right to change or
correct the contents and does not assume any responsibility for omissions or errors.
Need Additional Help?
Feel free to contact our Tech Support department with installation, troubleshooting, or general
product questions.
CyberPower Technical Support
Phone: 1-952-403-9500 Toll-free: 1-877-297-6937
Email: tech@cpsww.com
Web: www.CPSww.com
Mail: 4241 12th Avenue E, Suite 400 Shakopee, MN 55379
Entire contents copyright © 2012 CyberPower Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.
10
Copyright © 2012 CyberPower Systems, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising