Radio Shack | ET-1118 | Owner`s manual | Radio Shack ET-1118 Owner`s manual

Radio Shack ET-1118 Owner`s manual
$KI"$WVVQP"2JQPG
YKVJ"%CNNGT"+&
43-3901
%106'065
FCC Statement .......................... 2
Lightning ................................. 3
Preparation ................................. 3
Installing Batteries ................... 3
Selecting a Location ................ 4
Mounting the Phone ................ 4
On a Desktop........................ 4
On a Wall Plate or Wall......... 4
Connecting the Handset ......... 5
Setting Up the Phone .............. 5
Setting the Ringer ................... 6
Setting the Dialing Mode ......... 6
Using Tone Services ............... 7
Operation ................................... 7
Dialing a Call ........................... 7
Receiving a Call ...................... 7
Timer ....................................... 7
Adjusting the Handset
Volume .................................... 7
Using Mute .............................. 8
Using Flash ............................. 8
Using Redial ............................ 8
Using Pause ............................ 8
Storing a Number
in Memory ............................... 8
Copying a Number from the
Caller ID into Memory ............. 9
Dialing a Stored Number ......... 9
Caller Id Operation ..................... 9
Reviewing Call Records .......... 9
Call Back from Caller ID
Memory ................................. 10
Deleting Call Records ............ 11
Care ......................................... 12
Service and Repair ................... 12
OWNER’S MANUAL — Please read before using this equipment.
Large Liquid Crystal Display – Displays three lines of
information, including the time, the number you dialed, and
Caller ID information (see “Caller Id Operation” on Page 9).
New Call Indicator
Big Button Keypad —
Provides easy button
recognition.
Three Emergency Icons — Lets you
dial emergency service numbers with
the touch of a button (see “Storing a
Number in Memory” on Page 8 and
“Dialing a Stored Number” on Page 9).
Thank you for purchasing the RadioShack Big Button
Phone with Caller ID. Your phone offers the latest in
telephone technology, letting you store telephone numbers
in memory to make dialing frequently called numbers quick
and easy. It displays a caller’s phone number (and name, if
available in your area), the current date and time, and call
information as provided by your local phone company to
Caller ID and message waiting service subscribers. In
addition, the Caller ID memory stores and displays up to 64
incoming phone records.
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
#"+/2146#06"#
If an icon appears at the end of a
paragraph, go to the box on that
page with the corresponding icon
for pertinent information.
Rý— Warning
. — Caution
# — Important
± — Note
(%%"56#6'/'06
This phone is Hearing Aid compatible.
Your phone complies with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the
REN to your telephone company. Both numbers are on the
bottom of the phone.
You must not connect your phone to:
• coin-operated systems
• party-line systems
• most electronic key telephone systems
We have designed your phone to conform to federal
regulations, and you can connect it to most telephone lines.
However, each phone and each device, such as a
telephone or answering machine that you connect to the
telephone line draws power from the telephone line. We
refer to this power draw as the device's ringer equivalence
number, or REN on the bottom of your phone.
If you use more than one phone or other device on the line,
add up all of the RENs. If the total is more than five (three in
rural areas), your telephones might not ring. If ringer
operation is impaired, remove a device from the line.
In the unlikely event that your phone causes problems on
the phone line, the phone company can temporarily
discontinue your service. If this happens, the phone
company attempts to notify you in advance. If advance
notice is not practical, the phone company notifies you as
soon as possible and advises you of your right to file a
complaint with the FCC.
Also, the phone company can make changes to its lines,
equipment, operations, or procedures that could affect the
operation of this telephone. The telephone company notifies
you of these changes in advance, so you can take the
necessary steps to prevent interruption of your telephone
service.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
2
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
.+)*60+0)
Your telephone has built-in protection circuits to reduce the
risk of damage from surges in telephone line and power line
current. These protection circuits meet or exceed the FCC
requirements. However, lightning striking the telephone or
power lines can damage your telephone.
Lightning damage is not common. Nevertheless, if you live
in an area that has severe electrical storms, we suggest that
you unplug your phone when storms approach to reduce the
possibility of damage.
24'2#4#6+10
+056#..+0)"$#66'4+'5
Your phone requires four AA batteries (not supplied) for
power. For the best performance and longest life, we
recommend RadioShack alkaline batteries..
."%#76+10".
1. Use a flat-blade screwdriver to lift the battery
compartment door.
•
Use only fresh batteries of the
required size and
recommended type.
2. Insert four AA batteries into the compartment as
indicated by the polarity symbols.
•
If you do not plan to use the
phone for two weeks or longer,
remove the batteries. Batteries
can leak chemicals that can
destroy electronic parts.
3. Snap the battery compartment door back into place.
When ùappears on the display or the display dims,
replace the batteries. During replacement of the batteries,
keep the phone line between the phone and wall outlet
3
R
plugged in to maintain the Caller ID and speed dialing
memories.
R
"9#40+0)ý
"
Dispose of old batteries promptly
and properly. Do not burn or bury
them.
If you do not replace the batteries promptly, your Caller ID
and telephone memory information may be lost.
Rý
5'.'%6+0)"#".1%#6+10
Select a location for your telephone that is:
• Near a telephone jack
• Not in the way of normal activities in the area
±"016'"±"
The USOC number of the jack to
be installed is RJ11C (or RJ 11W
for a wall plate jack).
Your telephone connects directly to a modular telephone
line jack. If your telephone wiring does not have a modular
jack, you can update the wiring yourself using jacks and
adapters (available at your local RadioShack store), or have
the telephone company update the wiring for you. You must
use compatible modular jacks that are compliant with Part
68 of FCC Rules.±
/1706+0)"6*'"2*10'
You can mount your telephone on a wall plate, directly on a
wall, or place it on a shelf, desk or table.
1P"C"&GUMVQR
1. Plug one end of the supplied long modular cord into the
LINE jack at the back of the base.
2. Plug the cord’s other end into a modular phone line
jack.
3. Place the phone on a shelf, desk, or table near enough
to the modular phone line jack so that there is no strain
on the cord.
1P"C"9CNN"2NCVG"QT"9CNN
1. Press and lift out the handset holder. Rotate it 180°,
and snap it into place so it will hold the handset in place
when the phone is mounted on the wall.
2. Insert the mounting bracket’s two tabs into the
matching slots opposite the keyhole slot on the
underside phone’s base. Then press down and slide
the bracket upward until the tabs snap into place.
3. Plug one end of the supplied short modular cord into
the LINE jack at the back of the base.
4
4. Plug the cord’s other end into the wall plate jack, then
align the base’s keyhole slots with the wall plate studs
and slide the phone downward to secure it.
Keyhole Slots
Wall Plate Studs
Mounting Bracket
To mount the phone directly on a wall, in addition to the
preceding steps, you need two screws (not supplied) with
heads that fit into the keyhole slot on the bottom of the base.
1. Drill two holes 83mm apart (vertically). Then thread a
screw into each hole, letting the heads extend about
5mm from the wall.
2. Substitute the long modular cord for the short cord.
%100'%6+0)"6*'"*#0&5'6
Plug one end of the supplied coiled cord into the handset’s
modular jack. Then connect it to the jack on the left side of
the telephone base.±
5'66+0)"72"6*'"2*10'
1. Press and hold both UP and DOWN for about four
seconds until ;DJ;HýB7D=K7=; displays, then ;D=ý;IFý<H7
appear. ;D= flashes.
±"016'"±"
Your local RadioShack store sells a
variety of longer coiled handset
cords, which are especially useful
when you mount the phone on a
wall.
2. Press UP or DOWN to select the desired language,
press DELETE to confirm. B9:ý9EDJH7IJ, ', (, ), * and +
are displayed. ) flashes.
3. Press UP or DOWN to select the contrast level (from ' –
+), press DELETE to confirm. ;DJ;Hý7H;7ý9E:;,
and UýUýU appears. The first U flashes.
5
4. Press UP or DOWN to select the first digit of the area
code. Press DELETE to confirm the selection. The
second U flashes.
5. Repeat steps 1 through 4 to set the second and the
third digit. Once you have confirmed the third digit of
the area code, ;DJ;HýJ?C;ý:7J; appears, and the hour
digit flashes.
6. Press UP or DOWN to select the desired hour. FC
appears for a PM hour.
7. Press DELETE to confirm.
8. Repeat steps 6 and 7 to set the minutes, month and
date.
5'66+0)"6*'"4+0)'4
TONE/PULSE
HANDSET VOL — Receiver Volume
RINGER VOLUME
If you do not want to hear the phone ring, set RINGER to
OFF. You can still make calls with the ringer off, and you can
answer calls if you hear another phone on the same phone
line ring. The NEW CALL indicator flashes when the phone
rings, even when the ringer is off. If you want to hear the
phone ring, set RINGER to HI or LO.
5'66+0)"6*'"&+#.+0)"/1&'
Set the TONE/PULSE switch on the side of the phone for the
type of service you have. If you are not sure which type you
have, do this simple test.
1. Set TONE/PULSE to TONE. Lift the handset and listen
for a dial tone.
2. Press any number except 0. If your phone requires that
you dial an access code (9, for example) before you
dial an outside number, do not press the access code
number either.
• If the dial tone stops, you have touch-tone service.
Leave the setting to TONE.
6
• If the dial tone continues, you have pulse service. Set
TONE/PULSE to PULSE.
75+0)"610'"5'48+%'5
Some computer services, such as alternate long distance
and bank-by-phone, require tone signals for
communications. If you have pulse service, you can still use
tone service.
1. Connect to the special service using pulse dialing.
2. When the special service answers, press * to
temporarily switch to tone dialing.
3. When you complete the call and hang up the handset,
the unit automatically returns to pulse service.
12'4#6+10
&+#.+0)"#"%#..
1. Pick up the handset and wait for a dial tone.
2. Press the keypad for the number you wish to dial. The
number dialed appears on the display. ±
When you complete your call, hang up the handset. After a
few seconds the number disappears, and the display
returns to normal.
±"016'"±"
Dialing a Call
If you dial a number over 16 digits,
only the last 14 digits appear on the
display.
4'%'+8+0)"#"%#..
Receiving a Call
When you receive a call, the phone rings and the NEW
CALL indicator flashes. 97BBç and the caller’s phone
number appears on the display (if you subscribe to a Caller
ID service from your phone company).±
Timer
The NEW CALL indicator
continues to flash until you have
reviewed all calls.
•
If you lift the handset and don’t
dial any number, the timer will
appear and start to count after
10 seconds.
•
When the off-hook time extends
beyond an hour the timer counts
up to +/0+/, returns to &&0&&, and
continues counting.
To answer the call, pick up the handset.
6+/'4
This unit is designed with a clock-timer to count the off-hook
time in seconds, up to one hour. The timer appears in the
display and starts to count up when you dial any number or
answer incoming calls.±
#&,756+0)"6*'"*#0&5'6"81.7/'
To adjust the handset volume before or during a call, set
HANDSET VOL to NOR or HI for a comfortable listening level.
7
75+0)"/76'
To talk to someone on your end of the phone without the
caller hearing your conversation, hold down MUTE. Release
MUTE to resume your conversation.
75+0)"(.#5*
FLASH performs the electronic equivalent of a switchhook
operation for special services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to
answer an incoming call without disconnecting the current
call. Press FLASH again to return to the first call.±
±"016'"±"
Using Flash
If you do not have any special
phone services, pressing FLASH
might disconnect the current call.
Using Redial
The redial memory holds up to 32
digits, so you can redial long
distance as well as local phone
numbers.
75+0)"4'&+#.
Pick up the handset, press REDIAL/PAUSE when you hear a
dial tone. The number scrolls across the display, and the
phone dials it.±
75+0)"2#75'
In some telephone systems, you must dial an access code
(9, for example) and wait for a second dial tone before
dialing an outside number. When you manually dial a
number, or when you store a number in memory, you can
have your telephone pause anywhere during the dialing
sequence. Simply press REDIAL/PAUSE at the desired
location.
When you redial or memory dial a number, the telephone
pauses for about 4 seconds at the pause entry. For longer
pauses, press REDIAL/PAUSE again.
5614+0)"#"07/$'4"+0"/'/14;
The telephone can store up to 13 phone numbers in
memory (3 emergency numbers, and 10 standard memory
numbers).
1. Lift the handset.
2. Press STORE, IJEH; appears on the display.
3. Enter the number to be stored. The number appears on
the display.
4. Press STORE again. IJEH; and C;Cýappear on the
display
5. Enter the desired memory location for the number. To
store the number in an emergency memory location,
8
press an emergency memory icon (see the illustration
on page 1). To store the number in a standard memory
location, press a number key (0-9).
%12;+0)"#"07/$'4"(41/"6*'"%#..'4"
+&"+061"/'/14;
1. Lift the handset.
2. Press Up or DOWN until the desired number appears.
3. Press STORE twice. IJEH; and C;C appear on the
display.
4. Press a memory location (0 to 9 on the keypad) to store
the number in standard memory, or press any one of
the three direct memory keys (emergency memory
icons) to store the number in that priority memory
location.
&+#.+0)"#"5614'&"07/$'4
1. Lift the handset.
2. To dial a number stored in an emergency memory
location, press that emergency icon. If you are dialing a
number stored in a standard memory location, press
MEM, then press the desired memory key (0 – 9).
%#..'4"+&"12'4#6+10
If you subscribe to a Caller ID service, the phone
automatically displays information about calls you receive
and stores the information in Call ID memory. The system
can store up to 64 incoming phone numbers and incoming
names into call records.
During an incoming call, the phone company automatically
sends the correct time between the first and second rings to
update your system’s display (if you subscribe to Caller ID
service).
4'8+'9+0)"%#.."4'%14&5
Repeatedly press UP or DOWN to review the new calls, once
the new calls have been reviewed, ;D:ýE<ýD;Mý97BB appears.
To review all the records from oldest to newest, repeatedly
press UP button.
9
To review the records from newest to oldest, repeatedly
press DOWN button. After you review all the records in
memory, ;D:ýE<ýB?IJ appears.
If an incorrect, invalid or incomplete Caller ID signal is
received, the display shows B?D;ý;HHEH.
If the name and number are not available due to the caller’s
restriction, the display shows FH?L7J;ý97BB.
If the name and number are not available, the display shows
¶KD7L7?B78B;¶.
HFJ appears with a number if you have received a call from
the same phone number more than once.
If you do not press a button within 20 seconds, the system
automatically returns to the normal display.
%#.."$#%-"(41/"%#..'4"+&"/'/14;
Option 1
1. With the handset hung up on the base, press UP or
DOWN button to find the number to be dialed.
2. Press CALL BACK twice. F?9AýKFý97BB appears.
3. Lift the handset. The number is dialed automatically.
Option 2
1. Lift the handset.
2. Press UP or DOWN to find the number to be dialed.
3. Press CALL BACK twice. The number is dialed
automatically.
When the Caller’s Phone number has a different area code
from the preset area code, the initial digit 1 and the three
digit area code will be inserted automatically during Caller
ID memory call back.
1. Press CALL BACK. The 11-digit number will flash.
2. Press CALL BACK again to confirm and dial the 11-digit
number.
When the Caller’s phone number has the same area code
as the preset, the initial digit 1 and the three digit area code
will be deleted during the Caller ID memory call back.
1. Press CALL BACK. The seven-digit number flashes.
10
2. Press CALL BACK again to confirm and dial the sevendigit number.
Your telephone company may require a different format for
making out-of area (toll) calls within your area code.
When your telephone company requires you to dial more
than a seven-digit number (same area code) to make toll
calls within your area code, or an 11-digit number (different
area code) use one of the 4 options below for Caller ID call
back.
Option 1
1 + Area Code + 7-digit number (11 digits)
Option 2
1+7-digit number (8 digits)
Option 3
Area Code + 7-digit number (10 digits)
Option 4
7-digit number
1. Press UP or DOWN to find the Caller ID memory to be
dialed.
2. Press CALL BACK. The 7-digit number (if same as area
code) or 11-digit number (if different area code) flashes.
3. Press UP or DOWN to select one of the four options.
4. Press CALL BACK again to confirm.
5. Pick up the handset. The selected number is dialed.
&'.'6+0)"%#.."4'%14&5
You can select and delete an individual call record, or delete
all call records stored in the system.±
±"016'"±"
•
When the phone’s memory is
full, it automatically replaces the
oldest call record with the
newest incoming call.
•
If you do not press a button
within 15 seconds of when
ERASE ALL CALLS appears,
the phone returns to the normal
display.
To delete a single call record, press UP or DOWN until the
call record you want to delete appears.
When the phone displays the call record, press DELETE
twice quickly. The phone deletes the call record, and
automatically renumbers the remaining call records.
11
Limited One-Year Warranty
This product is warranted by RadioShack against
manufacturing defects in material and workmanship under normal use for one (1) year from the
date of purchase from RadioShack companyowned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS
WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO
THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. EXCEPT
AS PROVIDED HEREIN, RadioShack SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO
CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS
OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE
PRODUCT OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, INCLUDING, BUT NOT
LIMITED TO, ANY DAMAGES RESULTING
FROM INCONVENIENCE, LOSS OF TIME,
DATA, PROPERTY, REVENUE, OR PROFIT OR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply
to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date
to any RadioShack store. RadioShack will, at its
option, unless otherwise provided by law: (a) correct the defect by product repair without charge
for parts and labor; (b) replace the product with
one of the same or similar design; or (c) refund
the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or
reconditioned parts and products may be used in
the performance of warranty service. Repaired or
replaced parts and products are warranted for the
remainder of the original warranty period. You will
be charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God,
abuse, accident, misuse, improper or abnormal
usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b)
any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic
damage; (e) transportation, shipping or insurance
costs; or (f) costs of product removal, installation,
set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and
you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor
Street, 6th Floor, Fort Worth, TX 76102
To delete all of the call records at once, at the normal
display, hold down DELETE for about three seconds. ;H7I;ý
7BBý97BBI appears.
Press DELETE. The system deletes all call records. DEý97BBI
appears, then JEJ7B0ý&&, D;Mý0ý&&ýappears.±
%#4'
Keep the phone dry; if it gets wet, wipe it dry immediately.
Use and store the phone only in normal temperature
environments. Handle the phone carefully; do not drop it.
Keep the phone away from dust and dirt, and wipe it with a
damp cloth occasionally to keep it looking new.
5'48+%'"#0&"4'2#+4
If your phone is not performing as it should, take it to your
local RadioShack store for assistance. Modifying or
tampering with the phone’s internal components can cause
a malfunction and might invalidate its warranty, and void
your FCC authorization to operate it.
12/99
RadioShack Corporation
Fort Worth, Texas 76102
43-3901
LIB949YY
05A02
Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising