AEG | L 98699 FL | User manual | AEG L 98699 FL User manual

AEG L 98699 FL User manual
WASHING MACHINE
USER MANUAL
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
L 98699 FL
2
CONTENTS
eu
ls
.
ua
an
ev
ic
19
20
22
23
24
26
31
34
SAFETY INFORMATION
ENVIRONMENT CONCERNS
TECHNICAL INFORMATION
PRODUCT DESCRIPTION
INTERIOR ACCESSORIES
CONTROL PANEL
WASHING PROGRAMMES
BEFORE FIRST USE
USING THE APPLIANCE
ACTIVATING THE APPLIANCE AND SETTING A
PROGRAMME
LOADING THE LAUNDRY
USING THE DETERGENT AND ADDITIVES
STARTING A PROGRAMME
AT THE END OF PROGRAMME
HELPFUL HINTS AND TIPS
CARE AND CLEANING
TROUBLESHOOTING
INSTALLATION
em
4
6
7
8
8
9
14
18
18
18
w
.d
SERVICE
w
w
When contacting Service, ensure that
you have the following data available.
The information can be found on the
rating plate.
Model
PNC
Serial Number
The following symbols are used in this
user manual:
Warning - Important Safety information.
General information and tips
Environmental information
Subject to change without notice
ENGLISH
3
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
an
ua
ls
.
eu
In the AEG webshop, you’ll find everything
hing you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
w
w
.d
ev
ic
em
Visit the webshop at:
www.aeg.com/shop
w
VISIT OUR WEBSITE FOR:
- Products
- Brochures
- User manuals
- Trouble shooter
- Service information
www.aeg.com
4
SAFETY INFORMATION
Before the installation and use, read
this manual carefully:
• For your safety and the safety of your
property
• To help the environment
• For the correct operation of the appliance.
Always keep these instructions with the
appliance also if you move or give it to
a different person.
The manufacturer is not responsible if
an incorrect installation and use causes
damage.
GENERAL SAFETY
w
w
w
.d
ev
ic
ls
.
ua
em
an
• Do not let persons, children included, with reduced physical sensory,
reduced mental functions or lack of
experience and knowledge use the
appliance. They must have supervision or instruction for the operation
of the appliance by a person who is
responsible for their safety.
• Keep all packaging away from children. There is the risk of suffocation
or injury.
• Keep all detergents away from children.
• Keep children and pets away from
the appliance when the door is open.
• Before you close the appliance door,
make sure that children and pets are
not into the drum.
• If the appliance has a child safety device, we recommend to activate it.
eu
CHILDREN AND VULNERABLE
PERSON SAFETY
• Do not use the appliance for professional use. The appliance is only for
domestic use.
• Do not change the specifications of
this appliance. There is the risk of injury and damage to the appliance.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Risk of explosion or fire.
• Obey the safety instructions on the
detergent packaging to prevent
burns to eyes, mouth and throat.
• Make sure that you remove all metal
objects from the laundry. Hard and
sharp material can cause damage to
the appliance.
• Do not touch the glass of the door
while a programme operates. The
glass can be hot (only for front-loading appliances).
CHILD SAFETY DEVICE
• When you activate this device, you
cannot close the door. This prevents
children or pets to be closed in the
drum. To activate the device, turn it
clockwise, until the groove is horizontal. To deactivate the device, turn it
counterclockwise, until the groove is
vertical.
CARE AND CLEANING
• Deactivate the appliance and disconnect the mains plug from the mains
socket.
• Do not use the appliance without the
filters. Make sure that the installation
of the filters is correct. An incorrect
installation causes water leakages.
INTERNAL LAMP
This appliance has an internal lamp that
comes on when you open the door and
goes off when the door is closed.
ENGLISH
5
WARNING!
Do not look directly into the
beam of the lamp.
• The first time you use the appliance,
make sure that the water hoses and
the couplings do not have leakages.
To replace the internal lamp,
contact the service centre.
Disconnect the mains plug from
the mains socket before the replacement of the internal lamp.
Electrical connection
ls
.
ua
w
w
w
.d
ev
ic
em
an
• The appliance is heavy, be careful
when you move it.
• Do not transport your appliance without the transit bolts, you can damage
internal components and cause leakages or malfunctions.
• Do not install and connect a damaged appliance.
• Make sure to remove all packaging
and transport bolts.
• Make sure that the mains plug is disconnected from the mains socket
during installation.
• Only a qualified person must do the
electrical installation, the plumbing
and the installation of the appliance.
This to prevent the risks of structural
damage or injury.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• When you install the appliance on a
carpet floor, make sure that there is
air circulation between the appliance
and the carpet. Adjust the feet to
have the necessary space between
the appliance and the carpet.
eu
INSTALLATION
• Make sure that the appliance is
earthed.
• Make sure that the electrical information on the rating plate agrees with
the power supply.
• Always use a correctly installed
shockproof socket.
• Do not use multiple plugs and extension cables. There is a risk of fire.
• Do not replace or change the mains
cable. Contact the service centre.
• Make sure not to cause damage to
the mains plug and cable.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access
to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
• Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
• Permanent connection. To connect
the appliance permanently, install a
double-pole isolating switch between
the appliance and the electricity supply. It must have a minimum distance
of 3 mm between the switch contacts
and it must be the correct type for
the necessary load. It must agree
with the last electrical legislation. The
switch must not break the yellow and
green ground cable.
Only a qualified electrician must install this type of device.
Water connection
• Do not connect the appliance with
old hoses already used. Only use new
hoses.
• Make sure not to cause damage to
the water hoses.
• Do not connect the appliance to new
pipes or pipes not used for a long
time. Let the water flow for some minutes, then connect the inlet hose.
DISCARD THE APPLIANCE
1. Disconnect the mains plug from the
mains socket.
2. Cut off the mains cable and discard
it.
6
suffocation (only for front-loading
appliances).
3. Discard the door catch. This prevents children or pets to be closed
in the appliance. There is a risk of
ENVIRONMENT CONCERNS
• Always start a washing programme
with the maximum load of laundry.
• If necessary, use a stain remover
when you set a programme with a
low temperature.
• To use the correct quantity of the detergent, check the water hardness of
your domestic system
PACKAGING MATERIALS
Recycle the materials with the symbol
.
Put the packaging in applicable containers to recycle it.
ECOLOGICAL HINTS
ua
ls
.
eu
To help the environment, use less water
and energy, obey these instructions:
• Set a programme without the prewash phase to wash laundry with normal soil.
w
w
w
.d
ev
ic
em
an
IN THE INTEREST OF THE ENVIRONMENT
The symbol
on the product or on its
packaging indicates that this product
may not be treated as household
waste. Instead it should be taken to the
appropriate collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative
• Connect the appliance to the FOUL
system for the drain water. The sewage works keeps the drain water for
the treatment before to release safely
it into a river. Do not connect this appliance to the surface drain system of
the water because it releases the
drain water directly into a river or
stream without a treatment and this
can cause of pollution. Contact your
local water authority to have more information.
consequences for the environment and
human health, which could otherwise
be caused by inappropriate waste
handling of this product. For more
detailed information about recycling of
this product, please contact your local
council, your household waste disposal
service or the shop where you
purchased the product.
ENGLISH
7
TECHNICAL INFORMATION
Dimensions
Width / Height / Depth
Electrical connection:
640 mm
Voltage
Overall power
Fuse
Frequency
230 V
2200 W
10 A
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
0,5 bar (0,05 MPa)
Maximum
8 bar (0,8 MPa)
Cotton
Spin speed
Maximum
ua
Maximum load
ls
.
Water supply 1)
w
w
.d
ev
ic
em
an
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
w
IPX4
Minimum
eu
Water supply pressure
600 / 850 / 600 mm
Total depth
Cold water
9 kg
1600 rpm
8
PRODUCT DESCRIPTION
1
2
3
9
10
11
4
5
6
12
7
13
eu
8
8 Feet for the appliance level
9 Water drain hose
ua
ls
.
1 Worktop
2 Detergent dispenser
10 Water inlet hose
11 Mains cable
an
3 Control panel
4 Door handle
em
5 Internal lamp
6 Rating plate
ev
ic
7 Drain pump
12 Transit bolts
13 Feet for the appliance level
w
2
w
w
1
.d
INTERIOR ACCESSORIES
5
4
3
1 Spanner
To remove the transit bolts.
2 Plastic caps
To close the holes on the rear side
of the cabinet after the removal of
the transit bolts.
3 Sound barrier
To decrease the noise while the appliance operates.
4 Plastic hose guide
To connect the drain hose on the
edge of a sink.
5 Anti-flood inlet hose
To prevent possible leakage.
ENGLISH
9
CONTROL PANEL
2
3
4
5
11
10
8
7
6
7 Delay start touch button
8 Time save touch button
ua
ls
.
1 Auto Off button
2 Programme knob
ev
ic
em
5 Memory touch buttons
6 Start/Pause touch button
an
9 Extra rinse touch button
10 Option touch button
3 Display
4 Steam touch button
TOUCH SCREEN
9
eu
12
w
w
.d
Do not wear gloves when you
touch the buttons.
Make sure the touch screen and
buttons are always clean and
dry.
w
1
AUTO OFF BUTTON 1
Press this button to activate or deactivate the appliance. A tune sounds when
the appliance is activated.
The AUTO OFF function automatically
deactivates the appliance to stop the
energy consumption when:
• You do not use the appliance for 5
minutes before you press button 6 .
11 Spin reduction touch button
12 Temperature touch button
– All settings are cancelled.
– Press button 1 to activate the appliance again.
– Set again the washing programme
and all possible options.
• After 5 minutes from the end of the
washing programme. Refer to 'At the
end of programme'.
PROGRAMME KNOB 2
Turn this knob to set a programme. The
related programme indicator comes on.
10
DISPLAY 3
A
H
I
G
C
F
D
E
eu
J
B
ls
.
ua
an
A
The text bar:
• Guides you in the use of the appliance.
• Shows the programme status and phase.
• Shows alarm messages. Refer to 'Troubleshooting' .
em
The symbols appear on the display when the related phase or function is set.
Child lock
C
Door locked
You cannot open the door when the symbol is on.
You can open the door only when the symbol goes off.
If the symbol stays on but the programme is completed:
• There is water in the drum.
• The ' Rinse Hold ' function is on.
w
w
w
.d
ev
ic
B
• The time of the day
When you activate the appliance the display shows the time of the
day for some seconds. To adjust the clock, refer to "Clock setting".
• The programme duration
When the washing programme starts, the programme time decreases
every minute.
D
Programme duration symbol
The symbol comes on when the digits shows the programme duration.
• The end time of the washing programme .
Programme end symbol
The symbol comes on when the digits shows the programme end time.
ENGLISH
11
• The time of delay
– When you set the delayed start the time of the programme end increases by steps of 30 minutes till 10 hours and by steps of one
hour till 20 hours.
• The end of the programme
The display shows a zero.
This part comes on only if the door is open - Refer to 'Loading the laundry'.
The programme maximum load
The weight of the laundry
E
The indicator bar fills accordingly to the laundry weight.
eu
The indicator fully fills when you put the maximum load.
ls
.
If you need to set a function
an
ua
• An empty indicator bar comes on when the related function is available with the set programme. If an indicator bar does not come on, it
means that it is not available.
em
• The function symbol comes on when the function is set.
• The indicator bar fills accordingly to the set function.
ev
ic
• If you make an incorrect selection the text bar on the display tells that the selection is not possible.
w
w
w
F
.d
Time save
The symbol comes on when you set the following functions:
G
Shortened duration
Extra quick
Extra rinsing
The indicator bar fills accordingly the numbers of rinses.
Stains
Prewash
H
Soak
The indicator bar fills accordingly to the set functions.
The default spin speed of the programme.
I
___
No spin 1)
12
Rinse hold
1) Only available for Spin/Drain programme.
The default temperature of the programme.
J
Cold wash
STEAM BUTTON 4
DELAY START BUTTON 7
Touch button 4 to set the steam level.
This is possible only with programmes
where the steam function is available.
The duration of the steam phase
changes accordingly to your selection.
Touch button 7 to delay the start of a
programme from 30 minutes to 20
hours.
MEMORY BUTTONS 5
Touch button 8 to decrease the programme time.
You can select:
SHORTENED DURATION
To wash items with daily soil.
EXTRA QUICK
To wash quickly items with almost no
soil.
Some programmes accept only one of
these functions.
eu
TIME SAVE BUTTON 8
w
.d
ev
ic
ua
em
an
Memorise a programme
1. Press button 1 to activate the appliance.
2. Turn the programme knob ( 2 ) to
your favourite programme.
3. If it is necessary, set one or more
functions.
4. Touch and hold one of the buttons
5 for some seconds. The buzzer
sounds and the display shows that
the programme is saved. .
ls
.
Touch one of the buttons 5 to memorise a programme or to set a memorised programme.
w
w
Set a memorised programme
1. Touch the button where you memorised the programme you want to
set.
2. The programme indicator comes
on and the display shows all the information.
To cancel a memorised programme you can only memorise
a new programme.
START/PAUSE BUTTON 6
Touch button 6 to start or interrupt a
programme.
EXTRA RINSE BUTTON 9
Touch button 9 to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the water is soft.
STAINS, PREWASH AND SOAK
BUTTON 10
Touch button 10 to set one of the these
functions:
STAINS
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
.
The programme duration increases.
This function is not available
with a temperature lower than
40° C.
ENGLISH
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, touch button 10 and button 9
at the same time for 6 seconds.
PREWASH
Use this function for heavy soil.
The appliance adds a prewash phase to
the main wash.
The programme duration increases.
If you deactivate the acoustic
signals, they continue operate
only when you touch the buttons and when a malfunction occurs.
SOAK
Use this function for heavy soil.
The appliance soaks the laundry at
30°C for about half an hour before to
wash.
CHILD LOCK FUNCTION
SPIN BUTTON 11
This function prevents children to play
with the control panel.
• To activate the function, touch button 12 and button 11 at the same
time until the display shows the symbol
.
• To deactivate the function, touch
button 12 and button 11 at the
goes
same time until the symbol
off.
You can activate the function:
• Before you touch the button 6 : the
appliance cannot start.
• After you touch the button 6 , all
the buttons and the programme
knob are deactivated.
.d
ev
ic
em
an
ua
ls
.
eu
Touch button 11 to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase (' No Spin '
function).
• Activate the ' Rinse Hold ' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
13
w
TEMPERATURE BUTTON 12
w
w
Touch button 12 to change the default
temperature.
Symbols - - - and
= cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You touch the buttons.
• The programme is completed.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the extra rinse function permanently on when
you set a new programme.
• To activate the function touch button 8 and button 7 at the same
time until the display shows the symbol
.
• To deactivate the function touch
button 8 and button 7 at the
goes
same time until the symbol
off.
14
WASHING PROGRAMMES
Temperature
Type of load
Weight of load
Programme
description
Functions
Cottons
95° - Cold
White and coloured cotton
with heavy level
of soil.
Maximum load 9
kg
Wash
Rinses
Long spin
Spin Reduction
Rinse Hold
Stains1)
Prewash2)
Soak
Extra rinse
Time save3)
Extra Silent
95° - Cold
White and coloured cotton
with normal level
of soil.
Maximum load 9
kg
Wash
Rinses
Long spin
Stop with water in the
drum
Rinse Hold
Stains1)
Prewash2)
Soak
Extra Rinse
Time save3)
Synthetics
60° - Cold
Rinses
Short spin
Synthetic or
mixed fabric
items with normal soil.
Maximum load 4
kg
Wash
Rinses
Short spin
Spin Reduction
Rinse Hold
Stains1)
Prewash2)
Soak
Extra Rinse
Time save3)
Easy Iron
60° - Cold
Synthetic fabric
Wash
items with norRinses
mal soil. It preShort spin
vents the creases
of the laundry.
Maximum load 4
kg
Spin Reduction
Rinse Hold
Prewash2)
Soak
Extra Rinse
Time save3)
Delicate fabrics
as acrylics, viscose, polyester
items with normal soil.
Maximum load 4
kg
Spin Reduction
Rinse hold
Prewash2)
Stains
Soak
Extra Rinse
Time save3)
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
Programme
Delicates
40° - Cold
Rinses
Short spin
Wash
Rinses
Short spin
ENGLISH
Temperature
Type of load
Weight of load
Programme
description
Functions
Wool / Silk
40° - Cold
Rinses
Short spin
Machine washa- Wash
ble wool as well
Rinses
as for hand wash- Short spin
able woollens
and delicate fabrics with «hand
washing» care
symbol.
Maximum load 2
kg
Spin Reduction
Rinse Hold
Duvet
60° - 30°
Rinses
Short spin
Special proWash
gramme for one Rinses
synthetic blanket, Short spin
duvet, bedspread and so
on.
Maximum load 3
kg
Spin Reduction
Anti-Allergy
60°
White cotton
items4).
Maximum load 9
kg
ua
ls
.
eu
Programme
15
Spin Reduction
Rinse hold
Stains
Prewash2)
Soak
Extra Rinse
All fabrics
The maximum
load of the laundry is related to
the type of laundry.
Drainage of
the water
Spin phase at
the maximum
speed
Spin Reduction
No spin6)
w
w
w
.d
Spin / Drain5) 0°
ev
ic
em
an
Wash at 60°
Rinses
Short spin
Rinse
0°
All fabrics
Maximum load 9
kg
Rinse with ad- Spin Reducditives
tion
Spin phase
Rinse hold
Extra Rinse 7)
Outdoor
40° - Cold
Waterproof,
sports and outdoor clothing.
Do not use any
fabric softener!
Maximum load 9
kg
Wash
Rinses
Short spin
Spin Reduction
Rinse Hold
Extra Rinse
16
Temperature
Type of load
Weight of load
Programme
description
Functions
20 Min. - 3
kg
40° or 30°
Quick wash of
sport items or
cotton and synthetic items,
lightly soiled or
worn once.
Maximum load 3
kg
Wash
Rinses
Short spin
Spin Reduction
Super Eco
0°
Mixed fabrics
(cotton and synthetic items)8).
Maximum load 3
kg
Wash
Rinses
Long spin
Spin Reduction
Rinse Hold
Extra Rinse
Economy
60° or 40°
White and fast
coloured cotton
with the normal
soil9).
Maximum load 9
kg
Wash
Rinses
Short spin
Spin Reduction
Rinse Hold
Stains
Prewash 2)
Soak
Extra Rinse
Time save3)
em
an
ua
ls
.
eu
Programme
ev
ic
1) Not available with temperature lower than 40°C.
2) If you use liquid detergent, set a programme without PREWASH.
3) If you touch the button 8 to set the Extra quick unction, we recommend that you
w
w
w
.d
decrease the quantity of the load. It is possible to keep the full load but the washing results
are not good.
4) This program removes the micro-organisms thanks to the washing by 60° C and adds on
rinse. In this way the action is more effective. Important! Put into the compartment Stain
a special additive for hygiene and select the option Stain.
5) The default spin speed is for cotton items. Set the spin speed applicable with your laundry.
6) If you select this function the appliance performs only a drain phase.
7) Touch button 9 to add rinses. With a low spin speed the appliance performs delicate
rinses and a short spin.
8) Use a special detergent for very low temperature.
9) Set this programme to have a good washing results and decrease the energy consumption.
The time of the washing programme is extended.
STEAM PROGRAMMES
Programme1)
Type of load
Load
Steam - Refresh2)
This cycle removes odour from
the laundry.
Cotton and synthetic items.
up to
1,5 Kg
Steam does not remove
animal odours.
ENGLISH
Steam - Anticrease2)
This programme helps to dewrinkle the laundry.
Cotton and synthetic items.
17
up to
1,5 Kg
Steam can be used for dried, washed or worn once laundry. These programmes can reduce creases and odours and make your laundry more
smooth.
Do not use any detergent. If necessary, remove stains by washing or using
localized stain removal.
Steam programmes do not perform any hygienic cycle.
Do not set the Steam programme for this type of clothes:
• Clothes which is not specified on the care label as being suitable for tumbledrying.
• Clothes with inclusion of plastic, metal, wooden parts or alike.
eu
Touch the button 4 to change the duration of steam phase.
em
CONSUMPTION VALUES
2.5
73
1.6
69
ev
Water consumption (litre)2)
1.0
69
Synthetics 40 °C
0.6
48
Delicates 40 °C
0.7
58
Wool/ Handwash 30 °C
0.35
57
w
w
w
Cottons 40 °C
Energy consumption
E
(KWh)2)
.d
Cottons 60 °C
ic
Programme1)
White Cottons 95 °C
an
ua
ls
.
1) If you set a Steam programme with dried laundry, at the end of the cycle the laundry feel
humid. It is better to expose clothes to the open air for about 10 minutes to let the humidity
go away. Laundry should be removed from the drum as quick as possible. After a steam
cycle, clothes may to be ironed anyway, but with less effort!
2) For the programme time, refer to the display.
1) Refer to the display for the programme time.
2) The consumption information shown in this chart is indicative. It can vary depending on the
quantity and the type of laundry, on the temperature of the water supply and on the
ambient temperature.
Standard programmes for the
Energy Label consumption
values
The cotton 60 °C economy and cotton
40 °C economy are the standard cotton
programmes for normally soiled cotton
laundry. They are suitable to clean normally soiled cotton laundry and they
are the most efficient programmes in
terms of combined energy and water
consumption for washing that type of
cotton laundry.
They agree with EN60456.
The actual water temperature
may differ from the declared cycle temperature.
18
BEFORE FIRST USE
1. To activate the drain system, put 2
litre of water in the main wash compartment of the detergent dispenser.
2. Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start
a programme for cotton at the
highest temperature without laundry. This removes all possible dirt
from the drum and the tub.
CLOCK SETTING
After you set the language, the display
tells to set the clock:
• The hour digits flash.
• Turn the programme knob to change
the hour.
• Touch button 6 to confirm the selection.
• The minute digits flash.
• Turn the programme knob to change
the minutes.
• Touch button 6 to confirm the selection.
ua
ls
.
Change the time of the day
after the first activation
1. Touch button 9 and the button
8 at the same time for some seconds.
2. The hour digits flash.
3. Turn the programme knob to
change the hour.
4. Touch button 6 to confirm the selection.
5. The minute digits flash.
6. Turn the programme knob to
change the minutes.
7. Touch button 6 to confirm the selection.
em
an
The first time you activate the appliance, the display shows the default language and tells you to confirm it or
change it:
• Turn the programme knob to set the
desired language.
• When the display shows the necessary language, touch button 6 to confirm the selection.
eu
LANGUAGE SETTING
ev
ic
Change the language after the
first activation
w
w
w
.d
1. Touch button 11 and button 10 at
the same time fo
forr some seconds.
2. When display shows the language
set, turn the programme knob to
set the new language.
3. Touch button 6 to confirm the selection.
USING THE APPLIANCE
1. Open the water tap.
2. Connect the mains plug to the
mains socket.
ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME
For a correct operation of the weight sensor, activate the appliance and
set the programme BEFORE you put the laundry in the drum.
1. Press button 1 to activate the appliance.
2. Turn the programme knob ( 2 ) to
the necessary programme or touch
one of the buttons 5 to set a
memorised programme. The programme indicator comes on.
3. The indicator of button 6 flashes
with red colour.
ENGLISH
19
to set a delayed start. The display
shows the symbol of the set function and the digit ( D ) shows the
delayed time.
4. The display shows the default temperature and spin. If it is necessary,
touch button 12 and button 11 to
change the water temperature and
the spin speed.
5. If it is necessary, touch the other
buttons to add some functions or
LOADING THE LAUNDRY
ua
ls
.
eu
If you put more laundry than the
maximum load, the display tells
that you put more than the maximum load.
You can wash your laundry but
the energy and water consumption increase.
To have the best consumption
and washing performance remove some items.
The overload indication is available only for programmes with a
maximum load lower than the
appliance maximum load.
5. Close the door. The text bar on the
display tells the percentage of detergent to use. This data is indicative and refers to the detergent
quantity for a maximum load that
the manufacturer recommends.
w
w
w
.d
ev
ic
em
an
1. Open the appliance door.
2. The display (E) shows the maximum
programme load for the programme (MAX ) and the weight of
the laundry (KG). The text bar on
the display tells to add the laundry.
3. Put the laundry in the drum, one
item at a time. Shake the items before you put them in the appliance.
4. On the display the weight of the
laundry updates by step of kg 0.5.
The weight is indicative and
changes with the type of the laundry.
Make sure not to have the laundry out
of the drum between the seal and the
door. There is the risk of water leakage
or damage laundry.
20
USING THE DETERGENT AND ADDITIVES
ls
.
eu
The detergent compartment for the prewash phase and the soak
programme.
Add the detergent for prewash and soak before the start of the
programme.
ua
The detergent compartment for the washing phase.
If you use a liquid detergent, put
put it immediately before you start
the programme.
em
an
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the programme.
ic
This is the maximum level for the quantity of liquid additives.
.d
ev
The compartment for the stain remover.
Put the product in the compartment and set the stain function before you start the programme.
w
w
w
Flap for powder or liquid detergent
Turn it (up or down) in the correc
correct position to use powder or liquid
detergent.
Always obey the instructions that yo
you find on the packaging of the detergent products.
Check the position of the flap
1. Pull out the detergent dispenser
until it stops.
2. Press the lever down to remove the
dispenser.
ENGLISH
3.
To use powder detergent, turn the
flap up.
4.
To use liquid detergent, turn the
flap down.
ls
.
eu
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid detergent than the limit showed in
the flap.
– Do not set the prewash
phase.
– Do not set the delay start
function.
ua
an
em
ic
ev
.d
w
w
6.
Measure out the detergent and the
fabric conditioner.
Carefully close the detergent dispenser. Make sure that the flap
does not cause a blockage when
you close the drawer.
w
5.
21
22
SET THE DELAY START
Before you touch button 6 to
start the appliance, you can cancel or change the set of the delay start.
1. Touch button 7 again and again
to set the desired delayed start.
The display shows the expected
end of the programme
2. Touch button 6 , the appliance
starts the countdown of the delay
start.
When the countdown is completed, the programme starts automatically.
You cannot set the delay start
with the Steam programme.
STARTING A PROGRAMME
ls
.
eu
You can change only some functions
before they operate.
1. Touch button 6 . The indicator
flashes.
2. Change the function set.
3. Touch button 6 again. The washing programme continues.
.d
ev
ic
em
an
The appliance adjust automatically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum necessary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
CHANGE A FUNCTION
ua
1. Touch button 6 to start the programme. The indicator of button
6 stops to flash and is on with red
colour.
If a delayed start is set, the appliance
starts the countdown.
w
w
INTERRUPT A PROGRAMME
w
1. Touch button 6 . The indicator
flashes.
2. Touch button 6 again. The washing programme continues.
CANCEL A PROGRAMME
1. Press button 1 to cancel the programme and to deactivate the appliance.
2. Press button 1 again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button 6 . The door lock
symbol in the display goes off and
a message tells you that the door is
unlocked.
2. Open the appliance door.
3. Close the appliance door and
touch button 6 again. The programme or the delay start continues.
If the temperature and the level
of the water is too high, the
door lock symbol stays on. You
cannot open the door. If necessary, do the following procedure
to open the door:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is
in the drum.
ENGLISH
23
If you deactivate the appliance,
it is necessary to set the programme again.
AT THE END OF PROGRAMME
9.
1. The appliance stops automatically.
2. The acoustic signals operate, if it is
active.
3. In the display
goes on and the
message tells you that the programme is completed.
4. The indicator of button 6 goes
off.
5. The door lock symbol goes off.
6. Press button 1 to deactivate the
appliance. After five minutes from
the end of the programme, the AUTO OFF function automatically deactivates the appliance.
ua
ls
.
eu
To drain the water:
1. If necessary, decrease the spin
speed.
2. Touch button 6 . The appliance
drains the water and spins.
3. When the programme is completed and the door lock symbol goes
off, you can open the door
4. Press button 1 to deactivate the
appliance.
ic
ev
.d
w
w
8.
Remove the laundry from the appliance. Make sure that the drum is
empty.
Keep the door ajar, to prevent mildew and odours.
w
7.
em
an
When you activate the appliance again, the display shows
the end of the last set programme. Turn the programme
knob to set a new cycle.
Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
The appliance drain and spin
automatically after approximately 18 hours.
24
HELPFUL HINTS AND TIPS
DETERGENTS AND ADDITIVES
• Divide the laundry in: white, coloured, synthetics, delicates and wool.
• Obey the washing instructions that
are on the laundry care labels.
• Do not wash together white and coloured items.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered fabrics,
wool and items with painted illustrations.
• Remove hard stains.
• Wash with a special detergent heavy
soil stains.
• Be careful with the curtains. Remove
the hooks or put the curtains in a
washing bag or pillowcase.
• Do not wash in the appliance :
– Laundry without hems or with cuts
– Underwired bras.
– Use a washing bag to wash small
items.
• A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase
again.
• Only use detergents and additives
specially made for washing machines.
• Do not mix different types of detergents.
• To help the environment, do not use
more than the correct quantity of detergent.
• Obey the instructions that you find
on the on packaging of these products.
• Use the correct products for the type
and colour of the fabric, the programme temperature and the level of
soil.
• If you use liquid detergents, do not
set the prewash phase.
• If your appliance has not the detergent dispenser with the flap device,
add the liquid detergents with a dosing ball.
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
THE LAUNDRY LOAD
STUBBORN STAINS
For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the
appliance.
Special stain removers are available.
Use the special stain remover that is applicable to the type of stain and fabric.
WATER HARDNESS
If the water hardness in your area is
high or moderate, we recommend that
you use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to
use a water softener.
To know the water hardness in your
area, contact your local water authority.
Obey the instructions that you find on
the packaging of the products.
Equivalent scales measure the water
hardness:
• German degrees (°dH).
• French degrees (°TH).
• mmol/l (millimol for each litre - international unit for the hardness of water).
• Clarke degrees.
ENGLISH
Water hardness table
Level
Water hardness
Type
°dH
°T.H.
mmol/l
Clarke
soft
0-7
0-15
0-1.5
0-9
2
medium
8-14
16-25
1.6-2.5
10-16
3
hard
15-21
26-37
2.6-3.7
17-25
4
very hard
> 21
> 37
>3.7
>25
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
1
25
26
CARE AND CLEANING
WARNING!
CAUTION!
Do not use alcohol, solvents or
chemical products.
Disconnect the appliance from the
mains supply before you clean it.
MAINTENANCE WASH
DESCALING
With the low temperature programmes
it is possible that some detergent stays
in the drum. Make regularly a maintenance wash. To do this:
• Empty the laundry from the drum.
• Set the hottest cotton wash programme
• Use a correct quantity of powder detergent with biological properties.
After each wash, keep the door open
for a while to prevent mould and to let
unpleasant smells go out.
ls
.
eu
The water we use contains limescale. If
it becomes necessary, use a water softener to remove limescales.
Use a special product made for washing machines. Obey the instructions
that you find on the packaging of the
manufacturer.
Do this separately from the laundry
wash.
an
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
ua
EXTERNAL CLEANING
Regularly examine the seal and remove
all objects from the inner part.
w
DRUM
w
w
.d
ev
ic
em
DOOR SEAL
Regularly examine the drum to prevent
limescale and rust particles.
Only use special products to remove
rust particles from the drum.
To do this:
• Clean the drum with special product
for stainless steel.
• Start a short programme for cotton at
the maximum temperature with a
small quantity of detergent.
ENGLISH
27
DETERGENT DISPENSER
To clean the dispenser:
1. Press the lever.
2. Pull the dispenser out.
1
2
5.
6.
Clean the dispenser recess with a
brush.
Put back the dispenser in the recess.
w
w
.d
ev
ic
em
an
ua
ls
.
4.
Remove the top part of the liquid
additive compartment.
Clean all the parts with water.
eu
3.
w
DRAIN PUMP
Regularly examine the drain
pump and make sure that it is
clean.
Clean the pump if:
• The appliance does not drain the water.
• The drum cannot turn.
• The appliance makes an unusual
noise because of the blockage of the
drain pump.
• The display shows an alarm code because of the problem with water
drain.
WARNING!
1. Disconnect the mains plug
from the mains socket.
2. Do not remove the filter
while the appliance operates. Do not clean the drain
pump if the water in the appliance is hot. The water
must be cold before you
clean the drain pump.
28
To clean the drain pump:
1. Open the drain pump door.
Pull the flap out to remove it.
3.
Put a container below the recess of
the drain pump to collect the water
that flows out.
Press the two levers and pull forward the drainage duct to let the
water flow out.
em
an
ua
4.
ls
.
eu
2.
5.
6.
w
.d
ev
ic
1
w
w
2
When the container is full of water,
put the drainage duct back again
and empty the container. Do steps
4 and 5 again and again until no
more water flows out from the
drain pump.
Pull back the drainage duct and
turn the filter to remove it.
7.
Remove fluff and objects from the
pump.
8.
Make sure that the impeller of the
pump can turn. If this does not occur, contact the service centre.
ENGLISH
29
9.
Clean the filter under the water tap
and put it back in the pump into
the special guides.
10. Make sure that you tighten correctly the filter to prevent leakages.
11. Put the flap back and close the
drain pump door.
2
1
• The indicator of button 6 flashes
and the display shows the related
alarm. Refer to 'Troubleshooting'.
THE INLET HOSE FILTER AND
THE VALVE FILTER
It could be necessary to clean the filters
when:
• The appliance does not fill with water.
• The appliance fills with the water for
a long time.
ls
.
eu
WARNING!
Disconnect the mains plug from
the mains socket.
ua
To clean the water inlet filters:
w
.d
ev
ic
em
an
1. Close the water tap.
2. Remove the water inlet hose from
the water tap.
3. Clean the filter in the inlet hose
with a stiff brush.
4.
w
w
5.
Remove the inlet hose behind the
appliance.
Clean the filter in the valve with a
stiff brush or a towel.
6.
7.
35°
Install again the inlet hose. Make
sure that the couplings are tight to
prevent leakages.
Open the water tap.
45°
EMERGENCY DRAIN
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (6) of
'To clean the drain pump'.
If necessary, clean the pump.
Put the drainage duct back and close
the drain pump flap.
30
2. Close the water tap.
3. Remove the water inlet hose
4. Put the two ends of the inlet hose
in a container and let the water
flow out of the hose.
5. Empty the drain pump. Refer to the
emergency drain procedure
6. When the drain pump is empty, install the inlet hose again.
When you drain the water with the
emergency drain procedure, you must
activate again the drain system:
1. Put 2 litres of water in the main
wash compartment of the detergent dispenser.
2. Start the programme to drain the
water.
FROST PRECAUTIONS
WARNING!
Make sure that the temperature
is more than 0 °C before you
use the appliance again.
The manufacturer is not responsible for damages caused by
low temperatures.
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
If the appliance is installed in an area
where the temperature can be less than
0 °C, remove the remaining water from
the inlet hose and the drain pump.
1. Disconnect the mains plug from the
mains socket.
ENGLISH
31
TROUBLESHOOTING
The start of the appliance does not occur or it stops during operation.
Try to find a solution to the problem
before you contact the service centre
(refer to the table).
With some problems, the acoustic
signals operate and the display
shows an alarm message.
WARNING!
Deactivate the appliance before
you do the checks.
Possible cause
Possible solution
The display tells
to check the tap:
the appliance
does not fill with
water.
The water tap is closed.
Open the water tap.
The water inlet hose is
damaged.
Make sure that the water inlet
hose has no damages.
ls
.
eu
Problem
ua
The filters in the water in- Clean the filters. Refer to 'Care
and cleaning'.
let hose is blocked .
em
an
The connection of the
water inlet hose is not
correct.
ic
The water pressure is too
low.
Make sure that the connection is
correct.
Contact your local water authority.
Clean the water tap.
The water drain hose is
damaged.
Make sure that the water drain
hose has no damages.
The filter of the drain
pump is blocked.
Clean the filter of the drain
pump. Refer to 'Care and cleaning'.
The connection of the
water drain hose is not
correct.
Make sure that the connection is
correct.
The display tells
to check the
door.
The appliance door is
open or not closed correctly.
Close the door correctly.
The display tells
there is a water
alert.
The anti-flood device is
activated.
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
.d
ev
The water tap is blocked
or is furred with limescale.
w
w
w
The display tells
to check the
drain filter: the
appliance does
not drain the water.
32
PROBLEM WITHOUT ALARM MESSAGE
Problem
Possible cause
Possible solution
The appliance
does not drain
the water.
A washing programme
without the drain phase
is set.
Set the drain programme.
The function Rinse Hold
is on.
Set the drain programme.
The spin phase
The spin phase is off.
does not operate.
Clean the filter of the drain
pump. Refer to 'Care and cleaning'.
Balance problems with
the laundry load.
Adjust manually the items in the
tub and start the spin phase
again.
The mains plug is not
connected in the mains
socket.
Put in the mains plug.
ls
.
eu
The filter of the drain
pump is blocked.
ua
The programme
does not start.
Set the spin programme.
Replace the fuse.
an
Blow out fuse in the
household fuse box.
em
You did not touch button Touch button 6 .
6 .
ev
ic
The delay start is set.
Deactivate the Child Lock function.
Leakages from the couplings of the water hoses.
Make sure that the couplings are
tight.
Leakages from the drain
pump.
Make sure that the drain pump
filter is tight.
The water drain hose is
damaged.
Make sure that the water inlet
hose has no damages.
.d
The Child Lock function
is activated.
w
w
w
There is water on
the floor.
You cannot open
the appliance
door.
The appliance
makes an unusual
noise.
If necessary to wash the laundry
immediately, cancel the delay
start.
The washing programme Let the washing programme end.
is in operation.
There is water in the
drum.
Set the drain or the spin programme.
Incorrect level of the appliance.
Adjust the level of the appliance.
Refer to 'Installation'.
ENGLISH
Problem
Possible cause
Possible solution
You did not remove the
packaging and/or the
transit bolts.
Remove the packaging and/or
the transit bolts. Refer to 'Installation'.
The load is very small.
Add more laundry in the drum.
Make sure that the drain hose is
in the correct position.
The washing reThe detergent you used
sults are not satis- was not sufficient or corfactory.
rect.
Increase the detergent quantity
or use a different one.
You did not remove the
stubborn stains before
you wash the laundry.
Use special products to remove
the stubborn stains.
You set a not correct
temperature.
Make sure that you set the correct temperature.
ls
.
eu
The appliance fills The end of the drain
with water and
hose is too low.
drain immediately.
33
Decrease the laundry load.
The lamp is burned.
To replace the lamp, contact the
service centre.
After a steam
programme, garments are partially wet.
The appliance is not accurately levelled.
After a steam
programme, garments are not sufficiently smooth.
A wrong STEAM programme has been selected (e.g. Synthetic instead of Cotton).
Note the composition of the fabric.
Excessive laundry load.
Reduce the laundry load
Check the levelling and adjust
the appliance by raising or lowering the feet.
w
w
.d
ev
ic
em
an
ua
Too much laundry load.
The internal lamp
is off.
Press button 1 to deactivate
the appliance and to activate it
again.
The drum is full
but the display
shows 0.0 kg.
Press button 1 to deactivate
the appliance . Empty the drum
and obey to the necessary steps.
(Refer to 'Loading the laundy')
w
The drum is emp- It is necessary to set a
ty and the display tare.
shows there is
some weight in .
You loaded the laundry
before to activate the
appliance.
After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
service centre.
If the display shows other alarm message, contact the service centre.
34
INSTALLATION
UNPACKING
1. Use the gloves. Remove the external film. If necessary, use a cutter.
Remove the cardboard top.
Remove the polystyrene packaging
materials.
4.
Remove the internal film.
5.
Open the door. Remove the polystyrene piece from the door seal
and all the items from the drum.
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
2.
3.
ENGLISH
35
6.
Put the polystyrene front piece on
the floor behind the appliance.
Carefully put down the appliance
with the rear side on it. Make sure
not to damage the hoses.
7.
Remove the polystyrene protection
from the bottom.
8.
Fully clean and dry the bottom of
the appliance. Do not use alcohol,
solvents or chemical products.
9.
Make sure to identify the different
sizes and the positions of the
sound barriers. Refer to the illustration:
A (FRONT) = Front of the appliance
B (BACK) = Rear of the appliance
w
w
w
.d
ev
ic
em
an
2
ua
ls
.
eu
1
A
B
36
x4
10. – Remove the adhesive strip from
the silent barriers.
– Attach the four barriers to bottom of the appliance. Refer to
the illustration.
– Make sure that the barriers are
securely attached.
A
Attach the sound barriers at a
room temperature.
B
12. Remove the power supply cable
and the drain hose from the hose
holders.
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
11. Pull up the appliance in vertical position.
13. Turn the three bolts with the key
supplied with the appliance. Pull
out the plastic spacers.
ENGLISH
37
14. Replace the plastic spacers with
the plastic caps. You can find these
caps in the user manual bag.
We recommend that you keep
the packaging and the transit
bolts for when you move the appliance.
ua
ls
.
eu
WARNING!
Remove all the packaging and
the transit bolts before you install the appliance.
w
w
w
.d
ev
ic
em
an
POSITIONING AND LEVELLING
• Install the appliance on a flat hard
floor.
• Make sure that carpets do not stop
the air circulation below the appliance.
• Make sure that the appliance does
not touch the wall or other units
• Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibration, noise and the movement of the
appliance when in operation.
x4
• The appliance must be level and stable.
CAUTION!
Do not put cardboard, wood or
equivalent materials below the
appliance feet to adjust the level.
Make sure that there is sufficient
access after the installation for
possible repairs by a qualified
person.
38
15 mm thick under the appliance, secured to at least 2 floor beams with
screws, the wood panel must extend
beyond the front feet.
If possible install the appliance in one
of the corners of the room, where the
floor is more stable
Installation on suspended
flooring
Suspended wooden floors are particularly susceptible to vibration. To help
prevent vibration we recommend you
place a waterproof wood panel, at least
THE INLET HOSE
45
O
ua
O
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
w
w
w
.d
ev
ic
em
an
35
ls
.
eu
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the correct position.
Do not use an extension hose if
the inlet hose is too short. Contact the service centre for the replacement of the inlet hose.
Water pressure
The appliance works correctly if the water pressure is not less than 0.05 MPa
(0.5 bar).
If you can not connect the water inlet
hose to the cold water tap of the primary hydraulic system, connect it to
your domestic cold water storage system.
Make sure not to have more than a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of
the water storage tank.
ENGLISH
39
Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace
the hose.
A
WATER DRAINAGE
There are different procedures to connect the drain hose:
• On the edge of a sink.
• Make sure that the plastic guide cannot move when the appliance drains.
Attach the guide to the water tap or
the wall.
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
With the plastic hose guide.
• To a stand pipe with vent-hole.
Refer to the illustration. Directly into
a drain pipe at a height of not less
than 60 cm (23.6”) and not more than
100 cm (39.3”). The end of the drain
hose must always be ventilated , i.e.
the inner diameter of the drainpipe
(min. 38 mm — min. 1.5”) must be
larger than the external diameter of
the drain hose.
40
• If the end of the drain hose is this
(see the drawing), you can push it directly into the stand pipe.
Without the plastic hose guide.
ua
ls
.
eu
• To a sink spigot.
Refer to the illustration. Put the drain
hose in the spigot and tighten it with
a clip. Make sure that the drain hose
makes a loop to prevent that remaining particles go in the appliance from
the sink.
.d
ev
ic
em
an
• Directly to a built-in drain pipe in the
room wall and tighten it with a clip.
w
w
w
You can extend the drain hose
to maximum 400 cm. Contact
the service centre for the other
drain hose and the extension.
eu
ls
.
ua
an
em
ic
ev
.d
w
w
w
ENGLISH
41
eu
ls
.
ua
an
em
ic
ev
.d
w
w
w
42
eu
ls
.
ua
an
em
ic
ev
.d
w
w
w
ENGLISH
43
132935090-A-162011
w
w
w
.d
ev
ic
em
an
ua
ls
.
eu
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising