Dell | Inspiron 8200 | Specifications | Dell Inspiron 8200 Specifications

Dell Inspiron 8200 Specifications
Dell Inspiron 8200
Dell™ Inspiron™ 8200
A Tour of Your Computer
Solving Problems
Using Dell Diagnostics
Reinstalling Drivers and Utilities
Reinstalling Microsoft® Windows® XP
System Setup Program
Specifications
Power Management
Pin Assignments for I/O Connectors
Removing and Replacing Parts
Documentation
Hints, Notices, and Cautions
HINT: A HINT indicates important information that helps you make better use of
your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of
data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage,
personal injury, or death.
Abbreviations and Acronyms
For a complete list of abbreviations and acronyms, see the Tell Me How help file. To access the
Tell Me How help file, click the Start button on the Microsoft® Windows® desktop, and then click
Help and Support. Click User and system guides, and then click User’s guides. Click Tell
Me How.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/index.htm (1 of 2) [2/28/2004 7:40:03 AM]
Dell Inspiron 8200
Trademarks used in this text: Dell, the DELL logo, Inspiron, AccessDirect, and Dell TravelLite are
trademarks of Dell Computer Corporation; Intel and Pentium are registered trademarks of Intel
Corporation; ATI Mobility and RADEON are trademarks of ATI Technologies Inc.; Microsoft, MS-DOS, and Windows are
registered trademarks of Microsoft Corporation; GeForce2 Go is a registered trademark of NVIDIA
Corporation; Adobe is the trademark of Adobe Systems Incorporated which may be registered in certain
jurisdictions.
Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary
interest in trademarks and trade names other than its own.
October 2002 Rev. A01
file:///F|/Service%20Manuals/Dell/Inspiron/8200/index.htm (2 of 2) [2/28/2004 7:40:03 AM]
A Tour of Your Computer: Dell Inspiron 8200
Back to Contents Page
A Tour of Your Computer
Dell™ Inspiron™ 8200
Front View
Left Side View
Right Side View
Back View
Bottom View
Front View
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (1 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
1 display latch
9
battery bay
2 display
10 module bay
3 device status lights
11 touch pad/track stick
buttons
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (2 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
4 air vent
12 Dell AccessDirect buttons
5 keyboard status
lights
13 power button
6 keyboard
14 microphone
7 track stick
15 volume control buttons
8 touch pad
Display Latch— Keeps the display closed.
Display— The computer has a color LCD.
Device Status Lights
Turns on when you turn on the computer.
Turns on when the computer reads or writes data.
NOTICE: To avoid loss of data, never turn off
the computer while the
light is flashing.
Turns on steadily or blinks when the computer is in a
power management mode. It also blinks to indicate
battery charge status.
If the computer is connected to an electrical outlet, the
❍
❍
Solid green: The battery is charging.
Flashing green: The battery is fully charged.
If the computer is running on a battery, the
❍
❍
❍
light operates as follows:
light operates as follows:
Off: The battery is adequately charged (or the computer is turned off).
Flashing orange: The battery charge is low.
Solid orange: The battery charge is critically low.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (3 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
Air Vents— The computer uses an internal fan to create airflow through the vents,
which prevents the computer from overheating.
HINT: The computer turns on the fans when the computer gets hot. The fans
may make noise, which is normal and does not indicate a problem with the fans
or the computer
CAUTION: Do not block, push objects into, or allow dust to accumulate
in the air vents. Doing so can damage the computer or cause a fire.
Keyboard Status Lights— The green lights located above the keyboard indicate the
following:
Turns on when the numeric keypad is enabled
Turns on when the uppercase letter function is
enabled
Turns on when the scroll lock function is enabled
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (4 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
Keyboard— The keyboard includes a numeric keypad as well as the Microsoft®
Windows® logo key
.
Track Stick— Use the track stick and track stick buttons as you would use a mouse.
Touch Pad— Use the touch pad and touch pad buttons as you would use a mouse.
Battery Bay— When a battery is installed, you can use the computer without
connecting it to an electrical outlet.
Module Bay— You can install devices such as a CD drive, CD-RW drive, DVD drive, or
Dell TravelLite™ module in the module bay.
Touch Pad/Track Stick Buttons— Correspond to the left and right buttons on a
standard mouse.
Dell™ AccessDirect™ Buttons— Press the buttons to launch various resources, such
as your default Internet browser and e-mail program.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (5 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
Power Button— Press the power button to turn on the computer or to enter or exit
standby or hibernate mode.
If the computer stops responding, press and hold the power button until the computer
turns off completely (which may take about 4 seconds).
NOTICE: Turn off your computer by performing a Windows shutdown.
Otherwise, you may lose data.
Microphone— Allows you to record audio.
Volume Control Buttons— Increase or decrease the speaker volume with these
buttons. Alternatively, you can increase speaker volume by pressing
decrease speaker volume by pressing
and
.
You can enable or disable (mute) the integrated stereo speakers or external speakers
by pressing
. When you mute music, the computer may take a moment to
respond. Certain audio utilities installed on your computer also allow you to control
speaker volume. If no sound comes from the speakers, press
and check
the volume control buttons to make sure that the sound is not disabled.
Left Side View
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (6 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
1 fixed optical drive
2 S-video TV-out
connector
3 security cable slot
4 modem connector
5 network connector
6 speaker
Fixed Optical Drive— Accommodates devices such as a CD drive, DVD drive, CD-RW
drive, or CD-RW/DVD combo drive.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (7 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
S-Video TV-Out Connector
Connects your computer to a TV. Also
connects S/PDIF capable devices using
the TV/digital audio adapter cable.
Security Cable Slot— Lets you attach a commercially available antitheft device to
the computer. Instructions for installing antitheft devices are usually included with the
device.
NOTICE: Before you buy an antitheft device, ensure that it will work with the
security cable slot.
Modem Connector
Connect the telephone line to the modem
connector.
For information on using the modem, see
the online modem documentation
supplied with your computer.
Network Connector
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (8 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
Connects the computer to a network.
The light on the right flashes amber to
indicate network activity. The light on
the left turns red/orange when the
computer is connected to a 100-Mbps
network; the light turns green for a 10Mbps network or a wireless card.
For information on using the network
adapter, see the online network adapter
documentation supplied with your
computer.
NOTICE: The network connector is slightly larger than the modem connector.
Do not plug a telephone line into the network connector.
Speakers— Press the volume control buttons or volume control keyboard shortcuts to
adjust the volume of the integrated speakers.
Right Side View
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (9 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
1
speaker
5
IEEE 1394 connector
2
security cable slot
6
PC Card slot
3
hard drive bay
7
audio connectors
4
infrared sensor
8
air vents
Speakers— Press the volume control buttons or volume control keyboard shortcuts to
adjust the volume of the integrated speakers.
Security Cable Slot— Lets you attach a commercially available antitheft device to
the computer. Instructions for installing antitheft devices are usually included with the
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (10 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
device.
NOTICE: Before you buy an antitheft device, ensure that it will work with the
security cable slot.
Hard Drive— Reads and writes data on a hard disk.
Infrared Sensor— The infrared sensor lets you transfer files from your computer to
another infrared-compatible device without using cable connections.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (11 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
IEEE 1394 Connector— Use this connector to attach devices supporting IEEE 1394
high-speed transfer rates, such as some digital cameras and video cameras.
PC Card Slot— Has two connectors that support various types of PC Cards, including
modems and network adapters.
Audio Connectors
Attach record/playback devices, such as cassette players and CD players, to the
connector.
Attach headphones or speakers to the
Attach a microphone to the
connector.
connector.
Air Vents— The computer uses an internal fan to create airflow through the vents,
which prevents the computer from overheating.
HINT: The computer turns on the fans when the computer gets hot. The fans
may make noise, which is normal and does not indicate a problem with the fans
or the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (12 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
CAUTION: Do not block, push objects into, or allow dust to accumulate
in the air vents. Doing so can damage the computer or cause a fire.
Back View
NOTICE: To avoid damaging the computer, wait 5 seconds after turning off the
computer before you disconnect an external device.
CAUTION: Do not block, push objects into, or allow dust to accumulate
in the air vents. Doing so can damage the computer or cause a fire.
1 air vents
5 docking connector
2 AC adapter connector
6 parallel connector
3 PS/2 connector
7 serial connector
4 video connector
8 USB connectors (2)
Air Vents— The computer uses an internal fan to create airflow through the vents,
which prevents the computer from overheating.
HINT: The computer turns on the fans when the computer gets hot. The fans
may make noise, which is normal and does not indicate a problem with the fans
or the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (13 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
CAUTION: Do not block, push objects into, or allow dust to accumulate
in the air vents. Doing so can damage the computer or cause a fire.
HINT: Use only the 90-watt AC adapter supplied with the computer.
AC Adapter Connector— Attach the 90-watt AC adapter to the computer.
The AC adapter converts AC power to the DC power required by the computer. You
can connect the AC adapter with your computer turned either on or off.
CAUTION: The AC adapter works with electrical outlets worldwide.
However, power connectors and power strips vary among countries.
Using an incompatible cable or improperly connecting the cable to the
power strip or electrical outlet may cause fire or equipment damage.
NOTICE: When you disconnect the AC adapter from the computer, grasp the
adapter cable connector, not the cable itself, and pull firmly but gently to avoid
damaging the cable.
PS/2 Connector
HINT: You can use the integrated keyboard and an external keyboard at the
same time. When you attach a PS/2 keyboard or PS/2 numeric keypad, the
integrated keypad is disabled.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (14 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
Connects PS/2-compatible devices,
such as a mouse, keyboard, or
external numeric keypad.
Shut down the computer before
attaching or removing a PS/2compatible device. If the device does
not work, install the device drivers
from the floppy disk or CD that came
with the device, and restart the
computer.
Video Connector
Connects an external monitor.
Docking Connector
HINT: Docking devices may not be available in all countries.
Connects the optional docking device.
A docking device allows you to easily
use external devices with your
computer, such as an external
keyboard, mouse, and monitor.
See the documentation that came with
your docking device for additional
information.
Parallel Connector
Connects a parallel device, such as a
printer.
Serial Connector
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (15 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
Connects serial devices, such as a
mouse or handheld device.
USB Connector
Connects USB devices, such as a
mouse, keyboard, or printer.
Bottom View
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (16 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
1 memory module and
modem cover
2 device release latches
3 Mini PCI card cover
4 docking device latch
Memory Module and Modem Cover— Protects the memory module(s) and the
modem daughter card.
Device Release Latches— Press and hold a release latch to remove a device in the
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (17 of 18) [2/28/2004 7:40:13 AM]
A Tour of Your Computer: Dell Inspiron 8200
module bay.
Mini PCI card cover— Covers the compartment that contains the optional Mini PCI
card.
Docking Device Latch— Latches onto the docking device.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/tour.htm (18 of 18) [2/28/2004 7:40:13 AM]
Solving Problems: Dell Inspiron 8200
Back to Contents Page
Solving Problems
Dell™ Inspiron™ 8200
Accessing Help
Power Problems
Start-Up Error Messages
Video and Display Problems
Sound and Speaker Problems
Printer Problems
Modem and Internet Connection Problems
Scanner Problems
Touch Pad or Mouse Problems
External Keyboard Problems
Unexpected Characters
Drive Problems
PC Card Problems
Network Problems
Error Messages
General Program Problems
E-Mail Problems
Resolving Other Technical Problems
If Your Computer Gets Wet
If You Drop or Damage Your Computer
Accessing Help
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (1 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
To access the Tell Me How help file
1. Click the Start button and then click Help and Support.
2. Click User and system guides and then click User's guides.
3. Click Tell Me How.
To access help
1. Click the Start button and then click Help and Support.
2. Type a word or phrase that describes your problem and then click the
arrow icon.
3. Click the topic that describes your problem.
4. Follow the instructions shown on the screen.
Power Problems
HINT: See the Tell Me How help file for information on standby mode.
Check the power light— When the power light is lit or blinking, the
computer has power. If the power light is blinking, the computer is in
standby mode—press the power button to exit standby mode. If the light is
off, press the power button to turn on the computer.
Charge the battery— The battery charge may be depleted.
1. Reinstall the battery.
2. Use the AC adapter to connect the computer to an electrical outlet.
3. Turn on the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (2 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Check the battery status light— If the battery status light flashes orange
or is a steady orange, the battery charge is low or depleted. Connect the
computer to an electrical outlet.
If the battery status light flashes green and orange, the battery is too hot
to charge. Turn off the computer, disconnect the computer from the
electrical outlet, and then let the battery and computer cool to room
temperature.
If the battery status light rapidly flashes orange, the battery may be
defective. Contact Dell (see "Contacting Dell" in the Dell™ Owner's Manual
that came with your computer).
Test the electrical outlet— Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.
Check the AC adapter— Check the AC adapter cable connections. If the
AC adapter has a light, ensure that the light is on.
Connect the computer directly to an electrical outlet— Bypass power
protection devices, power strips, and the extension cable to verify that the
computer turns on.
Eliminate possible interference— Turn off nearby fans, fluorescent
lights, halogen lamps, or other appliances.
Adjust the Power Properties— See the Tell Me How help file or search
for the keyword standby in the Help and Support Center. To access the help
file, see "Accessing Help."
Reseat the memory modules— If the computer power light turns on but
the display remains blank, reseat the memory modules.
Ensuring Sufficient Power for Your Computer
Your computer’s Intel® Mobile Pentium®4 microprocessor requires more power than
the microprocessors used in Dell’s earlier portable computers. Your computer is
designed to use the 90-W AC adapter and the 4400-mAh battery that shipped with it;
for optimum system performance, you should always use these components.
The 70-W AC adapters used in some of Dell’s earlier portable computers can be used
with your computer, but they will decrease system performance. Likewise, you can
use the 3800-mAh and 3600-mAh batteries from earlier Dell computers, but these
lesser-capacity batteries will discharge faster. Using less-powerful AC adapters or
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (3 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
batteries may cause you to receive a WARNING or a SYSTEM CONFIGURATION ERROR
message similar to the following:
WARNING: 70 Watt AC adapter detected. System will not be capable of
running in full performance without a 90 Watt AC adapter.
NOTICE: Do not use an AC adapter rated under 70 W or a battery rated under
3600 mAh in this computer. To do so will cause indeterminate results, including
data loss and/or immediate system shutdown. Using one of these lowerpowered components will cause a SYSTEM CONFIGURATION ERROR message to
appear.
Docking Power Considerations
HINT: If you want to upgrade the AC adapter for an existing Dell docking
device, you can purchase an additional 90-W AC adapter from Dell.
The 4400-mAh battery supplied with the computer is not designed to support both the
computer and a docking device. For optimum system performance, always use the 90W AC adapter (with or without a battery installed) when using the computer in a
docking device. You can identify the 90-W adapter by the lighter-gray tip on the
connector that plugs into the computer or docking device.
Using a 70-W AC adapter will cause the computer to run in reduced-performance
mode and may display an AC adapter WARNING message.
Docking While the Computer Is Running
To accommodate the initial power surge when connecting to a docking device with the
computer running in normal (non-power conservation) mode, a 90- or 70-W AC
adapter and at least one battery (a 4400- or 3800-mAh battery) must be installed in
the computer. The computer will then run in either full-performance or reducedperformance mode, depending on the battery/AC adapter combination installed.
AC Power Loss While the Computer Is Docked
If a computer loses AC power while docked, the computer immediately goes into lowperformance mode and displays an appropriate WARNING message.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (4 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Start-Up Error Messages
Operating system not found—
Contact Dell for technical assistance (see "Contacting Dell" in the Dell
Owner's Manual that came with your computer).
Insert bootable media—
The operating system is trying to boot to a nonbootable floppy disk or CD.
Insert a bootable floppy disk or CD.
Non-system disk error—
A floppy disk is in the floppy drive. Remove the floppy disk and restart the
computer.
Video and Display Problems
If the display is blank
HINT: If you are using a program that requires a higher resolution than your
computer supports, Dell recommends that you attach an external monitor to
your computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (5 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Check the
When the
●
●
●
light—
light is blinking, the computer has power.
If the
light is blinking, the computer is in standby mode—press
the power button to exit standby mode.
If the
light is off, press the power button.
If the
light is on, your power management settings may have
caused the display to turn off. Try pressing any key or move the
cursor to exit standby mode.
Check the battery—
If you are using a battery to power your computer, the battery charge may
be depleted. Connect the computer to an electrical outlet using the AC
adapter, and turn on the computer.
Test the electrical outlet—
Ensure that the electrical outlet is working by testing it with another device,
such as a lamp.
Check the AC adapter—
Check the AC adapter cable connections. If the AC adapter has a light,
ensure that it is on.
Connect the computer directly to an electrical outlet—
Bypass power protection devices, power strips, and the extension cable to
verify that the computer turns on.
Adjust the Power Properties—
See the Tell Me How help file, or search for the keyword standby in the
Microsoft® Windows® Help and Support Center. To access the help file, see
"Accessing Help."
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (6 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Switch the video image—
If your computer is attached to an external monitor, press
switch the video image to the display.
to
If the display is difficult to read
Adjust the brightness—
See the Tell Me How help file for instructions on adjusting the brightness.
To access the help file, see "Accessing Help."
Move the subwoofer away from the computer or monitor—
If your external speaker system includes a subwoofer, ensure that the
subwoofer is at least 60 cm (2 ft) away from the computer or external
monitor.
Eliminate possible interference—
Turn off nearby fans, fluorescent lights, halogen lamps, or other appliances.
Rotate the computer to face a different direction—
Eliminate sunlight glare, which can cause poor picture quality.
Adjust the Windows display settings
1.
2.
3.
4.
Click the Start button and then click Control Panel.
Click Appearance and Themes.
Click the area you want to change or click the Display icon.
Try different settings for Color quality and Screen resolution.
See "Error Messages"—
If an error message appears, see "Error Messages."
If only part of the display is readable
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (7 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Connect an external monitor
1. Turn off your computer and connect an external monitor to the
computer.
2. Turn on the computer and the monitor and adjust the monitor
brightness and contrast controls.
If the external monitor works, the computer display or video controller may
be defective. Contact Dell (see "Contacting Dell" in the Dell Owner's Manual
that came with your computer).
Sound and Speaker Problems
If you have a problem with integrated speakers
Adjust the Windows® volume control— Double-click the speaker icon in
the lower-right corner of your screen. Ensure that the volume is turned up
and that the sound is not muted. Adjust the volume, bass, or treble controls
to eliminate distortion.
Adjust the volume using keyboard shortcuts— See "Using the
Keyboard and Touch Pad" in the Tell Me How help file. Press
disable (mute) or reenable the integrated speakers.
to
Reinstall the sound (audio) driver— See "Reinstalling Drivers and
Utilities."
If you have a problem with external speakers
HINT: The volume control in some MP3 players overrides the Windows volume
setting. If you have been listening to MP3 songs, make sure that you did not
turn the player volume down or off.
Check the speaker cable connections— See the setup diagram supplied
with the speakers.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (8 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Test the electrical outlet— Ensure that the electrical outlet is working by
testing it with another device, such as a lamp.
Ensure that the speakers are turned on— See the setup diagram
supplied with the speakers.
Adjust the Windows volume control— Double-click the speaker icon in
the lower-right corner of your screen. Ensure that the volume is turned up
and that the sound is not muted. Adjust the volume, bass, or treble controls
to eliminate distortion.
Test the speakers— Plug the speaker audio cable into the line-out
connector on the computer. Ensure that the headphone volume control is
turned up. Play a music CD.
Run the speaker self-test— Some speaker systems have a self-test
button on the subwoofer. See the speaker documentation for self-test
instructions.
Eliminate possible interference— Turn off nearby fans, fluorescent
lights, or halogen lamps to check for interference.
Reinstall the sound (audio) driver— See "Reinstalling Drivers and
Utilities."
Printer Problems
Check the printer cable connections—
Ensure that the printer cable is properly connected to the computer.
Test the electrical outlet—
Ensure that the electrical outlet is working by testing it with another device,
such as a lamp.
Ensure that the printer is turned on—
See the documentation supplied with the printer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (9 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Verify that Windows® recognizes the printer
1.
2.
3.
4.
Click the Start button.
Click Control Panel.
Click Printers and Other Hardware.
Click View installed printers or fax printers. If the printer model is
listed, right-click the printer icon.
5. Click Properties, and then click the Ports tab. Ensure that the Print
to the following port(s): setting is LPT1 (Printer Port).
Reinstall the printer driver— See "Reinstalling Drivers and Utilities."
Modem and Internet Connection Problems
NOTICE: Connect the modem to an analog telephone wall jack only. Connecting
the modem to a digital telephone network damages the modem.
NOTICE: Modem and network connectors look similar. Do not plug a telephone
line into the network connector.
HINT: If you can connect to your Internet service provider (ISP), your modem
is functioning properly. If you are sure that your modem is working properly and
you still experience problems, contact your ISP.
Check the telephone wall jack—
Disconnect the telephone line from the modem and connect it to a
telephone. Listen for a dial tone. Ensure that you have touchtone telephone
service. Try connecting the modem to a different telephone wall jack.
Slow connection speeds can be caused by telephone noise as well as by
telephone line or network conditions. Contact your telephone company or
network administrator for more information.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (10 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Connect the modem directly to the telephone wall jack—
If you have other telephone devices sharing the line, such as an answering
machine, fax machine, surge protector, or line splitter, then bypass them
and use the telephone line to connect the modem directly to the telephone
wall jack.
Check the connection—
Verify that the telephone line is connected to the modem.
Check the telephone line—
Try using a different telephone line. If you are using a line that is 3 m (10
ft) or more in length, try a shorter one.
Irregular dial tone —
If you have voice mail service, you might hear an irregular dial tone when
you have messages. Contact your telephone company for instructions on
restoring a dial tone.
Turn off call waiting (catch-phone)—
See your telephone directory for instructions on deactivating this feature.
Then adjust the dial-up networking connection properties.
1. Click the Start button and click Control Panel.
2. Click Printers and Other Hardware, click Phone and Modem
Options, click the Dialing Rules tab, and then click Edit....
3. In the Edit Location window, ensure that To disable call waiting,
dial: is checked, and then select the proper code as listed in your
telephone directory.
4. Click Apply and click OK.
5. Close the Phone and Modems Options window.
6. Close the Control Panel window.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (11 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Verify that the modem is communicating with Windows
1.
2.
3.
4.
5.
6.
Click the Start button and click Control Panel.
Click Printers and Other Hardware.
Click Phone and Modem Options.
Click the Modems tab.
Click the COM port for your modem.
Click Properties, click the Diagnostics tab, and then click Query
Modem to verify that the modem is communicating with Windows.
If all commands receive responses, the modem is operating properly.
Scanner Problems
Check the power cable connection—
Ensure that the scanner power cable is firmly connected to a working
electrical power source and that the scanner is turned on.
Check the scanner cable connection—
Ensure that the scanner cable is firmly connected to the computer and to
the scanner.
Unlock the scanner—
Ensure that your scanner is unlocked if it has a locking tab or button.
Reinstall the scanner driver—
See the scanner documentation for instructions.
Touch Pad or Mouse Problems
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (12 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Check the touch pad settings
1. Click the Start button, click Control Panel, and then click Printers
and Other Hardware.
2. Click Mouse.
3. Try adjusting the settings.
Check the mouse cable—
Shut down the computer. Disconnect the mouse cable and check it for
damage. For PS/2 cables, check the cable connector for bent or broken
pins. Firmly reconnect the cable.
If you are using a mouse extension cable, disconnect it and connect the
mouse directly to the computer.
To verify that the problem is with the mouse, check the touch pad
1.
2.
3.
4.
Turn off the computer.
Disconnect the mouse.
Turn on the computer.
At the Windows desktop, use the touch pad to move the cursor
around, select an icon, and open it.
If the touch pad operates correctly, the mouse may be defective.
Reinstall the touch pad driver—
See "Reinstalling Drivers and Utilities."
External Keyboard Problems
HINT: When you attach an external keyboard, the integrated keyboard remains
fully functional.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (13 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Check the keyboard cable—
Shut down the computer. Disconnect the keyboard cable and check it for
damage. For PS/2 cables, check the cable connector for bent or broken
pins. Firmly reconnect the cable.
If you are using a keyboard extension cable, disconnect it and connect the
keyboard directly to the computer.
Check the external keyboard
1. Turn off the computer, wait 1 minute, and turn it on again.
2. Verify that the numbers, capitals, and scroll lock lights on the
keyboard blink during the boot routine.
3. From the Windows® desktop, click the Start button, point to
Programs, point to Accessories, and click Notepad.
4. Type some characters on the external keyboard and verify that they
appear on the display.
If you cannot verify these steps, you may have a defective external
keyboard.
To verify that the problem is with the external keyboard, check the
integrated keyboard
1.
2.
3.
4.
Turn off the computer.
Disconnect the external keyboard.
Turn on the computer.
From the Windows desktop, click the Start button, point to
Programs, point to Accessories, and click Notepad.
5. Type some characters on the integrated keyboard and verify that they
appear on the display.
If the characters appear now but did not with the external keyboard, you
may have a defective external keyboard. Contact Dell (see "Contacting Dell"
in the Dell Owner's Manual that came with your computer).
Unexpected Characters
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (14 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Disable the numeric keypad— Press
to disable the numeric keypad
if numbers are displayed instead of letters. Verify that the numbers lock
light is not lit.
Drive Problems
HINT: For information on saving files to a floppy disk, see the Tell Me How help
file. To access the help file, see "Accessing Help."
If you cannot save a file to a floppy disk drive
Ensure that Windows® recognizes the drive—
Click the Start button and click My Computer. If the drive is not listed,
perform a full scan with your antivirus software to check for and remove
viruses. Viruses can sometimes prevent Windows from recognizing the
drive. Insert a bootable disk and restart the computer. Verify that the
light is blinking, indicating normal operation.
Ensure that the disk is not write-protected— You cannot save data to a
write-protected disk.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (15 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Try another floppy disk— Insert another disk to eliminate the possibility
that the original disk is defective.
Reinstall the drive
1. Save and close any open files, exit any open programs, and shut
down the computer.
2. If the drive is installed in the module bay, remove the drive.
If the drive is a fixed drive, review "Check the drive for errors."
3. Reinstall the drive.
4. Turn on the computer.
Clean the drive— See "Cleaning Your Computer" in the Tell Me How help
file for instructions. To access the help file, see "Accessing Help."
If you cannot play a CD, CD-RW, or DVD
HINT: Because of different worldwide file types, not all DVD titles work in all
DVD drives.
High-speed CD drive vibration is normal and may cause noise. This noise does not
indicate a defect with the drive or the CD.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (16 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Ensure that Windows® recognizes the drive— Click the Start button
and click My Computer. If the drive is not listed, perform a full scan with
your antivirus software to check for and remove viruses. Viruses can
sometimes prevent Windows from recognizing the drive. Insert a bootable
disk and restart the computer. Verify that the
indicating normal operation.
light is blinking,
Try another disc— Insert another disc to eliminate the possibility that the
original disc is defective.
Adjust the Windows volume control— Double-click the speaker icon in
the lower-right corner of your screen. Ensure that the volume is turned up
and that the sound is not muted.
Identify the disc that is not playing— If you have one CD, CD-RW, or
DVD in the fixed optical drive device and one in the module bay device:
1. Click the Start button and click My Computer.
2. Double-click the drive letter of the device that you are verifying.
Reinstall the drive
1. Save and close any open files, exit any open programs, and shut
down the computer.
2. If the drive is installed in the module bay, remove the drive.
If the drive is a fixed drive, review "Check the drive for errors."
3. Reinstall the drive.
4. Turn on the computer.
Clean the drive or disc— See "Cleaning Your Computer" in the Tell Me
How help file for instructions. To access the help file, see "Accessing Help."
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (17 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Check the drive for errors
If the drive is a fixed optical drive:
1. Remove the hard drive and floppy drive.
2. Insert the Drivers and Utilities CD for your computer and turn on the
computer.
3. Verify that the
light is blinking, indicating normal operation.
If you cannot eject the CD, CD-RW, or DVD drive
tray
1. Ensure that the computer is turned off.
2. Straighten a paper clip and insert one end into the eject hole at the
front of the drive; push firmly until the tray is partially ejected.
3. Gently pull out the tray until it stops.
If you hear an unfamiliar scraping or grinding
sound
●
●
Ensure that the sound is not caused by the program that is running.
Ensure that the disk or disc is inserted properly.
If the CD-RW drive stops writing
Disable standby mode in Windows before writing to a CD-RW—
Search for the keyword standby in the Windows Help and Support Center.
To access the help file, see "Accessing Help."
Change the write speed to a slower rate— See the help files for your
CD creation software.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (18 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Exit all other open programs— Exiting all other open programs before
writing to the CD-RW may alleviate the problem.
If you have problems with a hard drive
Allow the computer to cool before turning it on— A hot hard drive may
prevent the operating system from starting. Try allowing the computer to
return to room temperature before turning it on.
Check the drive for errors
1. Click the Start button and click My Computer.
2. Right-click the drive letter (local disk) that you want to scan for
errors, and then click Properties.
3. Click the Tools tab.
4. Under Error-checking, click Check Now.
5. Click Start.
PC Card Problems
Check the PC Card—
Ensure that the PC Card is properly inserted into the connector.
Ensure that the card is recognized by Windows®—
Double-click the Unplug or Eject Hardware icon in the Windows taskbar.
Ensure that the card is listed.
If you have problems with a Dell-provided PC Card—
Contact Dell (see "Contacting Dell" in the Dell Owner's Manual that came
with your computer).
If you have problems with a PC Card not provided by Dell—
Contact the PC Card manufacturer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (19 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Network Problems
Check the network cable connector—
Ensure that the network cable connector is firmly connected to the
connector on the computer and the network wall jack.
Check the network lights on the network connector—
A green or red-orange status light indicates that the network connection is
active. If this status light is not lit, try replacing the network cable. The
amber light indicates that the network adapter driver is loaded and the
adapter is detecting activity.
Restart the computer—
Try to log on to the network again.
Contact your network administrator—
Verify that your network settings are correct and that the network is
functioning.
Error Messages
If the message is not listed, see the documentation for the operating system or the
program that was running at the time the message appeared.
The file being copied is too large for the destination drive—
The file that you are trying to copy is too large to fit on the disk, or the disk
is too full. Try copying the file to a different disk or use a larger capacity
disk.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (20 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
A filename cannot contain any of the following characters: \ / : * ?
"< > |—
Do not use these characters in filenames.
Insert bootable media—
The operating system is trying to boot to a nonbootable floppy disk or CD.
Insert a bootable floppy disk or CD.
Non-system disk or disk error—
A floppy disk is in the floppy drive. Remove the floppy disk and restart the
computer.
Not enough memory or resources. Exit some programs and try
again—
You have too many programs open. Close all windows and open the
program that you want to use.
Operating system not found—
Contact Dell (see "Contacting Dell" in the Dell Owner's Manual that came
with your computer).
A required .DLL file was not found—
The program that you are trying to open is missing an essential file.
Remove and then reinstall the program.
1.
2.
3.
4.
5.
6.
Click the Start button.
Click Control Panel.
Click Add or Remove Programs.
Select the program you want to remove.
Click the Change or Remove Program icon.
See the program documentation for installation instructions.
x:\ is not accessible. The device is not ready—
Insert a disk into the drive and try again.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (21 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
General Program Problems
A program crashes
HINT: Software usually includes installation instructions in its documentation or
on a floppy disk or CD.
See the software documentation—
Many software manufacturers maintain websites with information that may
help you solve the problem. Ensure that you properly installed and
configured the program. Reinstall the program if necessary.
A program stops responding
End the program
1. Simultaneously press
.
2. Click the Applications tab, and then select the program that is no
longer responding.
3. Click End Task.
A solid blue screen appears
Turn the computer off—
If the computer does not respond to a keystroke or a proper shutdown,
press the power button until the computer turns off. Press the power button
again to restart the computer. The solid blue screen appears because you
were not able to perform a proper Windows® shutdown. ScanDisk
automatically runs during the start-up process. Follow the instructions on
the screen.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (22 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
Error messages appear
Review "Error Messages"—
Look up the message and take the appropriate action. See "Check the drive
for errors" and the software documentation.
E-Mail Problems
Ensure that you are connected to the Internet—
With the Outlook Express e-mail program open, click File. If Work Offline
has a check mark next to it, click the check mark to remove it and connect
to the Internet.
Resolving Other Technical Problems
Go to the Dell Support website—
Go to support.dell.com for help with general usage, installation, and
troubleshooting questions.
E-mail Dell—
Go to support.dell.com and then click E-Mail Dell in the Communicate
list. Send an e-mail message to Dell about your problem; you can expect to
receive an e-mail message from Dell within hours.
Contact Dell—
If you cannot solve your problem using the Dell™ support website or e-mail
service, contact Dell for technical assistance (see "Contacting Dell" in the
Dell Owner's Manual that came with your computer).
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (23 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
If Your Computer Gets Wet
CAUTION: Perform this procedure only after you are certain that it is
safe to do so. If the computer is connected to an electrical outlet, Dell
recommends that you turn off AC power at the circuit breaker before
attempting to remove the power cables from the electrical outlet. Use
the utmost caution when removing wet cables from a live power source.
1. Turn off the computer, disconnect the AC adapter from the computer, and then
disconnect the AC adapter from the electrical outlet.
2. Turn off any attached external devices, and disconnect them from their power
sources and then from the computer.
3. Ground yourself by touching one of the metal connectors on the back of the
computer.
4. Remove the module bay device and any installed PC Cards, and place them in a
safe place to dry.
5. Remove the battery.
6. Wipe off the battery and put it in a safe place to dry.
7. Remove the hard drive.
8. Remove the memory module(s).
9. Open the display and place the computer right-side up across two books or
similar props to let air circulate all around it. Let the computer dry for at least
24 hours in a dry area at room temperature.
NOTICE: Do not use artificial means, such as a hair dryer or a fan, to speed the
drying process.
CAUTION: To help prevent electrical shock, verify that the computer is
thoroughly dry before continuing with the rest of this procedure.
10. Ground yourself by touching one of the metal connectors on the back of the
computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (24 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
11. Replace the memory module(s), the memory module cover, and the screw(s).
12. Replace the hard drive.
13. Replace the module bay device and any PC Cards you removed.
14. Replace the battery.
15. Turn on the computer and verify that it is working properly.
If the computer does not start, or if you cannot identify the damaged components,
contact Dell (see "Contacting Dell" in the Dell Owner's Manual that came with your
computer).
If You Drop or Damage Your Computer
1. Save and close any open files, exit any open programs, and shut down the
computer.
2. Disconnect the AC adapter from the computer and from the electrical outlet.
3. Turn off any attached external devices, and disconnect them from their power
sources and then from the computer.
4. Remove and reinstall the battery.
5. Turn on the computer.
If the computer does not start, or if you cannot identify the damaged components,
contact Dell (see "Contacting Dell" in the Dell Owner's Manual that came with your
computer).
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (25 of 26) [2/28/2004 7:40:15 AM]
Solving Problems: Dell Inspiron 8200
file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (26 of 26) [2/28/2004 7:40:15 AM]
Using Dell Diagnostics: Dell Inspiron 8200
Back to Contents Page
Using Dell Diagnostics
Dell™ Inspiron™ 8200
When to Use the Dell Diagnostics
Features of the Dell Diagnostics
Starting the Dell Diagnostics
Advanced Testing
Confirming the System Configuration Information
When to Use the Dell Diagnostics
Whenever a major component or device in your computer does not function properly,
you may have a component failure. If you are experiencing a problem with your
computer, Dell recommends that you perform the checks in "Solving Problems" and
run the Dell Diagnostics before you call Dell for technical assistance.
As long as the microprocessor and the display, keyboard, and CD or DVD drive are
working, you can use the Dell Diagnostics. Running the Dell Diagnostics may help you
to resolve the problem yourself quickly without having to contact Dell for assistance.
If you are experienced with computers and know what component(s) you need to test,
simply select the appropriate diagnostic test group(s) or subtest(s). If you are unsure
about how to begin diagnosing a problem, see "Starting the Dell Diagnostics" and
"Advanced Testing."
Features of the Dell Diagnostics
The Dell Diagnostics helps you check your computer's hardware without any additional
equipment and without destroying any data. By using the diagnostics, you can have
confidence in your computer's operation. And if you find a problem you cannot solve
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (1 of 8) [2/28/2004 7:40:16 AM]
Using Dell Diagnostics: Dell Inspiron 8200
by yourself, the diagnostic tests can provide you with important information you will
need when talking to Dell's service and support personnel. If you are experiencing a
problem with your computer, Dell recommends that you perform the checks in
"Solving Problems" and run the Dell Diagnostics before you call Dell for technical
assistance.
NOTICE: Use the Dell Diagnostics to test only your Dell™ computer. Using this
program with other computers may cause incorrect computer responses or
result in error messages.
The diagnostic test groups or subtests also have these helpful features:
●
●
●
●
●
●
●
Options that let you perform quick checks or extensive tests on one or all
devices
An option that allows you to choose the number of times a test group or subtest
is repeated
The ability to display test results or to save them in a file
Options to temporarily suspend testing if an error is detected, or to terminate
testing when an adjustable error limit is reached
Extensive online Help screens that describe the tests and how to run them
Status messages that inform you whether test groups or subtests were
completed successfully
Error messages that appear if any problems are detected
Starting the Dell Diagnostics
HINT: Dell recommends that you print these procedures before you begin.
Before you can start the Dell Diagnostics you need to reset your boot sequence and
boot from the Drivers and Utilities CD for your computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (2 of 8) [2/28/2004 7:40:16 AM]
Using Dell Diagnostics: Dell Inspiron 8200
HINT: You can only boot from a CD, CD-RW, or DVD drive installed as a fixed
drive. You cannot boot from a drive installed in the module bay.
1. Turn off the computer.
2. If the computer is docked, undock the computer.
3. Ensure that the computer is connected to an electrical outlet.
4. Turn on the computer with the Drivers and Utilities CD in the CD, CD-RW, or
DVD drive.
5. Press
to enter the system setup program as soon as the Dell logo screen
appears, and before the Microsoft® Windows® logo screen appears.
6. Select the Boot Order page of the system setup program. Make a note of the
device currently set as the first (top) boot device, and then set the first three
devices in the boot sequence in the following order:
●
Diskette Drive
●
CD/DVD/CD-RW drive
●
Internal HDD
7. Save your changes and press
to exit the system setup program and
restart the computer to boot from the CD.
The computer starts and automatically begins to run the Dell Diagnostics.
8. When you have completed running diagnostics, remove the Drivers and Utilities
CD.
9. When the computer restarts, press
as soon as the Dell logo screen
appears, and before the Windows logo screen appears.
10. In the system setup program, select the Boot Order page and reset the boot
sequence to the original order.
11. Press
to exit the system setup program and restart Microsoft Windows.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (3 of 8) [2/28/2004 7:40:16 AM]
Using Dell Diagnostics: Dell Inspiron 8200
12. Remove the CD from the CD, CD-RW, or DVD drive.
When you start the diagnostics, the Dell logo screen appears, followed by a message
telling you that the diagnostics is loading. After the diagnostics loads, the
Diagnostics Menu appears.
To select an option from this menu, highlight the option and press
, or
press the key that corresponds to the highlighted letter in the option you choose.
Diagnostics Menu
Option
Function
Test All Devices
Performs extensive diagnostic tests or quick diagnostic
tests on all devices.
Test One Device
Performs extensive diagnostic tests or quick diagnostic
tests on one device after you select it from a list of device
groups. After you select Test One Device, press
more information about a test.
Advanced Testing
for
Allows you to modify the parameters of a test and select a
group of tests to perform. You can access online Help for
more information about Advanced Testing.
Information and Results Provides test results, test errors, version numbers of the
subtests used by the Dell Diagnostics, and additional help
on the Dell Diagnostics.
Program Options
Allows you to change the settings of the Dell Diagnostics.
Exit to MS-DOS
Exits to the MS-DOS® prompt.
For a quick check of your computer, select Quick Tests from the Test All Devices or
Test One Device option. Quick Tests runs only the subtests that do not require user
interaction and that do not take a long time to run. Dell recommends that you choose
Quick Tests first to increase the odds of tracing the source of the problem quickly.
For a thorough check of your computer, select Extended Tests from the Test All
Devices option.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (4 of 8) [2/28/2004 7:40:16 AM]
Using Dell Diagnostics: Dell Inspiron 8200
To check a particular area of your computer, select Extended Tests from the Test
One Device option, or select the Advanced Testing option to customize your
test(s).
Advanced Testing
When you select Advanced Testing from the Diagnostics Menu, the following
screen appears, listing the diagnostic test device groups and devices of the selected
device group, and it allows you to select categories from a menu. Press the arrow
keys or
to navigate the screen.
Advanced Testing Main Screen
HINT: The test groups reflect the configuration of your computer.
Information in the Advanced Testing screen is presented as follows:
●
●
●
On the left side of the screen, the Device Groups area lists the diagnostic test
groups in the order they will run if you select All from the Run tests menu
category. Press the up- or down-arrow key to highlight a test device group.
On the right side of the screen, the Devices for Highlighted Group area lists
the computer's currently detected hardware and some of the relevant settings.
Two lines at the bottom of the screen make up the menu area (see "Advanced
Testing Help Menu"). The first line lists the categories you can select; press the
left- or right-arrow key to highlight a menu category. The second line gives
information about the category currently highlighted.
Advanced Testing Help Menu
For more information on using the Advanced Testing option:
1. Press
.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (5 of 8) [2/28/2004 7:40:16 AM]
Using Dell Diagnostics: Dell Inspiron 8200
2. Highlight the Help category and press
, or press the key that
corresponds to the highlighted letter in the category you choose.
Advanced Testing Help Categories
Help Category Description
Menu
Provides descriptions of the main menu screen area, the Device
Groups, and the different diagnostic menus and commands and
instructions on how to use them.
Keys
Explains the functions of the all of the keystrokes that can be used
in Dell Diagnostics.
Device Group
Describes the test group that is presently highlighted in the Device
Groups list on the main menu screen. It also provides reasoning for
using some tests.
Device
Describes the function and purpose of the highlighted device in the
Device Groups. For example, the following information appears
when you select the Device Help category for Diskette in the
Device Groups list:
Diskette
Drive A
The diskette disk drive device reads and writes data to
and from diskettes. Diskettes are flexible recording
media, sometimes contained in hard shells. Diskette
recording capacities are small and access times are slow
relative to hard disk drives, but they provide a
convenient means of storing and transferring data.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (6 of 8) [2/28/2004 7:40:16 AM]
Using Dell Diagnostics: Dell Inspiron 8200
Test
Provides a thorough explanation of the test procedure of each
highlighted test group subtest. An example of the Diskette subtest
floppy drive Seek Test is as follows:
Diskette
Drive A - floppy drive Seek Test
This test verifies the drive's ability to position its
read/write heads. The test operates in two passes: first,
seeking from the beginning to ending cylinders
inclusively, and second, seeking alternately from the
beginning to ending cylinders with convergence towards
the middle.
Versions
Lists the version numbers of the subtests that are used by the Dell
Diagnostics.
Confirming the System Configuration
Information
When you boot your computer from your Drivers and Utilities CD, the diagnostics
checks your system configuration information and displays it in the Device Groups
area on the main screen.
The following sources supply this configuration information for the diagnostics:
●
●
●
The system configuration information settings (stored in NVRAM) that you
selected while using the system setup program
Identification tests of the microprocessor, the video controller, the keyboard
controller, and other key components
BIOS configuration information temporarily saved in RAM
Do not be concerned if the Device Groups area does not list the names of all the
components or devices you know are part of your computer. For example, you may
not see a printer listed, although you know one is attached to your computer. Instead,
the printer is listed as a parallel port. The computer recognizes the parallel port as
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (7 of 8) [2/28/2004 7:40:16 AM]
Using Dell Diagnostics: Dell Inspiron 8200
LPT1, which is an address that tells the computer where to send outgoing information
and where to look for incoming information. Because your printer is a parallel
communications device, the computer recognizes the printer by its LPT1 address and
identifies it as a parallel port. You can test your printer connection in the Parallel
Ports tests.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/diag.htm (8 of 8) [2/28/2004 7:40:16 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
Back to Contents Page
Reinstalling Drivers and Utilities
Dell™ Inspiron™ 8200
Reinstalling Drivers and Utilities
Resolving Software and Hardware Incompatibilities
Using Microsoft® Windows® System Restore
Reinstalling Drivers and Utilities
Dell ships your computer to you with required drivers and utilities already
installed—no further installation or configuration is needed.
NOTICE: The Drivers and Utilities CD may contain drivers for operating systems
that are not on your computer. Ensure that you are installing software
appropriate for your operating system.
To reinstall drivers for optional devices such as wireless communications, DVD drives,
and ZIP drives, you may need the CD and documentation that came with those
devices.
To reinstall a driver or utility from your Drivers and Utilities CD:
NOTICE: The Dell Support website, support.dell.com, and the Drivers and
Utilities CD provide approved drivers for Dell™ computers. If you install drivers
from other sources, your computer might not work correctly.
1. Save and close any open files, and exit any open programs.
2. Insert the Drivers and Utilities CD.
In most cases, the CD starts running automatically. If it does not, start
Microsoft® Windows® Explorer, click your CD drive directory to display the CD
contents, and then double-click the autocd.exe file. The first time that you run
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (1 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
the CD, it might prompt you to install setup files. Click OK, and follow the
instructions on the screen to continue.
3. From the Language pull-down menu in the toolbar, select your preferred
language for the driver or utility (if available).
A welcome screen appears.
4. Click Next. The CD automatically scans your hardware to detect some drivers
used by your computer.
After the CD completes the hardware scan, you can also detect other drivers and
utilities. Under Search Criteria, select the appropriate categories from the
System Model, Operating System, and Topic pull-down menus.
A link or links appear(s) for the specific drivers and utilities used by your
computer.
5. Click the link of a specific driver or utility to display information about the driver
or utility that you want to install.
6. Click the Install button (if present) to begin installing the driver or utility. At
the welcome screen, follow the screen prompts to complete the installation.
If no Install button is present, automatic installation is not an option. For
installation instructions, either see the appropriate instructions in the following
subsections, or click Extract, follow the extracting instructions, and read the
readme file.
If instructed to navigate to the driver files, click the CD directory on the driver
information window to display the files associated with that driver.
Manually Reinstalling Drivers for Windows XP
HINT: If you are reinstalling an infrared device driver, you must first enable the
infrared sensor in the system setup program before continuing with the driver
installation.
1. After extracting the driver files to your hard drive as described previously, click
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (2 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
the Start button, point to Settings, and click Control Panel.
2. Click the Start button and right-click My Computer.
3. Click Properties.
4. Click the Hardware tab and click Device Manager.
5. Double-click the type of device for which you are installing the driver (for
example, Modems or Infrared devices).
6. Double-click the name of the device for which you are installing the driver.
7. Click the Driver tab, and then click Update Driver.
8. Select Install from a list or specific location (Advanced), and then click
Next.
9. Click Browse, and browse to the location to which you previously extracted the
driver files.
10. When the name of the appropriate driver appears, click Next.
11. Click Finish and restart your computer.
Using Windows XP Device Driver Rollback
If you install a new device driver that causes system instability, you can use Windows
XP Device Driver Rollback to replace the new device driver with the previously
installed version of the device driver. If you cannot reinstall your previous driver by
using Device Driver Rollback, then use System Restore (see "Using Microsoft®
Windows® System Restore") to return your operating system to its previous operating
state before you installed the new device driver. To use Device Driver Rollback:
1. Click the Start button and right-click My Computer.
2. Click Properties.
3. Click the Hardware tab and click Device Manager.
4. In the Device Manager window, right-click the device for which the new driver
was installed and then click Properties.
5. Click the Drivers tab.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (3 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
6. Click Roll Back Driver.
Resolving Software and Hardware
Incompatibilities
In the Microsoft® Windows® XP operating system, IRQ conflicts occur if a device
either is not detected during the operating system setup or is detected but incorrectly
configured. To check for IRQ conflicts on your computer:
1. Click the Start button and click Control Panel.
2. Click Performance and Maintenance and click System.
3. Click the Hardware tab and click Device Manager.
4. In the Device Manager list, check for conflicts with the other devices.
Conflicts are indicated by a yellow exclamation point (!) beside the conflicting
device or a red X if the device has been disabled.
5. Double-click any conflicting device listed to bring up the Properties window so
that you can determine what needs to be reconfigured or removed from the
Device Manager.
6. Resolve these conflicts before checking specific devices.
7. Double-click the malfunctioning device type in the Device Manager list.
8. Double-click the icon for the specific device in the expanded list.
The Properties window appears.
If an IRQ conflict exists, the Device status area in the Properties window
reports what other devices are sharing the device's IRQ.
9. Resolve any IRQ conflicts.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (4 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
You can also use the Windows XP Hardware Troubleshooter. To use the
troubleshooter, click the Start button and click Help and Support. Type hardware
troubleshooter in the Search field, and then click the arrow to start the search.
Click Hardware Troubleshooter in the Search Results list. In the Hardware
Troubleshooter list, click I need to resolve a hardware conflict on my
computer, and then click Next.
Using Microsoft® Windows® System
Restore
The Microsoft® Windows® XP operating system provides a System Restore feature
that allows you to return your computer to an earlier operating state if changes to the
computer's hardware or software (including new hardware or program installations) or
system settings, have left the computer in an undesirable operating state. You can
also undo the last system restore.
System Restore automatically creates system checkpoints. You can also manually
create your own checkpoints by creating restore points. To limit the amount of hard
disk space used, older restore points are automatically purged.
To resolve an operating system problem, you can use System Restore from Safe Mode
or Normal Mode to return your computer to an earlier operating state.
System Restore does not cause you to lose personal files stored in the My
Documents folder, data files, or e-mail messages after restoring the computer to an
earlier time. If you restore the computer to an operating state that existed before you
installed a program, the program's data files are not lost, but you must reinstall the
actual program again.
NOTICE: It is important to make regular backups of your data files. System
Restore does not monitor changes to or recover your data files. If the original
data on the hard disk is accidentally erased or overwritten, or if it becomes
inaccessible because of a hard disk malfunction, use your backup files to
recover the lost or damaged data.
System Restore is enabled on your new computer. However, if you reinstall Windows
XP with less than 200 MB of free hard-disk space available, System Restore is
automatically disabled. Before you use System Restore, confirm that it is enabled:
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (5 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
1. Click the Start button and click Control Panel.
2. Click the Performance and Maintenance.
3. Click System.
4. Click the System Restore tab.
5. Ensure that Turn off System Restore is not checked.
Creating a Restore Point
Using the System Restore Wizard
In Windows XP you can either use the System Restore Wizard or manually create a
restore point. To use the System Restore Wizard, click the Start button, click Help
and Support, click System Restore, and then follow the instructions in the System
Restore Wizard window. You can also create and name a restore point if you are
logged on as the computer administrator or a user with administrator rights.
Manually Creating a Restore Point
1. Click the Start button, point to All Programs—>
Accessories—> System Tools, and then click System Restore.
2. Click Create a restore point.
3. Click Next.
4. Type a name for the new restore point in the Restore point description field.
The present date and time are automatically added to the description of the new
restore point.
5. Click Create.
6. Click OK.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (6 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
Restoring the Computer to an Earlier Operating
State
If problems occur after installing a device driver, first try using Device Driver Rollback
(see "Using Windows XP Device Driver Rollback"). If Device Driver Rollback does not
resolve the problem, then use System Restore.
NOTICE: Before restoring the computer to an earlier operating state, save and
close all open files and exit all open programs. Do not alter, open, or delete any
files or programs until the system restoration is complete.
1. Click the Start button, point to All Programs—>
Accessories—> System Tools, and then click System Restore.
2. Ensure that Restore my computer to an earlier time is selected and click
Next.
3. Click a calendar date to which you want to restore your computer.
The Select a Restore Point screen provides a calendar that allows you to see
and select restore points. All calendar dates with available restore points appear
in bold.
4. Select a restore point and click Next.
If a calendar date has only one restore point, then that restore point is
automatically selected. If two or more restore points are available, click the
restore point that you want to use.
NOTICE: Save and close all open files and exit all open programs. Do not alter,
open, or delete any files or programs until the system restoration is complete.
5. Click Next.
The Restoration Complete screen appears after System Restore finishes
collecting data, and then the computer automatically restarts.
6. After the computer restarts, click OK.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (7 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Drivers and Utilities: Dell Inspiron 8200
To change the restore point, you can either repeat the steps using a different restore
point, or you can undo the restoration.
Undoing the Last System Restore
NOTICE: Save and close all open files and exit all open programs. Do not alter,
open, or delete any files or programs until the system restoration is complete.
1. Click the Start button, point to All Programs—>
Accessories—> System Tools, and then click System Restore.
2. Select Undo my last restoration and click Next.
NOTICE: Save and close all open files and exit all open programs. Do not alter,
open, or delete any files or programs until the system restoration is complete.
3. Click Next.
4. The System Restore screen appears, and then the computer automatically
restarts.
5. After the computer restarts, click OK.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/drivers.htm (8 of 8) [2/28/2004 7:40:17 AM]
Reinstalling Microsoft Windows XP: Dell Inspiron 8200
Back to Contents Page
Reinstalling Microsoft® Windows® XP
Dell™ Inspiron™ 8200
Before reinstalling the Windows XP operating system to correct a problem, try
correcting the problem by using Windows System Restore (see "Using Microsoft®
Windows® System Restore").
NOTICE: The Operating System CD provides options for reinstalling the
Windows XP operating system. The options can potentially overwrite files
installed by Dell and possibly affect programs installed on your hard drive.
Therefore, Dell does not recommend that you reinstall your operating system
unless instructed to do so by a Dell technical support representative.
HINT: The CD that you need to place in your CD or DVD drive is titled Operating
System.
1. Insert the Operating System CD.
2. Shut down the Dell™ computer, and then turn on the computer.
3. Press any key when the Press any key to boot from CD message appears on
the screen.
4. When the Windows XP Setup screen appears, press
set up Windows now.
to select To
5. Read the information in the License Agreement window, and then press
to agree with the license information.
6. If your computer already has Windows XP installed and you want to recover
your current Windows XP data, type r to select the repair option, and then go to
step 15.
If you want to install a new copy of Windows XP, press
file:///F|/Service%20Manuals/Dell/Inspiron/8200/windows.htm (1 of 3) [2/28/2004 7:40:18 AM]
to select the fresh
Reinstalling Microsoft Windows XP: Dell Inspiron 8200
copy option and then press
to select the highlighted partition
(recommended). Then follow the instructions on the screen.
7. The Windows XP Setup screen appears and Windows XP begins to copy files
and install the device drivers. The computer automatically restarts multiple
times before it requires additional input.
8. When the Welcome to Microsoft screen appears, click the green arrow icon at
the bottom of the screen to continue. Then follow the instructions on the screen
to finish the installation.
9. When the Regional Settings screen appears, select the settings for your locale,
and then click Next.
10. Enter your name and organization in the Personalize Your Software screen,
and then click Next.
11. If you are reinstalling Windows XP Home Edition, enter a name for your
computer when the Computer Name window appears, and then click Next.
If you are reinstalling Windows XP Professional, enter a name for your computer
and a password when the Computer Name and Administrator Password
window appears, and then click Next.
12. If you have a modem installed, the Modem Dialing Information screen
appears. Enter the requested information and click Next.
13. Enter the date, time, and time zone in the Date and Time Settings window
and click Next.
14. If your computer has a network adapter, select the appropriate network
settings. If your computer does not have a network adapter, you do not see this
option.
Windows XP begins to install its components and configure the computer. The
computer automatically restarts.
15. When the Welcome to Microsoft screen appears, click the green arrow icon at
the bottom of the screen to continue. Then follow the instructions on the screen
to complete the installation.
16. Remove the CD from the drive.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/windows.htm (2 of 3) [2/28/2004 7:40:18 AM]
Reinstalling Microsoft Windows XP: Dell Inspiron 8200
17. Reinstall the appropriate drivers (see "Reinstalling Drivers and Utilities").
18. Reinstall your virus protection software.
Enabling Hibernate Mode
1. Click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Power Management icon.
3. Click the Hibernate tab.
4. Ensure that Enable hibernate support is selected, and click Apply.
5. Click OK to close the Control Panel.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/windows.htm (3 of 3) [2/28/2004 7:40:18 AM]
System Setup Program: Dell Inspiron 8200
Back to Contents Page
System Setup Program
Dell™ Inspiron™ 8200
System Setup Overview
Viewing the System Setup Screens
System Setup Screens
Commonly Used Options
System Setup Overview
HINT: Your operating system may automatically configure most of the options
available in the system setup program, thus overriding options that you set
through the system setup program. (An exception is the External Hot Key
option, which you can disable or enable only through the system setup
program.) For more information on configuring features for your operating
system, see your Microsoft® Windows® Help and Support Center.
You can use the system setup program as follows:
●
●
To set or change user-selectable features—for example, your password
To verify information about your computer's current configuration, such as the
amount of system memory
After you set up your computer, run the system setup program to familiarize yourself
with your system configuration information and optional settings. Dell recommends
that you write down the information for future reference.
The system setup program contains the standard settings for your computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/setup.htm (1 of 4) [2/28/2004 7:40:18 AM]
System Setup Program: Dell Inspiron 8200
NOTICE: Unless you are an expert computer user or are directed to do so by
Dell technical support, do not change the settings for this program. Certain
changes might make your computer work incorrectly.
Viewing the System Setup Screens
1. Turn on (or restart) your computer.
2. When the Dell™ logo appears, press
immediately.
If you wait too long and the Windows® logo appears, continue to wait until you
see the Windows desktop. Then shut down your computer and try again.
Depending on your computer, you may also be able to enter the system setup
program by pressing
at any time while the computer is running.
System Setup Screens
HINT: To see information about a specific item on a system setup screen,
highlight the item and refer to the Help area on the screen.
The system setup screens display the current setup information and settings for your
computer. Each screen is laid out with the system setup options listed at the left. To
the right of each option is a field that displays the setting or value for that option. You
can change settings that appear as white type on the screen. Options or values that
you cannot change (because they are determined by the computer) appear less
bright.
A box in the upper-right corner of the screen displays help information for the
currently highlighted option; a box in the lower-right corner displays information
about the computer. System setup key functions are listed across the bottom of the
screen.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/setup.htm (2 of 4) [2/28/2004 7:40:18 AM]
System Setup Program: Dell Inspiron 8200
The screens display such information as:
●
System configuration
●
Boot (start-up) configuration and docking-device configuration settings
●
Basic device configuration settings
●
Battery charge status
●
Power management settings
●
System security and hard-drive password settings
Commonly Used Options
HINT: Certain options require that you reboot the computer for new settings to
take effect.
●
To enable or disable a device, highlight the item and press
.
Enabled items appear as white and display a small triangle to the left; disabled
items appear blue or dimmed without a triangle.
Changing Printer Modes
Set the Parallel Mode option according to the type of printer or device connected to
the parallel connector. To determine the correct mode to use, see the documentation
that came with the device.
Setting Parallel Mode to Disabled disables the parallel port and the port's LPT
address, freeing its interrupt for another device to use.
Changing COM Ports
Serial Port allows you to map the serial port COM address or disable the serial port
file:///F|/Service%20Manuals/Dell/Inspiron/8200/setup.htm (3 of 4) [2/28/2004 7:40:18 AM]
System Setup Program: Dell Inspiron 8200
and its address, freeing that interrupt for another device to use.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/setup.htm (4 of 4) [2/28/2004 7:40:18 AM]
Specifications: Dell Inspiron 8200
Back to Contents Page
Specifications
Dell™ Inspiron™ 8200
System Information
PC Card
Memory
Ports and Connectors
Communications
Video
Audio
Display
Keyboard
Touch Pad
Track Stick
Battery
AC Adapter
Physical
Environmental
System Information
System chip set
Intel® 845MP
Data bus width
64 bits
Microprocessor address bus
width
32 bits
Graphics bus
32-bit AGP 4X
PCI bus
33 MHz
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (1 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
PC Card
CardBus controller
Texas Instruments PCI
4450/4451 CardBus
controller
PC Card connector
two (supports two Type I or
Type II cards or one
Type III card)
Cards supported
3.3 V and 5 V
PC Card connector size
68 pins
Data width (maximum)
PCMCIA 16 bits
CardBus 32 bits
Memory
Architecture
PC2100 DDR
Memory module connector
two user-accessible
SODIMM sockets
Memory module capacities
128, 256, and 512 MB
Memory type
DDR SDRAM
Standard memory
128 MB
Maximum memory
1024 MB
Memory access time: clock
speed
266 MHz
Ports and Connectors
Serial
9-pin connector; 16550Ccompatible,
16-byte buffer connector
Parallel
25-hole connector;
unidirectional, bidirectional,
or ECP
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (2 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
Video
15-hole VGA connector
Audio
stereo (line-in) mini
connector; microphone mini
connector, stereo
headphone/speakers (lineout) mini connector
PS/2 keyboard/mouse
6-pin mini-DIN connector
USB
two 4-pin USB-compliant
connector
Infrared
sensor compatible with IrDA
Standard 1.1 (Fast IR) and
IrDA Standard 1.0 (Slow IR)
Docking
200-pin connector for a
Dell™ docking device
S-video TV-out
7-pin mini-DIN connector
for S-video, composite
video, and S/PDIF
(TV/digital audio adapter
cable supports composite
video and S/PDIF)
Modem
RJ-11 port
Network adapter
RJ-45 port
IEEE 1394
4-pin serial connector
Communications
Modem:
Type
integrated v.92 56K
Controller
softmodem
Interface
internal AC 97 bus
Network adapter
10/100 Ethernet LAN on
system board
Wireless
internal Mini PCI Wi-Fi
(802.11b) wireless support
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (3 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
Video
Video type
128-bit hardware
accelerated
Data bus
4X AGP
Video controller
NVIDIA GeForce4 440 Go™
ATI Mobility™ RADEON™
9000
Video memory
NVIDIA GeForce4 440 Go™
ATI Mobility™ RADEON™
9000
LCD interface
LVDS
TV support
NTSC or PAL in S-video and
composite modes
Audio
Audio type
AC97 (Soft Audio)
Audio controller
Cirrus Logic/Crystal CS4205
Stereo conversion
18-bit analog-to-digital
20-bit digital-to-analog
Interfaces:
Internal
AC 97
External
microphone-in connector,
stereo headphones/speakers
connector, and stereo line-in
connector
Speaker
two 4-ohm speakers
Internal speaker amplifier
1.9 W per channel into 4
ohms
Volume controls
keyboard shortcuts,
program menus
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (4 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
Display
Type (active-matrix TFT)
SXGA+, UXGA, or Enhanced
UXGA
Dimensions:
Height
228.1 mm (9 inches)
Width
304.1 mm (12 inches)
Diagonal
380.1 mm (15 inches)
Maximum resolutions
1400 x 1050 at 16.8 million
colors (SXGA+)
1600 x 1200 at 16.8 million
colors (UXGA and Enhanced
UXGA)
Response time (typical)
20-ms rise (maximum)
(SXGA+ and UXGA)
30-ms fall (maximum)
(SXGA+ and UXGA)
9-ms rise (maximum)
(Enhanced UXGA)
16-ms fall (maximum)
(Enhanced UXGA)
Refresh rate
60 Hz
Operating angle
0º (closed) to 180º
Pixel pitch
0.20 x 0.20 mm (SXGA+)
0.19 x 0.19 mm (UXGA and
Enhanced UXGA)
Controls
brightness can be controlled
through keyboard shortcuts
Keyboard
Number of keys
87 (U.S. and Canada); 88
(Europe); 90 (Japan)
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (5 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
Key travel
2.7 mm ± 0.3 (0.11 inch ±
0.016 inch)
Key spacing
19.05 mm ± 0.3 mm (0.75
inch ± 0.012 inch)
Layout
QWERTY/AZERTY/Kanji
Touch Pad
X/Y position resolution
(graphics table mode)
240 cpi
Size:
Width
64.88-mm (2.55-inch)
sensor-active area
Height
48.88-mm (1.92-inch)
rectangle
Track Stick
X/Y position resolution
(graphics table mode)
Size
250 count/sec @ 100 gf
protrudes 0.5 mm higher
than surrounding keycaps
Battery
Type
66-WHr "smart" lithium ion
(4460 mAh)
Dimensions:
Depth
88.5 mm (3.48 inches)
Height
21.5 mm (0.83 inch)
Width
139.0 mm (5.47 inches)
Weight
0.40 kg (0.88 lb)
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (6 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
Voltage
14.8 VDC
Charge time (approximate):
Computer on
2.5 hours
Computer off
1.5 hours
Operating life
approximately 2 to 4 hours,
depending on usage and
configuration
Life span (approximate)
400 discharge/charge cycles
Temperature range:
Operating
0º to 35ºC (32º to 95ºF)
Storage
–40º to 65ºC (–40º to
149ºF)
AC Adapter
Input voltage
90–135 VAC and 164–264
VAC
Input current (maximum)
1.5 A
Input frequency
47–63 Hz
Output current
5.5 A (maximum at 4second pulse);
4.5 A (continuous)
Output power
90 W
Rated output voltage
20 VDC
Dimensions:
Height
27.94 mm (1.1 inches)
Width
58.42 mm (2.3 inches)
Depth
133.85 mm (5.25 inches)
Weight (with cables)
0.4 kg (0.9 lb)
Temperature range:
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (7 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
Operating
0º to 40ºC (32º to 95ºF)
Storage
–40º to 65ºC (–40º to
149ºF)
Physical
Height
44.5 mm (1.75 inches)
Width
331.0 mm (13.03 inches)
Depth
276.0 mm (10.87 inches)
Weight (average, depending 3.46 kg (7.64 lb)
on configuration)
Environmental
Temperature range:
Operating
0º to 35ºC (32º to 95ºF)
Storage
–40º to 65ºC (–40º to
149ºF)
Relative humidity
(maximum):
Operating
10% to 90%
(noncondensing)
Storage
5% to 95%
(noncondensing)
Maximum vibration (using a random-vibration spectrum
that simulates a user environment):
Operating
0.9 GRMS
Storage
1.3 GRMS
Maximum shock (measured with the hard drive in headparked position and with a 2-ms half-sine pulse):
Operating
122 G
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (8 of 9) [2/28/2004 7:40:19 AM]
Specifications: Dell Inspiron 8200
Storage
163 G
Altitude (maximum):
Operating
–15.2 to 3048 m (–50 to
10,000 ft)
Storage
–15.2 to 10,668 m (–50 to
35,000 ft)
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/specs.htm (9 of 9) [2/28/2004 7:40:19 AM]
Power Management: Dell Inspiron 8200
Back to Contents Page
Power Management
Dell™ Inspiron™ 8200
Management Tips
Power Management Modes
Power Options Properties
Management Tips
●
●
●
Connect the Dell™ computer to an electrical outlet when possible because the
battery life expectancy is largely determined by the number of times the battery
is charged.
Place the computer in standby mode or hibernate mode when you leave the
computer unattended for long periods of time.
To exit a power management mode, press the power button.
Power Management Modes
Standby Mode
Standby mode conserves power by turning off the display and the hard drive after a
predetermined period of inactivity (a time-out). When the computer exits standby
mode, it returns to the same operating state it was in before entering standby mode.
NOTICE: If your computer loses AC and battery power while in standby mode,
it may lose data.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/power.htm (1 of 5) [2/28/2004 7:40:19 AM]
Power Management: Dell Inspiron 8200
To enter standby mode:
●
Click the Start button, click Turn off computer, and then click Stand by.
or
●
Depending on how you set the power management options on the Advanced
tab, use one of the following methods:
❍
Press the power button.
❍
Close the display.
❍
Press
.
To exit standby mode, press the power button or open the display depending on how
you set the options on the Advanced tab. You cannot make the computer exit
standby mode by pressing a key or touching the touch pad or track stick.
Hibernate Mode
Hibernate mode conserves power by copying system data to a reserved area on the
hard drive and then completely turning off the computer. When the computer exits
hibernate mode, it returns to the same operating state it was in before entering
hibernate mode.
NOTICE: You cannot remove devices or undock your computer while your
computer is in hibernate mode.
Your computer enters hibernate mode if the battery charge level becomes critically
low.
Depending on how you set the power management options on the Advanced tab, use
one of the following methods to enter hibernate mode:
●
Press the power button.
●
Close the display.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/power.htm (2 of 5) [2/28/2004 7:40:19 AM]
Power Management: Dell Inspiron 8200
●
Press
.
HINT: Some PC Cards may not operate correctly after the computer exits
hibernate mode. Remove and reinsert the card, or simply restart (reboot) your
computer.
To exit hibernate mode, press the power button. The computer may take a short time
to exit hibernate mode. You cannot make the computer exit hibernate mode by
pressing a key or touching the touch pad or track stick. For more information on
hibernate mode, see the documentation that came with your operating system.
Power Options Properties
To access the Microsoft® Windows® Power Options Properties window:
1. Click the Start button and click Control Panel.
2. Under Pick a category, click Performance and Maintenance.
3. Under or pick a Control Panel icon, click Power Options.
Power Schemes Tab
The Power schemes pull-down menu displays the selected preset power scheme.
Depending on your operating system, typical power schemes are:
HINT: Dell recommends that you use the Portable/Laptop power scheme to
maximize battery power.
●
Portable/Laptop
●
Home/Office
●
Always On
file:///F|/Service%20Manuals/Dell/Inspiron/8200/power.htm (3 of 5) [2/28/2004 7:40:19 AM]
Power Management: Dell Inspiron 8200
●
Presentation
●
Minimal Power Management
●
Max Battery
Windows XP controls the performance level of the processor depending on the power
scheme you select. You do not need to make any further adjustments to set the
performance level.
Each preset power scheme has different time-out settings for entering standby mode,
turning off the display, and turning off the hard drive. For more information on power
management options, see the Help and Support Center.
Alarms Tab
HINT: To enable audible alarms, click each Alarm Action button and select
Sound alarm.
The Low battery alarm and Critical battery alarm settings alert you with a
message when the battery charge falls below a certain percentage. When you receive
your computer, the Low battery alarm and Critical battery alarm check boxes are
selected. Dell recommends that you continue to use these settings.
Power Meter Tab
The Power Meter tab displays the current power source and amount of battery
charge remaining.
Advanced Tab
The Advanced tab allows you to:
●
Set power icon and standby mode password options.
●
Depending on your operating system, program the following functions:
❍
Prompt user for an action (Ask me what to do).
❍
Activate standby mode.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/power.htm (4 of 5) [2/28/2004 7:40:19 AM]
Power Management: Dell Inspiron 8200
❍
Activate hibernate mode.
❍
Shut down Windows and turn off the computer.
❍
Choose no action (None or Do nothing).
To program these functions, click an option from the corresponding pull-down menu,
and then click OK.
Hibernate Tab
The Hibernate tab lets you enable hibernate mode by clicking the Enable hibernate
support check box.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/power.htm (5 of 5) [2/28/2004 7:40:19 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
Back to Contents Page
Pin Assignments for I/O Connectors
Dell™ Inspiron™ 8200
USB Connector
Pin
Signal
1
VCC
2
-Data
3
+Data
4
Ground
Serial Connector
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (1 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
Pin
Signal
Pin
Signal
1
DCD
6
DSR
2
RXDA
7
RTS
3
TXDA
8
CTS
4
DTR
9
RI
5
GND
Parallel Connector
Pin
Signal
Pin
Signal
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (2 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
1
STRB#
11
BUSY
2
PD0
12
PE
3
PD1
13
SLCT
4
PD2
14
AFDF#
5
PD3
15
ERROR#
6
PD4
16
INIT#
7
PD5F
17
SLCT_IN
8
PD6F
18-23
GND
9
PD7F
24
DFDD/LPT#
10
ACK#
25
GND
Video Connector
Pin
Signal
Pin
Signal
1
RED
9
CRT_VCC
2
GREEN
10
GND
3
BLUE
11
MSEN#
4
NC
12
DAT_DDC2
5
GND
13
HSYNC
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (3 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
6
GND
14
VSYNC
7
GND
15
CLK_DDC2
8
GND
PS/2 Connector
Pin
Signal
1
DAT_KBD
2
DAT_SM1
3
GND
4
PS2VCC
5
CLK_KBD
6
CLK_SM1
S-Video TV-Out Connector
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (4 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
S-Video
Pin
Signal
1
GND
2
GND
3
DLUMA-L
4
DCRMA-L
Composite Video
Pin
Signal
5
SPDIF
6
DCMPS-L
7
SPGND
Docking Connector
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (5 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
Pin
Signal
Pin
Signal
1
STRB#/5V
101
VGA_GRN
2
PD0
102
GND
3
PD1
103
VGA_RED
4
PD2
104
GND
5
PD3
105
VGA_BLU
6
PD4
106
DOCK_SD/MODE
7
PD5
107
D_IRTX
8
PD6
108
D_IRRX
9
PD7
109
GND
10
GND
110
SPIRQB#
11
DOCK_SPKR
111
SPIRQC#
12
DOCK_MIC
112
DAT_DDC2
13
DOCK_LINE
113
CLK_DDC2
14
DOCK_CDROM
114
SPAR
15
GND
115
SPME#
16
M_SEN#
116
GND
17
POWER_SW#
117
SSERR#
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (6 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
18
QPCIEN#
118
SPERR#
19
S1.6M_EN#
119
SLOCK#
20
DFDD/LPT#
120
SSTOP#
21
GND
121
GND
22
NC
122
SDEVSEL#
23
NC
123
STRDY#
24
D_ATCTLED
124
SIRDY#
25
D_PWRLED
125
SFRAME#
26
DOCK_PWR_SRC
126
SCLKRUN#
27
DOCK_PWR_SRC
127
GND
28
DOCK_PWR_SRC
128
SGNTA#
29
GND
129
SREQA#
30
+5VDOCK
130
SGNT0#
31
+5VDOCK
131
SREQ0#
32
+5VDOCK
132
SPCIRST#
33
+5VDOCK
133
SH1SEL#
34
+5VDOCK
134
GND
35
GND
135
SWRPRT#
36
DOCK_PWR_SRC
136
SDSKCHG#/DRQ
37
DOCK_PWR_SRC
137
SDIR#
38
DOCK_PWR_SRC
138
STRK0#
39
DOCK_PWR_SRC
139
SSTEP#
40
GND
140
SDRV1#
41
DOCK_+DC_IN
141
GND
42
DOCK_+DC_IN
142
SMRT1#
43
DOCK_+DC_IN
143
SWRDATA#
44
DOCK_+DC_IN
144
SWGATE#
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (7 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
45
DOCK_+DC_IN
145
SRDATA#
46
DOCK_+DC_IN
146
SINDEX#
47
DOCK_+DC_IN
147
GND
48
DOCK_+DC_IN
148
NC
49
GND
149
+5VALW
50
LOW_PWR
150
NC
51
HSYNC
151
GND
52
VSYNC
152
CLK_SPCI
53
GND
153
GND
54
DOCKED
154
SAD0
55
USB_VD1+
155
SAD1
56
USB_VD1-
156
SAD2
57
GND
157
SAD3
58
USB_VD2+
158
SAD4
59
USB_VD2-
159
SAD5
60
DOCKOCI#
160
SAD6
61
RUN_ON#
161
GND
62
GND
162
SAD7
63
NC
163
SAD8
64
DOCK_SCLK
164
SC/BE0#
65
DOCK_LRCK
165
SAD9
66
DOCK_MCLK
166
SAD10
67
GND
167
SAD11
68
+12V
168
SAD12
69
AFD#
169
GND
70
ERROR#
170
SAD13
71
ACK#
171
SAD14
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (8 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
72
GND
172
SAD15
73
INIT#
173
SAD16
74
SLCT_IN#
174
SC/BE1#
75
BUSY
175
CD/BE2#
76
PE
176
GND
77
SLCT
177
SAD17
78
GND
178
SAD18
79
DAT_SMB
179
SAD19
80
DCLK_SMB
180
SAD20
81
SMB_INIT#
181
SAD21
82
GND
182
GND
83
DAT_DOCKSM1
183
SAD22
84
CLK_DOCKSM1
184
SAD23
85
DAT_DOCKKBD
185
SAD24
86
CLK_DOCKKBD
186
SC/BE3#
87
GND
187
SAD25
88
RI0
188
GND
89
CTS0
189
SAD26
90
RTS0
190
SAD27
91
DSR0
191
SAD28
92
GND
192
SAD29
93
DTR0
193
SAD30
94
TXD0#
194
SAD31
95
RXD0#
195
GND
96
DCD0
196
NC
97
NC
197
NC
98
+5VSUS
198
NC
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (9 of 10) [2/28/2004 7:40:21 AM]
Pin Assignments for I/O Connectors: Dell Inspiron 8200
99
NC
199
NC
100
NC
200
GND
IEEE 1394 Connector
Pin
Signal
1
TPB-
2
TPB+
3
TPA-
4
TPA+
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/pinouts.htm (10 of 10) [2/28/2004 7:40:21 AM]
Removing and Replacing Parts: Dell Inspiron 8200
Back to Contents Page
Removing and Replacing Parts
Dell™ Inspiron™ 8200
Before You Begin
System Components
Hard Drive and Fixed Optical Drive
System Upgrades
Keyboard
Display
Microprocessor Thermal-Cooling Assembly
Microprocessor Module
Video Graphics Board
Palm Rest
Reserve Battery
System Board
Battery and Module Bay Latches
Battery Charger Board
LED Board
Fan
RJ-11/RJ-45 Module
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/remove.htm [2/28/2004 7:40:21 AM]
Microprocessor Thermal-Cooling Assembly: Dell Inspiron 8200
Back to Contents Page
Microprocessor Thermal-Cooling
Assembly
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 microprocessor thermalcooling assembly
file:///F|/Service%20Manuals/Dell/Inspiron/8200/thermal.htm (1 of 3) [2/28/2004 7:40:31 AM]
Microprocessor Thermal-Cooling Assembly: Dell Inspiron 8200
2 microprocessor retaining
clip
Removing the Microprocessor Thermal-Cooling
Assembly
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the hinge cover.
4. Insert a non-marring plastic scribe into the latch mechanism at the left side of
the microprocessor retaining clip. Pry open the clip by pivoting the top of the
screwdriver toward the right side of the computer.
1 microprocessor thermalcooling assembly
file:///F|/Service%20Manuals/Dell/Inspiron/8200/thermal.htm (2 of 3) [2/28/2004 7:40:31 AM]
Microprocessor Thermal-Cooling Assembly: Dell Inspiron 8200
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the
heat transfer areas on the microprocessor thermal-cooling assembly. The oils in
your skin reduce the heat transfer capability of the thermal pads.
5. Lift out the thermal-cooling assembly.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/thermal.htm (3 of 3) [2/28/2004 7:40:31 AM]
Before You Begin: Dell Inspiron 8200
Back to Contents Page
Before You Begin
Dell™ Inspiron™ 8200
Preparing to Work Inside the Computer
Recommended Tools
Computer Orientation
Screw Identification
Preparing to Work Inside the Computer
CAUTION: Only a certified service technician should perform repairs on
your computer. Damage due to servicing that is not authorized by Dell
is not covered by your warranty. Read and follow applicable safety
instructions in the Owner's Manual that came with the computer.
CAUTION: Allow the computer to cool to room temperature before
working inside the computer.
NOTICE: To avoid damaging the computer, perform the following steps before
you begin working inside the computer.
1. Ensure that the work surface is flat and clean to prevent scratching the
computer cover.
2. Save any work in progress and exit all open programs.
3. Turn off the computer and all attached devices.
HINT: Before turning off the computer, ensure that the computer is not in a
power-management mode.
4. Ensure that the computer is undocked.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (1 of 6) [2/28/2004 7:40:48 AM]
Before You Begin: Dell Inspiron 8200
5. Disconnect the computer from the electrical outlet.
6. To avoid possible damage to the system board, wait 10 to 20 seconds and then
disconnect any attached devices.
7. Disconnect all other external cables from the computer.
8. Remove any installed PC Cards or plastic blanks from the PC Card slot.
9. Close the display and turn the computer upside down on a flat work surface.
10. Remove the battery from the battery bay.
NOTICE: To avoid component damage, always remove any installed batteries
before you service the computer.
11. Remove any device installed in the module bay.
12. To dissipate static electricity while you work, periodically touch an unpainted
metal surface on the computer chassis.
13. Handle components and cards by their edges, and avoid touching pins and
contacts.
Recommended Tools
The procedures in this document require the following tools:
●
#1 magnetized Phillips screwdriver
●
Small flat-blade screwdriver
●
Microprocessor extractor
●
Nonmarring plastic scribe
●
Flash BIOS update program floppy disk or CD (provided when needed to
upgrade the BIOS)
file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (2 of 6) [2/28/2004 7:40:48 AM]
Before You Begin: Dell Inspiron 8200
Computer Orientation
Screw Identification
When you are removing and replacing components, photocopy the placemat as a tool
to lay out and keep track of the component screws. The placemat provides the
number of screws and the sizes.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (3 of 6) [2/28/2004 7:40:48 AM]
Before You Begin: Dell Inspiron 8200
NOTICE: When reinstalling a screw, you must use a screw of the correct
diameter and length. Ensure that the screw is properly aligned with its
corresponding hole, and avoid overtightening.
Display to Bottom
Case:
Hard-Drive Door Security:
Keyboard to Bottom Case:
M3 x 5 mm (1 each)
M2.5 x 20 mm (4 each; one in
memory door and one in Mini
PCI door)
Display Bezel:
Display Panel to Display
Mounting Bracket:
Video Graphics
Board:
M2 x 3 mm (6 each)
M2.5 x 8 (3 each)
Rubber screw covers (4 each)
Plastic screw covers (2 each)
M2.5 x 4 mm (6 each)
Flex-Cable Mounting Bracket to
Top Cover:
file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (4 of 6) [2/28/2004 7:40:48 AM]
M2.5 x 6 mm (3
each; 2 at back of
computer; 1 at
display flex-cable
strain relief)
Before You Begin: Dell Inspiron 8200
M2.5 x 4 mm (1 each)
Palm Rest to
Bottom Case:
System Board:
LED Board:
M2.5 x 20 mm (9 each)
M2.5 x 4 mm captive washer
(3 each)
M2 x 4 mm (2 each)
Palm Rest Bracket:
M2.5 x 4 mm (4 each)
M2.5 x 20 mm (1 each)
Fan:
Memory Module/Modem Cover:
M2 x 4 mm (3 each)
M2.5 x 20 mm (1 each)
Mini PCI Card:
M2.5 x 20 mm (1 each)
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (5 of 6) [2/28/2004 7:40:48 AM]
Modem Daughter
Card:
M2 x 3 mm (1 each)
Before You Begin: Dell Inspiron 8200
file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (6 of 6) [2/28/2004 7:40:48 AM]
System Components: Dell Inspiron 8200
Back to Contents Page
System Components
Dell™ Inspiron™ 8200
NOTICE: Unless otherwise noted, each procedure in this document assumes
that a part can be replaced by performing the removal procedure in reverse
order.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/system.htm (1 of 2) [2/28/2004 7:40:49 AM]
System Components: Dell Inspiron 8200
1 display assembly
7
main battery
2 hinge cover
8
device in module
bay
3 microprocessor thermalcooling assembly
9
fixed optical drive
4 system board
10 palm rest
5 hard drive
11 keyboard
6 bottom case
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/system.htm (2 of 2) [2/28/2004 7:40:49 AM]
Hard Drive and Fixed Optical Drive: Dell Inspiron 8200
Back to Contents Page
Hard Drive and Fixed Optical Drive
Dell™ Inspiron™ 8200
Hard Drive
Fixed Optical Drive
NOTICE: Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered
by your warranty.
Hard Drive
NOTICE: Disconnect the computer and attached devices from the electrical
outlet and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
NOTICE: The hard drive is very sensitive to shock. Handle the drive by its
edges (do not squeeze the top of the case), and avoid dropping it.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/hdd.htm (1 of 4) [2/28/2004 7:40:49 AM]
Hard Drive and Fixed Optical Drive: Dell Inspiron 8200
1
bottom of computer
2
M3 x 5-mm screw
3
hard drive door
Removing the Hard Drive
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the M3 x 5-mm screw.
3. Pull the hard drive out.
Replacing the Hard Drive
1. Push the hard drive into the drive bay until the drive door is flush with the
computer case.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/hdd.htm (2 of 4) [2/28/2004 7:40:49 AM]
Hard Drive and Fixed Optical Drive: Dell Inspiron 8200
2. Push down on the drive until it snaps into place.
3. Replace the M3 x 5-mm screw in the hard drive door.
Fixed Optical Drive
NOTICE: Disconnect the computer and attached devices from the electrical
outlet and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1
captive screw
2
pull tab
file:///F|/Service%20Manuals/Dell/Inspiron/8200/hdd.htm (3 of 4) [2/28/2004 7:40:49 AM]
Hard Drive and Fixed Optical Drive: Dell Inspiron 8200
Removing the Fixed Optical Drive
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Loosen the captive screw on the bottom of the computer.
3. Turn the computer over (to keep the captive screw from interfering with the pull
tab) and pull out the pull tab.
4. Use the pull tab to remove the fixed optical drive.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/hdd.htm (4 of 4) [2/28/2004 7:40:49 AM]
System Upgrades: Dell Inspiron 8200
Back to Contents Page
System Upgrades
Dell™ Inspiron™ 8200
Memory Modules
Modem Daughter Card
Mini PCI Card
Memory Modules
NOTICE: Disconnect the computer and any attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
Removing the Memory Module/Modem Cover
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (1 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
1 M2.5 x 20-mm screw
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the M2.5 x 20-mm screw from the memory module/modem cover.
3. Disengage the metal tabs at the opposite end of the cover.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (2 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
1 DIMM B
2 memory module sockets
(2)
3 DIMM A socket
4 modem daughter card
5 metal tabs (2 per
socket)
Removing the Memory Modules
1. Remove the memory module/modem cover.
2. To release a memory module from its socket, spread apart the tabs at each side
of the module until the module pops up slightly.
3. Lift the memory module out of its socket.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (3 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
Replacing the Memory Modules
1. If you only have one memory module, install it in the socket labeled "DIMM A."
Install a second memory module in the socket labeled "DIMM B."
HINT: Memory modules are keyed to fit into their sockets in only one direction.
2. Insert the memory-module edge connector into the socket slot at a 45-degree
angle and press the module firmly into the slot.
3. Pivot the module down until it clicks into place. If you do not hear a click,
remove the module and reinstall it.
4. Insert the metal tabs on the memory module/modem cover into the bottom
case, rotate the cover down, and replace the M2.5 x 20-mm screw.
Modem Daughter Card
Removing the Modem Daughter Card
NOTICE: Disconnect the computer and any attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Turn the computer over and remove the memory module/modem cover.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (4 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
1 modem daughter card
2 M2 x 3-mm screw
3. Remove the M2 x 3-mm screw that secures the modem daughter card to the
system board.
4. Use the pull tab to pull the modem daughter card straight up out of its
connector.
NOTICE: Do not pull on the modem cable. Pull the connector on the end of the
cable to disconnect the cable.
5. Disconnect the modem cable from the modem daughter card.
Replacing the Modem Daughter Card
NOTICE: The cable connectors are keyed for correct insertion. Do not force the
connections.
1. Connect the modem cable to the modem daughter card.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (5 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
2. Use the screw and boss holes at opposite corners of the modem daughter card
to align the card, and press the card into its connector on the system board.
3. Install the M2 x 3-mm screw that secures the card to the system board.
4. Replace the memory module/modem cover.
Mini PCI Card
You must remove the optional Mini PCI wireless modem (if installed) before the
system board can be removed. A wireless modem card must be connected to the
internal antenna of the computer.
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
Mini PCI Card Cover
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (6 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
1 M2.5 x 20-mm screw
Removing the Mini PCI Card
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the M2.5 x 20-mm screw and then remove the Mini PCI card cover.
3. To release the Mini PCI card, spread the metal securing tabs until the card pops
up slightly.
4. Disconnect the card from the internal antenna.
5. Lift out the card and disconnect any attached cables.
Replacing the Mini PCI Card
1. Align the Mini PCI card with the socket at a 45-degree angle, and press the Mini
PCI card into the socket.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (7 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
2. Connect the internal-antenna cable to the primary-antenna connector on the
card.
NOTICE: The connectors are keyed for correct insertion; do not force the
connections.
1 internal-antenna cable
2 primary-antenna
connector on card
3. Pivot the Mini PCI card down until it clicks into place.
4. Replace the Mini PCI card cover and the M2.5 x 20-mm screw.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (8 of 9) [2/28/2004 7:40:50 AM]
System Upgrades: Dell Inspiron 8200
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/upgrades.htm (9 of 9) [2/28/2004 7:40:50 AM]
Keyboard: Dell Inspiron 8200
Back to Contents Page
Keyboard
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/keyboard.htm (1 of 5) [2/28/2004 7:40:51 AM]
Keyboard: Dell Inspiron 8200
1 M2.5 x 20-mm screws
(4)
Removing the Keyboard
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Turn the computer over and remove the four M2.5 x 20-mm screws (three
labeled "circle K" and one labeled "circle K/M").
3. Turn the computer over and open the display.
NOTICE: Be careful when handling the keyboard. The keycaps are fragile,
easily dislodged, and time-consuming to replace.
4. Use a nonmarring plastic scribe under the blank key to pry up the keyboard.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/keyboard.htm (2 of 5) [2/28/2004 7:40:51 AM]
Keyboard: Dell Inspiron 8200
1 blank key
2 keyboard
3 right side of computer
5. Lift the right end of the keyboard and slide it slightly toward the right side of the
computer to disengage the tabs at the left end.
6. Pivot the keyboard and balance it upright on the left side of the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/keyboard.htm (3 of 5) [2/28/2004 7:40:51 AM]
Keyboard: Dell Inspiron 8200
1 keyboard cable
2 keyboard interface
connector
3 system board
7. Disconnect the keyboard cable and lay the keyboard aside.
Replacing the Keyboard
1. While bracing the keyboard upright on its left end, connect the keyboard cable
to the keyboard interface connector on the system board.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/keyboard.htm (4 of 5) [2/28/2004 7:40:51 AM]
Keyboard: Dell Inspiron 8200
NOTICE: Position the keyboard/track-stick flex cable so that it is not pinched
when you replace the keyboard in the bottom case.
2. Insert the metal tabs at the left end of the keyboard under the edge of the
bottom case, and fit the keyboard into place.
3. Check that the keyboard is correctly installed. The keys should be flush with the
left and right surfaces of the palm rest.
4. Turn the computer over and reinstall the four M2.5 x 20-mm screws. For extra
stability, you can open the computer slightly and brace the keyboard under each
screw as you install the screw.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/keyboard.htm (5 of 5) [2/28/2004 7:40:51 AM]
Display: Dell Inspiron 8200
Back to Contents Page
Display
Dell™ Inspiron™ 8200
Display Overview
Hinge Cover
Display Assembly
Display Bezel
Display Panel
Display Latch
Display Overview
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (1 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
1 display
2 hinge cover
3 M2.5 x 6-mm screws (3)
4 bottom case
5 display flex cable
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (2 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
Hinge Cover
1 hinge cover
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Use a nonmarring plastic scribe to loosen the hinge cover at the back and at
each side of the computer.
3. Open the computer and use the scribe to pry between the
hinge cover until the hinge cover pops off.
4. Open the display and lift off the hinge cover.
Display Assembly
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (3 of 10) [2/28/2004 7:40:53 AM]
key and the
Display: Dell Inspiron 8200
1 M2.5 x 6-mm screws (2)
1. Remove the hinge cover.
NOTICE: Remove the display flex cable before you remove the display
assembly.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (4 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
1
M2.5 x 6-mm screw
2
strain relief
3
display flex cable
4
pull loop
2. Remove the M2.5 x 6-mm flex-cable strain relief screw, and then use the pull
loop to remove the display flex cable from the graphics card.
NOTICE: When reconnecting the flex cable, press down on both ends of the
connector, not in the middle. Pressing the middle of the connector can damage
fragile components.
3. Open the display and, from the back of the computer, remove the two M2.5 x 6mm screws labeled "circle D" that secure the display assembly to the bottom
case.
4. With the display in an upright position, lift the display assembly from the bottom
case.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (5 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (6 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
1 M2.5 x 4-mm screws (6)
8
M2 x 3-mm screws
(6)
2 rubber screw covers (4)
9
top cover
3 display bezel
10 hinge cover
4 plastic tabs (6)
11 display flex cable
5 M2.5 x 4-mm screw
12 display panel
6 flex-cable mounting
bracket
13 plastic screw covers
(2)
7 display latch
Display Bezel
1. Use a scribe to pry out the four rubber screw covers located across the top of
the bezel.
2. Remove the four M2.5 x 4-mm screws located across the top of the bezel.
3. Use a scribe at the indentations to pry out the two plastic screw covers located
at the bottom of the bezel.
4. Remove the two M2.5 x 4-mm screws located at the bottom of the bezel.
5. Separate the bezel from the top cover.
The bezel is secured to the top cover with plastic tabs around the sides. Use a
plastic scribe to help separate the bezel from the top cover.
Display Panel
Removing the Display Panel
1. Remove the hinge cover.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (7 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
2. Detach the display flex cable from the strain relief and the graphics card.
3. Remove the display bezel.
4. Remove the M2.5 x 4-mm screw that secures the plastic flex-cable mounting
bracket to the top cover.
5. Remove the six M2 x 3-mm screws (three on each side) from the right and left
sides of the panel.
6. Lift the display panel and flex cable out of the top cover.
7. Disconnect the flex cable from the two connectors (one ZIF and one standard
connector) on the display panel.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (8 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
1
ZIF connector
2
standard connector
Replacing the Display Panel
HINT: Use a magnetic screwdriver to reassemble the display panel in the
display.
1. Connect the flex cable to the two connectors on the back of the display panel.
2. Place the display panel in the top cover, taking care that the flex cable is in
place and is not crushed or crimped.
3. Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bracket
to the top cover.
4. Starting on the left side, use a magnetic screwdriver to reinstall the six M2 x 3mm screws that secure the display panel in the top cover.
5. Reinstall the M2.5 x 6-mm flex-cable strain relief screw that secures the display
flex-cable strain relief, and reconnect the flex cable to the graphics card.
6. Reinstall the display bezel.
Display Latch
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (9 of 10) [2/28/2004 7:40:53 AM]
Display: Dell Inspiron 8200
1. Remove the hinge cover.
2. Detach the display flex cable from the strain relief and the graphics card.
3. Remove the display bezel.
4. Remove the display panel from the top cover.
5. Remove the display latch by disengaging the latch and captive spring.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (10 of 10) [2/28/2004 7:40:53 AM]
Microprocessor Module: Dell Inspiron 8200
Back to Contents Page
Microprocessor Module
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
Removing the Microprocessor Module
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the hinge cover.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/cpu.htm (1 of 5) [2/28/2004 7:40:54 AM]
Microprocessor Module: Dell Inspiron 8200
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the
heat transfer areas on the microprocessor thermal-cooling assembly. The oils in
your skin reduce the heat transfer capability of the thermal pads.
4. Remove the microprocessor thermal-cooling assembly.
NOTICE: When removing the microprocessor module, pull the module straight
up. Do not bend the pins.
5. Remove the microprocessor module.
NOTICE: To avoid damage to the microprocessor, hold the screwdriver so that
it is perpendicular to the microprocessor when loosening the cam screw (see
"Microprocessor Cam Screw").
Microprocessor Cam Screw (Example)
NOTICE: Hold the microprocessor down while turning the cam screw to prevent
intermittent contact between the cam screw and microprocessor.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/cpu.htm (2 of 5) [2/28/2004 7:40:54 AM]
Microprocessor Module: Dell Inspiron 8200
1 cam screw
2 perpendicular
screwdriver
3 processor die (do not
touch)
a. Loosen the cam screw that secures the microprocessor module. The
location of the screw and the rotation direction may vary with the socket
manufacturer; look for small icons indicating open and locked positions.
b. Use the microprocessor extraction tool to remove the microprocessor
module.
Replacing the Microprocessor Module
NOTICE: If you received a flash BIOS update program floppy disk or CD with
the replacement microprocessor, you must update the BIOS after replacing the
microprocessor module.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/cpu.htm (3 of 5) [2/28/2004 7:40:54 AM]
Microprocessor Module: Dell Inspiron 8200
NOTICE: Proper seating of the microprocessor module does not require force.
NOTICE: A microprocessor module that is not properly seated can result in an
intermittent connection and subsequent failures.
1. Align the pin-1 triangle on the microprocessor with the pin-1 triangle in the
socket, insert the microprocessor into the socket, and move the microprocessor
around slightly until you feel it settle into the socket.
When the microprocessor module is correctly seated, all four corners are aligned
to the same height. If one or more corners of the module are higher than the
others, the module is not seated correctly.
NOTICE: Hold the microprocessor down while turning the cam screw to prevent
intermittent contact between the cam screw and microprocessor (see
"Microprocessor Cam Screw").
2. Tighten the cam screw.
NOTICE: Do not over- or undertighten the screw. Tighten the screw until the
screw indicator points to the "closed" or "locked" indicator on the socket.
3. Replace the microprocessor thermal-cooling assembly.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/cpu.htm (4 of 5) [2/28/2004 7:40:54 AM]
Microprocessor Module: Dell Inspiron 8200
4. Close the microprocessor retaining clip.
5. To latch the clip, insert a flat-blade scribe into the latch mechanism and pivot
the top of the scribe away from the clip.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/cpu.htm (5 of 5) [2/28/2004 7:40:54 AM]
Video Graphics Board: Dell Inspiron 8200
Back to Contents Page
Video Graphics Board
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 M2.5 x 8-mm screws (3)
Removing the Video Graphics Board
file:///F|/Service%20Manuals/Dell/Inspiron/8200/vidbd.htm (1 of 2) [2/28/2004 7:40:54 AM]
Video Graphics Board: Dell Inspiron 8200
NOTE: The video graphics board may have a flexible shield attached to it with
an adhesive. The shield prevents electromagnetic interference with other
electronic devices, such as cellular phones. Do not exchange or reuse the shield.
Newer versions of the board may not require the shield; if a shield is required, it
is already attached to the replacement board.
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the hinge cover.
4. Detach the display flex cable from the strain relief and the graphics card.
5. Remove the three M2.5 x 8-mm screws that secure the video graphics board.
6. Separate the video graphics board from the system board connector.
Replacing the Video Graphics Board
1. Align the three screw holes and press down firmly on the word "Dell" to seat the
board in its connector.
NOTICE: Ensure that the board is correctly and firmly seated before continuing.
Failure to do so will cause intermittent video failures.
2. Replace the three M2.5 x 8-mm screws.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/vidbd.htm (2 of 2) [2/28/2004 7:40:54 AM]
Palm Rest: Dell Inspiron 8200
Back to Contents Page
Palm Rest
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1
pull loop
file:///F|/Service%20Manuals/Dell/Inspiron/8200/palmrest.htm (1 of 4) [2/28/2004 7:40:55 AM]
Palm Rest: Dell Inspiron 8200
NOTICE: The reserve battery provides power to the computer's time RTC and
NVRAM when the computer is turned off. Removing the palm rest disconnects
the reserve battery and causes the computer to lose the date and time
information as well as all user-specified parameters in NVRAM. If possible, copy
the information before you disconnect the reserve battery.
Removing the Palm Rest
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the hard drive and the fixed optical drive.
3. Remove the keyboard.
4. Remove the hinge cover.
5. Remove the display assembly.
NOTICE: To avoid damaging the palm rest, you must first remove the display
assembly.
6. Turn the computer over.
7. Remove the nine M2.5 x 20-mm screws (labeled "circle P") that secure the palm
rest to the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/palmrest.htm (2 of 4) [2/28/2004 7:40:55 AM]
Palm Rest: Dell Inspiron 8200
1 M2.5 x 20-mm screws
(9)
8. Turn the computer over.
9. Use the pull loop to disconnect the palm-rest flex cable from the touch-pad
connector on the system board.
10. On the left and right sides of the palm rest, use a flat-blade scribe between the
palm rest and the bottom case of the computer to separate the snaps that
secure the palm rest to the bottom case.
11. Lift out the palm rest.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/palmrest.htm (3 of 4) [2/28/2004 7:40:55 AM]
Palm Rest: Dell Inspiron 8200
Replacing the Palm Rest
When replacing the palm rest screws, install the two screws at the back corners of the
computer first to help align the palm rest correctly.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/palmrest.htm (4 of 4) [2/28/2004 7:40:55 AM]
Reserve Battery: Dell Inspiron 8200
Back to Contents Page
Reserve Battery
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 palm rest bracket
2 reserve battery
3 reserve battery cable
file:///F|/Service%20Manuals/Dell/Inspiron/8200/resbatt.htm (1 of 3) [2/28/2004 7:40:56 AM]
Reserve Battery: Dell Inspiron 8200
NOTICE: The reserve battery provides power to the computer's RTC and
NVRAM when the computer is turned off. Removing the battery causes the
computer to lose the date and time information as well as all user-specified
parameters in NVRAM. If possible, copy the information before you remove the
reserve battery.
Removing the Reserve Battery
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the hinge cover.
4. Remove the display assembly.
5. Remove the palm rest.
6. On the underside of the palm rest, disconnect the palm-rest flex cable from the
ZIF connector.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/resbatt.htm (2 of 3) [2/28/2004 7:40:56 AM]
Reserve Battery: Dell Inspiron 8200
1 M2.5 x 4-mm screws (4)
2 palm rest bracket
3 palm-rest flex cable
7. Remove the four M2.5 x 4-mm screws that secure the palm rest bracket.
8. While supporting the palm-rest flex cable, lift out the palm rest bracket and turn
it over.
9. Disconnect the reserve battery cable.
10. Remove the reserve battery:
a. Pry the reserve battery free from the metal palm rest bracket.
b. Remove the foam-pad remnants from the palm rest bracket.
Replacing the Reserve Battery
1. Seat the reserve battery and press it into place.
2. Connect the reserve battery cable.
3. Place the palm rest bracket loosely in the palm rest, and connect the palm-rest
flex cable to the ZIF connector.
4. Replace the four M2.5 x 4-mm screws that secure the palm rest bracket to the
palm rest.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/resbatt.htm (3 of 3) [2/28/2004 7:40:56 AM]
System Board: Dell Inspiron 8200
Back to Contents Page
System Board
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 M2.5 x 4-mm captivewasher screws (3)
file:///F|/Service%20Manuals/Dell/Inspiron/8200/sysboard.htm (1 of 5) [2/28/2004 7:40:57 AM]
System Board: Dell Inspiron 8200
2 system board
3 network connector
4 modem connector
5 network cable cover
6 M2.5 x 20-mm screw
The BIOS chip on the system board contains the service tag sequence, which is also
visible on a bar code label on the bottom of the computer.
The replacement kit for the system board includes a floppy disk or CD that provides a
utility for transferring the service tag sequence to the replacement system board.
NOTICE: If you received a flash BIOS update program floppy disk or CD with
the replacement microprocessor, you must update the BIOS after replacing the
microprocessor module.
Removing the System Board
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the hard drive and the fixed optical drive.
3. Remove any installed Mini PCI Cards.
4. If migrating the memory, remove all installed memory modules.
5. Remove (if migrating) or disconnect the modem daughter card.
6. Remove the keyboard.
7. Remove the hinge cover.
8. Remove the display assembly.
9. Remove the palm rest.
10. Remove the video graphics board.
11. Remove the microprocessor thermal-cooling assembly.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/sysboard.htm (2 of 5) [2/28/2004 7:40:57 AM]
System Board: Dell Inspiron 8200
12. If migrating the microprocessor, remove the microprocessor module.
13. Separate the network cable from the system board:
a. First remove the network cable cover: Insert a narrow plastic scribe or
small screwdriver just barely into the slot that faces the back of the
computer (do not insert the scribe far enough to catch on the wires
inside), press down on the cover lightly to secure it, and pry upward to
release the cover.
1
network cable cover
b. Disconnect the network cable. Do not pull on the cable wires. Instead, pry
up the outer corner of the upper connector until the connectors start to
separate.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/sysboard.htm (3 of 5) [2/28/2004 7:40:57 AM]
System Board: Dell Inspiron 8200
1 outer corner of upper
connector
2 network cable
14. Remove the three M2.5 x 4-mm captive-washer screws from the system board.
15. Remove the M2.5 x 20-mm screw from the center of the LED board.
16. Lift the front of the system board and work it out of the back panel.
If necessary to help release the system board, pull outward on the top of the
plastic near the back left corner of the bottom case (see the small arrow at the far
left in the following figure).
file:///F|/Service%20Manuals/Dell/Inspiron/8200/sysboard.htm (4 of 5) [2/28/2004 7:40:57 AM]
System Board: Dell Inspiron 8200
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/sysboard.htm (5 of 5) [2/28/2004 7:40:57 AM]
Battery and Module Bay Latches: Dell Inspiron 8200
Back to Contents Page
Battery and Module Bay Latches
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/baylatch.htm (1 of 3) [2/28/2004 7:40:58 AM]
Battery and Module Bay Latches: Dell Inspiron 8200
1 wear ribs (2 on
underside)
2 bumps
3 slider
4 spring
5 bottom case
6 latch housing (2)
7 latch buttons (2)
8 location of snap tabs (2)
Removing and Replacing the Battery and Module
Bay Latches
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the hinge cover.
4. Remove the display assembly.
5. Remove the palm rest.
6. Remove a latch button from the bottom case by squeezing the snap tabs in the
center of the latch.
Tape over or hold down the upper latch assembly (spring and slider) to hold the
assembly in place. Apply downward pressure to the snap tabs while squeezing
them together (tweezers work well) to eject the latch button from the underside
of the bottom case without loosening the upper latch assembly. If the upper latch
assembly does come loose:
a. Slide the spring onto the slider, and reinstall both pieces in the latch
housing on the inside of the bottom case.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/baylatch.htm (2 of 3) [2/28/2004 7:40:58 AM]
Battery and Module Bay Latches: Dell Inspiron 8200
b. Ensure that the slider is inserted so that the side with the two bumps is
facing the back of the bottom case, and the surface with the wear ribs lies
against the upper surface of the bottom case.
7. Hold the upper latch assembly in place while you snap the new latch button in
from underneath the bottom case, making certain the snap tabs are fully
engaged in the slider.
Ensure that the newly installed latch assembly moves smoothly and freely when
pushed and released.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/baylatch.htm (3 of 3) [2/28/2004 7:40:58 AM]
Battery Charger Board: Dell Inspiron 8200
Back to Contents Page
Battery Charger Board
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
Removing the Battery Charger Board
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the hinge cover.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/battch.htm (1 of 2) [2/28/2004 7:40:58 AM]
Battery Charger Board: Dell Inspiron 8200
4. Remove the display assembly.
5. Remove the palm rest.
6. Remove the video graphics board.
7. Lift the battery charger board out of the system board connector.
Replacing the Battery Charger Board
Align the screw holes on the battery charger board with the screw holes on the bottom
case, and then press the battery charger board down into its connector.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/battch.htm (2 of 2) [2/28/2004 7:40:58 AM]
LED Board: Dell Inspiron 8200
Back to Contents Page
LED Board
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 M2 x 4-mm screws (2)
file:///F|/Service%20Manuals/Dell/Inspiron/8200/led.htm (1 of 2) [2/28/2004 7:40:59 AM]
LED Board: Dell Inspiron 8200
Removing the LED Board
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the hinge cover.
3. Remove the two M2 x 4-mm screws.
4. Lift the LED board away from its connector.
Replacing the LED Board
1. Align the two screw holes with the two mounting holes on the bottom case, and
press the board into its connector.
2. Replace the two M2 x 4-mm screws.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/led.htm (2 of 2) [2/28/2004 7:40:59 AM]
Fan: Dell Inspiron 8200
Back to Contents Page
Fan
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
1 fan cables
2 M2 x 4-mm screws (3)
Removing the Fan
1. Follow the instructions in "Preparing to Work Inside the Computer."
file:///F|/Service%20Manuals/Dell/Inspiron/8200/fan.htm (1 of 2) [2/28/2004 7:41:00 AM]
Fan: Dell Inspiron 8200
2. Remove the system board.
3. Remove the three M2 x 4-mm screws from the fan.
4. Disconnect the two fan cables from the system board.
5. Pull the fan away from the back-panel bracket.
NOTICE: When reconnecting the fan cables, connect the shorter cable to the
connector closest to the fan. Route both cables so that they will not be pinched
by the microprocessor thermal-cooling assembly.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/fan.htm (2 of 2) [2/28/2004 7:41:00 AM]
RJ-11/RJ-45 Module: Dell Inspiron 8200
Back to Contents Page
RJ-11/RJ-45 Module
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching unpainted metal on the computer.
NOTICE:
1 network cable
2 bottom case
3 RJ-11/RJ-45 module
4 modem cable
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (1 of 3) [2/28/2004 7:41:00 AM]
RJ-11/RJ-45 Module: Dell Inspiron 8200
Removing the RJ-11/RJ-45 Module
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the system board.
3. From outside the bottom case, push in and up on the RJ-11/RJ-45 module while
pulling the side of the bottom case slightly outward. When the module
disengages, lift it out.
Replacing the RJ-11/RJ-45 Module
When replacing the RJ-11/RJ-45 module, hold both cables safely out of the way and
snap the housing down into place. Then route the modem cable through the vertical
slot, through the appropriate posts, and out through the corner of the memory
module/modem cutout.
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (2 of 3) [2/28/2004 7:41:00 AM]
RJ-11/RJ-45 Module: Dell Inspiron 8200
1
vertical slot
2
modem cable
When replacing the system board, ensure that the network cable is safely above the
board and out of the way.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/rj11_45b.htm (3 of 3) [2/28/2004 7:41:00 AM]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising