HP | Presario EZ2700 | Specifications | HP Presario EZ2700 Specifications

HP Presario EZ2700 Specifications
Compaq.com - Compaq Presario Maintenance and Service Guide
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario Series Computers
Product
Description
Troubleshooting
Illustrated
Parts Catalog
Removal &
Replacement
Procedures
Jumper &
Switch
Information
Specifications
See the Notice for copyright and trademark information, and the Preface for symbol
conventions and Technician Notes.
Click to download ZIP file of complete MSG to hard drive.
This MSG will be periodically maintained and updated as needed.
To report a technical problem, contact your Regional Support Center or IM Help Center.
For content comments or questions, contact the Editor.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/index.htm [12/10/2002 9:17:59 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
NOTICE
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS
CONTAINED HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING,
PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in
any form without prior written consent from Compaq Computer Corporation. © 1999 Compaq Computer Corporation.
All rights reserved. Compaq, Presario Registered U. S. Patent and Trademark Office.
Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. Windows 98 is a trademark of
Microsoft Corporation. The software described in this guide is furnished under a license agreement or nondisclosure
agreement. The software may be used or copied only in accordance with the terms of the agreement. Product names
mentioned herein may be trademarks and/or registered trademarks of their respective companies.
Online Maintenance and Service Guide
Compaq Presario 5400 Series Personal Computers
June 1999
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/notice.html [12/10/2002 9:18:04 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5200 Series
United States
December 10, 2002
PREFACE
This Maintenance and Service Guide is a troubleshooting guide that can be used for reference when servicing the
Compaq Presario Series Personal Computers.
Compaq Computer Corporation reserves the right to make changes to the Compaq Presario 5400 Series Personal
Computers without notice.
Symbols
The following words and symbols mark special messages throughout this guide.
WARNING: Text set off in this manner indicates that failure to
WARNING.GIF
follow directions in the warning could result in bodily harm or loss
(918
of life.
bytes)
CAUTION: Text set off in this manner indicates that failure to
CAUTION.GIF
follow directions could result in damage to equipment or loss of
data.
(182
bytes)
IMPORTANT:
NOTE:
Text set off in this manner presents clarifying information or specific
instructions.
Text set off in this manner presents commentary, sidelights, or interesting points of
information.
Technician Notes
WARNING: Only authorized technicians trained by Compaq should repair
WARNING.GIF
(918 this equipment. All troubleshooting and repair procedures are detailed to
allow only subassembly/module level repair. Because of the complexity of the
bytes) individual boards and subassemblies, the user should not attempt to make
repairs at the component level or to make modifications to any printed circuit
board. Improper repairs can create a safety hazard. Any indications of
component replacement or printed circuit board modifications may void any
warranty.
Locating Additional Information
The following documentation is available to support this product:
■
■
■
■
■
■
■
Compaq Presario documentation set
Introducing Windows 98 Guide
Service Training Guides
Compaq Service Advisories and Bulletins
Compaq QuickFind
Compaq Service Quick Reference Guide
Compaq Help Center
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/preface.html [12/10/2002 9:18:08 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
TROUBLESHOOTING - INDEX PAGE
Clearing CMOS
Power-On Self Test (POST)
Configuration
Preparing the computer
Setup
Accessing Compaq utilities options
Troubleshooting without Diagnostics
Checklist for minor problems
Hardware installation
Power
USB
Diskette drive
Hard drive
CD or DVD and CD-RW drive
Resolving hardware conflicts
Diagnostic Error Codes
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/trbsht.html [12/10/2002 9:18:23 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Clearing CMOS
Power-On Self
Test (POST)
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
TROUBLESHOOTING
Clearing CMOS
Configuration
If the power-on password is unknown, clearing CMOS will disable the password and allow the computer to be
operated.
Diagnostic error
codes
The location of the Real-time Clock (RTC) battery is shown on the system board illustration below.
Troubleshooting
without
diagnostics
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cmos.html [12/10/2002 9:18:25 AM]
1
Complete the preparation for
disassembly.
2
Remove the Left Side Easy access
panel .
3
Remove the drive cage.
4
To disable the password, move the
jumper (JP1) from pins 1-2 (normal)
to pins 2-3 (clear CMOS) for 10
seconds, then return to pins 1-2.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Clearing CMOS
Power-On Self
Test (POST)
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
TROUBLESHOOTING
Power-On Self Test (POST)
Configuration
Diagnostic error
codes
POST is a series of diagnostic tests that run automatically when the system is turned on. After the
computer is turned on, POST checks the following assemblies to ensure that the computer system is
properly functioning:
Troubleshooting
without
diagnostics
■
■
■
■
■
■
■
Keyboard
System board
Memory modules
Video memory
Diskette drives
Hard drive
Power supply
POST also detects the type of mass storage devices installed in the computer.
If POST finds an error in the system, an error condition is indicated by an audible and/or visual
message. The table below gives explanations of the error codes and a recommended course of action.
NOTE:
An external speaker must be installed into the speaker output connector to
hear audible beeps during POST.
Click a link below to find the probable cause and recommended action for a given error message.
Diskette Drive A Error
Keyboard Controller Error
System BIOS Shadowed
Extended RAM failed at
offset nnn
Keyboard Error
System Cache Error
Failing Bits nnn
Operating System Not
Found
System CMOS Checksum Bad
Fixed Disk 0 or 1 Failure
Parity Check 1
System RAM Failed at Offset, nnn
Fixed Disk Controller Failure
Parity Check 2
System Timer Error
Incorrect Drive A Type
Real Time Clock Error
UMB Upper Limit Segment
Address nnn
Invalid NVRAM Media Type
System Battery is Dead
Video BIOS Shadowed
POST Messages
Error message
Probable Cause
Recommended Action
Diskette Drive A
Error
Drive A: is present, but fails the BIOS
POST diskette tests
1. Run Setup.
2. Replace the signal cables.
3. Replace the drive.
Extended RAM
failed at offset nnn
Extended memory not working or not
configured properly
1. Replace the memory modules.
2. Replace the system board.
Failing Bits nnn
nnn is a map of the bits at the RAM
address which failed the memory test
1. Run Setup.
2. Replace the system board.
Fixed Disk 0 or 1
Failure
Hard drive is not working or not
configured properly
1. Run Setup.
2. Replace the signal cable.
3. Replace the hard drive.
Fixed Disk
Controller Failure
Hard drive is not working or not
configured properly
1. Run Setup.
2. Replace the system board.
Incorrect Drive A
Type
Type of diskette in drive A: not
correctly identified
1. Run Setup.
2. Replace the diskette drive.
Invalid NVRAM
Media Type
Problem with NVRAM (CMOS) access
Replace the system board.
Keyboard Controller
Error
Keyboard, I/O keyboard controller (on
system board), or mouse error
1. Replace the keyboard.
2. Replace the mouse.
3. Replace the system board.
Keyboard Error
Keyboard, I/O keyboard controller (on
system board), or mouse error
1. Replace the keyboard.
2. Replace the mouse.
3. Replace the system board.
Operating System
Not Found
Operating system cannot be located on
either drive A: or C:
Run Setup.
Parity Check 1
Parity error found in the system bus
1. Run Setup.
2. Replace the memory modules.
3. Replace the system board.
Parity Check 2
Parity error found in the I/O bus
1. Run Setup.
2. Replace the ISA board (modem).
Real Time Clock
Error
Real-time clock fails BIOS test
Replace the system board.
System Battery is
Dead
RTC battery is dead
1. Replace the RTC battery.
2. Run Setup.
System BIOS
Shadowed
System BIOS copied to Shadow RAM
Status message. No action required.
System Cache Error
RAM cache failed the BIOS test
Run Setup.
System CMOS
Checksum Bad
CMOS is corrupted or modified
incorrectly
Run Setup.
System RAM Failed
at Offset, nnn
System RAM failed
Replace memory modules.
System Timer Error
DMA, timers, etc.
Replace the system board.
UMB Upper Limit
Segment Address
nnn
Displays the address nnn of the upper
limit of Upper Memory Blocks,
indicating released segments of the
BIOS
Status message. No action required.
Video BIOS
Shadowed
Video BIOS successfully copied to
shadow RAM
Status message. No action required.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/post.html [12/10/2002 9:18:30 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Clearing CMOS
Power-On Self
Test (POST)
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
TROUBLESHOOTING
Configuration
Configuration
Diagnostic error
codes
This section explains how to use Setup and Compaq Utilities which should be accessed in the following
instances:
Troubleshooting
without
diagnostics
■
■
■
■
When a system configuration error is detected during the Power-On Self-Test
(POST)
To change factory default settings for some of the computer features
To change the system configuration, which is sometimes necessary when you add
or remove optional hardware
To set system configuration features
Click a link below to go to the appropriate subsection.
Preparing the Computer
Setup
Accessing Compaq Utilities Options
View System Information (INSPECT)
Preparing the Computer
If you encounter an error condition, complete the following steps before starting problem isolation
procedures:
1
Ensure proper ventilation. The computer should have a 3-inch (7.6 cm) clearance
at the back of the system unit.
2
Turn off the computer and peripheral devices.
CAUTION: Always ensure that the power is off before
CAUTION.GIF
disconnecting or reconnecting the mouse, keyboard, or any other
(182
peripheral devices. Disconnecting or connecting the keyboard or
bytes) mouse while the unit power is on can damage the system board.
3
Disconnect any peripheral devices other than the monitor and keyboard. Do not
disconnect the printer if you want to test it or use it to log error messages.
4
Install loop-back and terminating plugs for complete testing.
Setup
The Setup utility gives a snapshot of the computer's hardware configuration, aids in troubleshooting,
and sets custom features. Setup recognizes a new internal component or an external device and
automatically updates the configuration screens. Use the Setup utility to:
■
■
■
■
Modify settings for audio, storage, power management, communications, and
input devices
Get an overall picture of the computer's hardware configuration
Verify configuration parameters in determining problems
Set time and date
Running Setup
To access the Setup utility, turn on the computer and press the F10 key when the Compaq logo
appears. A menu will appear on your screen.
NOTE:
The actual menu displayed on your computer may
vary slightly, depending on your configuration.
Accessing Compaq Utilities Options
This section provides information about the menu options accessible from the Compaq Utilities
menu.
Create a Compaq Utilities Diskette
A Compaq Utilities diskette must be created to troubleshoot the system. To create a Compaq Utilities
diskette, complete the following steps:
1 Insert the QuickRestore CD into the CD drive.
2 From the Windows desktop, click on Start, then Program, then Windows
Explorer.
3 Click on the CD drive icon.
4 Double-click on the PCdiags folder.
5 Insert a diskette in the diskette drive.
6 Double-click on the QRST5.exe icon.
7 Press Enter when the QuickRestore label appears.
8 After the CD has completed copying to the diskette, eject the QuickRestore CD.
Running Compaq Utilities
To run Compaq Utilities, turn on or reboot the computer with the Compaq Utilities diskette in the
diskette drive. A menu will appear on your screen.
View System Information (INSPECT)
The View System Information (INSPECT) utility provides information about the system once it has
been configured. INSPECT operates with MS-DOS and provides information about the system
operating environment including:
■
■
■
■
■
■
■
Contents of the operating system startup files
Current memory configuration
ROM version
Type of processor and coprocessor
Diskette and hard drives
Active printer and communications interfaces
Modem
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/config.html [12/10/2002 9:18:46 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
MSG index
Product Description
Troubleshooting
Illustrated Parts Catalog
Home
Removal & Replacement
Jumper & Switch Information
Specifications
Clearing CMOS
Power-On Self
Test (POST)
TROUBLESHOOTING
Diagnostic Error Codes
Configuration
Diagnostic error
codes
Troubleshooting
without
diagnostics
Diagnostic error codes occur if the system recognizes a problem while running the Compaq Utilities
program. These error codes help identify possibly defective subassemblies.
Tables listed on this page give possible error codes, descriptions of each error condition, and actions
required to resolve the error condition.
IMPORTANT:
Retest the system after completing each step. If the problem has
been resolved, do not proceed with the remaining steps.
For assistance in the removal and replacement of a particular subassembly, see Removal and
Replacement Procedures.
100xx
Processor
1100-xx
Serial
3300xx
CD or DVD Drive
200xx
Memory
1200-xx
Modem
3300xx
CD-RW Drive
300xx
Keyboard
1700-xx
Hard drive
8600xx
Pointing device
interface
400xx
Parallel (printer)
2400-xx
Video
600xx
Diskette drive
3200-xx
Audio
Keyboard error codes
Error
Code
Description
Recommended Action
301-xx
Keyboard short test, 8042
self-test failed
The following steps apply to error codes 301xx through 304-xx:
302-xx
Keyboard long test failed
303-xx
Keyboard LED test, 8042
self-test failed
304-xx
1
Check the keyboard connection. If
disconnected, turn the computer off
and connect the keyboard.
2
Replace the keyboard and retest.
3
Replace the system board and retest.
Keyboard typematic test
failed
Modem error codes
Error
Code
Description
Recommended Action
1201-xx
Modem Internal Loop-Back
Test
The following steps apply to error codes
1201-xx through 1210-xx:
1202-xx
Modem Time-Out Error
1
1203-xx
Modem External Termination
Test
Refer to modem documentation for
correct Setup procedures.
2
Check the modem line.
3
Replace the modem and retest.
1204-xx
Modem Auto Originate Test
1206-xx
Dial Multifrequency Tone Test
1210-xx
Modem Direct Connect Test
Diagnostic Error Codes, continued
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/diags.html [12/10/2002 9:19:02 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
MSG index
Product Description
Troubleshooting
Illustrated Parts Catalog
Home
Removal & Replacement
Jumper & Switch Information
Specifications
Clearing CMOS
Power-On Self
Test (POST)
TROUBLESHOOTING
Diagnostic Error Codes (continued)
Hard drive error codes
Configuration
Diagnostic error
codes
Troubleshooting
without
diagnostics
Error
Code
Description
Recommended Action
1700xx
Hard drive ID types test failed
The following steps apply to error codes 1700xx through 1799-xx:
1701xx
Hard drive format test failed
1702xx
Hard drive read test failed
1703xx
Hard drive write/read/compare
test failed
1704xx
Hard drive random seek test
failed
1705xx
Hard drive controller test failed
1706xx
Hard drive ready test failed
1707xx
Hard drive recalibration test
failed
1708xx
Hard drive format bad track
test failed
1709xx
Hard drive reset controller test
failed
1710xx
Hard drive park head test failed
1714xx
Hard drive file write test failed
1715xx
Hard drive head select test
failed
1716xx
Hard drive conditional format
test failed
1717xx
Hard drive ECC* test failed
1719xx
Hard drive power mode test
failed
1719-x
Hard drive power mode test
failed
1730-x
Fixed Disk 0 does not support
DMA Mode
1731-x
Fixed Disk 1 does not support
DMA Mode
1740-x
Fixed Disk 0 failed Set Block
Mode command
1741-x
Fixed Disk 1 failed Set Block
Mode command
1750-x
Fixed Disk 0 failed Identify
command
1751-x
Fixed Disk 1 failed Identify
command
1760-x
Fixed Disk 0 does not support
Block Mode
1761-x
Fixed Disk 1 does not support
Block Mode
1790-x
Disk 0 Configuration Error
1792-x
Secondary Disk Controller
Failure
1799xx
Invalid hard drive type failed
1 Run Setup and verify drive type.
2 Replace the hard drive signal and power
cables and retest.
3 Replace the hard drive and retest.
4 Replace the system board and retest.
*Error Correction Code
Pointing device interface error codes
Error
Code
Description
Recommended Action
8601xx
Pointing Device Interface
test failed
1. Replace with a working pointing device and retest.
2. Replace the system board and retest.
Audio error codes
Error
Code
Description
Recommended Action
3206xx
Audio System Internal
Error
Replace the system board and retest.
CD-RW Drive error codes
Error
Code
Description
Recommended Action
xxxx-xx
CD-RW drive
The following steps apply to error codes xxxx-xx
through xxxx-xx and xxxx-xx:
1
2
3
4
CD or DVD Drive error codes
Error
Code
Description
Recommended Action
3301-xx
3305-xx
66XX-xx
CD or DVD
drive read test
failed
The following steps apply to error codes 3301-xx
through 3305-xx and 66XX-xx:
1 Replace the CD or DVD disk and retest.*
2 Check the jumper settings on the CD or DVD
drive.
3 Check and/or replace the power and signal
cables and retest.
4 Replace the CD or DVD drive and retest.
* Boot to DOS (Command Prompt only) or Windows (Not Safe Mode). Press
the CD or DVD drive eject button (located on the front bezel) to eject the CD or
DVD and retest.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/diags2.html [12/10/2002 9:19:09 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Clearing CMOS
Power-On Self
Test (POST)
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
TROUBLESHOOTING
Troubleshooting Without Diagnostics
Configuration
Diagnostic error
codes
Troubleshooting
without
diagnostics
This section describes some simple, preliminary tests and guidelines for troubleshooting the
computer.
Checklist For Solving Minor Problems
If you encounter some minor problem with the computer or software application,
go through the following checklist for possible solutions before running any of the diagnostic utilities:
■
■
■
■
■
■
■
■
■
Is the computer connected to a working power outlet?
Is the computer turned on and the power light illuminated?
Are all cables connected properly and seated?
Are all of the necessary device drivers installed?
Is the CONFIG.SYS file correct?
Is the AUTOEXEC.BAT file (MS-DOS) or STARTUP.CMD file correct?
Was a nonbootable diskette loaded in the diskette drive at power-up?
Are all switch settings correct?
Was Computer Setup run after installing options (memory, disk drives, etc.) and
before installing industry standard architecture boards?
Quick checks and possible solutions for problems related to these topics:
Digital Dashboard
CD drive
Hard drive
Diskette drive
Hardware installation
USB ports
Power
are provided in the tables below. The procedure for resolving hardware conflicts is also described.
CD drive
Problem
Probable
cause(s)
Possible solution
Cannot read
compact disc.
CD is not properly
seated in the drive.
Eject the CD, then re-insert it, pressing down
on the CD firmly to correctly seat it in the
drive.
CD has been loaded
upside down.
Eject the CD, turn it over, then reload.
CD may be dirty or
scratched.
Clean the CD or load another CD.
Cannot eject
compact disc
(tray-load
only).
CD is not properly
seated in the drive.
Turn off the computer, insert a straightened
paper clip into the emergency eject hole, then
push firmly. Slowly pull the tray out from the
drive until the tray is fully extended, then
remove the CD.
CD drive devices
are not
detected.
Power cycle delay.
After turning the computer off, wait 30
seconds before turning the computer on again.
CD drive is not
connected properly.
Open the computer and check to see that the
drive cable is connected properly.
Proper driver is not
loaded
Restart the system and make sure the CD
drive drivers are loaded.
DVD drive
Problem
Probable cause(s)
Possible solution
Cannot
read DVD
disk
DVD or CD is not properly
seated in the drive.
Eject the DVD or CD, press down on the DVD or
CD firmly to correctly seat it in the drive, then
reload.
DVD or CD has been
loaded upside down.
Eject the disk, turn it over, then reload.
DVD or CD disk may be
dirty or scratched.
Load another DVD disk.
DVD does
not work in
the DOS
mode.
Proper drivers are not
loaded.
Restart the system and make sure the DVD
drive drivers are loaded.
Cannot
eject DVD
disk.
The system is in the
Sleep mode.
Press the Power button to bring the system back
to full power, then eject the DVD.
The DVD, diskette, or
hard drive was active
when attempting to eject
the DVD.
Wait until all drive activity ends (the CD/hard
drive light and diskette drive light will go out),
then try to eject the DVD.
DVD disk is not properly
seated in the drive.
Turn off the computer, insert a straightened
paper clip into the emergency eject hole, then
push firmly. Slowly pull the tray out from the
drive until the tray is fully extended, then
remove the DVD disk.
DVD drive is not
connected properly.
Open the computer and check to see that the
drive cable is connected properly.
Incorrect driver is
installed.
Ensure the correct driver is installed in
CONFIG.SYS.
Drive has been changed.
Make sure the jumper setting is set for "Slave."
Proper drivers are not
loaded.
Restart the system and make sure the DVD
drive drivers are loaded.
DVD drive
devices are
not
detected.
Digital Dashboard
Problem
Probable cause(s)
Possible solution
Digital
Dashboard
displays
component
icons
Digital Dashboard has not
detected system
components.
When the power button is pressed, the
computer will power-on. The LCD display will
display the following icons: keyboard, mouse,
and monitor. If any of these components are not
detected, the icons will continue to be displayed.
If these components are found, the icons will
disappear.
Digital
Dashboard
display is
blank
Check the power cable
connection to the system
board.
When the power cable is properly connected, the
LCD display will display,"Push To Start."
Resolving Hardware Conflicts
Hardware conflicts occur when two or more peripheral devices attempt to use the same hardware
resources. I/O addresses, interrupts, and DMA channels are the most common hardware resources
used by peripheral devices.
Base I/O address
220H
Interrupt
IRQ 5
8-bit DMA
Channel 1
When different peripheral devices use the same hardware resources at the same time, the devices
and/or the system may not function properly. You can resolve hardware conflicts by ensuring that no
devices are configured to use the same hardware resources. These resources can either be dipswitch
or jumper settings on the peripheral card or software configurable resources. The Computer Setup
selection of your Compaq Utilities allows you to view and modify the settings for the peripheral
devices factory installed in your system. Refer to the User's Guide for the particular peripheral cards
you wish to install for information on how to view and select their settings.
To resolve hardware conflicts:
1
Change the hardware settings of your audio card or other peripheral card in your
system if the peripheral card is using any settings used by the factory-installed
devices.
2
If you are unsure of the settings of the peripheral cards, you can isolate the
source of the problem by temporarily removing all cards not manufactured by
Compaq, or resetting the default settings and running Compaq Utilities. After
that, add the cards back one at a time until the card that is causing the conflict is
found.
Also see: System
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/trbnod1.html [12/10/2002 9:19:21 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
MSG index
Product Description
Troubleshooting
Illustrated Parts Catalog
Home
Removal & Replacement
Jumper & Switch Information
Specifications
Clearing CMOS
Power-On Self
Test (POST)
TROUBLESHOOTING
Troubleshooting Without Diagnostics (continued)
Configuration
Hard drive
Diagnostic error
codes
Troubleshooting
without
diagnostics
Problem
Probable cause(s)
Possible solution
Hard drive error
occurs.
Hard disk has bad
sectors or has failed.
Run Computer Setup.
Reformat the hard disk.
Drive not found.
Cable could be
loose.
Check cable connections.
Disk transaction
problem.
Either the directory
structure is bad or
there is a problem
with a file.
From the desktop click on the Start menu. Choose
Accessories
System Tools
Program
Scandisk to check for problems. If problems exist,
run Scandisk and checkmark the "Automatically fix
errors" box at the bottom to correct the problems.
If a large number of lost allocation units is found,
click on the Start menu. Choose Program
System Tools
Disk Defragmenter.
Accessories
Nonsystem disk
message.
The system is trying
to start from a
diskette that is not
bootable.
Remove the diskette from the diskette drive.
The system is trying
to start from the
hard drive but the
hard disk has been
damaged.
Insert a bootable diskette into the diskette drive
and restart the computer with Ctrl+Alt+Del.
Diskette boot has
been disabled in
Computer Setup.
Run Computer Setup and enable diskette boot.
The hard disk files
may be fragmented.
From the desktop click on the Start menu. Choose
Accessories
System Tools
Program
Scandisk to check for problems. If problems exist,
run Scandisk and checkmark the "Automatically fix
errors" box at the bottom to correct the problems.
If a large number of lost allocation units is found,
click on the Start menu. Choose Program
System Tools
Disk Defragmenter.
Accessories
Hard drive
operation seems
slow
OR
Hard drive
activity light is
not on,
or stays on
without blinking.
Hardware installation
Problem
Probable cause(s)
Possible solutions
A new device is
not recognized
as part of the
computer
system.
When the system advised you of
changes to the configuration,
you did not save the changes.
Reboot the computer and follow the
instructions for saving the changes.
The system may not have
automatically recognized the
new device.
Run Computer Setup and identify the
new device.
The cables for the new external
device are loose, or the power
cables are unplugged.
Check all cables.
The power switch for the new
external device is not turned on.
Turn off the computer, turn on the
external device, and then turn on the
computer to integrate the new device
with the computer.
Power
Problem
Possible Solution
Computer will not turn on.
Ensure that the computer is connected to a power
source.
Computer does not automatically
display the date and time.
The real-time clock (RTC) battery may need to be
replaced. Click here for replacement procedures.
Computer does not beep during
POST.
The speaker volume may have been turned down. Select
the Volume option from the Control Panel and adjust the
volume.
Computer powered off
automatically.
The unit temperature may have been exceeded. Check
the fan for function and blockage.
USB
Problem
Probable cause(s)
Possible solution
Port 3
cannot
work with
any slow
speed
devices.
The device is plugged
into the wrong port.
Check to see if the keyboard is plugged into Port
3.
USB device
does not
work with
the system.
The USB device and the
system may use
different USB
architectures.
Ensure that the USB device is properly inserted
into the port.
Ensure that the USB device and the system share
the same USB architecture. (UHCI-compliant
devices will only work with a UHCI-compliant
system, and OHCI-compliant devices will only
work with a OHCI-compliant system).
Diskette Drive
Problem
Probable cause(s)
Possible solution
Diskette drive
light stays on.
Diskette may be damaged.
From the desktop click on the
Start menu. Choose Program
System Tools
Accessories
Scandisk to check for problems.
Diskette may be installed
incorrectly.
Remove the diskette and reinsert.
Software program may be
damaged.
Check the program diskettes.
Diskette is not formatted.
Format the diskette.
Diskette is write-protected.
Either use another diskette that is
not write-protected or disable the
write protection on the diskette.
Writing to the wrong drive.
Check the drive letter in your path
statement.
Not enough space is left on the
diskette.
Use another diskette to write the
information.
Diskette is not formatted.
Format the diskette.
Using the wrong diskette type for
the drive type.
Use a diskette that is compatible
with the drive.
Reading the wrong drive.
Check the drive letter in your path
statement.
Diskette drive has been disabled
by Computer Setup.
Run Computer Setup and enable
the diskette drive.
Diskette drive
cannot write
to a diskette.
Diskette drive
cannot read a
diskette.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/trbnodg.html [12/10/2002 9:19:28 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Power
Supply/Fan
Assembly
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
SPECIFICATIONS
System Specifications
Diskette
drive
General system specifications
System interrupts
System
System I/O
DVD or CD
and
CD-RW drive
System memory
Mouse
System DMA
Fax/modem
General System Specifications
Dimensions
Information not Available
Height
in
Length
in
Width
in
Weight
lbs.
Input
Requirements
Nominal Line Voltage
Range Line Voltage
115/230 VAC.
90-132 VAC,180-264 VAC.
Line Frequency
Input Current
47-63HZ
4.5A RMS@Max Load
Power (watts)
Steady State
145W
Environmental Requirements
Temperature
Operating
50° to 95° F
10° to
35° C
Shipping
-4° to 140° F
-20° to
60° C
Operating
8% to 90%
8% to
90%
Nonoperating
5% to 95%
5% to
95%
Humidity (noncondensing)
Maximum Altitude (unpressurized)
Operating
10,000 ft
3048 m
Nonoperating
30,000 ft
9144 m
System Interrupts
Hardware IRQ
System Function
IRQ 0
System timer
IRQ 1
Motherboard resources
IRQ 2
Programmable interrupt controller
IRQ 3
ACPI IRQ Holder for PCI IRQ Steering
IRQ 3
Intel(R) 810e Chipset Graphics Driver (DC133
FSB133) 4.11.01.1321
IRQ 4
Motherboard resources
IRQ 5
Intel(r) 82801AA SMBus Controller
IRQ 5
SoundMAX Integrated Digital Audio
IRQ 5
ACPI IRQ Holder for PCI IRQ Steering
IRQ 6
Standard Floppy Disk Controller
IRQ 8
System CMOS/real time clock
IRQ 9
SCI IRQ used by ACPI bus
IRQ 11
ACPI IRQ Holder for PCI IRQ Steering
IRQ 11
ACPI IRQ Holder for PCI IRQ Steering
IRQ 11
Texas Instruments OHCI IEEE 1394 Host
Controller
IRQ 11
Intel(r) 82801AA USB Universal Host Controller
IRQ 12
Motherboard resources
IRQ 13
Numeric data processor
IRQ 14
Primary IDE controller (dual fifo)
IRQ 14
Intel(r) 82801AA Ultra ATA Controller
IRQ 15
Secondary IDE controller (dual fifo)
IRQ 15
Intel(r) 82801AA Ultra ATA Controller
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/spec.html [12/10/2002 9:19:38 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System
Power
supply/Fan
Assembly
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
SPECIFICATIONS
System Specifications (continued)
General system specifications
Diskette
drive
Video memory
Hard drives
System interrupts
CD or DVD
and CD-RW
drives
System I-O
System memory
Mouse
System DMA
Fax/modem
System I/O
I/O Address (Hex)
System Function (Shipping Configuration)
0000h-000Fh
Direct memory access controller
0010h-001Fh
Motherboard resources
0020h-003Fh
Programmable interrupt controller
0040h-0043h
System timer
004Eh-004Fh
Motherboard resources
0050h-0052h
Motherboard resources
0060h-0060h
Motherboard resources
0061h-0061h
System speaker
0064h-0064h
Motherboard resources
0070h-0071h
System CMOS/real time clock
0072h-0077h
Motherboard resources
0080h-008Fh
Direct memory access controller
0090h-009Fh
Motherboard resources
00A0h-00BFh
Programmable interrupt controller
00C0h-00DFh
Direct memory access controller
00F0h-00FFh
Numeric data processor
0170h-0177h
Secondary IDE controller (dual fifo)
0170h-0177h
Intel(r) 82801AA Ultra ATA Controller
01F0h-01F7h
Intel(r) 82801AA Ultra ATA Controller
01F0h-01F7h
Primary IDE controller (dual fifo)
0376h-0376h
Intel(r) 82801AA Ultra ATA Controller
0376h-0376h
Secondary IDE controller (dual fifo)
0390h-0397h
Motherboard resources
03B0h-03BBh
Intel(R) 810e Chipset Graphics Driver (DC133 FSB133)
4.11.01.
03C0h-03DFh
Intel(R) 810e Chipset Graphics Driver (DC133 FSB133)
4.11.01.
03F0h-03F5h
Standard Floppy Disk Controller
03F6h-03F6h
Primary IDE controller (dual fifo)
03F6h-03F6h
Intel(r) 82801AA Ultra ATA Controller
0400h-047Fh
Motherboard resources
04D0h-04D1h
Motherboard resources
0CF8h-0CFFh
PCI bus
2000h-20FFh
SoundMAX Integrated Digital Audio
2400h-243Fh
SoundMAX Integrated Digital Audio
2460h-246Fh
Intel(r) 82801AA Ultra ATA Controller
2460h-2467h
Primary IDE controller (dual fifo)
2468h-246Fh
Secondary IDE controller (dual fifo)
EE00h-EE7Fh
Motherboard resources
EE80h-EEBFh
Motherboard resources
EEC0h-EEDFh
Intel(r) 82801AA USB Universal Host Controller
EEE0h-EEEFh
Intel(r) 82801AA SMBus Controller
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/syspec.html [12/10/2002 9:19:45 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System
Power
supply/Fan
Assembly
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
SPECIFICATIONS
System Specifications (continued)
Diskette
drive
CD or DVD
and CD-RW
drives
Mouse
General system specifications
Video memory
System interrupts
System I-O
System memory
Fax/modem
System DMA
Memory Address
System Function
00000000h-0009FFFFh
System board extension for ACPI BIOS
000A0000h-000AFFFFh
Intel(R) 810e Chipset Graphics Driver (DC133 FSB133)
000B0000h-000BFFFFh
Intel(R) 810e Chipset Graphics Driver (DC133 FSB133)
000E0000h-000FFFFFh
System board extension for ACPI BIOS
00100000h-07FFFFFFh
System board extension for ACPI BIOS
40000000h-40003FFFh
Texas Instruments OHCI IEEE 1394 Host Controller
40000000h-403FFFFFh
Intel(r) 82801AA PCI Bridge
40300000h-403007FFh
Texas Instruments OHCI IEEE 1394 Host Controller
40400000h-4047FFFFh
Intel(R) 810e Chipset Graphics Driver (DC133 FSB133)
44000000h-47FFFFFFh
Intel(R) 810e Chipset Graphics Driver (DC133 FSB133)
FFB80000h-FFBFFFFFh
System board extension for ACPI BIOS
FFF80000h-FFFFFFFFh
System board extension for ACPI BIOS
System DMA
Hardware
System Function (Default)
DMA 2
Standard Floppy Disk Controller
DMA 4
Direct memory access controller
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/specdeta.html [12/10/2002 9:19:49 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
SPECIFICATIONS
DVD or CD
and
CD-RW drive
Diskette
drive
Power Supply/Fan Assembly
U. S.
Input Specifications
Power
Supply/Fan
Assembly
Nominal Line Voltage
115 to 230 VAC
Range Input Line
90 to 264 VAC
Frequency Range
47 to 63 Hz AC
Input Current
115V
Input Current
4.5A RMS@Max Load
Output Power
145 Watts
Inrush Current
80 A at 132 VAC
(cold start)
Holdup Time
16 ms from zero
Mouse
Fax/modem
Environment
3.00 AMPS
Temperature Range
Operating
10 to +50 ° C
Non-Operating
-40 to +66 ° C
Humidity
Operating
Storage
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/pwrspcs.html [12/10/2002 9:19:53 AM]
Non Condensing
20% to 90% RH
5% to 95% RH
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
System
SPECIFICATIONS
Power
Supply/Fan
Assembly
Diskette drive
USB Mouse
Dimensions
U. S.
Metric
Weight w/cable
4.59 oz
130 g
Base Resolution
400 dpi
15.8 dpmm
Tracking Speed (maximum)
10 in/sec
25 cm/sec
0° C to + 40° C
-20° C to + 60° C
32° F to 104° F
4° F to 140° F
Exceeds 300 miles
Exceeds 1 million
operations
Exceeds 483 km
Exceeds 1 million
operations
Mouse
DVD or CD and
CD-RW drive
Height
Length
Width
Fax/modem
Temperature
Operating
Non-Operating
Lifetime
Mechanical
Switch
Relative Humidity
10% to 90%, noncondensing at ambient.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/mousspc.html [12/10/2002 9:19:57 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System
Power
Supply/Fan
Assembly
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
SPECIFICATIONS
DVD Drive
Information for the DVD, CD, and CD-RW drives immediately follows.
Diskette
drive
CD or DVD
and
CD-RW drive
Dimensions
Width
Height
Depth
8x DVD Drive
U. S.
in
in
in
Metric
cm
cm
cm
Mouse
Fax/modem
Weight
Modes Supported
lb
kg
Block Size
Center Hole
Diameter
Thickness
Track Pitch
Access Time
Random
Full Stroke
Audio Output Level
Line Out
Headphone
Cache Buffer
Data Transfer Rate
Sustained
Burst
Startup Time
Stop Time
CD Drive
Information for the 40x CD drive immediately follows.
Dimensions
Width
Height
Depth
40× CD Drive
U. S.
in
in
in
Weight
Modes Supported
CD-ROM
CD-DA
CD-XA
Photo CD
Video-CDI
CD-Plus/CDExtra/CD Enhanced
CD-RW
lb
Metric
cm
cm
cm
kg
Mode 1 and Mode 2
Audio
Mode 2, Form 1 and 2
Multiple Session
Multiple Session
Multiple Session
Multiple Session
Block Size
CD-ROM
Mode 1 and Mode 2 Form 1
(XA)
CD-ROM Mode 2
CD-DA
CD-XA
Center Hole
Diameter
Thickness
Track Pitch
Access Time
Random
Full Stroke
Audio Output Level
Line Out
Headphone
Cache Buffer
Data Transfer Rate
2048 bytes
2336 bytes
2324 bytes
2324 bytes
1.5 mm diameter
120 mm / 80mm
1.2 mm
1.6 µm
< 95 ms
< 190 ms
0.7 Vrms + 20%
0.6 Vrms + 20%
256 KB
Mode 1
4800 KB/sec
KB/sec (32×)
MB/sec
Sustained
Burst
Startup Time
Stop Time
Mode 2
5475 KB/sec
KB/sec (32×)
MB/sec
< 5 sec
< 5 sec
CD-RW Drive
Information for the CD-RW drive immediately follows.
Dimensions
Width
Height
Depth
CD-RW Drive
U. S.
in
in
in
Weight
Modes Supported
CD-ROM
CD-DA
CD-XA
Photo CD
Video-CDI
CD-Plus/CDExtra/CD Enhanced
CD-RW
Block Size
CD-ROM
Mode 1 and Mode 2 Form 1
(XA)
CD-ROM Mode 2
CD-DA
CD-XA
Center Hole
Diameter
Thickness
Track Pitch
Access Time
Random
Full Stroke
Audio Output Level
Line Out
Headphone
Cache Buffer
Data Transfer Rate
Sustained
Burst
Startup Time
Stop Time
lb
Metric
cm
cm
cm
kg
Mode 1 and Mode 2
Audio
Mode 2, Form 1 and 2
Multiple Session
Multiple Session
Multiple Session
Multiple Session
2048 bytes
2336 bytes
2324 bytes
2324 bytes
1.5 mm diameter
120 mm / 80mm
1.2 mm
1.6 µm
< 95 ms
< 190 ms
0.7 Vrms + 20%
0.6 Vrms + 20%
256 KB
Mode 1
4800 KB/sec
KB/sec (32×)
MB/sec
< 5 sec
< 5 sec
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cdspecs.html [12/10/2002 9:20:01 AM]
Mode 2
5475 KB/sec
KB/sec (32×)
MB/sec
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
SPECIFICATIONS
Fax/Modem
Power
Supply/Fan
Assembly
Diskette
drive
General Description
Support
Supports K56flex and/or ITU-T V.90
14400bps send and receive fax modem with
automatic fallback to 12000, 9600, 7200, 4800,
and 2400bps.
Support fax service Class 1 (EIA/TIA 578).
Support V.80 video ready modem.
Built-in DTE interface with speed up to 115.2kbps
or 57.6kbps, parallel 16550a UART-compatible
interface.
Fax/modem
Mouse
DVD or CD
and
CD-RW drive
Power Management Registers to PCI Interface.
Data Mode
K56flex and/or ITU-T V.90 56kbits/s for highest
Internet connection rates
Ultrahigh compression throughput due to parallel
access directly to the host PC.
ITU-T V.34 extended rates 33600bps to 2400bps.
V.32terbo, V.32bis and fallbacks.
TIA/EIA 602 standard for AT command set.
V.42 error correction (LAM and MNP).
V.42bis and MNP Class 5 data compression.
Fax Mode
Fax modem send and receive rates up to
14400bps
* V.17, V.29, V.27ter, and V.21 channel 2 *
TIA/EIA 578 Class 1 FAX
Error Correction
ITU-T recommended V.42 error correction.
V.42 error correction (LAM and MNP).
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/faxspcs.html [12/10/2002 9:20:05 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
SPECIFICATIONS
Power
Supply/Fan
Assembly
DVD or CD
and
CD-RW drive
Diskette Drive
Diskette
Size (in)
High Density (MB)
Diskette
drive
Mouse
Fax/modem
Light
Height
Bytes per Sector
Sectors per Track
High Density
3.5 (8.89 cm)
1.44
Green
One-third
512
18
Tracks per Side
High Density
80
Low Density
80
Rotational Speed
Read/Write Heads
Average Seek Time (ms)
Track-to-Track
Settling Time
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/fpyspc.html [12/10/2002 9:20:10 AM]
300 RPM
2
3
15 (Max)
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
JUMPER & SWITCH INFORMATION - INDEX PAGE
System Board
CD and DVD and CD-RW Drive
Hard Drives
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/jmprsw.html [12/10/2002 9:20:23 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
System board
JUMPER & SWITCH INFORMATION
Hard drives
System Board Index
CD or DVD and
CD-RW drive
System Board Connectors
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/bdjum.html [12/10/2002 9:20:25 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System
board
Hard drives
CD and CDRW drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
JUMPER & SWITCH INFORMATION
System Board Connectors
Function
Description
Video
15-pin VGA
Microphone in
Mini stereo
Audio Line out
Mini stereo
(2) DIMM sockets
168-pin DIMM
(3) PCI slots
32-bit PCI connector
Line in
Mini stereo
LCD Panel (Digital Dashboard)
10 pin header
Battery socket
2-pin socket
IDE drives
40-pin headers, key 20
Diskette drive
34-pin header
Fan with active heatsink
3-pin header
Power supply
20-pin header
USB (Used for Keyboard)
2 ports on Rear connector
2 ports on Front 10 pin header
1394
2 ports on Front 10 pin header
Clear CMOS jumper
3 pin header
Top of Page
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/bdjum1.html [12/10/2002 9:20:27 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
System board
JUMPER & SWITCH INFORMATION
Hard drives
Hard Drives
CD or DVD and
CD-RW drive
Compaq Computer Corporation uses IDE hard disk drives that conform to two different device
0/device 1 implementations. These are Conner mode and ATA-compatible mode. These two modes
are incompatible with one another.
IMPORTANT:
Jumper settings are shown on top of the hard drives.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/hdjum.html [12/10/2002 9:20:29 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Product Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
Home
System board
JUMPER & SWITCH INFORMATION
Hard drives
CD and DVD Drive
CD or DVD and
CD-RW drive
Optical Device Type
Optical Device Speed
Optical Device Transfer Rate
Interface
Transport Type
CD
40x
From 2500 to 6000KB/s
ATAPI
Tray Load
CD-RW Drive
Optical Device Type
Device Recording Speed
Device ReWrite Speed
Device CD Read Speed
Storage Capacity:Data
Storage Capacity:Music
Interface
Transport Type
CD-RW
4x Max
2x Max
24x Max
650MB
74 Minutes
EIDE/ATAPI
Tray Load
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cddrive.html [12/10/2002 9:20:31 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Product Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
Home
REMOVAL & REPLACEMENT PROCEDURES INDEX PAGE
This section provides general service information for Compaq Series Personal Computers.
Adherence to the procedures and precautions described in this section is essential for safe and
proper service.
Electrostatic Discharge
Service Considerations
Preparation for Disassembly
Serial Number
Left Easy Access Panel
Right Easy Access Panel
Top Access Panel
Rear Access Panel
Mass Storage Devices
Drive Cage
Hard drive
CD or DVD and CD-RW drive
Diskette drive
Fan/Power Supply Assembly
I/O Board
LCD Display Board
Speaker Assembly
System Board and Components
RTC Battery
Processor/Heatsink Assembly
Fax-Modem Board
Chassis Base
Memory Module
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/remvrep.html [12/10/2002 9:20:46 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
Home
REMOVAL & REPLACEMENT
Electrostatic Discharge (Return to Service Considerations)
A sudden discharge of static electricity from a finger or other conductor can destroy static-sensitive
devices or microcircuitry. Often the spark is neither felt nor heard, but damage occurs. An electronic
device exposed to electrostatic discharge (ESD) may not be affected at all and will work perfectly
throughout a normal cycle. Or it may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
Networks built into many integrated circuits provide some protection, but in many cases, the discharge
contains enough power to alter device parameters or melt silicon junctions.
Generating Static
The table below shows the different amounts of static electricity generated by different activities .
Relative Humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tubes
2,000 V
700 V
400 V
Removing DIPS from vinyl trays
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCBs
26,000 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
NOTE: 700 volts can degrade a product!
Preventing Electrostatic Damage to Equipment
Many electronic components are sensitive to ESD. Circuitry design and structure determine the degree of
sensitivity. The following proper packaging and grounding precautions are necessary to prevent damage:
■
■
■
■
■
Protect all electrostatic parts and assemblies with conductive or approved containers
or packaging.
Keep electrostatic sensitive parts in their containers until they arrive at static-free
stations.
Place items on a grounded surface before removing them from their container.
Always be properly grounded when touching a sensitive component or assembly.
Place reusable electrostatic-sensitive parts from assemblies in protective packaging
or conductive foam.
Use transporters and conveyors made of antistatic belts and metal roller bushings. Mechanized
equipment used for moving materials must be wired to ground and proper materials selected to avoid
static charging. When grounding is not possible, use an ionizer to dissipate electric charges.
Preventing Damage to Drives
To prevent static damage to hard drives, use the following precautions:
■
■
■
■
■
Handle drives gently, using static-guarding techniques.
Store drives in the original shipping containers.
Avoid dropping drives from any height onto any surface.
Handle drives on surfaces that have at least one inch of shock-proof foam.
Always place drives PCB assembly side down on the foam.
Grounding Methods
The method for grounding must include a wrist strap or a foot strap at a grounded workstation. When
seated, wear a wrist strap connected to a grounded system. When standing, use footstraps and a
grounded floor mat.
Static-Shielding Protection Levels
Method
Antistatic Plastic
Voltages
Carbon-Loaded
Plastic
1,500
7,500
Metallized Laminate
15,000
Grounding Workstations
To prevent static damage at the workstation, use the following precautions:
■
■
■
■
■
■
■
■
■
Cover the workstation with approved static-dissipative material. Provide a wrist strap
connected to the work surface and properly grounded tools and equipment.
Use static-dissipative mats, heel straps, or air ionizers to give added protection.
Handle electrostatic sensitive components, parts, and assemblies by the case or PCB
laminate. Handle them only at static-free workstations.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing connectors or test
equipment.
Use fixtures made of static-safe materials when fixtures must directly contact
dissipative surfaces.
Keep work area free of nonconductive materials such as ordinary plastic assembly
aids and Styrofoam.
Use field service tools, such as cutters, screwdrivers, and vacuums, that are
conductive.
Use a portable field service kit with a static dissipative vinyl pouch that folds out of a
work mat. Also use a wrist strap and a ground cord for the work surface. Ground the
cord to the chassis of the equipment undergoing test or repair.
Grounding Equipment
Use the following equipment to prevent static electricity damage to the equipment:
Wrist Straps are flexible straps with a minimum of 1 megohm ±10% resistance to the ground cords. To
provide proper ground, a strap must be worn snug against the skin. On grounded mats without bananaplug connectors, connect a wrist strap with alligator clips.
Heelstraps/Toestraps/Bootstraps can be used at standing workstations and are compatible with most
types of boots and shoes. On conductive floors or dissipative floor mats, use them on both feet with a
minimum of 1 megohm resistance between operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.
Recommended Materials and Equipment
Other materials and equipment that are recommended for use in preventing static electricity include:
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Antistatic tape
Antistatic smocks, aprons, or sleeve protectors
Conductive bins, and other assembly or soldering aids
Conductive foam
Conductive tabletop workstations with ground cord of 1 megohm of resistance
Static dissipative table or floor mats with hard tie to ground
Field service kits
Static awareness labels
Wrist straps and footwear straps providing 1 megohm ±10% resistance
Material handling packages
Conductive plastic bags
Conductive plastic tubes
Conductive tote boxes
Metal tote boxes
Opaque shielding bags
Transparent metallized shielding bags
Transparent shielding tubes
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/electro.html [12/10/2002 9:20:48 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Service
Considerations
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Service Considerations
Tool Requirements
Preparation
for
Disassembly
■
■
■
■
Phillips screwdriver
Needle-nose pliers
Flathead screwdriver
Compaq Utilities software
Serial Number
Screws
Left Easy
Access Panel
Right Easy
Access Panel
The screws used in these products are not interchangeable. If an incorrect screw is used during the
reassembly process, it could cause damage to the unit. Compaq strongly recommends that all screws
removed during the disassembly process be kept with the part that was removed, then returned to
their proper locations.
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
IMPORTANT:
Cables and Connectors
Most cables used throughout the unit are ribbon cables. These must be handled with extreme care to
avoid damage. Apply only the tension required to seat or unseat the cables during insertion or removal
from the connector. Handle cables by the connector whenever possible. In all cases, avoid bending,
twisting, or tearing the cables, and ensure that they are placed in such a way that they cannot be
caught or snagged by parts being removed or replaced.
Mass Storage
Devices
CAUTION: When servicing these computers, ensure that cables
CAUTION.GIF
are placed in their proper location during the reassembly process.
(182
Improper cable placement can cause severe damage to the unit.
bytes)
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
As each subassembly is removed from the computer, it should
be placed away from the work area to prevent damage.
Ribbon Cable Positions
CD and CD-RW Drive
Hard Drive
Diskette drive
I/O Board
Power Supply/Fan Assembly
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/service.html [12/10/2002 9:20:57 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Service
Considerations
Preparation
for
Disassembly
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Preparation for Disassembly
To prepare the computer for removal and replacement procedures, complete the following steps:
1
Remove any diskette, compact disc, or tape from the computer.
2
Turn off the computer and any peripheral devices that are connected to the
computer.
CAUTION: The computer power switch should
CAUTION.GIF
be turned off before you disconnect any cables.
(182
bytes)
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
3
Disconnect the power cord from the electrical outlet, and then from the
computer.
4
Disconnect all peripheral device cables from the computer.
Memory
Module
Top Access
Panel
IMPORTANT:
During disassembly, label each cable as you remove
it. Be sure to note its position and routing.
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/prep.html [12/10/2002 9:21:09 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Service
Considerations
Preparation
for
Disassembly
Product Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
REMOVAL & REPLACEMENT
Serial Number
The computer serial number should be provided to Compaq whenever
requesting information or ordering spare parts. The
(1) serial number is located on the back of the chassis above the voltage select
switch and inside of the front door on the base directly below the Front I/O
connectors.
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/serno.html [12/10/2002 9:21:16 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Left Easy Access Panel
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/EZleft.html [12/10/2002 9:21:20 AM]
Removal
1
Perform the preparation procedures.
2
Push the (1) panel release button and
open the left side access panel.
3
Lift the (2) Left Easy Access Panel off
the hinges on the chassis.
Replacement
To replace the Left Easy Access Panel,
reverse this procedures.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Right Easy Access Panel
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/EZright.html [12/10/2002 9:21:25 AM]
Removal
1
Perform the preparation procedures.
2
Push the (1) panel release button and
open the right side access panel.
3
Lift the (2) Right Easy Access Panel
off the hinges on the chassis.
Replacement
To replace the Right Easy Access
Panel, reverse this procedures.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Memory Module (DIMM)
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/dimm.html [12/10/2002 9:21:30 AM]
1
Perform preparation
procedures.
2
Remove the Right Easy
Access Panel.
3
Pull out on the (1)
retention clips of the
socket and (2) unplug
the DIMM from the
system board .
Replacing the DIMM
Next Step
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
REMOVAL & REPLACEMENT
Replacing the Memory Module (DIMM)
To replace the DIMM,
follow the procedure
below.
Push the (1) DIMM
down into the system
board socket and (2)
close the retention
clips.
CAUTION: Ensure
the DIMM is
properly aligned
and seated in the
CAUTION.GIF
system board
(182 socket before
bytes) reassembling the
computer.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/new15.html [12/10/2002 9:21:33 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Top Access Cover
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/network.html [12/10/2002 9:21:41 AM]
Removal
1
Perform preparation procedures.
2
Remove the Left Easy Access
panel.
3
Lift the top access cover off the
hinges on the chassis.
Replacement
To replace the top access cover,
reverse this procedures.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Rear Access Panel
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/EZrear.html [12/10/2002 9:21:45 AM]
Removal
1
Perform the preparation procedures.
2
Push the (1) panel release button and
open the rear access panel.
3
Lift the (2) rear access panel off the
hinges on the chassis.
Replacement
To replace the rear access panel,
reverse this procedures.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Fax/modem
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Removal
1
Perform preparation procedures.
2
Remove the Left Side Easy
Access panel.
3
Remove screw securing the
fax/modem to the chassis and
pull the fax/modem out of the
slot.
Replacement
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/faxrem.html [12/10/2002 9:21:51 AM]
To replace the fax/modem,
reverse this procedures.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Mass Storage Devices - Index Page
Service
Considerations
Preparation
for
Disassembly
1
Drive Cage
2
CD or DVD and CD-RW Drive
3
Hard Drive
4
Diskette Drive
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/masStrg.html [12/10/2002 9:21:55 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Hard Drive
CD or DVD
and
CD-RW Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the Drive Cage Assembly
3.5" Diskette
Drive
Mass storage
devices index
page
Removal
1
Perform preparation
procedures.
2
Remove the Left Easy Access
panel.
3
Remove the left plastic
subpanel.
4
Remove the Top Access Panel.
5
Open (1) and (2) remove the
front door from the hooks on
the chassis.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/hdcage1.html [12/10/2002 9:21:58 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Hard Drive
CD or DVD
and
CD-RW Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the Drive Cage Assembly, continued
3.5" Diskette
Drive
Mass storage
devices index
page
Removal
6
Lift the (1) left side of the
Plastic Drive Cover and (2)
pull away from the drive cage
to remove the Plastic Drive
Cover from the drive cage.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cage2.html [12/10/2002 9:22:01 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Hard Drive
CD or DVD and
CD-RW Drive
3.5" Diskette
Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the Drive Cage Assembly, continued
Mass storage
devices index
page
7
With the unit lying on right
side, remove one screw from
the (1) rear of the chassis and
lift the Drive Cage Assembly
upward straight out of the
chassis
IMPORTANT: Before removing
the drive cage from the chassis,
disconnect all the drive cables
from the drives.
Return to Section
Index
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/hdcage.html [12/10/2002 9:22:03 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
CD or DVD and
CD-RW Drive
Hard Drive
3.5" Diskette
Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Mass Storage Devices
Removing the CD or DVD and CD-RW Drive
To remove the CD or DVD and CD-RW drive, complete the following steps:
Mass storage
devices index
page
Removal
1
Perform preparation
procedures.
2
Remove the Left Easy Access
panel.
3
Remove the drive cage.
4
Disconnect the CD or DVD and
CD-RW drive data cable from
the system board.
NEXT STEP
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cdrmv.html [12/10/2002 9:22:11 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
CD or DVD and
CD-RW Drive
Hard Drive
3.5" Diskette
Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the CD or DVD and CD-RW Drive, continued
Mass storage
devices index
page
Removal
5
Remove (1) two screws from
each side of the CD or DVD
drive securing the drive to the
drive cage and (2) pull the
drive from the drive cage.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/newp4.html [12/10/2002 9:22:14 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
CD or DVD
and
CD-RW Drive
Hard Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the CD or DVD and CD-RW Drive, continued
3.5" Diskette
Drive
Removal
Mass storage
devices index
page
6
Remove (1) two screws from
each side of the CD-RW drive
securing the drive to the drive
cage and (2) pull the drive from
the drive cage.
To replace the CD or DVD and CDRW drive reverse the previous
procedure.
Return to Section Index
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/zprmv.html [12/10/2002 9:22:16 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Hard Drive
CD or DVD and
CD-RW Drive
3.5" Diskette
Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Mass Storage Devices
Removing the Hard Drive
Mass storage
devices index
page
Removal
1
Perform preparation
procedures.
2
Remove the Left Easy Access
panel.
3
Remove two screws from the
hard drive bracket securing
the bracket to the chassis.
NEXT STEP
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/hdremv.html [12/10/2002 9:22:21 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Hard Drive
CD or DVD and
CD-RW Drive
3.5" Diskette
Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the Hard Drive, continued
Mass storage
devices index
page
Removal
4
Slide the (1) hard drive
bracket with the hard drive
attached to the (2) rear of the
unit.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/newp7.html [12/10/2002 9:22:23 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Hard Drive
CD or DVD
and CD-RW
Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the Hard Drive, continued
3.5" Diskette
Drive
Mass storage
devices index
page
Removal
5
Lift up the hard drive bracket,
disconnect the (1) power and
(2) data cable from the hard
drive, and remove the hard
drive bracket with the hard
drive attached from the
chassis.
Removing the Hard Drive
Bracket
NEXT STEP
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/newp6.html [12/10/2002 9:22:26 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Hard Drive
CD or DVD and
CD-RW Drive
3.5" Diskette
Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the Hard Drive Bracket
Mass storage
devices index
page
Removal
Remove (1) two screws from
each side of the drive bracket.
Lift the (2) hard drive from the
bracket.
To replace the hard drive and
bracket reverse the previous
procedure.
Return to section index
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/hdbracket.html [12/10/2002 9:22:28 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
3.5" Diskette
Drive
Hard Drive
CD or DVD and
CD-RW Drive
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Mass Storage Devices
Removing the Diskette Drive
Mass storage
devices index
page
To remove the diskette drive,
complete the following steps:
Removal
1
Perform preparation
procedures.
2
Remove the Left Easy Access
panel.
3
Remove the drive cage.
4
Disconnect the diskette drive
data cable from the system
board.
NEXT STEP
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/remfpy.html [12/10/2002 9:22:36 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Mass Storage Devices
Removing the Diskette Drive, continued
5
Remove (1) two screws on each side of
the drive cage securing diskette drive
to the cage and (2) remove the diskette
drive from the cage.
Replacement
To replace the diskette drive, reverse
this procedure.
Return to section index
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/rmvfpy2.html [12/10/2002 9:22:39 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Power Supply/Fan Assembly
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Removal
1
Perform preparation procedures.
2
Remove the Left Easy Access panel.
3
Remove the drive cage.
4
Disconnect the Power Supply/Fan
Assembly power cable from the
system board.
Next Step
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/pwrrmv.html [12/10/2002 9:22:45 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Power Supply/Fan Assembly, continued
Removal
5
Disconnect the Power Supply/Fan
Assembly heatsink cable from the cable
connected to the heatsink.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/new16.html [12/10/2002 9:22:48 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Power Supply/Fan Assembly, continued
Removal
6
With the Drive Cage Assembly lying on a flat
surface, (1 ) remove one screw located on
the side of the fan, (2) slide the Power
Supply/Fan Assembly upward, and pull from
the drive cage slots.
Replacement
To replace the power supply/fan
assembly, reverse this procedure.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/new17.html [12/10/2002 9:22:50 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the I/O Board
Service
Considerations
Removal
Preparation
for
Disassembly
1
Perform preparation
procedures.
Serial Number
2
Remove the Left Easy Access
panel.
Left Easy
Access Panel
3
Remove the top access cover.
4
Remove the front door.
5
Remove the plastic subpanel.
6
Disconnect the 1394 and USB
cable on the I/O Bracket from the
connectors on the system board.
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/i-oboard.html [12/10/2002 9:23:00 AM]
Next Step
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the I/O Board, continued
Removal
7
Remove (1) two screws from the
front of the I/O Bracket and (2)
push back on the I/O Bracket to
remove from the chassis.
Replacement
To replace the I/O board,
reverse this procedure.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/i-oboard2.html [12/10/2002 9:23:03 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the LCD Display Broad
Service
Considerations
Removal
Preparation
for
Disassembly
1
Perform preparation
procedures.
Serial Number
2
Remove the Left Easy Access
Panel.
Left Easy
Access Panel
3
Remove the Top Access
cover.
Right Easy
Access Panel
4
Place the unit on right side,
remove one screw from the
top of the LCD display cage
and slide the cage to the front
of the unit to remove.
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/LCD.html [12/10/2002 9:23:11 AM]
Next Step
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the LCD Display Board, continued
Removal
5
Disconnect the LCD Display
cable from the system board.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/LCD_2.html [12/10/2002 9:23:14 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the LCD Display Board, continued
Removal
Replacement
6
Remove (1) 2 screws from LCD
Display Board and (2) push back
on the display and remove
through the hole in the bracket.
Replacement
To replace the LCD Display
Board, reverse this procedure.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/LCD2.html [12/10/2002 9:23:16 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Speaker Assembly
Service
Considerations
Removal
Preparation
for
Disassembly
1
Perform preparation
procedures.
Serial Number
2
Remove the Left Easy Access
panel.
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/speaker.html [12/10/2002 9:23:24 AM]
3
Remove the top access cover.
4
Remove the LCD display board.
5
Disconnect the Speaker Cable
from the LCD Board.
Next Step
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Speaker Assembly, continued
Removal
Replacement
6
Remove (1) screw securing
Speaker Assembly to the top of
the LCD display panel cage and
(2) slide the Speaker Assembly to
the front, and remove from the
cage.
Replacement
To replace the Speaker
Assembly, reverse this
procedure.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/speaker2.html [12/10/2002 9:23:27 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the System Board and Components - Index Page
Service
Considerations
Preparation
for
Disassembly
System board
Heatsink/Processor Assembly
RTC battery
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/bdcpnts.html [12/10/2002 9:23:34 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the System Board
Removal
1
Perform preparation procedures.
2
Remove the Left Easy Access panel.
3
Remove the Top Access cover.
4
Remove the drive cage.
5
Remove six screws securing the system
broad to the chassis and remove from
the chassis.
To replace the system board reverse the
previous procedure.
System board components index page
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/i-opnl.html [12/10/2002 9:23:37 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
System Board Components
Removing the Heatsink/Processor Assembly
Removal
1 Perform preparation procedures.
2 Remove the Left Easy Access
panel.
3 Remove the drive cage.
4 Lift up the (1) ZIF socket handle
and (2) remove the heatsink with
processor attached.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/amdk6.html [12/10/2002 9:23:44 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
System Board Components
Removing the Heatsink/Processor Assembly, continued
Removal
5 Twist the heatsink/processor
(clockwise) to remove the
processor from the heatsink.
Replacement
To replace the heatsink/processor,
reverse the previous procedure.
Return to System Board and Components
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/new13.html [12/10/2002 9:23:46 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
System Board Components
Removing the Real Time Clock Battery (RTC)
1
Perform preparation procedures.
2
Remove the Left Easy Access
panel.
3
Remove the drive cage.
4
Locate the RTC battery.
Next Step
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/battery.html [12/10/2002 9:23:49 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
System Board Components
Removing the RTC Battery
5
Pull out on the (1) socket lever and (2) lift the RTC
battery out of the socket.
Replacement
To replace the RTC battery, reverse this procedure.
WARNING: The clock/CMOS
WARNING.GIF
lithium battery may explode
(918
if mistreated. Do not abuse.
bytes) Use only replacement
batteries supplied by Compaq
Computer Corporation.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/new14.html [12/10/2002 9:23:51 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
REMOVAL & REPLACEMENT
Removing the Chassis Base
Service
Considerations
Removal
1
Perform preparation procedures.
2
Remove the Left Easy Access
Panel.
Serial Number
3
Remove the left side plastic
subpanel.
Left Easy
Access Panel
4
Remove the Right Easy Access
Panel.
Right Easy
Access Panel
5
Remove the right side plastic
subpanel.
Memory
Module
6
Remove the drive cage.
7
Remove four screws from the
base of the unit.
Preparation
for
Disassembly
Top Access
Panel
Rear Access
Panel
Fax-Modem
Board
Mass Storage
Devices
Fan/Power
Supply
Assembly
I/O Board
LCD Display
Board
Speaker
System Board
and
Components
Chassis Base
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/zprmv3.html [12/10/2002 9:24:08 AM]
Replacement
To replace the base, reverse this
procedures.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG - INDEX PAGE
NOTE:
The computer serial number should be provided to Compaq whenever
requesting information or ordering spare parts.
Mass storage devices
Keyboard
Cables
Miscellaneous parts
Standard & Optional Boards
Fax/modem
Return kit
Documentation & software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/ipc.html [12/10/2002 9:24:30 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Mass storage
devices
Cables
Standard &
Optional
Boards
Fax/modem
Keyboard
Miscellaneous
Return kits
Documentation
& software
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Mass Storage Devices
Spare Part Description
Spare Part No.
1. 1.44-MB Diskette Drive
(Models:EZ2200, EZ2207, and EZ2700)
174990-001
2. 20.0-GB Hard Drive (Models:EZ2700 and EZ2207) 168031-001
17.0-GB 5400 Hard Drive (Model:EZ2207)
168591-001
3. CD Drive 40x BAJA (Models: EZ2200 and EZ2207) 174931-001
4. CD-RW Drive 4X4X24 BLUE
(Models:EZ2200, EZ2207, and EZ2700)
173392-001
CD-RW Drive 4X4X32 BLUE
(Models:EZ2200, EZ2207, and EZ2700)
173393-001
CD-RW Drive 8X4X32 BLUE
(Models:EZ2200, EZ2207, and EZ2700)
173394-001
5. 8x DVD Drive (Model:EZ2700)
Not Available
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/msstrg.html [12/10/2002 9:24:32 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Mass storage
devices
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Miscellaneous Cables
Cables
Standard &
Optional
Boards
Spare Part Description
Spare Part No.
Miscellaneous Cable Kit (Content Includes) 176368-001
Information not available.
Fax/modem
Keyboard
Miscellaneous
Return kits
Documentation
& software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cables.html [12/10/2002 9:24:34 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Mass storage
devices
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Standard and Optional Boards
Cables
Standard &
optional
boards
Spare Part Description
Spare Part No.
1. System Board W/1394 2000 (Models:EZ2200, EZ2207, and EZ2700) 170392-102
Fax/modem
2. Celeron w/heatsink 500-MHz (Models:EZ2200 and EZ2207)
Keyboard
3.
64-MB 100-MHz Memory Module DIMM
(Models:EZ2200 and EZ2207)
179190-001
Miscellaneous
3.
128-MB 100-MHz Memory Module DIMM
(Model:EZ2700)
166966-001
Return kits
4.
Front I/O Board (DCIC) (Models:EZ2200, EZ2207, and EZ2700)
174930-001
Pentium III w/heatsink 500-MHz (Model:EZ2700)
Documentation
& software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/brds2.html [12/10/2002 9:24:36 AM]
149267-001
170073-001
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Mass storage
devices
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Fax/ Modem
Cables
Standard &
Optional
Boards
Fax/modem
Spare Part Description
Spare Part No.
56K Data/Fax Modem
(Model:EZ2200)
166386-001
Combo V90, 1MG, 10BS
56K Data/Fax Modem
(Models:EZ2207 and EZ2700)
157044-001
Keyboard
Miscellaneous
Return kits
Documentation
& software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/mdmipc.html [12/10/2002 9:24:38 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System unit
Mass storage
devices
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Keyboard
Cables
Standard &
Optional
Boards
Fax/modem
Keyboard
Miscellaneous
Return kits
Documentation
& software
Spare Part Description
Spare Part No.
USB Internet Keyboard
168102-001
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/kybds.html [12/10/2002 9:24:40 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Mass storage
devices
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Miscellaneous Parts
Cables
Spare Part
Description
Spare Part
Number
1 Mouse
168103-001
2 Access Panel
MEM/PIC
176369-001
3 Front Door Bezel
176370-001
Keyboard
4 Panel Side PCI
176372-001
Miscellaneous
5 Top Hood w/Button
Board
176371-001
6 145 Watt Power
Supply/Fan
Assembly
164174-001
Standard &
Optional
Boards
Fax/modem
Return kits
Documentation
& software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/miscpt.html [12/10/2002 9:24:44 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Mass storage
devices
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Return Kit
Cables
Standard &
Optional
Boards
Spare Part Description
Return Kit
Spare Part Number
176236-001
Fax/modem
Keyboard
Miscellaneous
Return kit
Documentation
& software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/return.html [12/10/2002 9:24:46 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
System unit
Mass storage
devices
Cables
Standard &
Optional
Boards
Fax/modem
Keyboard
Miscellaneous
Return kits
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Documentation & Software
Description
Compaq Presario Series - User's Guide
Spare Part Number
Available online at
www.compaq.com/athome/
Quick Restore CD, U.S.- Model: EZ2200 and EZ2700
162948-001
Quick Restore CD, Latin America - Model: EZ2200
162948-161
Quick Restore CD, Brazil - Model: EZ2200
162948-201
Quick Restore CD, French Canada (English) Model: EZ2207
162948-401
Quick Restore CD, French Canada (French) Model: EZ2207
162948-121
Documentation
& software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/docs.html [12/10/2002 9:24:48 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Mass storage
devices
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
ILLUSTRATED PARTS CATALOG
Cables
This section provides an illustrated parts breakdown and a reference for spare parts for the Compaq
Presario EZ2000 Series Computers.
Standard &
optional
boards
When requesting information or ordering spare parts for the Compaq Series Computers provide the
computer's serial number. The (1) serial number is located on the back of the chassis above the
voltage select switch and inside of the front door on the base directly below the Front I/O connectors.
Fax/modem
Keyboard
Miscellaneous
Return kits
Documentation
& software
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/unit.html [12/10/2002 9:24:51 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
SPECIFICATIONS - INDEX PAGE
This section provides physical, environmental, and performance specifications for Compaq
Series Personal Computers.
CD or DVD and
CD-RW drive
Diskette drive
Fax-modem
Mouse
Power
Supply/Fan
Assembly
System
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/specshp.html [12/10/2002 9:25:13 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
PRODUCT DESCRIPTION - INDEX PAGE
Model Specific Features
Digital Dashboard
CPU Controls and Lights
Right Easy Access Panel
Rear Connectors
Connector pin
assignments
Power Cord Set
Requirements
General requirements
Left Easy Access Panel
USB Keyboard Controls
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/prddesc.html [12/10/2002 9:25:31 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Models and
Features
Digital
Dashboard
CPU Controls
and Lights
Right Easy
Access Panel
Left Easy
Access Panel
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
PRODUCT DESCRIPTION
Compaq Presario EZ2000 Series Standard Configuration
Model
Processor
Hard Drive
CD/CDRW/DVD
Drive
EZ2200
Celeron/500-MHz (128)
17.0-GB
40x and
CD-RW
Presario/PC-Tel HSP56K
EZ2207
Celeron/500-MHz (128)
20.0-GB
40x and
CD-RW
Presario/Conexant V.90 HPNA
EZ2700
Pentium III/550 (256)
20.0-GB
8x DVD and
CD-RW
Presario/Conexant V.90 HPNA
USB
Keyboard
Controls
Rear CPU
Connectors
Power Cord
Set
Requirements
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/Dmdls1.html [12/10/2002 9:25:34 AM]
Modem
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Models and
Features
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
PRODUCT DESCRIPTION
Digital Dashboard
Digital
Dashboard
CPU Controls
and Lights
Right Easy
Access Panel
1 E-Mail Waiting Indicator
2 Sleep Mode Indicator
3 Internet Alive Indicator
4 PC Speaker
Left Easy
Access Panel
USB
Keyboard
Controls
Rear CPU
Connectors
Power Cord
Set
Requirements
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cpufront.html [12/10/2002 9:25:37 AM]
5 LCD Display Screen
6 Awake Indicator
7 Start/Reset Button
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Models and
Features
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
PRODUCT DESCRIPTION
CPU Controls and Lights
Digital
Dashboard
CPU Controls
and Lights
Right Easy
Access Panel
Left Easy
Access Panel
USB
Keyboard
Controls
Rear CPU
Connectors
1 DVD or CD Drive Eject Button
(DVD drive available on selected models)
2 DVD or CD Drive Tray
(DVD drive available on selected models)
3 DVD or CD Drive Manual Eject Hole
(DVD drive available on selected models)
4 DVD or CD Drive Activity Light
(DVD drive available on selected models)
5 Diskette Drive
6 Diskette Drive Activity Light
7 Cable Collector
Power Cord
Set
Requirements
8 CD-RW Drive
9 Diskette Drive Eject Button
10 USB Connectors
11 1394 Connector
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/cpucntr.html [12/10/2002 9:25:40 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Models and
Features
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
PRODUCT DESCRIPTION
Right Easy Access Panel
Digital
Dashboard
CPU Controls
and Lights
Right Easy
Access Panel
Left Easy
Access Panel
USB
Keyboard
Controls
Rear CPU
Connectors
Power Cord
Set
Requirements
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/right.html [12/10/2002 9:25:43 AM]
1 Right Easy Access Panel Release Button
2 DIMM Slots
3 EMI Shield
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
PRODUCT DESCRIPTION
Models and
Features
Left Easy Access Panel
Digital
Dashboard
CPU Controls
and Lights
Right Easy
Access Panel
Left Easy
Access Panel
USB
Keyboard
Controls
Rear CPU
Connectors
Power Cord
Set
Requirements
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/left.html [12/10/2002 9:25:46 AM]
1 Left Easy Access Panel Release Button
2 Hard Drive
3 EMI Shield
4 PCI Expansion Slots
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Models and
Features
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
PRODUCT DESCRIPTION
Compaq USB Internet Keyboard
Digital
Dashboard
Internet Button Suite and USB Connectors
CPU Controls
and Lights
Right Easy
Access Panel
Internet Button Suite
Left Easy
Access Panel
USB
Keyboard
Controls
1
Instant E-mail
2
Community
3
My Presario
4
Instant Internet
5
Instant Search
6
Entertainment Ideas
7
Retail Central
Rear CPU
Connectors
USB Connectors
1
USB Port
Power Cord
Set
Requirements
2
USB Port
USB Connectors
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/kybdcon.html [12/10/2002 9:25:49 AM]
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Models and
Features
Product Description
Troubleshooting
Illustrated Parts Catalog
Removal & Replacement
Jumper & Switch Information
Specifications
PRODUCT DESCRIPTION
Rear CPU Connectors
Digital
Dashboard
CPU Controls
and Lights
Right Easy
Access Panel
Left Easy
Access Panel
USB
Keyboard
Controls
1
USB Port (2)
2
Microphone In
3
Audio Line Out
4
1394 Connector
5
SVGA Monitor Port
6
*Network Interface Connector
7
Modem (line)
8
Audio Line In
9
Voltage Select Switch
Rear CPU
Connectors
10 AC Power Connector
Power Cord
Set
Requirements
*
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/backcpu.html [12/10/2002 9:25:55 AM]
11 Modem (phone)
IMPORTANT: Modem configuration
may vary depending on the model
selected.
Compaq.com - Compaq Presario Maintenance and Service Guide - Series
United States
December 10, 2002
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Home
Models and
Features
Product Description
Troubleshooting
Illustrated Parts
Catalog
Removal &
Replacement
Jumper & Switch
Information
Specifications
PRODUCT DESCRIPTION
Power Cord Set Requirements
Digital
Dashboard
CPU Controls
and Lights
Right Easy
Access Panel
Left Easy
Access Panel
USB
Keyboard
Controls
The power cord set (flexible cord and wall plug) received with the computer
meets the requirements for use in the country where the computer was
purchased.
Power cord sets for use in other countries must meet the requirements of
the country where you use the computer. For more information on power
cord set requirements, contact your Compaq authorized dealer, reseller, or
service provider.
General Requirements
The requirements listed below are applicable to all countries:
1 The length of the power cord set must be at least
6.00 feet (1.8 m) and a maximum of 9.75 feet (3.0
m).
Rear CPU
Connectors
2 All power cord sets must be approved by an
acceptable accredited agency responsible for
evaluation in the country where the power cord set
will be used.
Power Cord
Set
Requirements
3 The power cord set must have a minimum current
capacity of 10A and a nominal voltage rating of 125
or 250 volts AC, as required by each country's power
system.
4 The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard
Sheet C13 connector, for mating with appliance inlet
on the Switch Box.
Country-Specific Requirements
Country
Accredited Agency
United States
UL*
US/Canada
UL and CSA
* The flexible cord must be Type SJT-2 or equivalent, No. 18
AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15A, 125V) or NEMA 615P (15A, 250V) configuration.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/2200-2700/pwrcrd.html [12/10/2002 9:25:59 AM]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising