Crestron BB-1000 Manual

Crestron BB-1000 Manual
Crestron BB-1000
Back Box
Contents
Back Box: BB-1000
1
Description.................................................................................................................................................1
Installation..................................................................................................................................................2
Further Inquiries........................................................................................................................................4
Return and Warranty Policies.................................................................................................................5
Merchandise Returns / Repair Service ..................................................................................5
CRESTRON Limited Warranty .............................................................................................5
Installation Guide - DOC. 5814
Contents • i
Crestron BB-1000
Back Box
Back Box: BB-1000
Description
The back Box, BB-1000, is the optional mounting hardware that is part of the
Crestron Home total control system. The BB-1000 secures a Crestron Series 1000
Touchpanel to a wall. The mounting hardware consists of :
•
1 - metal electrical box with 4 punches.
•
1 – stud mounting bracket.
•
1 – wall mounting bracket.
•
8 – 6-32 x 3/8” socket head screws.
•
4 – 4-40 x 3/4” pan head screws.
•
1 – template.
Three views and dimensions for the metal pieces of the BB-1000 are shown below.
BB-1000 Physical Views and Dimensions
3.000 in
(7.620 cm)
5.383 in
(13.673 cm)
0.253 in
(0.643 cm)
4.503 in
(11.438 cm)
0.063 in
(0.160 cm)
4.485 in
(11.392 cm)
0.063 in
(0.160 cm)
Installation Guide - DOC. 5814
0.063 in
(0.160 cm)
7.000 in
(17.780 cm)
0.063 in
(0.160 cm)
Back Box: BB-1000 • 1
Back Box
Crestron BB-1000
Installation
Complete the following installation procedure in the order provided. The only tools
required are a drywall saw ( or equivalent) and socket screwdriver.
1.
Locate an area on the wall that is ¼” (0.635 cm) from either side of a
stud.
2.
Fasten the supplied template to the wall; verify that the cutout is level.
3.
Cut out the rectangular area illustrated on the template.
4.
Remove the template and rectangular drywall cutout.
5.
Use template and rectangular drywall cutout and place mounting
bracket alignment marks on wall, as shown below.
Mounting Bracket Alignment Marks
MOUNTING
BRACKET
ALIGNMENT
MARK
6.
2 • Back Box: BB-1000
Position stud mounting bracket to front edge of stud (closest to
drywall) and align corners of the raised part of the bracket with the
mounting bracket alignment marks on the wall. Refer to the illustration
on the next page.
Installation Guide - DOC. 5814
Crestron BB-1000
Back Box
Aligning Mounting Bracket Alignment Mark with Corner of Stud Bracket
CORNER
OF STUD
MOUNTING
BRACKET
MOUNTING
BRACKET
ALIGNMENT
MARK
7.
Using four screws, not supplied, secure stud mounting bracket to stud,
as shown below.
Secure Stud Mounting Bracket
Installation Guide - DOC. 5814
Back Box: BB-1000 • 3
Back Box
Crestron BB-1000
8.
Use four socket head screws, supplied, to attach wall mounting bracket
to electrical box, as shown below.
Attach Wall Mounting Bracket to Electrical Box
9.
Position bracket-electrical box assembly into wall opening and secure
to stud mounting bracket with four socket head screws, supplied.
10. If touchpanel is available, secure touchpanel to BB-1000 using four pan
head screws, supplied. If touchpanel is not available, insert screws into
holes for future use.
Further Inquiries
If after reviewing this Installation Guide for the BB-1000, you cannot locate specific
information or have questions, please take advantage of Crestron's award winning
technical support team by calling:
•
In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400.
•
In Europe, call Crestron International at +32-15-50-99-50.
•
In Asia, call Crestron Asia at +852-2341-2016.
•
In Latin America, call Crestron Latin America at +525-574-15-90.
For local support from exclusive Crestron factory-trained personnel call:
4 • Back Box: BB-1000
•
In Australia, call Soundcorp at +613-9488-1555.
•
In New Zealand, call Amber Technologies at +649-410-8382.
Installation Guide - DOC. 5814
Crestron BB-1000
Back Box
Return and Warranty Policies
Merchandise Returns / Repair Service
1.
No merchandise may be returned for credit, exchange, or service
without prior authorization from CRESTRON. To obtain warranty
service for CRESTRON products, contact the factory and request an
RMA (Return Merchandise Authorization) number. Enclose a note
specifying the nature of the problem, name and phone number of
contact person, RMA number, and return address.
2.
Products may be returned for credit, exchange, or service with a
CRESTRON Return Merchandise Authorization (RMA) number.
Authorized returns must be shipped freight prepaid to CRESTRON,
Cresskill, N.J., or its authorized subsidiaries, with RMA number clearly
marked on the outside of all cartons. Shipments arriving freight collect
or without an RMA number shall be subject to refusal. CRESTRON
reserves the right in its sole and absolute discretion to charge a 15%
restocking fee, plus shipping costs, on any products returned with an
RMA.
3.
Return freight charges following repair of items under warranty shall
be paid by CRESTRON, shipping by standard ground carrier. In the
event repairs are found to be non-warranty, return freight costs shall be
paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its Cresnet products, denoted by a
"CN" prefix model number, to be free from manufacturing defects in materials and
workmanship for a period of three (3) years from the date of shipment to purchaser.
Disk drives and any other moving or rotating mechanical parts are covered for a
period of one (1) year. CRESTRON warrants all its other products for a period of
one year from the defects mentioned above, excluding touchscreen display
components which are covered for 90 days. Incandescent lamps are completely
excluded from Crestron's Limited Warranty. CRESTRON shall, at its option, repair
or replace any product found defective without charge for parts or labor. Repaired or
replaced equipment and parts supplied under this warranty shall be covered only by
the unexpired portion of the warranty.
CRESTRON shall not be liable to honor warranty terms if the product has been used
in any application other than that for which it was intended, or if it has been
subjected to misuse, accidental damage, modification, or improper installation
procedures. Furthermore, this warranty does not cover any product that has had the
serial number altered, defaced, or removed.
This warranty shall be the sole and exclusive remedy to the purchaser. In no event
shall CRESTRON be liable for incidental or consequential damages of any kind
(property or economic damages inclusive) arising from the sale or use of this
equipment. CRESTRON makes no other warranties nor authorizes any other party to
offer any warranty, expressed or implied, including warranties of merchantability for
this product. This warranty statement supersedes all previous warranties.
Trademark Information
All brand names, product names, and trademarks are the sole property of their respective owners.
Windows is a registered trademark of Microsoft Corporation. Windows95, Windows98 and WindowsNT
are trademarks of Microsoft Corporation.
Installation Guide - DOC. 5814
Back Box: BB-1000 • 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement