Milwaukee | 5337-21 | Specifications | Milwaukee 5337-21 Specifications

WORKS WELL WITH:
• Bosch® 1135K
• Milwaukee® 5337-21
• Makita® HM1317CB/HM1307CB
• Hitachi® H65SD2
• Dewalt® D25960K
• Hilti® TE1000/TE1500
Shown with
Makita® Tool
5 Adjustable Positions
Tile Stripper/Hammer
(sold separately)
REV.1
PEARL ABRASIVE CO. • EASY HAMMER ® TROLLEY
EASY HAMMER® MANUAL
TABLE OF CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Key Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRODUCT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Stickers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Product Description and Specifications . . . . . . . . . . . . . . . . . .5
INSTRUCTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 1 - Fitting A Jack Hammer . . . . . . . . . . . . . . . . . . . . . . 6-7
STEP 2 - Using the Hammer Trolley . . . . . . . . . . . . . . . . . . . . 8
STEP 3 - Servicing the Hammer Trolley . . . . . . . . . . . . . . . . . 8
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Eazy Hammer® Trolley - Hazard Assessment . . . . . . . . . . . . 9
Block Set Part Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Servicing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Jack Hammer Manual (When Purchased) . . . . . . . . . . . . . . 11
INTRODUCTION
This manual is designed to provide the user with
the information required to operate and maintain
the Easy Hammer® Trolley correctly and safely.
CAREFULLY READ AND FOLLOW ALL
INSTRUCTIONS PROVIDED BY THE
EASY HAMMER® MANUFACTURER.
KEY TERMS
1. READ CAREFULLY:
Refers to important information that
should be paid careful attention.
2. CAUTION:
Indicates a situation that may cause
injury or damage to the machine if the
user does not follow the instructions.
3. WARNING:
Indicates a situation that may cause
injury or death if the user does not
follow the instructions correctly.
4. DANGER:
Indicates a situation that will cause
injury or death if the user does not
follow the instructions as written.
5. PROHIBITED:
Identifies actions that should never be
carried out by anyone interacting with
the machine.
DISCLAIMER
PEARL®, and its affiliates, takes no
responsibility for any damage, injury or
death resulting from the incorrect or
unsafe use of this machine. Use of this
machine should be undertaken by competent persons only. It is the operators’
responsibility to ensure that the following
safety procedures are followed.
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
–3–
PRODUCT
INFORMATION
Throughout this document there are several
safety warnings. The user should read
through this complete document before
using the Easy Hammer® Trolley.
WWW.PEARLABRASIVE.COM • 800-969-5561
SAFETY INFORMATION
1. READ CAREFULLY:
Ensure you read all information
contained in this manual before
using the Easy Hammer® Trolley.
SAFETY OPERATING INSTRUCTIONS
2. READ CAREFULLY:
Ensure you read the manual and
safety instructions for the Jack
Hammer and other components
that are part of this unit. See
Appendix for more information.
• ENSURE HAMMER IS SWITCHED OFF BEFORE PLUGGING
IN OR DISCONNECTING FROM MAIN POWER SUPPLY.
• USE A DEDICATED MAIN POWER SUPPLY WITH EXTENSION
LEAD NOT EXCEEDING 10M.
• ALWAYS WEAR APPROPRIATE PERSONAL PROTECTIVE
EQUIPMENT.
• USE CAUTION WHEN CHANGING ATTACHMENTS.
• TAKE REGULAR BREAKS TO AVOID PERSONAL INJURY,
STRESS, STRAIN OR FATIGUE.
3. DANGER:
Always wear the recommended
personal protective equipment.
4. PROHIBITED:
Never expose the machine to
moisture or rain.
28kg
10m
Heavy
Lead Length
Read Manual
Hands Clear
Wear Eye
Protection
Wear Breathing
Protection
Wear Hearing
Protection
Keep
Grounded
Large Label
There is a safety and information panel
provided on the front of the Easy Hammer®
Trolley to alert the user of potential safety
risks/hazards. Please read and adhere to
all instructions on the Unit.
SAFETY STICKERS
1. PROHIBITED:
It is forbidden to remove any safety
or instructional stickers or panels
from the Easy Hammer® Trolley.
2. READ CAREFULLY:
Read all safety and instructional
stickers displayed on each compo
nent of the Easy Hammer® Trolley.
–4–
WWW.PEARLABRASIVE.COM
800-969-5561
Medium Label
WWW.PEARLABRASIVE.COM
800-969-5561
SERIAL
NUMBER
Small Label
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
WARRANTY
1. PEARL® provides a Limited One Year Warranty that
applies to Easy Hammer® Trolley only (this excludes the
Jack Hammer and any othe rattachments and
consumables).
2. Warranty does not cover wear and tear, breakage, misuse
or theft. Warranty coverage is at the manufacturer’s
discretion.
3. Any unauthorized repair or part replacement will void
warranty. Refer to manufacturer for all repairs.
4. Regular service must be carried out by competent persons
only; failure to comply will void warranty.
5. Jack Hammer (where purchased) is to be covered by
original manufacturer. See appendix.
6. Warranty does not cover consumables. Warranty does not
cover attachments.
PRODUCT DESCRIPTION AND SPECIFICATIONS
The versatile Easy Hammer® packs a punch, saving you
a lot of hard work and effort. Let the Easy Hammer® take
the workload off your back!
No more struggling or bending trying to handle heavy
hammers, the Easy Hammer® takes the pain out of
demolition and renovation.
The Easy Hammer® enables your demolition hammer to
lift most types of linoleum and tile, break rocks and blocks,
crack concrete and sandstone, all with a minimum of effort.
With a wide range of angles the Easy Hammer® adapts to
any situation with maximum leverage.
FEATURES
• Durable zinc-coated frame
• Angle adjustment – with huge angle range
• Choice of popular brand hammers; will suit
most hammers
• Anti-vibration ergonomic design
• Large wheels
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
TABLE 2: #PA01HT Product Specifications
HEIGHT WHEN
RAISED
1100mm / 43.3”
HEIGHT WHEN
LOWERED
600mm / 23.6”
OVERALL
WIDTH
510mm / 20.1”
OVERALL
LENGTH
1100mm / 43.3”
ANGLE OF
ADJUSTMENT
73˚ (93˚ closed)
(20˚ open)
WEIGHT
(WITHOUT
JACKHAMMER)
28kg / 61.8lb
–5–
INSTRUCTIONS
FOR USE
WARNING!
DO NOT OPERATE THE EASY HAMMER WITHOUT WEARING
THE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT AND
ASSESSING THE SURROUNDING AREA FOR HAZARDS.
STEP 1 - FITTING A JACK HAMMER
Tools Required:
• 17mm / 5/8” socket
• 19mm / 3/4” socket
• Shifter
• Pliers
• Phillips head screwdriver
Instructions:
1. You should have the parts pictured below:
2. Attach the handle to
the frame with the two
mounting bolts provided.
Block Set
Suited to
Jackhammer
Brand
(Jackhammer sold separately)
3. NOTE – for Block Set details refer
to APPENDIX B.
Lower trolley to its lowest position and
support the end to hold the frame level,
then place the base blocks on the frame.
Place the jackhammer on top of the base
blocks. Ensure the attachment lock on the
jackhammer is facing out, as shown in the
picture below:
–6–
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
4. Place top blocks and the cover plate on top of the
jackhammer and tighten the supplied bolts until
they are snug.
5. Mount the jackhammer shank; see
jackhammer user manual for details.
Brake Lever Adjustment:
Adjustment
Screw
Retaining
Screw
Instructions:
1. Ensure cable is not kinked anywhere along its length.
2. Tighten retaining screw with pliers.
3. Tighten adjustment screw to remove slack from the
cable. Note that some slack in the mechanism is normal.
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
–7–
INSTRUCTIONS
FOR USE (Cont.)
WARNING!
ENSURE THE MACHINE IS
SWITCHED OFF BEFORE
PLUGGING IN.
CAUTION!
ENSURE MOIL IS CORRECTLY
INSERTED AND LOCKED
IN POSITION BEFORE USE.
STEP 2 - USING THE HAMMER TROLLEY
Instructions:
1. Ensure Hammer is secure in clamping
mechanism and cannot rotate.
2. Position and angle before commencing
work.
To change angle - lift handles to take
weight off lock mechanism then pull the
brake lever to disengage the lock
mechanism. Lift or lower the height of the
handles to achieve the desired angle of
jackhammer then release brake lever to
reengage the lock mechanism.
3. Never allow Hammer or moil to overheat.
4. Switch on with trigger.
5. Lock into position with trigger lock.
STEP 3 - SERVICING THE HAMMER
TROLLEY
Every Use:
1. Inspect frame for damage
2. Ensure bolts are secure
Every 6 Months:
1. Adjust brake lever to eliminate free-play
• See page 7 for details
2. Lubricate brake lever cable
• Drip oil from the top of the cable so it
runs through the cable housing
• Use light weight oil; grease or heavy oil
will clog the cable housings
3. Grease the pivot axle
• Use a grease gun and apply grease until
excess starts to leak out. See picture
below for location of grease nipple.
6. Refer to Hammer Instruction Manual for
more detail on operation and service.
WARNING!
–8–
ALWAYS SWITCH OFF
MACHINE BEFORE
UNPLUGGING.
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
Pearl Abrasive Co.
APPENDIX A - HAZARD ASSESSMENT
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
–9–
– 10 –
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
WWW.PEARLABRASIVE.COM
800-969-5561
APPENDIX B
EASY HAMMER® BLOCK INSTRUCTIONS
APPENDIX C - SALES AND REPAIRS
For sales and spare parts please refer to your local distributor below.
CUSTOMER SERVICE
AFTER SALE SERVICE
All customer service (technical questions, re-order of parts, etc.) will be provided by our company. All spare parts
for after sales service will be stocked and shipped from our warehouse. If requested, we may arrange for our sales
representatives to hold a training class for product knowledge at dealer’s location.
HOW TO ORDER PARTS
Please have the following information ready before calling:
• Serial Number
• Model Number
• When purchased and where
• Part Description
All parts listed may be ordered from your Local warehouses. If the part is not stocked locally, call our Corporate office
and ask for our Customer Service Department. For Technical Support call 1-800-969-5561. There is a $25.00
minimum order.
Return Policy: Return goods for credit or exchange on the basis of the following terms: (1) They must be current
products; (2) Items returned for replacement or refund should be in original cartons and must be accompanied by a
packing slip with the following information: Returned Goods Authorization (RGA) number obtainable from Customer
Service Department • List of items returned • Reason(s) for return(s) • Copy of original invoice(s); (3) Freight charges
must be assumed by sender; (4) Returning goods are subject to a 15% handling charge to cover our cost of repacking and restocking. All Prices are subject to change without notice.
Disclaimer: Pearl Abrasive Co. reserves the right to make changes or improvements on its products without
incurring an additional obligation including any obligation to make corresponding changes or improvements to
products previously manufactured or sold. Pearl reserves the right to discontinue products at any time without
notice.
All illustrations displayed in this manual are the property of Pearl Abrasive Co. and shall not be duplicated or
reproduced without the express written consent of Pearl Abrasive Co.
APPENDIX D - JACK HAMMER MANUAL
Jack Hammer manual will be provided with Jackhammer purchase.
P EAR L ABR AS IVE CO. - EASY HAM M E R® MAN UAL
– 11 –
PEARL ABRASIVE CO.
ACCEPT NO IMITATIONS
CORPORATE OFFICE: SO. CALIFORNIA • USA
6832 E. SLAUSON AVENUE, COMMERCE, CA 90040-0031
562-927-5561 • FAX 562-928-3857
800-969-5561
WWW.PEARLABRASIVE.COM
GEORGIA • USA
4963 SOUTH ROYAL ATLANTA DR.
TUCKER, GA 30084-3006
©2013 PEARL ABRASIVE CO., COMMERCE CA 90040
EHMANV1
Download PDF