CAB | A8+ | Technical data | CAB A8+ Technical data

CAB A8+ Technical data
Edition 9.4
Label printers A+ and X series
Made in Germany
Contents
Industrial label printers .
.
.
.
.
.
.
.
3
.
.
.
.
.
.
.
.
Label printers A+ series - overview of types .
.
.
.
.
.
.
.
4-5
Label printers with centered material positioning .
.
.
.
.
.
6-7
Label printers with centered material positioning and drawing roller. 8-9
Label printers for two-color printing. .
.
.
.
.
.
.
.
.
10-11
Label printers - technical data. .
.
.
.
.
.
.
.
.
12-13
Accessories - overview .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 14
.
Accessories - special equipment, interfaces, connecting cables . . 15
Accessories - cutting labels, perforating labels, stacking labels .
. 16
Accessories - rewinding labels, unwinding labels .
.
.
.
.
.
. 17
Accessories - dispensing labels .
.
.
.
.
. 18-19
.
.
.
.
.
.
Applicator A1000. . . . . . . . . . . . . . . . . . 20
Accessories - applicator A1000. . . . . . . . . . . . . 21
Applicator A3200. . . . . . . . . . . . . . . . . . 22
All information on scopes of delivery,
design and technical specifications
correspond to the date of the
printing. Subject to change.
For current data see website
www.cab.de/en/labelprinter.
Accessories - mounting equipment . . . . . . . . . . .
23
Label software cablabel S3 . .
24
.
.
.
.
.
.
.
.
.
.
.
.
Integration. . . . . . . . . . . . . . . . . . . . 25
Stand-alone operation, easy maintenance . . . . . . . . . 26
Service, training . . . . . . . . . . . . . . . . . . 27
Label printers - product range. .
.
.
.
.
.
.
.
.
.
.
.
28
Accessories - product range. . . . . . . . . . . . . 29-30
Or scan this QR code
with your smartphone.
cab product range at a glance . .
.
.
.
.
.
.
.
.
.
.
.
31
Industrial label printers
Professional industrial cab label printers are
used in a wide variety of applications. Their
development is first and foremost focused
on simple and convenient operation coupled
with high reliability.
Printing units and housings are made of
high-quality materials and are perfectly
matched in terms of shape and function.
Extensive peripherals and software enable
customized solutions – at any time.
Regardless of whether the A+ or X printer
series is operated as a stand-alone solution,
a PC application or in a network, it is always
up to the mark. The high-speed processor
ensures both fast job processing and
immediate label output.
Sample applications:
PCB labels
If there is only little space available –
smallest label size 4x4 mm
Type plates
Pin sharp 600 dpi fonts, graphics and
barcodes
Cardboard box and pallet labels
Labels up to standard A4 format
3
Label printers A+ series - overview of types
The sleek one
For small labels with high printing accuracy
A2+
1.1 Label printer
Printable resolution
dpi
Print width
up to mm
Print speed
up to mm/s
300
54.2
150
600
57
100
The all-purpose one
Top-selling industrial device with high printing accuracy.
Extensive range of accessories included. The A4.3+ model
preferably for thermal direct printing.
A4+
A4.3+
1.2 Label printer
Printable resolutiondpi 203 300 600 203 300
Print width up to mm 104 105.6 105.6 104 108.4
Print speed up to
mm/s 250 250 100 200 150
The wide one
Ideal for Odette and UCC labels
1.3 Label printer
Printable resolution
dpi
Print width
up to mm
Print speed
up to mm/s
A6+
203
168
200
300
162.6
200
The extra wide one
For pallet and barrel labels
1.4 Label printer
Printable resolution
dpi
Print width
up to mm
Print speed
up to mm/s
Basic version
For printing on labels
and continuous materials.
The material is torn off at
the jagged tear-off edge.
Optionally, it may be cut
or rewound externally.
4
A8+
300
216
150
Dispensing version
For printing and dispensing labels. The label is
removed from the liner
during the printing process. It can be removed
manually, by applicator
or robot.
Common details
1
2
3
6
7
8
4
5
Pictured:
Label printer A4+
with dispensing function
1
Wide graphic display
White backlight for optimum readability.
2
Ribbon holder
Three-part tightening axles enable a quick and easy
exchange of ribbons.
3
Simple adjustment
The print head is pressed down by two toggles. One is
mounted to the left label margin, the other is pushed to
the right label margin.
4
Peripheral connection
All add-on modules are easy to connect. All peripheral
devices are plugged in the printer using two pins and are
fixed in place with a screw.
5
Solid metal housing
Die-cast aluminum. All components are mounted on it.
Compact cover
The two-part cover made of impact-resistant ABS plastic
folds up when opened.
6
Roll holder
Available for core diameters starting 38 mm (76 mm
adapters for improved label winding are provided). The
spring-mounted margin stop ensures constant tension
during feeding, thus ensuring high printing accuracy.
7
Internal rewinder
The rewinder with a three-part tightening axle ensures
easy rewinding and removing of labels or liners with or
without paper core.
8
Peel-off function
The label is removed from its liner via peel-off plate.
High printing and dispensing accuracy can be achieved
via powered rewind assist and pinch rollers.
1.11 Metal cover
On request, label printers A4+ and A6+ are available
with metal cover (standard with the A8+).
5
Label printers with centered material positioning
For single-sided printing
As with the “classic” A+ series all materials can be marked.
Especially very small and slim labels and continuous material on
rolls or reel. No adjustment of the print head for different widths of
material. Operation and control are compatible with the A+ series.
1.5 Label printer
Printable resolution
dpi
Print width
up to mm
Print speed
up to mm/s
A4+M
300
105.6
125
600
105.6
100
For double-sided printing
For simultaneous front and back printing, e.g. continuous
materials, cardboard labels and ready-for-use heat shrink tubes.
No adjustment of the print head for different widths of material.
Operation and control are compatible with the A+ series.
1.6 Label printer
Printable resolution
dpi
Print width
up to mm
Print speed
up to mm/s
XD4
300
105.6
125
Accessories
Cutter
Used to cut paper labels, self-adhesive
labels, cardboard, textile or synthetic
materials as well as heat shrink tubes.
Perforation cutter
Enables the perforation of the material
for later manual separation.
6
Stacker with cutter
Printed materials are cut and stacked.
The print job is stopped as soon as the
maximum stack height is reached. Even
stiff or curved materials may be processed.
We recommend to have your material
tested at our facilities.
Print rollers
for small and thin materials
Outside the material width the printhead
rubs against the print rollers. By using
small print rollers feeding errors and wear
on print head and print roller due to
rubbing are avoided. Three different
standard widths are available from stock.
Common details
2
7
1
Pictured:
Label printer A4+M
with centered material positioning
3
2
4
1
5
6
Pictured:
Label printer XD4
for double-sided printing
1
Wide graphic display
White backlight for optimum readability.
2
Ribbon holder
Simple, centered insertion of the ribbon with three-part
tightening axles. Imprinted rule simplifies ribbon positioning.
3
No print head adjustment
The print head is pressed down by two toggles. Due to
centered material positioning there is no need to do print
head adjustments and settings.
4
Material positioning
High printing accuracy as the material is located directly
behind the print roller. Width adjustment with a single knob.
5
Peripheral connection
Add-on modules such as cutter, perforation cutter
and stacker are easy to connect.
6
Solid metal housing
Die-cast aluminum. All components are mounted on it.
7
Roll holder
Available for core diameters starting 38 mm (76 mm
adapters for improved label winding are provided). The
material is automatically centered. The spring-mounted
margin stop ensures constant tension during feeding,
thus ensuring high printing accuracy.
7
Label printers with centered material positioning
and drawing roller
For single-sided printing
Printable materials accordant to A+M. The additional drive roller
next to the print head enables the material to be separated from
the ribbon and improves printing accuracy. Operation and control
are compatible with the A+ series.
1.7 Label printer
Printable resolution
dpi
Print width up to mm
Print speed
up to mm/s
A4+T
300
105.6
125
600
105.6
100
For double-sided printing
For simultaneous front and back printing, e.g. continuous
materials, cardboard and ready-for-use heat shrink tubes. The
additional drive roller next to the print head enables the material
to be separated from the ribbon and improves printing accuracy.
Operation and control are compatible with the A+ series.
1.8 Label printer
Printable resolution dpi
Print width up to mm
Print speed
up to mm/s
XD4T
300
105.6
125
Accessories
Cutter
Used to cut paper labels, self-adhesive
labels, cardboard, textile or synthetic
materials as well as heat shrink tubes.
Perforation cutter
Enables the perforation of the material
for later manual separation.
8
Stacker with cutter
Printed materials are cut and stacked.
The print job is stopped as soon as the
maximum stack height is reached. Even
stiff or curved materials may be processed.
We recommend to have your material
tested at our facilities.
Print rollers
for small and thin materials
Outside the material width the printhead
rubs against the print rollers. By using
small print rollers feeding errors and wear
on print head and print roller due to
rubbing are avoided. Three different
standard widths are available from stock.
Common details
7
2
1
Pictured:
Label printer A4+T
with centered material positioning
3
2
4
1
5
6
Pictured:
Label printer XD4T
for double-sided printing
1
Wide graphic display
White backlight for optimum readability.
2
Ribbon holder
Simple, centered insertion of the ribbon with three-part
tightening axles. Imprinted rule simplifies ribbon positioning.
3
No print head adjustment
The print head is pressed down by two toggles. Due to
centered material positioning there is no need to do print
head adjustments and settings.
4
Material positioning
High printing accuracy as the material positioning is located
directly behind the print roller. Width adjustment with a single
knob. In case of the A4+T and XD4T the additional drive roller
enables the material to be separated from the ribbon.
5
Peripheral connection
Add-on modules such as cutter, perforation cutter
and stacker are easy to connect.
6
Solid metal housing
Die-cast aluminum. All components are mounted on it.
7
Roll holder
Available for core diameters starting 38 mm (76 mm
adapters for improved label winding are provided). The
material is automatically centered. The spring-mounted
margin stop ensures constant tension during feeding,
thus ensuring high printing accuracy.
9
Label printers for two-color printing
Two in-line arranged thermal transfer print units for
simultaneous two-color printing in one label. With ribbon
saver at one print unit:
• The XC series meets the conditions for the classification
and labeling inventory according to GHS.
• For large label rolls up to 300 mm diameter
• The two print units including ribbon holder, operation panel
and electronics are adopted from the proven A+ series.
1.9 Label printer
Printable resolution Print width Print speed dpi
up to mm
up to mm/s
XC4
300
105.6
125
1.10 Label printer
Printable resolution Print width Print speed dpi
up to mm
up to mm/s
XC6
300
162.6
125
We are glad to assist you in the selection of proper ribbons.
Accessories
Cutter
Used to cut paper labels, self-adhesive
labels, cardboard, textile or synthetic
materials as well as heat shrink tubes.
Perforation cutter
For XC4 printers only. Enables the perforation
of the material for later manual separation.
10
Stacker with cutter
For XC4 printers only. Printed materials
are cut and stacked. The print job is
stopped as soon as the maximum stack
height is reached. Even stiff or curved
materials may be processed. We recommend to have your material tested
at our facilities.
Common details
1
2
6
3
2
1
4
7
8
5
Pictured:
Label printer XC6
for two-color printing
1
Wide graphic display
White backlight for optimum readability.
5
Solid metal housing
Die-cast aluminum. All components are mounted on it.
2
Ribbon holder
Simple, centered insertion of the ribbon with
three-part tightening axles.
6
3
Simple adjustment
The print head is pressed down by toggles. One is
mounted to the left label margin, the other is pushed to
the right label margin.
Roll holder
For labels up to 300 mm diameter. Swing lever and
integrated brake make sure that the labels are unwound
with constant tension.
7
Ribbon saver for print head 1
The ribbon saver is used for labels to be partially printed.
The print head is lifted within the unprinted area and the
ribbon stopped during label feeding.
8
Fanfold guide
Fanfolded labels are positioned behind the print unit. Guide
and additional brake ensure reliable feeding to the print unit.
4
Peripheral connection
All add-on modules are easy to connect. All peripheral
devices are plugged in the printer using two pins and are
fixed in place with a screw.
11
Label printers - technical data
 Standard  Optionally
1.1
Label printer
A2+
Print head


Printing method thermal transfer

thermal direct
–
Printable resolution dpi 300 600
Print speed up to mm/s 150
100
Print width up to mm 54.2
57
Material
Labels or continuous materials

on rolls or fanfold
Labels on reel
–
Material thickness mm/weight g/m2
Width labels2) mm
4-63
liner mm
24-67
continuous material mm
24-67
contin. heat shrink tubemm
10-67
Label without back-feed from mm
4
height2) when dispensingfrom mm
12
up to mm 5,000 2,000
Media roll outer diam. up to mm
205
core diameter
mm
38-100
winding
Ribbon
Ink side
Roll diameter up to mm
80
Core diameter mm
25
Variable length up to m
500
up to mm
57
Width3) Internal rewinder (only with peel-off devices)
Outer diameter up to mm
142
Core diameter mm
38.1
Label winding
Outer only
Dimensions and weights
Height
mm
274
Depth mm
446
Width mm
190
Weight kg
8.5
Label sensor
Gap sensor
Reflective sensor from bottom/opt. top
Distance to locating edge mm
5-26
center to the leftmm –
Electronics
Processor 32 bit clock rate MHz
Main storage (RAM) MB
IFFS printer memory
MB Flash
Plug-in CompactFlash Type I
WLAN card
Battery buffer for real-time clock
Acoustic error signal
Interfaces
Centronics according to IEEE 1284
RS232 C
USB 2.0 hi-speed slave for PC
Ethernet 10/100 Base T, LPD-, RawIP-,
FTP-Printing, DHCP, HTTP, SMTP,
SNMP, TIME, Zeroconf, mDNS, SOAP
RS422/RS485
Peripheral connection
WLAN 802.11b/g, WEP/WPA-PSK (TKIP) 2xUSB hosts for external operation panel,
keyboard, scanner, service key, USB stick Operating data
Power supply
Power consumption W
Temperature/humidity operation
storage
transport
Approvals
1)
3)
12
1.2
A4+


203
250
104


1.3
A6+

–
300 600
250
100
105.6 105.6





–
0.05-0.8/60-300
46-176
50-180
50-180
20-116
24-120
24-120
–
25-85
4
6
12
25
5,000 4,000 1,000 4,000 3,000
205
205
38-100
38-100





1.6
XD4

1.7
A4+T


1.8
1.9
XD4T XC4


1.10
XC6






1)
1)
–




–
–
46-220
50-235
50-235
4-106
10-110
4-110
–
4-85
10
5
–
–
2,000 4,000 1,000
205
205
38-100
38-100
Outer or inner
Outer or inner
72
80
25
25
360
500
220
114
80
25
500
114
80
25
500
165
142
38.1
Outer only
142
38.1
Outer only
–
–
–
274
446
242
9
274
446
302
13
274
446
352
15
5-53
–
1.5
A4+M
–
–
–
–
–
–
–
203 300 300 300 600 300
300 600 300 300
300
200
200
150
125
100
125
125
100
125
125
125
168 162.6 216 105.6 105.6 105.6 105.6 105.6 105.6 105.6 162.6
Paper, cardboard, textile, plastics

–
1.4
A8+
0.05-0.2/60-180
4-106
10-110 20-116 46 -176
10-110
10-110 24-120 50-180
–
–
4-110
4-110
10-110
10-110
4-110
–
–
–
–
4-85
20
5
20
20
20
–
–
–
–
–
2,000 4,000 1,000 2,000 2,000 1,500
300
205
300 300
300
38-100
38-100
38-100 76
76
72
25
360
114
80
25
500
114
72
25
360
114
72
25
360
114
72
25
360
165
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
274
446
242
9
395
554
248
21
274
446
242
9
395
554
248
21
395
554
248
22
395
554
358
24
For leading edge or punch marks and end of material
For print marks
5-53
5-53
–
–
–
–
–
0-53
0-53
0-53
–
0-53
5-53
–
5-53
–
266
64
8




–
–













–
100-240 VAC ~ 50/60 Hz, PFC
100-300 depending on type of printer
5-40 °C/10-85 % not condensing
0-60 °C/20-80 % not condensing
–25-60 °C/20-80 % not condensing
CE, FCC class A, CB, CCC, UL
Continuous materials on rolls only after being tested. 2) Limitations may apply to small labels, thin materials or strong adhesives. These applications need to be tested and approved.
Ribbon according to label width in order to avoid folding.
 Standard Operation panel
Buttons/LED displays Pause, feed, cancel, menu, enter, 4 x cursor
LCD graphic display Width 60 mm, height 40 mm, 4 lines text,
approx. 20 characters per line
Settings
Digital or analog clock
Time
System settings
Date
Print parameters
Interfaces
Language settings
Security
On display
Data reception
Clock
WLAN field intensity
Date sheet
Ethernet status
abc Debug
Used memory
Input buffer
Temperature print head
Remaining ribbon
Memory card access
Monitoring
Stop print job
When end of ribbon
When end of labels
When print head open
When not reached final position of cutter
Testing functions
System diagnosis When switched on, including print head testing
Short status,
Fonts list, devices list, WLAN status,
status print
label profile, test grid, monitor mode,
PPP status
Status reports
Printout on device settings, e.g. print length counter,
runtime counter, etc.
Request of status via software command,
status messages on display, e.g. network error
- no link, barcode error, etc.
Fonts
Font types
5 bitmap fonts, incl. OCR-A, OCR-B and 3 vector
fonts Swiss 721, Swiss 721 bold and Monospace
821 internally available, TrueType fonts loadable.
Optionally: Chinese (simplified), Thai
Character sets
Windows 1250 to 1257, DOS 437, 737, 775, 850,
852, 857, 862, 864, 866, 869, EBC DIC 500, ISO
8859-1 to -10 and -13 to -16, WinOEM 720, UTF-8,
Macintosh Roman, DEC MCS, K0I8-R.
All Western and Eastern European characters,
Latin, Cyrillic, Greek, Hebrew and Arabic are
supported. Optionally: Chinese (simplified), Thai
Bitmap fonts
Size of width and height 1-3 mm
Zoom factors 2-10
Orientation 0°, 90°, 180°, 270°
Vector/TrueType
Size of width and height 0.9-128 mm
fonts
Variable zoom, orientation 360° in steps of 1°
Font formats
Bold, italic, underlined, outline, inverse
- depending on font types
Font width
Variable
Graphics
Graphic elements
Graphic formats
Barcodes
Linear barcodes
2D codes
Software
Programming
Monitoring/
administration
Label software
Windows drivers
certified
Mac drivers *
Linux drivers *
Stand-alone
operation
*only with A+ series
 Optionally
Lines, arrows, boxes, circles, ellipses, filled and
filled with fading
PCX, IMG, BMP, TIF, MAC, GIF, PNG
Code 39, Code 93
Interleaved 2/5
Code 39 Full ASCII
Ident and lead code of
Code 128 A, B, C
Deutsche Post AG
EAN 8, 13
Codabar
EAN/UCC 128
JAN 8, 13
EAN/UPC Appendix 2
MSI
EAN/UPC Appendix 5
Plessey
FIMPostnet
HIBC
RSS 14
UPC A, E, E0
Aztec, Codablock F, Data Matrix, PDF 417, Micro
PDF 417, UPS Maxicode, QR code, RSS 14
truncated, limited, stacked and stacked
omnidirectional, EAN Datamatrix, GS1 Data Bar
All codes are variable in height, module width and
ratio. Orientation 0°, 90°, 180°, 270°.
Optionally with check digit, printed characters and
start/stop code depending on type of code
J-Script direct programming
abc Basic Compiler
Database Connector
Printer monitoring
Administration Network Manager
cablabel S3 Lite
cablabel S3 Viewer
cablabel S3 Pro
32/64 bit for
Windows XP
Server 2003
Windows Vista
Server 2008
Windows 7
Server 2008 R2
Windows 8
Server 2012
Windows 8.1
Server 2012 R2
OS X printer drivers starting version 10.6
32/64 bit starting CUPS 1.2












13
Accessories - overview

Typical  Possible  Standard  Optionally
Extra equipment
2.1 Metal cover
2.2 Print rollers DR4-M25, -M50, -M80
2.3 Reflective label sensor - from top
2.4 Adapter 100 mm diameter
2.5 Memory card
2.6 Standard USB keyboard
2.7 External operation panel
2.8 Pause adapter PS7 - print job interruption
2.9 Tester CC for linear and 2D barcodes
Interfaces
3.1 Centronics according to IEEE 1284
3.2 RS422/RS485
3.3 Label selection – I/O box
3.4 WLAN 802.11b/g
Connecting cables
4.1 Connecting cable RS232 C, 9/9-pin, length 3 m
4.2 Patch cable CAT 5e, length 3 m, gray
Cutting labels, perforating labels, stacking labels
5.1 Cutter CU
5.2 Cutter tray
5.3 Perforation cutter PCU4
Stacker with cutter ST4/L
5.4
Stacker with cutter ST4/M
5.5 Base frame A4+
Rewinding labels, unwinding labels
6.1 Rewind guide plate for internal rewinding
6.2 External rewinder for direct printer connection
6.3 External rewinder with built-in power supply
6.4 External unwinder for rolls up to 300 mm diameter
6.5 Adapter kit A2+, A4+, A6+, A8+
6.6 Adapter kit XC4, XC6
Dispensing labels
7.1 Peel-off adapter PS5 for automatic operation
7.2 Extended peel-off plate
7.3 Present sensor PS6 for manual or automatic operation
7.4 Present sensor PS8 for manual operation
7.5 Present sensor PS9 variable
For dispensing labels
8.1 Hand switch TR1
8.2 Foot switch
8.3 Interface connector/15-pin Sub-D plug
8.4 Product sensor
8.5 Testbox 2 - automatic operation
Applicators and dispensing module
9.1 Dispensing module A5100
9.2 All-around labeler
9.3 Applicator A1000
Tamp pad A1021 WxH
9.4 Universal tamp pad A1021 70x60
Universal tamp pad A1021 90x90
Tamp pad A1321 WxH
9.5 Universal tamp pad A1321 116x102
Universal tamp pad A1321 116x152
9.6 Blow pad A2021 WxH
9.7 Roll-on pad A1411 WxH
9.8 Applicator A3200
9.9 Tamp pad A3221 WxH
9.10 Blow pad A3221 WxH
Label dispensers and applicators
10.1 Mounting plate
10.2 Profile 40/80/120 mm
10.3 Base plate 500x255 mm
10.4 Floor stand 1600
10.5 Printer holder A2+, A4+, A6+
Software
11.4 Database Connector
11.6 Administration Network Manager
Label software cablabel S3 Lite
11.7
Label software cablabel S3 Pro
11.10 Programming manual
14
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
Basic
device
Peel-off
device
A2+
A4+
A6+
A8+
A4+M
XD4
A4+T
XD4T
XC4
XC6



-






































-







-






-





-






-




-




-











































































-

-






-

-








-







-



-

-
-






-





-





-




-




-


-


-


-


-




















-
-
-
-
-
-
-
-















-
-
-
-
-
-
-
































-
-
-
-
-
-
-
-












-
-
-
-
-
-
-



























































-

-

-

-




































Accessories - special equipment, interfaces, connecting cables
Extra equipment
2.1
Metal cover
On request, label printers A4+ and A6+
are available with metal cover (standard with the A8+).
2.2
Print roller DR4-M25
For small and thin materials up to 25 mm width
Print roller DR4-M50
For very thin materials from 20 to 50 mm width
Print roller DR4-M80
For very thin materials up to 80 mm width
2.3
Reflective label sensor
From top
2.4
Adapter 100 mm diameter
To keep bending to a minimum during stacking it is recommended to use a
large core diameter.
2.5
Memory card
CompactFlash Type I
2.6
Standard keyboard
Connection USB, number of keys 115
2.7
External operation panel
If the operation panel is not accessible, after printer installation within a facility,
an external one can be connected. Additional slots are available for CompactFlash
memory card Type I and host interface.
2.8
Pause adapter PS7
For printing in a label loop. Print job is stopped by the pause signal, with
the label being printed finished first.
I/O interface
Inputs: Outputs: No print job,
Pause, external error
printer not ready, print job active
2.9
Interfaces
3.1
3.2
3.3
3.4
Connecting cables
4.1
4.2
Tester CC for linear and 2D barcodes
A camera testing horizontally and vertically printed barcodes directly after printing. If the
code is faulty the print job is stopped and the label removed. The tester CC can be used
with tear-off mode, dispensing mode or external rewinder. For further details please refer
to the operation manual.
Centronics Interface
Bi-directional according to IEEE 1284
RS422/RS485
1,200 to 230,400 baud/8 bit
Label selection – I/O box
From a higher-level control, like a PLC, up to 16 different labels can be selected from the
memory card. The I/O box via abc programming enables to realize easy PLC programming
with four in- and outputs each.
WLAN 802.11b/g
Connecting cable RS232 C, 9/9-pin, length 3 m
Patch cable CAT 5e, length 3 m, gray
15
Accessories - cutting labels, perforating labels, stacking labels
5.1
Cutter CU
Used to cut paper labels, self-adhesive labels, cardboard, textile or
synthetic materials as well as heat shrink tubes.
Cutter tray
Up to about 50 labels may be collected in the cutter tray.
Cutter
CU2
Usage
5.2
5.3
CU4
CU6 CU8
A4+M, A4+T A6+
A8+
XD4, XD4T, XC4 XC6
67
120
110
180 232
60-500
0.05-0.8
>5
2.5
130
120
110 100
When final position of cutter is not reached
A2+
Material width
up to mm
Material weight cardboard gr/m2
Material thickness
mm
Cutting length
mm
Gap height
up to mm
Cuts/min.
Stop print job
Cutter tray 4 for A4+, A4+M
Label height up to mm
A4+
100
Perforation cutter PCU4
Enables the perforation of the material for later manual separation.
Perforation cutter
PCU4
Usage
A4+, A4+M, A4+T, XD4, XD4T, XC4
Material width
up to mm
85
Material weight cardbaord gr/m2
60-300
Material thickness
mm
0.05-0.8
Cutting length
mm
>5
Gap height
up to mm
4.5
Cuts/min.
Cutting 120/perforating 150
Stop print job
When final position of cutter is not reached
Perforating: Web width
mm
0.5
Web distances mm
2.5 or 10
5.4
Stacker with cutter ST4
Printed materials are cut and stacked. The print job is stopped as soon
as the maximum stack height is reached. Even stiff or curved materials
may be processed to some extent. We recommend to have your
material tested at our facilities.
Stacker with cutter
Usage
Material width
up to mm
Material weight cardboard gr/m2
Material thickness
mm
Cutting length
mm
Gap height
up to mm
Cuts/min.
Stop print job
Stack height
ST4/L
A4+, XC4
20-110
ST4/M
A4+M, A4+T, XD4, XD4T
20-100
60-300
0.05-0.8
20-150
1.2
120
When final position of cutter is not reached,
when cover open, when stack height reached
up to mm
100
Storage table label WxH
Storage table and protective cover are adapted to the label
size and need to be ordered separately.
5.5
16
Base frame A4+
Used to place the devices on the table in any position.
Accessories - rewinding labels, unwinding labels
Rewind guide plate RG for internal rewinding
Internal rewinding is done by dispensing printers. In this case, the peel-off
plate is replaced by the rewind guide plate.
6.1
Rewind guide plate
Usage
Material widthup to mm
Roll diameter up to mm
Core diameter
mm
Label winding
RG2
RG4
A2+ dispensing version
A4+ dispensing version
67
120
140
140
40
40
Outer
External rewinders ER1/2/3 for direct printer connection
The rewinder is directly screwed onto the printer. Labels are optionally
wound either inner or outer side. Electronic control by the swing arm
ensures a smooth and tight winding.
6.2
External rewinder
Usage
Material widthup to mm
Roll diameter up to mm
Core diameter
mm
Label winding
A2+
67
205
ER1/210
A4+
120
205
ER2/210
A6+
ER3/210
A8+
180
205
235
205
40/76
Outer or inner
External rewinders ER4/6/8 with built-in power supply
The rewinder may be attached to any external printer. All other technical
data according to rewinders ER1/2/3.
6.3
External rewinder
ER4/210
ER4/300
ER6/300 ER8/300
A4+,
A2+
A4+,
A6+
A8+
A4+M, A4+T,
A4+M,A4+T,
Usage
XD4, XD4T
XD4, XD4T
XC4
XC4
XC6
Material widthup to mm 67
120
67
120
180
235
Roll diameterup to mm 205
205
300
300
300
300
Core diameter mm
40 / 76
Label winding
Outer or inner
Operating voltage
100-240 V ~ 50/60 Hz
A2+
For exact alignment of the external rewinder to the printer
an adapter kit is offered.
6.5
6.6
For A2+, A4+, A6+, A8+
For XC4, XC6
Adapter kit
Adapter kit
External unwinders EU4/6/8
Ensure a smooth label feed with heavy rolls. Both inner and outer site
wound rolls may be used.
6.4
External unwinder
Usage
Material widthup to mm
Roll diameter up to mm
Core diameter
mm
Label winding
A2+
67
300
EU4/300
EU6/300
A4+, A4+M, A4+T
A6+
120
180
300
300
40/76
Outer or inner
EU8/300
A8+
235
300
For exact alignment of the external unwinder to the printer
an adapter kit is offered.
6.5
Adapter kit
For A2+, A4+, A6+, A8+
17
Accessories - dispensing labels
1
Dispensing printers (“P” types) additionally need to have a
peel-off adapter or present sensor. Different types for either
manual operation, or via hand switch, foot switch or an
external signal are available.
1
Dispensing labels
7.1
7.2
7.3
Peel-off adapter PS5 for automatic operation
Printing and dispensing the label is triggered via external signal. The label is removed by
an applicator or robot.
I/O interface
Inputs: Outputs:
Start
No print job
Label removed
Printer not ready
External error
Print job active
Label in dispensing position
Extended peel-off plate
For labels particularly difficult to remove from liner the peel-off plate with rewind guide
plate, extended by 10 mm, is used. Only in connection with present adapter PS5 or an
applicator.
Present sensor PS6
1. Manual operation
The present sensor detects the label being in dispensing position and interrupts the print
job. As soon as the label has been manually removed the next one is printed immediately.
2. Automatic operation
Dispensing via hand switch, foot switch, or an external signal
I/O interface
Inputs: Outputs:
Start
No print job
External error
Printer not ready
Print job active
Label in dispensing position
7.4
Present sensor PS8 for manual operation
The present sensor detects the label being in dispensing position and interrupts the print
job. As soon as the label has been manually removed the next one is printed immediately.
7.5
Present sensor PS9 variable
For dispensing e.g. round labels where the leading edge of the label cannot be detected
by the PS8. Extension is customized.
18
Accessories - for dispensing labels
For peel-off adapter PS5,
present sensor PS6,
pause adapter PS7,
For dispensing labels
8.1
8.2
8.3
8.4
8.5
9.1
dispensing modules A5104/A5106,
applicator A1000,
applicator A3200
Hand switch TR1
Printing and dispensing on demand
Foot switch
Printing and dispensing on demand
Interface connector/Sub-D plug
Sub-D plug 15-pin with screw clamps for PS5, PS6, PS7 and applicators. To connect
external control signals.
Product sensor
For automatic product detection on the conveyor belt
Testbox 2
Simulation of automatic operation
Dispensing module with peel-off adapter PS5
For labeling packages on a conveyor belt. The product sensor triggers
the printing process. Labeling is started and at the same time the next
label is printed. Conveyor speed and print speed need to be synchronized.
Usage
Label width Label height
Product surface
Product height
mm
mm
Product during labeling
9.2
A5104
A4+
25-116
A5106
A6+
50-176
25-200
Flat
Fixed
In motion
with speed synchronized to printer
All-around labeler
Combined with the A1000 applicator labels on cylindrical objects around
the entire circumference of 360° can be applied. The product is put on
the rolls and labeling is started via hand or foot switch.
All-around labeler
Usage
Product diameter
mm
Product surface
Product during labeling
Tamp pad
Label width
mm
Label height
mm
A2+, A4+ with applicator A1000-220
12-40
Cylindrical
In rotary motion
A1021 WxH
25-116
25-140
19
Applicator A1000
Real-time application
Combined with the A2+, A4+ and A6+ printers the A1000 applicator
means a cost-effective solution - for both semi-automatic operation and
integration into product lines. For operation compressed air of 4,5 bar is
needed.
9.3
1
1 Long service life
The ball-bearing guide bars are low-wearing.
2
2 Variable product heights
The lifting cylinder allows labeling at different heights. Different stroke
heights are available.
Pre-dispensing button
For testing the labeling process. Pushing the button the first time
causes the label to be printed and held by the pad. Pushing the
button again starts the application. 3
4
Compressed air regulation unit
Microfilters prevent contamination. The compressed air regulator
ensures a permanent high labeling quality.
5 High process reliability
The supporting air jet stream, induction air and lifting speed can be adjusted. The pressure can be reduced to less than 10 N (1 kg) for
highly sensitive products and packages. To avoid contamination of
the vacuum holes, these are cleaned with air pressure after each application.
3
6 Label sizes
Labels with 25 to 176 mm width and 25 to 200 mm height can
be applied.
4
7 Supporting air
Used for blowing the label onto the pad
5
6
8 Digital I/O interface
A PLC, sensor or hand switch starts the labeling. At the same time, status and error messages are issued.
7
8
Inputs:
Start
Print first label
External error
Stop (external error)
External reset only for 25-pin
Applicator
Usage
Cylinder stroke
Tamp stroke
below device Compressed air
20
Outputs:
Printer not ready
No print job
Collective alarm
Home position reached
Labeling position reached
Labeling error
A1000-220
A1000-300
A1000-400
A2+, A4+, A6+ A2+, A4+, A6+ A2+, A4+, A6+
mm
220
300
400
mm
bar
70
150
4.5
250
Accessories - Applicator A1000
9.4
Tamps
Labels are applied on the tamp and held by vacuum. Tamp and label are
then moved to the product by applicator.
Universal tamp pad
The rasterized vacuum holes are covered by a foil and are pierced
according to the label size.
Tamp pads are manufactured according to the label size.
Universal tamp pads
Tamp pad
A1021 70x60
A1021 90x90
A1021 WxH
Usage
A2+
A4+
A4+
A2+
A4+
A6+
Label width mm 25-63 25-70
25-90
25-63 25-116 50-176
Label height mm
25-60
25-90
25-200
Product surface
Flat
Product height
Variable
Product during
Not moving
labeling
9.5
Tamp spring-mounted
The spring deflection allows labeling even on inclined surfaces.
Universal tamp pad
The rasterized vacuum holes are covered by a foil and are pierced
according to the label size.
Tamp pads are manufactured according to the label size.
Usage
Label width mm
Label height mm
Product surface
Product height
Product during
labeling
9.6
Tamp pad
A1321 WxH
A4+
A6+
25-116 50-176
25-200
Not moving
Blow pad
In case of pressure-sensitive products, the label can be blown on. Thus,
the blow pad moves to a fixed height. The product to be printed is
positioned about 10 mm below.
Blow pad
Usage
Label width mm
Label height mm
Product surface
Product height
Product during
labeling
9.7
Universal tamp pads
A1321 116x102
A1321 116x152
A4+
A4+
25-116
25-116
25-102
25-152
Flat
Variable
A2021
A4+
A2+
25-63
A6+
50-176
25-116
25-100
Flat
Fixed
Not moving or in motion
Roll-on pad
Using the roll-on pad the label is moved to below the roll. The pad moves
onto the product and the label is rolled on during transport.
Roll-on pad
Usage
Label width mm
Label height mm
Product surface
Product height
Product during
labeling
A4+
25-116
80-200
A1411
A6+
50-76
80-200
Flat
Variable
In motion
21
Applicator A3200
9.8
4
5
3
2
6
1
7
8
Real-time application
With the A3200 applicator labels that are printed with the A2+ or A4+
printers are automatically applied on a product. A rotary cylinder allows
positioning the label between 45° and 95°. Finally, the label is placed on
the product via short stroke cylinder.
1
Long service life
The ball-bearing guides are low-wearing.
2
Variable angular position
The rotary cylinder allows labeling on horizontal, inclined and vertical
surfaces.
3
Pre-dispensing button
For testing the labelling process. Pushing the button the first time
causes the label to be printed and held by the pad. Pushing the
button again starts the application.
4
Compressed air regulation unit
Microfilters prevent contamination. The compressed air regulator
ensures a permanent high labeling quality.
5
High process reliability
The supporting air jet stream, induction air and lifting speed can be adjusted. The pressure can be reduced to less than 10 N (1 kg) for
highly sensitive products and packaging. To avoid contamination of
the vacuum holes, these are cleaned with air pressure after each application.
6
Label sizes
Labels with 4 to 116 mm width and 5 to 80 mm height can
be applied.
7
Supporting air
Used for blowing the label onto the pad
8
Digital I/O interface
A PLC, sensor or hand switch starts the labeling. At the same time, status and error messages are issued.
Inputs:
Start
Print first label
External error
Stop (external error)
External reset only for 25-pin
Outputs:
Printer not ready
No print job
Collective alarm
Home position reached
Labeling position reached
Labeling error
Applicator
Usage
Rotary cylinder
Lifting cylinder up to mm
Compressed air
bar
9.9
9.10
22
A3200
A2+, A4+
45°-95°
30
4.5
Tamp pads or blow pads are manufactured according to the label size.
Usage
Label width mm
Label height mm
Product surface
Product during labeling
Tamp pad A3221
A2+
A4+
4-63
20-116
5-80
Blow pad A3221
A2+
A4+
10-63
20-16
10-80
Flat
Not moving
In motion
Accessories - mounting equipment
Mounting foot (for A2+, A4+)
For fastening the print and apply system and product holder.
10.1
1
Mounting plate
The print and apply system is fastened on the mounting plate.
2
Profile
Standard lengths 40, 80, 120 mm. The aluminum square profile
can also be manufactured in other lengths upon request.
3
Base plate
For fastening the product holder
Standard size 500x255 mm
10.2
10.3
Floor stand
Enables the printer to be quickly and flexibly integrated into any
manufacturing line. Height and width of the labeling position are
easy to adjust. Four guide rollers at the chassis provide for
mobility. The floor stand is adjusted with adjustable feet at the
place of operation.
10.4
10.5
Floor stand
Total height Labeling height
Projection until middle of label Chassis WxDxH
10.5
mm
up to mm
mm
mm
1600
1600
1400
230-500
600x860x140
Printer holder
The A2+, A4+ or A6+ label printers are
fixed on the plate and quicklocked.
23
Label software cablabel S3
cablabel S3 concentrates label design, print control and monitoring of all cab marking systems. The development of devices
and software is synchronized.
Highlights
Like no other software available cablabel S3 develops the full
potential of cab devices. The software utilizes the JScript code
to the full extent. The Pro product imports existing JScript files,
so you can switch over easily to new software. With the new
layer technology the user designs a label which works for all
established devices and resolutions. Intelligent print control evaluates both device and resolution for printout and provides the
proper data. Thus, possible sources of error are reduced.
cablabel S3 also maximizes the integration of database connections via Database Connector. After designing the label, the
software provides all files to be stored within the printer for
database connections. Stand-alone operation independend
from a host system is supported. In addition the software creates interfaces which are easy to handle for SAP connection or
other devices like PLC, scales and barcode testers.
Functional range
Every company designs and formats their label printing differently. For example, label creation and production are executed
by different employees. To adopt the software package to
specific needs, cab offers different software packages.
• cablabel S3 Lite is offered free of costs with every cab printer and allows to create and print labels.
• With cost-saving cablabel S3 Pro label designs for profes-
sional technical solutions can be created.
• cablabel S3 Viewer shows the preview of a label in the Windows Explorer and - like the Lite product - is delivered free of costs with every cab printer. The Viewer may support showing examples during the approval processes or supplier requirements.
• cablabel S3 Print is provided for users in production or ware-
house. The user interface is simplified and provides only those
functions which are required for label printing.
Other products like cablabel S3 Pro Laser, Print Laser and Print
Server are in preparation.
24
Integration
No printer works isolated. In a productive environment it is
connected to other equipment or networks for control and
monitoring. cab offers various possibilities to integrate the
printer into your business environment.
Control
Every cab printer can be directly coded with the simple programming language JScript and an extensive instruction set.
Direct programming is supported by cablabel S3, but may also
be created with any text editor.
As an integrated element of the firmware, the abc Basic Compiler enables the printer to process data via BASIC programming before it is sent for print editing. That way, you replace
external printer languages or integrate data from other systems, e.g. scale or PLC.
11.4 The Database Connector enables printers to access data
directly from a central ODBC- or OLEDB compatible database
and to print it as a label.
In cooperation with SAP* cab developed the so-called replace
method to control cab printers quickly and easily from SAPScript
using SAP R/3. Using this method the host computer only
sends the JScript variable, respectively changed data to the
printer. As a Silver Level Partner in SAP's printer vendor program, cab has access to SAP development environments for
optimum printer support.
11.10 The Programming manual explains and describes commands for different printer models via direct programming with
JScript and abc and the connection of the printer to databases
via Database Connector.
For printer control via PC drivers are available for Windows
operating systems. For A+ printers in addition CUPS-based
drivers for Mac OS X and Linux. The drivers ensure optimum
stability on your operating system.
Monitoring
Using standard programs such as the web browser or
FTP clients, the integrated HTTP and FTP servers enable
printer monitoring and configuration, firmware updates and
memory card administration. Status, warning and error
messages are sent to administrators or users via e-mails or
SNMP datagrams via SNMP and SMTP clients. A time server
is used to synchronize time and date.
11.6 The Administration Network Manager enables the user to
control a number of printers across a network simultaneously.
It supports monitoring, configuration, firmware updates, memory
card administration, file synchronization and PIN administration
centrally.
* SAP is a registered trademark of SAP AG.
25
Stand-alone operation
Printing without PC
Stand-alone operation is the ability of cab printers to print labels
even if these devices are not connected to the host system.
The layout is designed with a special label software or direct
programming via PC.
Label formats, fonts, text and graphics data as well as database
contents are saved or read on the CompactFlash memory card,
USB stick or internal IFFS printer memory.
Only variable data to be printed is sent to the printer via keyboard
or host. Additionally, data sent by a barcode scanner or scale can
be processed.
Easy maintenance
Label sensor
For cleaning the label sensor is unlocked and pulled out with slight
finger pressure.
Print head
The print head may be exchanged in just few steps. No need of
adjustments and settings.
Print roller
Three screws allow an easy and fast removing of the print roller for
cleaning or replacement.
Assembling tool
For replacing wear parts or mounting peripherals ONE single tool is
inserted in the printer ready to hand.
26
Service
Well-trained cab service engineers give worldwide support in
maintenance and repair. Please send your printer to one of cab's
service centres or one of our selected service partners. We will
check and repair your printer within a few days. If requested, we
will make a temporary equivalent device available for the time of
repair.
Training
We offer information on the programming of different software
tools, printer drivers and label layout design. Enhance your
knowledge on cab printers to make more effective use of cab
printers. We also offer seminars for maintenance and repair.
27
Label printers - product range
Part no.
Printersdpi
Part no.
Print heads dpi
5954511
5954512
Label printer A2+ Label printer A2+ 300
300P
5954105.001
Print head 2
300
5954575
5954578
Label printer A2+ Label printer A2+ 600
600P
5958686.001
Print head 2
600
5954500
5954505
Label printer A4+ Label printer A4+ 200
200P
5954081.001
Print head 4
203
5954501
5954506
Label printer A4+ Label printer A4+ 300
300P
5954072.001
Print head 4
300
5954502
5954507
Label printer A4+ Label printer A4+ 600
600P
5954077.001
Print head 4
600
5954524
5954526
Label printer A4.3+ Label printer A4.3+ 200
200P
5954085.001
Print head 4.3 203
5954525
5954527
Label printer A4.3+ Label printer A4.3+ 300
300P
5954089.001
Print head 4.3 300
5954587
5954588
Label printer A6+ Label printer A6+ 200
200P
5954217.001
Print head 6
203
5954513
5954514
Label printer A6+ Label printer A6+ 300
300P
5954106.001
Print head 6
300
1.4
5954517.101
Label printer A8+ with metal cover
300
5954107.001
Print head 8
300
1.5
5954552
5954554
Label printer A4+M Label printer A4+M 300
600
5954072.001
5954077.001
Print head 4
Print head 4
300
600
1.6
5959640
Label printer XD4 300
5954072.001
Print head 4
300
5954180.001
Print roller DR4
1.7
5954568
595xxxx**
Label printer A4+T Label printer A4+T 300
600
5954072.001
5954077.001
Print head 4
Print head 4
300
600
5954180.001
Print roller DR4
1.8
5959970
Label printer XD4T 300
5954072.001
Print head 4
300
5954180.001
Print roller DR4
1.9
5965700
Label printer XC4 300
5954072.001
Print head 4
300
5954180.001
Print roller DR4
1.10
5965701
Label printer XC6 300
5954106.001
Print head 6
300
5954245.001
Print roller DR6
Part no.
Special printers
59545xx.101*
Printer with metal cover
for A4+, A4+M, A4+T or A6+
Scope of delivery:
Label printer,
power cable E+F type, length 1,8 m,
connecting cable USB, length 1,8 m,
operation manual de/en
595xxxx*
Label printer for
thermal direct printing
on request
1.1
1.2
1.2
1.3
1.11
1.12
* Instead of "x" please choose the article no. of the cab printer
as listed above.
** User specific article no. following request
28
Part no.
Wear parts
5954102.001
5954104.001
Print roller DR2
Rewind assist roller RR2
5954180.001
5954183.001
Print roller DR4
Rewind assist roller RR4
5954245.001
5954246.001
Print roller DR6
Rewind assist roller RR6
5954103.001
Print roller DR8
5954180.001
5954183.001
Print roller DR4
Rewind assist roller RR4
DVD:
Operation manual in more than 20 languages (only with A+ series),
operation manual de/en/fr/es/it (with X series)
configuration manual de/en/fr,
service manual de/en,
spare parts list de/en,
programming manual en,
printer drivers 32/64 bit in more than 20 languages for
Windows XP
Server 2003
Windows Vista
Server 2008
Windows 7
Server 2008 R2
Windows 8
Server 2012
Windows 8.1
Server 2012 R2
Mac OS X drivers de/en/fr (only with A+ series),
Linux drivers de/en/fr (only with A+ series),
Label software cablabel S3 Lite, cablabel S3 Viewer
Database Connector
Accessories - product range
Part no.
Special equipment
Part no.
Rewinding labels, unwinding labels
5954012.001
5954013.001
Metal cover for A4+
Metal cover for A6+
5954108.001
Rewind guide plate RG2
for internal rewinding
5954190.001
5953700.001
Print roller DR4-M25
Rewind guide plate RG4
for internal rewinding
5953701.001
Print roller DR4-M50
5953702.001
Print roller DR4-M80
6.2
5948102
5943251
5945802
External rewinder ER1/210
External rewinder ER2/210
External rewinder ER3/210
2.3
5958631
Reflective label sensor
from top
2.4
5959622.001
Adapter 100
6.3
2.5
5561043
Memory card
CompactFlash Type I
5948100
5946090
5946420
5945804
External rewinder ER4/210
External rewinder ER4/300
External rewinder ER6/300
External rewinder ER8/300
2.6
5901626
Standard USB keyboard
German version
6.4
5946091
5946421
5945806
External unwinder EU4/300
External unwinder EU6/300
External unwinder EU8/300
6.5
5948170
Adapter kit for A2+, A4+, A6+, A8+
6.6
5965712
5965713
Adapter kit for XC4
Adapter kit for XC6
Part no.
Dispensing labels
7.1
5946120
Peel-off adapter PS5
Automatic operation
7.2
5958772
5948830
5958565
Extended peel-off plate A2+
Extended peel-off plate A4+
Extended peel-off plate A6+
7.3
5942353
Present sensor PS6
Manual/automatic operation
7.4
5946900
Present sensor PS8
Manual operation
7.5
5948595
Present sensor PS9
Variable
Part no.
Accessories for dispensing labels
8.1
5942345
Hand switch TR1
8.2
5535901
Foot switch
8.3
5917652
Interface connector
15-pin SUB-D plug
Phoenix Contact 2761606
8.4
5941526
Product sensor
8.5
5533240
Testbox 2
Automatic operation
2.1
2.2
2.7
5954380
External operation panel
2.8
5946146
Pause adapter PS7
2.9
5571005
5571000
Barcode tester CC2
Barcode tester CC4
Part no.
Interfaces
3.1
5954200
Centronics according to IEEE 1284
3.2
5954201
RS422/RS485
3.3
5954191
Label selection – I/O box
3.4
5561041
WLAN 802.11b/g
Part no.
Connecting cables
4.1.
5550818
Connecting cable RS232 C
9/9-pin, length 3 m
4.2
5918008
Patch cable CAT 5e, length 3 m, gray
Part no.
Cutting, perforating, stacking
5.1
5948382
5948000
5948001
5948002
Cutter CU2
Cutter CU4
Cutter CU6
Cutter CU8
5.2
5946995
Cutter tray 4
5.3
5960050.351
5960050.352
Perforation cutter PCU4/2,5
Perforation cutter PCU4/10
5541311
5541313
Stacker with cutter ST4/L
Stacker with cutter ST4/M
55xxxxx**
55xxxxx**
Storage table ST4/L, label WxH
Storage table ST4/M, label WxH
5958932
Base frame A4+
6.1
5.4
5.5
** User specific article no. following request
29
Accessories - product range
Part no.
Applicators and dispensing modules
9.1
5949281
5949265
Dispensing module A5104
Dispensing module A5106
9.2
5941345
All-around labeler
Part no.
Mounting equipment
5969811
5958367
Mounting plate for A2+
Mounting plate for A4+
5958365
5965929
5971136
Profile 40
Profile 80
Profile 120
5xxxxxx**
Profile L
10.3
5961203
Base plate 500x255
10.4
5947400
Floor stand 1600
10.5
8914422
8913693
8914423
Printer holder for A2+
Printer holder for A4+
Printer holder for A6+
Part no.
5588000
Label software
cablabel S3 Lite
5588001
5588100
5588101
5588150
5588151
5588152
cablabel S3 Pro 1 WS
cablabel S3 Pro 5 WS
cablabel S3 Pro 10 WS
cablabel S3 Pro 1 additional licence
cablabel S3 Pro 4 additional licences
cablabel S3 Pro 9 additional licences
5588002
5588105
5588106
5588155
5588156
5588157
cablabel S3 Print 1 WS
cablabel S3 Print 5 WS
cablabel S3 Print 10 WS
cablabel S3 Print 1 additional licence
cablabel S3 Print 4 additional licences
cablabel S3 Print 9 additional licences
starting 1st
quarter 2015
cablabel S3 Print Server
10.1
10.2
9.3
9.4
9.5
9.6
9.7
5949001
5949002
5949003
Applicator A1000-220
Applicator A1000-300
Applicator A1000-400
5xxxxxx**
Tamp pad
A1021 WxH
5949072
Universal tamp pad
A1021 70x60
5949075
Universal tamp pad
A1021 90x90
5xxxxxx**
Tamp pad
A1321 WxH
5949076
Universal tamp pad
A1321 116x102
5949077
Universal tamp pad
A1321 116x152
5xxxxxx**
Blow pad
A2021 WxH
5xxxxxx**
Roll-on pad
A1411 WxH
5976050
Applicator A3200
9.9
5xxxxxx**
Tamp pad
A3221 WxH
9.10
5xxxxxx**
Blow pad
A3221 WxH
9.8
11.7
** User specific article no. following request
11.10
30
9008486
Programming manual en,
printed copy
cab product range at a glance
Label printer EOS1
The compact one for
label rolls up to 155 mm diameter
Label printer EOS4
The cost-effective one for
label rolls up to 210 mm diameter
Label printer EOS mobile
Both EOS sizes with
battery pack for mobile print
Label printers A+ series
The universal ones
Label printer A4+M
With centered material positioning
Label printer A4+T
With centered material positioning
also for textile materials
Label printers XD4, XD4T
Double-sided printing
Label printers XC series
Two-color printing
Label dispenser HS
Precise and easy horizontal
dispensing up to 180 mm width
Label dispenser VS
Precise and easy vertical
dispensing up to 180 mm width
Print and apply system Hermes+
For automation
Print modules PX series
For integration into
automatic labeling systems
Consumables
Precise printing with cab labels
and ribbons
Label software cablabel S3
Standard and optional
Laser marking system FL+ series
Precise and fast
Laser safety housing
The industrial solution
31
1
Headquarter and fabrication in Germany
2
to 7 International
subsidiaries
There are furthermore 820
distribution partners in more
than 80 countries.
1
2
3
6
4
5
7
Germany
cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
76131 Karlsruhe
phone +49 721 6626 0
fax +49 721 6626 129
info@cab.de
www.cab.de
France
cab Technologies S.à.r.l.
2a Rue de la Moder
Z.A. Nord du Val de Moder
67350 Niedermodern
phone +33 388 722501
fax +33 388 722502
info.fr@cab.de
www.cab.de/fr
Mexico
Alejandro Balmaceda
Hacienda Jurica Pte 1615
Colonial de Valle
32553 Ciudad Juárez
phone +52 656 682 3745
fax +52 656 682 4301
a.balmaceda@cab.de
www.cab.de/es
Taiwan
cab Technology Co., Ltd.
cab Produkttechnik
Sömmerda GmbH
Am Unterwege 18-20
99610 Sömmerda
phone +49 3634 6860 0
fax +49 3634 6860 129
info@cab.de
www.cab.de
USA
cab Technology, Inc.
87 Progress Avenue Unit 1
Tyngsboro, MA 01879
phone +1 978 649 0293
fax +1 978 649 0294
info.us@cab.de
www.cab.de/us
South Africa
cab Technology (Pty) Ltd.
14 Republic Street
Bordeaux
2125 Randburg
phone +27 11 886 3580
fax +27 11 789 3913
info.za@cab.de
www.cab.de/za
China
cab (Shanghai) Trading Co., Ltd
16F-1, No. 700, Jhong Jheng Rd
Junghe, Taipei 23552
phone +886 (02) 8227 3966
fax +886 (02) 8227 3566
info.asia@cab.de
www.cab.de/tw
A507, No. 268, Tong Xie Rd
Shanghai 200335
phone +86 (021) 6236 3161
fax +86 (021) 6236 3162
info.cn@cab.de
www.cab.de/cn
This documentation as well as translations hereof are property of cab Produkttechnik GmbH & Co. KG. © cab/9008476
Any replication, conversion, duplication or divulgement in whole or in parts demands our previous written authorization.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising