Trendnet TEG-S224 24-Port 10/100Mbps Switch Datasheet

gigabit
26-port 10/100/1000Mbps Copper Gigabit
Switch
TEG-S224
TRENDnet's TEG-S224 is a 26-port 10/100/1000Mbps Gigabit
Ethernet Switch with 24 10/100Mbps Fast Ethernet ports and 2
10/100/1000Mbps Copper Gigabit Ethernet ports. Users can
connect Servers to the Gigabit port(s) to increase network
performance or uplink Copper Gigabit Switches together to create
a high-bandwidth Gigabit backbone. TRENDnet's TEG-S224
provides simple migration, scalability and flexibility to handle new
applications and data types making it a highly reliable and cost
effective solution for high-speed network connectivity.
FEATURES
• 24 x 10/100Mbps Auto-negotiation MDIX Fast Ethernet Ports
• 2 x 10/100/1000Mbps Auto-negotiation, Auto-MDIX Gigabit Ports
• Full/Half duplex transfer mode for each port (full duplex mode only for Gigabit)
• Store and Forward switching method
• 8.8 Gbps Switching Fabric
• Integrated address Look-Up Engine with 8K absolute MAC address table
• Supports 2.5MB RAM data buffering
• IEEE 802.3x flow control for Full Duplex mode
• Back pressure flow control for Half Duplex mode
• Extensive Front-Panel Diagnostic LEDs
• Standard 19” Rack-mount design
• 3-Year Limited Warranty
TEG-S224
rev:09.24.2010
26-port 10/100/1000Mbps Copper Gigabit Switch
TEG-S224
SPECIFICATIONS
Hardware
LAN Standards
Network Media
• IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3x Full Duplex Flow Control
Protocol
• CSMA/CD
Topology
• Star
• Ethernet: UTP/STP Cat. 3, 4, 5, Fast Ethernet: UTP/STP Cat. 5 , Gigabit : UTP/STP Cat. 5, Cat 5E (Recommend)
• 24 x 10/100Mbps Auto Negotiation, Auto-MDIX Fast Ethernet ports
LAN Port
• 2 x 10/100/1000Mbps Auto Negotiation, Auto MDIX Gigabit ports
Address Table
• 8K entries per device
Data RAM buffer
• 2.5MB per device
Data Transfer Rate
• Fast Ethernet: 100/200Mbps – Half/Full Duplex
• Ethernet: 10/20Mbps – Half/Full-Duplex
• Gigabit Ethernet: 1000/2000Mbps – Half/Full Duplex
• Per Unit: Power System
Diagnostic LEDs
• Per Fast Ethernet Port: Link/ACT, 100M (port 1~24)
• Per Gigabit Ethernet Port: Link/ACT, 1000M, 100M (port 25, 26)
Power Consumption
• 11.75 Watts. Max
Power Supply
• 100-240V AC, 50/60Hz Internal Universal Power Supply
Dimensions
• 440 x 140 x 44 mm (17.32" x 5.5" x 1.73")
Weight
• 4.7 lb
• Operating: 0°~ 40°C (32°~ 104°F)
Temperature
• Storage: -10°~ 70°C (14°~ 158°F)
Humidity
• 10% ~ 90% (no-condensing)
Certifications
• CE, FCC
NETWORKING SOLUTIONS
RELATED PRODUCTS
26-Port 10/100/1000Mbps Copper Gigabit Switch
(TEG-S224)
TEG-S224
26-port 10/100/1000Mbps Copper Gigabit Switch
TEG-S18TXE
9-Port 10/100/1000Mbps Copper Gigabit Switch
TEG-S80TXD
8-Port 10/100/1000Mbps Copper Gigabit
Ethernet Switch
5-Port 10/100/1000Mbps
Copper Gigabit Switch
(TEG-S50TXE)
Internet
Workstations with 10/100Mbps Ethernet Card
(TE100-PCIWN)
Cable/DSL
Modem Router
1000Mbps
Workstation with Copper Gigabit PCI Adapter
(TEG-PCITXR)
Workstations with Copper Gigabit PCI Adapter
(TEG-PCITXR)
10/100Mbps
ORDERING INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: 1-310-961-5500
Fax: 1-310-961-5511
Web: www.trendnet.com
Email: [email protected]
To Order Please Call:
1-888-326-6061
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com.
Copyright © TRENDnet. All Rights Reserved.

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project