Alpine | CDM-7854E | Owner`s manual | Alpine CDM-7854E Owner`s manual

Alpine CDM-7854E Owner`s manual
R
EN
CDM-7857
CDM-7854
CDE-7853
FR
FM/AM Compact Disc Receiver
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
ES
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ES
MUTE
INTLZ
P WR
IND
TUNE
A.ME
SOU
RC
E
40WATTS x 4AMPLIFIER
MODE/BBE
.
D.A.P
DN
BBE
BA
ND
MIN.
ST D.A.P.
UP
MAX.
RPT ALL M.I.X.
CLK
TITLE
F
DX SEEK
BASS FREQ. CONTROL
B.C.
M.I.X.
RPT
1
2
F
SCAN
3
CT
H
M
4
5
6
CD RECEIVER
(CDM-7857)
IT
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-8501, Japan
Tel.: (03) 3494-1101
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Meiyi Printing Factory, Dalian, China
No. 28 Chang Qing Street, Xi Gang District, Dalian, China
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tel.: (03) 9769-0000
ALPINE ELECTRONICS GmbH
Kreuzerkamp 7-11 40878 Ratingen, Germany
Tel.: 02102-45 50
ALPINE ITALIA S.p.A.
Via C. Colombo 8, 20090 Trezzano Sul Naviglio
MI, Italy
Tel.: 02-48 47 81
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord Il
B.P. 50016 F-95945, Roissy, Charles De Gaulle
Cedex, France
Tel.: 01-48 63 89 89
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes
MK14 5BU, U.K.
Tel.: 01908-61 15 56
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava)-Apdo. 133, Spain
Tel.: 34-45-283588
Designed by ALPINE Japan
Printed in China (Y)
68P01149K55-O
SE
CD changer for CDM-7857/
CDM-7854
Changeur CD pour CDM-7857/
CDM-7854
Cambiador de CD para CDM-7857/
CDM-7854
CHA-S624
CHA-1214
CHM-S620
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
An Alpine CD Changer adds more musical choices to your sound system. All models can be controlled from
Alpine head units and deliver excellent sound quality. The CHA-S624 is a high-performance 6-disc changer
with a new M DAC, Ai-NET compatibility, Optical Digital Output, 150 Disc Title Memory and CD TEXT.
The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S620 M-Bus model is a super-compact 6-disc
changer.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Un changeur de CD Alpine permet d'augmenter la plage des sélections musicales de votre système embarqué.
Tous les modèles peuvent être contrôlés à partir des autoradios Alpine et offrent une excellente qualité audio.
Le modèle CHA-S624 est un changeur 6 disques ultra performant compatible Ai-NET et équipé d'un
convertisseur N/A standard, d'une sortie optique numérique, d'une mémoire d'une capacité de 150 titres et de
la fonction CD TEXT. Le modèle CHA-1214 Ai-NET peut contenir 12 disques. Le modèle CHM-S620 MBus est un changeur 6 disques super compact.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
Un cambiador Alpine de CD añade más opciones musicales a su equipo de sonido. Todos los modelos
pueden controlarse desde las unidades principales de Alpine y proporcionar un sonido de calidad
excepcional. El modelo CHA-S624 es un cambiador de 6 discos de alto rendimiento con el nuevo DAC "M"
y compatibilidad con Ai-NET, salida digital óptica, memoria de títulos de 150 discos y TEXTO CD. El
modelo CHA-1214 Ai-NET admite 12 discos y el modelo CHM-S620 Bus-M es un cambiador de 6 discos y
tamaño reducido.
ENGLISH
Contents
Operating Instructions
WARNING
CD Player Operation
Inserting/Ejecting Disc ................................... 10
Normal Play and Pause ................................... 10
Music Sensor (Skip) ........................................ 10
WARNING .................................................. 2
Fast Forward and Backward ........................... 10
CAUTION ................................................... 2
Repeat Play ..................................................... 11
PRECAUTIONS ......................................... 2
M.I.X. (Random Play) .................................... 11
Basic Operation
Scanning Programs ......................................... 11
Displaying and Scrolling CD Text
Detaching the Front Panel ................................. 4
Attaching the Front Panel ................................. 4
Initial System Start-Up ..................................... 4
Turning Power On and Off ............................... 4
Subwoofer On and Off
(CDM-7857/CDM-7854 only) ...................... 5
(CDM-7857 only) ........................................ 11
Controlling CD Changer (Optional)
(CDM-7857/CDM-7854 only) .................... 11
Information
In Case of Difficulty ....................................... 12
Specifications .................................................. 13
Adjusting Volume/Bass/Treble/
Balance (Between Left and Right)/
Fader (Between Front and Rear) ................... 5
Installation and Connections
Turning Loudness On/Off (CDE-7853 only) .... 5
Warning ........................................................... 14
Audio Mute Function ........................................ 5
Caution ............................................................ 14
BBE Mode On/Off
Precautions ...................................................... 14
(CDM-7857/CDM-7854 only) ...................... 5
Installation ...................................................... 15
Setting Bass Frequency ..................................... 5
Connections .................................................... 16
Changing Display Pattern of Audio Level
(CDM-7857 only) .......................................... 6
LIMITED WARRANTY
Changing Lighting Color (CDM-7857 only) .... 6
Displaying Time ................................................ 6
Setting Time ...................................................... 6
Radio Operation
Manual Tuning .................................................. 7
Automatic Seek Tuning .................................... 7
Manual Storing of Station Presets .................... 8
Automatic Memory of Station Presets .............. 8
Storing into Direct Access Preset (D.A.P.)
Band ............................................................... 9
Tuning to Preset Stations .................................. 9
1-EN
WARNING
WARNING
The exclamation point within an equilateral
triangle and "WARNING" are intended to alert
the user to the presence of important
operating instructions.
Failure to heed the instructions will result in
severe injury or death.
CAUTION
The exclamation point within an equilateral
triangle and "CAUTION" are intended to alert
the user to the presence of important
operating instructions.
Failure to heed the instructions can result in
injury or material damage.
DO NOT DISASSEMBLE OR ALTER.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may lead to accident, fire or electric shock.
Blocking them may cause heat to build up inside and may
result in fire.
KEEP SMALL ARTICLES OUT OF THE REACH OF
CHILDREN.
If swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
When problems occur such as a lack of sound or video,
foreign objects inside the unit, smoke coming out, or
noxious odors, stop use immediately and contact the
dealer where you bought the equipment. Failure to do so
may result in an accident or injury.
DO NOT OPERATE THE EQUIPMENT OR LOOK AT
THE SCREEN WHILE DRIVING THE VEHICLE.
Operating the equipment may distract the driver from
looking ahead of the vehicle and cause accident. Always
stop the vehicle in a safe location before operating this
equipment.
DO NOT RAISE THE VOLUME EXCESSIVELY.
Keep the volume at a level where you can still hear
outside noises while driving. Driving while unable to hear
outside noises could be the cause of accident.
DO NOT USE THIS EQUIPMENT FOR PURPOSES
OTHER THAN STATED FOR THE VEHICLE.
Failure to do so may result in electric shock or injury.
DO NOT PLACE FOREIGN OBJECTS IN INSERTION
SLOTS OR GAPS.
Do not insert hands, fingers or foreign objects in the disc
or cassette insertion slots, or in gaps during monitor
startup/storage. Doing so may result in personal injury or
damage to the equipment.
2-EN
STOP THE VEHICLE IF UNIT OPERATION MIGHT
INTERFERE WITH DRIVING.
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between
+60°C (+140°F) and –10°C (+14°F) before turning your
unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the
player and wait about an hour for the moisture to
evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
Never Attempt the Following
Installation Location
Do not grip or pull out the disc while it is being pulled
back into the player by the automatic reloading
mechanism.
Do not attempt to insert a disc into the unit when the unit
power is off.
Make sure the CDM-7857/CDM-7854/CDE-7853 will not
be installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Handling the Detachable Front Panel
• Do not expose to rain or water.
• Do not drop or apply shock.
Inserting Discs
Correct Handling
Your player accepts only one disc at a time for playback.
Do not attempt to load more than one disc.
Make sure the label side is facing up when you insert the
disc. Your player will automatically eject any disc that is
inserted incorrectly. If the player continues to eject a
correctly inserted disc, push the Reset switch (located
behind the detachable front panel) with a pointed object
such as a ball-point pen.
Playing a disc while driving on a very bumpy road may
result in skips, but this will not scratch the disc or damage
the player.
Do not drop the disc while handling. Hold the disc so you
will not leave fingerprints on the surface. Do not affix
tape, paper, or gummed labels to the disc. Do not write on
the disc.
CORRECT
INCORRECT
CORRECT
New Discs
As a protective measure to prevent the CD from jamming,
the CD player will automatically eject discs with irregular
surfaces or inserted incorrectly. When a new disc is
inserted into the player and ejected after initial loading,
using your finger, feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps
or irregularities, this could inhibit proper loading of the
disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ball-point pen or other
such instrument, then insert the disc again.
Center
Hole
Center
Hole
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could
cause the CD player to skip. For routine cleaning, wipe
the playing surface with a clean, soft cloth from the centre
of the disc to the outer edge. If the surface is heavily
soiled, dampen a clean, soft cloth in a solution of mild
neutral detergent before cleaning the disc.
New
Disc
Bumps
Outside
(Bumps)
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and
never use any special shape discs.
Use of special shape discs may cause damage to the
mechanism.
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the
disc to be out of standard specifications and may create
operational problems. We recommend not using these
accessories on discs played in Alpine CD players.
Transparent Sheet
Disc Stabilizer
3-EN
Basic Operation
MUTE
PWR
MODE / BBE
(LOUD)
DN g
f UP
c
B.C.
2
1
Detaching the Front Panel
1
2
3
Press the PWR (Power) button for more than 3
seconds to turn off the power.
Press the (Release) button at lower left corner
until the front panel pops out.
Grasp the left side of the front panel and pull it
out.
NOTES
• The front panel may become hot in normal usage
(especially the connector terminals), this is not
malfunction.
• To protect the front panel, place it in the supplied
carrying case.
Controlable with Remote Control (CDM-7857 only)
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine
dealer.
Initial System Start-Up
Immediately after installing or applying power to the
unit, it should be initialized. To do this, first, remove
the detachable front panel. Behind the front panel, to
the right of the connector, there is a small hole.
Using a pencil or other pointed object, press the red
reset switch mounted behind this hole to complete
the initialization procedure.
1
Reset switch
Turning Power On and Off
Attaching the Front Panel
1
2
First, insert the right side of the front panel into
the main unit. Align the 2 small holes on the front
panel with the 2 projections on the main unit.
Push the left side of the front panel until it locks
firmly into the main unit.
2
1
NOTE
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.
4-EN
1
Press the PWR (Power) button to turn on the
unit.
NOTE
The unit can be turned on by pressing any other button
except the eject c button.
The volume level gradually increases to the previous
level you were listening to before the unit was turned
off. Press the PWR button for more than 3 seconds
to turn off the unit.
NOTE
The very first time the power is turned on, the volume
will start from level 12, the BBE will be on in the tuner
mode*, and the LOUD function will be on**.
* CDM-7857/CDM-7854 only.
** CDE-7853 only.
Subwoofer On and Off (CDM-7857/
CDM-7854 only)
1
Press and hold the c(Eject) button for at least 3
seconds.
With each press, subwoofer is toggled On or Off.
NOTES
• Initial mode is "Subwoofer OFF."
• Set to "Subwoofer OFF" unless the subwoofer is used.
• When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Bass/Treble/Balance/Fader.
Adjusting Volume/Bass/Treble/
Balance (Between Left and Right)/
Fader (Between Front and Rear)
1
Press the MODE button repeatedly to choose
the desired mode.
Each press changes the modes as follows:
→ VOL
→ BAS
→TRE
FAD ←
BAL ←
NOTES
• If the 5 or 6 button is not pressed in 5 seconds after
selecting the BASS, TREBLE, BALANCE, or FADER
mode, the unit automatically sets in the VOLUME
mode.
• When the subwoofer is set to ON, the level of the
subwoofer can be adjusted (CDM-7857/CDM-7854
only).
2
Press the 5 and 6 buttons until the desired
sound is obtained in each mode.
NOTE
The settings of the Bass and Treble will be individually
memorized for each source (FM, AM and CD) until the
setting is changed. Depending on the connected devices,
some functions and display indications do not work.
Audio Mute Function
Activating this function will instantly lower the
volume level by 20 dB.
1
BBE Mode On/Off
(CDM-7857/CDM-7854 only)
The BBE (Barcus Berry Electronics) processor
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of the signal
driving the speakers improves the accurate
reproduction of the sound.
1
The bass control center frequency can be set at
60, 80, 100 or 200 Hz.
1
Turning Loudness On/Off
(CDE-7853 only)
1
Press and hold the LOUD button for at least
2 seconds to activate or deactivate the loudness
mode.
The display shows "LOUD" when the loudness
mode is activated.
Press and hold the BBE button for at least 2
seconds to turn on the BBE mode.
Each press toggles between the BBE on and off
modes.
Setting Bass Frequency
2
Loudness introduces a special low- and highfrequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity to
bass and treble sound.
Press the MUTE button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the
audio back to its previous level.
Press and hold the B.C. (Bass Control) button
for at least 3 seconds to turn on the bass control
settings.
Press the DN g or the f UP button to
select the desired Bass center frequency.
Each press changes the center frequency as
follows: 60 Hz, 80 Hz, 100 Hz and 200 Hz.
NOTE
If no buttons are pressed within 5 seconds, the bass
control settings will be turned off automatically.
3
Press the B.C. (Bass Control) button for more
than 3 seconds to turn off the bass control
settings.
5-EN
Basic Operation
1
INTLZ
CLK
H
CT
Changing Display Pattern of Audio
Level (CDM-7857 only)
1
2
2
M
Displaying Time
1
Press the INTLZ button for at least 3 seconds.
Press the Preset 1 button to turn the OLI ON.
The display pattern (Level indicator) will change.
Press the CLK (clock) button repeatedly until the
clock time is displayed.
Each press changes the modes as follows:
CDM-7857: Radio/Changer modes,
CDM-7854/CDE-7853: Radio mode.
Radio frequency or Playing
time mode (CDM-7857 only)
Level indicator
↔ Clock priority
mode
CDM-7857: CD Player mode
→ Playing time → Clock priority → DISC TEXT
mode
OLI ON:
The level indicator bars light up from the left side
to the right side repeatedly in accordance with
the musical signals.
TRACK
TEXT mode
→ Track No.
1
2
3
mode
Press the INTLZ button for at least 3 seconds.
Press the Preset 2 button to change the lighting
color between AMBER OFF (green) and AMBER
ON (amber).
Press the INTLZ button to set the lighting color.
Setting Time
1
2
3
4
6-EN
Clock priority
→ Playing time → mode
mode
NOTE
Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed for
about 5 seconds before the time returns to the display
(CDM-7857 only).
Press the INTLZ button to set the audio level
pattern.
Changing Lighting Color
(CDM-7857 only)
←
CDM-7854/CDE-7853: CD Player/Changer modes
Press the Preset 1 button again to turn the OLI
OFF. The indicator displays the volume level.
3
mode
mode
While the clock time is displayed, press and hold
the CLK (clock) button for at least 3 seconds.
The time indication will begin to blink.
Press the CT button while the time indication is
blinking to set seconds to "0".
Press the "H" button to adjust the hours while the
time indication is blinking.
Press the "M" button to adjust the minutes while
the time indication is blinking.
The time indication will stop blinking 5 seconds
after the last adjustment. The time will
automatically be set.
Radio Operation
SOURCE
TUNE
BAND
DN g
f UP
Manual Tuning
Automatic Seek Tuning
1
1
2
Press the SOURCE button until a radio
frequency appears in the display.
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
2
→ F1 → F2 → AM
3
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
3
Press the DN g or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in.
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ F1 → F2 → AM
NOTE
The initial mode is DX SEEK.
4
Press the SOURCE button until a radio
frequency appears in the display.
4
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
Press the DN g or f UP button to
automatically seek for a station downward or
upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
7-EN
Radio Operation
A.ME
SOURCE
D.A.P./BAND
Manual Storing of Station Presets
1
2
3
4
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold any one of the Preset buttons (1
through 6) for at least 2 seconds until the
station frequency on the display blinks.
Press the Preset button into which you wish to
store the station while the frequency display is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a triangle (9) and station
frequency memorized.
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM and D.A.P.).
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
8-EN
Preset buttons (1 through 6)
Automatic Memory of Station
Presets
1
2
3
Press the SOURCE button to select the radio
mode.
Press the BAND button repeatedly until the
desired radio band is displayed.
Press and hold the A. ME button for at least 2
seconds.
The frequency on the display continues to
change while the automatic memory is in
progress. The tuner will automatically seek and
store 6 strong stations in the selected band.
They will be stored into presets 1 to 6 buttons in
order of signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Storing into Direct Access Preset
(D.A.P.) Band
A combination of radio stations in any band (up to
6 stations) can be manually preset into the D.A.P.
band.
1
Tuning to Preset Stations
1
2
Press the BAND button repeatedly until the
desired band is displayed.
To select the D.A.P. band, press and hold the
D.A.P. button for more than 2 seconds until the
D.A.P. indicator appears in the display.
Press and hold the D.A.P. button for more than 2
seconds until the D.A.P. indicator appears.
Press the BAND button to select FM or AM.
The selected band will be displayed.
To memorize stations onto the D.A.P. band,
follow the steps for the Automatic or Manual
Storing of Station Presets section above.
Press the SOURCE button to select the radio
mode.
3
Press the station Preset button that has your
desired radio station in memory.
The display shows the band, preset number with
a triangle and frequency of the station selected.
NOTE
This function can be used together with the Automatic
Memory Preset.
To cancel the D.A.P. mode, press and hold the
D.A.P. button for more than 2 seconds. The
D.A.P. indicator will turn off.
9-EN
CD Player Operation
- / J SOURCE
DN g
TITLE
M.I.X.
f UP
Inserting/Ejecting Disc
1
RPT
c
SCAN
Disc Select buttons
(1 trough 6)
The display shows the track number and elapsed
time of the track being played. When the last
track is played back the player returns to the first
track and begins playback from that point.
Insert a CD half way into the slot with the label
side facing up. The player automatically draws
the disc into the disc compartment.
If a CD is already loaded in the CD player, press
the SOURCE button to select the CD mode.
2
The Disc indicator appears to show that a disc is
loaded.
NOTE
Three-inch (8cm) CD's can be used.
2
Press the -/J button to temporarily stop CD
playback.
To resume playback, press the -/J button
again.
Music Sensor (Skip)
1
Press the c(Eject) button when you want to
eject the CD.
NOTES
• If the CD is not removed for several seconds after it
has been ejected, the player automatically draws the
CD into the compartment to protect the CD.
• Only compact discs containing the mark shown can be
used; but there is not text indication in the display on
CDM-7854/CDE-7853.
Momentarily press the DN g button once
during CD play to return to the beginning of the
current track. If you wish to access the beginning
of a track further back, repeatedly press until you
reach the desired track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
• We cannot fully guarantee the playback of CD-R (CDRecordable). You cannot playback CD-RW (CDReWritable) on this unit.
Normal Play and Pause
1
Insert a CD. The CD player begins playback from
the first track on the disc.
10-EN
Fast Forward and Backward
1
Press and hold the DN g or f UP button to
quickly move backward or forward until you
reach the desired section of the track.
Repeat Play
1
Press the RPT(Repeat) button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the RPT button again and select OFF to
deactivate the repeat play.
Displaying and Scrolling CD Text
(CDM-7857 only)
While playing the audio CD with CD Text, the disc
and track names can be displayed and scrolled.
1
NOTE
If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the
disc selected (CDM-7857/CDM-7854 only).
→ RPT → RPT ALL → OFF
NOTE
If your CD has no Text Information, NO TEXT appears.
2
NOTE
In case a 6-disc CD changer is connected (CDM-7857/
CDM-7854 only):
Press the "F" button to illuminate the "F" (CDM-7857),
"FUNC" (CDM-7854) indicator and go to step 1.
Press the M.I.X. button in the play or pause
mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence. After all the tracks on the disc have
been played back once, the player will begin a
new random sequence play until the M.I.X. mode
is cancelled.
Controlling CD Changer (Optional)
(CDM-7857/CDM-7854 only)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-7857/CDM-7854, you can control the
CD changer using the CDM-7857/CDM-7854.
NOTE
The CD controls on the CDM-7857/CDM-7854 for the
CD changer operation are functional only when the CD
Changer is interconnected with the CDM-7857/CDM7854.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTE
In case a 6-disc CD changer is connected (CDM-7857/
CDM-7854 only):
Press the "F" button to illuminate the "F" (CDM-7857),
"FUNC" (CDM-7854) indicator and go to step 1.
1
Scanning Programs
1
Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected (CDM-7857/
CDM-7854 only):
Press the "F" button to illuminate the "F" (CDM-7857),
"FUNC" (CDM-7854) indicator and go to step 1.
Press and hold the TITLE button for at least 3
seconds to scroll the information stored on the
disc.
After scrolling, the display returns to normal
mode.
NOTE
SCROLL: the display is scrolled only when a disc is
loaded or when a track is changed.
M.I.X. (Random Play)
1
In CD mode, press the TITLE button repeatedly
to display Disc Text or Track Text.
2
Press the SOURCE button to activate the
CHANGER mode.
The display shows the "Changer" (CDM-7857
only), disc number and track number.
Press the Disc Select buttons (1 trough 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the CDM-7857/CDM-7854 CD
player.
For details, please see the CD Player Operation
section.
• If the "F" (CDM-7857), "FUNC" (CDM-7854)
indicator is illuminated the Disc Select buttons
become nonfunctional.
11-EN
Information
In Case of Difficulty
If you encounter a problem, please review the items in
the following checklist. This guide will help you
isolate the problem if the unit is at fault. Otherwise,
make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not
operate with the vehicle's ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace
with the proper value if necessary.
• Internal micro-computer malfunctioned due to
interference noise etc.
- Press the Reset button with a ball-point pen or other
pointed article.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the
antenna may not be grounded and connected properly.
- Check your antenna connections; make sure the
antenna is properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken,
replace the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its
mounting location.
12-EN
CD
CD Player/Changer not functioning.
• Out of operating temperature range +50˚C (+120˚F)
for CD.
- Allow the vehicle's interior (or trunk) temperature to
cool.
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate
(about 1 hour).
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following
instructions in the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in
your unit can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
CD playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
• Mechanical error
- Press the c button. After the error indication
disappears, insert the disc again. If the abovementioned solution does not solve the problem,
consult your nearest ALPINE dealer.
Specifications
Indication for CD Changer
HI TEMP
–––H
(CDM-7857 only)
(CDM-7854 only)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
ERROR - 01
E - 01
(CDM-7857 only)
(CDM-7854 only)
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
NO MAGZN
––––
(CDM-7857 only)
(CDM-7854 only)
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
(CDM-7857 only)
T–––
(CDM-7854 only)
• No indicated disc.
- Choose another disc.
EEEE
(CDM-7854 only)
• Misconnection or disconnection of CD Changer.
- Check connection between CD Changer and control
unit.
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
87.7 – 107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
530 – 1,710 kHz
22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5 – 20,000 Hz (±1 dB)
Bleow measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
GENERAL
Power Requirement
14.4 V DC
(11–16 V allowable)
Maximum Power Output
40 W × 4
Maximum Pre-Output Voltage 2 V/10 k ohms
Bass
±14 dB at 30 Hz
Treble
±14 dB at 10 kHz
Weight
1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
155 mm (6-1/8")
NOSEPIECE SIZE
Width
Height
Depth
170 mm (6–3/4")
46 mm (1-13/16")
18 mm (11/16")
Due to continuous product improvement, specifications and
design are subject to change without notice.
13-EN
Installation and Connections
Before installing or connecting the unit, please
read the following and pages 2 and 3 of this
manual thoroughly for proper use.
Warning
USE ONLY VEHICLES WITH A 12 VOLT NEGATIVE (–)
GROUND.
Check with your dealer if you are not sure. Failure to do
so may result in fire or electric shock.
BEFORE WIRING, DISCONNECT THE CABLE FROM
THE NEGATIVE (–) BATTERY TERMINAL.
Caution
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY.
Use of other than designated parts may damage this unit
internally or may not securely install the unit in place as
parts that come loose may create hazards.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
A high incidence of moisture or dust that penetrates into
this unit may cause smoke or fire.
Failure to do so may result in electric shock or injury due
to electrical shorts.
Precautions
DO NOT CUT AWAY THE WIRE SHEATH AND USE
POWER FOR OTHER EQUIPMENT.
• Be sure to disconnect the cable from the (–) battery post
before installing your CDM-7857/CDM-7854/CDE7853. This will reduce any chance of damage to the unit
in case of a short-circuit.
• Be sure to connect the color coded leads according to
the diagram. Incorrect connections may cause the unit
to malfunction or damage to the vehicle’s electrical
system.
• When making connections to the vehicle’s electrical
system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads to
provide power for this unit. When connecting the
CDM-7857/CDM-7854/CDE-7853 to the fuse box,
make sure the fuse for the intended circuit of the CDM7857/CDM-7854/CDE-7853 has the appropriate
amperage. Failure to do so may result in damage to the
unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
• The CDM-7857/CDM-7854/CDE-7853 uses female
RCA-type jacks for connection to other units (e.g.
amplifier) having RCA connectors. You may need an
adaptor to connect other units. If so, please contact your
authorized ALPINE dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker
(–) terminal. Never connect left and right channel
speaker cables to each other or to the vehicle body.
Doing so may exceed the current carrying capacity of the
wire and result in fire or electric shock.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION OR CREATE
HAZARDS FOR VEHICLE OCCUPANTS.
Doing so may obstruct forward vision or hamper
movement.
DO NOT CONTACT, DAMAGE OR OBSTRUCT PIPES,
FLUID LINES OR WIRING WHEN DRILLING HOLES.
Failure to take such precautions may result in fire or cause
an accident or injuries.
DO NOT USE NUTS OR BOLTS IN THE BRAKE
SYSTEM WHEN MAKING INSTALLATION OR
GROUND CONNECTIONS.
Never use safety-related parts such as bolts or nuts in the
steering or brake systems or tanks to make wiring
installations or ground connections. Using such parts
could disable control of the vehicle and cause brake
failure, other accident or injury.
MAKE THE CORRECT CONNECTIONS.
Failure to do so may cause fire or accident to occur.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED.
Route the cables and wiring so as not to be crimped by
moving parts or make contact with sharp or pointed spots
which might damage the wiring. Failure to do so may
cause failure of unit or vehicle.
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special
technical skill and experience. To ensure safety, always
contact the dealer where you purchased this unit to have
the work done.
14-EN
IMPORTANT
Please record the serial number of your unit in the
space provided below and keep it as a permanent
record. The serial number plate is located on the
bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
3
Installation
1
Mounting Sleeve
(Included)
Dashboard
No Pressure Here
No Pressure Here
CDM-7857/CDM-7854/CDE-7853
Remove the Detachable Front Panel (refer to page
4). Slide mounting sleeve from main unit. (see
“Removal” on this page).
Slide the mounting sleeve into the dashboard.
NOTE
Please examine the installation. Make certain that no
external pressure is applied to either the top of the unit
or the removable nosepiece.
2
Screw
Hex Nut (M5)
∗∗
Metal
Mounting
Strap
Ground Lead
Lock Pin
Slide the CDM-7857/CDM-7854/CDE-7853 into the
dashboard. When the unit is in place, make sure the
locking pins are fully seated in the down position.
This can be done by pressing firmly in on the unit
while pushing the locking pin down with a small
screwdriver. This ensures that the unit is properly
locked and will not accidentally come out from the
dashboard. Install the Detachable Front Panel.
Removal
1 Remove the DETACHABLE FRONT PANEL.
2 Use a small screwdriver (or similar tool) to push
the locking pins to the "up" position (see above
drawing). As each pin is unlocked, gently pull out
on the unit to make sure it does not re-lock before
unlocking the second pin.
3 Pull the unit out, keeping it unlocked as you do
so.
<JAPANESE CAR>
Bolt Stud
∗
Face Plate
CDM-7857/CDM-7854/
CDE-7853
Chassis
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (∗) already
attached to the vehicle’s chassis.
NOTE
For the screw marked **, use an appropriate screw for
the chosen mounting location.
Connect each input lead coming from an amplifier or
equalizer to the corresponding output lead coming
from the left rear of the CDM-7857/CDM-7854/CDE7853. Connect all other leads of the CDM-7857/
CDM-7854/CDE-7853 according to details described
in the CONNECTlONS section.
Screws (M5 × 8)
(Included)
CDM-7857/CDM-7854/CDE-7853
Ground Lead
∗
Mounting Bracket
NOTE
Secure the ground lead of the unit to a clean metal spot
using a screw (∗) already attached to the vehicle's
chassis.
15-EN
Installation and Connections
Connections
Antenna
Blue
POWER ANT
2
REMOTE
TURN-ON
3
Blue/White
To power antenna
To amplifier or equalizer
(CDM-7857/CDM-7854 only)
IGNITION
4
Yellow
BATTERY
5
Black
GND
6
Red
7
Ignition Key
Battery
)
1
,
SPEAKER
RIGHT
FRONT
~
8
SPEAKER
RIGHT
REAR
SPEAKER
LEFT
REAR
SPEAKER
LEFT
FRONT
Gray
9
Gray/
Black
!
Violet/
Black
"
Violet
#
Green
$
Green/
Black
%
White/
Black
&
White
(
Speakers
Front right
Rear right
Rear left
Front left
Speakers
Front Left
+
Amplifier
Front Right
(CDM-7857 only)
+
Amplifier
Rear or Subwoofers∗
(CDM-7857/CDM-7854 only)
-
CD Changer
(Sold Separately)
(CDM-7857/CDM-7854 only)
∗ When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 5.
16-EN
1 Antenna Receptacle
& Left Front (–) Speaker Output Lead (White/Black)
2 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
( Left Front (+) Speaker Output Lead (White)
3 Remote Turn-On Lead (Blue/White) (CDM-7857/
CDM-7854 only)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
4 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's
fuse box or another unused power source which
provides (+)12V only when the ignition is turned on
or in the accessory position.
5 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the
vehicle's battery.
6 Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
) Front Output RCA Connectors (CDM-7857 only)
) Rear/Subwoofer RCA Connectors (CDM-7854
only)
RED is right and WHITE is left.
~ Rear/Subwoofer Output RCA Connectors (CDM7857 only)
RED is right and WHITE is left.
+ RCA Extension Cable (Sold Separately)
, DIN Connector (CDM-7857/CDM-7854 only)
Connect this to the DIN connector on the CD
Changer.
- DIN Extension Cable (Sold Separately)
NOTE
Older Alpine CD Changer came with standard, straight
type DIN connectors. In installations where an L-type
connector would simplify installation, the Alpine 491002
Adaptor can be used (Sold Separately).
7 Fuse Holder (15A)
8 Power Supply Connector
9 Right Front (+) Speaker Output Lead (Gray)
! Right Front (–) Speaker Output Lead (Gray/
Black)
" Right Rear (–) Speaker Output Lead (Violet/
Black)
# Right Rear (+) Speaker Output Lead (Violet)
$ Left Rear (+) Speaker Output Lead (Green)
% Left Rear (–) Speaker Output Lead (Green/
Black)
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries
various Alpine noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
17-EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising