Yealink SIP T26P IP Phone Quick Reference
Below you will find brief information for IP Phone SIP-T26P. The Yealink SIP-T26P is an enterprise IP phone that has a variety of features. It can be used for making calls, transferring calls, conferencing calls, and more. You can also check the status of your IP phone, including its IP address, MAC address, and firmware.
advertisement
If A and B are on a conversation and B may want A to transfer the call to C, three ways could be used to transfer the call: Blind Transfer, Attended Transfer, and Semi-Attended Transfer.
A press TRAN Button or Transfer softkey to put B on hold followed with dialing C and pressing the
Transfer softkey to call out.
A would be on hold and the LCD would display as Transferred. A could press the Cancel softkey button to be disconnected from the call.
If C picks up the phone call, B would be able to talk to C.
A press the TRAN button or Transfer softkey to put B on hold followed with dialing C and pressing the
OK or SEND button to call out.
While C is ringing, A hang up or press the Tran softkey. Then A will turn to the hold status, and the
LCD will display as Transferred
A will be disconnected from the call, when C pick up, B can talk to C
A press TRAN Button or Tran softkey to put B on hold followed with dialing Cand press the OK or SEND button to call out
After C answered it, A and C can have a private conversation without B, then A press the Tran button to complete the transfer
A will be disconnected from the call. B can talk to C
User can check the status of IP phone: IP address, MAC, Firmware,etc.
Call history are shown here:
You can download the latest user manuals from our website: http://www.yealink.com/en/download.asp?BigClassName=IP%20Phone
V60.0
Dial from Pool: In dial-up interface, press Pool hot key, use the navigation button to highlight your choice, enter into the corresponding option, choose a record, then press the SEND button to call out
Blinking red
set to BLF
It is inactive as BLF
There is incoming call to the account, or there is call on hold
There is incoming call to the device, or there is call on mute
Table 4 Line Keys set to BLF
It is inactive as BLF
Press the HOLD button or Hold softkey to put your active call on hold and then the corresponding line key will blink
If there is only one call on hold, press the Resume softkey or Hold button to retrieve the call
When the call is answered, press the CONF button, the conference call will now include you and the other two parties
advertisement
Key Features
- Call Transfer
- Call Forward
- BLF
- Conference
- Hold
- Call History
- Check IP Phone Status
- User Settings
Frequently Answers and Questions
How do I transfer a call?
How do I set up call forwarding?
How do I check the status of my IP phone?
Related manuals
advertisement