SVG140 Grill Drawer
Manual for Installation, Use and Maintenance
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : W :
Important Safety Information
This appliance must only be used for the purpose for which it is
intended, i.e. warming crockery and grilling food. Any other use could
be dangerous and may lead to premature failure of the appliance.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
User information:
• Grill drawers become hot during and immediately after use. Take
care not to touch any of the internal components.
• The drawer may become hot during operation.
• After use, please ensure that the switches are in the ‘Off’ position.
• Keep children away from the appliance when in use, and
immediately after use.
• Keep the drawer closed whilst grilling.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
CE Declarations of Conformity:
This appliance has been designed, constructed and marketed in
compliance with safety requirements of Directive 73/23/CEE modified
by directive 93/68/CEE for attribution of CE approval (Low voltage)
and requirements of EMC Directive 89/336/CEE modified by directive
93/68/CEE for attribution of CE approval.
At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a
reminder of the need to dispose of household appliances separately,
the product is marked with a crossed-out wheeled dustbin.
• Do not rest or sit on the drawer when open, as this will damage the
telescopic runners..
• The maximum capacity of the drawer is 15 kg.
•Do not cover the bottom of the drawer with aluminium foil or
other objects. Use only the supplied grill pan and trivet.
• Never pour water directly into the drawer.
• Do not use this appliance for heating liquids
• To avoid scratching, do not use sharp utensils in the drawer
• Use suitable containers or crockery.
• Residual condensation could eventually damage the grill drawer and
surrounding cabinets. It is advisable to dry any wet parts when the
drawer is cold.
• Do not store plastic or flammable objects in the drawer
• We recommend the use of oven gloves or adequate protection
when removing items from the drawer
• Never insert objects (e.g. screwdrivers, sharp objects, papers, etc.) in
the heating element and ventilation slots.
• Children should be supervised to ensure that they do not play with
the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision
Before First Use
Before using the drawer for the first time we recommend that you
Preheat the empty drawer for thirty minutes with the temperature
control at the six o’clock position. A slightly unpleasant smell may be
produced, caused by grease remaining on the heating element from
the production process.
• R
ead the user instructions carefully before using the oven for the
first time.
• Follow the instructions for first use.
• Clean the drawer regularly.
• Remove spills as soon as they occur.
• Always use oven gloves when removing shelves and trays from the
• Do not allow children near the drawer when in use.
• Do not allow fat or oils to build up on the grill pan or drawer base.
• Do not place any cooking utensils or plates directly on the drawer
• Always grill with the drawer closed.
• Do not grill food containing fat without using the grill pan grid.
• Do not cover the grill pan grid or the drawer walls with aluminium
• Do not perform maintenance or cleaning without first switching off
the electricity supply. If the drawer has recently been used, allow to
• Do not place hot metallic parts in water. Leave them to cool first.
• Do not allow vinegar, coffee, milk, saltwater, lemon or tomato
juice to remain in contact with metal parts.
• Do not leave the grill drawer unattended whilst in use.
• Do not use abrasive cleaners or powders that will scratch the
surface of the steel.
• Do not attempt to repair the internal workings of your grill
This drawer has been fitted with a cooling fan to achieve maximum
efficiency and to maintain low surface temperatures. The cooling fan
will switch on automatically when the drawer switches on. It is normal
for the cooling fan to run for an hour or more after use, depending on
the duration and temperature used.
If the drawer runners become damaged or do not work correctly
do not operate the grill drawer. Contact CDA Customer Care for
Using Your Grill Drawer
Temperature control
Timer control
A Plate warming
B Keeping food warm
E Medium high
GFull Power
Power indicator
When the drawer is closed, the power indicator is
visible on the front of the drawer to indicate the
drawer is switched on.
fig. 1
•Select the required cooking time
•Select the required temperature
•Close the drawer gently
Ensure that you turn both controls to the off position when cooking is
Setting the Temperature
•Turn the temperature control to the required position.
•Do not force the temperature control past the maximum position to
prevent damage to the thermostat.
•The symbols do not indicate absolute temperature values, but recommendations for control positions are shown in figure 1.
Setting The Cooking Time
The grill drawer is equipped with a timer which can be set for up to 30
•Turn the timer control to the required position. The timer will start
running and will sound an audible alert at the end of the countdown.
•Do not force the timer control past the 30 minute position to prevent
damage to the timer.
Please note:
•Always grill with the drawer closed.
•Do not grill for more than 30 minutes at a time.
•The grill can be preheated if required for two minutes prior to
placing food inside.
•Small amounts of steam may escape from the top of the drawer
front when the grill drawer is in use. This is normal and does not
constitute a fault.
•The grill drawer will only run when the drawer is closed.
With use, experience will demonstrate optimal cooking times and
temperature settings.
Care And Maintenance
Before cleaning or any service operation is started, the appliance
must be disconnected from the power supply.
If the drawer has been in use, let the drawer cavity and the
heating elements cool down before attempting any maintenance.
The drawer exterior and control panel
As the drawer has a stainless steel and glass surface, you should use
a nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch
the surface. Stainless steel can be effectively cleaned by simply using
a dilute solution of water and mild detergent and drying to a shine
with a clean cloth.
Proprietary stainless steel cleaners are available. We recommend the
CDA E-Cloth available from the CDA Sales Team for cleaning stainless
steel surfaces as this has been designed to prolong the finish of your
The drawer interior
The drawer should always be cleaned after use but only when it has
cooled down.
The interior should be cleaned using a mild detergent solution and
warm water. Proprietary chemical cleaners must not be used.
Abrasive cleaning agents or scouring pads/cloths should not be used.
•Steam cleaners must not be used
when cleaning this appliance.
•Once care and maintenance is
complete, ensure that all parts are
correctly replaced before using the
grill drawer.
The drawer can be removed to facilitate
- Pull out the drawer fully
- Open the drawer release levers,
positioned underneath the drawer
runners, as shown in figure 2.
- Carefully slide the drawer forwards to
remove it from the runners.
To replace the drawer, locate it on the
runners and push back into the housing.
Ensure that the drawer runners lock
into the drawer release levers. A `click’
sound signifies the drawer is locked to
the runners
Levers located under the
fig. 2
The grill drawer is not intended to be installed under a worktop and is
intended to be installed underneath a CDA compact appliance.
Do not install this product in locations where the top of the grill
drawer is within 25mm of a wooden supporting shelf.
Failure to allow adequate ventilation to the appliance may result in
overheating or damage to adjacent units and could invalidate the
This appliance is type X installation.
The walls of the kitchen units must be able to withstand temperatures
of 75˚C above ambient (typically this is between 90˚C and 100˚C).
When correctly installed ensure that there is a gap of 4mm minimum
between the sides of the grill drawer and adjacent furniture doors.
Lift the grill drawer carefully into position on the shelf, taking care
NOT to lift it by the door handle. When the drawer is open, there are
two screw holes visible, one on each side of the housing. The grill
drawer should then be secured to the housing by fitting screws into
these holes. Remember the housing should not be free standing but
be secured to the wall and/or adjacent fittings.
How to install your grill drawer
You will need the following housing
area to install your grill drawer correctly.
The grill drawer is designed to fit into
a cabinet of 600mm width with a
clearance between the sides and rear
of the grill drawer of 5mm or more.
The grill drawer should be built in,
but you must ensure that it is properly
ventilated as described below.
In the diagram shown in figure 4 an
open channel is shown at the rear
of the housing unit for ventilation
purposes; this is standard with most
housing units. The dimensions of
the rear channel should be 500mm x
25mm as a minimum.
Air Exhaust 25 min
560 (min)
Air Intake
fig. 4
The top of the unit should be open to allow air to escape and a free
air intake should be provided in the housing unit to allow a natural
flow of cooling air inside the unit. The dimensions of the air intake
are recommended as 500mm x 25mm (or 1250cm²).
The maximum weight of an appliance to be installed above the grill
drawer is 60kg.
Electricity Supply To Your Oven
Warning! this appliance must be earthed.
This appliance must be connected by a competent person, using
fixed wiring via a double pole switched fused spur outlet, protected
by a 13A fuse.
We recommend that the appliance is
connected by a qualified electrician,
who is a member of the N.I.C.E.I.C. and
who will comply with the I.E.E and local
regulations. The wires in the mains lead
are coloured in accordance with the
following code:
As the colours of the wires in the
mains lead for the appliance, may not
correspond with the coloured markings
identifying the terminals in your spur
box, proceed as follows:
1. The wire which is coloured green
and yellow must be connected to
the terminal marked E (Earth) or
coloured Green.
2.The wire which is coloured blue must be connected to the
terminal marked N (Neutral), or coloured Black.
3.The wire which is coloured brown must be connected to the
terminal marked L (Live), or coloured Red.
Please note:
The electricity supply should allow for the disconnection of the
appliance after installation. The isolator should be positioned within
2m of the appliance.
Please contact our Customer Care Department, or for Service on the details below.
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : W :