Little Wonder All 4-cycle Models Blower Owner Manual
advertisement
◉
Touch to zoom
LITTLE WONDER, Assembly Instructions or Pneumatic Wheel Kit (Нет #9020) For Use With All Little Wonder Blowers 7 - Figure 2. Parts List | Key Part | Figure 2. Number Number Description Quantity 1 900501 Front Axle Bolt 3/8-16x5 1/4 1 A 2 900401 Wheel Housing 1 3 934 10" Symmetrical Wheel 1 4 900404 Front Wheel Sleeve 1 WARNING 5 102B Lock Nut 3/8-16 Do Not Install Wheel 6 900405 Front Wheel Bracket Spacer 2 Kit While Blower Is 7 901001 Bracket Adapter 1 Running Assembly Instructions A) Tilt blower back on handle and remove front B) Install the pneumatic front wheel housing wheel and wheel housing. Study both figures onto the three studs and secure the three 1 and 2 showing the front panel of the leaf flange nuts. blower. If your blower front panel looks like С) Insert front wheel sleeve (Key 4) in wheel (Key3). figure 1, DO NOT use the bracket adapter D) Place one Wheel Bracket Spacer (Key 6) over (Key 7). If your blower front panel looks like each exposed end of the Wheel Sleeve. Install figure 2, place the bracket adapter (Key 7) in Wheel Housing (Key 2) with Front Axle onto the front panel first with the notched Bolt (Key 1). Secure with Lock Nut (Key 5). corner toward the left. 1028 Street Road * Phone (215) 357-5110 Fax (215) 357-8045 Specifications, descriptions, and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. P/N 900700 4/96
advertisement
Related manuals
Download
PDF
advertisement