- Vehicles & accessories
- Motor vehicle electronics
- Remote starters
- Code Alarm
- Ca 1053
- User manual
- 10 Pages
Code Alarm Ca 1053 Owner's Guide
Code Alarm CA 1053, a reliable vehicle security system, offers a comprehensive range of features to safeguard your vehicle and provide enhanced convenience. With its user-friendly design, you can effortlessly arm and disarm the system, ensuring your car remains protected.
The CA 1053 boasts several valuable capabilities. It features passive arming, which automatically arms the system after a specified time, ensuring your vehicle is always protected. Additionally, you can bypass the shock sensor when arming to prevent false alarms.
For added security, the hidden alarm function silences the siren during triggering, making it less noticeable to potential intruders. The personal protection alarm, activated by holding a button, provides an extra layer of safety in threatening situations.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
PROFESSIONAL
SERIES
ca 1053
Owner’s Guide
Vehicle Security and
Keyless Entry System
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
2012 Audiovox Electronics Corporation. All rights reserved.
1
2
Table of Contents
Using Your Remote Control ....................................................................3
Arming the Security System ..............................................................3
Passive Arming Bypass .....................................................................3
Bypassing the Shock Sensor ............................................................3
Hidden Alarm Function ......................................................................3
Disarming the Security System .........................................................3
Valet Mode ........................................................................................4
Manually Overriding the Security System .........................................4
Eliminating Arm/Disarm Notification Chirps .......................................4
Activating Trunk Release (optional) ...................................................4
Using the Car Finder Feature ............................................................4
Using the Personal Protection Alarm .................................................5
Car Jack Mode ..................................................................................5
LED and Siren/Horn Indications.............................................................6
Transmitter Button Functions ................................................................7
Replacing Remote Control Batteries .....................................................7
Warranty Information ..............................................................................8
ca1053 rev A.
Using Your Remote Control
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the button. The parking lights will flash 2 times, indicating the system is armed, has locked the doors
(if equipped and connected) and activated the starter disable feature. The LED status indicator will blink steadily, once per second.
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the system requires a second press of the button to activate an audible arming response from the vehicle.
Passive Arming Bypass
If passive arming is enabled on your system, while the system is disarmed, press
2 times within 5 seconds, the system will respond with 1 chirp and the LED will turn on. The security system will remain in this temporally bypassed state for as long as you wish. To exit passive bypass, press the or button and the system will return to normal status.
Bypassing The Shock Sensor
To arm the system and ignore the shock sensor press button, then within 5 seconds press + , the system will respond with 1 long chirp.
NOTE: The system will only change the shock sensor setting for one arm cycle and will be defaulted back to normal operation the next time the system is armed.
Hidden Alarm Function
Press the button first, within 3 seconds press the button to activate the hidden alarm function. The security system will arm with “Hidden Alarm Function” in which the siren / horn will be silenced if the system is triggered.
Disarming the Security System
To disarm the system press the button. The parking lights will flash 1 time, indicating the system is disarmed and has unlocked the doors (if equipped and connected).
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the system requires a second press of the button to activate an audible disarming response from the vehicle.
*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more than 2 seconds.
2012 Audiovox Electronics Corporation. All rights reserved.
3
4
Valet Mode
When valet mode is activated the status LED will light solid, and all security functions will be disabled. To enter or exit valet mode simply follow the 4 steps outlined below:
1. Turn the vehicle’s ignition ON.
2. Push and hold the programming/valet button.
3. The LED will turn on solid when valet mode is active
4. Release the programming/valet button.
Manually Overriding the Security System
Your system can be disarmed without the use of the transmitter. This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails. To by-pass the alarm system;
1. Open the vehicle door. The alarm will sound.
2. Turn the ignition key to the ON position.
3. Within 10 seconds, press and release the valet push button switch.
The alarm system will stop sounding and enter the (by-passed) mode. You can now start and operate the vehicle normally.
Eliminating Arm / Disarm Notification Chirps
System ARM/DISARM chirps can be toggled ON or OFF without entering the programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button 3 times. The system will respond with 1 chirp for ON or 2 chirps for OFF.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the button for 3 seconds will open the vehicle’s trunk or hatch.
Using the Progressive Car Finder Feature
Press the button to locate your vehicle. The system will sound 5 times at low volume.
ca1053 rev A.
Using the Personal Protection Alarm (Panic)
Press and hold the button for 3 seconds to activate the personal protection alarm.
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter’s and buttons can be used to lock and unlock the door (if the option is installed). To stop the alarm, press and hold the button on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds.
Car Jack Mode
This feature must be turned on in system programming, please consult your installing dealer.
Triggering Car Jack mode: While the ignition is ON and press and hold + for 2 seconds, the parking lights will flash 1 time and the system will act as follows;
1. 50 seconds after being triggered the siren will chirp for 15 seconds, during this 15 seconds you will be alerted to push the valet button to turn off Car Jack mode. If Car Jack mode is not turned off at this time it will advance to the next step.
2. Following the 15 second chirps (total time now 65 seconds) the siren will go into full sound and the parking lights will start flashing.
3. 90 seconds after trigger in, addition to the siren and parking lights, the system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS
STATE UNTIL THE BATTERY IS DEPLETED.
OVERRIDE THE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFF then On and press the valet button within 10 seconds.
2012 Audiovox Electronics Corporation. All rights reserved.
5
6
LED and Siren/Horn Indications
LED Display Indications
LED
OFF
SLOW FLASH
FAST FLASH
ON (SOLID)
2 FLASH... PAUSE
3 FLASH... PAUSE
4 FLASH... PAUSE
5 FLASH... PAUSE
Function
DISARMED
ARMED
PASSIVE ARMING
VALET MODE
ZONE 2 TRIGGER, HOOD/TRUNK
ZONE 3 TRIGGER, DOOR
ZONE 4 TRIGGER, SHOCK
ZONE 5 TRIGGER, IGNITION
Siren/Horn Indications
Chirps
1
2
3
4
5
Parking Light Flash Indications
Flashes
1
2
3
5
Function
DISARM
ARM
DOOR AJAR UPON ARMING
DISARM / TRIGGERED
CAR LOCATOR
Function
DISARM
ARM
DISARM / TRIGGERED
CAR LOCATOR ca1053 rev A.
Transmitter Button Functions
Lock
Unlock
Trunk
Car Finder
Panic
Shock Bypass
Passive Arming
Bypass
Arm with
Hidden Alarm
Function
Lock
X
X
X
X
X
X
X
Trunk Operation Method
Press and Release
X
Press and Release
Push and Hold (3 Sec)
X
Press and Release
Push and Hold (3 Sec)
Press and Release Lock then Press
Lock + Car Find (within 5 Sec)
Press 2 Times (within 5 Sec)
X
Press Trunk then Lock (within 5
Sec)
Replacing Remote Control Batteries
1-Way 4 Button Remote Control (part # CATX4)
The batteries (model CR2016) inside each remote control should last approximately 1 year under normal use. When the batteries become weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim. To replace the remote control batteries:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old batteries, observing the +/- symbols on the batteries and replace with new CR2016 batteries.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.
2012 Audiovox Electronics Corporation. All rights reserved.
7
LIMITED LIFETIME WARRANTY
Applies to Code Alarm Series Control Modules, Sirens, Sensors, and Relays.
Voxx Electronics Corporation (the Company) warrants to the original purchaser of this product that should this product or any part thereof, (other than transmitters) under normal use and conditions, be proven defective in material or workmanship during the lifetime of the vehicle, in which it was originally installed from the date of original purchase such defect(s) will be repaired or replaced with new or reconditioned product, (at the
Company’s option) without charge for parts or repair labor. A transmitter is warranted for
12 months from the date of original purchase.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. This Warranty is not transferable.
This Warranty does not cover damage to the vehicle’s electrical system or costs incurred for removal or reinstallation of the product. This Warranty does not cover batteries, broken LCD or OLED display screens, nor apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, abuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s).
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WAR-
RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL
BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
The company does not warrant that this product cannot be compromised or circumvented. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID
BY PURCHASER FOR THE PRODUCT WITHOUT COST OF INSTALLATION.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
8
Voxx Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 / 1-800-645-4994
128-9445 ca1053 rev A.
2012 Audiovox Electronics Corporation. All rights reserved.
9
Audiovox Electronics Corporation.
Customer Service 1-800-421-3209
WWW.CODE-ALARM.COM
10
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference that may cause undesired operation.
Warning!
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ca1053 rev A.
advertisement
Related manuals
advertisement
Table of contents
- 3 Using Your Remote Control
- 3 Arming the Security System
- 3 Passive Arming Bypass
- 3 Bypassing the Shock Sensor
- 3 Hidden Alarm Function
- 4 Valet Mode
- 4 Manually Overriding the Security System
- 4 Eliminating Arm/Disarm Notification Chirps
- 4 Using the Car Finder Feature
- 5 Using the Personal Protection Alarm
- 5 Car Jack Mode
- 6 LED and Siren/Horn Indications
- 7 Transmitter Button Functions
- 7 Replacing Remote Control Batteries
- 8 Warranty Information