Bosch | LTC 8850 Series | LTC 8x00 Series Allegiant Systems

CCTV | LTC 8x00 Series Allegiant Systems
LTC 8x00 Series
Allegiant Systems
• Models from 8 camera by 2
monitor to 32 camera by 6
monitor
• Compact single bay construction
• Integral alarm interface and signal
distribution
• Powerful alarm handling features
• Salvo switching and satellite
switch capability
• PC based software package
available
The LTC 8100 Series, LTC 8200 Series, and LTC 8300 Series
Allegiant video switcher/control systems combine both
switching and computer technology to provide powerful
performance and unique system features for the security user.
Offering full matrix switching capability, these systems can be
programmed to display the video from any camera on any
monitor, either manually or via independent automatic
switching sequences.
Functions
These systems provide from 8 camera inputs, 2 monitor
outputs to 32 camera inputs, 6 monitor outputs, 2 to 4
keyboards, 8 to 32 direct connect alarm input points, an
integral signal distribution unit, and a computer interface
port. A logging printer port is available in the LTC 8300 Series
systems.
These systems can be programmed with up to 60 sequences
which can be run independently of each other in either a
forward or reverse direction.
Security you can rely on.
Any of the sequences can utilize the SalvoSwitching capability
where any number of system monitors may be selected to
switch as a group. Using the optional LTC 8059/00 Master
Control Software package or the LTC 8850/00 Bosch
Graphical User Interface (GUI) Allegiant Server, sequences
can be made to activate and deactivate automatically based
upon the time of day and the day of week.
Utilizing the unit's integral signal distribution ports,
connections to on-site receiver/drivers are easily made.
On-site receiver/drivers provide operator control of pan, tilt,
zoom, multiple pre-positions, four auxiliaries, auto-pan, and
random scan. These systems also support variable speed
operation and full programming functions of AutoDome
series dome cameras.
When combined with an LTC 8016 Allegiant Bilinx Data
Interface unit, these switcher/controllers support operations
using Bilinx communication. With Bilinx, PTZ control is
accomplished using a bidirectional communication protocol
embedded in the video signal of Bosch Dinion and AutoDome
CCTV cameras. In addition, Bilinx uses the standard video
cable to transmit alarm and status messages from the cameras,
providing superior performance without the need for separate
data transmission cables.
2 | LTC 8x00 Series Allegiant Systems
With their built-in alarm interface capability, an external
contact closure or logic level can be used to automatically
activate any camera to be displayed. Any monitor or group of
monitors can be set to display cameras under alarm
conditions.
The base system contains three built in alarm response modes:
basic, auto-build, and sequence and display. In addition to
these three modes, the PC based software packages offer
VersAlarm a new dimension in alarm handling. VersAlarm has
the ability to combine any or all of the three standard modes
within the same system. Alarm video may be selected to reset
either manually or automatically. In addition, a 16-character
alarm title can be selected to appear instead of the camera title
during alarm conditions.
System operation and programming is accomplished using a
full function, ergonomically designed keyboard (sold
separately). Built-in operator priority levels and the ability to
restrict certain operators from controlling designated
functions provide maximum flexibility.
These systems include a black outlined 48-character on-screen
display for time-date, camera number, camera ID
(16-characters), an icon to identify controllable cameras, and
monitor (12-characters) or status information. Over 235
characters are available when programming camera ID and
monitor titles.
Utilizing a standard IBM* compatible PC and the optional
LTC 8059/00 Master Control Software package or
LTC 8850/00 GUI software, enhanced programming and
switching features can be obtained. A user-friendly
spreadsheet format provides the ability to enter camera titles,
operator names, 64 timed events, change system parameters,
program camera sequences, install lockouts, and access the
advanced VersAlarm alarm handling screens with speed and
efficiency.
The programmed information may then be transferred into
the Allegiant system, stored on disk, or printed out directly
from a printer connected to the PC.
The LTC 8850/00 Bosch GUI software is designed around an
intuitive graphic based interface. The GUI provides high
performance programming, control and monitoring of all
system functions by using on-screen icons to reflect real time
status of the devices controlled by the system.
The LTC 8850/00 GUI software also provides the ability to
monitor system status events. System alarms, switching
functions, sequence events, keyboard actions, and video loss
information can be viewed in real time on the PC screen and,
if desired, logged to the PC hard drive.
The software also provides the ability to enable an on-screen
indicator for easy identification of controllable cameras.
The LTC 8300 Series contain a logging printer output port
which accepts a standard RS-232 serial printer. This provides a
permanent record of system status showing time and date of
changes such as: incoming alarms, acknowledgment of
alarms, loading of sequences, user log-on to keyboard, transfer
of system tables and sequences, video loss messages, and a
power up reset message. In addition, the printer can be used to
obtain a hard copy of the system's configuration tables and
sequences.
These systems provide powerful macro capabilities. The
macros can be activated using LTC 8554 Series and LTC 8555
Series type keyboards, system time event functions, alarm
activations, and via special function icons in the LTC 8850/00
GUI software.
These systems can serve as the master switcher in a
SatelliteSwitch configuration. This innovative SatelliteSwitch
feature enables a single system to communicate with remotely
located "Satellite" systems. Any Allegiant system or
LTC 5112 Series and LTC 5124 Series programmable
sequential switcher can serve as a remote Satellite switcher.
This powerful feature permits the design of a distributed
matrix video switching system with control at one central
location and individual control at the local sites. The main
control site can view/control local cameras plus cameras
located at any of the remotely distributed Satellite sites. The
Satellite sites can view/control only cameras associated with
their own site.
When used in this type of configuration, the main system can
access up to 256 cameras located anywhere in the system.
Windows is a registered trademark of Microsoft Corp.
LTC 8x00 Series Allegiant Systems | 3
Installation/Configuration Notes
Y
X
LTC 8300 Series
Main CPU Bay
Z
[
\
Monitor 1
Monitor 2
Monitor 3
Monitor 4
Monitor 5
Monitor 6
BO SCH
Prod
BO SCH
Mon
Prod
Shot
Clr
Mon
Shot
Clr
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
0
]
Typical LTC 8300 Series Configuration Diagram
1
Additional System Cameras
2
Up to 32 Video Inputs Maximum
3
3 m (10Ft) Interconnect cable supplied with Keyboard
4
Video Coax
5
Up to 6 Monitor Outputs
6
Maximum of 4 Allegiant Series Full Function Keyboards up to 1.5
km (5000Ft) away using optional remote hookup Kit
4 | LTC 8x00 Series Allegiant Systems
4
1
AutoDome®
5
3
2
6
7
8
9
2
10
11
12
13
15
2
14
18
16
17
15
19
20
21
Monitor 1
Monitor 2
Monitor 3
Monitor 4
Monitor 5
Monitor 6
BO SCH
Prod
BO SCH
Mon
Prod
Shot
Clr
Mon
Shot
Clr
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
0
22
LTC 8300 Series Full Capacity Configuration Diagram
(32 Cameras by 6 Monitors)
01
02
Typical Autodome Camera
Video Coax
12
13
Additional
Main CPU Bay
Twisted-Pair Typical
14
4 Separate Outputs
32 Separate Alarm Inputs
15
RS-232 Data
Low Logic Level
09
10
3m (10ft) Interface Cable
provided
Package
6 pairs of relay outputs
17
LTC 8300 Series
Main CPU Bay
07
Pan & tilt
18
Serial Logging
Printer Capability
Up to 32 Receiver/Driver
20
3m (10ft) Interconnect
Units
Cable Supplied with Keyboard
Up to 1,5 km (5000ft) Using 21
Up to 6
18 AWG Shielded Twisted
Monitor Outputs
Pair Cable (Belden 8786 or
Equivalent)
with Optional Software
06
3 m (10ft) Interface cable
Up to 32 Receiver/Driver
04
16
19
provided with LTC 8500/50
03
Contact Closure or Active
Receiver/Driver
System Cameras
Units
05
08
11
Optional LTC 8059/00
22
Maximum of four Allegiant
Master Control Software
Series
or LTC 8850/00 Graphical
Full Function Keyboards up to
User Interface (GUI)
1.5km (5000ft)
Software Package can be
away using optional Remote
Run on Windows®
Hookup Kit
based PC.
LTC 8x00 Series Allegiant Systems | 5
1
2
BOSCH
BOSCH
3
2
BOSCH
4
BOSCH
2
BOSCH
5
6
7
BOSCH
Prod
Mon
Shot
Clr
1
2
3
4
5
6
7
8
9
0
9
8
11
10
12
13
2
BOSCH
14
2
BOSCH
BOSCH
15
BOSCH
2
BOSCH
5
6
16
BOSCH
Prod
7
Mon
Shot
Clr
1
2
3
4
5
6
7
8
9
18
0
17
19
20
Typical Main Allegiant Control Center
01
Typical System Monitors
11
(Local and/or Remote Video)
02
03
Video
Typical Fixed Cameras
Incoming Video TRUNK Lines
06
From All Satellite Sites
12
13
05
Typical Alarm Input Contact to 14
Biphase Data
17
IntuiKey Keyboard (P/T/Z
Allegiant System
07
Biphase Data Lines to All
Local P/T/Z Camera Sites
(Local Video Only)
04
16
LTC 8200, or LTC 8300
Typical Allegiant Satellite Site
Typical Local Monitors
Typical LTC 8100,
Control of Local Cameras
Only)
Typical Fixed Cameras
Activate Local or Satellite
08
Typical IntuiKey Keyboard
Cameras
09
Biphase Control and Satellite 19
Typical Controllable Camera
15
LTC 8780 Data Converter
LTC 8569 Code Merger
Switching Data
Typical Alarm Input Contact
(For Local Alarms Only)
18
10
1 Biphase Data Line to Each 20
Biphase Control + Satellite
Remote Satellite Site
Data
6 | LTC 8x00 Series Allegiant Systems
Technical Specifications
System Capacities
Model
No.
Electrical - LTC8100, LTC8200, LTC8300 Series Bay
Model No.
LTC 8100
LTC 8200
LTC 8300
Series
Series
Series
8
16
32
Video Inputs-Standard
Video Inputs-Looping
8
16
32
Video Inputs-Satellite
256
256
256
Video Outputs
2
5
6
Alarm Inputs
8
16
32
Alarm Outputs
2
5
6
Bi-phase Outputs
8
12
16
Keyboards
2
4
4
RS-232 Ports-Console
1
1
1
RS-232 Ports-Printer
0
0
1
Receiver/Drivers-
8
16
32
256
256
256
Standard
Rated
Voltage
Voltage
Range
Nominal
LTC 8100/50
230 Vac
50/60 Hz
195.5 to 253
10 W
LTC 8100/60
120 Vac
50/60 Hz
108 to 132
10 W
LTC 8200/50
230-240 Vac
50/60 Hz
195.5 to 253
10 W
LTC 8200/60
120 Vac
50/60 Hz
108 to 132
10 W
LTC 8300/50
230-240 Vac
50/60 Hz
195.5 to 253
10 W
LTC 8300/60
120 Vac
50/60 Hz
108 to 132
10 W
Power1
1. Power at rated voltage fully loaded.
Connectors:
Receiver/Drivers-Satellite
Video Inputs and
BNC.
Monitor Outputs
Electrical
Looping Video Connections:
Input Voltage Level
Gain
0.5 Vp-p to 2 Vp-p
LTC8100 Series
8 BNC.
(Composite Negative Sync).
LTC8200 Series
One 34-pin ribbon connector used in
Unity ± 2%
conjunction with the LTC 8808/00 video
(75 ohm terminated).
interconnect panel (not included).
Pulse/Bar Ratio
1 94% to 106%.
2T Pulse K Factor
2.5% maximum. 1
LTC8300 Series
Two 34-pin ribbon connectors used in
conjunction with the LTC 8808/00 video
interconnect panel (not included).
Bar Amplitude
1 96% to 104%.
External Accessory Interfaces:
Field Time Waveform Distortion
1-2% maximum.
CONSOLE
Line Time Waveform Distortion
1 1% maximum.
Short Time Waveform Distortion
maximum.
Video Bandwidth (-3 dB)
25 MHz.
Frequency Response
± 1.0 dB to 12 MHz.
connectors. Relay outputs provide alarm
1 60 dB at 3.58 MHz
output connections. (Contact rating =
Signal-to-Noise
RS-232 port for external PC or control
interface (Default = 19,200 baud).9-pin
D-type connector.
ALARMS
Unweighted minimum.
Crosstalk (Typical at 3.58 MHz)
Inputs use removable screw terminal
1.5A at 30 VDC).
PRINTER
RS-232 port for system logging printer
(Default = 19,200 baud).9-pin D-type
Adjacent Channel
-55 dB.
(LTC8300 Series only)
Differential Gain
2% maximum. 1
Connector
Differential Phase
1.3° maximum 1
BI-PHASE OUT
Chrominance Luminance Gain
1 96% to 104%.
connections when used in daisy chain
Chrominance Nonlinear Phase
1.2° maximum.
configuration. Removable screw terminal
connector blocks.
Luminance Nonlinearity
4% maximum.
Switching:
Crosspoint matrix.
DC Output
0 V.
1
1. Meets EIA/TIA - 250C Medium Haul Standard.
Environmental
Temperature:
Operating
+4 °C to +55 °C (+40 °F to +131 °F).
Storage
-40 °C to +60 °C (-40 °F to +140 °F).
Altitude
4500 m (15,000 ft).
Humidity
0% to 95% relative, noncondensing.
KEYBOARDS
Multiple ports provide receiver/driver
6-pin RS-485 ports for Allegiant
keyboard use.
LTC 8x00 Series Allegiant Systems | 7
Mechanical
Construction
Finish
Ordering Information
Steel chassis with sheet metal cover and
Model & Description
plastic bezel.
LTC 8100/50
Charcoal.
LTC8100, LTC8200
440 W x 305 D x 40 H mm
Series
(17.3 x 12 x 1.7 in).
LTC8300 Series
440 W x 305 D x 89 H mm
Rack Mount (Integral)
4 kg (8.8 lb).
LTC 8300/50
4.8 kg (10.7 lb).
LTC 8300/60
Allegiant 8200, 115120 Vac
Allegiant 8300, 230 Vac, 16 bi-phase outputs
Brackets for mounting one unit in an EIA
19-inch rack.
LTC8100, LTC8200
One standard rack unit high.
Series
LTC8300 Series
Two standard rack units high.
Electromagnetic Compatibility
EMC Requirements
CE Immunity, CE Emission Class B,
FCC Class B, ICES-003.
Safety
Allegiant 8200, 230 Vac
LTC 8200/60
Series
LTC8300 Series
Allegiant 8100, 115 Vac
LTC 8200/50
(17.3 x 12 x3.5 in).
Weight:
LTC8100, LTC8200
Allegiant 8100, 230 Vac
LTC 8100/60
Dimensions:
CE, UL, cUL.
Allegiant Accessories
The Allegiant accessory products provide many optional features to
the base Allegiant switching systems. Accessory products include
keyboards, keyboard extension kits, receiver/driver units, switcher/
followers, and code merger units. All accessory products are
designed to be installer-friendly and compatible throughout the
Allegiant series systems. See Allegiant accessories data sheet.
Allegiant 8300, 115 Vac
8 | LTC 8x00 Series Allegiant Systems
Americas:
Bosch Security Systems
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone:+1 (0) 585 223 4060
Fax:+1 (0) 585 223 9180
security.sales@us.bosch.com
http://www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone:+31 (0) 40 27 83955
Fax:+31 (0) 40 27 86668
emea.securitysystems@bosch.com
http://www.boschsecurity.com
Data subject to change without notice | Printed in The Netherlands | 22. Jun 2005
Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone:+65 6319 3450
Fax:+65 6319 3499
apr.securitysystems@bosch.com
http://www.boschsecurity.com
Download PDF