PROFI-5060 spec eng
PROFIBUS Remote I/O Module
PROFI-5060
The PROFI-5060 is one of the PROFIBUS DP series products produced by ICP DAS. It provides the
PROFIBUS DP communication protocol with any DP-Masters. The PROFI-5060 provides ±4KV ESD
protection contacting for all terminals (include I/O Terminals and PROFIBUS connector). By applying
the PROFI-5060, users can easily establish a PROFIBUS DP network with other DP-Masters. In
advance, it can be used in the application of building automation, remote data acquisition,
environment control and monitoring, laboratory equipment & research, factory automation, etc..
Pin Assignments
Support for PROFIBUS DP-V0 protocol
Detect transmission rate automatically(Max. 12Mbps)
Address 0~99 set by rotary switches
Network Isolation Protection
3000VDC isolation protection on PROFIBUS side
4KV ESD Protection (contact for any terminal).
Wide range of power input (DC 10~40 VDC) and
operating temperature (-25°C~+75°C)
Design Flowchart
1-25
Hardware
ESD Protection
4 kV class A
PROFIBUS Interface
Controller
Transceiver
Connector
Baud Rate (bps)
Transmission Distance (m)
Isolation
Protocol
Profichip VPCLS2
ADI ADM2486
9-pin female D-Sub
9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
DP-V0
LED
Round LED
PWR LED, RUN LED
Power
Power supply
Protection
Power Consumption
Unregulated +10 ~ +40 VDC
Reverse polarity protection, Over-voltage brown-out protection
1W
I/O
4 Channels (Form C)
Contact Rating: [email protected], [email protected]
Operating Time: 3ms. Release Time: 2ms. (Typical)
Minimum Life: 500,000 Ops.
8 Channels (Sink or Source), Isolated from each other
Off Voltage Level: +1V Max. On Voltage Level: +4 ~ +30V
Input Impedance: 3KΩ in series with opto-coupler
Isolation Voltage: 3750Vrms
Digital Output
Digital Input
Mechanism
Installation
Dimensions
DIN-Rail
91 mm x 128 mm x 52 mm (W x L x H)
Environment
-25 ~ 75℃
-30 ~ 85℃
5 ~ 95% RH, non-condensing
Operating Temp.
Storage Temp.
Humidity
Application
Ordering Information
PROFI-5060 CR
PROFIBUS Remote I/O Module
(8-channel Isolated Digital Input and 4-channel Relay Output)
1-26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement