Spec Sheet - Electromate

Spec Sheet - Electromate
®
EA S Y E M BE DDE D SOLUTIONS SINC E 1983
Product Catalog • Vol. 1
1.888.411.7228 • www.rabbit.com
TABLE OF CONTENTS
02 Corporate Overview
06 Applications
10 Dynamic C® Software
12 Rabbit® 4000 Product Family
13 RabbitCore® Modules
16 Rabbit® 3000 Product Family
17 RabbitCore® Modules
20 Single-Board Computers
23 Single-Board Computers
24 Smart Star™ System
22 Rabbit® 2000 Product Family
26 Operator Interfaces
27 OP7200
27 OP7100
27 OP6800
28 Application Kits
29 29 29 30 30 Rabbit RIO® Programmable I/O
Wireless 802.15.4
Bluetooth®
Wireless Control
Camera Interface
31 31 31 32 32 Embedded PLC
Multi-Port Serial-to-Ethernet
Color Touchscreen
Secure Embedded Web
GPRS/GSM
34 Selection Guide
34
36
36
38
RabbitCore® Modules
Single-Board Computers
Operator Interfaces
Smart Star™ System 39 Glossary
CORPORATE OVERVIEW
CORPOR ATE OVER VIE W
The Rabbit Solution
Rabbit , a worldwide manufacturer of low-cost embedded solutions, was founded
in 1983 and acquired by Digi International® in 2005. Our mission is to develop
silicon, boards and software to bring intelligent real-time control to existing
applications, and enable completely new applications.
Designing Software with Confidence
Developing real-time software can
challenge engineering teams and put
project schedules at risk. Rabbit was
founded on the principle of delivering
a software environment for fast
development. That is why Rabbit
pioneered the Dynamic C integrated
development environment, which
implements extensions to the
C programming language to make
real-time software design faster, more
intuitive and easier to debug. We are
dedicated to constant additions to
Dynamic C tools, such as improved
memory handling, increased web
security, enhanced web serving
capability, solid networking
infrastructure, and a greater diversity
of sample programs. These new
functions and tools help our customers
manage the development process to
meet their schedule and cost goals.
2 | rabbit.com
CORPORATE OVERVIEW
Integrating Software with Known Good Hardware
When design teams complete the initial phase of software development, the
work begins to debug the software and integrate sub-systems. Rabbit offers
a complete set of development kits that include the target hardware you
need for your design. You get known good hardware to debug software in
real time and test it with other systems before committing to the final
product. Once the design is completed and tested, our customers go into
production using the same hardware upon which they tested their design.
Design risk is minimized, as is the development time.
Path To Success
Step 1
Step 2
Step 3
Design Software
and Debug on
Known Good
Hardware
Finalize
Design and
Integrate
into System
Go into Production
Using the Same Known
Good Hardware
We offer different levels of integration, from chips to rack-mounted
modular systems, giving our customers a choice of how best to adopt the
technology. This complete spectrum of reliable, cost-effective, proven
hardware reduces development time and system redesign, keeping our
customers’ projects on schedule.
From Processor to
Rack Mounted Systems
PRODUCT CATALOG | 3
CORPORATE OVERVIEW
Getting Acquainted with the Technology
Rabbit customers include companies experienced with our products as
well as newcomers looking for a faster, lower-risk path to get through new
product development. For the latter set of customers, we offer an array of
application kits to introduce new types of technologies, such as ZigBee® and
Wi-Fi,® or different types of applications, such as a security or I/O expansion.
Each kit comes with hardware, development software and accessories,
plus sample programs to teach the new technology for faster application
development. We also offer extensive technical support via telephone or
email, as well as datasheets, manuals, white papers, technical notes and
software downloads on our website.
Wireless 802.15.4
Application Kit
4 | rabbit.com
CORPORATE OVERVIEW
Take the Next Step
We Are Here to Help
If you would like Rabbit to support your real-time control and
communications projects, or if you just want to know more about how
our products can be used, please contact the Rabbit sales team.
Rabbit sales representatives will talk with you to understand your design
needs, and if we think we have a potential solution, we will offer you
guidance to find the lowest-cost product to fit your requirements. If you
need additional insight from our technical support group, a discussion can
be arranged so that you feel confident you are on the right path.
www.rabbit.com/contact.shtml
[email protected]
1.888.411.RABT (7228)
PRODUCT CATALOG | 5
APPLICATIONS
R abbit Users Tell Our S tory
Tales of Innovation
In 1983, Rabbit recognized that embedded systems design could be made faster,
easier and far more accessible to people who were not trained as computer architects.
Rabbit focused on the challenge of writing software for real-time applications and
providing the tools to make it work reliably. Out of this challenge was born the
Dynamic C integrated development environment, which offered extensions to the
C language to reduce the time to develop code and the effort to debug it.
Rabbit introduced the popular
line of single-board computers
and RabbitCore modules, which
unified processor, memory and
connectivity into a solder-free form
factor. Customers found that they
could easily design board-level
products and then add the
RabbitCore modules. This allowed
companies to focus on their
expertise and leverage Rabbit’s
capabilities to reduce engineering
costs and maintain schedules.
The ease of integration, low cost
and connectivity options gave
customers the ability to expand
the opportunities of monitoring
and control.
6 | rabbit.com
APPLICATIONS
Palladium Technologies chose Dynamic C and the Rabbit 2000 based
SR9000 Smart Star expansion system for their marine product, SiMON. This
monitoring and control product consolidates complex information systems
on marine vessels into a concise, usable format.
Mike Blake, president of Palladium Technologies compared
SiMON to an “artificial intelligence” computer that assists in
the maintenance and control of the ship’s around-the-clock
functions. The “non-stop” engineer helps provide a safe
environment by monitoring the ship’s most critical systems.
“We are happy to
have made the radical but correct decision both then and now
in choosing Rabbit products.”
Thousands of sensors are spread throughout the ship,
leaving no system unmonitored. These sensors keep track
of engine operation, electrical generators, water levels, air,
-Mike Blake, president of Palladium Technologies
sewage, and other critical components. The sensors are
connected to Smart Star controller units that are located
throughout the vessel. Ten to twenty controllers connected
via an Ethernet backbone are installed in a typical mega yacht application.
“We are happy to have made the radical but correct decision both then and
now in choosing Rabbit products,” said Blake.
© Palladium Technologies
PRODUCT CATALOG | 7
APPLICATIONS
Sunset Dynamics, an embedded design consulting firm, saw the potential
of Rabbit products when the company embarked on a project that required
hoisting performers into the air timed along with music. The theatrical
acrobatic show required reliable and easy-to-integrate equipment – and the
equipment needed to be much smaller than the PC previously used.
“The established code
base included with
Dynamic C allowed
very rapid software
development.”
-Ryan Neimi,
Sunset Dynamics
Initial designs of this system consisted of PCs next to each
winching system suspended in the ceiling. The cost, size
and functionality of the PCs became a prohibitive factor.
Ryan Neimi of Sunset Dynamics decided to move to a PLC
design. While the PLC met the custom control, cost and
size requirements, it lacked the accuracy and real-time
control that the application demanded. The company chose
Rabbit’s BL2600, a cost-effective single-board computer in
a small, complete package that met the application’s
accuracy and real-time control requirements.
“We selected the Rabbit 3000 based BL2600 single-board and Dynamic C,”
said Neimi. “Compared with brewing up our own motion control board and
producing the firmware from scratch, the established code base included with
Dynamic C allowed very rapid software development.”
Theatrical Performance Stage
BL2600
Single-Board
Computer
Desktop
Computer
8 | rabbit.com
Motion Control
Winches
Harness
APPLICATIONS
With Digi International’s acquisition of Rabbit in 2005, Rabbit embarked
on an exciting path to integrate features on-chip as well as new
technologies including Wi-Fi and ZigBee. In 2006, Rabbit released the next
generation Rabbit 4000 microprocessor chip with integrated Ethernet. The
Rabbit 4000 opened the door to an offering of products that takes
embedded development to the next level.
The Rabbit 4000 family gives customers the flexibility to integrate more
features into their embedded design. Pin-compatibility in the RabbitCore
series enables quick migration for your design by just plugging in another
core. The Rabbit 4000 family has proven to be ideal for designs requiring
robust Ethernet, larger memory support or new wireless technologies
such as Wi-Fi or ZigBee.
Companies such as Palladium Technologies and Sunset Dynamics envisioned
the opportunities and the extreme value that Rabbit offers. Rabbit is
committed to being at the forefront of new technologies, while maintaining
the ease of integration. As we continue to improve, we hope that you may
someday be part of the Rabbit family and help tell our story.
More Customer Success Stories at www.rabbit.com/story
PRODUCT CATALOG | 9
DYNAMIC C® SOFTWARE
Integrated Development Environment
Dynamic C® Software
Rabbit’s Dynamic C integrated development environment makes it easy to write real-time
software for embedded systems that use a Rabbit microprocessor. It has all the
traditional elements of C, plus enhancements that make developing easy and reliable.
Development Couldn’t Be Easier
The Dynamic C software plus Rabbit
hardware support fast development
of low-cost intelligent devices that
perform a wide range of functions.
These functions include switching
motors on and off, actuating
valves, controlling displays,
keyboard controls and making
telephone calls.
10 | rabbit.com
DYNAMIC C® SOFTWARE
Dynamic C®
You can design real-time embedded systems with enormous
flexibility to connect to other systems via a local area
network or the Internet. This provides the ability to
send emails, serve web pages, accept commands, report
exceptions or raise alarms, just to name a few examples.
It’s easy to get started. Simply connect one of Rabbit’s development kits to
your computer using serial or USB connection. Dynamic C supports device
connection to systems via wired or wireless Ethernet, RS-232 and ZigBee.
Over 700 sample programs, a variety of supplied routines and hardware
drivers will get you up and running, allowing real-time system development
in a matter of minutes. Debugging is easy with Dynamic C’s built-in editor. No
in-circuit emulator or analyzer is needed.
Customizing the Dynamic C Development Environment
The software modules bundled with Dynamic C make it possible to
customize your programming needs quickly and easily. Use only what you
need to configure your development environment.
FAT File System
Popular, network-accessible file
system for flash memories.
Point-to-Point Protocol (PPP)
TCP/IP functionality for serial and
PPPoE connections.
Library Encryption Executable
Program to encrypt Dynamic C
library source files.
RabbitWeb™
System of HTML tags used to easily
create web interfaces to monitor and
control embedded applications.
μC/OS-II Real-Time Kernel
Real-time preemptive, prioritized
operating system.
Modbus TCP
Ethernet variant of the standard
communication protocol in
industrial automation systems.
Simple Network Management
Protocol (SNMP)
Management software for networked
devices.
Rabbit’s Dynamic C is royalty-free. You can develop your product and go
into production with no further licensing or paperwork.
Dynamic C Add-on Module
If you need encryption for your
application, you can also add a
low-cost module to develop with
SSL/TLS and AES.
Advanced Encryption Standard (AES)
128-bit encryption for transfer of sensitive data.
AES
Secure Sockets Layer (SSL)/Transport Layer Security (TLS)
Industry standard web security for embedded applications.
SSL
PRODUCT CATALOG | 11
RABBIT® 4000
PERFORMANCE • ON - BOARD E THERNE T • PIN COMPATIBILIT Y
Rabbit® 4000 Product Family
The Rabbit 4000 family of scalable products delivers reliable, easy-to-integrate
embedded solutions with both wired and wireless connectivity.
Flexible Connectivity
Rabbit 4000 products deliver a
wide range of functionality and
connectivity options to reduce
engineering effort and speed
your development with less
risk. Use technologies such as
Ethernet, ZigBee and Wi-Fi
to network subsystems and
expand application.
ICON LEGEND
4
12 | NEMA
rabbit.com
RoHS
Analog
Ethernet
Wireless
miniSD
RABBIT® 4000 • RABBITCORES
Rabbit 4000 RabbitCore® Line | Rabbit delivers reliable core modules that make it easy to
integrate new features and new industry-standard functions. Rabbit 4000 microprocessor based core
modules give you a low-risk path for integrating Ethernet, Wi-Fi and ZigBee into your embedded
designs while keeping development on schedule.
Rabbit helps reduce engineering effort by offering development kits with all the tools you need to
design embedded solutions. These kits include a core module, prototyping board, accessories and our
Dynamic C® integrated development environment.
RCM4510W RabbitCore® Module
Easily implement a wireless mesh network as part of your control solution.
• On-board ZigBee/802.15.4 wireless connectivity
• Rabbit 4000 running up to 29.49 MHz
• 512K flash memory/512K data SRAM
• Up to 40 configurable GPIO
• 1.84” × 2.85” × 0.54” (47 mm × 72 mm × 14 mm)
RCM4400W RabbitCore® Module
Use industry-standard wireless networking to create a low-cost, low-power,
Wi-Fi based control and communications solution.
• Integrated Wi-Fi/802.11b wireless connectivity
• Serial-to-Wi-Fi bridge capability
• Rabbit 4000 running up to 58.98 MHz
• 512K flash memory, 512K data SRAM, 512K fast
program-execution SRAM
• Up to 35 configurable GPIO
• Low-power modes down to 2 kHz
• 1.84” × 2.85” × 0.50” (47 mm × 72 mm × 13 mm)
PRODUCT CATALOG | 13
RABBIT® 4000 • RABBITCORES
RCM4300 RabbitCore® Series
Mass storage support with the hot-swappable, industry-standard miniSD™
memory cards, plus memory to support algorithmic-intensive applications
such as graphics and encryption.
• Capability to add up to 1 GB miniSD memory card
• Rabbit 4000 running up to 59.98 MHz
• 8-channel 12-bit ADC
• 512K battery-backed SRAM, 1 MB fast program execution SRAM
• 1 MB to 2 MB flash memory
• 1.84” × 2.85” × 0.84” (47 mm × 72 mm × 21 mm)
RCM4200 RabbitCore® Series
Ideal for embedded applications needing 10/100Base-T Ethernet
connectivity. There is also an option for on-board 12-bit analog channels.
• Rabbit 4000 running up to 58.98 MHz
• 10/100Base-T Ethernet, RJ-45 jack
• 4 MB or 8 MB serial flash for mass data storage
• 512K flash memory/512K SRAM
• Up to 35 GPIO with multi-layer alternate pin functions
• Synchronized PWM channels with 16-bit counter
• 1.84” × 2.42” × 0.84” (47 mm × 61 mm × 21 mm)
RCM4100 RabbitCore® Series
Delivers serial ports without the cost of Ethernet for embedded control
applications needing a small module.
• Rabbit 4000 running up to 58.98 MHz
• Up to 40 GPIO
• 6 CMOS-compatible serial ports
• 512K flash memory/256K or 512K data SRAM
• Low-power modes
• 8-channel, 12-bit A/D converter (RCM4100)
• 1.41” x 1.88” x 0.49” ( 36 mm × 48 mm × 12 mm)
14 | rabbit.com
RABBIT® 4000 • RABBITCORES
RCM4000 RabbitCore® Series
Targeted for embedded control applications needing 10Base-T Ethernet
connectivity for remote monitoring.
• Rabbit 4000 running @ 58.98 MHz
• 32 MB NAND flash for data
• 512K flash/512K SRAM
• Up to 5 CMOS-compatible
serial ports
• Low-power modes
• 1.84” x 2.42” x 0.77”
(47 mm × 61 mm × 20 mm)
• Up to 25 GPIO with multi-layer alternate pin functions • 8 channel 12-bit A/D converter
A PPLIC AT IO N S P OT L I GHT
Rabbit Keeps Things Flowing
FMC Technologies Uses the RCM4000 RabbitCore in Petroleum Metering Simulation
FMC Technologies manufactures
load controllers and flow computers
for the liquid petroleum industry,
providing customers an efficient way
to collect data for controlling valves,
pumps and other instruments. In
order to perform demonstrations
or tests, however, a meter or pulse
generator is required. This
equipment is very heavy and difficult
to set up and use, so FMC wanted to
find a way to eliminate it.
FMC’s Simumate solution is a
portable meter simulator that allows
customers to easily test and
demonstrate the functionality of
load controllers and flow computers.
At the heart of the Simumate is the
RCM4000 RabbitCore. The Simumate
connects to a PC via an Ethernet
connection, mimicking an actual
meter. Users may customize the
meter’s function via a web page and
access information about volume,
flow rate, temperature and pressure.
“The RCM4000 expedited the design
process by providing a powerful
canned hardware solution and
complete, well-illustrated software
examples. Its small form factor
provided us the ability to easily
create a handheld device,” said
Patrick Walsh a Electronic Engineer
for FMC Technologies. “We are
excited about the possibility of
swapping the tethered Ethernet
Simumate Display
for a wireless solution such as
the RCM4400W.”
With the RCM4000 and Dynamic C,
Rabbit helped FMC successfully
develop a solution that not only
saved time and money, but also
helped provide a reliable and costeffective product to their customers.
More Customer Success Stories at
www.rabbit.com/story
PRODUCT CATALOG | 15
RABBIT® 3000
CONNEC TIVIT Y • E THERNE T • EMBEDDED CONTROL
Rabbit® 3000 Product Family
The Rabbit 3000 microprocessor is designed specifically to deliver the
performance of a 16-bit processor in a low-cost 8-bit architecture for
embedded applications.
Liberate Your Embedded Design
The Rabbit 3000 microprocessor based
family of embedded products offers a
wide range of proven hardware
for real-time applications. Choose
from either core modules,
designed to provide an easy
way to add functionality to
your own board designs, or
single-board computers (SBCs).
Both offer a choice of
features such as Ethernet,
expandable memory,
and analog to let you
tailor the solution to
your application.
ICON LEGEND
4
16 | NEMA
rabbit.com
RoHS
Analog
Ethernet
miniSD
RN
RabbitNet Compliant
RABBIT® 3000 • RABBITCORES
Rabbit® 3000 RabbitCore® Line | Accelerate your development process by adding
Rabbit 3000 RabbitCore modules to your board. Not only can you add functionality, but you
can also change the module to adapt to a new application or new requirement. By using proven
Rabbit 3000 microprocessor based hardware, you can focus on overall system design, while
keeping the project schedule on track.
RCM3900 RabbitCore® Series
The most feature-rich Rabbit 3000 microprocessor based module.
• Rabbit 3000 @ 44.2 MHz
• 52 GPIO
• 512K flash memory, 512K program
execution SRAM, 512K data SRAM
• Up to 5 serial ports
• 1 GB flash mass storage option
(can be hot-swapped)
• 2-channel Quadrature decoder
• 1.85” x 2.73” x 0.86”
(47 mm x 69 mm x 22 mm)
• 10/100Base-T Ethernet port
RCM3750 RabbitCore® Module
Designed for small, cost-sensitive applications requiring 10/100Base-T
Ethernet connectivity.
• Rabbit 3000 @ 22.1 MHz
• 33 digital I/O, alternate I/O bus
• 10/100Base-T Ethernet
• 4 serial ports
• Up to 512K flash memory/512K SRAM • 2.95” x 1.20” x 0.89”
(75 mm x 30 mm x 23 mm)
RCM3700 RabbitCore® Series
The lowest priced Rabbit 3000 microprocessor based core module designed
for Ethernet/Internet applications.
• Rabbit 3000 up to 22.1 MHz
• 10Base-T Ethernet connectivity
• Up to 512K flash memory/512K SRAM
• 4 serial ports
• 2.95” x 1.20” x 0.88” (75 mm x 30 mm x 22 mm)
PRODUCT CATALOG | 17
RABBIT® 3000 • RABBITCORES
RCM3600 RabbitCore® Series
The lowest priced Rabbit 3000 family core module, designed for embedded
applications that do not require Ethernet connectivity.
• Rabbit 3000 up to 22.1 MHz
• Up to 512K flash memory/512K SRAM
• 33 digital I/O, alternate I/O bus
• 4 serial ports (IrDA, HDLC, asynch, SPI)
• 2.11” x 1.23” x 0.62” (54 mm x 31 mm x 16 mm)
RCM3400 RabbitCore® Series
The smallest Rabbit 3000 family core module, intended for applications
needing analog inputs.
• Rabbit 3000 @ 29.4 MHz
• 8-channel 12-bit A/D with programmable gain
• Up to 512K flash memory/512K SRAM
• 47 GPIO
• 5 serial ports
• 1.37” × 1.16 “ × 0.31” (35 mm × 29 mm × 7.9 mm)
RCM3365 RabbitCore® Series
Supports removable xD Picture memory cards up to 128 MB that can be
hot-swapped when the power is on. Designed for data-intensive applications.
• Rabbit 3000 @ 44.2 MHz
• 10/100 Base-T, RJ-45 port
• 32 MB NAND flash (RCM3365 only)
• xD Card slot (can be hot-swapped)
• 512K flash memory/512K SRAM
• 52 GPIO
• 6 serial ports
RN
18 | rabbit.com
• 1.850” × 2.725” × 0.86” (47 mm × 69 mm × 22 mm)
RABBIT® 3000 • RABBITCORES
RCM3305 RabbitCore® Series
Designed for applications needing serial flash and 10/100Base-T Ethernet.
RN
• Rabbit 3000 @ 44.2 MHz
• 49 GPIO
• 10/100Base-T Ethernet
• 6 serial ports
• 4 MB to 8 MB serial flash
• 1.850” × 2.725” × 0.86”
(47 mm × 69 mm × 22 mm)
• 512K SRAM plus 512K SRAM for data
RCM3200 RabbitCore® Series
Designed for applications needing 10/100Base-T Ethernet connectivity but
not serial flash memory.
• Rabbit 3000 up to 44.2 MHz
•
256K SRAM for data
• 10/100Base-T Ethernet •
52 GPIO
• Up to 512K fast flash and up to 512K SRAM for program
•
6 serial ports
•
2.73” × 1.85” × 0.86”
(69 mm × 47 mm × 22 mm)
RCM3100 RabbitCore® Series
Rabbit 3000 microprocessor based core module without Ethernet.
• Rabbit 3000 @ 29.4 MHz
• Low power “sleepy” modes • Up to 512K flash memory/512K SRAM (<2mA)
• 1.85” × 1.65” × 0.55”
• 54 GPIO
(47 mm × 42 mm × 14 mm)
• 6 serial ports
RCM3000 RabbitCore® Series
Intended for embedded systems needing 10Base-T Ethernet connectivity.
• Rabbit 3000 @ 29.4 MHz
•
52 GPIO
• 10Base-T Ethernet
•
6 serial ports
• Up to 512K flash memory/512K SRAM •
2.73” × 1.85” × 0.86”
(69 mm × 47 mm × 22 mm)
PRODUCT CATALOG | 19
RABBIT® 3000 • SINGLE-BOARD COMPUTERS
Rabbit® 3000 Single-Board Computer Line | Rabbit 3000 based single-board computers
(SBCs) are easy to use, come in a variety of form factors, and interface easily with other devices via
Ethernet or serial communications.
BL2600 Series
The BL2600 series offers our largest feature set, along with the capability to
add functions to fit the requirements of your application.
• Rabbit 3000 @ 44.2 MHz
• 10/100Base-T Ethernet or 10Base-T and non-Ethernet options available
• 512K flash memory and 512K SRAM
• Molex type connectors for industry standard wire harness connectivity
• 36 GPIO
• 5 serial ports
• 12 analog channels: eight 11-bit A/D inputs and four 12-bit D/A outputs
• Available RabbitNet™ expansion and miniSD or xD removable card options
RN
• 4.85” × 4.96” × 1.00” (123 mm × 126 mm × 25 mm)
BL2500 Series
SBCs available with or without the 10Base-T or 10/100Base-T option.
• Rabbit 3000 @ 29.4 MHz
• Molex type connectors for industry standard wire harness connectivity
• 6 serial ports (2 RS-232, RS-485, RS-422, 2 CMOS)
• 16 digital inputs and 8 digital high-current sinking outputs
• Two 9-bit PWM analog output channels
• One 8-bit analog input channel
• 6 serial ports
• 3.94” × 3.94” × 1.16” (100 mm × 100 mm × 29 mm) with Ethernet
RN
20 | rabbit.com
• 3.94” × 3.94” × 0.80” (100 mm × 100 mm × 20 mm) without Ethernet
RABBIT® 3000 • SINGLE-BOARD COMPUTERS
LP3500 Series
Compact, low-power series designed to operate in remote locations that do
not need Ethernet connectivity. On-board analog option.
• Rabbit 3000 @ 7.4 MHz
• 26 industrialized I/O + 1 relay
• Low operating consumption:
<20 mA at 7.4 MHz
•
3.65” × 2.60” × 0.45”
(93 mm × 66 mm × 11 mm)
• Power-save mode draws <100 µA A PPLIC AT IO N S P OT L I GHT
Rabbit Captures the Moment
Marvell Consultants and Picsolve Develop Theme Park Camera Solution with RCM3200
There are moments during an
amusement park ride when it would
be fun to take a picture, but
physically impossible to do so.
Picsolve specializes in digital
photographic solutions for theme
parks and tourist locations. The
company wanted to use digital
cameras to obtain close-up pictures
of 190 guests in a theater.
Pre-determined points, such as
exciting scenes, trigger the cameras
to take a photograph.
picture is taken, the raw image data
is transferred to external SRAM. The
RCM3200 then transfers the raw data
to the PC using the TFTP protocol.
Steve Marchant of Marvell
Consultants chose the RCM3200
RabbitCore to help Picsolve provide
customers with a picture perfect
experience. The RCM3200 waits for
a user datagram protocol (UDP)
from the host PC, then toggles
input to a complex programmable
logic device, which starts the timed
exposure of the cameras. Once the
In addition to reducing the cabling
nightmare that other solutions might
have incurred, the cost-effective
RCM3200 offers plenty of memory,
I/O and processing power. Plus,
Dynamic C provides straight forward
development, reducing development
time.
“In this tough environment, we
needed an industrial grade solution
working over long cable runs. We
settled on the idea of using Power
over Ethernet to supply power and
communications to each
camera over a single UTP cable,” said
Marchant.
Rabbit provided Picsolve with a
means to rapidly develop a reliable
solution, at an affordable price.
More Customer Success Stories at
www.rabbit.com/story
PRODUCT CATALOG | 21
RABBIT® 2000
Basic Embedded Connectivity and Control
Rabbit® 2000 Product Family
The Rabbit 2000 microprocessor based product family features clock speeds
up to 30 MHz and wired connectivity for embedded control.
Low-Cost Embedded Control
Rabbit 2000 microprocessor based
products include single-board
computers (SBCs), modular embedded
systems, and operator interfaces,
which provide wired connectivity
such as serial ports for RS-232 and
RS422/485, as well as Ethernet.
ICON LEGEND
4
22 |NEMA
rabbit.com
RoHS
Analog
Ethernet
RABBIT® 2000 • SINGLE-BOARD COMPUTERS
Rabbit® 2000 Single-Board Computer Line | These compact, easy-to-use SBCs are used
worldwide for a broad array of applications. The Rabbit 2000 based SBCs are available in a variety of
form factors and offer different options for wired connectivity.
BL2100 Series
SBC with enhanced feature set, Ethernet connectivity and keypad/display.
• Rabbit 2000 @ 22.1 MHz
• 40 digital I/O
• 10Base-T Ethernet, RJ-45 connector
• 11 A/D inputs and 4 analog outputs
• 4 serial ports
• Optional backlit 122 x 32 display, 7 user-relegendable keys, 7 LEDs
• Provision for 0.1” IDC or friction-lock connectors
BL2000 Series
SBC with basic options for Ethernet and analog inputs.
• Rabbit 2000 @ 22.1 MHz
• 10Base-T Ethernet, RJ-45 connector
• Up to 28 digital I/O
• Up to 11 A/D inputs and 2 analog outputs
• On-board relay
• Provision for 0.1” IDC or friction-lock connectors
BL1800 Series
Our most compact and lowest cost SBC for small cost-sensitive applications.
• Rabbit 2000 up to 29.5 MHz
• Up to 15 configurable I/O
• 1 low-grade A/D Input and 2 analog outputs
• 4 serial ports
• 64 mm x 89 mm
PRODUCT CATALOG | 23
RABBIT® 2000 • SR9000 SMART STAR™ SYSTEM
SR9000 Smart Star™ System | SR9000 is a Rabbit 2000 microprocessor based scalable
embedded control system that you can customize for real-time control and data acquisition
applications. The modular Smart Star system offers multiple options such as Ethernet
connectivity, digital and analog I/O, and a keypad and display unit.
Top: SR9050
Left: SR9010
Right: Keypad display attached to
SR9010
SR9010
• 8-slotted backplane with 1 slot for CPU card and 7 slots for I/O cards
• Optional keypad/display interface
SR9050
• 4-slotted backplane with 1 slot for CPU card and 3 slots for I/O cards
• Optional keypad/display interface
24 | rabbit.com
RABBIT® 2000 • SR9000 SMART STAR™ SYSTEM
The following are CPU cards, I/O and relay cards, and the
keypad/display available for the Smart Star control system.
Smart Star™ CPU Cards
• Model SR9150 – Rabbit 2000 microprocessor based CPU card with 10Base-T RJ-45 Ethernet port
• Model SR9160 – Rabbit 2000 microprocessor based CPU card without Ethernet
Smart Star™ Digital I/O Cards
• Model SR9200 – 16 inputs and 8 sinking outputs
• Model SR9205 – 16 inputs and 8 sourcing outputs
• Model SR9210 – 8 inputs and 16 digital sinking outputs
• Model SR9215 – 8 digital inputs, 16 sourcing outputs
• Model SR9220 – 8 inputs and 8 sinking outputs
Smart Star™ A/D Converter Cards
• Model SR9300 – Eleven 12-bit analog inputs (0–10 V)
• Model SR9310 – Eleven 12-bit analog inputs (±10 V)
Keypad/Display Module
The Keypad/Display plugs directly
into the backplane, and offers an
operator interface for the SR9000
expandable system.
• 122 x 32 graphic LCD with
programmable backlight
• 7 relegendable keypad
• 7 user programmable LEDs
• Meets NEMA 4 water resistance
• Model SR9320 – Eleven 12-bit analog inputs (4–20 mA)
Smart Star™ D/A Converter Cards
Smart Star™ Relay Cards
• Model SR9400 – Eight 12-bit analog outputs (0–10 V)
• Model SR9500 – 6 relays: 1 SPDT, 5 SPST, including snubbers
• Model SR9410 – Eight 12-bit analog outputs (±10 V)
• Model SR9420 – Eight 12-bit analog outputs (4–20 mA)
• Model SR9510 – 8 SPDT relays, no on-board snubbers
PRODUCT CATALOG | 25
OPERATOR INTERFACES
INTELLIGENT TERMINAL S WITH I/O
Operator Interfaces
Rabbit offers a range of keypads and displays that complement our boards
and systems. These interfaces allow for easy integration of interactivity to
your embedded control application.
Embedded Control Interfaces
The Rabbit line of operator interfaces
provides the data acquisition and
display functionality to support most
real-time systems. Options include
connectivity with Ethernet and
RabbitNet, touchscreen capability,
and NEMA 4 water resistance. All
operator interfaces include both
RS-232 and RS-485 capability.
ICON LEGEND
4
26 | NEMA
rabbit.com
RoHS
Analog
Ethernet
RN
RabbitNet Compliant
OPERATOR INTERFACES
OP7200 eDisplay
Intelligent operator interface that offers a complete range of features.
• 1/4 VGA display (320 × 240 pixels)
• 10Base-T Ethernet, RJ-45 connector
• RabbitNet Expansion
• Up to 27 industrialized digital I/O protected to ±36V
• Meets NEMA 4 water resistance
• Optional 8 A/D inputs
• Optional 4096 × 4096 analog touchscreen
• 5.67” × 4.41” × 1.70” (144 mm × 112 mm × 43 mm)
RN
OP7100 Smart Screen
Easy-to-integrate graphic display that connects via RS-485/RS-232; ideal for
remote terminals, automated machinery and control systems.
• 1/4 VGA display (320 x 240 pixels)
• Vertical or horizontal orientation
• Wide viewing angle
• 16 digital I/O
• Meets NEMA 4 water resistance
• Touchscreen matrix (optional)
• 8.0” x 5.4” x 0.25” (203 mm x 137 mm x 6 mm)
RN
OP6800 Minicom
Small, low-cost intelligent terminal interface.
• 122 x 32 graphic display/keypad
• 24 industrialized digital I/O
• Meets NEMA 4 water resistance
• 4 serial ports
• Optional 10Base-T Ethernet
• Compact 4.50” × 3.60” × 0.30” (114 mm × 91 mm × 7.6 mm)
RN
PRODUCT CATALOG | 27
APPLICATION KITS
Complete Embedded Solutions
Application Kits
Rabbit offers a wide range of application kits with all the necessary hardware
and software to get your project up and running quickly.
Apply Our Solution
Rabbit application kits provide
sample programs and reference
designs to give you a head start
in your development, even with
new technology. You can test and
debug your design in real time
with the kit hardware, allowing
you to finish faster than ever
expected. Reduce your design
risk with Rabbit application kits!
28 | rabbit.com
APPLICATION KITS
Rabbit RIO® Programmable I/O Kit
The Rabbit RIO programmable I/O kit demonstrates how to expand the I/O
and features of any microprocessor design. See how to add additional digital
I/O, PWM, TRIAC signals, input capture, and quadrature channels. The kit
provides a complete development platform to get you started.
• Rabbit RIO programmable I/O chip
• RCM4110 RabbitCore module
• Rabbit RIO prototyping board
• AC adapter and programming cable
• Complete Dynamic C software and sample programs
Wireless 802.15.4 Application Kit
Implement a practical, low-cost, low-power network of remote devices
communicating via IEEE 802.15.4.
• RCM3720 RabbitCore module
• 10Base-T Ethernet
• Uses Digi’s XBee® RF modules for simple wireless connections
• Sample programs and libraries to develop Ethernet-to-wireless gateway functionality and networking communications
• Simple HTML programming with refresh
• User-friendly web interface for IEEE 802.15.4 network setup, RF modem configuration and firmware update functions
Bluetooth® Application Kit
Generate a Bluetooth design using the hardware and software provided.
The 2.4 GHz FHSS (Frequency Hopping Spread Spectrum) technology
ensures high reliability and minimal impact from interference.
• RCM3100 RabbitCore module and prototyping board
• Bluetooth radio modules to plug directly into supported RabbitCore modules and SBCs
• Dynamic C integrated development environment
• Bluetooth drivers, libraries, sample programs and manuals
PRODUCT CATALOG | 29
APPLICATION KITS
Wireless Control Application Kit
Program a Rabbit single-board computer (SBC) using standard software
environments commonly used for Programmable Logic Controllers (PLCs).
The kit includes two Digi RF modems operating at frequencies of either
900 MHz or 2.4 GHz, and is a template for a robust wireless implementation
where a serial connection is required. The modems are coupled with a
DIP-switchable RS-232/422/485 interface board and they regularly
outperform more expensive RF modems.
• LP3500 SBC
• 2 FCC approved, license-free Digi RF modules: a 900 MHz XCite™
and a 2.4 GHz 24XStream®
• Complete software libraries and samples
• ModBus control and PPP support for serving web pages
• Simple web programming with real-time refresh
• User-friendly interface for simple wireless set-up and configuration
Camera Interface Application Kit
Enable your customers to monitor and control from their desktop via LAN
communication with machinery, sensors and other serial devices. You can
also add SSL and AES encryption software to secure data transmission.
The kit contains a VGA camera module, two servos that allow for pan-and-tilt
motion, an infrared motion sensor for event triggering, and a RabbitCore
module that can support up to 128 MB for storing pictures. Store and manage
photos, send event notifications or send the logged files to an FTP server.
• RCM3365 RabbitCore module
• 10/100Base-T Ethernet
• Socket for removable memory
• Sample programs demonstrate motion detection, I/O input and timed event capture
• FAT file system included for storing and managing photos and data
• User-friendly web interface for simple event management
30 | rabbit.com
APPLICATION KITS
Embedded PLC Application Kit
Program a Rabbit single-board computer (SBC) using a standard software
environment that is commonly used with Programmable Logic Controllers
(PLCs). Design engineers in automation and control applications can now
make use of more cost-effective hardware solutions from Rabbit, while
maintaining their software.
• BL2500 SBC
• Embedded PLC kernel for the BL2500 SBC
• Prototyping wires, connectors and terminals
• An ISaGRAF V3.50 workbench
Multi-Port Serial-to-Ethernet Application Kit
This kit provides the hardware and software necessary for sensors and other
serial devices to communicate via a LAN or other network to enable your
customers to monitor sensors from their desktop. You can also use other
optional software modules to secure data through SSL and encryption.
• RCM3700 RabbitCore module with 10Base-T Ethernet connectivity
• RS-232 serial ports
• Dynamic C integrated development environment
• Royalty-free TCP/IP stack in source code
• Sample programs and libraries
Color Touchscreen Application Kit
Add advanced user interface functionality to embedded systems with
the Reach Technology color touchscreen and a RabbitCore module. Color
touchscreens provide more on-screen information, allowing for better
control in industrial automation applications.
• RCM3720 RabbitCore module
• Audible beeper for audible touch feedback and alarms
• 5.7” TFT Hitachi display
• Backlight enable and brightness control
• Rugged, waterproof NEMA 4 compliant industrial steel enclosure
• Supports user-created bitmaps with RLE compression
• Extensive API to make programming easier
PRODUCT CATALOG | 31
APPLICATION KITS
Secure Embedded Web Application Kit 2.0
Secure data transmission is becoming increasingly important. The
Secure Embedded Web Application Kit 2.0 provides software tools and
sample security programs to build secure web interfaces for new and
existing applications.
• RCM4300 RabbitCore module
• Dynamic C integrated development environment
• Advanced Encryption Standard (AES) software module
• Secure Socket Layer (SSL) and Transport Layer Security (TLS)
software modules
• RabbitWeb system for rapid web development using embedded devices
• File Allocation Table (FAT) filing system
• Practical Embedded Security book, a reference to secure data transmission
• Sample programs
GPRS/GSM Application Kit
Combine control with wireless GPRS/GSM communication. Enable your
customers to change settings and receive alerts from anywhere in the world.
They can upload data via wireless communications, send commands from
one machine to another, or receive vehicle location and conditions via email.
Libraries and sample programs show you how to get started on the project.
• RCM3100 RabbitCore module
• Enfora™ Spider SA-GL Quad Band wireless modem and antenna
• GUI and keypad configuration menu system
• Dynamic C integrated development environment
32 | rabbit.com
APPLICATION KITS
Dedicated to Your Success
Fostering Creativity and Boosting Productivity
Rabbit’s Applications and Technical Support staff is dedicated in helping
new and existing Rabbit users to accelerate their development schedules. We
generate applications kits – such as our Bluetooth or Wireless Control Kits – to
help our customers learn new technologies, get ideas about how to integrate
into embedded systems, and arrive at solutions. Rabbit sets the standard for
application kits and we are proud of our exceptional products that boost
design engineers’ productivity and creativity.
Our experienced technical staff continuously share their vast knowledge
though resources such as technical notes, white papers and other available
resources. The technical staff also supports the Rabbit Forum where the large
community of Rabbit designers can interact to learn more about how to use
Rabbit products to solve their design challenges.
In addition, Rabbit Technical Support staff responds to questions from
individual design engineers whenever they encounter obstacles in their
product development efforts. When designers have very broad questions,
such as how to use the Rabbit API to configure a network, or questions about
protected access in Wi-Fi networks, they can Ask Larry at www.rabbit.com/
support/ask_larry/.
Our goal is to help you be successful in your product development. When you
consider Rabbit, consider all that Rabbit does to support you.
www.rabbit.com/support/ask_larry
PRODUCT CATALOG | 33
RABBITCORE® SELECTION GUIDE
Selection Guide
Rabbit 3000
Rabbit 4000
RabbitCore Selection Guide
Model
Ethernet/
Wireless
Clock
(MHz)
Prog.
Flash
Data
SRAM
RCM4510W
ZigBee 802.15.4
29.49
150 mA @ 3.3 V while transmitting/receving, 80 mA @ 3.3 V while not transmitting/receiving,
< 20 uA @ 3.3 V while asleep (with ZigBee modem and pins unloaded)
512K
512K
RCM4400W
Wi-Fi 802.11b
58.98
3.3 V DC +/- 5%, 450 mA @ 3.3 V while transmitting/receiveing, 80 mA @ 3.3 V while not transmitting/receving
512K
512K
RCM4310
RCM4300
10/100Base-T
58.98
3.0-3.6 V DC, 350 mA (typ.) @ 3.3 V, 385 mA @ 3.6 V and 85° C (max.)
512K
512K
10/100Base-T
58.98
3.0-3.6 V DC, 350 mA (typ.) @ 3.3 V, 385 mA @ 3.6 V and 85° C (max.)
1 MB
512K
RCM4210
10/100Base-T
29.49
3.0-3.6 V DC, 200 mA @ 3.3 V (typ.), (pins unloaded)
512K
512K
RCM4200
10/100Base-T
58.98
3.0-3.6 V DC, 240 mA @ 3.3 V (typ.), (pins unloaded)
512K
512K
RCM4120
No
59.98
3.0-3.6 V DC, 125 mA @ 3.3. V (pins unloaded)
512K
512K
RCM4110
No
29.49
3.0-3.6 V DC, 65 mA @ 3.3 V (pins unloaded)
512K
256K
RCM4100
No
58.98
3.0-3.6 V DC, 125 mA @ 3.3. V (pins unloaded)
512K
512K
512K
16-bit
Input (V DC/mA)
RCM4010
10Base-T
58.98
3.0-3.6 V DC, 90 mA @ 3.3 V (preliminary, pins unloaded)
512K
16-bit
RCM4000
10Base-T
58.98
3.0-3.6 V DC, 90 mA @ 3.3 V (preliminary, pins unloaded)
512K
16-bit
512K
16-bit
RCM3910
10/100Base-T
44.2
3.15-3.45 V DC/325 mA @ 44.2 MHz, 3.3 V
512K
512K
512K
RCM3900
10/100Base-T
44.2
3.15-3.45 V DC/325 mA @ 44.2 MHz, 3.3 V
512K
RCM3750
10/100Base-T
22.1
4.75-5.25 V DC/175 mA @ 22.1 MHz
512K
512K
RCM3720
10Base-T
22.1
4.75-5.25 V DC/100 mA @ 22.1 MHz
512K
256K
RCM3710
10Base-T
22.1
4.75-5.25 V DC/100 mA @ 22.1 MHz
256K
128K
RCM3700
10Base-T
22.1
4.75-5.25 V DC/100 mA @ 22.1 MHz
512K
512K
RCM3610
No
22.1
4.75-12.6 V DC/60 mA @ 22.1 MHz
256K
128K
RCM3600
No
22.1
4.75-12.6 V DC/60 mA @ 22.1 MHz
512K
512K
RCM3410
No
29.4
3.00-3.45 V DC/97 mA @ 29.4 MHz
256K
256K
RCM3400
No
29.4
3.00-3.45 V DC/97 mA @ 29.4 MHz
512K
512K
RCM3375
10/100Base-T
44.2
3.15-3.45 V DC/250 mA
512K
512K
RCM3365
10/100Base-T
44.2
3.15-3.45 V DC/250 mA
512K
512K
RCM3315
10/100Base-T
44.2
3.15-3.45 V DC/250 mA
512K
512K
RCM3305
10/100Base-T
44.2
3.15-3.45 V DC/250 mA
512K
512K
RCM3220
No
44.2
3.15-3.45 V DC/255 mA
512K
256K
RCM3200
10/100Base-T
44.2
3.15-3.45 V DC/255 mA
512K
256K
RCM3110
No
29.4
3.15-3.45 V DC/75 mA
256K
128K
RCM3100
No
29.4
3.15-3.45 V DC/75 mA
512K
512K
RCM3010
10Base-T
29.4
3.15-3.45 V DC/150 mA
256K
128K
RCM3000
10Base-T
29.4
3.15-3.45 V DC/150 mA
512K
512K
34 | rabbit.com
RABBITCORE® SELECTION GUIDE
Development and Starter Kits are available for our line of SBCs, RabbitCores,
Operator Interfaces and Smart Star solutions. Everything you need to get started.
Serial
Flash
NAND
Flash
Removable
Memory
Config.
I/O
Digital
Inputs
Digital
Outputs
Analog
Serial
Ports
Product
Size (mm)
Part Number
U.S. Development Kit
Int’l Development Kit
Page
No
No
No
49
—
—
Yes
6
47 x 72 x 14
20-101-1170
101-1118
—
13
No
No
No
35
—
—
No
6
47 x 72 x 13
20-101-1140
101-1173
13
1 MB
No
Yes
36
—
—
No
6
47 x 72 x 21
20-101-1139
101-1177 with RCM4300 RabbitCore
14
2 MB
No
Yes
28
—
—
Yes
5
47 x 72 x 21
20-101-1138
101-1177 with RCM4300 RabbitCore
14
4 MB
No
No
35
—
—
No
5
47 x 61 x 21
20-101-1132
101-1155 with RCM4200
101-1156 with RCM4200
14
8 MB
No
No
25
—
—
Yes
4
47 x 61 x 21
20-101-1131
101-1155
101-1156
14
No
No
No
40
—
—
No
6
36 x 48 x 12
20-101-1154
101-1157
101-1158
14
No
No
No
40
—
—
No
6
36 x 48 x 12
20-101-1093
101-1101
101-1102
14
No
No
No
29
—
—
Yes
6
36 x 48 x 12
20-101-1105
101-1157
101-1158
14
No
No
No
28
—
—
No
5
47 x 61 x 20
20-101-1112
101-1114
101-1115
15
No
32 MB
No
22
—
—
Yes
5
47 x 61 x 20
20-101-1094
101-1145
101-1146
15
No
No
Yes
44
4
4
No
5
30 x 75 x 23
20-101-1197
101-1226 with RCM3900
17
No
32 MB
Yes
44
—
—
No
5
30 x 75 x 23
20-101-1196
1 MB
No
No
31
4
4
No
4
30 x 75 x 23
20-101-1028
101-1049
101-1226
101-1050
17
17
1 MB
No
No
31
—
2
No
4
30 x 75 x 23
20-101-0961
101-0680 with RCM3700
101-0681 with RCM3700
17
1 MB
No
No
31
—
2
No
4
30 x 75 x 23
20-101-0675
101-0680 with RCM3700
101-0681 with RCM3700
17
1 MB
No
No
31
—
2
No
4
30 x 75 x 23
20-101-0674
101-0680
101-0681
17
No
No
No
31
—
2
No
4
31 x 54 x 16
20-101-0673
101-0678 with RCM3600
101-0679 with RCM3600
18
No
No
No
31
—
2
No
4
31 x 54 x 16
20-101-0672
101-0678
101-0679
18
No
No
No
41
3
3
Yes
5
29 x 35 x 7.9
20-101-0562
101-0587 with RCM3400
101-0588 with RCM3400
18
No
No
No
41
3
3
Yes
5
29 x 35 x 7.9
20-101-0561
101-0587
101-0588
18
No
No
Yes
44
4
4
No
6
47 x 69 x 22
20-101-1055
101-1053 with RCM3365
101-1054 with RCM3365
18
No
32 MB
Yes
44
4
4
No
6
47 x 69 x 22
20-101-1051
101-1053
101-1054
18
4 MB
No
No
43
3
3
No
5
47 x 69 x 22
20-101-1068
101-1069 with RCM3305
101-1070 with RCM3305
18
8 MB
No
No
43
3
3
No
5
47 x 69 x 22
20-101-1067
101-1069
101-1070
19
No
No
No
44
4
4
No
6
47 x 69 x 12
20-101-0522
101-0552 with RCM3200
101-0553 with RCM3200
19
No
No
No
44
4
4
No
6
47 x 69 x 22
20-101-0520
101-0552
101-0553
19
No
No
No
46
4
4
No
6
42 x 47 x 14
20-101-0518
101-0533 with RCM3100
101-0534 with RCM3100
19
No
No
No
46
4
4
No
6
42 x 47 x 14
20-101-0517
101-0533
101-0534
19
No
No
No
44
4
4
No
6
47 x 69 x 22
20-101-0508
101-0523
101-0524
19
No
No
No
44
4
4
No
6
47 x 69 x 22
20-101-0507
101-0533 with RCM3100
101-0534 with RCM3100
19
PRODUCT CATALOG | 35
SINGLE-BOARD COMPUTERS • OPERATOR INTERFACES | SELECTION GUIDE
Rabbit 2000
Rabbit 3000
Single-Board Computer Selection Guide
Model
Ethernet
Clock (MHz)
Input (V DC/mA)
Prog. Flash
Data SRAM
Digital
Inputs
BL2610
No
29.4
9-36 V DC/12 W
512K
512K
8
BL2600
10/100Base-T
44.2
9-36 V DC/12 W
512K
(512K Prog Exec.) 256K
8
BL2510
No
29.4
8-40 V DC/0.8 W (no load)
256K, 512K Option
128K, 512K Option
16
BL2500
10/100Base-T
29.4
8-40 V DC/0.8 W (no load)
256K, 512K Option
128K, 512K Option
16
LP3510
No
29.4
3-30 V DC/20 mA @ 7.4 MHz
256K
128K
16
LP3500
No
7.4
3-30 V DC/20 mA @ 7.4 MHz
512K
512K
16
BL2130
No
22.1
9-36 V DC/1.5 W (w/o display) , 3 W (w/ display)
256K
128K
24
BL2120
No
22.1
9-36 V DC/1.5 W (w/o display), 3 W (w/ display)
256K
128K
24
BL2110
10Base-T
22.1
9-36 V DC/1.5 W (w/o display), 3 W (w/ display)
256K
128K
24
BL2100
10Base-T
22.1
9-36 V DC/1.5 W (w/o display), 3 W (w/ display)
256K
128K
24
BL2030
No
22.1
9-40 V DC or 24 V AC/1.5 W
256K
128K
11
BL2020
No
22.1
9-40 V DC or 24 V AC/1.5 W
256K
128K
11
BL2010
10/100Base-T
22.1
9-40 V DC or 24 V AC/1.5 W
256K
128K
11
BL2000
10/100Base-T
22.1
9-40 V DC or 24 V AC/1.5 W
256K
128K
11
BL1820
No
14.7
7.5-25 V DC/100 mA
128K
128K
7
BL1810
No
14.7
7.5-25 V DC/100 mA
128K
128K
6
BL1800
No
29.5
8-40 V DC/1.2 W
256K
128K
6
Z180
Rabbit 2000
Operator Interface Selection Guide
Model
Ethernet
Clock
(MHz)
Input (V DC/mA)
Keypad/Display
OP6800
10Base-T
22.1
9-36 V DC/1.5 W
132 x 32 Pixel graphic LCD (programable backlight), user-relegenadable keypad with 7-key / 7-LED interface
OP6810
None
22.1
9-36 V DC/1.5 W
132 x 32 Pixel graphic LCD (programable backlight), user-relegenadable keypad with 7-key / 7-LED interface
OP7200
10Base-T
22.1
9-40 V DC or 22-26 V AC/4 W
4096 x 4096 resistive touchscreen. 1/4 VGA (320 x 240 p) with programmable white LED backlight, 9-key keypad
OP7210
10Base-T
22.1
9-40 V DC or 22-26 V AC/4 W
1/4 VGA (320 x 240 pixels) with programmable white LED backlight, 9-key keypad
8 x 8 touchscreen. STN, 320 x 240 pixels, blue-on-white background. Pixel matrix is 4.53” x 3.40” (115 x 86 mm)
(0.36 mm pitch). Viewing area is 4.76” x 3.58” (121 x 91 mm). Adjustable contrast with automatic temperature
compensation. CCFL backlight with software control.
STN, 320 x 240 pixels, blue-on-white background. Pixel matrix is 4.53” x 3.40” (115 x 86 mm) (0.36 mm pitch).
Viewing area is 4.76” x 3.58” (121 x 91 mm). Adjustable contrast with automatic temperature compensation.
CCFL backlight with software control.
OP7100
None
18.432
12-30 V DC/
4.5 W (backlight on)/
1.5 W (backlight off )
OP7110
None
18.432
12-30 V DC/
4.5 W (backlight on)/
1.5 W (backlight off )
Accessories
Rabbit provides many accessories and peripherals to use with our core modules,
single-board computers, application kits and development kits. We offer numerous
cables, adapter boards, flash memories, headers, connectors and other
products for your development process. For more information,
please visit www.rabbit.com/peripherals and find what you
need to get started.
36 | rabbit.com
RS-232-to-USB
Converter Cable
for USB-Only PCs
SINGLE-BOARD COMPUTERS • OPERATOR INTERFACES | SELECTION GUIDE
Digital
Outputs
Config.
I/O
Analog
Serial
Ports
Product
Size (mm)
Part Number
U.S. Starter Kit
Int’l Starter Kit
Page
4
16
Yes
5
123 x 126 x 25
20-101-0891
20-101-0891, 101-0626
20-101-0891, 101-0627
20
20-101-0889, 101-0626
4
16
Yes
5
123 x 126 x 25
20-101-0889
8
—
Yes
6
100 x 100 x 20
20-101-0576
20-101-0889, 101-0627
8
—
Yes
6
100 x 100 x 29
20-101-0575
101-0577
101-0578
20
10
—
No
6
66 x 93 x 11
101-0526
20-101-0525, 101-0529
20-101-0525, 101-0530
21
10
—
Yes
6
66 x 93 x 11
20-101-0525
101-0526, 101-0529
101-0526, 101-0530
21
16
—
No
4
87 x 105 x 24
20-101-0464
20-101-0464, 101-0482
20-101-0464, 101-0483
23
16
—
Yes
4
87 x 105 x 24
20-101-0463
20-101-0463, 101-0482
20-101-0463, 101-0483
23
16
—
No
4
87 x 105 x 24
20-101-0462
20-101-0462, 101-0482
20-101-0462, 101-0483
23
16
—
Yes
4
87 x 105 x 24
20-101-0461
20-101-0461, 101-0482
20-101-0461, 101-0483
23
10
—
Yes
4
87 x 105 x 21
20-101-0457
101-0457, 101-0472
101-0457, 101-0476
23
10
—
Yes
4
87 x 105 x 21
20-101-0456
101-0456, 101-0472
101-0456, 101-0476
23
10
—
Yes
4
87 x 105 x 21
20-101-0455
20-101-0455, 101-0472
20-101-0455, 101-0476
23
10
—
Yes
4
87 x 105 x 21
20-101-0430
101-0430, 101-0472
101-0430, 101-0476
23
5
15
Yes
4
64 x 89 x 16
20-101-0358
101-0363
101-0364
23
4
14
Yes
4
64 x 89 x 24
20-101-0357
101-0363
101-0364
23
4
14
Yes
4
64 x 89 x 19
20-101-0356
101-0363
101-0364
23
—
20
20
Prog.
Flash
Data
SRAM
Digital
Inputs
Digital
Outputs
Analog
Serial
Ports
Board Size
(mm)
Enclosure Size
(mm)
Part Number
U.S. Starter Kit
Int’l Starter Kit
Page
256K
128K
13
11
No
4
66 x 76 x 28
114 x 91 x 7.6
20-101-0654
20-101-0492, 101-0500
0-101-0492, 101-0501
27
256K
128K
13
11
No
4
66 x 76 x 28
114 x 91 x 7.6
20-101-0497
20-101-0497, 101-0500
20-101-0497, 101-0501
27
256K
128K
19
8
Yes
4
119 x 95.3
112 x 144 x 43
101-0535
20-101-0535, 101-0543
20-101-0535, 101-0544
27
256K
128K
16
8
No
4
119 x 95.3
112 x 144 x 43
101-0536
101-0536, 101-0543
101-0536, 101-0544
27
512K
128K
8
8
No
2
137 x 203 x 6
137 x 203 x 6
20-101-0303
20-101-0303, 101-0306
27
512K
128K
8
8
No
2
137 x 203 x 6
137 x 203 x 6
101-0304
101-0304, 101-0306
27
DB-9 to 10-Pin Flat Ribbon
Connector Serial Cable
Rabbit Cloning Board for
Copying Compiled Software
PRODUCT CATALOG | 37
I/O EXPANSION CARDS | SELECTION GUIDE
Model
Description
Voltage
Environmental
Board Size
(mm)
Part Number
Starter Kit with Ethernet
(U.S./Int’l)
Starter Kit without
Ethernet (U.S. / Int’l)
SR9010
8 slots: 1 for CPU 7 for
I/O expansion cards
9-30 V DC/1 A
-40° C to +70° C
165 x 107 x 14
20-101-0512
101-0427, 101-0486,
101-0512
101-0427, 101-0506,
101-0512
24
SR9050
4 slots: 1 for CPU 3 for
I/O expansion cards
9-30 V DC/1 A
-40° C to +70° C
95 x 112 x 19
20-101-0487
101-0427, 101-0486,
20-101-0487
101-0427, 101-0506,
20-101-0487
24
Voltage
Environmental
Board Size
(mm)
Part Number
Page
SR9150
10Base-T Ethernet port, 512K flash
memory, 128K SRAM, 3V battery
backup, 3 serial ports, real-time
clock, five 8-bit timers and one
10-bit timer @ 22.1 MHz
5 V DC/190 mA
-40° C to +70° C
102 x 79 x 25
20-101-0486
25
SR9160
Same as above without
Ethernet port
5 V DC/190 mA
-40° C to +70° C
102 x 79 x 25
20-101-0506
25
Expansion Card Specifications
Part Number
Page
SR9200
16 inputs and 8 outputs, sinking
20-101-0389
25
SR9205
16 inputs and 8 outputs, sourcing
20-101-0437
25
SR9210
8 inputs and 16 outputs, sinking
20-101-0390
25
ST9220
8 inputs and 8 outputs, sinking
20-101-0391
25
SR9300
Eleven 12-bit @ 100 kΩ, 0-10 V DC, up to 10,000 samples/sec.
20-101-0392
25
SR9310
Eleven 12-bit @ 100 kΩ, +/-10 V DC, up to 10,000 samples/sec.
101-0423
25
SR9320
Eleven 12-bit @ 249 Ω, 4-20 V DC, up to 10,000 samples/sec.
20-101-0444
25
SR9400
Eight 12-bit, 0-10 V DC update rate 16 kHz
20-101-0393
25
SR9410
Eight 12-bit, +/-10 V DC update rate 16 kHz
101-0394
25
SR9420
Eight 12-bit, 4-20 mA, update rate 16 kHz
20-101-0445
25
SR9500
6 total: 1 SPDT, 5 SPST (including snubbers)
20-101-0395
25
SR9510
8 SPDT (no onboard snubbers)
20-101-0440
25
Digital I/O
Model
Analog Input I/O
Description
Analog Output I/O
Model
Relya I/O
Rabbit 2000 CPU Card
Backplane
Smart Star Selection Guide
38 | rabbit.com
Page
GLOSSARY
Glossary
AES (Advanced Encryption Standard)
An encryption standard that uses
128-, 192- and 256-bit keys to secure
sensitive data.
Compiler
Software that translates a program
written in a high-level programming
language (C/C++, COBOL, etc.) into
machine language. A compiler usually
generates assembly language first and
then translates the assembly language
into machine language. A utility known
as a “linker” then combines all required
machine language modules into an
executable program that can run in
the computer.
Debugger
Software that helps a programmer
debug a program by stopping at
certain breakpoints and displaying
various programming elements. The
programmer can step through source
code statements one at a time while the
corresponding machine instructions are
being executed.
Dynamic C®
An integrated development environment
that combines an integrated C compiler,
editor, loader and debugger designed
specifically for Rabbit® microprocessor
based products.
Embedded System
An electronic system that uses a
CPU chip, but is not used in a
general-purpose workstation, desktop
or laptop computer. Found in
transportation, such as automobiles,
planes, trains and space vehicles, and
industrial controls, such as machine
tools, robots and access security.
Embedded systems are also found in
consumer electronic products like
cameras, cell phones, handhelds and
toys, as well as in office appliances
like copiers, phone systems and
temperature controls.
Ethernet
The standard local area network (LAN)
access method. A reference to “LAN,”
“LAN connection” or “network card”
automatically implies Ethernet. Defined
by the IEEE as the 802.3 standard,
Ethernet is used to connect computers
in a company or home network as
well as to connect a single computer
to a cable modem or DSL modem for
Internet access.
FAT (File Allocation Table)
A file system developed by Microsoft®
that is the primary file system for consumer versions of Microsoft Windows®.
IEEE 802.15.4
A standard which specifies the physical
layer (PHY) and medium access control
(MAC) for low-rate wireless personal area
networks (LR-WPANs). It is the basis for
the ZigBee and MiWi specifications.
MCS™ (Megabyte Code Support)
The capability in the Dynamic C version
10 development environment that
enables designers to use over 1 MB of
SRAM for shared code and data.
Operator Interface
A graphical interface to a specialized
computer (DCS, PLC or PAC) used in
an embedded system, such as on the
factory floor, or built into a ruggedized
terminal. It provides a remote interface
to the push buttons, switches and
gauges found on the equipment itself.
An operator interface may not offer
the rich graphics and flexibility of a
Windows-based interface.
RabbitCore® Module
Compact, Rabbit microprocessor
based board that mounts directly
onto a user-designed motherboard and
act as the controlling microprocessor
for the system.
PRODUCT CATALOG | 39
GLOSSARY
RabbitNet™
Point-to-point synchronous protocol
developed by Rabbit to connect
peripheral cards to a master. The signals
themselves are differential RS-422,
which are series-terminated at the
source. Peripheral cards and masters
connect using standard 8-conductor
CAT 5/6 Ethernet cables into RJ-45
female connectors.
Rabbit RIO®
A device from Rabbit that interfaces to
almost any microprocessor to add I/O
connections and features, such as PWM
functionality.
nodes on a network. The name SAMBA
comes from inserting one vowel, twice,
into the name of the standard protocol
used by the Microsoft Windows network
file system, “SMB” (Server Message Block).
RJ-45 (Registered Jack-45)
A telephone connector that holds up
to eight wires. RJ-45 plugs and sockets
are used in Ethernet and Token Ring
Type 3 devices.
SNMP (Simple Network Management
Protocol)
Consists of a set of standards for network
management, including an Application
Layer protocol, a database and a set of
data objects.
RS-232 (Recommended Standard-232)
A TIA/EIA standard for serial transmission
between computers and peripheral
devices (modem, mouse, etc.). Using a
25-pin DB-25 or 9-pin DB-9 connector, its
normal cable limitation of 50 feet can be
extended to several hundred feet with
high-quality cable.
RabbitWeb™
Consists of enhancements to our
Dynamic C compiler, and extensions to
our embedded HTTP server, to enable
the development of HTML forms for web
pages that interface with C variables in
embedded networked applications.
RF (Radio Frequency) Module
A packaged semiconductor device,
including an antenna, used as a
wireless communication port for
either a ZigBee connection or an
IEEE 802.15.4 connection.
RFU (Rabbit Field Utility)
The utility allows binary image files
generated by Dynamic C to be loaded
to Rabbit targets without Dynamic C.
40 | rabbit.com
RS-422 (Recommended Standard-422)
A TIA/EIA standard for serial interfaces
that extends distances and speeds
beyond RS-232. RS-422 is a balanced
system requiring more wire pairs than its
RS-423 counterpart and is intended for
use in multipoint lines. Both use either a
37-pin connector defined by RS-449 or a
25-pin connector defined by RS-530.
RTOS (Real-Time Operating System)
A master control program that can
provide immediate response to input
signals and transactions.
Smart Star™
Rabbit’s backplane based modular and
expandable embedded control system
designed for demanding real-time
control and data acquisition applications.
SMB™ (SAMBA)
An application-level protocol used
primarily to provide shared access
to files, printers, serial ports, and
miscellaneous communications between
SSL (Secure Sockets Layer)
A cryptographic protocol that provides
secure communications on the Internet.
10Base-T
An Ethernet port that supports 10 Mbps.
10/100Base-T
A 10/100 Ethernet port that supports
two speeds: 10 Mbps (10Base-T) and
100 Mbps (100Base-T).
TLS (Transport Layer Security)
A cryptographic protocol, similar to SSL,
that provides secure communications
on the Internet and came after the
development of SSL.
Wi-Fi® (Wireless-Fidelity)
A logo from the Wi-Fi Alliance that
certifies network devices comply
with the IEEE 802.11 wireless Ethernet
standards. In the early 2000s,
Wi-Fi/802.11 became widely used
(initially 802.11b, then 802.11g), and
within a short time, all laptops and
other handheld devices came with
Wi-Fi built in.
ZigBee®
A wireless network used for home,
building and industrial control. It
conforms to the IEEE 802.15.4 wireless
standard for low-cost, low-power
networks.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement