Sapling | NTP 7000 Series | Bogen IP Clock System - Bogen Communications International Inc.

50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 Fax: 201-934-9832
www.bogen.com
54-9289-25B 1010
© 2010 Bogen Communications, Inc.
Specifications subject to change without notice.
Bogen IP
Clock System
IP System Description
Bogen’s IP Clock System is the perfect choice for a modern, state-of-the-art system with accurate
timekeeping. Utilizing the Power over Ethernet protocol, each clock can receive power and data
directly from an Ethernet cable, eliminating the need for excess wiring.
Bogen’s IP Clock System contains some amazing features such as:
• IP Monitor Software - Supervise the entire clock system or make system-wide changes using
this simple PC program.
• Built-in Web Interface - Each clock has a web interface built right in, allowing the user to
set features such as 12/24 hour mode (digital clocks only), time zone offset, domestic and
international Daylight Saving Time, etc.
• E-mail Alerts - Get notification of any power failures, major time changes, NTP/SNTP server
synchronization issues, display faults or mechanical failures all through e-mail.
• Server Synchronization Redundancy - Store up to 10 internal or external NTP/SNTP server
addresses to ensure synchronization in the event that one of the servers fails to communicate.
• Energy Efficient - Set the digital IP clocks to dim or turn off the display at a scheduled time for
energy efficiency.
With all of these features available, Bogen’s IP Clock System is the perfect solution for your
timekeeping needs.
IP Products
BCMA Series NTP Server
Bogen’s new BCMA Series NTP/SNTP Server is available in both a 7000 and 8000 version. The 8000 Series
comes fully equipped with a crisp LED readout and a backlit two line LCD display. Programming the
BCMA 8000 with up to 800 events is easy, thanks to the 2x8 rubber tactile keypad. The BCMA 7000 Series
features a bright LED display with two push buttons for simple programming.
Standard Features:
• LED display for a clear, accurate
readout
• Send NTP time out to any device
• Two line, backlit LCD display with 20
characters per line and a 2x8 rubber
tactile keypad (BCMA 8000 only)
• RJ45 input for synchronization to any
(S)NTP server
• Interfaces with other systems
• 12 or 24 hour mode
• Automatic biannual Daylight Saving
Time changes (domestic and international)
BCMA Series Options:
• GPS input for UTC synchronization
• Wireless transmitter/repeater for correction of Bogen wireless clocks
• Four or eight auxiliary relays with 800
event capability (BCMA 8000 only)
• Countdown feature (BCMA 8000 option);
Digital clocks will count down a preset
amount of time when the relay
is activated
BCBP Digital and BCAP Analog IP Clocks
IP Monitor Software
Rolling out system-wide changes to all clocks in
your facility is simple with Bogen’s Clock Monitor
program. This easy-to-use PC program will display
all of the clocks configured to the clock network
and will give you the capability to send out a
preset configuration to the entire system, saving
you from setting each clock individually.
The monitor program features a simple
messaging feature that allows for sending
numeric messages to all of the clocks or just
a selected few. The IP digital clocks can be
manually set to count down from any time that is
entered into the Monitor program. The Monitor
program also offers a simple way to control any
specific clock in the system. Need to adjust a
digital IP clock to go to a specific time zone or
set a specific clock to be in military time? No
problem. Just locate the clock in the Monitor
program and double click on it to open
its web interface.
Bogen’s IP analog and digital clocks are some of the most technologically advanced clocks in the
industry. Each clock can be powered using the Power over Ethernet protocol and has a variety of
features that give the user maximum flexibility for almost any application.
Standard Features:
• Available in four different voltage models
• Power over Ethernet (802.3af protocol)
• 24 VAC
• 110 VAC
• 220 VAC
• Extremely intuitive web interface built in
• Control all of your settings from brightness to
Daylight Saving Time through an easy-to-use
web interface
• Monitor your entire clock system
• View the status of your clock to ensure
communication
• Edit a specific clock’s settings or apply settings
to the entire clock system from one location
• Automatic e-mail generation to alert the user of
any errors, power failures or time changes
• Made in the U.S.A.
BCAP Series Features:
• Smooth surface metal case or smooth surface ABS
plastic case
• Side molded polycarbonate crystal
• BCAP Series offered in 12”and 16” round models
BCBP Series Features:
• BCBP Series offered in 2.5”or 4” high characters
in 4 or 6 digit displays
• Countdown feature for displaying time between
classes or breaks
• Elapsed timer capabilities with Bogen’s Control Box
• 12 or 24 hour display
• Configurable alternating time/date in both American and European formats
• Two levels of adjustable brightness
IP System Description
Bogen’s IP Clock System is the perfect choice for a modern, state-of-the-art system with accurate
timekeeping. Utilizing the Power over Ethernet protocol, each clock can receive power and data
directly from an Ethernet cable, eliminating the need for excess wiring.
Bogen’s IP Clock System contains some amazing features such as:
• IP Monitor Software - Supervise the entire clock system or make system-wide changes using
this simple PC program.
• Built-in Web Interface - Each clock has a web interface built right in, allowing the user to
set features such as 12/24 hour mode (digital clocks only), time zone offset, domestic and
international Daylight Saving Time, etc.
• E-mail Alerts - Get notification of any power failures, major time changes, NTP/SNTP server
synchronization issues, display faults or mechanical failures all through e-mail.
• Server Synchronization Redundancy - Store up to 10 internal or external NTP/SNTP server
addresses to ensure synchronization in the event that one of the servers fails to communicate.
• Energy Efficient - Set the digital IP clocks to dim or turn off the display at a scheduled time for
energy efficiency.
With all of these features available, Bogen’s IP Clock System is the perfect solution for your
timekeeping needs.
IP Products
BCMA Series NTP Server
Bogen’s new BCMA Series NTP/SNTP Server is available in both a 7000 and 8000 version. The 8000 Series
comes fully equipped with a crisp LED readout and a backlit two line LCD display. Programming the
BCMA 8000 with up to 800 events is easy, thanks to the 2x8 rubber tactile keypad. The BCMA 7000 Series
features a bright LED display with two push buttons for simple programming.
Standard Features:
• LED display for a clear, accurate
readout
• Send NTP time out to any device
• Two line, backlit LCD display with 20
characters per line and a 2x8 rubber
tactile keypad (BCMA 8000 only)
• RJ45 input for synchronization to any
(S)NTP server
• Interfaces with other systems
• 12 or 24 hour mode
• Automatic biannual Daylight Saving
Time changes (domestic and international)
BCMA Series Options:
• GPS input for UTC synchronization
• Wireless transmitter/repeater for correction of Bogen wireless clocks
• Four or eight auxiliary relays with 800
event capability (BCMA 8000 only)
• Countdown feature (BCMA 8000 option);
Digital clocks will count down a preset
amount of time when the relay
is activated
BCBP Digital and BCAP Analog IP Clocks
IP Monitor Software
Rolling out system-wide changes to all clocks in
your facility is simple with Bogen’s Clock Monitor
program. This easy-to-use PC program will display
all of the clocks configured to the clock network
and will give you the capability to send out a
preset configuration to the entire system, saving
you from setting each clock individually.
The monitor program features a simple
messaging feature that allows for sending
numeric messages to all of the clocks or just
a selected few. The IP digital clocks can be
manually set to count down from any time that is
entered into the Monitor program. The Monitor
program also offers a simple way to control any
specific clock in the system. Need to adjust a
digital IP clock to go to a specific time zone or
set a specific clock to be in military time? No
problem. Just locate the clock in the Monitor
program and double click on it to open
its web interface.
Bogen’s IP analog and digital clocks are some of the most technologically advanced clocks in the
industry. Each clock can be powered using the Power over Ethernet protocol and has a variety of
features that give the user maximum flexibility for almost any application.
Standard Features:
• Available in four different voltage models
• Power over Ethernet (802.3af protocol)
• 24 VAC
• 110 VAC
• 220 VAC
• Extremely intuitive web interface built in
• Control all of your settings from brightness to
Daylight Saving Time through an easy-to-use
web interface
• Monitor your entire clock system
• View the status of your clock to ensure
communication
• Edit a specific clock’s settings or apply settings
to the entire clock system from one location
• Automatic e-mail generation to alert the user of
any errors, power failures or time changes
• Made in the U.S.A.
BCAP Series Features:
• Smooth surface metal case or smooth surface ABS
plastic case
• Side molded polycarbonate crystal
• BCAP Series offered in 12”and 16” round models
BCBP Series Features:
• BCBP Series offered in 2.5”or 4” high characters
in 4 or 6 digit displays
• Countdown feature for displaying time between
classes or breaks
• Elapsed timer capabilities with Bogen’s Control Box
• 12 or 24 hour display
• Configurable alternating time/date in both American and European formats
• Two levels of adjustable brightness
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 Fax: 201-934-9832
www.bogen.com
54-9289-25B 1010
© 2010 Bogen Communications, Inc.
Specifications subject to change without notice.
Bogen IP
Clock System
Download PDF