42004-277B
Pub. 42004-277B
GAI-TRONICS® CORPORATION
A HUB BEL L C OMP ANY
Model 411A and 411A-EP
Speaker Mounting Bracket Assemblies
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 411A and 411A-EP Speaker Mounting Bracket Assemblies include the following
components:
Qty
Description
Figure ID #
1
Aluminum oval cover
3
1
Galvanized conduit pipe
4
1
Aluminum elbow
5
1
Bushing
6
1
Gasket for oval cover
7
1
Aluminum wall mounting bracket
9
1
Aluminum mounting bracket adapter
10
2
Hex nuts
11
2
Washers
12
2
Stainless steel screws
13
2
3/8-16 carriage bolt
14
1
Locknut
15
CAUTION
When using any explosion-proof (Div. 1) speaker or driver unit, explosion-proof fittings must be
used for electrical connection.
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
VISIT WWW .GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Model 411A and 411A-EP Speaker Mounting Bracket Assembly
Pub. 42004-277B
Page: 2 of 2
Figure 1. Speaker Mounting Details
Installation
Refer to Figure 1 for the location of the items with ID numbers.
1. Secure the wall mounting bracket (ID# 9) to the wall. Mounting hardware is not included.
2. Thread the cable bushing (ID# 6) to the mounting bracket adapter (ID# 10). Do not tighten the cable
bushing nut.
3. Thread the locknut (ID# 15) onto the ¾-inch male portion of the elbow (ID# 5).
4. Secure the speaker to the mounting bracket adapter (ID# 10) via the U-bracket supplied with the
speaker and the carriage bolts (ID# 14), nuts (ID# 11), and washers (ID# 12) supplied with the kit.
5. Thread the ¾-inch male end of the elbow (ID# 5) into the mounting bracket adapter (ID #10).
6. Thread the one end of the conduit pipe (ID# 4) into the elbow and the other end into the wall
mounting speaker bracket (ID# 9).
7. Feed the SO cord through the cable bushing and down the pipe assembly to the oval opening of the
wall mounting bracket for connection to the speaker/amplifier.
(Note: For speaker driver installation, refer to the publication supplied with the equipment.)
8. Tighten the cable bushing nut. See Note 1 in Figure 1.
NOTE
When using any explosion-proof (Div. 1) speaker or driver unit, the speaker
mounting assembly may be used only to support and orient the speaker. Explosion-proof
fittings must be used for electrical connections.
9. Secure the gasket (ID# 7) and the cover (ID# 3) using the screws provided (ID# 13).
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-277b.doc
01/03
Warranty
Equipment.
GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any
GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall
comply with the then-current product specifications and product literature, and if applicable, shall be fit
for the purpose specified in the agreed-upon quotation or proposal document. If (a) Seller’s goods prove
to be defective in workmanship and/or material under normal and proper usage, or unfit for the purpose
specified and agreed upon, and (b) Buyer’s claim is made within the warranty period set forth above,
Buyer may return such goods to GAI-Tronics’ nearest depot repair facility, freight prepaid, at which time
they will be repaired or replaced, at Seller’s option, without charge to Buyer. Repair or replacement shall
be Buyer’s sole and exclusive remedy. The warranty period on any repaired or replacement equipment
shall be the greater of the ninety (90) day repair warranty or one (1) year from the date the original
equipment was shipped. In no event shall GAI-Tronics warranty obligations with respect to equipment
exceed 100% of the total cost of the equipment supplied hereunder. Buyer may also be entitled to the
manufacturer’s warranty on any third-party goods supplied by GAI-Tronics hereunder. The applicability
of any such third-party warranty will be determined by GAI-Tronics.
Services.
Any services GAI-Tronics provides hereunder, whether directly or through subcontractors,
shall be performed in accordance with the standard of care with which such services are normally
provided in the industry. If the services fail to meet the applicable industry standard, GAI-Tronics will
re-perform such services at no cost to buyer to correct said deficiency to Company's satisfaction provided
any and all issues are identified prior to the demobilization of the Contractor’s personnel from the work
site. Re-performance of services shall be Buyer’s sole and exclusive remedy, and in no event shall GAITronics warranty obligations with respect to services exceed 100% of the total cost of the services
provided hereunder.
Warranty Periods.
Every claim by Buyer alleging a defect in the goods and/or services provided
hereunder shall be deemed waived unless such claim is made in writing within the applicable warranty
periods as set forth above. Provided, however, that if the defect complained of is latent and not
discoverable within the above warranty periods, every claim arising on account of such latent defect shall
be deemed waived unless it is made in writing within a reasonable time after such latent defect is or
should have been discovered by Buyer.
Limitations / Exclusions.
The warranties herein shall not apply to, and GAI-Tronics shall not be
responsible for, any damage to the goods or failure of the services supplied hereunder, to the extent
caused by Buyer’s neglect, failure to follow operational and maintenance procedures provided with the
equipment, or the use of technicians not specifically authorized by GAI-Tronics to maintain or service the
equipment. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE IN LIEU OF AND
EXCLUDE ALL OTHER WARRANTIES AND REMEDIES, WHETHER EXPRESS OR IMPLIED BY
OPERATION OF LAW OR OTHERWISE, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Return Policy
If the equipment requires service, contact your Regional Service Center for a return authorization number
(RA#). Equipment should be shipped prepaid to GAI-Tronics with a return authorization number and a
purchase order number. If the equipment is under warranty, repairs or a replacement will be made in
accordance with the warranty policy set forth above. Please include a written explanation of all defects to
assist our technicians in their troubleshooting efforts.
Call 800-492-1212 (inside the USA) or 610-777-1374 (outside the USA) for help identifying the
Regional Service Center closest to you.
(Rev. 10/06)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement