Eizo | DURAVISION FDX1001 | User`s manual | Eizo DURAVISION FDX1001 User`s manual

重要
ご使用前には必ず本取扱説明書をよくお読みになり、正しくお使いくださ
い。この取扱説明書は大切に保管してください。
Important
Please read this User’s Manual carefully to familiarize yourself with safe and
effective usage. Please retain this manual for future reference.
重要事项
请仔细阅读用户手册,掌握如何安全、有效地使用本产品。请保留本手册,
以备日后参考。
SAFETY SYMBOLS
This manual and this product use the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage.
Indicates an attention to be required.
Indicates a prohibited action.
Using the special functions, such as screen size change (ex. changing the horizontal and vertical ratio of images input)
for commercial purposes or for the purpose of showing in public may violate copyright laws.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
Apple, ColorSync, eMac, iBook, iMac, iPad, Mac, MacBook, Macintosh, Mac OS, PowerBook, and QuickTime are registered trademarks
of Apple Inc.
Windows, Windows Media, Windows Vista, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United
States and other countries.
VESA is a registered trademark of Video Electronics Standards Association.
NEC is a registered trademark of NEC Corporation.
PC-9801 and PC-9821 are trademarks of NEC Corporation.
EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor, and ScreenManager are
registered trademarks of EIZO Corporation in Japan and other countries.
All other company and product names are trademarks or registered trademarks of their respective owners.
2
PRECAUTIONS
IMPORTANT
• This product is intended to be used with an industrial device designed to build industrial systems.
-- Transportation systems (Ship, aircraft, train, automobile, etc.)
-- Safety devices (Disaster prevention system, security control system, etc.)
-- Equipment with direct effect on human life (Life support systems, Medical equipment or devices used in the operating room, etc.)
-- Nuclear energy control devices (Nuclear energy control systems, security control systems of nuclear facilities,
etc.)
-- Main line devices (Operation control for transportation, control systems specific to aircrafts, etc.)
• To ensure personal safety and proper maintenance, please read this section.
WARNING
This product is intended to be housed in an enclosure. Do not use the bare monitor
separately.
Attempting to use a malfunctioning unit may result in electric shock, or equipment damage.
If the unit begins to emit smoke, smells like something is burning, or makes strange
noises, disconnect all power connections immediately and contact your dealer for
advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in fire, electric
shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet
may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet,
unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again.
Use the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be affected
by strong vibration or shock.
• Do not place in a dusty or humid environment.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inflammable gas environment.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part
of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical
symptoms result, please consult your doctor.
3
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is
dangerous. It may result in injury.
Do not install the unit in a closed space.
If the inerior becomes hot, it may result in fire, electric shock or damage.
4
Notice for this monitor
This product may not be covered by warranty for uses other than those described in this manual.
Only use optional products manufactured or specified by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
(Refer to “Cleaning” on the next page.)
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.99% or higher.
The backlight of the LCD panel has a fixed lifetime. When the screen becomes dark or begins to flicker, please contact
your local EIZO representative.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference
patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure
marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt to
brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the
dew condensation disappears, otherwise it may cause some damage to the monitor.
5
Cleaning
ATTENTION
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the panel, and
also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the panel.
NOTE
• The optional ScreenCleaner is recommended for cleaning the panel surface.
If necessary, the stains on the panel surface can be removed by moistening part of a soft cloth with water.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor
according to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
6
CONTENTS
Cover
............................................................. 1
PRECAUTIONS................................................. 3
Notice for this monitor............................................... 5
CONTENTS............................................................. 7
Chapter 1 Introduction........................................ 8
1-1. Features............................................................... 8
1-2. Package Contents............................................... 8
Chapter 2 Assembly............................................ 9
Chapter 3 Settings and Adjustments............... 14
3-1. Buttons............................................................... 14
3-2. Basic Operation and Functions....................... 15
Chapter 4 Troubleshooting............................... 18
Chapter 5 Reference.......................................... 19
5-1. Specifications.................................................... 19
5-2. Glossary............................................................. 22
5-3. Preset Timing..................................................... 23
LIMITED WARRANTY........................................... 24
CONTENTS
7
Chapter 1
Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• FDX1001/FDV1001: 10.4-inch screen, FDX1201: 12.1-inch screen
• Resolution
- FDX1001/FDX1201: XGA (1024 × 768) display compliant
- FDV1001: VGA (640 × 480) display compliant
• Maximum brightness
FDX1001: Chassis mount type 600 cd/m2 / Panel mount type 520 cd/m2
FDV1001: Chassis mount type 450 cd/m2 / Panel mount type 390 cd/m2
FDX1201: Chassis mount type 1000 cd/m2 / Panel mount type 870 cd/m2
• LED backlight LCD panel
The LED backlight provides better power efficiency and reduced power consumption compared to existing
fluorescent backlight LCD panels.
No mercury, a hazardous substance, is used.
• Analog signal support
PC signal: D-Sub mini 15 pin connector × 1
- FDX1001/FDX1201: Horizontal scanning frequency 24 kHz - 50 kHz,
Vertical scanning frequency 55 Hz - 75 Hz
- FDV1001: Horizontal scanning frequency 24 kHz - 32 kHz
Vertical scanning frequency 56 Hz - 70.5 Hz
Video signal: S-Video/ Video input connector × 1
- Applicable Format NTSC, PAL, SECAM
• Crosshair display function
Displays lines (Fine, Circle or Broken Line) as a reference for the position of the image displayed on the monitor.
(page 17)
• Video aspect function
Alters the display range of the input image (overscan). (page 17)
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
NOTE
• Please retain the packing materials for future transport of the monitor.
• LCD Monitor
• User’s Manual (Limited Warranty included)
• Cable Tie
• Mounting Screws (M4 × 12 mm): 4 pcs.
• Metal Panel Fittings: 4 pcs. (Panel mount type only)
8
Chapter 1 Introduction
Chapter 2
Assembly
ATTENTION
• Before mounting the monitor into the enclosure, please perform all settings and adjustments. For information on how to
apply settings and adjustments, please refer to “Chapter 3 Settings and Adjustments”.
Chassis mount type
● Exterior view
FDX1001 / FDV1001
25 25 (0.98)
(0.98)
100±0.5
(3.9±0.02)
25
(0.98)
40 (1.57)
19 (0.75)
19 (0.75)
100 (3.9)
10 (0.39)
5 (0.20)
86 (3.39)
96 (3.78)
115 (4.5)
(34 (1.34))
M4 (VESA mounting holes)
5 (0.20)
262±1 (10.3±0.04)
86 (3.39)
100 (3.9)
24 (0.94)
38 (1.50)
(28 (1.1))
Button extension connector
Connector specifications: see *2 in the next page
130 (5.1)
272±1 (10.7±0.04)
215.4 (8.5)
DC power terminal block
Power specifications: see *1 in the next page
75 (2.95)
10 (0.39)
161.8 (6.4)
100 (3.9)
215 (8.5)
(28 (1.1))
252 (9.9)
233 (9.2)
1 (0.04)
17 (0.67) 24 (0.94)
10 (0.39)
10 (0.39)
41 (1.61) 1 (0.04)
unit : mm (inch)
10 (0.39)
Φ4 (0.16)
(Enclosure mounting holes)
Video input connector
S-Video input connector
Power jack(DC-IN)
(For use with an EIZO AC adapter only)
D-Sub mini 15-pin connector
Chapter 2 Assembly
9
FDX1201
293 (11.5)
10.5 (0.41)
10 (0.39)
272 (10.7)
10.5 (0.41)
21.5 (0.85)
10 (0.39)
46 (1.81) 1 (0.04)
unit : mm (inch)
Button extension connector
Connector specifications: see *2 below
M4 (VESA mounting holes)
10 (0.39)
25
(0.98)
52 (2.05)
Power jack(DC-IN)
(For use with an EIZO AC adapter only)
Video input connector
S-Video input connector
*1
D-Sub mini 15-pin connector
DC power terminal block
Connector Pin Assignment
Pin No.
1
2
1
2
3
3
*
*2
10 (0.39)
Φ4 (0.16)
(Enclosure mounting holes)
Power sequencing
Signal
DC12V
DC12V
DET*
Ground
Not connected
10V
10V
5V
t1
t1 < 50ms
30ms < t2
t2
Button extension connector : S3B-PH-SM4-TB(LF)(SN) (JST)
Connector Pin Assignment
Pin No.
1
2
3
Signal
KEY0
KEY1
Ground
● How to assemble
1. Fasten screws through the mounting holes shown in the figure above (4 each on the left and
right sides) into the enclosure.
ATTENTION
• Please prepare screws that have a diameter of 3 mm and are suitable for use with the enclosure. (Screws are not
included with the monitor.)
10
Chapter 2 Assembly
25
(0.98)
100±0.5 (3.9)
100 (3.9)
108 (4.3)
34.5 (1.36)
184.3 (7.3)
127 (5.0)
116 (4.6)
243 (9.6)
37.5 (1.48)
146 (5.7)
DC power terminal block
Power specifications: see *1 below
33.4 (1.31)
86.5 (3.41)
313 (12.3)
245.8 (9.7)
33.4 (1.31)
302.6±1 (11.9)
291 (11.5)
100 (3.9)
24 (0.94)
Panel mount type
● Exterior view
FDX1001 / FDV1001
35 (1.38)
Max.16 (0.63)
92 (3.62)
100 (3.9)
100 (3.9)
24 (0.94)
M4 (VESA mounting holes)
19 (0.75)
113 (4.4)
219±0.5 (8.6±0.02)
Max.17 (0.67)
Max.17 (0.67)
(Panel opening dimensions)
16 (0.63)
92 (3.62)
217 (8.5)
11 (0.43)
38 (1.50)
77 (3.03)
116 (4.6)
160 (6.3)
248 (9.8)
52 (2.05)
132 (5.2)
Max.16
257±0.5 (10.1±0.02)
(0.63) (Panel opening dimensions)
DC power terminal block
Power specifications:
see *1 in the next page
16 (0.63)
35 (1.38)
Button extension connector
Connector specifications: see *2 in the next page
130 (5.1)
283 (11.1)
213 (8.4)
18 (0.71) 24 (0.94)
15 (0.59)
10 (0.39)
36 (1.42)
35 (1.38)
253 (10)
233 (9.2)
3 (0.12) 42 (1.65)
1 (0.04)
45 (1.77)
unit : mm (inch)
15 (0.59)
10 (0.39)
Power jack(DC-IN)
(For use with an EIZO AC adapter only)
S-Video input connector D-Sub mini 15-pin connector
Video input connector
FDX1201
Max.17 (0.67)
245.5±0.5 (9.7±0.02)
(Panel opening dimensions)
100 (3.9)
Max.16 (0.63)
Max.16 (0.63)
M4 (VESA mounting holes)
19 (0.75)
298±0.5 (11.7±0.02)
Max.16 (0.63) (Panel opening dimensions)
DC power terminal block
100 (3.9)
Power specifications:
see *1 in the next page
24 (0.94)
37.5 (1.48)
146 (5.7)
245 (9.6)
38.8 (1.53)
Button extension connector
Connector specifications: see *2 in the next page
87 (3.43)
17 (0.67)
325 (12.8)
247.4 (9.7)
16 (0.63)
10.7 (0.42)
50.8 (2.00)
143.8 (5.7)
38.8 (1.53)
271.6 (10.7)
1 (0.04)
46 (1.81)
293 (11.5)
10.7 (0.42)
186 (7.3)
39.2 (1.54)
132.2 (5.2)
(3 (0.12))
276 (10.9)
16 (0.63)
24.5 (0.96)
unit : mm (inch)
Video input connector
S-Video input connector
Power jack (DC-IN)
(For use with an EIZO AC adapter only)
D-Sub mini 15-pin connector
Chapter 2 Assembly
11
*1
DC power terminal block
Connector Pin Assignment
Pin No.
1
2
1
2
3
3
*
*2
Power sequencing
Signal
DC12V
DC12V
DET*
Ground
10V
10V
5V
Not connected
t1
t1 < 50ms
30ms < t2
t2
Button extension connector : S3B-PH-SM4-TB(LF)(SN) (JST)
Connector Pin Assignment
Pin No.
1
2
3
Signal
KEY0
KEY1
Ground
● How to assemble
ATTENTION
• Since the panel mounted on the monitor is tightened with a metal panel fitting screw, please make the selection
considering the following points.
- Flat
- A thickness of 5 mm
- A structure having the strength to support fixing with the screw.
1. Insert the monitor into the mount opening from the front.
The dimensions of a fitting opening are the “Panel opening dimensions” shown in the figure above.
FDX1001/FDV1001/FDX1201
Panel
Mount opening
FDX1001/FDV1001 : 257±0.5mm×219±0.5mm
FDX1201 : 298±0.5mm×245.5±0.5mm
(Panel opening dimension)
12
Chapter 2 Assembly
2. Fit the included metal panel fittings onto the monitor (4 locations).
Metal panel fitting
3. Tighten the screws of the metal panel fittings with a prescribed torque of 0.6-0.7 N·m.
Chapter 2 Assembly
13
Chapter 3
Settings and Adjustments
3-1. Buttons
Chassis mount type
Top
1
2
3
4
5
1
2
3
4
5
Panel mount type
Top
1
button
2
button
3
4
Switches the input signal.
button
button
5 Power indicator
14
Displays the Setting menu, fixes the setting or adjustment items on each menu, and saves
the setting or adjustment results.
• Used to select the setting or adjustment items, or to increase or decrease the adjustment
values on each menu.
• When the settings menu is not displayed, pressing
or
switches between displaying
and not displaying the crosshair.
Turns the power on or off.
Indicates monitor’s operation status.
Blue: Operating
Orange: Power off
Chapter 3 Settings and Adjustments
3-2. Basic Operation and Functions
Basic operation of Setting menu
1 Displaying Setting Menu
Press
.
2 Setting/Adjusting
3 Exiting
Choose [Exit] with
or
, and press
.
NOTE
• Keeping
pressed for 2 seconds will also exit the Setting menu.
Chapter 3 Settings and Adjustments
15
Functions
The settings adjustable in the Setting menu are as shown below. The availability of items depends on the
input signal.
√ : Configurable ― : Not configurable
Tab
Setting / adjustable item
Color
Setting /
adjustable value
PC
Video
Setting / adjustable content
Brightness
0 - 30
√
√
Adjusts the brightness of the backlight.
Contrast
0 - 30
√
√
Adjusts the contrast.
Black Level
0 - 30
√
√
Adjusts the image brightness.
Sharpness
Off/Low/High
―
√
Adjusts the image outlines.
Saturation
-30 - +30
―
√
Adjusts the saturation.
-30 - +30
―
√
Adjusts the hue.
Hue
*1
PC Settings
Clock
√
―
Adjust this when vertical bars appear.
Phase
√
―
Adjust this when the screen appears to
flicker or blur.
Position
√
―
Adjust this when the display positioning
is misaligned.
Range Adjustment
√
―
Provides automatic adjustment when you
want every color gradients displayed.
Color Mode*2 1/2/3
√
―
√
―
Select Color Mode (1/2/3) to adjust the
colors of red, green and blue in several
modes.
√
―
Resets the state adjusted with [PC
Settings] to the factory default.
√
√
Resets the state adjusted with the [Color]
tab to the factory default (excluding [PC
Settings]).
Red/
Green/
Blue
0 - 128
Reset
Reset
*1
This setting becomes available when a PC is connected to the monitor. Please adjust with a PC when display and color adjustments are required.
*2
Perform [Range Adjustment] before adjusting Color Mode.
16
Chapter 3 Settings and Adjustments
Tab
Setting /
Setting /
adjustable item adjustable value
Others Video Aspect
Normal/100%
PC
Video
―
√
Setting / adjustable content
Configures the display range of the input image
(overscan).
“Normal” :
Displays the input image
with the outmost parts
slightly cut off.
*This is how display devices
normally display images.
“100%”
:
Displays most of the input
image.
*Because a part of the
image which normally
gets cut off is displayed as
well, noise may be visible
around the outmost parts,
depending on the input
signal.
Power Save
Disable/Enable
√
√
Automatically turns off the power supply if no video
signal has been received for 15 minutes during PC or
video viewing.
Reverse
Off/On
√
√
Displays the image upside down (180 degree rotation).
Crosshair
Off/Fine/Circle/
Broken Line
√
√
Displays a crosshair as a reference for the position of
the image.
“Fine”
“Circle”
“Broken Line”
(When the settings menu is not displayed, pressing
or
switches between displaying and not displaying
the crosshair.)
Color
When “Fine” is
selected:
Black/White/
Red/Green
When “Circle”
or “Broken Line”
is selected:
Black/White
√
√
Configures the color of the crosshair.
Width
Narrow/Wide
√
√
Configures the thickness of the crosshair’s lines.
Off/On
√
√
Sets button press sounds and connection error sounds
to on or off.
Beep
• Short beep
: - When
,
or
is pressed.
- When an item is selected with
.
- When a maximum or minimum
or .
value is set with
• Long beep
: When registration is performed
with .
• 2 short beeps : When the Setting menu is
displayed and
is pressed.
• 4 short beeps : - When there is no input signal.
- When a frequency out of the
specified range is received.
Language
Information
日本語 /English
√
√
Configures the displayed Setting menu and message
language.
√
√
Reviews the input signals, usage time and model name.
Chapter 3 Settings and Adjustments
17
Chapter 4
Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
Common
Problems
Possible cause and remedy
No picture
• Power indicator does not light.
• Check whether the power cord is connected correctly.
• If the problem persists, turn off the power, and then turn
it on again a few minutes later.
• Power indicator lights orange.
• Press
• Power indicator lights blue.
• Check whether the power of the connected device is
turned on.
• Switch the input signal.
• Set each adjusting value in [Brightness] and [Contrast] to
higher level. (see page 16)
.
The screen is too bright or too dark.
• Adjust using [Brightness] or [Contrast]. (The LCD
monitor backlight has a fixed life span. When the screen
becomes dark or begins to flicker, contact your local
dealer.) (see page 16)
Green/red/blue/white dots or defective
dots remain on the screen.
• This is due to LCD panel characteristics and is not a
failure.
Interference patterns or pressure marks
remain on the screen.
• Leave the monitor with a white or black screen. The
symptom may disappear.
Afterimages appear.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
• When displaying the same image for extended periods of
time, please set up the screen saver and/or make use of
the power saving function.
When displaying on a PC screen
Problems
Possible cause and remedy
The message below appears.
• This message appears when no signal
is input.
PC
No
Signal
• The message shows that the input
signal is out of the specified frequency
range.
PC
Signal
Error
18
• This message appears when the signal is not input
correctly even when the monitor functions properly.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Check whether the signal setting of your PC matches
the resolution and the vertical frequency settings for the
monitor. (see page 19, 20, 21) (Current input signal can
be checked in [Information].)
• Reboot the PC.
• Select an appropriate display mode using the graphics
board’s utility. Refer to the manual of the graphics board
for details.
Display position is incorrect.
• Adjust image position using [Position]. (see page 16)
Vertical bars appear on the screen or a
part of the image is flickering.
• Adjust using [Clock]. (see page 16)
Whole screen is flickering or blurring.
• Adjust using [Phase]. (see page 16)
Characters are blurred.
• This may occur when a non-complying high-resolution
signal is input. Check the PC settings and change the
resolution which complies with the monitor.
Chapter 4 Troubleshooting
Chapter 5
Reference
5-1. Specifications
FDX1001
LCD Panel
Size
10.4-inch (260 mm) TFT color LCD
Surface treatment
Chassis mount type: Anti-glare hard coating
Panel mount type: Anti-glare
Surface hardness
Chassis mount type: 3H
Panel mount type: 4H
Viewing angle
Horizontal 160°, Vertical 130° (CR : 10 or more)
Dot Pitch
0.2055 mm
Display Area (H × V)
210.4 mm × 157.8 mm
Resolution
1024 dots × 768 lines
Max. Display Color
Approx. 16.7 million colors
PC input
Horizontal Scan Frequency 24-50 kHz
Vertical Scan Frequency
55-75 Hz (Non-interlace)
Max. Dot Clock
65 MHz
Input Signal Connector
D-Sub mini 15-pin × 1
Input Signal (Sync)
Separate, TTL, positive / negative
Input Signal (Video)
Analog, Positive (0.7Vp-p/75Ω)
Max. Video Signal Memory 15 (preset : 13)
Video input
Plug and Play
VESA DDC 2B/EDID structure 1.3
Applicable Format
NTSC, PAL, SECAM
Input Signal Connector
S-Video DIN mini 4 pin/ Video Pin jack × 1
Input Signal Level
S-Video DIN mini 4 pin : Y 1.0Vp-p/75Ω, C 0.28Vp-p/75Ω
Video Pin jack : 1.0Vp-p/75Ω
Power Supply
12VDC±10%, 0.9 A
Power
Consumption
Screen Display On
11 W or less
Power Off
0.5 W or less
Dimensions
(Width) ×
(Height) ×
(Depth)
Chassis mount type
272 mm (10.7 inch) × 215 mm (8.5 inch) × 41 mm (1.61 inch)
(excluding the projection)
Panel mount type
283 mm (11.1 inch) × 248 mm (9.8 inch) × 45 mm (1.77 inch)
(excluding the projection)
Mass
Chassis mount type
Approx. 1.9 kg (4.2 lbs.)
Panel mount type
Approx. 2.3 kg (5.1 lbs.)
Environmental Temperature
Conditions
[Operating temperature] 0 °C - 50 °C (32 °F - 122 °F)
[Storage temperature] -20 °C - 60 °C (-4 °F - 140 °F)
Humidity
[Operating humidity]
20% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no
condensation)
[Storage humidity]
10% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no
condensation)
Pressure
[Operating] 700 hPa - 1060 hPa
[Storage] 200 hPa - 1060 hPa
Chapter 5 Reference
19
FDV1001
LCD Panel
Size
10.4-inch (260 mm) TFT color LCD
Surface treatment
Chassis mount type: Anti-glare hard coating
Panel mount type: Anti-glare
Surface hardness
Chassis mount type: 3H
Panel mount type: 4H
Viewing angle
Horizontal 160°, Vertical 140° (CR : 10 or more)
Dot Pitch
0.33 mm
Display Area (H × V)
211.2 mm × 158.4 mm
Resolution
640 dots × 480 lines
Max. Display Color
Approx. 16.2 million colors
PC input
Horizontal Scan Frequency 24-32 kHz
Vertical Scan Frequency
56-70.5 Hz (Non-interlace)
Max. Dot Clock
31 MHz
Input Signal Connector
D-Sub mini 15-pin × 1
Input Signal (Sync)
Separate, TTL, positive / negative
Input Signal (Video)
Analog, Positive (0.7Vp-p/75Ω)
Max. Video Signal Memory 10 (preset : 8)
Video input
Plug and Play
VESA DDC 2B/EDID structure 1.3
Applicable Format
NTSC, PAL, SECAM
Input Signal Connector
S-Video DIN mini 4 pin/ Video Pin jack × 1
Input Signal Level
S-Video DIN mini 4 pin : Y 1.0Vp-p/75Ω, C 0.28Vp-p/75Ω
Video Pin jack : 1.0Vp-p/75Ω
Power Supply
12VDC±10%, 0.7 A
Power
Consumption
Screen Display On
9 W or less
Power Off
0.5 W or less
Dimensions
(Width) ×
(Height) ×
(Depth)
Chassis mount type
272 mm (10.7 inch) × 215 mm (8.5 inch) × 41 mm (1.61 inch)
(excluding the projection)
Panel mount type
283 mm (11.1 inch) × 248 mm (9.8 inch) × 45 mm (1.77 inch)
(excluding the projection)
Mass
Chassis mount type
Approx. 1.7 kg (3.7 lbs.)
Panel mount type
Approx. 2.1 kg (4.6 lbs.)
Environmental Temperature
Conditions
20
Chapter 5 Reference
[Operating temperature] 0 °C - 50 °C (32 °F - 122 °F)
[Storage temperature] -20 °C - 60 °C (-4 °F - 140 °F)
Humidity
[Operating humidity]
20% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no
condensation)
[Storage humidity]
10% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no
condensation)
Pressure
[Operating] 700 hPa - 1060 hPa
[Storage] 200 hPa - 1060 hPa
FDX1201
LCD Panel
Size
12.1-inch (310 mm) TFT color LCD
Surface treatment
Anti-glare
Surface hardness
Chassis mount type: 3H
Panel mount type: 4H
Viewing angle
Horizontal 160°, Vertical 140° (CR : 10 or more)
Dot Pitch
0.240 mm
Display Area (H × V)
245.76 mm × 184.32 mm
Resolution
1024 dots × 768 lines
Max. Display Color
Approx. 16.7 million colors
PC input
Horizontal Scan Frequency 24-50 kHz
Vertical Scan Frequency
55-75 Hz (Non-interlace)
Max. Dot Clock
65 MHz
Input Signal Connector
D-Sub mini 15-pin × 1
Input Signal (Sync)
Separate, TTL, positive / negative
Input Signal (Video)
Analog, Positive (0.7Vp-p/75Ω)
Max. Video Signal Memory 15 (preset : 13)
Video input
Plug and Play
VESA DDC 2B/EDID structure 1.3
Applicable Format
NTSC, PAL, SECAM
Input Signal Connector
S-Video DIN mini 4 pin/ Video Pin jack × 1
Input Signal Level
S-Video DIN mini 4 pin : Y 1.0Vp-p/75Ω, C 0.28Vp-p/75Ω
Video Pin jack : 1.0Vp-p/75Ω
Power Supply
12VDC±10%, 1.4 A
Power
Consumption
Screen Display On
17 W or less
Power Off
0.8 W or less
Dimensions
(Width) ×
(Height) ×
(Depth)
Chassis mount type
313 mm (12.3 inch) × 243 mm (9.6 inch) × 46 mm (1.81 inch)
(excluding the projection)
Panel mount type
325 mm (12.8 inch) ×276 mm (10.9 inch) × 46 mm (1.81 inch)
(excluding the projection)
Mass
Chassis mount type
Approx. 2.2 kg (4.9 lbs.)
Panel mount type
Approx. 2.8 kg (6.2 lbs.)
Environmental Temperature
Conditions
[Operating temperature] 0 °C - 50 °C (32 °F - 122 °F)
[Storage temperature] -20 °C - 60 °C (-4 °F - 140 °F)
Humidity
[Operating humidity]
20% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no
condensation)
[Storage humidity]
10% - 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no
condensation)
Pressure
[Operating] 700 hPa - 1060 hPa
[Storage] 200 hPa - 1060 hPa
Chapter 5 Reference
21
Connector Pin Assignment
• D-Sub mini 15-pin connector
3
4
5
10
15
9
1
2
8
7
6
14 13 12 11
Pin No.
1
Signal
Red video
Pin No.
6
Signal
Red video ground
Pin No.
11
Signal
NC*
2
Green video
7
Green video ground
12
Data (SDA)
3
Blue video
8
Blue video ground
13
H. Sync
4
NC*
9
NC*
14
V. Sync
5
Ground
10
Ground
15
Clock (SCL)
(NC*: No Connection)
5-2. Glossary
Afterimage
The Afterimage is particular to LCD monitors. When the monitor screen is left on for a long period without
use. The Afterimage can be removed gradually by changing the displayed image.
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics
system in use, when the analog input signal is converted to a digital signal for image display. This is called
clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is
made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted
correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation.
It is recommended that range adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This
monitor consists of 1024 (FDX1001/FDX1201) / 640 (FDV1001) horizontal pixels and 768 (FDX1001/
FDX1201) / 480 (FDV1001) vertical pixels.
At a resolution of 1024 × 768 (FDX1001/FDX1201) / 640 × 480 (FDV1001), all pixels are illuminated as
a full screen (1:1).
22
Chapter 5 Reference
5-3. Preset Timing
The following table shows the factory preset video timing of the PC.
ATTENTION
• Display position may be deviated depending on the PC connected, which may require screen adjustment using
Setting menu.
• If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen
display may still be incorrect even after the adjustment.
• When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the
Setting menu.
FDX1001/FDX1201
Resolution
Applicable
signal
Frequency
Horizontal :
kHz
31.47
Vertical :
Hz
70.09
Polarity
720 × 400
VGA TEXT
Dot clock :
MHz
28.33
Negative
Positive
640 × 480
VGA
25.18
31.47
59.94
Negative
Negative
640 × 480
VESA
31.50
37.86
72.81
Negative
Negative
640 × 480
VESA
31.50
37.50
75.00
Negative
Negative
800 × 600
VESA
36.00
35.16
56.25
Positive
Positive
800 × 600
VESA
40.00
37.88
60.32
Positive
Positive
800 × 600
VESA
50.00
48.08
72.19
Positive
Positive
800 × 600
VESA
49.50
46.88
75.00
Positive
Positive
1024 × 768
VESA
65.00
48.36
60.00
Negative
Negative
640 × 480
MAC
30.24
35.00
66.67
Negative
Negative
832 × 624
MAC
57.28
49.72
74.55
Negative
Negative
640 × 400
PC-9801
21.05
24.83
56.42
Negative
Negative
640 × 400
PC-9821 AP2
25.18
31.48
70.10
Negative
Negative
Resolution
Applicable
signal
720 × 400
VGA TEXT
Dot clock :
MHz
28.33
Frequency
Horizontal :
kHz
31.47
Vertical :
Hz
70.09
640 × 480
VGA
25.18
31.47
800 × 600
VESA
36.00
800 × 600
VESA
40.00
1024 × 768
VESA
65.00
Horizontal
Vertical
FDV1001
Polarity
Horizontal
Vertical
Negative
Positive
59.94
Negative
Negative
35.16
56.25
Positive
Positive
37.88
60.32
Positive
Positive
48.36
60.00
Negative
Negative
640 × 480
MAC
30.24
35.00
66.67
Negative
Negative
640 × 400
PC-9801
21.05
24.83
56.42
Negative
Negative
640 × 400
PC-9821 AP2
25.18
31.48
70.10
Negative
Negative
Chapter 5 Reference
23
LIMITED WARRANTY
EIZO Corporation (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the
“Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the
“Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product
specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
shall, at their sole discretion, either repair or replace the Product at no charge if the Original Purchaser becomes aware
within the Warranty Period (defined below) that the Product malfunctions or is damaged in the course of normal use of
the Product in accordance with the description in the instruction manual attached to the Product (hereinafter referred to
as the “User’s Manual”).
The period of this Warranty is two (2) years from the date of purchase of the Product (hereinafter referred to as the
“Warranty Period”). EIZO and Distributors shall bear no liability or obligation with regard to the Product in relation to the
Original Purchaser or any third parties other than as provided under this Warranty.
EIZO and Distributors will cease to hold or store any parts of the Product upon expiration of seven (7) years after the
production of such parts is discontinued. In repairing the monitor, EIZO and Distributors will use renewal parts which
comply with our QC standards.
The Warranty is valid only in the countries or territories where the Distributors are located. The Warranty does not restrict
any legal rights of the Original Purchaser.
Notwithstanding any other provision of this Warranty, EIZO and Distributors shall have no obligation under this Warranty
whatsoever in any of the cases as set forth below:
(a) Any defect of the Product caused by freight damage, modification, alteration, abuse, misuse, accident, incorrect
installation, disaster, faulty maintenance and/or improper repair by third party other than EIZO and Distributors;
(b) Any incompatibility of the Product due to possible technical innovations and/or regulations;
(c) Any deterioration of the sensor;
(d) Any deterioration of display performance caused by the deterioration of expendable parts such as the LCD panel
and/or backlight, etc. (e.g. changes in brightness, changes in brightness uniformity, changes in color, changes in
color uniformity, defects in pixels including burnt pixels, etc.);
(e) Any defect of the Product caused by external equipment;
(f) Any defect of the Product on which the original serial number has been altered or removed;
(g) Any defect of the Product caused by liquid leaking from battery;
(h) Any normal deterioration of the product, particularly that of consumables, accessories, and/or attachments (e.g.
batteries, buttons, rotating parts, remote control, cables, User’s Manual, etc.); and
(i) Any deformation, discoloration, and/or warp of the exterior of the product including that of the surface of the LCD
panel.
To obtain service under the Warranty, the Original Purchaser must deliver the Product, freight prepaid, in its original
package or other adequate package affording an equal degree of protection, assuming the risk of damage and/or loss
in transit, to the local Distributor. The Original Purchaser must present proof of purchase of the Product and the date of
such purchase when requesting services under the Warranty.
The Warranty Period for any replaced and/or repaired product under this Warranty shall expire at the end of the original
Warranty Period.
EIZO OR DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO, OR LOSS OF, DATA OR OTHER
INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY PRODUCT RETURNED TO EIZO OR
DISTRIBUTORS FOR REPAIR.
EIZO AND DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR IMPLIED, WITH RESPECT TO
THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
USE. IN NO EVENT SHALL EIZO OR DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY
LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE
PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN
IF EIZO OR DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION
ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL
PURCHASER. THE ESSENCE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND
DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES.
24
LIMITED WARRANTY
(For Japanese Market Only.)
この保証書は所定事項を記入して効力を発するものですから、必ずお買い上げ年月日・販売店・住所・電話番号の
記入をご確認ください。
保証規定
1. 本製品の取扱説明書、本体添付ラベルなどの注意書に従った使用状態で保証期間内に故障した場合、無料にて
故障箇所の修理または交換をさせていただきますので、保証書を添えてお買い上げの販売店またはEIZOサポー
トまでお申しつけください。
2. 保証期間内でも次のような場合には、有償修理とさせていただきます。 ● 保証書のご提示がない場合
● 保証書の所定事項が未記入、
または字句が書き換えられている場合
● 使用上の誤り、
または不当な修理や改造による故障及び損傷 ● お買い上げの後の輸送・移動・落下などによる故障及び損傷 ● 火災・地震・水害・落雷・その他の天災地変ならびに公害や異常電圧などの外部要因に起因する故障及び損傷
● 車両・船舶などのような強い振動や衝撃を受ける場所に搭載された場合に生じる故障及び損傷
● 電池の液漏れによる故障及び損傷
● 液晶パネル、
バックライトの経年劣化(輝度の変化、色の変化、輝度と色の均一性の変化、焼き付き、欠点の増加
など)
● センサーの経年劣化
● 外装品
(液晶パネルの表面を含む)の損傷、変色、劣化
● 付属品
(リモコン、
ケーブル、取扱説明書など)の交換
● 当社指定の消耗品
(電池、
スイッチ/ボタン/レバー類、回転部など)
● 技術革新などにより製品に互換性がなくなった場合
3. 保証書は日本国内においてのみ有効です。
This warranty is valid only in Japan.
4. 保証書は再発行いたしませんので紛失しないよう大切に保管してください。
* 保証書は、保証書に明示した期間、条件のもとにおいて無償修理をお約束するものです。なお、保証期間経過後
の修理についてご不明な場合はお買い上げの販売店またはEIZOサポートまでお問い合せください。
* 当社では、
この製品の補修用性能部品(製品の機能を維持するために必要な部品)
を、製品の製造終了後、
最低7年間保有しています。補修用性能部品の最低保有期間が経過した後も、故障箇所によっては修理可能な
場合がありますので、EIZOサポートにご相談ください。
〒924-8566 石川県白山市下柏野町 153 番地
153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan
Phone: +81 76 277 6792 Fax: +81 76 277 6793
http://www.eizo.co.jp
http://www.eizo.com
Copyright © 2011-2013 EIZO Corporation All rights reserved.
Helmut-Grashoff-Strasse 18, 41179 Mönchengladbach, Germany
Phone: +49 2161 8210210 Fax: +49 2161 8210150
中国苏州市苏州工业园区展业路8号中新科技工业坊5B
Phone: +86 512 6252 0100 Fax: +86 512 6252 1508
8th Edition-April, 2013
Printed in Japan.
00N0L591H1
(U.M-FDX1001-CPR-AL)
Download PDF