SL07 & SL10 Installation and Service Manual Version 3.1

SL07 & SL10 Installation and Service Manual Version 3.1
ISO9001:2000
Lic 14834
SAI Global Ltd
SL07 & SL10
Installation and Service Manual
Version 3.1
Table of Contents
Introduction
2
Operating Principle
3
Technology
3
SL07 Model
4
SL10 Model
6
Maintenance & Servicing
7
Flash Codes
8
Troubleshooting
14
Sealite Lantern Warranty
15
Introduction
Congratulations! By choosing to purchase a Sealite lantern you have become the owner of one of the
most advanced LED marine lanterns in the world.
Sealite Pty Ltd has been manufacturing lanterns for over 20 years, and particular care has been
taken to ensure your lantern gives years of service.
As a commitment to producing the highest quality products for our customers, Sealite has been
independently certified as complying with the requirements of ISO 9001:2000 quality management
system.
By taking a few moments to browse through this booklet, you will become familiar with the versatility
of your lantern, and be able to maximise its operating function.
Please remember to complete the Sealite warranty registration card accompanying your lantern.
2
Latest products and information available at www.sealite.com.au
Operating Principle
The SL07 and SL10 are designed to operate in conjunction with existing or purpose-built power
supplies (battery or mains connection).
The flasher unit has very low current requirements. A microprocessor drives an array of ultra bright
LED’s through a DC/DC converter, which enables the LED’s to operate within the manufacturer’s
specifications.
On darkness, the microprocessor will initiate a program check and after approximately 1 minute begin
flashing to the set code.
Technology
Electronics
Sealite employs leading in-house electronic engineers in the design and development of software and
related circuitry. All individual electronic components are sourced directly by Sealite procurement
staff ensuring that only the highest quality components are used in our products.
LED Technology
All marine lanterns use the latest advancements in LED (Light Emitting Diode) technology as a light
source. The major advantage of LED’s over traditional light sources is well established in that they
typically have an operational life in excess of 100,000 hours, resulting in substantial savings to
maintenance and servicing costs.
Precision Construction
Commitment to investing in the design and construction of injection-moulded parts including optic
lenses, light bases and a range of other components ensures that all Sealite products are of a
consistent and superior quality.
Optical Performance
Sealite manufactures a range of marine LED lenses moulded from multi-cavity dies. Complex shapes
such as the SL70 lens are a testament to the company’s superior in-house lens manufacturing
capabilities and outstanding optical performance.
Award-winning, Patented Technology
Several United States and Australian patent registrations are held on Sealite’s range of innovative
designs, with other regional patents pending in Canada, United Kingdom and Europe.
3
Latest products and information available at www.sealite.com.au
SL07 Model
The SL07 LED light fixture is designed to offer superior visibility and operate in conjunction with
existing or purpose-built power supplies. With a variable range of 1-4nm, a maintenance-free light
source, and choice of up to 256 user-adjustable flash codes, the SL07 is available in a number of
configurations, colours and cable lengths and is the preferred replacement for obsolete incandescent
lights.
An optional ON/OFF switch can be also installed on request (additional charges may apply).
See page 6 for Specifications Table.
Installation of SL07 Model
Lantern is activated by optional ON/OFF Switch, or connection of positive and negative wires to
battery or mains system. Flash setting needs to be set prior to activation.
1. Remove the marked flash adjustment bung from the base of the lantern and set rotary switches
to the required flash code (see ‘Selecting a Flash Code’, page 5).
2. Replace flash adjustment bung.
3. A sealed vent on the base allows air transfer without moisture intake, and should not be
disturbed.
4. Battery Connection: Connect “Battery Negative (-)” wire to negative terminal of battery, and
“Battery Positive (+)” wire to positive terminal of battery.
Mains Connection: Connect negative and then positive wires to 12volt power supply (ONLY).
5. To test place dark cover (towel or jacket) on top of light to activate sensor, light will come on.
6. Ensure that the unit is bolted to an even, flat surface.
Care must be taken to observe the polarity of each wire before they are connected.
4
Latest products and information available at www.sealite.com.au
Intensity Setting
Intensity options are available for the Sealite SL07 model, but must be preset during manufacturing.
Selecting a Flash Code- Rotary Switches A and B
All lanterns have 2 rotary switches marked A and B on the flasher unit (see below). Turning the small
arrows to the appropriate number or letter will set the code (see ‘Flash Code’ section, page 9). The
unit may take up to one minute to activate a new flash code. A comprehensive list of available flash
codes is listed on pages 9-15 of this manual.
Rotary Switches A and B
A
B
5
Latest products and information available at www.sealite.com.au
SL10 Model
The heavy-duty SL10 LED light fixture with a variable range of 1 to 4nm is designed to operate in
conjunction with existing or purpose-built power supplies, and offers maintenance-free service over a
wide range of environmental conditions. Available in a number of configurations, colours and cable
lengths, the SL10 is the perfect replacement for obsolete incandescent lights in extreme
environments.
SL07 and SL10 Specifications ·
Model
SL07-1.R
SL07-1.G
SL07-1.W
SL07-1.Y
SL10-1.R
SL10-1.G
SL10-1.W
SL10-1.Y
SL07-2.R
SL07-2.G
SL07-2.W
SL07-2.Y
SL10-2.R
SL10-2.G
SL10-2.W
SL10-2.Y
SL07-3.R
SL07-3.G
SL07-3.W
SL07-3.Y
SL10-3.R
SL10-3.G
SL10-3.W
SL10-3.Y
SL07-4.R
SL07-4.G
SL07-4.W
SL07-4.Y
SL10-4.R
SL10-4.G
SL10-4.W
SL10-4.Y
Description
Intensity
(peak)
Colour
No. LEDs
Power
Amp/hour
Voltage
1nm LED Light Head
1.5cd
1.5cd
1.3cd
1.4cd
Red
Green
White
Yellow
10
10
10
10
0.009
0.009
0.009
0.009
12v
12v
12v
12v
2nm LED Light Head
7cd
7cd
5cd
6cd
Red
Green
White
Yellow
10
10
10
10
0.035
0.035
0.035
0.035
12v
12v
12v
12v
3nm LED Light Head
23cd
23cd
17cd
19cd
Red
Green
White
Yellow
20
20
20
20
0.120
0.120
0.120
0.120
12v
12v
12v
12v
4nm LED Light Head
45cd
46cd
41cd
43cd
Red
Green
White
Yellow
20
20
20
20
0.220
0.220
0.220
0.220
12v
12v
12v
12v
· Specifications subject to change or variation without notice
6
Latest products and information available at www.sealite.com.au
Order Codes (for products in specifications table, page 6)
FX:
Fixed light on power-up.
FL:
Flashing or steady light on power-up. Excludes photodiode. 24hr operation. 256 IALA
adjustable flash rates.
FL-S:
Flashing or steady light on darkness. Includes photodiode for automatic darkness
activation. 256 IALA adjustable flash rates.
Eg. SL07-3.B-FL-S: denotes 3nm SL07 light head BLUE c/w adjustable flash rates and
photodiode.
Installation of SL10 Model
Lantern is activated by connection of positive and negative wires to battery or mains system. Intensity
and flash settings need to be set prior to activation.
1. Unscrew the two socket cap screws located at either side of the lantern and remove lens cover.
2. Remove internal flasher unit from within the lens cover.
3. The power and range settings of the lantern are adjusted by setting the DIP switches located on
the top of this internal flasher unit. Your lantern is normally set to maximum range (see ‘Selecting
an Intensity Setting’, page 8).
4. Set rotary switches to the required flash code (see ‘Selecting a Flash Code’, page 8), also located
on the top of the internal flasher unit.
5. Replace internal flasher unit back inside lantern cover.
6. Replace lens cover back onto unit, making sure that wires are not protruding, and screw the two
socket cap screws up tight.
7. Battery Connection: Connect “Battery Negative (-)” wire to negative terminal of battery, and
“Battery Positive (+)” wire to positive terminal of battery.
Mains Connection: Connect negative and then positive wires to 12volt power supply (ONLY).
8. To test place dark cover (towel or jacket) on top of light to activate sensor, light will come on.
9. Ensure that the unit is bolted to an even, flat surface.
Care must be taken to observe the polarity of each wire before they are connected.
To ensure waterproofing of the unit, make sure that no wires are protruding and that there is
an even seal when reattaching the lens cover to the unit body.
7
Latest products and information available at www.sealite.com.au
Selecting an Intensity Setting
Pulse settings on Sealite lanterns operate via DIP switches, located near the rotary switches on the
flasher unit. The pulse settings may be used to reduce the power consumption and intensity of the
lantern. Setting the lantern to 25% pulse will reduce the power consumption to 25% of the normal
100% setting and the range by 50%. This setting may be used to adjust to local sunlight conditions.
The following diagrams indicate pulse settings:O
N
O
N
O
N
O
N
1
2
1
2
1
2
1
2
100%
75%
50%
25%
Selecting a Flash Code- Rotary Switches A and B
All lanterns have 2 rotary switches marked A and B on the flasher unit, as below. Turning the small
arrows to the appropriate number or letter will set the code (see ‘Flash Code’ section, page 9). The
unit may take up to one minute to activate a new flash code. A comprehensive list of available flash
codes is listed on pages 9-15 of this manual.
Rotary Switches A and B
A
B
Maintenance and Servicing
Designed to be maintenance free, the SL07 & SL10 require minimal attention, though the following
maintenance and servicing information is provided to help ensure the life of your product.
1. Cleaning Lens- occasional cleaning of the light lens may be required. Using a cloth and warm
soapy water, wipe off any foreign matter before rinsing the lens with fresh water.
2. Battery Check- inspection of batteries should be performed every three years (minimum) to
ensure that the charger, battery and ancillary electronics are functioning correctly. Using a
voltage meter, check that the battery voltage is at least 12 volts under 100MA load, and ensure
all terminals are clear of foreign matter (Battery Connected Units Only).
8
Latest products and information available at www.sealite.com.au
Flash Codes
SEALITE® code reference is listed by number of flashes
For the latest version of this document, check:
http://www.sealite.com.au
E-mail: [email protected]
Symbols
FL
F
Q
VQ
OC
ISO
LFL
MO
Flash followed by number Eg. FL 1 S, one flash every second
Fixed
Quick flash
Very quick flash
Occulting; greater period on than off
Isophase; equal period on and off
Long flash long
Morse code ( ) contains letter
For example, VQ (6) + LFL 10 S means 6 very quick flashes followed by a long flash, during a 10second interval.
The amount of power your lantern draws through the night depends on the duty cycle, i.e. the amount
of time on as a proportion to the timing cycle. For example, 0.5 seconds on and 4.5 seconds off
equals a 10% duty cycle.
It is best to operate at the lowest duty cycle appropriate to the actual needs of the application.
Recommended Rhythm for Flashing Light - IALA Regions A and B
MARK DESCRIPTION
RHYTHM
Port Hand & Starboard Marks:
Any, other than Composite Group Flashing (2+1)
Preferred Channel Starboard:
Composite Group Flashing (2+1)
Preferred Channel Port:
Composite Group Flashing (2+1)
North Cardinal Mark:
Very quick or quick
East Cardinal Mark:
Very quick (3) every 5 seconds or quick (3) every 10 seconds
South Cardinal Mark:
Very quick (6) + long flash every 10 seconds or quick (6) + long flash every 15 seconds
West Cardinal Mark:
Very quick (9) every 10 seconds or quick (9) every 15 seconds
Isolated Danger Mark:
Group flashing (2)
Safe Water Mark:
Isophase, occulting, one long flash every 10 seconds or Morse Code “A”
Special Marks:
Any, other than those described for Cardinal, Isolated Danger or Safe Water Marks
9
Latest products and information available at www.sealite.com.au
SWITCH
A
B
0
0
D
3
E
3
F
3
7
3
8
3
9
3
A
3
8
4
B
3
9
4
C
3
F
4
1
0
0
5
0
4
2
0
3
0
4
0
5
0
6
0
7
0
1
2
8
0
9
0
D
6
1
5
A
0
2
5
B
0
3
5
C
0
D
0
2
2
5
4
E
2
4
6
4
5
5
5
E
0
F
0
6
5
0
1
1
1
2
1
3
2
3
6
F
2
3
1
8
5
4
1
5
1
9
5
6
1
7
1
4
2
8
2
0
3
FLASH CODE
ON
OFF
F (Steady light)
VQ 0.5 S
VQ 0.6 S
VQ 0.6 S
Q1S
Q1S
Q1S
Q1S
Q1S
Q 1.2 S
Q 1.2 S
Q 1.2 S
FL 1.5 S
FL 1.5 S
FL 1.5 S
FL 1.5 S
FL 2 S
FL 2 S
FL 2 S
FL 2 S
FL 2 S
FL 2 S
ISO 2 S
FL 2.5 S
FL 2.5 S
FL 2.5 S
FL 3 S
FL 3 S
FL 3 S
FL 3 S
FL 3 S
FL 3 S
FL 3 S
ISO 3 S
OC 3 S
OC 3 S
OC 3.5 S
FL 4 S
FL 4 S
FL 4 S
FL 4 S
FL 4 S
FL 4 S
FL 4 S
FL 4 S
ISO 4 S
OC 4 S
OC 4 S
FL 4.3 S
FL 5 S
FL 5 S
FL 5 S
FL 5 S
FL 5 S
FL 5 S
ISO 5 S
LFL 5 S
OC 5 S
0.2
0.2
0.3
0.2
0.3
0.4
0.5
0.8
0.3
0.5
0.6
0.2
0.3
0.4
0.5
0.2
0.3
0.4
0.5
0.7
0.8
1.0
0.3
0.5
1.0
0.2
0.3
0.4
0.5
0.6
0.7
1.0
1.5
2.0
2.5
2.5
0.2
0.3
0.4
0.5
0.6
0.8
1.0
1.5
2.0
2.5
3.0
1.3
0.2
0.3
0.5
0.9
1.0
1.5
2.5
2.0
3.0
0.3
0.4
0.3
0.8
0.7
0.6
0.5
0.2
0.9
0.7
0.6
1.3
1.2
1.1
1.0
1.8
1.7
1.6
1.5
1.3
1.2
1.0
2.2
2.0
1.5
2.8
2.7
2.6
2.5
2.4
2.3
2.0
1.5
1.0
0.5
1.0
3.8
3.7
3.6
3.5
3.4
3.2
3.0
2.5
2.0
1.5
1.0
3.0
4.8
4.7
4.5
4.1
4.0
3.5
2.5
3.0
2.0
10
Latest products and information available at www.sealite.com.au
SWITCH
A
B
1
3
2
3
C
6
B
5
C
5
8
1
9
1
A
1
7
5
B
1
5
2
9
2
6
4
3
3
4
3
A
4
9
6
5
6
D
5
C
1
E
5
B
4
6
2
A
2
6
6
B
2
F
5
C
4
7
6
0
6
1
6
D
1
2
6
E
1
1
4
C
2
D
2
7
2
2
4
8
6
5
3
6
3
F
1
D
4
3
4
0
2
4
4
7
4
A
6
E
4
FLASH CODE
ON
OFF
OC 5 S
OC 5 S
FL 6 S
FL 6 S
FL 6 S
FL 6 S
FL 6 S
FL 6 S
FL 6 S
FL 6 S
ISO 6 S
LFL 6 S
OC 6 S
OC 6 S
OC 6 S
FL 7 S
FL 7 S
OC 7 S
FL 7.5 S
FL 7.5 S
FL 8 S
FL 8 S
ISO 8 S
LFL 8 S
OC 8 S
LFL 8 S
FL 9 S
FL 9 S
OC 9 S
FL 10 S
FL 10 S
FL 10 S
FL 10 S
FL 10 S
FL 10 S
LFL 10 S
LFL 10 S
ISO 10 S
LFL 10 S
OC 10 S
OC 10 S
OC 10 S
FL 12 S
FL 12 S
LFL 12 S
FL 15 S
LFL 15 S
OC 15 S
LFL 20 S
FL 26 S
4.0
4.5
0.2
0.3
0.4
0.5
0.6
1.0
1.2
1.5
3.0
2.0
4.0
4.5
5.0
1.0
2.0
4.5
0.5
0.8
0.5
1.0
4.0
2.0
5.0
3.0
0.9
1.0
6.0
0.2
0.3
0.5
0.8
1.0
1.5
2.0
3.0
5.0
4.0
6.0
7.0
7.5
1.2
2.5
2.0
1.0
4.0
10.0
2.0
1.0
1.0
0.5
5.8
5.7
5.6
5.5
5.4
5.0
4.8
4.5
3.0
4.0
2.0
1.5
1.0
6.0
5.0
2.5
7.0
6.7
7.5
7.0
4.0
6.0
3.0
5.0
8.1
8.0
3.0
9.8
9.7
9.5
9.2
9.0
8.5
8.0
7.0
5.0
6.0
4.0
3.0
2.5
10.8
9.5
10.0
14.0
11.0
5.0
18.0
25.0
11
Latest products and information available at www.sealite.com.au
SWITCH
A
B
FLASH CODE
ON
OFF
ON
OFF
0
E
1
2
3
F
2
4
0
1
9
2
5
7
A
6
7
9
2
3
3
A
7
8
4
8
5
4
5
F
9
9
6
7
6
8
B
9
4
B
C
D
A
A
8
C
D
FL (2) 4 S
VQ (2) 4 S
FL (2) 4.5 S
FL (2) 4.5 S
FL (2) 4.5 S
FL (2) 5 S
FL (2) 5 S
FL (2) 5 S
FL (2) 5 S
FL (2) 5 S
Q (2) 5 S
Q (2) 5 S
FL (2) 5.5 S
FL (2) 6 S
FL (2) 6 S
FL (2) 6 S
FL (2) 6 S
FL (2) 6 S
FL (2) 6 S
FL (2) 6 S
Q (2) 6 S
FL (2) 7 S
FL (2) 8 S
FL (2) 8 S
FL (2) 8 S
FL (2) 8 S
FL (2) 8 S
OC (2) 8 S
OC (2) 8 S
VQ (2) 8 S
FL (2) 10 S
FL (2) 10 S
FL (2) 10 S
FL (2) 10 S
FL (2) 10 S
FL (2) 10 S
FL (2) 10 S
FL (2) 10 S
Q (2) 10 S
FL (2) 12 S
FL (2) 12 S
FL (2) 12 S
FL (2) 15 S
FL (2) 15 S
Q (2) 15 S
FL (2) 20 S
FL (2) 25 S
0.5
0.2
0.3
0.4
0.5
0.2
0.2
0.4
0.5
1.0
0.3
0.5
0.4
0.3
0.3
0.3
0.4
0.5
0.8
1.0
0.3
1.0
0.4
0.4
0.5
0.8
1.0
3.0
5.0
0.2
0.4
0.5
0.5
0.5
0.5
0.8
1.0
1.0
0.6
0.4
0.5
1.5
0.5
1.0
0.2
1.0
1.0
1.0
1.0
1.0
1.0
1.0
0.8
1.2
0.6
1.0
1.0
0.7
0.5
1.4
0.6
0.9
1.0
1.0
1.0
1.2
1.0
0.7
1.0
0.6
1.0
1.0
1.2
1.0
2.0
1.0
1.0
1.6
0.5
1.0
1.5
2.0
1.2
1.0
1.5
0.4
1.0
1.0
2.0
1.5
2.0
0.8
3.0
1.0
0.5
0.2
0.3
0.4
0.5
0.2
0.2
0.4
0.5
1.0
0.3
0.5
0.4
1.0
0.3
0.3
0.4
0.5
0.8
1.0
0.3
1.0
2.0
0.4
0.5
2.4
1.0
1.0
1.0
0.2
0.4
1.5
0.5
0.5
0.5
0.8
1.0
1.0
0.6
0.4
0.5
1.5
2.0
1.0
0.2
1.0
1.0
2.0
2.6
2.9
2.7
2.5
3.8
3.4
3.6
3.0
2.0
3.7
3.5
3.3
4.1
4.5
4.4
4.2
4.0
3.2
3.0
4.7
4.0
5.0
6.2
6.0
3.6
5.0
2.0
1.0
6.6
7.6
7.5
8.0
7.5
7.0
7.2
7.0
6.5
8.4
10.2
10.0
7.0
11.0
11.0
13.8
15.0
22.0
A
B
A
A
A
9
C
A
7
7
B
9
A
8
A
A
A
9
8
7
9
9
B
A
7
8
7
C
C
B
A
8
7
7
9
7
9
7
9
A
9
9
8
7
B
A
A
12
Latest products and information available at www.sealite.com.au
SWITCH
A
B
9
7
5
9
0
C
E
9
3
C
2
B
A
B
F
A
0
B
B
7
B
8
C
8
C
B
C
7
D
B
D
7
3
8
8
9
B
B
D
8
1
B
E
A
E
7
B
6
4
8
5
8
1
8
F
7
9
D
0
8
F
8
0
9
1
9
6
8
1
C
4
B
3
B
5
B
6
B
FLASH CODE
ON
OFF
ON
OFF
ON
OFF
Q (3) 5 S
VQ (3) 5 S
VQ (3) 5 S
VQ (3) 5 S
FL (3) 6 S
FL (2+1) 6 S
Q (3) 6 S
FL (3) 8 S
FL (3) 9 S
FL (3) 9 S
FL (3) 10 S
FL (3) 10 S
FL (3) 10 S
FL (3) 10 S
FL (3) 10 S
FL (3) 10 S
FL (2+1) 10 S
OC (3) 10 S
Q (3) 10 S
FL (2 + 1) 10 S
FL (3) 12 S
FL (3) 12 S
FL (3) 12 S
FL (3) 12 S
FL (2+1) 12 S
FL (2+1) 12 S
FL (2+1) 13.5 S
FL (3) 15 S
FL (3) 15 S
FL (3) 15 S
FL (2+1) 15 S
FL (2+1) 15 S
FL (2+1) 15 S
FL (2+1) 15 S
VQ (3) 15 S
FL (3) 20 S
FL (3) 20 S
FL (3) 20 S
FL (3) 20 S
0.5
0.2
0.3
0.3
0.5
0.3
0.3
0.5
0.3
0.8
0.3
0.4
0.5
0.5
0.6
1.0
0.5
5.0
0.3
0.5
0.5
0.5
0.8
1.0
0.8
1.0
1.0
0.3
0.4
0.5
0.6
0.7
0.7
1.0
0.1
0.5
0.5
0.8
1.0
0.5
0.3
0.2
0.3
1.0
0.4
0.7
1.0
1.0
1.2
0.7
0.6
0.5
1.5
0.6
1.0
0.7
1.0
0.7
0.5
1.5
2.0
1.2
1.0
1.2
1.0
1.0
1.7
1.0
1.5
0.3
0.5
0.7
2.0
0.5
3.0
1.5
1.2
1.0
0.5
0.2
0.3
0.3
0.5
0.3
0.3
0.5
0.3
0.8
0.3
0.4
0.5
0.5
0.6
1.0
0.5
1.0
0.3
0.5
0.5
0.5
0.8
1.0
0.8
1.0
1.0
0.3
0.4
0.5
0.6
0.7
0.7
1.0
0.1
0.5
0.5
0.8
1.0
0.5
0.3
0.2
0.3
1.0
1.2
0.7
1.0
1.0
1.2
0.7
0.6
0.5
1.5
0.6
1.0
2.1
1.0
0.7
0.5
1.5
2.0
1.2
3.0
2.4
4.0
4.0
1.7
1.0
1.5
0.3
0.5
0.7
5.0
0.5
3.0
1.5
1.2
1.0
0.5
0.2
0.3
0.3
0.5
0.3
0.3
0.5
0.3
0.8
0.9
1.2
0.5
0.5
0.6
1.0
0.5
1.0
0.3
1.5
0.5
0.5
0.8
1.0
0.8
1.0
1.0
0.3
0.4
0.5
1.4
1.9
2.1
1.0
0.1
0.5
0.5
0.8
1.0
2.5
3.8
3.7
3.5
2.5
3.5
3.7
4.5
6.1
4.2
7.1
6.8
7.5
5.5
7.0
5.0
5.7
1.0
7.7
6.5
7.5
6.5
7.2
5.0
6.0
4.0
5.5
10.7
11.8
10.5
11.8
10.7
10.1
5.0
13.7
12.5
15.5
15.2
15.0
13
Latest products and information available at www.sealite.com.au
SWITCH
A
B
FLASH CODE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
B
B
8
1
2
F
B
4
C
3
A
4
8
7
D
C
5
0
3
0
E
6
VQ (4) 4 S
Q (4) 6 S
Q (4) 6 S
FL (4) 10 S
FL (4) 10 S
Q (4) 10 S
FL (4) 12 S
FL (4) 12 S
FL (4) 12 S
FL (4) 12 S
Q (4) 12 S
FL (4) 15 S
FL (4) 15 S
FL (4) 15 S
FL (4) 16 S
FL (4) 20 S
FL (4) 20 S
FL (4) 20 S
FL (4) 20 S
Q (4) 20 S
Q (4) 28 S
FL (4) 30 S
0.25
0.3
0.4
0.5
0.8
0.3
0.3
0.5
0.5
0.8
0.3
0.5
1.0
1.5
0.5
0.3
0.5
0.5
1.5
0.5
0.5
0.5
0.25
0.7
0.6
1.0
1.2
0.7
1.7
0.5
1.5
1.2
0.7
1.5
1.0
0.5
1.5
3.0
1.5
1.5
1.5
0.5
0.5
0.5
0.25
0.3
0.4
0.5
0.8
0.3
0.3
0.5
0.5
0.8
0.3
0.5
1.0
0.5
0.5
0.3
0.5
0.5
1.5
0.5
0.5
0.5
0.25
0.7
0.6
1.0
1.2
0.7
1.7
0.5
1.5
1.2
0.7
1.5
1.0
0.5
1.5
3.0
1.5
1.5
1.5
0.5
0.5
0.5
0.25
0.3
0.4
0.5
0.8
0.3
0.3
0.5
0.5
0.8
0.3
0.5
1.0
0.5
0.5
0.3
0.5
0.5
1.5
0.5
0.5
0.5
0.25
0.7
0.6
1.0
1.2
0.7
1.7
0.5
1.5
1.2
0.7
1.5
1.0
0.5
1.5
3.0
1.5
4.5
1.5
0.5
0.5
0.5
0.25
0.3
0.4
0.5
0.8
0.3
0.3
0.5
0.5
0.8
0.3
0.5
1.0
0.5
0.5
0.3
0.5
0.5
1.5
0.5
0.5
0.5
2.25
2.7
2.6
5.0
3.2
6.7
5.7
8.5
5.5
5.2
8.7
8.5
8.0
10.5
9.5
9.8
13.5
10.5
9.5
16.5
24.5
26.5
SWITCH
A
B
FLASH CODE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
D
E
E
5
9
9
Q (5) 7 S
Q (5) 10 S
FL (5) 16.5 S
FL (5) 20 S
FL (5) 20 S
FL (5) 20 S
0.3
0.3
5.0
0.5
0.8
1.0
0.7
0.7
1.5
0.5
1.2
1.0
0.3
0.3
0.5
0.5
0.8
1.0
0.7
0.7
1.5
0.5
1.2
1.0
0.3
0.3
0.5
0.5
0.8
1.0
0.7
0.7
1.5
0.5
1.2
1.0
0.3
0.3
0.5
0.5
0.8
1.0
0.7
0.7
1.5
0.5
1.2
1.0
0.3
0.3
0.5
0.5
0.8
1.0
2.7
5.7
3.5
15.5
11.2
11.0
F
D
D
D
D
E
E
F
E
D
D
D
E
D
E
D
D
D
F
F
E
F
D
D
8
F
F
E
SWITCH
A
B
F
D
A
F
7
F
A
E
FLASH CODE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Q (6) 10 S
FL (6) 15 S
FL (6) 15 S
FL (6) + LFL 15 S
0.3
0.3
0.5
0.5
0.7
0.7
1.0
1.0
0.3
0.3
0.5
0.5
0.7
0.7
1.0
1.0
0.3
0.3
0.5
0.5
0.7
0.7
1.0
1.0
0.3
0.3
0.5
0.5
0.7
0.7
1.0
1.0
0.3
0.3
0.5
0.5
0.7
0.7
1.0
1.0
0.3
0.3
0.5
0.5
4.7
9.7
7.0
7.0
SWITCH
A
B
6
E
7
E
2
F
2
E
3
E
8
F
FLASH CODE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
VQ (6) + LFL 10 S
VQ (6) + LFL 10 S
Q (6) + LFL 15 S
Q (6) + LFL 15 S
Q (6) + LFL 15 S
VQ (6) + LFL 15 S
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.3
0.8
0.7
0.6
0.3
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.3
0.8
0.7
0.6
0.3
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.3
0.8
0.7
0.6
0.3
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.3
0.8
0.7
0.6
0.3
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.3
0.8
0.7
0.6
0.3
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.3
0.8
0.7
0.6
0.3
2.0
2.0
2.0
2.0
2.0
2.0
5.0
4.4
7.0
7.0
5.8
9.4
SWITCH
A
B
4
E
5
E
1
F
0
E
1
E
FLASH CODE
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
VQ (9) 10 S
VQ (9) 10 S
Q (9) 15 S
Q (9) 15 S
Q (9) 15 S
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
0.3
0.3
0.8
0.7
0.6
0.2
0.3
0.2
0.3
0.6
5.8
4.9
6.8
6.7
4.8
14
Latest products and information available at www.sealite.com.au
SWITCH
FLASH CODE
ON
A
B
MORSE CODE ( ) INDICATES LETTER
7
8
MO (A) 6 S
0.3
7
B
MO (A) 8 S
0.4
8
8
MO (A) 8 S
0.8
B
8
MO (U) 10 S
0.3
C
8
MO (U) 10 S
0.4
D
8
MO (U) 10 S
0.5
9
8
MO (A) 10 S
0.5
8
9
MO (D) 10 S
5.0
A
8
MO (A) 15 S
0.5
F
8
MO (U) 15 S
0.6
0
9
MO (U) 15 S
0.7
1
9
MO (U) 15 S
0.7
7
D
MO (B) 15 S
1.5
OFF
ON
OFF
0.6
0.6
1.2
0.7
0.6
0.5
0.5
1.0
1.5
0.3
0.5
0.7
0.5
1.0
2.0
2.4
0.3
0.4
0.5
1.5
1.0
2.0
0.6
0.7
0.7
0.5
4.1
5.0
3.6
0.7
0.6
0.5
7.5
1.0
11.0
0.3
0.5
0.7
0.5
ON
OFF
0.9
1.2
1.5
7.1
6.8
6.5
1.0
1.0
1.4
1.9
2.1
0.5
11.8
10.7
10.1
0.5
ON
OFF
0.5
10.5
Trouble Shooting
Problem
Remedy
Lantern will not activate.
Timing codes will not change.
Lantern will not operate for the
entire night.
• Ensure internal toggle switch is set to the 'ON position.
• Ensure lantern is in darkness.
• Wait at least 60 seconds for the program to initialise in
darkness.
• Ensure switch setting is on a valid code (not unused flash code).
• Ensure battery terminals are properly connected.
• Ensure battery voltage is above 12volts.
• Turn rotary switches several times to ensure contacts are clear.
• Reducing the light output intensity or duty cycle (flash code) will
reduce current draw on the battery.
15
Latest products and information available at www.sealite.com.au
Sealite Lantern Warranty
Activating the warranty
Upon purchase, the Sealite warranty must be activated for recognition of future claims. To do this you
have two (2) options:
1. Postal registration
- Please complete the Sealite Warranty Registration card and return to Sealite within 30 days of
your purchase.
2. Online registration
- Please complete the Online Registration form at;
www.sealite.com.au or www.sealiteusa.com
Sealite Pty. Ltd. will repair or replace your lantern in the event of electronic failure for a period of
three years from the date of purchase.
The unit must be returned to Sealite Pty. Ltd. freight prepaid.
Warranty Conditions
1. The warranty is applicable to lanterns manufactured from 1/1/2000.
2. The lantern must be installed in accordance with Sealite instructions.
3. No modifications to the original specifications determined by Sealite shall be made without written
approval of Sealite Pty. Ltd.
4. Input voltage shall not exceed those recommended for the product.
5. Warranty does not cover damage caused by the incorrect replacement of battery in the SL15,
SL60 or SL70 lantern models.
6. Replacement of battery is excluded from the warranty.
7. No recognition shall be given to flooding, or damage incurred from misuse of lanterns.
8. Solar modules are covered by individual manufacturers’ warranty.
Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Sealite
products are subject to certain Australian and world-wide patent applications.
Head Office
USA Customers:
Sealite Pty Ltd
11 Industrial Drive
Somerville, Vic 3912
Australia
Tel: +61 3 5977 6128
Fax: +61 3 5977 6124
Email: [email protected]
Internet: www.sealite.com.au
GulfRim Navigation
1401 South State
Abbeville, LA 70510
USA
Ph: 877-893-0789
Fax: 337-893-6256
Internet: www.gulfrim.com
Email: [email protected]
16
Latest products and information available at www.sealite.com.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement