EInstruction | Mobi View | Specifications | eInstruction Mobi View Specifications

MOBIView™
Quick Start Guide
Contents
Mobi View At-a-Glance......................................................................4
1: Getting Started..............................................................................6
Before You Begin............................................................................... 6
What’s In the Box.............................................................................. 6
Setting Up Mobi View........................................................................ 8
2: Using Mobi View............................................................................11
Notes................................................................................................ 12
Annotate........................................................................................... 14
Favorites........................................................................................... 16
Keyboard.......................................................................................... 18
Reports............................................................................................. 20
Settings............................................................................................. 21
3: Getting the Most Out of Mobi.........................................................22
Multi-User Mode............................................................................... 22
Companion Products......................................................................... 24
Learning Content and Resources........................................................ 24
4: Caring for Mobi View.....................................................................25
Mobi View......................................................................................... 25
Pen................................................................................................... 26
5: Support and Troubleshooting..........................................................27
© eInstruction (2010). All rights reserved.
eInstruction® and ExamView® are registered trademark and Mobi View™, eI Community™,
and Workspace™ are trademarks of eInstruction Corporation in the United States
and other countries. All other trademarks are the property of their respective owners.
Appendixes........................................................................................29
A: Limited Warranty for Mobi View..................................................... 29
B: Declaration of Conformity.............................................................. 31
C: Hardware and Software Requirements........................................... 32
D: Technical Specifications................................................................. 34
2
Mobi View At-a-Glance
Congratulations on your new Mobi
View. Mobi View will help you create
a highly interactive and collaborative
learning environment for you and
your students.
Take advantage of Mobi View’s
multi-user mode and optional Mobi
Learner student tablets to allow up to
nine students or teams to collaborate
at one time!
Mobi View, the sixth generation in
the series, includes an easy-to-use
touchscreen. This adds a whole
new dimension of convenience,
functionality, and control.
Powered by eInstruction’s awardwinning Workspace software, Mobi
View enables interaction with lesson
materials from virtually any source,
including publishers’ content from
more than 8,000 textbook titles.
3
Interactive touchscreen provides
one-click access to annotation
tools, notes, favorites, keyboard,
reports, and custom settings.
Active writing area
doubles as a remote
mouse pad.
4
Mobi View pen doubles as a
remote mouse. Clicking the pen
tip simulates a left-click; clicking
the top of the rocker button
simulates a right-click.
Mobi View at-a-glance
1: Getting Started
Before You Begin
Mobi View is compatible with most
Mac, Windows, or Linux operating
systems. Please see page 32 for
complete software and hardware
requirements.
Pen (extra nibs
included)
Pen lanyard
You’ll need an available USB port
and CD ROM drive to install Mobi
View and Workspace software.
Simply connect your computer to
a digital projector and you have
a full-size interactive whiteboard
system ideal for classroom
instruction.
Software
Wall power adapter
Mobi RF hub
Charging stand
(optional)
USB cable
5
Touchscreen
Power
button
USB connector
Recharging pen holder
Mobi RF hub holder
Active
writing
area
Battery
MOBIVIEW
Mobi View - front view
6
Mobi View - rear view
Setting Up Mobi View
1. Charge Mobi View
Before using Mobi View for the first
time, fully charge the tablet and pen
for optimal battery life. See page 25
for battery care tips.
a. Carefully pull out the plastic tab
from the pen and place the pen
in the recharging pen holder.
b. Remove the RF hub from
the back of Mobi View. For
convenience, store the RF
hub in the RF hub holder
on the charging stand.
c. Place Mobi View on the charging
stand.
Charging contacts
d. Plug the USB cable into the
power adapter and plug into the
wall outlet. Allow approximately
8 hours to fully charge the
battery.
Tip! You may use Mobi View while it
is charging. You will notice the pen
and battery charging indicators on
the touchscreen when powered on.
RF hub holder
7
Pen charging
Home
Battery
charging
3. Turn on Mobi View
a. Remove the RF hub from the
back of Mobi View and plug it
into a USB port on the computer.
Mobi View charging indicators
(power on only)
Tip! Alternately, charge Mobi View by
connecting it to a computer using the
provided USB cable. Allow 12 hours
if using this method.
2. Install Software
Load the Workspace software onto
your computer from the included CD.
Note: You may need administrator
rights on your computer to install
Workspace.
8
Tip! Connect the computer to a
projector to project Workspace to the
class.
b. Press the power button. If
connected, you will see the
Select Language screen. If
not, follow the on-screen
prompts to troubleshoot.
c. Select your desired language to
view the Home screen.
c. Select the Firmware
Updates tab, and press the
Check for Updates button.
3. Check for Firmware Updates
a. Open Device Manager. Select
the eInstruction icon from the
system tray on your computer,
and then select Device Manager.
b. In Device Manager, select
the Mobi View icon and then
select File > Preferences.
d. If firmware updates are
available, follow the on-screen
prompts to install the updates.
Go! Begin Using Mobi View
9
2: Using Mobi View
Access all Mobi View features directly
from the Home screen.
USB connected
(Signal strength if
disconnected)
Reports
ready
Presenter
Pen proximity indicator (appears
when pen near active writing
area) or pen charging indicator
(if charging)
Home
Create, post, and
save notes
(page 11)
Battery life
indicator
Annotate
content
(page 13)
Bookmark favorite
files or websites
(page 15)
Access a standard
keyboard (page 17)
View assessment
reports if using a
student response
system (page 19)
View and adjust
settings (page 21)
The Home screen
Note: To conserve battery power, Mobi View goes into “sleep” mode after 1 - 5
minutes of inactivity and shuts down after 20 minutes. Likewise, the pen goes into
“sleep” mode after 2 minutes of inactivity. To wake up your Mobi View and pen, simply
press the pen tip to the Mobi View tablet.
10
Notes
Writing mode
Create and save up to 20 private
notes, or post public notes to share
with your class.
Writing Notes
1. Select the Pen tool and any
formatting options. Formatting
options include the pen
color, pen nib size, and note
background.
Note: The selected note background
only appears on notes posted to the
computer screen. The touchscreen
background will not change.
2. Write notes directly on the
touchscreen, or for more precise
writing, on the tablet’s active
writing area. The tablet’s active
writing area may be toggled
between Writing mode and
Mouse mode.
Mouse mode
MOBIVIEW
Active writing area
Saving Notes
Private notes are automatically saved
in Mobi View anytime you navigate
away from the Notes screen or add
a new note. Use the arrow buttons to
navigate between saved notes.
Important: Saved notes cannot be
posted.
Posting Notes
Press the Post button to post the
current note to a Workspace page,
making it visible to the class. Make
sure to post the current note before
creating a new one!
11
Tip! Posted notes are also copied to
the system clipboard and may be
pasted into any suitable application
(Windows only).
Deleting Notes
Press the Trash button to delete
the current note.
Adding Notes
Press the Plus button to add a
new note.
Pen or eraser tool
Pen color
Pen nib size
Note background
Return to
Home screen
Add new note
Delete note
Page back through
saved notes
Post note to share
with the class
Page forward through
saved notes
Notes screen
12
Mouse mode
(active writing area)
Writing mode
(active writing area)
Annotate
Access Workspace tools to annotate
content and collaborate with
multiple users from anywhere in
the classroom. The tools displayed
on the Annotate screen can be
customized.
For additional help with Workspace,
see the Workspace Getting Started
Guide or online help.
Annotating Content
1. Workspace automatically opens
in Lesson mode upon selecting
an annotation tool, and your
computer desktop is projected to
the class.
Return Customize Annotation
to Home tools
tools
screen
Start/stop
multi-user
mode
Annotate screen
2. Select the Pen tool. Begin
writing on the tablet’s
active area to annotate
the current screen, or
select the Blank Page tool
open a blank page to
annotate.
13
Annotation in Workspace software
Tip! All annotations created in a
single session are automatically
saved and named with the current
date.
Customize tools in Device Manager
Customizing Tools
1. Press the Customize Tools
button to open the Device
Manager utility on the computer.
Device Manager will open to the
Mobi View Properties window,
Annotate tab.
2. Select any function row.
3. Select the desired tool from the
drop down menu.
14
Launching Multi-User Mode
Mobi View allows up to nine devices,
including Mobi View, Mobi Learners,
Mobi KWIK, and DualBoard to
interact simultaneously in multiuser mode. See page 22 for more
information on multi-user mode.
Favorites
Bookmark and access up to 16
favorite links to websites or files.
Favorites are set up and stored in
eInstruction’s Device Manager utility
on the computer.
eICommunity
Page
forward
and back
through Favorites
list
Tip! If you use Mobi View with a
different computer, you will need to
reset your favorites.
Using Favorites
• Press the desired Favorites
button. The link, file, or
application will open
immediately.
Quickly access favorite links
15
Bookmarking Favorites
1. Press the Add Favorites button.
This will launch the Device
Manager utility on the computer.
Device Manager will open to the
Mobi View Properties window,
Favorites tab.
2. Select the function row you wish
to change.
3. Select the folder or link icon for
a file or website.
4. Enter the bookmark name and
location.
Set Favorites in Device Manager
16
Keyboard
Fill in fields or type web addresses
using the mobile keyboard.
Using the Keyboard Outside of
Workspace (Mouse Mode)
1. Use the Mobi View pen as a
mouse on the active tablet to
place the cursor in the desired
field.
2. Fill in the field by pressing the
pen tip to the desired characters
on the Mobi View keyboard.
3. Press Enter to enter the text in
the field.
4. Press Done to close the
keyboard and return to the
Home screen.
Using the Keyboard with
Workspace (Lesson or Annotate
Over Desktop Mode)
1. Use the Mobi View pen to enter
characters on the Mobi View
keyboard screen.
Note: As soon as you begin
typing in an active Workspace
presentation (Lesson or Annotate
Over Desktop Mode), the Type Text
window and on-screen keyboard
will appear on the desktop.
Characters appear in Type Text window
2. Click the pen once to the active
writing area to post the text to
the Workspace presentation.
Tip! Once posted, you can click and
drag the text anywhere on the screen.
17
3. Press Exit to close the keyboard
and return to the Home screen.
Tip! Use the keyboard as a substitute
for the Type Text tool on the Annotate
screen to quickly enter text using the
Mobi View keyboard.
Clear
Return to Home
screen
Enter
International characters
Keyboard screen
18
Workspace onscreen keyboard
Reports
If your classroom uses eInstruction
Student Response System devices,
you can view the assessment reports
in real-time on your Mobi View.
Available reports:
• Question Status
•
Session Summary
•
Answer Distribution
•
Session Results by Student
•
Response Grid
•
Response per Student
Tip! When report data is available,
a Reports icon will appear on the left
side of the title bar at the top of the
touchscreen.
View previous or
next report
Page up or down
through a report
Question Status
Session Summary
19
20
Answer Distribution
Response Grid
Session Results by Student
Response per Student
Settings
Customize Mobi View preferences.
Set or unset auto start
preferences
Calibrate the
touchscreen (if pen
is not lining up
when using Notes)
Settings
Set sleep timer
(1 - 5 minutes) to
dim the touchscreen
to conserve power
(the touchscreen
automatically turns off
after 20 minutes of
View firmware
Select from
inactivity)
and software
available
version numbers languages
Connect Mobi View
to the RF hub
Set the touchscreen
brightness level
Enter a device name
for Mobi View (up to
8 characters) to easily
identify it in Device
Manager
Settings screen
21
3: Getting the Most Out of Mobi
Multi-User Mode
Mobi View allows up to nine devices,
including Mobi View, Mobi Learners,
Mobi KWIK, and DualBoard to
interact simultaneously in multi-user
mode.
Mobi View is automatically
designated as the “Presenter” tablet
in a multi-device environment, (if
there is no other device already
set as “Presenter”) allowing you to
start and stop multi-user mode and
to view instant reports if using one
of eInstruction’s student response
systems.
Launching Multi-User Mode
1. Pair each additional Mobi
you wish to connect by first
pressing the Activation button
22
on the Mobi RF Hub, and
then the Activation button
on the Mobi. You must
pair the additional Mobi to
the hub within 2 minutes.
Activation button
RF Hub
Tip! If adding a Mobi KWIK or
Learner, the activation button is
the blue button next to the battery
compartment.
2. From the Annotate screen,
press the Multi-User button.
Workspace in Multi-User mode
4. Press the Exit Multi-User button
to end the multi-user session.
Locking Student Tablets
To lock student tablets and regain
control of the session, press the pen
tip to Mobi View.
3. Select the desired number
of users to activate the
Workspace multi-user mode.
Tip! You may also lock devices in
the Device Manager utility on the
computer by selecting the
device and then pressing the
Lock icon.
Designating a Presenter Tablet
1. Open Device Manager. Select
the eInstruction icon from the
23
Companion Products
eInstruction offers a complete
learning suite of products and
resources that can be used with
Mobi View to maximize the teaching
and learning experiences. Visit us at
www.einstruction.com for additional
information.
Mobi Learner Tablets and Dock
Additional Mobi Learner student
tablets and charging storage dock
allow you to take advantage of
the Mobi View multi-user feature.
Up to nine Mobis can engage in a
collaborative learning activity.
Student Response Systems
Easily identify students who
need special attention or topics
that require re-teaching with an
eInstruction student response system.
24
Mobi View allows you to view student
answers in real-time from the Reports
screen.
Learning Content and Resources
eI Community™
eI Community™ is an online resource
center open to all educators that
provides access to more than
125,000 instructional resources,
organized and searchable by
subject, grade level, media type, and
standards. With discussion boards,
blogs, and best practices, you’ll
find everything you need to energize
lessons and motivate learning, in one
convenient location.
ExamView®
The Exam View Assessment Suite
allows you to produce, administer,
and measure standards-aligned
formative assessments using test
questions from over 8,000 textbook
titles.
4: Caring for Mobi View
Mobi View
Cleaning
Wipe the surface of the Mobi View
with a soft cloth and a gentle
cleanser, safe for lenses or LCD
screens.
Changing the Battery
Mobi View uses a special
rechargeable Lithium battery that
should last 2 - 3 years under normal
use. Fully charge and discharge the
unit to maintain optimal battery life.
4. Gently insert the new battery
pack into the compartment.
Warning! Before replacing the cover,
hold down the battery connector
wires in the available space to avoid
pinching the wires.
5. Replace the battery cover.
To change the battery:
1. Use a Phillips Head
screwdriver to open the battery
compartment.
2. Remove the existing battery
pack.
6. Charge for 12 hours.
3. Plug the new battery connector
into the connector in the battery
compartment.
25
Pen
Changing the Pen Battery
The pen uses a special rechargeable
battery that typically lasts over a year
with normal use.
Pens will go into “sleep” mode after
two minutes of inactivity to conserve
power. Store the pens in Mobi View’s
recharging pen holder when not in
use.
LED
Positive
Tab
Note: If the battery is not inserted
correctly, the power will drain from
the battery.
3. Depress the pen tip. The pen
LED will flash four times if
battery was inserted correctly.
Caution! If the pen will not be used
for an extended period of time
(e.g., summer vacation), remove the
battery.
4. Align the ridges within the rear
pen section to the slots in the
front section.
To change the battery:
6. Charge the pen for 12 hours.
1. Depress the tab and slide the
two sections of the pen apart.
Caution! It typically takes three
charge and discharge cycles for the
rechargeable batteries to gain their
full power storage capacity. This is
especially important for initial use, or
anytime you replace the pen battery.
2. Insert the new battery with the
positive terminal facing towards
the tip of the pen.
26
5. Slide the two sections together
until the tab re-engages.
5: Support and Troubleshooting
Please look through the table below
for additional help with Mobi View.
For additional support, please
contact us at:
For help with Workspace, please see
the Workspace online help.
www.einstruction.com
+1 888.333.4988 (U.S. Toll Free)
+33 1.58.31.10.65 (Europe)
+1 480.443.2214 (Outside of U.S.
and Europe)
Troubleshooting Mobi View
Problem
Solution
Pens are not charging.
•
Check to make sure you have removed the
plastic tab from the pen battery compartment.
•
Check to make sure pens are seated properly in
the pen charger and that Mobi View is charged.
The Pen Charging icon appears on the home
screen while the pen is charging when Mobi
View is turned on.
•
Pens go into “sleep” mode after two minutes of
inactivity. Click the rocker button or pen tip to
reactivate.
Pen loses its charge.
27
Problem
Solution
When using the Notes
feature, my annotations are
not lining up with the pen.
•
Recalibrate the touchscreen. Select Settings
> Calibrate Touchscreen and follow the
calibration wizard.
Mobi View is not
communicating.
•
Mobi View goes into “sleep” mode after 15
minutes of inactivity by default. Press the
touchscreen to reactivate.
•
From the Settings screen, select the Pair with
Hub button, OR from the Device Manager
utility, try reconnecting the board.
•
Check to make sure you are using the
Mobi View RF hub if using in a multi-device
environment.
•
Is Device Manager running? Select the
eInstruction icon in the system tray to open
Device Manager and restart Mobi View.
Device Manager not found.
28
Appendixes
A: Limited Warranty for
Mobi View
eInstruction warrants these products to be free from
defects in material and workmanship under the
following terms. Complete and return the enclosed
warranty registration card to ensure that your products
are covered by this warranty.
Coverage
Parts and labor are warranted for one (1) year from the
date of the first consumer purchase for the Mobi View,
electronic pen, charging stand, and accessories. This
warranty applies to the original consumer purchaser
only.
Within the European Union, the warranty period is
two (2) years, as mandated by the EU. Contact your
local dealer or distributor for additional warranty
information.
Warranty is valid only if original consumer’s purchase
or lease date is less than or equal to six months from
the original eInstruction sale date. This information will
be captured by the system serial number and confirmed
by the reseller’s purchase order.
A nominal Warranty Handling Fee will be charged after
the first 90 days of use and calculated from the date
of original consumer purchase. This payment may be
made by Visa, MasterCard, or American Express. A
copy of the sales receipt or invoice will be required for
warranty verification.
Conditions
Except as specified below, this warranty covers all
defects in material or workmanship in the products. The
following are not covered by the warranty:
1. Any product on which the serial number has been
defaced, modified, or removed (if applicable).
2. Damage, deterioration, or malfunction resulting
from:
a. Accident, misuse, abuse, neglect, fire, water,
lightening, or other acts of nature, unauthorized product
modification for any purpose, or failure to follow
instructions supplied with the product.
b. Repair, or attempted repair, by anyone not authorized
by eInstruction.
c. Any damage in shipment of the product (claims must
be presented to the carrier).
d. Any other cause which does not relate to a
manufacturing defect.
3. Any product not sold or leased to a consumer within
six months of eInstruction’s original sale date.
4. Consumable parts, e.g., batteries, dry-erase markers,
eraser felt.
eInstruction will pay all labor and material expenses for
covered items, but will not pay for the following:
1. Removal or installation charges.
2. Costs for initial technical adjustments (set up),
including adjustments of user controls.
29
3. Certain shipping charges. (Payment of shipping
charges is discussed in the next section of this warranty.)
4. Packaging costs. (Customers should keep their
boxes.)
Warranty Service Procedures
1. To obtain service on your eInstruction product,
contact the Technical Support Department to receive
a Return Material Authorization Number (RMA#) and
shipping instructions by calling: In United States: (480)
443-2214 (MST) In Europe: +33 1.58.31.10.60 (CET)
2. Ship the product to eInstruction with the RMA#
marked clearly on the outside of the box. eInstruction
reserves the right to refuse the shipment, if not properly
marked.
3. Although the consumer must pay any shipping
charges to ship the product to eInstruction for warranty
service, eInstruction will pay the return shipping charges
for ground shipment. Other shipping options are
available at an additional fee.
4. Whenever warranty service is required, the original
dated sales invoice (or a copy) must be presented as
proof of warranty coverage, and should be included
in shipment of the product. In addition, please include
your name, address, telephone number, fax number,
email address, and a description of the problem.
5. If eInstruction determines that the unit is not defective
within the terms of the warranty, the consumer shall
pay the cost of all freight charges, as well as any repair
charges.
Technical Support
Web-based Technical Support is available free of
charge at: www.einstruction.com, where current driver
releases, as well as comprehensive technical support,
troubleshooting, Technical Bulletins and FAQs can be
30
found.
Telephone Technical Support is available free of charge
to the original consumer for a period of 90 days from
the date of purchase of the product. Please contact our
Technical Support Department: In United States: (480)
443-2214 (MST) In Europe: +33 1.58.31.10.60 (CET).
You can also fax your request to: In United States: (480)
948-5508 (MST) In Europe: +33 1.58.31.10.69 (CET).
Our toll-free number in the U.S. is: 800-856-0732
(MST)
Disclaimer of Unstated Warranties
The warranty printed above is the only warranty
applicable to this purchase. ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. Assuming the warranty
above stated is otherwise applicable, it is expressly
understood and agreed that eInstruction’s sole
liability, whether in contract, tort, under any warranty,
in negligence, or otherwise, shall be for the repair
or replacement of the defective parts, and under no
circumstances shall eInstruction be liable for special,
indirect, or consequential damages. The price stated
and paid for the equipment is a consideration in
limiting eInstruction’s liability.
Notice
Some states and provinces do not allow the exclusion
or limitation of incidental or consequential damages, so
the above exclusion may not apply to you. This warranty
gives you specific legal rights, and you may have other
rights, which vary from state to state, or province to
province.
To obtain service on your eInstruction product, call
our Technical Support Department at (480) 443-2214
(MST), or fax us at (480) 948-5508 (MST); in Europe
call +33 1.58.31.10.60 (CET), or fax us at +33
1.58.31.10.69 (CET).
B: Declaration of Conformity
We can also be contacted through our Web site
at www.einstruction.com (in US), or at www.
interwritelearning.eu (in France).
The “CE“ mark on these devices indicates
compliance under the EMC 2004/108/
EC Directive. Declaration of conformity
according to ISO/IEC Guide 22 and EN
45014
Important! All products returned to eInstruction for
service must have prior approval in the form of a
Return Merchandise Authorization Number (RMA#),
which can be obtained by calling the Technical Support
Department.
Manufacturer’s Name: eInstruction Corp
Manufacturer’s Address: 308 N Carroll
Blvd Denton, TX 76201 U.S.A.
Declares, that these products
Product Name: Mobi View™ Product
Options: All conform to the following
product specifications:
RoHS: “-R” labelled products conform to
DIRECTIVE 2002/95/EC. These products
are RoHS-compliant.
Mobi View, Interwrite Mobi, and Interwrite
Mobi Learner are protected under United
States Patent # 6,930,673 European
Union WEEE Directive.
31
C: Hardware and Software
Requirements
Windows
• Microsoft Windows XP SP2,
Windows Vista, or Windows 7
•
Intel Pentium III processor
1GHz equivalent or higher (or
equivalent)
•
512 MB RAM (1 GB RAM for
Vista)
•
650 MB hard disk space for
installation (550MB additional
for Gallery Content)
•
CD-ROM Drive for installation
•
•
•
32
or higher
•
Microsoft .NET Framework 3.0
or greater
•
Internet connection required for
access to online content and
tutorials
•
RF/USB slot on computer
Additional Requirements
for Multi-User Environment
(Windows)
• Microsoft Windows XP SP2,
Windows Vista, or Windows 7
•
Intel Core2 Duo processor 2GHz
equivalent or higher
Video Card and Monitor
capable of XVGA (1024 x
768) or higher resolution with
minimum of 16-bit color
•
4 GB RAM
•
650 MB hard disk space for
installation (550MB additional
for additional Content)
Sound Card with Speakers and
microphone for audio/video
record and playback
•
CD-ROM Drive for installation
•
Video Card and Monitor
capable of XVGA (1024 x
768) or higher resolution with
Adobe Flash Player version 9.0
minimum of 24-bit color
video
•
Video Card with support for
DirectX 9 or greater
•
One available USB Port
•
Java 1.5 or greater
•
Sound Card with Speakers and
microphone for audio/video
record and playback
•
“libUSB” (USB support)
•
Adobe Flash Player version 9.0
or higher
•
Microsoft .NET Framework 3.0
or greater
•
Internet connection require for
access to online content and
tutorials
Mac
• Mac OS X 10.4.11, 10.5.8, or
10.6
•
PowerPC G4 1GHz or higher
•
512 MB RAM
•
500 MB hard disk space for
installation
•
1024 x 768 or higher resolution
33
D: Technical Specifications
Platform Support
Microsoft Windows® (7, XP or Vista)
Hardware Interface
RF, USB
Technology
Electromagnetic Pen
Operating Temperature
40° to 115° F (5° to 46° C)
Storage Temperature
-40° to 158° F (-40° to 70° C)
Warranty
One Year Warranty; extended warranty options are
available
Battery Life
Greater than 12 hours
Range
50 ft (15.24m) open field line of sight
Max Pads per Configuration
Up to 9 MOBI®s can give simultaneous input to
a single computer. Up to 30 MOBI®s can be
connected with 4 hubs.
37-01398-01 Rev A
34
Corporate Headquarters
308 N. Carroll Blvd.
Denton, TX 76201
Tel: 888.707.6819
Fax: 940.565.0959
Western Office
14400 N. 87th St., Ste 250
Scottsdale, AZ 85260
Tel: 480.948.6540
Fax: 940.948.5508
ASY: 37-01346-01
eInstruction EMEA
Z.I. Les Mardelles 26/36 rue Alfred Nobel
93600 Aulnay Sous Bois France
Tel: +33 1.58.31.10.60
Fax: +33 1.58.31.10.69
www.interwritelearning.eu
Technical Support
www.einstruction.com
+1 888.333.4988 (U.S. Toll Free)
+33 1.58.31.10.65 (Europe)
+1 480.443.2214 (Outside of U.S. and EU)
37-01397-01 | 36-01630 Rev A
Download PDF

advertising