FLOWSERVE VALVOLE

FLOWSERVE VALVOLE
Control Valve Product Guide
Flowserve Flow Control
Flowserve Pumps
Flowserve Flow Solutions
Flowserve - Corporate Overview
World's Premier Provider of Industrial Flow
Management Services
Flowserve is the world's premier provider of industrial flow
management services. The Company produces engineered
pumps, precision mechanical seals, automated and manual
quarter-turn valves, control valves and actuators, and
provides a range of related flow management services,
primarily for the process industries. With 2002 sales of
almost $2.3 billion, Flowserve has about 14,000 employees
and operates in 56 countries.
Headquarters: 5215 North O’Connor Blvd.
Suite 2300, Irving, Texas 75039
Telephone:
+1 (972) 443-6500
Telefax:
+1 (972) 443-6800
Flowserve's Products and Services
Flowserve Corporation is the world's premier single-source provider
of flow management products and related repair and replacement
services. Flowserve is composed of three divisions:
• Flow Control is a leading global manufacturer of flow control
products including control valves, quarter-turn valves, actuators,
and complete valve automation systems.
• Flow Solutions is a world leading designer and manufacturer
of mechanical seals and other engineered fluid sealing systems.
• Flowserve Pumps is one of the world's largest suppliers of
industrial, engineered, and special purpose pump and systems.
Flowserve's products can be found in various process industries
including: petroleum refining, oil and gas production, pipeline,
chemical, power generation, pulp and paper, mineral and ore
processing, water resources, pharmaceuticals and general industrial
applications.
2
Flowserve Flow Control
Flowserve Flow Control is the foremost specialist valve
and controls manufacturing organisation in the world.
Flowserve's broad offering of flow control products includes
many of the most widely known and trusted brand names in
the marketplace.
Strong brand recognition results primarily from the extraordinary success of Flowserve valve and automation products
with thousands of applications in all major industries.
Flowserve supplies contractors, OEMs, distributors and end
users with a product range of unparalleled breadth to meet
modern industry's flow control needs in various markets.
Quality, safety, availability and in-depth technical support are
combined in a world class product offering. Engineered and
manufactured through Flowserve Flow Control, our range of
complementary products is designed to provide a flexible
approach to solving your operational requirements.
Solutions for today should also spell secure investments for
times to come. Each user-specific development is based on
a vision of the future.
Flowserve Flow Control has the manufacturing capability to
handle any flow control requirement anywhere in the world from custom-engineered products to large projects. Major
manufacturing operations are located in North America
(Springville), Europe (Austria, France, Germany, Sweden,
Switzerland, UK), Pacific and Asia (Australia, India).
Heritage Names of Distinction:
Accord, Anchor Darling, Argus, Atomac, Automax, Bättig,
Durco, Edward, Gestra, IPSCO, Kämmer, Limitorque,
McCANNA, NAF, Naval, Noble Alloy, Norbro, Nordstrom,
Polyvalves, PMV, Schmidt Armaturen, Serck Audco, Sereg,
Valtek, Vogt, Worcester Controls
Flowserve Pumps
Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or breadth
of expertise in the successful application of pre-engineered,
engineered and special purpose pumps and systems.
Flowserve Pumps produces products for many industrial market
segments, including the oil and gas, chemical, power, hydrocarbon
processing and water resources industries.
Through its Pumps, Flowserve has earned the reputation as a world
leader in the supply of highly engineered pumps. For example,
Flowserve is recognized throughout the process industry as a leader
in the supply of ASME (ANSI) and ISO alloy and nonmetallic pumps
for corrosive, toxic and other severe chemical duties. Flowserve
produces a wide range of heavy-duty, high-horsepower pumps for
oil and gas production and pipeline services. Additionally, the division
offers pumps for every conceivable hydrocarbon processing
application. In fact, Flowserve offers the world's most complete
line of API 610 pumps with the widest range of hydraulic coverage,
pressure and temperature capabilities. Flowserve also offers horizontal and vertical pumps with specialized designs for water resources
and for combined cycle, fossil fuel and nuclear power generation.
Flowserve Flow Solutions
Flow Solutions manufactures and markets highly engineered
mechanical shaft seals for containing corrosive, volatile,
abrasive, precious, or flammable fluids. Flowserve
mechanical seals are used on pumps, compressors,
mixers, steam turbines and other rotary-motion equipment.
Flowserve offers a complete line of seals including cartridge
seals, dry-running seals, metal bellows, elastomer bellows,
split seals and gas barrier seals for zero emissions.
Flowserve also provides compression seals, bearing
protection devices and seal chamber auxiliary equipment.
Flowserve offers innovative seal design and responsiveness,
as well as development of new technologies that produce
lower maintenance and operating costs.
Heritage Names of Distinction:
BW Seals, Durarnetallic, Five Star Seal, Pacific Wietz,
Pac-Seal, GASPAC
Flowserve Pumps has a global presence with specialized engineering
and primary manufacturing capabilities in the Americas, Europe
and Asia. The division also supplies products and services from
quick response centers throughout the world, where assembly and
technical specialists provide immediate local support to Flowserve
pump users.
Heritage Names of Distinction:
ACEC CentrifugaI Pumps, Pleuger Pumps, Aldrich Pumps, Scienco
Pumps, Byron Jackson Pumps, Sier-Bath Pumps, Carneron Pumps,
Stork Engineered Pumps, Durco Pumps, United CentrifugaI Pumps,
Flowserve Pumps, Western Land Roller, Irrigation Pumps, IDP
Pumps, Wilson-Snyder Pumps, Jeurnont-Schneider Pumps,
Worthington Pumps, Pacific Pumps, Worthington-Sirnpson Pumps
3
Application Category
Page
6-7
8-9
General Application
The majority of control valve applications fall into the general application category.
The typical pressure rating for these (linear and rotary) valves does not exceed PN40 or
ANSI Class 300. General service valves do not require special engineering so standard
options will cover most applications.
Page
15
Special / Others
In certain control applications the use of standard globe valves is not possible. This is why
Flowserve has developed other control valves than standard such as split body or ball
sector valve. Flowserve has also developed special products used for process control as
a complementary product for the control valve. This could use the fundamental principle
of the control valve such as the self-acting regulator or in upstream or downstream the
control valve some application using a standard globe or to be associate to the valve
itself in desuperheater system for example.
16
Severe Services
Severe service is defined as applications which have excessive noise, cavitation, erosion,
or high pressure drops. Most valves in these categories require special design work,
resulting in the use of special materials or trim designs. Flowserve offers the most
comprehensive range of solutions to minimise or eliminate cavitation, erosion and noise.
17 Custom Engineered Products
Flowserve accumulated a long the years a strong experience in developing special
features on control valves or complete dedicated product for specific application.
The engineering departments of Flowserve around the world have network connection,
which allow the customer to be sure that the solution we provide is the best design in
regards to his specific demand. The Flowserve’s experience allow us to be recognize as
one of the leading company to provide technical solution for process control for industry
on critical applications.
Low Temperature
& Cryogenic
By using an extended bonnet, the packing, gaskets and seals are protected from
cryogenic temperatures, thus ensuring their sealing properties. Optional special gaskets
and packings can be used to operate at temperatures as low as -272°C. Depending on the
application, Flowserve cryogenic valves are available with a top entry design for the easy
maintenance of valves located in a cold box or with a simple extended bonnet attached to
the valve body.
10-11 Medium - High Pressure
Valves with pressure classes above PN40 or ANSI Class 300 are considered by Flowserve
as "high pressure" designs. Based on decades of proven experience and expertise,
Flowserve can supply the best high-pressure control valves on the market with pressure
classes up to PN4000 / ANSI Class 4500 and above.
12
Low Flow & Micro Flow
For Flowserve, a Low Flow valve is a valve with a range of Cv value between 0,01 to 4,7.
Flowserve manufactures also Micro Flow valves designed to offer lower Cv than 0,01 and
down to 0,0000012. In the Flowserve control valve portfolio a wide range of valves are
designed to offer both range of Cv value. These products are widely used for applications
in laboratories and industrial research departments as well as industrial processes
requiring high degrees of control accuracy.
13
Corrosive
Corrosive fluids, including both gases and liquids, require special attention when it comes
to the materials used to build the valve and Flowserve offers a wide range of choices for
these applications. The company has experience in building valves from Carbon Steel,
Stainless Steel, Titanium, Hastelloy, Alloy 6, Inconel, Monel, and many, many others.
For fluids that require even greater chemical resistance, Flowserve offers a variety of
solid plastic and plastic lined valves.
18-19
Actuators
The function of the actuator is to adjust the opening of the valve according to the
instrument signal in order to ensure correct control of the process fluid. Depending on
the actuator selected, the valve position may be open or closed, as in the case of isolating
valves, or continuously modulating in the case of the control valves. Flowserve offers
different types of actuators according to the thrust or torque required (pneumatic, electric,
or hydraulic) to operate rotary or linear control valve designs.
14
Sanitary & Aseptic
In the food and beverage industry as well as in biotechnology, pharmacy and other areas
where perfect cleanliness and sterile valves are required, Flowserve has the solution.
Our products meet the USDA and 3A requirements and can be supplied for Clean In Place
(CIP) and Steam In Place (SIP).
20-21
Digital Positioners
14
Utility
Flowserve is able to offer one of the widest range of Digital positioner available on the
market. From a purely Digital positioner without any communication through the Hart and
to Fieldbus communication. The large variety of demands has conduct also Flowserve to
offer three different Digital positioner platform to be able to cover all of the needs we
meet in the industry.
In the control valve industry valves are not only used for process flow applications but
also to transport all of the utilities fluids around the different process units (for example
water, steam, air and other fluids). There are similar requirements in the Heating,
Ventilation and Air Conditioning Industry. Most of these applications do not require
sophisticated valve designs and Flowserve has developed a low cost standard product
range to suit this sector of the industry.
22-23
24-25
4
Positioners
- From pneumatic to
intelligent control system
Accessories
Flowserve standard positioner range comes from pneumatic to analog with different
hazardous area classifications to serve the different market needs. Flowserve has also
developed combine system with control valve, pressure and temperature sensor, PID
control loop to offer the first Intelligent Control system into the market.
Flowserve manufactures a range of limit switch boxes, position transmitters and flow
boosters.
5
General Application
Design
Linear
Rotary
Linear Globe
Plug Head Guiding
Special Features
Eccentric Rotary Plug
High Performance
Butterfly Valve
High Performance
Butterfly Valve
Ball Sector Valve
Full Bore Ball Valve
Special Features
FlowTop
XSTREAM & Silentpack
MaxFlo 3
Torex
Valdisk / BX
Setball
Duball
Setball Z Trim &
Trimball
Product
Type
Size Range
15 to 300mm (½ to 12")
• XStream is an efficient, modular design with standardized
combinations for noise reduction and cavitation control
25 to 300mm (1 to 12")
80 to 600mm (3 to 24")
50 to 760mm (2 to 30")
25 to 500mm (1 to 20")
25 to 500mm (1 to 20")
• Attenuation < = 15dBA
• Easy upgrade of standard control valves to XStream design
(*no change of the trim set)
Pressure Rating
End Connections
Class 150 to 300
PN10 to 40
• Attenuation: up to 20 dBA
• Moderate clogging potential
• Tight shutoff
Class 150 to 300
PN10 to 40
Class 150 to 300
PN10 to 40
Class 150 to 300
PN10 to 40
Class 150 to 300
PN10 to 40
Class 150 to 300
PN10 to 40
Flanged, Flangeless
Wafer
Lugged
Wafer
Lugged
Flanged
Wafer
Flanged
• For gas and steam service to reduce noise: Available with up to 3
downstream cages in combination with all parabolic plug designs
Flanged
Butt Weld
• For anti-cavitation service: Additional upstream seat-cage to
minimize the energy before the seat area
Carbon Steel
Stainless Steel
Carbon Steel
Stainless Steel
Stainless Steel
Carbon Steel
Stainless Steel
Stainless Steel
Stainless Steel
Temp. Range (°C)
-196 to +450(DIN) / +538(ANSI)
-73 to +400
-30 to +350
-100 to +1000
-30 to +250
-30 to +350
Shut Off Class
IV to VI
IV and VI
PTFE seat
SS-ISO 5208-2 Rate A
DIN 3230 BN Leakrate 1
Metal seat
Class V
IV and VI
PTFE seat
SS-ISO 5208-2 Rate A
DIN 3230 BN Leakrate 1
Metal seat
Class IV-S1
PTFE seat
SS-ISO 5208-2 Rate A
DIN 3230 BN Leakrate 2
Metal seat
Class V
• For gas and steam service to reduce noise: Wire wrapping
package within a frame in combination with all parabolic plug
designs
Cv Range
0.012 to 1850
• Easy upgrade of standard control valves to Silentpack design
(no change of the trim set)
7 to 3600
245 to 24267
62 to 31000
1.75 to 13900
73 to 29000
Main Features
•
•
•
•
•
•
• Attenuation: up to 18 dBA
• Non-crossover shaft
• Anti blow-out system
• High Cv capacity
• Triple offset design
• Double offset design
• Excellent high cycle tightness
• V-shaped sector
• Heavy-duty 2-piece ball valve
• Excellent tightness in both
flow directions
• Other body material on
request
• Noise attenuator available
• Low emission packing
• Different seat reduction
available
• Brewery application
• Alloy body material available
• Fire safe design
• Internally polished body
and disk
• Stem sealing for vacuum
Options
6
Direct mounted accessory
High flow coefficient Cv
Screwed seat with profil-ring
AK7 according to DIN 19251
Modular design
Meets the requirements for SIL
3/4 according to IEC 61508
• 3-way valves DN25 to DN200
• TA-Luft packing up to +400°C
• Low noise and anti-cavitation:
Silentpack / Perforated plug /
RLS / XStream
• DVGW certification up to
DN150 (6")
• Special body material
• Steam jacket
• Bellows
• Top and bottom guiding
• Electrical actuators
• Higher clogging potential
• Longer valve stroke and precisely machined contour for
greater rangeability
• Sturdy Post style guide provides stable trim under all pressure
drops
• High Cv gallery means smaller valve sizes
• Excellent Flow Characteristics
• Alloy body material available
• Four seat designs
• Z-Trim DN50 to 400 (2 to 16")
• For cavitation and noise
reduction
• Alloy body material available
• The design is based on a ball
sector valve with trim which
split the flow in many smaller
flows and the pressure drop in
3 steps which offers major
control benefits
• A V-shaped sector provides
accurate control over a wide
range, even at low flow rates
Body Materials
• Silentpack is an efficient, modular design with standardized
combinations for noise reduction
Setball Z Trim
•
•
•
•
•
Ceramic version
Fire safe
Anti-static
Pocket ball valve
A-trim or Z-trim DN50 to
250 (2 to 16")
• For cavitation and noise
reduction
• Alloy body material available
• The shapping of Z-trim makes
it possible to use the valve for
media with some solid part
e.g. pulp, without risk to plug
the valve
Trimball
• Attenuation < = 25dBA
• Tight shutoff
• The Trimball is a ball with
a large number of small zigzag
channels. When the flow is
controlled from the closed
position, the channels will be
open one by one
• Up to the half open position,
the medium will be recirculated
between the ball and the valve
body. As a result, the medium
will be forced to flow through
two channels lengths, which
result in very gradual opening
of the valve
• After the ball valve has been
opened through an angle of 45°,
the channel will be gradually
exposed, so that the medium
will flow through the channels
only once
• Every channel comprises a
large number of deflections,
which enables the pressure
drop to take place in many
small steps
7
Low Temperature & Cryogenic
Design
Linear Angle
Top Entry
Linear Angle
Top Entry
Linear Angle
Top Entry
Linear Z Form & Angle Valve
Top Entry
Linear Globe
Top Entry
Special Features
041000
141000
241000
Bättig
Mark Six
Cryogenic Valve Testing
Product
Type
Size Range
25 to 400mm (1 to 16")
25 to 100mm (1 to 4")
4 to 150mm (1/6 to 6")
6 to 100mm (¼" to 4")
15 to 300mm (½ to 12")
Pressure Rating
Class 150 to 600
PN10 to PN63
Class 150 to 600
PN10 to PN63
Class 150 to 300
PN10 to 40
Class 150 to 1500
PN10 to 250
Class 150 to 4500
End Connections
Butt Weld
Butt Weld
Butt Weld
Screwed
Butt Weld
Flanged
Screwed
Butt Weld
Flanged
Body Materials
Aluminium
Aluminium
Stainless Steel
316L
1.4435/4404
1.4571
Stainless Steel
Stainless Steel
Nickel Alloys
Bronze
Temp. Range (°C)
Down to -196
Down to -196
-270 to +150
Down to -269 (4°K)
Down to -218
Shut Off Class
Up to VI
Up to VI
Up to VI
10 -7 mbars l/s
Up to VI
Cv Range
0.12 to 730
0.12 to 185
0.0012 to 647
0.0012 to 470
0.014 to 400
Main Features
• Top entry up to DN100mm (4")
• Stainless Steel extension bolted
• Top entry
• Transition joint friction welded between
Aluminum body and Stainless Steel
extension
• Top entry
• Cryogenic extension welded on body
• Top entry
• Stream lined, light weight body for
reduced heat transfer
• Top entry for easy service without breaking
down the cold box
Options
• Bellow seals
• Stainless Steel body material
• Bellow seals
• Bellows seal
• Soft seat
• Cover plate for vacuum sealing
• Ambient temperature valves for gas
¼ to 6"
• Pressure rate PN10 to 400 bars
• Cryogenic check valve
• Special flange for cryogenic application
on request
• Vacuum collar for insulation
• Manual operator
•
•
•
•
8
Product / Specialist Knowledge:
The Flowserve Top entry cryogenic valve is the answer for gas liquefaction and
air separation applications. Due to their installations on cold box unit, the
Flowserve Top entry cryogenic valves are designed to offer the possibility to
disassemble all internal trim parts from the Top. This allows the valve to be
welded in line without any disassembly for maintenance operations.
"Y" type body
Rubber boot
Seal boot
Metallurgical development with gold
vacuum brazing
• Monel and Copper
9
Medium Pressure
Design
Linear Globe
Plug Head Guiding
Linear Globe
Plug Head Guiding
035000
FlowPro
High Pressure
Linear Globe
Linear "Y" Style Globe
Double Top Stem Guiding Double Top Stem Guiding
Linear Globe Plug
Double Top Stem Guiding
Linear Globe
Cage Guiding
Linear Angle Body Plug Head Guiding
Mark 100
Revca
010000 Series
Product
Type
Mark One
Mark Eight
Size Range
15 to 150mm (½ to 6")
25 to 300mm (1 to 12")
15 to 1200mm (½ to 48")
15 to 350mm (½ to 14")
DN150 to 400mm (6 to 16")
20 to 500mm (¾ to 20")
3 to 16mm (1/ 8 to 5/ 8")
16 to 45mm (5/ 8 to 1¾")
45 to 90mm (1¾ to 3½")
Pressure Rating
Up to 2500
Up to PN400
Class 600
Class 900 (1 to 6")
PN63 to 160
Up to 2500
Class 150 to 1500
Class 150, 300 and 600
(¾" to 6") Class 150 to 600
(8" to 16") and 20" Class 600
(1" to 10") Class 900 to 1500
(1" to 8") Class 2500
Up to 60000 psi
Up to PN4000
Up to 10000 psi
Up to PN700
Up to PN325
End Connections
Flanged
Flanged
Butt Weld (DIN)
Flanged
Butt Weld
Socket Weld
Screwed
Flanged
Butt weld
Socket weld
Screwed
Flanged
Butt weld
Flanged
Butt Weld
Screwed
Threaded
Screwed flange according to IG
standard
Threaded
Screwed flange according to IG
standard
Screwed flange according to IG
standard
Body Materials
Carbon Steel
Stainless Steel
Carbon Steel
Stainless Steel
Carbon Steel
Stainless Steel
Nickel Alloys
Stainless Steel
Carbon Steel
Other Castable material
Stainless Steel
Carbon Steel
Stainless Steel
Carbon Steel
Stainless Steel
WNR 1,4429
Stainless Steel
WNR 1,4429
Stainless Steel
Temp. Range (°C)
-196 to +400
-196 to +530
-196 to +815
-195 to +815
-196 to +815
-200 to +550
-30 to +400
-30 to +400
-30 to +400
Shut Off Class
IV to VI
IV, V
IV to VI
IV and VI
IV to VI
II to VI
IV to VI
IV to VI
IV to VI
Cv Range
0.012 to 460
0.18 to 1850
0.18 to 462 (Class 900)
0.46 to 11000
19.2 to 3060
429 to 3021
0.12 to 3000
0.0000012 to 2.9
0.12 to 46
0.12 to 46
Main Features
• Compact and lightweight
• Wide variety of alloy material
•
•
•
•
•
•
Direct mounted accessory
High flow coefficient Cv
Screwed seat with profil-ring
AK7 according to DIN 19251
Modular design
Meets the requirements for SIL
3/4 according to IEC 61508
• Versatile body
• High pressure drops
• Low noise and anti-cavitation
trims
• "Y" type body
• High Capacity
• Versatile Body
• Low noise and anti-cavitation
trims
• High pressure drops
• Low noise and anti-cavitation
trims
• Large cavity body
• Split body
• Split body
• High pressure drops
Options
•
•
•
•
•
•
•
•
•
•
•
Special body material
Angle body design (DIN)
3-way valves DN 25-200 (DIN)
Low noise and Anti-cavitation:
Silentpack / Perforated plug /
RLS / XSTREAM
Bellows seal
Low maintenance packing
TA Luft packing up to +400°C
Electrical actuators
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Bellows seal
• Leak off connection
•
•
•
•
•
•
•
•
• Bellows seal
• TA-Luft packing
Angle, 3-way
Bellows seal
Cryogenic bonnet
Steam jacket
Multi hole cage plug
TA-Luft packing
•
•
•
•
10
Angle, 3-way
Bellows seal
Cryogenic bonnet
Steam jacket
CavControl trim
ChannelStream Trim
MegaStream Trim
TigerTooth Trim
Stealth Trim
CavControl trim
ChannelStream Trim
MegaStream Trim
TigerTooth Trim
Stealth Trim
CavControl trim
ChannelStream Trim
MegaStream Trim
TigerTooth Trim
Stealth Trim
Hastelloy C body
Bellows seal
Cryogenic bonnet
Seat and plug in ceramic or
tungsten carbide
• PTFE soft seat
• TA-Luft packing
• DIN/ANSI flange
Hastelloy C body
Bellows seal
Cryogenic bonnet
Seat and plug in ceramic or
tungsten carbide
• PTFE soft seat
• TA-Luft packing
• DIN/ANSI flange
11
Low Flow & Micro Flow
Design
Corrosive
Linear Globe
Casting Body
Linear Globe
Bar Stock
Linear Globe
Forged body
Linear Globe
Forged Body
Special Features
Linear Globe
Plastic Valve
Linear Globe
Lined Body
Special Features
030000
080000
185000 / 285000
Epsy
Low Flow Experience
032000
132000
Lining & Belows Detail
Product
Type
Size Range
10 to 25mm (½ to 1")
6mm (¼")
15 to 25mm (½ to 1")
15 to 25mm (½ to 1")
Pressure Rating
Class 150 to 300
PN 10 to 40
Class 150 to 2500
PN10 to 400
Class 150 to 2500
PN10 to 400
Class 150 to 300
PN 10 to 100
Flanged
NPT
End Connections
Flanged
Screwed NPT, G
Screwed NPT, G
Screwed NPT, G
Flanged from DN10 to DN25
Flanged
Butt Weld
NPT
Body Materials
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Carbon Steel
Temp. Range (°C)
-30 to +400
-30 to +400
-196 to +400
-196 to +430
Shut Off Class
IV to VI
IV to VI
IV to VI
Cv Range
0.0012 to 2.9
0.0000012 to 2.9
Main Features
• Casting design
• Compact control valve
Options
• Bellows seal
12
• Low Flow valves from ¼" to ½" valve sizes and
pressure classes up to PN400 or ANSI class
2500.
• The large Cv range from 0,0000012 up to 2.9
with reproducible characteristics and Cv values
are unique in the market.
• Various body materials and end connection
designs for almost all applications and
customer needs.
15 to 50mm (½ to 2")
15 to 100mm (½ to 4")
Class 150
PN10
Class 150
PN16
Flanged
Flanged
PP, PVC, PVDF
Lined Ductile Iron 0.7043
-10 to +150
-10 to +200
IV to VI
IV to VI
IV to VI
0.0000012 to 2.9
0.01 to 3.5
0.11 to 46
0.012 to 210
• Compact valve with the
actuator
• Laboratory application
• Compact valve with the
actuator
• Laboratory application
• Forged straight body
• High differential pressures
• Plastic valve
• PTFE internal parts
• Bellow
• Lined body
• PTFE internal parts
• Bellow
• Angle
• Bellows seal
• Angle
• 3-way valve
• Cryogenic extension
• Cryogenic extension
• Bellows
• Double packing box
• Plug and seat in Tantalum or
Hastelloy for low Cv
• Different lining material
Hastelloy C276 bellows
• The extreme low Cv value are hand made with
permanent control through the manufacturing.
By using reference model we are able to
duplicate the plug to obtain the same Cv.
• Laboratory and Research facilities as well as
carbonating equipment or large production
plants with exact and precise control requirements are the main application fields for Low
Flow Valves.
• The Series 132000 control valve completes the
range of lined valves within the FLOWSERVE
corporation. Many years of experience in the
manufacture of lined ball and plug valves and
the sophisticated experience of manufacturing
excellent reproducible trims for linear valves
are combined in this new product.
• High quality lining materials such as PFA
(standard), PVDF, PP, ETFE and FEP as well
as PFA antistatic cover most mediums and
applications. The revolutionary PTFE bellows
design allows a standard pressure rating of
PN16.
• T-grooves provide an extremely positive
connection between the liner and the valve
metal body, especially important in vacuum
applications.
13
Sanitary & Aseptic
Design
Utility
Special/Others
Linear Angle CIP/SIP
Special Features
Linear Globe
Compact Design
Pressure Reducing
& Relief Valve
Desuperheater
Injection Nozzle Valve
Linear Angle Injection
Nozzle Valve
Linear Globe Split Body
Ball Sector Valve
191000
Designed For Aseptic Applications
FlowPak
SelfAct
Varicool
Vaporcool
025000
V-Flow
Product
Type
Size Range
10 to 100mm (½ to 4")
15 to 100mm (½ to 4")
15 to 200mm (½ to 8")
pressure reducing
15 to 100mm (½ to 4")
pressure relief
For steampipe: DN 150 to 1000
(6 to 40"). Waterconnection: DN
25, 40 / 1, 1½". Steamconnection:
DN 80, 100 / 3", 4", 6"
25 and 40 (1 and 1½)
(Water connection for steampipe
DN 150 to 1000 / 6 to 40")
25mm (1")
15 to 150mm (½ to 6")
Pressure Rating
Class 150
PN10 to 16
Class 150 Soft
PN10 to 16
PN10 to 40
PN 40 to 160
Class 300 to 2500
PN 40 to 160
Class 300 to 2500
Class 150 to 2500
PN10 to 400
Class 150 to 300
PN10 to 40
End Connections
Clamped
Butt Weld
Threaded
Flanged
Flanged
Flanged
Flanged
Flanged
Flanged
Screwed
Flanged
Butt Weld
Socket Weld
Screwed
Carbon Steel
Stainless Steel
Ductile Iron
Cast Steel
Stainless Steel
Stainless Steel:
1.4571, A182 F304
Carbon Steel:
1.7335, A182 F12
Carbon Steel
Stainless Steel
Stainless Steel
Carbon Steel
Stainless Steel
Nickel Alloys
-10 to +250
-10 to +400
-10 to +530
-10 to +530
-196 to +400
-30 to +300
IV, IV-S1 and VI
DIN 3210, part 3/BO,
Leakage rate 1
IV and V
IV
IV to VI
VI
The type 191400 is the prime choice for nearly all applications
in the food and beverage industry. Because of it's optimized
body design the valve is pocket free so that bacteria or any
other kinds of contamination are avoided. The seat is an integral
part of the body to avoid additional gaps. The O-Ring packing
and general bonnet design ensure a very compact overall
height. The stem is guided by a PTFE bushing for precise
control, reduced friction and minimal wear. A wiper ring is
provided to protect against contamination from the outside.
Repair, maintenance or the replacement of individual parts is
easy to perform because the body and the bonnet are connected
together by a clamp.
Body Materials
Stainless Steel
Temp. Range (°C)
-25 to +180
Shut Off Class
IV
Cv Range
0.012 to 190
0.18 to 208
2.1 to 295 pressure reducing
3.5 to 100 pressure relief
0.15 to 7.3
0.02 to 20
0.12 to 11.5
8 to 1880
Main Features
• 3A, FDA, USDA approval
•
•
•
•
•
•
•
•
•
• Complete atomisation
• Lowest Dp atomisation
available
• No moving parts
• Quick change multi-nozzle
spray head
•
•
•
•
No cooling valve necessary
Patented nozzle design
Easy changeable nozzle design
Differential pressure up to
90 bar
• Modular design
• Split body design
• Characterised control seat
• Ball plug
• Modular design
• Installation set
• Strainer
• Installation set
• Strainer
• Electric actuator
•
•
•
•
•
•
• Cryogenic and high integrity
different soft seat material
Options
14
• Test port connection
• Aseptic diaphragm
• Aseptic bonnet
Both valve types 191700 and 191800 were developed for
aseptic applications in the pharmaceutical industry as well as
bio-technology and ultra clean applications. An aseptic
diaphragm made from EPDM with a TFM coating is used to seal
the media from the environment. To extend the lifetime of the
diaphragm a support ring is installed on the reverse side of the
diaphragm. Type 191700 with aseptic diaphragm without a stem
O-Ring seal but with leakage detection hole in case of diaphragm
damage. Type 191800 with an additional O-Ring seal and ¼" NPT
test port for leak detection. Both versions use the same body,
aseptic diaphragm and plug heads but have different bonnets
and stems.
Modular design
Cast yoke design
High flow coefficient Cv
DIrect mounted accessory
• TA Luft packing
• Electrical actuators
Maintenance free design
Bellows seal design
Stainless steel trim
Modular design
Delivery from stock
• Vessel (above +100°C a water
filled vessel is necessary)
Angle
3-way valve
Cryogenic extension
Soft seat
TA-Luft packing
Bellows
15
Severe Services
Design
Cavitation Control
Liquid Services
Cavitation Control
Liquid Services
Custom Engineered Products
Noise Reduction
Gas Services
Noise Reduction
Gas Services
Product
Type
Linear Globe Y-Design
Tank Flush
Special Features
Sweep Angle Severe
Application
Multi-Stage Trim Type
Large Solids Capability
Angle Valve With
Integrated Actuator
051000
051000
Survivor
Multi-Z
Uboot
Product
CavControl
ChannelStream
MegaStream
Tiger-Tooth
Size Range
25 to 300mm
(1 to 12")
40 to 350mm
(1½ to 14")
25 to 900mm
(1 to 36")
40 to 900mm
(1½ to 36")
Pressure Rating
Class 150 to 2500
Class 150 to 2500
Class 150 to 2500
Class 150 to 2500
Temp. Range (°C)
Up to 650
Up to 650
Up to 816
Up to 650
Max. Pressure
1034 bar
1034 bar
1034 bar
1034 bar
Cv Range
1.5 to 1000
4 to 720
3.4 to 10056
4 to 4000
Flow Direction
Over the plug
Over the plug
Under the plug
Under the plug
Dirty Service
Low clogging potential
High clogging potential
Moderate high
clogging potential
Low clogging potential
Main Features
• 1.2< = Sigma< = 1.5
• Tight shutoff
• Sigma > = 1.002
• Tight shutoff
• Attenuation < =
30dBA
• Attenuation < =
30dBA
Design
• CavControl controls
cavitation damage by
relocating the cavitation
bubbles away from
metal surfaces. It utilizes
a number of diametrically
opposed holes to isolate
cavitation by impinging
a cavitating jet of fluid
on similar jet created on
the opposite side of the
retainer. Impinging jets
create a column of
cavitation in the center
of the retainer. Small
stepped holes are used
to relocate the venna
contracta away from
metal surfaces, further
reducing cavitation
damage.
• ChannelStream
eliminates cavitation by
using a series of holes
and channels to reduce
the pressure in stages.
Pressure reduction
mechanisms include
impingement, expansion
and contraction, and
small passages. More
stages can be added as
required by the design
pressure drop.
• MegaStream eliminates
valve noise by controlling pressure reduction
and gaseous turbulence.
Pressure drops are taken
in multiple stages, with
attenuation taking place
at each stage.
• TigerTooth uses stacked
disc sets with grooves
or teeth to take multiple
stage pressure drops.
Sudden expansions and
contractions occur over
each tooth to create
staged pressure drops.
• MegaStream uses
nested cylinders in
place of the seat retainer.
Each drilled cylinder
represents a stage of
pressure reduction.
• TigerTooth stacks are
used in place of the valve
seat retainer.
• CavControl uses a
drilled hole seat retainer.
• ChannelStream uses a
set of nested cylinders
in place of the seat
retainer. Each cylinder
has a set of holes and
intersecting channels
around the outside
diameter. In the channels
flow is accelerated, in
each hole the pressure
recovers.
One contraction and
expansion comprises
a stage, leading to one
stage for each cylinder.
• ChannelStream eliminates cavitation and the
damage caused by the
effects of cavitation.
16
Design
• MegaStream uses
three or more stages.
MegaStream II utilizes
one or two stages while
using standard Mark I
parts for lower cost.
• Used in both gas and
liquid applications
TigerTooth can be used
to eliminate cavitation
or attenuate noise.
Type
Size Range
25 x 15 to 250 x 200mm
(1 x ½" to 10 x 8")
Pressure Rating
Class 150 to 300
PN10 to 40
End Connections
Flanged
Butt Weld
Body Materials
Stainless Steel 1.4571
Temp. Range (°C)
-20 to +400
Shut Off Class
IV to VI
• This unique valve is typically
used for On-Off bottom drain
tank applications, where
flushing or fluid transfer
is necessary. The valve
mounts flush to the tank with
a plug extending into the tank
with the seat ring flush with
the inner wall of the tank.
25 to 350mm (1 to 14")
25 to 100 mm (1 to 4")
DN10 to DN100
Class 150 to 1500
PN40 to 400
Class 300 to 2500
PN25
• The valve's compact,
lightweight design is ideal for
in-line maintenance under the
tank. It can be specified with
either a 45° or 60° outlet
angle.
Flanged
Weld Ends
Flanged
Screwed NPT
Weld Ends
Flanged
Screwed NPT
Carbon Steel
Stainless Steel
Titanium
Inconel
Carbon Steel
Stainless Steel
CrMo Steel
Stainless Steel
1.4541 (321 SST)
1.4404 (316L SST)
1.4435 (316L SST)
-10 to +400
-10°C to 400°C
• Other options include
bellows seal, normalizing fins,
a special body without pockets,
steam jacketing or a plug that
retracts into the body
(as opposed to the standard
design with an extended plug).
IV
• The tank flush valve can also
be supplied as a control valve.
Cv Range
4.6 to 645
Main Features
Options
• A soft seat option is also
available on differnent design.
8 to 2604
Individually to service
conditions
Individually to service
conditions
• Tank flush valve - outlet angle
45º or 60º
• Specially designed for severe
service slurry
• Wiper rings
• Extended venturi seat design
• Specially designed for severe
flashing in erosive services
• Linear Multi Stage design
(3, 4 or 5 stages)
• Venturi outlet nozzle
• Balanced or unbalanced plug
design
• Solids up to 0.5"
• High rangeability
• Other materials available
• Bellows
• Different body and trim
material available including
ceramic and titanium
• Plug and seat material in
accordance to application
• Cv value to be designed to
actual conditions
• Application:
Liquid gases (Helium,
Nitrogen, Oxygen etc.)
The U-Boot valve is completely
installed inside a vacuum box
for thermal insulation.
Operating actuator gas is
either Nitrogen or Helium
and will be provided to the
actuator for venting and
exhausting. The actuator
diaphragm is made of a
stainless steel bellows with
fail position option based off
one or two springs. The valve
itself is always equipped with
a stainless steel bellows.
Every valve is engineered and
calculated in accordance with
the actual conditions for each
particular application.
17
Actuators
Design
Linear
Rotary
Diaphragm With
Spring Return
Diaphragm With
Spring Return
Diaphragm With
Spring Return
Diaphragm With
Spring Return
Diaphragm With
Spring Return
Piston With
Spring Return
Diaphragm With
Spring Return
Piston With
Spring Return
Link Coupling
Rack & Pinion
FlowAct
Series 1
Series 2
Series 3
Series 4
Cylinder
NR
VL Cylinder
Turnex
SuperNova
Product
Type
Supply
Up to 6 bar
Up to 4.5 bar
Up to 6 bar
Up to 6 bar
Up to 4 bar
Up to 10 bar
Up to 4 bar
Up to 10 bar
Up to 8 bar
Up to 10 bar
Number of Sizes
6
2
4
2
4
8
3
4
11
11
Diaphragm / Piston
Area cm²
125 to 3000
26 and 80
120 to 1200
17000 and 3200
80 to 1000
153 to 3800
110 - 350 - 750
153 to 1212
20 to 804
79 to 2827
Force or Torque
Up to 90 KN
0.6 to 1.6 KN
0.6 to 34 KN
Up to 100 KN
0.4 to 20 KN
31 to 155 KN
8.6 to 2880 Nm
130 to 2960 Nm
100 to 20000 Nm
8 to 5005 Nm
Stroke or Angle
Up to 100mm
10mm
Up to 80mm
Up to 80mm
Up to 40mm
Up to 600mm
Up to 80°
Up to 90°
Up to 96°
Up to 100° as standard
Extended travel options
Temp. Range (°C)
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-30 to +80
-40 to +177
-40 to +80
-40 to +177
-30 to +80 Standard
-40 to +80 Low temperature
-30 to +80 Standard
-50 to +80 Low temperature
-30 to +150 High temperature
Handwheel
Top mounting up to size 700
Side mounting 1500 to
3000"
N/A
Top mounted
Top mounted
Top mounted
Side mounted
Top mounted
Side mounted
End shaft mounting
Extra long screw
Base mounting
Options
• Travel stop
• Top handwheel in "light"
and "heavy" design
• Travel stop
• Travel stop
• Travel stop
• Integrated positioner
• Integrated limit
switches
•
•
•
•
•
• Travel stop
• Travel stop
• Field reversible
• Locking device
• For -40ºC
• 180º Option
• Stainless Steel pinion
• Star shaped pinion drive
Remarks
• Universal yoke designed
in response to VDI/
VDE and Namur
standard mounting
for positioners and
accessories.
Also available for
the semi-integrated
Flowserve positioner
Logix 500si
• Field reversible
• Complete stainless steel
actuator designed for
corrosive atmosphere
and suitable for all
Flowserve valves
• Field reversible
• Heavy duty actuator to
develop high thrust for
large valves
• First diaphragm
actuator in aluminium
developed for chemical
indisutry and suitable
on all Kämmer valves
18
• Very compact actuator
developed for low flow
valve that requires
small bulk
• First diaphragm
actuator in aluminium
designed for chemical
industry and suitable
on all Kämmer valves
Travel stop
Lever actuator
Field reversible
Carbon steel
High cycle
• Designed especially to fit on the
MaxFlo 3 rotary valves to offer
high accuracy and control
• Available for both 60 and 80°
rotation
• Field reversible
• ISO 5211or DIN 3337 for valve
connection
• NAMUR for solenoid valve
connection
• NAMUR for limit switch,
positioner and other accessories
19
The Flowserve Digital Positioner Family
Type
Logix 500si Series
Logix 800
Logix 1400 Series
Logix 3200 IQ
Product
The Flowserve digital positioner family is designed to cover a wide range of applications. Due to their
modular concept they are extremely versatile. The Flowserve positioner range meets any requirement
from non-communication to Fieldbus, using the same housing.
Applications
Automation The Flowserve digital positioner can be used
on isolating valves. Mounting kits to VDI/VDE 3845 are
available for all actuator sizes.
Communications
Applications
Output
Profibus PA
•
Foundation Fieldbus
•
•
4-20mA Digital
•
•
Control
•
•
•
•
Automation
•
•
•
•
Maintenance
Process
•
•
•
•
Single Acting
•
•
•
•
The local LED display indicates the current status of the
positioner using a series of four blinks of 3 different colours.
Double Acting
•
•
•
•
•
•
•
Housing
Stainless Steel
Hazardous Location
ATEX Intrinsically Safe
•
•
ATEX Explosion Proof
Mountings
Configuration
•
Optional Add-ons
Limit Switches
•
•
•
•
•
LCD Display
4-20mA Output
•
FM
•
•
•
•
CSA
•
•
•
•
•
•
•
•
Mountings
•
•
•
•
Conforms to VDI/VDE 3847 with direct mounting and integrated tubing connection for air to retract actuator.
VDI/VDE 3845 standard rotary mounting for rack and pinion and scotch yoke actuator.
Mounting kits designed for other brand diaphragm actuators.
Namur according to IEC 534 part 6 for mounting on a rod yoke actuator.
Direct mounting for Flowserve FlowAct actuator: direct mounting with integrated tubing connection for air to retract actuator.
Advance Diagnostic Program
•
Software Program
•
LED Status
•
Switches
•
•
4-20 mA Position Feedback
•
•
LCD Display
•
Remote Control
•
270° Rotation
•
Fail Freeze
•
VDI/VDE 3845
•
VDI/VDE 3847
•
Namur according to IEC 534 Pt 6
•
Semi Integrated
•
Quick-Cal Configuration
•
DIP Switches
•
Jog Button
•
Display Interface
20
•
Double Acting Module Double acting module is available
on the Logix 500si series for use on double acting actuators
as well as single acting.
•
Friction clutch
Optional Add-ons
•
Hart
High Air Delivery
Maintenance
Output
Configuration
DIP switches with jog button or LCD display with jog button are the easiest and fastest way to configure and calibrate a valve
during startup. Configuration on the front of the positioner allows instant programming without the need for special tools.
•
DIP Switches
•
•
•
•
•
•
•
•
•
•
•
Jog Button
•
21
Positioners - From pneumatic to intelligent control system
Design
Pneumatic
Pneumatic
Pneumatic
Analog
Analog
Analog
PID Controller
Intelligent Control System
XL
XL90
P5
XL/NT3000
XL90/NT3000
EP5
Logix 2000
StarPac
Product
Type
Supply Pressure
Up to 10 bar
Up to 10 bar
Max. 10 bar
Up to 10 bar
Up to 10 bar
Max. 10 bar
2.4 to 10 bar
Air Consumption
0.55 Nm³/h at 4 bar
0.45 Nm³/h at 4 bar
0.77 Nm³/h at 4 bar
0.55 Nm³/h at 4 bar
0.55 Nm³/h at 4 bar
0.77 Nm³/h at 4 bar
0.48 Nm³/h
0.48 Nm³/h
Air Delivery
26.5 Nm³/h at 4 bar
26.5 Nm³/h at 4 bar
20.6 Nm³/h at 4 bar
26.5 Nm³/h at 4 bar
26.5 Nm³/h at 4 bar
20.6 Nm³/h at 4 bar
20.1 Nm³/h
20.1 Nm³/h
Input Signal
0.2 to 1 bar
0.4 to 2 bar
0.2 to 1 bar
0.4 to 2 bar
0.2 to 1 bar
Split range available
4 to 20mA
Split range available
4 to 20mA
Split range available
4 to 20mA
Split range available
Modbus
Modbus
Output Signal
0 to 100% of supply
0 to 100% of supply
0 to 100% of supply
0 to 100% of supply
0 to 100% of supply
0 to 100% of supply
0 to 100% of supply
1 to 100% of supply
Stroke or Angle
45° rotation
12.7 to 203mm
90° rotation
30 to 360° rotation
45° rotation
12.7 to 203mm
90° rotation
30 to 360° rotation
Temp. Range (°C)
-29 to +80 (-40 in option)
-29 to +80 (-40 in option)
-40 to +85
-29 to +80 (-40 in option)
-29 to +80 (-40 in option)
-40 to +85
-40 to +76
-40 to +76
Enclosure Rating
IP66/ NEMA 4X
IP66/ NEMA 4X
IP66/ NEMA 4
IP66/ NEMA 4X
IP66/ NEMA 4X
IP66/ NEMA 4
Hazardous Area
Classifications
N/A
N/A
ATEX II 1 G D
Cl.1, Div.1, Grp B, C, D
FM/CSA Cl.1, II, III, Div.1
Grp A-E FM/CSA
II 2G, EExdIIB+H2T6
II 1G, EExiaIICT4 (Ta=80°C)
Cl.1, Div.1, Grp B, C, D
FM/CSA Cl.1, II, III, Div.1
Grp A-E FM/CSA
II 2G, EExdIIB+H2T6
II 1G, EExiaIICT4 (Ta=80°C)
ATEX, EEx ia IIC T6 II1 GD and EEx d IIC
T6 II 2 G, CSA, FM, EExiallCT6,
EExdllCT6, Div.1, Cl.1, Grp A-D,
Div.1, Cl.1, Grp B-G
Non incendive Class 1, Div 2,
Group A to G FM/CSA
Non incendive Class 1, Div 2,
Group B, C, D FM/CSA
Cenelec EExdIIB+H2 (Starpac I)
Communication
N/A
N/A
N/A
N/A
N/A
N/A
Modbus
Modbus
Limit Switches
No
Two proximity switches
Two mechanical switches
2 x mechanical, proximity,
Namur
No
Two proximity switches
Two mechanical switches
2 x mechanical, proximity, Namur
Position Transmitter
No
Analog 4 to 20mA
Analog 4 to 20mA
No
Analog 4 to 20mA
Analog 4 to 20mA
Analog 4 to 20mA
Analog 4 to 20mA
• Direct rotary mounting
• VDI/VDE 3845
• IEC 534-6
• Direct rotary mounting
• VDI/VDE 3845
• IEC 534-6
• Pipe-stand
• Side mounting on the valve
• Mounted on the valve
• Visual position indicator
"Dome"
• Optional Ultraswitch
• Oxygen service model
• Usable with either single or
double acting
• Independent zero and span
setting
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Mounting
Particularity
22
• Field convertible for I/P
• Independent zero and span
setting
• Usable with either single or
double acting
Modular
F5 direct fit
Dome indicator
Vibration resistant
High gain
Usable with either single or
double acting
• Field convertible for I/P
• Independent zero and span
setting
• Usable with either single or
double acting
Visual position indicator "Dome"
Optional Ultraswitch
Oxygen service model
Usable with either single or double
acting
• Independent zero and span setting
Modular
F5 direct fit
Dome indicator
Fail freeze
Vibration resistant
High gain
Usable with either single or double
acting
IP66 (Starpac I)
2 Analog outputs
Discrete inputs (2 channels)
Discrete outputs -alarm relay
Discrete outputs -pulse relay
2 Analog outputs
Discrete inputs (2 channels)
Discrete outputs -alarm relay
Discrete outputs -pulse relay
Measurement signal:
inlet and outlet pressure from body
and temperature
• Based on Logix 2000 technology
23
Accessories
Design
Position Transmitter
Flow Amplifier
Position Transmitter
Position Transmitter
Special Features
Position Transmitter
Pneumatic Transducer
Position Pac
Flow Booster
KM
F5
F5 Advantages
ET500
PT500
Product
Type
Supply Pressure
N/A
Up to 10 bar
N/A
N/A
Air Consumption
N/A
N/A
N/A
N/A
Air Delivery
N/A
Cv = 5.0 for supply and 3.0 for exhaust
N/A
N/A
Input Signal
N/A
Output signal from actuator
N/A
N/A
The F5 position transmiter can be either
mounted on a valve as a stand alone
product or fitted on the P5 positioner
housing. On both cases the F5 can be
used as position transmitter to send an
analog signal from the valve feedback
position or as a limit switch box to give
information on two different position of
the valve.
These two features can be used together
also; when the F5 is fitted on the P5
positioner housing, the valve feedback
position used is the same than for the
positioner itself. The P5 positioner with
F5 option can be upgraded after the
valve is on the field.
N/A
Up to 6 bar
N/A
N/A
N/A
2.4 Nm³/h at 1.5 bar
7.0 Nm³/h at 6 bar
N/A
4 to 20 mA
4 to 20 mA
0 to 100% of air supply
0 to 90°
0 to 90°
Output Signal
4 to 20 mA
Output signal from actuator,
one-to-one amplified
4 to 20 mA
0 to 20 mA
4 to 20 mA
Stroke or Angle
0 to 90°
N/A
0 to 90°
6 to 150mm
30 to 270 deg
Temp. Range (°C)
-40 to +85
-40 to +75
-25 to +85
-40 to +85
-40 to +80
-20 to +80 (-40 to +80)
Enclosure Rating
IP66/ NEMA 4X
N/A
IP65
IP66/ NEMA 4X
IP65/ NEMA 4
IP65/ NEMA 4
Hazardous Area
Classifications
Meet applicable NEMA standard: 1, 3, 4, 7,
9 and 13; explosion proof rating:
Class 1 - Group B (H2TS Only), C and D;
and Class II - Groups E, F and G
N/A
ATEX II 2 G/D EEx d IIC T6, IP6X, T80°C
ATEX, EEx ia IIC T6 II1 G and EEx d
IIB+H2 T6 II 2 G, CSA, FM EExiaIICT4,
EExdIIB+H2T4, Div.1, Cl.1-3,
Grp.B-G
II 2 G ATEX EEx ib II CT6,T5,T4
Communication
N/A
N/A
N/A
N/A
N/A
N/A
Limit Switches
Up to 4 SPDT UL/CSA rating (L23)
N/A
2 x mechanical, proximity, Namur
2 x mechanical, proximity, Namur
2 x mechanical, Namur
N/A
Position Transmitter
Analog 4 to 20mA or 0 to 20mA
N/A
Analog 4 to 20mA or 0 to 20mA
Analog 4 to 20mA
Analog 4 to 20mA
N/A
Mounting
• Direct Rotary mounting
• Side mounting on the valve
• On casing actuator
• On panel
• Direct rotary mounting
• Side mounting on the valve
• VDI/VDE 3845
• IEC 534-6
• VDI/VDE 3845
• IEC 534-6
• VDI/VDE 3845
• IEC 534-6
Particularity
• We can combine up to 4 SPDT or 2 SPDT
with Analog transmitter together
• The flow booster is a one-to-one pressure
regulator that amplifies flow to increase
the stroking speed of actuators
• Temperature range in option for
position transmitter -55 to +155°C
• Modular
• Visual position indicator "Dome"
• Direct mount to P5/EP5
• Modular
• Visual position indicator
• Modular
• Input 4 to 20 mA
• Output 0 to 100% of air supply
24
25
The Flowserve Flow Control global structure is aligned
into three distinct organisations to meet the current and
future needs of the market. In addition to control valves,
the other two groups, Process and Power, are described
on this page.
Process
An outstanding portfolio of value engineered isolation valves
and associated actuation products from some of the leading
manufacturers in the world, including:
•
•
•
•
•
•
•
•
•
Argus
Atomac
Automax
Durco
McCanna
Norbro
Nordstrom
Serck Audco Valves
Worcester Controls
All of these have established themselves as suppliers of highperformance, innovative and dependable products. Between
them, Flowserve is able to meet every process requirement
with a range of soft-seated, metal-seated or lined ball valves,
general purpose or high performance butterfly valves, gate,
globe and check valves, lined plug valves, pressure balanced
plug valves for oil and gas applications and even polyethylene
valves.
With Norbro and Automax, high performance pneumatic
actuators (rack and pinion or Scotch yoke), electric actuators
and valve automation accessories are available as either
modular components or as part of an integrated quarter-turn
valve automation package.
Flowserve process valves and actuators are used in a wide
range of industries including oil and gas, petrochemical and
refining, chemical, fine chemical / pharmaceutical, pulp and
paper, food and beverage etc.
Whatever the application, Flowserve process products are
designed to minimise downtime and increase operational
efficiency.
26
Power
Flowserve Flow Control's Power group provides
a wide range of engineered solutions to this vital
industry, covering sectors as diverse as nuclear,
fossil fuel, district heating, steam equipment and
systems for boilerhouses.
Anchor Darling and Edward Valves are specialist
suppliers to all parts of the power generation
industry, with nuclear grade gate, globe and check
valves capable of handling high pressure/high
temperature, erosive slurries, cryogenic, corrosive
and other severe services. Available in a wide range
of materials and linings, these valves can be
equipped with manual, electric or pneumatic
operators. They are designed for smooth operation,
uniform wear, wide parts interchangeability and
in-line maintenance.
Limitorque's range of three-phase electric actuators
helps to make valve control easier, whether the need
is for torque as high as half a million foot-pounds of
thrust or for a sophisticated automated network to
control hundreds of valves.
As the world's largest manufacturer of welded ball
valves, Naval is a key supplier to the world's district
heating and cooling industry. Based in Finland, Naval
manufactures ball and butterfly valves in stainless
and carbon steel in sizes from 10-600mm.
Through Gestra, its specialist steam systems and
equipment supplier, Flowserve provides tailor-made
intelligent system solutions and customised products
for steam and condensate services.
Gestra's product range includes steam traps, check
(non-return) valves, control valves, boilerhouse
equipment with SpectorBus technology, vessels and
heat recovery systems, providing energy savings,
enhanced operational reliability and increased plant
transparency.
Flowserve Flow Control's global structure also includes
a Service and Repair Group to support the three new
Flow Control organisations as described here.
Service and Repair
High Quality Service across Europe
Valve Repair & Related Services
With a number of valve repair shops, and with
experienced / well-equipped service teams, Flowserve
is one of the largest providers of valve related
services in Europe. Our services are not limited to
solely Flowserve Flow Control products, but cover
all brands and product type including pressure
regulators, level control, and safety relief valves and
all the other valves and automation products you
need to overhaul.
Workshop Services
• Reconditioning of safety relief valves.
• Reconditioning of control valves.
• Reconditioning of manual valves.
Field Services
• Installation and removal of valves.
• On-site repair of welded valves.
Other Services
•
•
•
•
•
•
Organising complete shutdown.
Start-up commissioning.
Advanced diagnostic system.
Asset and stock management.
Field machining.
Hot-tapping and line stopping (up to 60").
27
Regional Headquarters
Flowserve America
1350 N. Mt. Springs Prkwy.
Springville, UT 84663 USA
Telephone: +1 801 489 8611
Fax: +1 801 489 3719
Flowserve Asia
12 Tuas Avenue 20, 638824
Republic of Singapore
Telephone: +65 862 3332
Fax: +65 862 4940
Flowserve EMA
Burrell Road, Haywards Heath,
West Sussex, England RH16 1TL
Telephone: +44 (0) 1444 314 400
Fax: +44 (0) 1444 314 401
Main Sales Offices
(Europe, Middle East, Africa)
Flowserve Austria
Telephone: +43 (0) 42 4241 1810
Fax: +43 (0) 42 4241 181 50/51
Flowserve Benelux
Telephone: +31 (0) 181 330 044
Fax: +31 (0) 1811 330 040
FCD FCEBR1001-01 Printed in UK (Replaces PB17 Rev 04/03)
To find your local Flowserve representative:
For more information about Flowserve Corporation,
visit www.flowserve.com
Flowserve France
Telephone: +33 (0) 473 804 266
Fax: +33 (0) 473 801 424
Flowserve Germany
Telephone: +49 (0) 201 891 95
Fax: +49 (0) 201 891 9662
Flowserve Italy
Telephone: +39 026 632 51
Fax: +39 026 151 863
Flowserve Middle East
Telephone: +971 268 106 61
Fax: +971 268 116 72
Due to continuous development of our product range, we reserve the right to alter the dimensions and information contained in this leaflet as required.
Information given in this leaflet is made in good faith and based upon specific testing but does not, however, constitute a guarantee.
Flowserve Portugal
Telephone: +351 226 198 770
Fax: +351 226 107 575
Flowserve Russia
Telephone: +7 095 788 7346
Fax: +7 095 788 7348
Flowserve Scandinavia
Telephone: +46 133 161 00
Fax: +46 131 360 54
Flowserve South Africa
Telephone: +27 119 237 300
Fax: +27 119 746 420
Flowserve Spain
Telephone: +34 915 152 032
Fax: +34 915 152 036
Flowserve Switzerland
Telephone: +41 (0) 329 259 700
Fax: +41 (0) 329 265 422
Flowserve UK
Telephone: +44 (0) 1444 314 400
Fax: +44 (0) 1444 314 401
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement