Serial Device Servers and IP Gateways

Serial Device Servers and IP Gateways
Serial Device Servers
and IP Gateways
11
11-2
Selection Guide
Cellular IP Gateways
Cellular IP Gateways Introduction
11-5
EKI-1321
EKI-1322
11-7
1-port RS-232/422/485 to GPRS IP Gateway
2-port RS-232/422/485 to GPRS IP Gateway
Wireless Serial Device Servers
EKI-1361
EKI-1362
1-port RS-232/422/485 to 802.11b/g/n WLAN Serial Device Server
2-port RS-232/422/485 to 802.11b/g/n WLAN Serial Device Server
11-8
Dual Ethernet Serial Device Servers
EKI-1521
EKI-1522
EKI-1524
1-port RS-232/422/485 Serial Device Server
2-port RS-232/422/485 Serial Device Server
4-port RS-232/422/485 Serial Device Server
11-9
EKI-1528
EKI-1526
8-port RS-232/422/485 Serial Device Server
16-port RS-232/422/485 Serial Device Server
11-10
EKI-1221
EKI-1222
EKI-1224
1-port Modbus Gateway
2-port Modbus Gateway
4-port Modbus Gateway
11-11
EKI-1221D
EKI-1222D
1-port Modbus Gateway with Integrated Ethernet Cascading
2-port Modbus Gateway with Integrated Ethernet Cascading
11-12
Modbus Gateways
To view all of Advantech’s Serial Device Servers, please visit www.advantech.com/products.
Selection Guide
Cellular IP Gateways (iGateways)
NEW
NEW
Model Name
EKI-1321
EKI-1322
Product Description
1-port RS-232/422/485 to
GPRS IP Gateway
2-port RS-232/422/485 to
GPRS IP Gateway
Cellular Interface
GSM/GPRS
Quad-band Options
850/900/1800/1900 MHz
Antenna Connector Type
SMA female
No. of Antenna connector
1
No. of Serial Ports
1
2
No. of Ethernet Ports
1
Ethernet Interface
10/100 Mbps
Baud Rate
50 bps ~ 921.6 kbps
Operation Mode /
Software Feature
Virtual COM, Reverse Virtual COM, TCP Server, TCP Client, UDP, SMS Tunnel Mode
Utility
Windows 2000/XP/Vista/7, Web Console
Page
11-7
Wireless Serial Device Servers
NEW
NEW
Model Name
EKI-1361
EKI-1362
EKI-1351
EKI-1352
Product Description
1-port
RS-232/422/485 to 802.11b/g/n
WLAN Serial Device Server
2-port
RS-232/422/485 to 802.11b/g/n
WLAN Serial Device Server
1-port
RS-232/422/485 to 802.11b/g
WLAN Serial Device Server
2-port
RS-232/422/485 to 802.11b/g
WLAN Serial Device Server
No. of Ethernet Port
1
1
-
-
No. of Serial Port
1
2
1
2
Ethernet Interface
10/100/1000 Mbps
-
WLAN
802.11b/g/n
802.11b/g
Antenna Connector
Type
No. of Antenna
connector
RP-SMA (female)
2
1
Serial Type
Connector
11-2
Ethernet
RS-232/422/485
RJ45
Serial
DB9 Male
Baud Rate
50 bps ~ 921.6 kbps, any baud rate setting
Operating Mode
Virtual COM, TCP Server, TCP Client, UDP, Peer to Peer, AT Command
Driver
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
Certification
CE, FCC, KCC, TELEC
Class I Division 2 Groups ABCD T4, UL/cUL 60950-1, FCC, CE
Page
11-8
online
Serial Device Servers and IP Gateways
Selection Guide
Dual Ethernet Serial Device Servers
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Model Name
EKI-1521
EKI-1522
EKI-1524
EKI-1528
EKI-1526
Product Description
1-port
RS-232/422/485 Serial
Device Server
2-port
RS-232/422/485 Serial
Device Server
8-port
RS-232/422/485 Serial
Device Server
16-port
RS-232/422/485 Serial
Device Server
1
2
4-port
RS-232/422/485 Serial
Device Server
2
4
10/100 Mbps
RS-232/422/485
RJ45
8
16
No. of Ethernet Port
No. of Serial Port
Ethernet Interface
Serial Type
Ethernet
Connector
Serial
Baud Rate
Operating Mode
Driver
Certification
Page
RJ45
50 bps ~ 921.6 kbps, any baud rate setting
Virtual COM, TCP Server, TCP Client, UDP, Peer to Peer, AT Command, and RFC2217 modes
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
Class I Division 2 Groups ABCD T4, UL/cUL 60950-1, FCC, CE
FCC, CE
11-9
11-10
DB9 Male
Automation Software
Operator Panels
Automation Panel PCs
Industrial Panel
Computers & Panel PC
Single Ethernet Serial Device Server
Industrial Monitors
Industrial Wireless
Solutions
Model Name
ADAM-4571
ADAM-4571L
ADAM-4570
ADAM-4570L
Product Description
1-port
RS-232/422/485 Serial Device
Server
1-port RS-232
Serial Device Server
2-port
RS-232/422/485 Serial Device
Server
2-port RS-232
Serial Device Server
No. of Ethernet Port
No. of Serial Port
Ethernet Interface
Serial Type
Ethernet
Connector
Serial
Baud Rate
Operating Mode
Driver
Certification
Page
1
1
2
10/100 Mbps
RS-232/422/485
RS-232
RS-232/422/485
RS-232
RJ45
DB9 Male
RJ48
50 bps ~ 921.6 kbps, any baud rate setting
Virtual COM, TCP Server, TCP Client, UDP, Peer to Peer, and AT Command modes
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
FCC, CE
online
Industrial Ethernet
Solutions
Serial Device Servers
and IP Gateways
Serial Communication
Cards
Embedded Automation
Computers
PACs
Accessories
Compact PCI Systems
M2M I/O Modules
Model Name
Length
Connector
Type
Qty
Communication
Interfaces
Connector
Type
Qty
Where Used
Page
OPT1-DB9
DB9 Female
OPT1A
1m
OPT1D
30 cm
OPT1I
1m
OPT1J
30 cm
RJ48
RJ45
1
1
1
Terminal
DB9 Male
DB9 Male
1
EKI-1000 Series,
ADAM-4570 Series
online
1
1
ADAM-4570, ADAM-4570L
EKI-1526, EKI-1528
online
online
RS-485 I/O Modules
Ethernet I/O Modules
Online Download www.advantech.com/products
11-3
Selection Guide
Modbus Gateways
Model Name
EKI-1221
Product Description
EKI-1222
EKI-1224
EKI-1221D
EKI-1222D
ADAM-4572
1-port Modbus
Gateway with
Integrated
Cascading
Ethernet
2-port Modbus
Gateway with
Integrated
Cascading
Ethernet
1-port Modbus
Gateway
1
2
1
1-port Modbus
Gateway
2-port Modbus
Gateway
4-port Modbus
Gateway
1
2
4
No. of Ethernet Ports
No. of Serial Ports
2
1
Ethernet Interface
10/100 Mbps
Serial Type
RS-232/422/485, software selectable
Connector Type
DB9 Male
Ethernet Feature
Screw Terminal
Dual Ethernet Redundancy
Configuation
Daisy-Chain Connectivity
-
Windows Configuration Utility, Web-Browser Console
Operating Mode
Windows Utility
Modbus RTU Master, Modbus RTU Slave, Modbus ASCII Master, and Modbus ASCII Slave modes
Baud Rate
50 bps ~ 921.6 kbps
Certification
Class I Division 2 Groups ABCD T4, FCC, CE
Page
11-11
FCC, CE
11-12
online
Serial to USB Converters
Model Name
ADAM-4561
Product Description
1-port Isolated USB to
RS-232/422/485 Converter
Interface
USB-4604B
USB-4604BM
1-port Isolated USB to
RS-232 Converter
4-port RS-232 to USB
Converter with ESD Surge
Protection
4-port RS-232/422/485 to
USB Converter with ESD
Surge Protection
USB 1.1
Serial Port
USB 1.1/2.0
1
Baud Rate
Serial Type
4
50 ~ 115.2 kbps
75 ~ 115.2 kbps
RS-232/422/485
RS-232
USB
Connector
Protection
50 ~ 921.6 kbps
RS-232
RS-232/422/485
Type B
Serial
Screw Terminal
Isolation
3,000 VDC (RS-232/422/485)
Surge
Driver
DB9
2,500 VDC
-
-
2,500 VDC
Windows 2000/XP
Page
11-4
ADAM-4562
Windows 2000/XP/Vista/7, CE5.0/6.0, Linux
online
Serial Device Servers and IP Gateways
Cellular IP Gateways
Introduction
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Automation Software
Operator Panels
Automation Panel PCs
Industrial Panel
Computers & Panel PC
IoT (Internet of Things) architecture is divided into four layers: sensor, network, service and application. As the internet greatly increased people-to-people interactions, the IoT greatly
increases people-to-object and object-to-object interactions. The network layer represents access to all object data via wireless networks and the internet coverage in a real-time data
stream. The Intelligent Cellular IP Gateways in the network layer of IoT architecture link all the objects, devices and transmit sensor information through reliable wired and wireless
communication (3G, GPRS, Wi-Fi, Zigbee) networks. The goal and objective is to build up "ubiquitous networks connected to all objects".
Key Features
Application
pp
ƒ Compact and simple
ƒ Extremely versatile gateway features
Industrial Monitors
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
ƒ Dual SIM slots for connection redundancy
ƒ Extra SD slot for data buffering and auto recovery
ƒ Provides NAT with VPN
Serial Device Servers
and IP Gateways
ƒ Universal quad-band GSM/GPRS 850/900/1800/1900 MHz
Serial Communication
Cards
Embedded Automation
Computers
PACs
Compact PCI Systems
M2M I/O Modules
RS-485 I/O Modules
Ethernet I/O Modules
Online Download www.advantech.com/products
11-5
Cellular IP Gateways Introduction
Device Server Technologies
RVCOM
OpenVPN Support
iGateway series supports Advantech patented RVCOM function that allows user use the
virtual com port as usual, even the device gets a private IP address.
iGateway series supports standard OpenVPN protocol that provide trustable data
communication. User can setup private OpenVPN server easily without extra software
license fee.
DDNS Support
IPv6 and IPv4 Dual Stack Support
DDNS support helps user to locate the exactly current IP address of device easily. Device
will automatically update current IP address to DDNS server. When use DDNS with VCOM
or RVCOM, user doesn’t need to do the lookup manually after setup. The connection will
handle by VCOM or RVCOM automatically.
IPv6 will get popular eventually. iGateway series supports IPv6 and IPv4 dual protocol
stack that helps user to overcome the impact of Ethernet architecture transition smoothly
and easily.
iGateway Application for Solar Power
Advantech's GPRS/3G Serial Device Servers are a perfect fit for wireless data transmission systems due to their great performance, reliability and ruggedness. The GPRS/3G Serial
Device Servers collect data from solar panels & inverters, pyranometers, and relative sensors. This information is transmitted through cellular data network to the telecom control
center. Service providers and users are able to easily access real-time information anywhere, anytime. The GPRS/3G Serial Device Servers provide dual SIM slots for telecom carrier
redundancy and one SD slot for serial data buffering.
11-6
Serial Device Servers and IP Gateways
EKI-1321
EKI-1322
1-port RS-232/422/485 to GPRS
IP Gateway
2-port RS-232/422/485 to GPRS
IP Gateway
Features
NEW
ƒ Universal quad-band GSM/GPRS 850/900/1800/1900 MHz
ƒ Dual SIM for telecom redundancy
ƒ Support SDHC SD Card for Data Buffering
ƒ Connect Ethernet and Serial Devices over VPN
ƒ Various operation modes: COM port redirector, RVCOM, TCP, UDP, SMS
tunnel, and pair connection
ƒ Any baud rate setting for easy configuration
ƒ Built-in 15 KV ESD protection for all serial signals
ƒ 1.5 KV isolation protection (EKI-1321)
ƒ 2 digital inputs (EKI-1321)
ƒ Multiple configuration methods: Windows utility, Telnet, and Web console
EKI-1321
ƒ Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008,
Windows CE 5.0, and Linux
EKI-1322
COMPLIANT
2002/95/EC
Introduction
EKI-1321 and EKI-1322 cellular gateways can transparently bring RS-232/422/485 or Ethernet devices to a cellular network. They allow nearly any device with serial or Ethernet ports
to connect and share a cellular network with easy and simple configuration. EKI-1321 and EKI-1322 GPRS IP Gateway's are compact, and can be DIN-rail or wall mounted and with
both front panel and side panel LED displays for easy identification. They come with dual DC power input from 12 to 48 VDC and have 2 KV EFT/Surge protection to prevent damage
from various type of power resources. The serial ports are also protected by 15 KV ESD line protection to keep your system safe from unexpected electrical discharges. Both models
support dual SIM slots to support GPRS signal redundancy to switch to an available channel automatically while the existing one is disconnected, and SD card slot for data buffering
to prevent loss of serial data while the communication is interrupted.
Specifications
ƒ LED Indicators
ƒ Reboot Trigger
10/100 Mbps, auto MDI/MDIX
RJ45
1.5 KV built-in magnetic isolation protection
ƒ Utility Software
ƒ Operating Modes
GSM/GPRS
Quad-band 850/900 and 1800/1900 MHz
Class 10
Class B
CS1 ~ CS4
1 W for GSM 1800/1900, 2 W for EGSM 850/900
2
3V
ƒ Configuration
ƒ Protocols
ƒ Router/Firewall
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Port Connector
Data Bits
Stop Bits
Parity
Baud Rates
Serial Signals
ƒ Protection
RS-232/422/485, software selectable
EKI-1321: 1, 2 KV isolation protection
EKI-1322: 2
DB9 male
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
75 bps to 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
Relay Output
ƒ Channel
ƒ Contact Rating
ƒ Relay off Time(Typ.)
ƒ Relay on Time(Typ.)
1
0.5 A @ 120 VAC
0.25 A @ 240 VAC; 2 A @ 30 VDC
4 ms
3 ms
ƒ
ƒ
ƒ
ƒ
Dimensions (W x H x D)
Enclosure
Mounting
Weight
2
Logic level 0: 1 V Maximum
Logic level 1: 3 ~ 30 V
Automation Software
Operator Panels
Power Input
Power Connector
Power Consumption
Power EFT/Surge Prot.
27 x 120 x 85 mm (1.06" x 4.72" x 3.35")
Metal with solid mounting hardware
DIN-rail, Wall
0.49 Kg
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1321: 8W, EKI-1322: 8.5W
2 KV
Environment
ƒ Operating Temperature
ƒ Storage Temperature
ƒ Operating Humidity
Industrial Monitors
Industrial Ethernet
Solutions
Serial Device Servers
and IP Gateways
Serial Communication
Cards
PACs
Compact PCI Systems
M2M I/O Modules
-30 ~ 65°C (-22 ~ 149°F)
-40 ~ 75°C (-40 ~ 167°F)
5 ~ 95% RH
RS-485 I/O Modules
Regulatory Approvals
ƒ EMC
Industrial Panel
Computers & Panel PC
Embedded Automation
Computers
Power Requirements
ƒ
ƒ
ƒ
ƒ
ƒ RF
Digital Input (EKI-1321)
ƒ Channel
ƒ Input Level
32-bit/64-bit Windows 2000/XP/Vista/7,
Windows Server 2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
Virtual COM, Reverse Virtual COM, TCP/UDP server mode,
TCP/UDP client mode, Pair connection mode (Serial Tunnel),
RFC2217, SMS Tunnel, IP Gateway w/ VPN
Windows utility, Telnet console, Web Browser
ICMP, TCP/IP, UDP, DHCP Client, Telnet, DNS, SNMP, HTTP,
HTTPS, SMTP, SNTP, ARP, SSL
NAT, port forwarding
Mechanics
Serial Communications
ƒ Port Type
ƒ No. of Ports
System: Power, System Status
GPRS: Quality, GPRS ready; Serial: Tx, Rx
Built-in WDT (watchdog timer)
Software
ƒ Driver Support
Cellular Interface
Standards
Band Option
GPRS Multi-Slot
GPRS Terminal Device
GPRS Coding Schemes
Tx Power
No. of SIM
SIM Control
Power & Energy
Automation
Industrial Wireless
Solutions
General
LAN Interface
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Motion Control
Automation Panel PCs
RoHS
ƒ Ethernet
ƒ Connector
ƒ Protection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
CE: EN55022/EN55024, Class A
FCC: FCC part 15 subpart B, Class A
FCC Part22H/Part24E, EN301 489-1, EN301 489-7, EN301
511
Ethernet I/O Modules
Ordering Information
ƒ EKI-1321
ƒ EKI-1322
ƒ OPT1-DB9
1-port GPRS IP Gateway
2-port GPRS IP Gateway
D-Sub 9 to Terminal Converter
Online Download www.advantech.com/products
11-7
EKI-1361
EKI-1362
1-port RS-232/422/485 to 802.11b/g/n WLAN
Serial Device Server
2-port RS-232/422/485 to 802.11b/g/n WLAN
Serial Device Server
Features
NEW
ƒ Link any serial device to an IEEE 802.11b/g/n network
ƒ Support 802.11n MIMO 2T2R
ƒ WLAN transmision rate up to 300 Mbps
ƒ Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2Enterprise
ƒ Provides COM port redirection, TCP, UDP, and pair connection modes
ƒ Supports up to 921.6 kbps, and any baud rate setting
ƒ Provides Web-based configuration and Windows utility
ƒ Allows a max. of 5 hosts to access one serial port
ƒ Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008,
Windows CE 5.0, and Linux
ƒ Allows a max. of 4 hosts to be accessed as TCP client mode
EKI-1361
EKI-1362
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1361 and EKI-1362 wireless serial device servers bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN
network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that
cannot connect to a network.
With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific
operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves
a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the
EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.
Specifications
Ethernet Communications
Mechanics
ƒ Port Type
ƒ No. of Ports
ƒ Speed
ƒ
ƒ
ƒ
ƒ
RJ45
1
10/100/1000 Mbps
Wireless LAN Communications
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Compatibility
Speed
Network Mode
Antenna Connector
No. of Antenna
Free Space Range
Wireless Security
IEEE 802.11b/g/n
Up to 300Mbps
Infrastructure, Ad-hoc
Reverse SMA
2 (support 2T2R)
Open space 100 m
WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Port Connector
Data Bits
Stop Bits
Parity
Baud Rate
Serial Signals
ƒ Protection
RS-232/422/485, software selectable
EKI-1361: 1
EKI-1362: 2
DB9 male
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
Software
ƒ Driver Support
ƒ Utility Software
ƒ Operation Modes
ƒ Configuration
ƒ Protocols
11-8
Plastic and metal shell with solid mounting kits
DIN-rail, Wall
28.5 x 120 x 85.3 mm (1.12" x 4.72" x 3.36")
0.5 Kg
General
ƒ LED Indicators
ƒ Reboot Trigger
System: Power, System Status
WLAN: Quality, Link/Active
LAN: Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Power Requirements
Serial Communications
ƒ Port Type
ƒ No. of Ports
Enclosure
Mounting
Dimensions (W x H x D)
Weight
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server
2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection without AP (peer to peer) mode
Windows utility, Telnet console, Web Browser
ICMP, TCP/IP, UDP, DHCP Client, Telnet, DNS, SNMP,
HTTP, SMTP, SNTP, ARP
Serial Device Servers and IP Gateways
ƒ Power Input
ƒ Power Connector
ƒ Power Consumption
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1361: 8W
EKI-1362: 9W
Environment
ƒ Operating Temperature
ƒ Storage Temperature
ƒ Operating Humidity
-30 ~ 65°C (-22 ~ 149°F)
-40 ~ 80°C (-40 ~ 176°F)
5 ~ 95% RH
Regulatory Approvals
ƒ EMC
CE, FCC Part 15 Subpart B (Class B)
Ordering Information
ƒ EKI-1361
ƒ EKI-1362
ƒ OPT1-DB9
1-port 802.11b/g/n WLAN Serial Device Server
2-port 802.11b/g/n WLAN Serial Device Server
D-Sub9 to Terminal Converter
EKI-1521
EKI-1522
EKI-1524
1-port RS-232/422/485 Serial Device Server
2-port RS-232/422/485 Serial Device Server
4-port RS-232/422/485 Serial Device Server
Features
ƒ Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒ Provides COM port redirection (Virtual COM), TCP and UDP operation modes
ƒ Supports up to 921.6 kbps, and any baud rate setting
ƒ Allows a max. of 5 hosts to access one serial port
ƒ Allows a max. of 16 hosts to be accessed as TCP client mode
ƒ Built-in 15 KV ESD protection for all serial signals
ƒ Provides rich configuration methods including Windows utility, Telnet console,
and Web Browser
ƒ Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008,
Windows CE 5.0, and Linux
ƒ Automatic RS-485 data flow control
ƒ Class I, Division 2 certification
EKI-1521
EKI-1522
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
EKI-1524
Motion Control
Power & Energy
Automation
Automation Software
Operator Panels
Automation Panel PCs
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability.
EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet
LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection
(Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522
and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices
peer-to-peer, without any intermediate host PCs and software programming.
Specifications
Mechanics
ƒ Dimensions (W x H x D) EKI-1521/1522: 37 x 140 x 95 mm (1.46" x 5.51" x 3.74")
EKI-1524: 55 x 140 x 95 mm (2.17" x 5.51" x 3.74")
ƒ Enclosure
Metal with solid mounting hardware
ƒ Mounting
DIN-rail, Wall
ƒ Weight
EKI-1521: 0.592 Kg
EKI-1522: 0.6 Kg
EKI-1524: 0.668 Kg
Ethernet Communications
ƒ
ƒ
ƒ
ƒ
ƒ
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
General
ƒ LED Indicators
Serial Communications
ƒ Port Type
ƒ No. of Ports
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Port Connector
Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒ Protection
RS-232/422/485, software selectable
EKI-1521: 1
EKI-1522: 2
EKI-1524: 4
DB9 male
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
Built-in 15 KV ESD for all signals
Software
ƒ Driver Support
ƒ Utility Software
ƒ Operation Modes
ƒ Configuration
ƒ Protocols
ƒ Management
32-bit/64-bit Windows 2000/XP/Vista/7, Windows
Server 2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection (peer to peer) mode
Windows utility, Telnet console, Web Browser
ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet,
SNMP, HTTP, DNS, SMTP, ARP, NTP
SNMP MIB-II
ƒ Reboot Trigger
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1521: 2 W
EKI-1522: 2.5 W
EKI-1524: 4 W
Environment
ƒ Operating Temperature -10 ~ 60°C (14 ~ 140°F)
ƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
ƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
ƒ EMC
ƒ Safety
ƒ MTBF
ƒ Hazardous Location
EKI-1521
EKI-1522
EKI-1524
OPT1-DB9
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Serial Device Servers
and IP Gateways
Serial Communication
Cards
PACs
Compact PCI Systems
M2M I/O Modules
CE, FCC Part 15 Subpart B (Class A)
UL/cUL 60950-1
EKI-1521: 1,102,913 hours
EKI-1522: 1,000,154 hours
EKI-1524: 862,230 hours
Class I, Division 2
Ordering Information
ƒ
ƒ
ƒ
ƒ
Industrial Monitors
Embedded Automation
Computers
Power Requirements
ƒ Power Input
ƒ Power Connector
ƒ Power Consumption
Industrial Panel
Computers & Panel PC
RS-485 I/O Modules
Ethernet I/O Modules
1-port RS-232/422/485 Serial Device Server
2-port RS-232/422/485 Serial Device Server
4-port RS-232/422/485 Serial Device Server
D-Sub9 to Terminal Converter
Online Download www.advantech.com/products
11-9
EKI-1528
EKI-1526
8-port RS-232/422/485 Serial Device Server
16-port RS-232/422/485 Serial Device Server
Features
ƒ 8 or 16-port RS-232/422/485 serial communication
ƒ Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒ Supports up to 921.6 kbps, and any baud rate setting
ƒ Provides COM port redirection (Virtual COM), TCP and UDP operation modes
ƒ Provides rich configuration methods: Windows utility, Telnet console, Web
Browser, and serial console
ƒ Built-in 15 KV ESD protection for all serial signals
ƒ SNMP MIB-II for network management
ƒ Built-in buzzer for easy location
ƒ Standard 1U rackmount size
ƒ Rear wiring
ƒ Automatic RS-485 data flow control
EKI-1528
EKI-1526
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1528 and EKI-1526 industrial-grade network-based serial device servers connect up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly
to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network
reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't
connect to an Ethernet network. The EKI-1528 and EKI-1526 offer rich ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make
it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
ƒ Mounting
ƒ Weight
Specifications
Ethernet Communications
ƒ
ƒ
ƒ
ƒ
ƒ
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps, auto MDI/MDIX
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
Serial Communications
ƒ Port Type
ƒ No. of Ports
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Port Connector
Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
ƒ Serial Signals
ƒ Protection
RS-232/422/485, software selectable
EKI-1528: 8
EKI-1526: 16
8-pin RJ45
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
16 ports up to 230.4 kbps simultaneously
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
Software
ƒ Driver Support
ƒ Utility Software
ƒ Operation Modes
ƒ Configuration
ƒ Protocols
ƒ Management
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server
2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection (peer to peer) mode
RFC2217 mode
Windows utility, Telnet console, Web Browser, serial console
ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet, SNMP,
HTTP, DNS, SMTP, ARP, HTTPS, SSL, SSH, NTP
SNMP MIB-II
Mechanics
ƒ Dimensions (W x H x D)
ƒ Enclosure
11-10
440 x 44 x 220 mm (17.32" x 1.73" x 8.66")
SECC chassis
Serial Device Servers and IP Gateways
Rack
EKI-1528: 2.53 Kg
EKI-1526: 2.58 Kg
General
ƒ LED Indicators
ƒ Alert Tools
ƒ Reboot Trigger
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in buzzer and RTC (real time clock)
Built-in WDT and push button for hardware reboot
Power Requirements
ƒ Power Input
ƒ Power Consumption
100 ~ 240 VAC, 47 ~ 63 Hz
EKI-1528: 8 W
EKI-1526: 10 W
Environment
ƒ Operating Temperature
ƒ Storage Temperature
ƒ Operating Humidity
-10 ~ 60°C (14 ~ 140°F)
-20 ~ 80°C (-4 ~ 176°F)
5 ~ 95% RH
Regulatory Approvals
ƒ EMC
ƒ MTBF
CE, FCC Part 15 Subpart B (Class A)
EKI-1528: 249,812 hours
EKI-1526: 227,175 hours
Ordering Information
ƒ EKI-1528
ƒ EKI-1526
8-port RS-232/422/485 Serial Device Server
16-port RS-232/422/485 Serial Device Server
*All items include 1pc OPT1J
Accessories
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
OPT1I
OPT1J
1702002600
1702002605
1702031801
1702031836
1 m RJ45 to DB9 Male Cable
30 cm RJ45 to DB9 Male Cable
Power Cable US Plug 1.8 m
Power Cable EU Plug 1.8 m
Power Cable UK Plug 1.8 m
Power Cable China/Australia Plug 1.8 m
EKI-1221
EKI-1222
EKI-1224
1-port Modbus Gateway
2-port Modbus Gateway
4-port Modbus Gateway
Features
ƒ Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒ Integration of Modbus TCP and Modbus RTU/ASCII networks
ƒ Supports up to 921.6 kbps, and any baud rate setting
ƒ Supports up to 16 connections and 32 requests simultaneously
ƒ Easy-managing Advantech Serial Device Server Configuration Utility for
Windows 2000/XP/Vista/7
ƒ Auto searching slave ID over configuration utility
ƒ Software selectable RS-232/422/485 communication
ƒ Mounts on DIN-rail and Wall mount
ƒ Built-in 15 KV ESD protection for all serial signals
ƒ Automatic RS-485 data flow control
EKI-1221
EKI-1222
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
EKI-1224
Motion Control
Power & Energy
Automation
Automation Software
Operator Panels
Automation Panel PCs
RoHS
COMPLIANT
2002/95/EC
Introduction
The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based
devices. The EKI-1221/1222/1224 feature two independent Ethernet ports and MAC addresses to provide a redundant networking mechanism to guarantee Ethernet networking
reliability. They provide a simple and cost-effective way to bring the advantage of remote management and data accessibility to thousand of devices that can not connect to a network.
The EKI-1221/1222/1224 provide a feature that can allow users to select master or slave operation mode for each serial port. They not only allow an Ethernet master to control serial
slaves, but also allow serial masters to control Ethernet slaves.
Specifications
ƒ LED Indicators
ƒ
ƒ
ƒ
ƒ
ƒ
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
ƒ Reboot Trigger
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Port Connector
Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒ Protection
RS-232/422/485, software selectable
EKI-1221: 1
EKI-1222: 2
EKI-1224: 4
DB9 male
7, 8
1, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
Software
ƒ OS Support
ƒ Utility Software
ƒ Operation Modes
ƒ Configuration
ƒ Protocols
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Mechanics
Serial Communications
ƒ Port Type
ƒ No. of Ports
32-bit/64-bit Windows 2000/XP/Vista/7 and Windows
Server 2003/2008
Advantech Serial Device Server Configuration Utility
Modbus RTU Master/Slave mode
Modbus ASCII Master/Slave mode
Windows Utility, Web Browser
Modbus RTU, Modbus TCP, Modbus ASCII
ƒ Dimensions (W x H x D) EKI-1221/1222: 37 x 140 x 95 mm (1.46" x 5.51" x 3.74")
EKI-1224: 55 x 140 x 95 mm (2.17" x 5.51" x 3.74")
ƒ Enclosure
Metal with solid mounting hardware
ƒ Mounting
DIN-rail, Wall
ƒ Weight
EKI-1221: 0.592 Kg
EKI-1222: 0.6 Kg
EKI-1224: 0.668 Kg
Power Requirements
ƒ Power Input
ƒ Power Connector
ƒ Power Consumption
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1221: 2 W
EKI-1222: 2.5 W
EKI-1224: 4 W
ƒ Operating Temperature -10 ~ 60°C (14 ~ 140°F)
ƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
ƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
CE, FCC Part 15 Subpart B (Class A)
UL/cUL 60950-1
Class I, Division 2
Ordering Information
ƒ
ƒ
ƒ
ƒ
EKI-1221
EKI-1222
EKI-1224
OPT1-DB9
Industrial Ethernet
Solutions
Serial Device Servers
and IP Gateways
Serial Communication
Cards
Embedded Automation
Computers
PACs
Compact PCI Systems
Environment
ƒ EMC
ƒ Safety
ƒ Hazardous Location
Industrial Monitors
Industrial Wireless
Solutions
General
Ethernet Communications
Industrial Panel
Computers & Panel PC
M2M I/O Modules
RS-485 I/O Modules
Ethernet I/O Modules
1-port Modbus Gateway
2-port Modbus Gateway
4-port Modbus Gateway
D-Sub9 to Terminal Converter
Online Download www.advantech.com/products
11-11
EKI-1221D
EKI-1222D
1-port Modbus Gateway with
Integrated Ethernet Cascading
2-port Modbus Gateway with
Integrated Ethernet Cascading
Features
ƒ Provides 2 x 10/100 Mbps Ethernet ports for Daisy Chian connectivity
ƒ Integration of Modbus TCP and Modbus RTU/ASCII networks
ƒ Supports Ethernet auto-bypass function
ƒ Master mode supports 32 TCP slaves at the same time
ƒ Slave mode supports up to 16 TCP masters
ƒ Supports mapping Modbus slave ID option
ƒ Auto searching Modbus slave ID over configuration utility
ƒ Mounts on DIN-rail and Wall mount
ƒ Class I, Division 2 certification
EKI-1221D
EKI-1222D
RoHS
COMPLIANT
2002/95/EC
Introduction
The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based
devices. The EKI-1221D/1222D feature two Ethernet ports with one IP address for easier network wiring. One port can be used to connect to the network, and the other port can be used
to connect to another Ethernet device or another EKI-1221D/1222D. They provide a simple and cost-effective way to bring the advantage of remote management and data accessibility
to thousand of devices that can not connect to a network. The EKI-1221D/1222D provide a feature that can allow users to select master or slave operation mode for each serial port.
They not only allow an Ethernet master to control serial slaves, but also allow serial masters to control Ethernet slaves.
Specifications
Ethernet Communications
General
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ LED Indicators
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
Serial Communications
ƒ Port Type
ƒ No. of Ports
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Port Connector
Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒ Protection
RS-232/422/485, software selectable
EKI-1221D: 1
EKI-1222D: 2
DB9 male
7, 8
1, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
Software
ƒ OS Support
ƒ Utility Software
ƒ Operation Modes
ƒ Configuration
ƒ Protocols
32-bit/64-bit Windows 2000/XP/Vista/7 and Windows
Server 2003/2008 (x86 and x64)
Advantech Serial Device Server Configuration Utility
Modbus RTU Master/Slave mode
Modbus ASCII Master/Slave mode
Windows Utility, Web Browser
Modbus RTU, Modbus TCP, Modbus ASCII
ƒ Reboot Trigger
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Mechanics
ƒ
ƒ
ƒ
ƒ
Dimensions (W x H x D) 37 x 140 x 95 mm (1.46" x 5.51" x 3.74")
Enclosure
Metal with solid mounting hardware
Mounting
DIN-rail, Wall
Weight
EKI-1221D: 0.58 Kg
EKI-1222D: 0.588 Kg
Power Requirements
ƒ Power Input
ƒ Power Connector
ƒ Power Consumption
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1221D: 2 W
EKI-1222D: 2.5 W
Environment
ƒ Operating Temperature -10 ~ 60°C (14 ~ 140°F)
ƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
ƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
ƒ EMC
ƒ Hazardous Location
EN 55022, EN 55011, EN 61000-6-4, IEC 61000-42/3/4/5/6/8, FCC 47 CFR Part 15 Subpart B (Class A)
Class I, Division 2
Ordering Information
ƒ EKI-1221D
1-port Modbus Gateway with Ethernet Cascading
ƒ EKI-1222D
2-port Modbus Gateway with Ethernet Cascading
* All items include 1 pc OPT1-DB9 D-Sub9 to Terminal Converter
11-12
Serial Device Servers and IP Gateways
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement