Shimadzu | EP-90 | SHIMADZU ELECTRONIC BALANCES

SHIMADZU ELECTRONIC BALANCES
C054-E032G
SHIMADZU
ELECTRONIC
BALANCES
General Catalog
JQA-0376
Founded in 1875, Shimadzu Corporation, a leader in the
development of advanced technologies, has a distinguished
history of innovation built on the foundation of contributing to
society through science and technology. We maintain a global
network of sales, service, technical support and applications
centers on six continents, and have established long-term
relationships with a host of highly trained distributors located
in over 100 countries. For information about Shimadzu, and to
contact your local office, please visit our Web site at
www.shimadzu.com
For information about Shimadzu Electronic Balances,
please visit our Web site at
www.shimadzu.com/balance
SHIMADZU CORPORATION. International Marketing Division
3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan
Phone: 81(3)3219-5641 Fax. 81(3)3219-5710
URL http://www.shimadzu.com
The contents of this brochure are subject to change without notice.
Printed in Japan 4595-12601-60A-NS
1875
1920 1918
1930
1940
1950
1958
1950
Type L
Model.5
1930
Establishment of SHIMADZU CORPORATION
Commence Tortion Balance and
Top-pan Balance production
Chemical Balance
1939 Large-capacity Balance
DODIQ
SHIMADZU
ELECTRONIC BALANCES
Direct-Reading Balance
Direct-Reading Balance
SHIMADZU : A Tradition of Weighing Exper tise
Shimadzu Corporation was established in 1875 in Kyoto, Japan,
as one of the pioneers of scientific precision instruments.
1960
1960
AL-3
Automatic
Direct-Reading Balance
1965
AL-7
Top-pan and torsion balance production started in 1918,
and equal-beam analytical balances were introduced in 1925.
Since their release, the continuous improvement of Shimadzu
balances has contributed to research and development across
all industries.
Automatic Direct-Reading Balance
1967
1970
LU-T1100
Top-loading Direct-Reading Balance
1970 AL-8 Automatic
Direct-Reading Balance (All-digital display)
1970
Digibalance D-1003
1973
C-160
Electronic Balance
Direct-Reading Carat Balance
1976
NL-200P
Direct-Reading Balance
1980
1981 EB-2800M
Electronic Animal Balance
1981 AEL-160
Electronic Analytical Balance
1985 AEL-200 Electronic Analytical
Balance (Full-range electro-magnetic)
1985 PSC Fully-automatic calibration
based on temperature change detection
1989 EB-K Precision platform balances
with OPF (later renamed UniBloc)
1990
1993 AEM-5200
Micro Balance
1997 First electronic balances
with WindowsDirect
2000
2004 MOC-120H
UniBloc moisture balance
2003 New UniBloc balance line-up
Around the turn of the 20th Century, precision weighing was a
time-consuming practice performed only by experienced
operators. Placing the sample and small masses on pans hung
from a beam scale with a moving indicator was a tedious
process. Shimadzu strove continuously to streamline weighing
procedures. The introduction of the direct reading analytical
balance (patented in Japan in 1948) signified a new era in
weighing technology. In the Type L balance, the sensitive massloading work was replaced by convenient dial operations.
Users reduced weighing time by 66%, and consequently
reduced demand for conventional balances.
Shimadzu then added the top-loading direct reading balance
with Roberval’s mechanism in 1959. Until recently many of
these instruments were still utilized in modern laboratories.
SHIMADZU
ELECTORONIC
BALANCES
Contents
Shimadzu continued to pioneer new technologies, releasing its
first electronic balance in 1971-the Digibalance.
This release marked a milestone in precision weighing,
introducing simplicity and ease of use to analytical weighing.
Six years later (1977), the application of microprocessors in
electronic balances further enhanced weighing performance.
The compact ED Series provided substantial improvements in
sensitivity, resolution, and stability.
More recently, Shimadzu has introduced user-friendly
instruments and features to the market, such as :
the temperature-based fully-automatic calibration in 1985,
the first one-piece forcecell (OPF, later renamed UniBloc) in
1989, the high-sensitivity AEM-5200 Micro Balance in 1993,
and the unique Windows® Direct feature perfectly suited for the
computerized laboratory of the 21st Century.
Moving forward, Shimadzu is committed to providing innovative
products for the analytical marketplace.
One of the latest achievements is AUW-D series,
the world’s first semi-micro balances with the advantages of
UniBloc one-piece forcecell technology.
APPLICATION
BALANCES
OTHERS
P 04 - Quick reference by capacity and
minimum display
P 11 - UniBloc Precision Platform Balances
P 15 - Specific Gravity Measurement Kit
P 04 - Features and Symbols
P 12 - Analytical Balances
P 15 - Animal Balances
P 06 - UniBloc Family of Balances
P 12 - Top-Loading Balances
P 16 -Optional Accessories
P 06 - UniBloc Family of Balances
P 13 - Portable Electronic Balances
P 17 -Optional accessories list
P 09 - UniBloc Top-Loading Balances
P 14 - Electronic Moisture Balances
P 18 -Physical Dimensions
Quick reference by capacity and minimum display
Quick reference by capacity and
minimum display
WindowsDirect
Experience it!
Semi-micro
Balances (P.7)
• Place the cursor at the
desired position in your
Windows application.
Test sample A
060315-07
Analytical
Balances (P.8 and P.12)
(1)
Press
[PRINT] key
• Press the [PRINT] key
on the balance.
PRINT
Portable Electronic
Balances (P.13)
• The weighed result
will be directly typed
there.
Test sample A
Top-loading Balances
UW/UX Series (P.9)
BL Series (P.12)
as if typed from the
(2) Sent
computer keyboard !
060315-07
7.80315
Any application on
Windows® :
e.g. Excel, Word etc.
Precision
Platform Balances (P.11)
All that you need to add is just
one cable!
No communication software is required!
Features and Symbols
REDUCE MANUAL CALIBRATION WORK
f Perfect Self Calibration
The balance self-calibrates when it detects temperature changes that
would affect accuracy. Operator is released from constantly monitoring
surrounding conditions.
A Clock-CAL
Fully automated feature initiates self-calibration at set time intervals, using
motor-driven internal calibration weight. Up to three automatic calibrations
per day may be pre-set to coincide with work schedules or to meet specific
quality goals.
B Internal Calibration
Calibration can be performed any time with a simple push-button operation.
c One-lever CAL
Single lever operation loads and unloads built-in calibration weight.
GLP, GMP, AND ISO9000 CONFORMANCE
i Calibration Report
With optional printer connected to the balance, calibration reports which
meet the requirements of GLP, GMP, and ISO9000 can be produced.
D
Built-in Clock
Date and time can be readily supplied by the balance.
O Piece Counting Mode
u Checkweighing
G Analog Bar Graph Display
. Dry Battery Operation
Piece counting function is a standard feature.
Allows viewing of remaining capacity.
P Specific Gravity Measurement
Software for specific gravity measurement is pre-installed. Simply add
optional specific gravity kit for efficient measurements.
APPLICATION SPECIFIC FEATURES
L WindowsDirect (See p.5)
Weighed result is directly typed at the cursor position of any application on
Windows® OS. No communication software is required.
M Built-in RS-232C Interface
RS-232C interface is a standard feature.
Standard Below-weigh Hook
Measurement beneath the balance is possible.
4
Interval Timer Output
Data can be automatically output at pre-set time intervals.
Auto Print
Utilized in quality control applications.
Portable for use in the field.
OTHER FEATURES
0 UniBloc
Single-block technology brings high performance and durability.
/ Backlight
Easy to read in any environment.
R All-metal Housing
All metal construction for high durability.
Data can be automatically output as each measurement is made.
4
5
UniBloc Family of Balances
UniBloc Family of Balances
[ UniBloc Analytical Balances ]
Shimadzu introduced one piece force cell technology for precision balances in
1989. Today’s UniBloc is created by high-precision electric discharge wire
processing applied to a block of aluminum alloy, and replaces the conventional
electro-magnetic balance sensor assembly. UniBloc’s compact, uniform structure
ensures stable temperature characteristics, excellent response time and stable
corner-load performance. The UniBloc design permits a consistancy of production
that assures reliability and a long operational life.
The updated UniBloc technology expanded the UniBloc balance line up,
which now ranges from semi-micro with minimum display of 0.01mg to precision
platform balances up to 52kg in capacity.
AUW-D series dual-range semi-micro balances
AUW/AUX/AUY series
[ UniBloc Top-loading Balances ]
UW/UX series
[ UniBloc Precision Platform Balances ]
BW-K/BX-K series
One piece force cell patented in USA in 1989, No.4799561, in China in 1991, No.12729, in Japan in 1995, No.1905686
UniBloc Analytical Balances
AU W- D se rie s d u a l-ran g e s emi- micro balances
AU W / AU X/AU Y s e rie s a n aly t ical balances
dual-range semi-micro balances
AUW-D series
fABiDLMOGP
4
0R
AUW-D dual-range semi-micro balances are the first five-decimal balances with
the advantages of UniBloc one-piece force cell technology.
Excellent Weighing Performance
• Compact UniBloc mechanism and digital processing technology
produce fast response and stability at the same time.
• Microprocessor digital control can be set to automatically provide
the most suitable data processing for the installation environment
and weighing application.
User-friendly Features
• Weighing work is made easy by the smooth door movement.
UniBloc Analytical Balances.
Measurement results can be transmitted to Excel or other Windows
applications without any software installation to your computer.
All you have to add is one RS-232C cable.
Windows® Direct works with Windows® 95, 98, NT4.0, 2000, ME and XP.
PC must be IBM PC/AT compatible.
• Piece counting, various mass units, below-weigh hook, specific
Excellent response, stability and zero return performance – in a semi-micro balance.
It is easy to remove and replace the door rails for cleaning.
• The embossed key panel sheet provides clear clicking response as
operated. The key operations can be confirmed with a gentle
beeping sound, too.
• Level adjustment can be performed with ease.
For Application
• Shimadzu’s unique WindowsDirect is a standard feature for all the
Choose one of the two models according to your field requirements.
fA Choice of fully-automatic calibrations : PSC and Clock-CAL
Operator can choose from two types of
fully-automatic span calibration
methods. “PSC” is initiated based on
temperature change detection, and
“Clock-CAL” operates at user pre-set
times (up to three times a day).
i GLP/GMP/ISO calibration report
Calibration report can be automatically printed out with the optional electronic printer.
Date and time are also output to meet GLP/GMP/ISO requirements.
L WindowsDirect (See p.5)
Weighed data can be directly typed into any Windows application and no interface software is required.
gravity measurement software are all standard features.
Model
6
Capacity
Minimum display
Pan size(mm)
Internal calibration
Internal calibration modes
AUW220D
220g/82g
0.1mg/0.01mg
80 dia
PSC, Clock-CAL, any time with key touch
AUW120D
120g/42g
0.1mg/0.01mg
80 dia
PSC, Clock-CAL, any time with key touch
WindowsDirect
7
UniBloc Family of Balances
UniBloc Top-Loading Balances
Analytical balances
Top-Loading Balances
AUW/AUX/AUY series
AUW
AUX
AUY
UW/UX Series
fABiDLMOGP 4 0/R
fBiDLMOGP 4 0R
LMOGP 4 0R
UW
UX
fABiDLMOGP 4 u0/R
iDLMOGP4
u0/R
The new line of Shimadzu top-loading balances are engineered with the UniBloc mechanism resulting
in unrivaled response, stability and durability. Powerful features support any imaginable weighing
application. UW Series includes internal calibration and fully-automatic calibration functions.
AUW/AUX/AUY models are the newest single-range analytical balances
engineered with the UniBloc technology. This provides especially fast response
and superb stability.
Large-pan model
Small-pan model
(minimum display 0.01g)
f PSC, fully-automatic calibration (AUW/AUX models)
Small-pan model
(minimum display 0.001g)
* The delivered windbreak
may differ from the photo
Calibration is carried out when temperature change has been detected.
A Clock-CAL, fully-automatic calibration (AUW models only)
Calibration carried out at user-preset times (up to three times a day).
Operators can work without unexpected interruptions.
i GLP/GMP/ISO calibration report (AUW/AUX models only)
i GLP/GMP/ISO calibration report
Meets requirements of GLP/GMP/ISO9000. Calibration reports can be output with date and time,
provided by the built-in clock.
Meets requirements of GLP/GMP/ISO9000. Calibration reports can be output with
date and time, provided by the built-in clock.
Example of calibration record
Gu Analog display modes
L WindowsDirect (See p.5)
Bar graph display
Weighed data can be directly typed into any Windows application and no interface software is required.
Bar graph clearly indicates the total weight (including the tare) as a portion of the balance capacity.
Target weighing
/ Backlight LCD (AUW models only)
Select a target weight and tolerance. The display clearly indicates when they are reached.
LCD with backlight can be read with ease and comfort under any lighting condition.
Checkweighing
Set an upper and lower threshold. The display continually indicates whether the sample is within the range
“GO”, over range “HI” or under range “LO”. Choose one of two checkweighing bar graph display modes.
The results can also be output to external devices.
Model
Capacity
Minimum display
Pan size(mm)
Internal calibration Internal calibration modes
AUW320
320g
0.1mg
80 dia
PSC, Clock-CAL, any time with key touch
AUW220
220g
0.1mg
80 dia
PSC, Clock-CAL, any time with key touch
AUW120
120g
0.1mg
80 dia
PSC, Clock-CAL, any time with key touch
AUX320
320g
0.1mg
80 dia
PSC, any time with key touch
AUX220
220g
0.1mg
80 dia
PSC, any time with key touch
AUX120
120g
0.1mg
80 dia
PSC, any time with key touch
AUY220
220g
0.1mg
80 dia
AUY120
120g
0.1mg
80 dia
WindowsDirect
f PSC, fully-automatic calibration (UW only)
Calibration is carried out when temperature change has been detected.
A Clock-CAL, fully-automatic calibration (UW only)
Calibration carried out at user-preset times (up to three times a day).
Operators can work without unexpected interruptions.
UW/UX Series continued
8
9
UniBloc Family of Balances
UniBloc Precision Platform Balances
Precision Platform Balances
L WindowsDirect (See p.5)
BW-K/BX-K Series
Weighed data can be directly typed into any Windows application and no interface software is required.
BW-K ciDLMOGPu
BX-K
Auto Print
iDLMOGPu
0
0
The Shimadzu Precision Platform balances have been engineered
with the innovative UniBloc mechanism since 1989. Powerful features
support any imaginable weighing application. BW-K Series includes
internal calibration weight.
Automatically outputs data as each measurement is made. Combination with WindowsDirect makes up
a handy weigh-and-record system.
BW-K Series
Auto Print and WindowsDirect
i GLP/GMP/ISO calibration report
(1) Just place it on the pan
All that you need to add is
just one cable!
Meets requirements of GLP/GMP/ISO9000. Calibration reports can be output with date and time,
provided by the built-in clock.
No communication
software is required!
Gu Analog display modes
Available as standard with
AUW-D/AUW/AUX/AUY,
UW/UX, BW-K/BX-K
series.
Bar graph display
Bar graph clearly indicates the total weight (including the tare) as a portion of the balance capacity.
Target weighing
Select a target weight and tolerance. The display clearly indicates when they are reached.
Checkweighing
(2) Automatically sent to the cell
Set an upper and lower threshold. The display continually indicates whether the sample is within the range
“GO”, over range “HI” or under range “LO”. Choose one of two checkweighing bargraph display modes.
L WindowsDirect (See p.5)
/ Back light LCD
Weighed data can be directly typed into any Windows application and no interface software is required.
LCD with back light can be read with ease and comfort under any lighting condition.
f Large-size calibration weight (BW-K only)
Unit coversion and piece counting function
For accurate internal calibration. Calibration can be performed by simple lever operation.
Weight value can be presented in 22 different units and modes, including percentage, carat, specific gravity,
lb, oz, and others. Users can pre-register any combination of units depending on their needs.
Piece counting function is standard.
Minimum
display
Pan size(mm)
approx.
Model
Pan type
Minimum
display
Pan size(mm)
approx.
Model
220g
0.001g
108X105
UX220H*
Small-pan
420g
0.001g
108X105
UX420H*
Small-pan
220g
0.001g
108X105
BW12KH
12kg
0.1g
345X250
Built-in
BX12KH
12kg
0.1g
345X250
Extermal
420g
0.001g
108X105
BW22KH
22kg
0.1g
345X250
Built-in
BX22KH
22kg
0.1g
345X250
Small-pan
620g
0.001g
108X105
UX620H*
Extermal
Small-pan
620g
0.001g
108X105
BW32KH
32kg
0.1g
345X250
Built-in
BX32KH
32kg
0.1g
345X250
UW2200H
Large-pan
2200g
0.01g
170X180
Extermal
UX2200H
Large-pan
2200g
0.01g
170X180
BW32KS
32kg
1g
345X250
Built-in
BX32KS
32kg
1g
345X250
UW4200H
Large-pan
4200g
0.01g
Extermal
170X180
UX4200H
Large-pan
4200g
0.01g
170X180
BW52KS
52kg
1g
345X250
Built-in
BX52KS
52kg
1g
345X250
UW6200H
Large-pan
6200g
Extermal
0.01g
170X180
UX6200H
Large-pan
6200g
0.01g
170X180
UW420S
Small-pan
UW820S
Small-pan
420g
0.01g
108X105
UX420S
Small-pan
420g
0.01g
108X105
820g
0.01g
108X105
UX820S
Small-pan
820g
0.01g
UW4200S
108X105
Large-pan
4200g
0.1g
170X180
UX4200S
Large-pan
4200g
0.1g
UW8200S
170X180
Large-pan
8200g
0.1g
170X180
UX8200S
Large-pan
8200g
0.1g
170X180
Model
Pan type
UW420H*
Small-pan
UW420H*
Small-pan
UW620H*
Capacity
Capacity
Capacity
Minimum
display
Pan size(mm) Calibration
approx.
weight
Model
Capacity
Minimum
display
Pan size(mm) Calibration
approx.
weight
*Models with minimum display of 0.001g come with a standard windbreak.
10
11
Analytical Balances, Top-Loading Balances, Portable Electronic Balances
Analytical Balances
Portable Electronic Balances
Analytical Balances
Portable Electronic Balances
AW/AX/AY Series
AW
AX
AY
EL/ELB Series
fABiDLMOGPR
BiDLMOGPR
BiDLMOGPR
.
ELB only
OP
Optional built-in battery makes it readily portable with no compromise in accuracy.
EL Series
EL Series
ELB Series
AX Series
AW Series
AY Series
f Fully-automatic calibration; PSC (AW only)
Calibration is carried out when temperature change has been detected.
A Clock-CAL function (AW only)
Calibration carried out at user-preset times (up to three times a day).
Operators can work without unexpected interruptions.
i GLP/GMP/ISO calibration report
Meets requirements of GLP/GMP/ISO9000. Calibration reports can be output
with date and time, provided by the built-in clock.
L WindowsDirect (See p.5)
Weighed data can be directly typed into any Windows
application and no interface software is required.
Model
Capacity
AW320
320g
Minimum Pan size Internal
calibration
display
(mm)
Internal calibration modes
0.1mg
PSC, Clock-CAL, any time with key
80 dia
Windows
Direct
AW220
220g
0.1mg
80 dia
PSC, Clock-CAL, any time with key
AW120
120g
0.1mg
80 dia
PSC, Clock-CAL, any time with key
AX200
200g
0.1mg
80 dia
any time with key touch
Unit conversion
AX120
120g
0.1mg
80 dia
any time with key touch
Automatic unit conversion at the push of a button.
Carat, and other units are standard.
AY220
220g
0.1mg
80 dia
AY120
120g
0.1mg
80 dia
High sensitivity and stability
Improved internal resolution provides extra accuracy.
O Various application modes
Standard specific gravity software
Top-Loading Balances
OG
Digital stability control
User-selectable parameters for high-vibration environments provide
dependable results.
High-resolution balances made affordable
Quick response
Large-pan model
Small pan model
Small pan model
with windbreak
BL3200HL
O Piece counting function
BL220H
*
*
Capacity
Minimum Pan size(mm)
display
approx.
Small-pan
220g
0.001g
100X100
Small-pan
320g
0.001g
100X100
G Analog bar graph display
BL2200H
Large-pan
2200g
0.01g
164X124
BL3200H
Large-pan
3200g
0.01g
164X124
Remaining weighing capacity can be seen at a glance.
BL3200HL
Large-pan
3200g
0.01g
164X124
BL320S
Small-pan
320g
0.01g
100X100
BL620S
Large-pan
620g
0.01g
164X124
BL3200S
Large-pan
3200g
0.1g
164X124
Piece counting function is standard.
BL320H
Compact body
This electro-magnetic precision balance is as compact as a portable scale.
12
Pan type
AC adaptor is required
N/A
optional
ELB Series
AC adaptor is required
standard
N/A
Pan type
Capacity
Minimum
display
Calibration
weight
EL120/ELB120
Small-pan
120g
0.01g
110dia
EL200/ELB200
Small-pan
200g
0.01g
110dia
EL300/ELB300
Small-pan
300g
0.01g
110dia
EL600/ELB600
Large-pan
600g
0.05g
170X130
EL600S/ELB600S
Large-pan
600g
0.1g
170X130
EL1200/ELB1200
Large-pan
1,200g
0.1g
170X130
EL2000/ELB2000
Large-pan
2,000g
0.1g
170X130
EL3000/ELB3000
Large-pan
3,000g
0.1g
170X130
EL6000S/ELB6000S
Large-pan
6,000g
1g
170X130
EL12K/ELB12K
Large-pan
12,000g
1g
170X130
Totally portable
. Two-way power supply (AC or Battery operation)
Very fast response for operator comfort and efficiency.
Model
Rechargeable
battery operation
EL Series
Model
Optional specific gravity kit is available for extra efficiency.
BL3200HL
only
Dry battery operation
Stable results are quickly displayed.
Top-Loading Balances
/
AC operation
Quick response
Piece counting, percent display, and specific gravity modes are easily
accessible.
BL Series
Series
Optional built-in rechargeable battery (EL Series) or dry battery operation
(ELB Series) makes it portable
This whole system can be operated with dry batteries.
*Models with minimum display of 0.001g come with a standard windbreak.
13
Application Balances
Application Balances
Electronic Moisture Balance
MOC-120H
Dimensions
SMK Specific Gravity Measurement Kits
LM0/
Simple specific gravity meters based on
precision balances.
Large sample pan and capacity allow any
sample to be laid out for the best drying
conditions.
Reliable UniBloc weighing mechanism and
unique auto-taring system enable accurate
measurements.
Large sample pan and auto-taring mechanism
A larger sample pan contributes to accurate measurements,
but the larger heat capacity of it normally results in a larger zero
drift in the precision weighing.
The MOC-120H is equipped with a unique auto-taring mechanism,
which eliminates the zero drift continuously and ensures high
accuracy, even with a larger sample pan.
UniBloc technology for precision weighing
Shimadzu’s UniBloc cell is used as the core mechanism of the
weighing part.
Its uniform structure maintains the high performance of precision
weighing under repeated heating / cooling.
MOC-120H
with 130mm
sample pan
Measuring method
Heat drying and weight loss
Sample pan size
130 mm dia
Sample pan material
Stainless steel
Minimum display in weighing
0.001g
Measurement range of
0.01% to 100.00 %
moisture content
Sample capacity
120g
Measurement modes
Automatic or Timed ending modes,
Mid-wave infrared quartz heater
Temperature range
30 to 200°C
Digital output
Complete test data including instrument settings
the data in tabular or graphical style. Excel®
Spread Sheets can receive the data without
communication software (WindowsDirect).
Dimensions
220W X 415D X 190H (mm)
Weight
4.5kg
Operational temperature and
5 to 40°C, 85% RH or lower
humidity range
The final result is predicted from the drying process,
saving time in repeated measurements.
Stored procedures
10
Standard accessories
Sample pan 2pcs, Sample pan handler 2pcs,
14
AC100 to 127 / 220 to 240V, 640W
maximum
Aluminum sheet 20pcs, Spoon, Spatula
Optional accessories
Balance Series
SMK-401
AUW-D/AUW/AUX/AUY
SMK-301
AW/AX/AY
SMK-101
UW/UX (Capacity 2200g or more)
100g
SMK-102
UW/UX (Capacity 420g-820g)
270g
SMK-201
EL/ELB (Capacity 600g-6000g)
200g
0g
0g
A sinker is additionally needed for liquid density measurement.
Measurements can be
printed out in tabular or
graphical style.
fABiDLMGu0/R
UX* iDLMGu0/R
BW-K* ciDLMGu0
BX-K* iDLMGu0
UW*
When animal weighing mode is not used, all the functions
* indicated
on p.9 or p.11 are available.
Electronic Balances
for Weighing Animals
UW Series
Aluminum sheet 500pcs, Printer paper for
optional electronic printer
Electronic printer
Animal Balances
Temperature calibration kit,
Electronic printer, RS-232C Cable
Consumables
Optional Accessories
The temperature at
the sample position
can be directly
measured.
Reduced Capacity Sample Phase
(approx.)
Solid Liquid
Model
(by 1°C increments)
Power requirements
Temperature
calibration kit
SMK-101
modes, Predictive Measuring mode
Drying heater
Predictive measuring mode
Complete sample data and instrument settings can be directly typed
into any application on Windows® and no interface software is
required.
SMK-401
Standard, Rapid, Slow and Step drying
Mid-wave infrared quartz heater
L WindowsDirect
Order one of the balances and the corresponding specific
gravity measurement kit.
Liquid density can also be measured with a sinker
(except for EL/ELB Series).
Moisture content minimum display 0.01%
can be output. Optional electronic printer prints
Mid-wave infrared quartz heater provides effective drying for a wide
range of samples. Besides the excellent drying performance,
it offers a long operational life of 20,000 to 30,000 hours.
Therefore, the long-term operational cost is much lower than
halogen lamp heaters.
Combine your Shimadzu balance with a specific gravity
measurement kit for handy specific gravity measurements.
Software for specific gravity measurement is pre-installed in all
AUW-D / AUW / AUX / AUY, AW / AX / AY, UW / UX, and
EL / ELB Series.
Dedicated software brings quick and reliable
results of live animal weighing
Upon removing the weighed animal, the weight of remaining feces and
output are automatically tared off, and the balance presents zero for
the next animal.
Display response and stability can be optimized according to the level
of animal movement and the environmental conditions.
BW-K plus Medium-size
Animal Bucket
Model
BW-K plus Large Animal Bucket
Balance Series
Reduced Capacity
(approx.)
Small Animal
UW/UX (Capacity 2200g or more)
Bucket set
Bottom 110dia,
Top 200dia,
Height 130
Medium-size
Animal Bucket
set *1
Bottom 305 X215,
Top 377 X 245,
Height 215
Large Animal
Bucket set
*2
BW-K
BX-K
BW-K (Capacity 22kg or more)
BX-K (Capacity 22kg or more)
Bottom 335 X 245,
Top 445 X 395,
Height 345
is reduced about 2kg
*12 Capacity
* Capacity is reduced about 6kg
*1,2 Production on demand
15
Optional Accessories
Optional Accessories
Electronic Printer
NEW
EP-80
Optional accessories list
Dimensions
EP-90
Balances
Optional accessories
Balances
Optional accessories
AUW-D/
AUW / AUX / AUY
Series
Electronic Printer EP-80 / EP-90
UW / UX Series
Electronic Printer EP-80 / EP-90
Foot Switch FSB-102TK (For taring)
Foot Switch FSB-102PK (For printing)
Specific Gravity Measurement Kit SMK-401
Application Keyboard AKB-301
RS-232C Cable, for IBM PC/AT Compatibles, (25P-9P, Null modem, 1.5m)
AW / AX/ AY
Series
EP-80
EP-90
Common features for EP-80 and EP-90
•
•
•
•
•
•
•
Simple connection to balances using the cable provided.
Uses normal paper, suitable for long-term storage
compatible with GLP/GMP/ISO (dot impact method).
Operation can be powered by AC adapter or dry batteries
Hassle-free long-use printer paper rolls
(8000 lines of printing withone roll).
High-speed printing at approx. 3 lines/sec
(printer mechanism performance).
Installed with statistical calculation function as standard.
Can be used simultaneously with Shimadzu's unique
WindowsDirect function (output to computer).
Static Remover
STABLO-EX
Secure static removal
• Equipped with keyboard, capable of defining ID
•
Foot Switch FSB-102TK (For taring)
Foot Switch FSB-102PK (For printing)
Specific Gravity Measurement Kit SMK-301
EP-90 Capable of Attaching Sample/ID Numbers,
Date and Time to Each Measurement Result
•
Electronic Printer EP-80 / EP-90
Balances
number (fixed input number),
and sample number(number input and then
increased automatically with each printing).
Printing of date and time (when connected to an
electronic balance with a built-in clock) can be
controlled from the printer.
Multiplication and comparator functionality built-in.
BL Series
Optional accessories
Electronic Printer EP-80 / EP-90
In-use Protective Cover (5 pcs)
Simple Windbreak
Lid for Simple Windbreak
EL / ELB
Series
Electronic Printer EP-80 / EP-90
RS-232C Interface IFB-102A
Rechargable Built-in Battery (Not for ELB Series)
EP-90 print-out sample
NEW
Shimadzu’s unique
2-WAY ionizer
Hand-held / On stand
RS-232C Cable, for IBM PC/AT Compatibles, (25P-9P, Null modem, 1.5m)
In-use Protective Cover (5 pcs)
Specific Gravity Measurement Kit SMK-201
(Cannot be used with small-pan models)
•
RS-232C Interface IFB-102A (for multiple connection)
•
BW-K / BX-K
Small Size Windbreak (for models with capacity of 300g to 620g only)
Series
(items with only) (Std.Acc. for models with readability of 1mg)
Glass Windbreak (for models with capacity of 220g to 820g only)
•
Large Size Windbreak (for all models)
Specific Gravity Measurement Kit SMK-101
(for models with capacity of 2200g and up only)
Specific Gravity Measurement Kit SMK-102
(for models with capacity of 420g to 820g only)
In-use Protective Cover (5 pcs)
Comparator Lamps 100V (needs IFB-RY1 and RY1 Connection Cable)
Interface for comparator IFB-RY1 100V
Foot Switch FSB-102PK (For printing)
*
•
Foot Switch FSB-102TK (For taring)
RS-232C Cable, for IBM PC/AT Compatibles, (25P-9P, Null modem, 1.5m)
RS-232C Cable, for multiple connection (25P-25P, Null modem, 1.5m)
Application Keyboard AKB-301
•
Remote Display Unit RDB-201 with operation keys
Remote Display Unit RDB-202
Angle Adjuster and Wall Hook for Remote Display
Stand for Remote Display (1m high)
* Not available in EU.
Optional accessories Dimensions
The excellent ion polarity balance achieved by the AC method ensures :
• No inverse charging
• Wide angle static removal
• High performance maintained over a long period of use
UW/UX large-pan model
with large size windbreak
(optional accessory)
UW/UX small-pan model
with glass windbreak
(optional accessory)
Space saving design
Compact main unit requires minimal space. Holder height and angle are adjustable.
Quickly discharge container or bulk samples
with fan ON.
16
For powdered samples, fan can be turned OFF.
As a handheld unit
17
Physical Dimensions
Physical Dimensions
AUW-D/AUW/AUX/AUY Series
Measurements in mm. 1mm=.03937"
AW/AX/AY Series
BL Series
168
Large-pan model
2
Sensor
Small-pan model
3.6
0
1.5
ø2
1.5
134
172
440
Case bottom
16.5
5
2
253
3.5
BELOW-WEIGH HOOK
Figure shows combination with windbreak (standard only for BL220H and BL320H)
423
EL/ELB Series
235
185
356
338
223
Large-pan model
Small-pan model
126
99
ø80
24
6.5
163
309
Figures show EL series. ELB Series has a battery lid.
BELOW-WEIGH HOOK
217
BW-K Series
UW/UX Series
3
4.5
180.5
Small-pan model * 1
58
109
180
84
3
4
0.7
119
118
57
17
BELOW-WEIGH HOOK
80
4.6
BX-K Series
379
ø2
202
0
Large-pan model
85
103
5
191
5
78.8
78.8
9
166
191
317
BELOW-WEIGH HOOK
317
(364)
BELOW-WEIGH HOOK
Figure shows combination with simple windbreak (standard only for models with minimum disply of 0.001g)
* 11 The
actually delivered windbreak may slightly differ in size and shape.
*
18
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising