Escene ES220 User manual
ES220 IP Phone
User Manual
(firmware:v1.0.2.9-777)
Escene Communication Co .,Ltd
www.escene.cn/en
Escene Communication
Tables of Contents
1. Getting Started.............................................................................................................................1
About ........................................................................................................................................1
Feature Highlights: ...................................................................................................................1
Technical Features ....................................................................................................................1
2. Connecting Your Phone...............................................................................................................3
3. Phone overview ...........................................................................................................................4
Understanding Buttons and Hardware ......................................................................................4
Understanding Phone Screen Features......................................................................................6
4. Basic Call Handling ....................................................................................................................7
Placing a Call ............................................................................................................................7
Answering a Call ......................................................................................................................8
Ending a Call ............................................................................................................................8
Using Hold and Resume (Switch Calling Line)........................................................................9
Transfer Calls............................................................................................................................9
Using Mute ...............................................................................................................................9
Do Not Disturb........................................................................................................................10
3-way Conference ...................................................................................................................10
5. Advanced Call Handling ........................................................................................................... 11
Using the Phone Book ............................................................................................................ 11
Using Call Logs ......................................................................................................................13
6. Keypad Instruction ....................................................................................................................14
SIP Account Settings...............................................................................................................14
Network Setting ......................................................................................................................15
PC Port....................................................................................................................................16
Load default settings ...............................................................................................................16
Modify password ....................................................................................................................16
Language setting .....................................................................................................................17
Customizing Rings and Volume..............................................................................................17
View status..............................................................................................................................18
Diagnose .................................................................................................................................18
7. Web Settings..............................................................................................................................19
Config Guide...........................................................................................................................19
Network ..................................................................................................................................21
SIP Account ............................................................................................................................22
Audio ......................................................................................................................................23
PhoneBook..............................................................................................................................24
Group ..............................................................................................................................24
Contact ............................................................................................................................25
LDAP ..............................................................................................................................25
BanList............................................................................................................................26
Enterprise Phonebook .....................................................................................................27
Advanced ................................................................................................................................27
www.escene.cn/en
Escene Communication
Phone Setting ..................................................................................................................27
VLAN Setting .................................................................................................................29
VPN Setting ....................................................................................................................30
Dial Plan setting..............................................................................................................30
Global SIP.......................................................................................................................32
Phone Maintenance.................................................................................................................32
Log ..................................................................................................................................32
Default Setting ................................................................................................................33
Auto Provision ................................................................................................................34
FTP Upgrade ...................................................................................................................35
TFTP Upgrade.................................................................................................................36
HTTP Upgrade ................................................................................................................37
Reboot .............................................................................................................................38
Phone Status............................................................................................................................39
System Info.............................................................................................................................40
About ......................................................................................................................................40
Appendix:.............................................................................................................................42
www.escene.cn/en
Escene Communication
ES220 IP Phone
1. Getting Started
About
ES220P is a popular type IP Phone in Sayhi phones series, with modern design, functional,
practical and voice clarity characteristics. It accomplished the powerful telephony features by
cooperating with the communications platform, such as call transfer, hotline, multi-party
conferences, voice mail, interruption-free, etc.
Feature Highlights:
l
l
l
l
l
l
l
HD Voice: HD Codec
Support unified maintenance and auto upgrade
Support Plug and Play
Enterprise Phone Book
Support PSTN interface
Support Headset interface
Support PoE and AC power adapter
Technical Features
Item
Screen
Technical Features
Graphic LCD with background light
16*2 characters
Language
Line
Support Multi-Module
2 VoIP Line
Function
Keys
6 Navigation keys (arrow button, OK button, C button)
Volume button (multiplex up and down keys)
Hands-free
Headset
Message
Hold
Redial
Conference
Transfer
VoIP
Protocol
SIP 2.0
Network
Protocol
HTTP、DHCP、TFTP、*IEEE 802.1Q、*IEEE 802.1X
www.escene.cn/en
Escene Communication
ES220 IP Phone
Codec
QoS
Network
Speech
G.723.1 (5.3K 6.4K b/s)、G.729 A (8Kb/s)、G.711 A/U (64Kb/s), G.722
TOS, Jiffer Buffer, VAD, CNG, G.168 (32ms)
2*RJ45 10/100M Ethernet interfaces(LAN/PC)
IP Assignment: Static IP 、DHCP、PPOE
VPN(L2TP、SSL_VPN)
DNS Clients (Primary and Secondary)
HD Voice: HD Codec/Handset/Speaker(Full-duplex)
Handset, Headset or Hand-free Mode,
Support call centre by headsets
9-levels volume adjustment
Call
Processing
Call Waiting, Call Queuing
Call Forward, Call Transfer, Call Holding, Call Pickup, Callback
Redial,Auto-answer
Phone directory speed dial, call record direct dial
3-way conference
DnD
Voice mail, Voice Prompt, Voice Message
Application
Enterprise phone directory
XML Phonebook
Private phone directory
Security
Management
Power
Supply
Specification
Password Login Web
Signaling encryption
Media encryption
Upgrade: HTTP/TFTP/FTP Auto-provision/TR069
Configurations: Phone/Http/Auto provision/TR069
Debug: Telnet/Phone/Web
Power adapter: AC100~240V input and DC 5V/1.2Aoutput
PoE (IEEE 802.af)
Storage Temperature: 0℃~60℃
Operating Humidity: 10%~90%
Size: 168mm*205mm*85mm
www.escene.cn/en
Escene Communication
ES220 IP Phone
2. Connecting Your Phone
Your system administrator will likely connect your new SayHi ES210 IP Phone to the corporate IP
telephony network. If that is not the case, refer to the graphic and table below to connect your
phone.
1) Open the box of ES210 IP Phone,carefully check the packing list as follow:
Item
IP Phone
Counts
1
Handset
1
Handset Cord
1
Power adapter
1 (need to buy )
RJ45 cable
1
RJ11 cable
1 (ES2xx)
CD
1
Quick Installation
1
Quick User Guide
1
Product certification
1
2) As shown in figure 2.1,please plug Handset Cord into RJ11 interfaces (IP Phone and
Handset),RJ45 cable into the LAN interface;IP Phone will automatically start if IP Phone with
POE function.
3) The phone must work together with power adapter without POE support.
4) If you want connect your computer into LAN at the same time, please connect your
computer to PC interface of the phone with a RJ45 cable.
Figure2.1 Interfaces of SayHi ES220
www.escene.hk
Escene Communication
ES220 IP Phone
3. Phone overview
Understanding Buttons and Hardware
You can identify buttons and hardware on your SayHi ES220 from figure 3.1.
Figure 3.1 SayHi ES220
17
○
18
○
2
○
1
○
6
○
7
○
14
○
3
○
8
○
9
○
10
○
11
○
12
○
13
○
4
○
15
○
5
○
19
○
16
○
6
○
Item
1
Description
message button: when have new message in,
the light will blink red
2
3
Line 1
When you use this line ,the light is red
Headset button: Toggles the headset on or off.
and PSTN
When headset is on, the light is red
.
www.escene.cn/en
Escene Communication
ES220 IP Phone
4
Line 2
When you use this line ,the light is red
5
0-9,*,#
Basic Call Handling: press “#” send out a call by default.
6
Navigation
Allows you to scroll through menus and highlight items. When the
button
phone is on-hook, it becomes a shortcut key as follow:
“Up”: Adjust ring volume,operate with the “down” button
“Down”: Open “Missed Calls” list:
“Left”: Open “Received Calls” list;
“Right”: Open “Dialed Numbers” list.
7
OK
OK button: To confirm the action, it also has a menu button
function; it allows you to scroll through menus.
8
C
Back button: Return to the standby interface.
When in communication press ”C”, it has mute function.
9
CONFERENCE
Conference button: Connect calling / called party to the conference.
10
TRANSFER
Transfer button:Transfer redirects a connected call.
11
HOLD/Pick up
Hold button: Put a call on hold.
12
REDIAL
Redial button: To dial the last number.
13
Speaker button
Speaker button: Toggles the speakerphone on or off.
Red, steady: Pick up and enter normal call.
14
Speaker
Sounds output when hands-free.
15
Handset
Use to sounds in/output.
16
Handset cord
Connects between handset and phone.
17
LCD screen
128*32 characters, grayscale LCD with background light.
18
Light strip
Red flashing: There are incoming call;
Red, steady: Missed Calls, or phone busy;
19
Hands-free
Sounds input when hands-free
microphone
www.escene.cn/en
Escene Communication
ES220 IP Phone
Understanding Phone Screen Features
This is what your main phone screen might look like:
Figure 3.3 SayHi ES220 Phone LCD
1
○
②
Screen displays
1
Line status
Functions
Show the phone line status:
1)
: Disconnect into network.
2)
: Only Peer-to-Peer call.
3)
: Network connected normal, but the
line is not successfully registered.
2
Time and date
4)
: Network is OK and the line is available.
5)
: Line is turned on DND.
Show current time and date(You can set with different sources,
the more 7. Web Setting)
www.escene.cn/en
Escene Communication
ES220 IP Phone
4. Basic Call Handling
You can perform basic call-handling tasks using a range of features and services. Feature
availability can vary; see your system administrator for more information.
Note: The bold type of the following text in table signifies the phone's button.
Placing a Call
Here are some easy ways to place a call on SayHi ES220 IP Phone:
If you want to...
Place a call using
Then…
Pick up the handset
the handset
Place a call using
Press Speaker button
--1) You can hear dial tone;
--2) Enter a number;
--3) Press # button (default),
-or wait 5s (default), then it send the
number automatically.
a speakerphone
Place a call using
Put
on
your
headset,
a headset
active Headset button so
that the status light is
Red
, and then do as
using speakerphone
Redial
--Press REDIAL button to dial the last number,
-or press Navigation button-Right (in Standby interface) > “Dialed
number”, select a number, then select Dial ,and press OK button.
Dial from a call
--1) Press OK button > “Call history”, you can select “Missed calls”,
“Received calls” and “Dialed numbers”,
log
- or press Navigation button (in Standby interface) > select “Missed
calls” (down), “Received calls” (left) and “Dialed numbers” (right) );
--2) Then press OK button .
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing Headset or Speaker button.
www.escene.cn/en
Escene Communication
ES220 IP Phone
• If you make a mistake while dialing, press C button to erase digits.
Answering a Call
You can answer a call by simply lifting the handset, or you can use other options if they are
available on SayHi ES220.
If you want to...
Answer
with
Then...
a
handset
Answer
with
--1) Your phone ring;
--2) Light strip is Red
and flashing;
the
--Pick up the handset
--Press Speaker button
speakerphone
(Non-headset mode)
Answer with the a
--Put on headset, press Headset button
headset
so that the status light is Red
, and
then do as using speakerphone
Auto-answer
--1) Press OK button > “Function setting” > “Auto answer”;
--2) Select “Enable”;
--3) Your phone answers incoming calls automatically after a few rings.
Tips
• Your system administrator configures Auto-answer to use either the speakerphone or a headset.
You might use Auto-answer if you receive a high volume of incoming calls.
Ending a Call
To end a call, hang up. Here are some more details.
If you want to...
Hang up while using the
Then...
-- Return the handset to its cradle
Handset
Hang up while using the
-- Press Speaker button that is Red
www.escene.cn/en
Escene Communication
ES220 IP Phone
speakerphone
--Press Handset button, (Do not keep the headset mode)
Hang up while using the
Headset
Using Hold and Resume (Switch Calling Line)
You can hold and resume calls.
If you want to...
Then...
Put a call on hold
Press HOLD button
Resume a call
Press line button
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
Transfer Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Then...
Talk to the transfer
--1) Press TRANSFER button;
recipient
--2) Enter number;
before
transferring a call
(consult transfer)
--3) press “#”(default) ,
-or wait five seconds(default)then transfer the call
Using Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use
mute in conjunction with the handset, speakerphone, or a headset.
If you want to...
Toggle Mute on
Then...
Press C button, when you are in communication, and want to set Mute
www.escene.cn/en
Escene Communication
ES220 IP Phone
function
Toggle Mute off
Press C button, then the mute off
Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy
tone(Can also be set to their voice mail or other extension numbers, etc.).
If you want to...
Then...
Enable DND on a line
--1) Press OK button > “Function setting” > “DND” > (select line)
“Enable”
--2)
All
enabled
line
on
the
phone
would
changes
to
status.
Press OK button > “Function setting” > “DND” >(select line)
Disable DND
“Disable”
3-way Conference
You can establish a three-party conference, during the conversation three phone parties can
communicate with each other.
If you want to...
Then...
Invite the transfer
recipient
conference
into
a
in
a
transferring
--1)
When
the
transfer
recipient
answer
the
call,
press
CONFERCENCE button on your phone;
--2) Then the held one, transfer recipient and you will be into a
conference, and the LCD will display
status.
Invite the third party
--1) Press CONFERENCE button in an active call;
into a conference in
--2) Enter the third party number;
a active call
--3) After connected the third party, press CONFERENCE button
again
www.escene.cn/en
Escene Communication
ES220 IP Phone
5. Advanced Call Handling
Using the Phone Book
You can store a large number of contacts in your phone's directory. You can add, edit, delete, dial,
or search for a contact in this directory. However, it only can configure the phone book on web
page in SayHi ES220. For details, you can refer to 7.Web Settings.
However, you can dial from Phone Book on the phone after setting phone book on web page.
If you want to….
Then……
Call
--1) Press OK button> “Phone book”
from
phone
book
--2) Select “Personal phone book”>“View ALL”
-or select a contact who are belong to different group
--3) Select a contact and a number, then press OK button
--1) Press OK button> “Phone book”
Add group
--2) Select “Personal phone book”>“Modify”
--3) Select the “Add group” then press OK button
--4) Use the navigation keys to select content, press OK button to set
and modify:
-Group name: name of the group
--5) Press “OK” to complete
Add Contacts
--1) Press OK button > “Phone book”
--2) ) Select “Personal phone book”>“Modify”
--3) Select “Add contact”, press OK button
--4) Use the navigation keys to select content, press OK button to set
and modify:
-Name: set the name of contact,
-NO.1-3: you can set up 3 contacts’ numbers:(Mobile、Office
Number、Other Number)
-Group: the contacts be divided into different user’s groups
www.escene.cn
Escene Communications
ES220 IP Phone
--5) Press “Save”to complete
--6) Press “Delete” to cancel your input.
Modify group
--1) Press OK button > “Phone book”
--2) Select “Personal phone book”>“Modify”
--3) Select “Modify Group”, press OK button
--4) Select the group you want to modify, press the OK button to set
and modify
--5) Press “OK” to save the change
Delete group
--1) Press OK button > “Phone book”
--2) Select “Personal phone book”>“Modify”
--3) Select “Modify Group”, press OK button
--4) Select a group you want to delete, press OK button
Find
--1) Press OK button > “Phone book”
--2) Select “Personal phone book”>“Find”
--3) input the ground name can find the ground
LDAP
--1) Press OK button> “Phone book”,
--2)Select“LDAP”, press the OK button.
--3)Select“Search name->name”, then input the name ,and press OK
or Back.
--4)Select “Search number->Number”, then input the number ,and
press OK or Back.
Pay attention: before you use LDAP function, you need to configure
LDAP rule in the web configure page.
www.escene.cn
Escene Communications
ES220 IP Phone
Using Call Logs
Your phone maintains records of your missed, placed, and received calls.
If you want to…
View your call logs
Then…
--1) Press OK button > “Call history” > “Missed Calls”, “Received
Calls”, or “Dialed numbers”
--2) Use the navigation keys to view the call record information.
--)You can delete the information, Select “Delete all”
Dial from a call log
Please refer to the previous part 4.Basic call handing – Placing a call.
Tips
• Each call log store up to 20 entries on SayHi ES220 IP phone.
www.escene.cn
Escene Communications
ES220 IP Phone
6. Keypad Instruction
SayHi series IP phones are can be configured in two ways. The first you can use the phone keypad
where you can settings for you IP phones, the other you can log in to User Options web pages
where you can settings for you IP phones.
Use phone keypad to setting. Press OK button to the main menu, Use the navigation keys to select
menu, press OK button to confirm menu selections, press C button to delete input information.
Tips
• When you want to type “.” in setting IP address with keypad, you can press * button.
SIP Account Settings
SayHi ES220 series IP phone make calls based on sip accounts, sayHi ES220 series IP phones can
support 2 independent SIP account, Each account can be configured to different SIP server.
If you want to…
Create an SIP account
Then...
--1) Select “System setting” > “Advanced setting”;
--2) Enter the password required(The default is empty) ;
--3) Select “SIP” > “Accounts SIP”;
--4) Select one of the account you want to setting, you can configure the
following parameters
-Enable account*: Select Enable
-Account mode : VOTP or PSTN, usually select VOTP
-Display Name: The name displayed on the screen
-Account*: the account matched with the SIP server.(extension
number) ,
-Authen user: the Authenticated users matched with the SIP server.
(The default With the same account)
-user pwd*: the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, By default all calls through the
server,
www.escene.hk
Escene Communication
ES220 IP Phone
-SIP2: the secondary SIP , When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
20 The default value is 3600.
-Con type :UDP or TCP, usually select UDP
-Amount of used line :the account use one line or two lines.
--5) Set up the above parameters, select “Save” to saves settings,
Complete the account creation.
* Note: the parameters with the * mark must be set.
--1) Select “System setting” > “Advanced setting”;
Disable sip account
--2) Enter the password required(The default is empty) ;
--3) Select “SIP” > “Account sip”;
--4) Select “Enable account” > “Disable”;
--5) Select “Save” to saves settings
Network Setting
If you want to …
LAN Port
Then…
--1) Select “System setting” > “Advanced setting”;
--2) Enter the password required(The default is empty) ;
--3) Select “Network>LAN Port”, you can configure the following
parameters:
-Type: static IP or DHCP or PPOE
-IP: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-Mask: enter appropriate sub mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
www.escene.hk
Escene Communication
ES220 IP Phone
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23, if you change it (for
example change it to 2003), you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
--1) Select “System setting” > “Advanced setting”;
PC Port
--2) Enter the password required(The default is empty) ;
--3) Select “Network>PC Port”, you can configure the following
parameters:
-Mode :you can select bridge or router
-4) Select “Save” to saves settings
Load default settings
If you want to...
Load default settings
Then...
--1) Choose “System settings” > “Advanced
settings”;
--2) Enter the password required(The default is
empty) ;
--3)
Select
“load
default
settings”,
and
press ”OK” then “Reboot” the phone.
Modify password
If you want to...
Modify password
Then...
--1) Choose “System settings” > “Advanced
settings”;
--2) Enter the password required(The default is
www.escene.hk
Escene Communication
ES220 IP Phone
empty) ;
--3) Select “Modify password”, you can change
the “Advanced password”.
Language setting
ES220 support multiple language to choose ,such as :Chinese 、English、Russian、French、Polish、
Spanlish、Portuguese。
If you want to…
Then…
Change the language to English
--1) Select “System setting” > “Phone setting”
> “language”;
--2)select “English ”
Change the language to other language
--1) Select “System setting” > “Phone setting”
> “language”;
--2)select which you want to display
Customizing Rings and Volume
Then…
If you want to…
Change the ring
--1) Select “System setting” > “Phone setting” > “Ring type”;
tone
--2) Press navigation to Select ring tone
Adjust the volume
--1) Select “System setting” > “Phone setting” > “Volume setting”
level
--2) You can adjust the volume level of following types
-Ring volume: Phone call ring volume,
-Handset volume: Handle output volume,
-Handset mic volume: Handle input volume,
-Speaker volume: Hands-free speaker output volume,
-Speaker mic volume: Hands-free input volume,
-Headset volume: Headphone output volume,
www.escene.hk
Escene Communication
ES220 IP Phone
-Headset mic volume: Headset microphone input volume
View status
If you want to ......
Then......
Network
You can see the network detail information of
the phone
Lines
You can see the SIP account
software
It include phone Mode、software version、kernel
version、Upgrade date、Running time
Diagnose
If you want to check the phone hardware function, press OK button > “diagnose”, you can
check the phone item as below.
If you want to ....
Then ....
Keys
You can check the phone keys
LCD
Press’OK’to start,press’C’to exit
Lights
Press’OK’to start,press’C’to exit
Sound
Press’OK’to start
www.escene.hk
Escene Communication
19
ES220 IPPhone
7. Web Settings
We can configure IP Phone more handy through web setting. Press OK button on the keypad of the
phone to enter the status page and find out the IP address of IP phone. Enter it (for example
http://192.168.0.200) into the address bar of web browser. The default login name and password
are both “root”.
Config Guide
You can finish the base configuration step-by-step by this guide.
When press “Next”, you can configure the Network parameters for the phone,
www.escene.hk
Escene Communication
20
ES220 IPPhone
After configure the network parameter, press next, then you can configure sip account for the
phone.
Press Finish, the base configuration of the phone is complete, now you can use the phone to call
with sip.
www.escene.hk
Escene Communication
21
ES220 IPPhone
Network
You can config the network parameters for the phone on the web page.
Choose network, you will find the following parameters:
Field
Description
DHCP
Config the phone get ip info from DHCP server
IP Address
Config the ip manual for phone
Netmask
Config the netmask manual for phone
Gateway
Config the gateway manual for phone
Username (pppoe)
The pppoe username
Password (pppoe)
The pppoe password
MTU (pppoe)
The mtu for pppoe,default is 1500
Primary DNS
The primary DNS server
Secondary
The secondary DNS server
MAC Address
Display the MAC of the phone
www.escene.hk
Escene Communication
22
ES220 IPPhone
HTTP Port
The default web port is 80,if you change it(for example change it to88),
You must use IP and Web port to login the web page(for example
http://192.168.0.200:88). It will take effect on next reboot.
Telnet Port
the default Telnet port is 23,if you change it(for example change it to
2003),you must use IP and Telnet port to login the manage page (for
example telnet 192.168.0.200:2003).It will take effect on next reboot.
SIP Account
The phone attempts to register to the SIP server using the account/registrar data provided by the
automatic or manual initialization.
Choose one Account, you will find the following parameters:
Field
Enable
Description
You can choose on/off to enable/disable the line.
www.escene.hk
Escene Communication
23
Account Mode
ES220 IPPhone
You can choose VOIP
Display Name
It is showed as Caller ID when making a phone call
Username
It is a username provide by SIP Server
Authenticate Name
It is authenticated ID for authentication
Password
It is a password provide by SIP Server
SIP Server
Server for registration, provided by administrator
Register Expire Time
IP phone automatically registered every time
Amount Of Line
Account Used
The line key of account used,default is 1
Audio
The IP phone supports the following voice codecs: G.722, G.711A, G.711U, G.723, and G.729A.
You can enable/disable the desired codecs via Web interface. Please contact your system
administrator for more details about the codecs.
To enable/disable the codecs:
1) 1) Choose “Audio>Tone”, you can modify “Dial Tone, Ring Volume”
www.escene.hk
Escene Communication
24
ES220 IPPhone
2) Choose “Output volume”, you can modify “Handset Volume, SpeakerPhone Volume, Headset
volume”
3)Choose “Input Volume ”,you can modify “ Handset Mic Volume, SpeakerPhone Mic Volume,
Headset Mic Volume”
4)Choose ”Voice codec” you can modify “payload Length”, normally is 20ms.
5)Choose ”Ring”, you can delete which you don’t want to use.
6)Choose “Upload Ring”, you can upload the music which you like,but upload G729 less than
30k.
7)Choose “Audio Codec”, Use the navigation keys to highlight the desired one in the
Enabled/Disable Codecs list, and press the
/
to move to the other list.
8)Choose “Submit” to save the change.
Of course, you can control the voice bulk in this choose.
PhoneBook
Group
You can add, edit and delete group in a phone book on web page of ES210.
1) Click “PhoneBook” > “Group”,
If you want to add a Group, you just ought to click ‘Add Group’ .
You can edit an existed Group by click .
You can delete an existed Group by click , if you want to delete all Groups, you just ought to
click ’Delete All Group’.
2) When you add a group or edit an existed group, you can set several parameters as follow:
Group
ID
Serial number of a group
Description
Description of a group
Group Name
Name of a group
www.escene.hk
Escene Communication
25
ES220 IPPhone
Contact
You can add, edit and delete contact in a phone book on web page of ES210.
The phonebook can storage 300 contact entry.
1) Click “PhoneBook” > “Contact”,
If you want to add a Group, you just ought to click ‘Add Contact’.
You can edit an existed Contact by click .
You can delete an existed Contact by click , if you want to delete all Contacts, you just ought
to click ’Delete All Contact’.
2) When you add a Contact or edit an existed Contact, you can set several parameters as follow:
Contact
Serial Number
Serial number of a contact
First Name
The First Name of a contact
Last Name
The Last Name of a contact
Mobile Number
The Number1 phone number of a contact
Office Number
The Number2 phone number of a contact
OtherNumber
The Number3 phone number of a contact
Group
You can assign a contact to a specific group. If there isn’t any group set
on the phone, the group is None by default.
Account
Select a SIP account relating this contact, that is you can dial to the
contact from this SIP account.
LDAP
Overview
1).
LDAP stands for Lightweight Directory Access Protocol which is a client-server protocol
for accessing a directory service. LDAP lets you locate organizations, individuals, and other
resources such as files and devices in a network, whether on the Internet or on a corporate
intranet, and whether or not you know the domain name, IP address, or geographic
whereabouts.
An LDAP directory can be distributed among many servers on a network, then replicated and
synchronized regularly.
2).
Configuration
access to the web “PhoneBook>LDAP page, you can find the configured option is like
following picture. the detail configure in the appendix.
www.escene.hk
Escene Communication
26
ES220 IPPhone
BanList
You can add, edit and delete banlist in a phone book on web page of ES220..
1) Click “PhoneBook” > “BanList”,
If you want to add a BanList, you just ought to click ‘Add BanList’.
You can edit an existed BanList by click .
You can delete an existed BanList by click , if you want to delete all BanLists, you just ought
to click ’Delete All BanList’.
2) When you add a BanList or edit an existed BanList, you can set several parameters as follow:
BanList
Serial Number
Serial number of a BanList
www.escene.hk
Escene Communication
27
ES220 IPPhone
Description
Description of a BanList
First Name
The First Name of a ban contact
Last Name
The Last Name of a ban contact
Mobile Number
The number1 phone number of a ban contact
Home Number
The number2 phone number of a ban contact
Office Number
The number3 phone number of a ban contact
Account
Select a SIP account relating this ban contact, that is the ban contact
can’t dial to this SIP account.
Enterprise Phonebook
You can download Enterprise Phonebook from this web interface. But you should do second
develop on the sip server to enable this function completely.
If the sip server no add some function to hold this option ,this option can be userd.
Advanced
Phone Setting
You can use phone setting to set the time, qos, port Mirroring for the phone.
www.escene.hk
Escene Communication
28
ES220 IPPhone
www.escene.hk
Escene Communication
29
ES220 IPPhone
When used Phone Setting option, you can set several parameters as follow:
Phone Setting
DTMF
The DTMF transmitted mode,include RFC 2833,Inband,SIP Info
BackLight
The backlight of the phone LCD
Set Time Mode
The mode of set time for phone,include SNTP/SIP Server/Manual
Daylight
Time
Enable/disable the DST for the phone
Saving
Time Format
You can use 24 hour time format or 12 hour time format
Time Zone-GMT
You can select different time zone for the phone
Manual Setting
This used to manual set time for the phone
QoS
The qos priority,support diff-serv and precedence
Network
Mirroring
Packet
When select on,then you can capture the phone’s packet use notebook
which connect to pc port of the phone
VLAN Setting
You can add the phone and PC to different VLAN used VLAN Setting option.
When used VLAN Setting option,you can set several parameters as follow:
VLAN Setting
Enable VLAN
You can enable/disable vlan for phone and pc
VID
The vlan you want the phone or pc to join
www.escene.hk
Escene Communication
30
ES220 IPPhone
VPN Setting
IF you need to setup a VPN Setting, you should fill below options.
When used VPN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VPN
You can enable/disable VPN for phone and pc
VPN Type:
L2TP or SSL_VPN
VPN Server Addr
VPN server's ip
VPN User Name
VPN user's name
VPN password
A password be use for authentication
SSL_VPN
Upload VPN config
Dial Plan setting
If you want to setup a dial plan, you can click "Dial Plan".
www.escene.hk
Escene Communication
31
ES220 IPPhone
Click "add rule" to entry this interface.
Dial Plan Setting
ID
Dial Plan ID
IP
The ip of a phone which you want to call
prefix
The number which you need to press actually if you want to call the
phone
Called
Number
Insert
There have two option, Enable or Disable.
Position
Which position you want insert the number
Number
Waht number you want to insert
Called
Number
Delete
There have two option, Enable or Disable.
Tips
(Note: When you want to add code and delete at the same time, you can add code first, after that
base on the number you add, decide the position and length of the delete code.)
www.escene.hk
Escene Communication
32
ES220 IPPhone
Global SIP
You also can setup the SIP server on Global SIP. If you set SIP server in global SIP ,then you don’t
need to set SIP server in account SIP.
Phone Maintenance
Log
If you need to catch a debuging Level log, you need setup on this interface.
www.escene.hk
Escene Communication
33
ES220 IPPhone
You can change the password used to login phone GUI in Password option.
In Password option, you can set several parameters as follow:
Password
Username
The login username of the web page
Old Password
The old password used to login of the web page
New Password
The new password used to login of the web page
Confirm Password
The new password used to login of the web page
Administrator
Login phone web page used administrator privileged
User
Login phone web page used general user privileged
Default Setting
You can load the phone to the factory default setting in default setting option.
www.escene.hk
Escene Communication
34
ES220 IPPhone
Press the ‘Reset to Factory Setting’ option,the phone will load to factory default setting on next
reboot.
Auto Provision
When you open the auto provision function, the phone will auto provision if the phone detect a
higher sofrwre or kernel which are put on the software server. The detail information about auto
provision you can see the appendix.
www.escene.hk
Escene Communication
35
ES220 IPPhone
When use auto provision, you can set several parameters as follow:
Auto Provision
Auto Provision
You can enable/disable auto provision by select on/off
Protocol
The protocol use for auto provision,it include tftp/http/ftp
Software
URL
Server
The server address of the auto provision
Username
The username provide by provision server
Password
The password provide by provision server
Auto
Download
Software
This used to auto download software from server
Auto
Kernel
This used to auto download kernel from server
Download
Auto
Download
Config File
This used to auto download config file from server
Broadsoft
Compatiblity
This used to compatible the broadsoft format’s config file
Auto
Download
Expension
This used to auto download expansion’s config from server
Auto
Download
Enterprise
Phonebook
This used to auto download enterprise phone from server
Auto
Download
Personal Phonebook
This used to auto download personal phonebook from server
Booting Checked
This used to checked the auto provision when phone booting
Auto
Provision
Freqency
This used to set the time interval for auto provision
Auto Provision Time
This used to the specific time for auto provision
AES Enable
You can enable/disable AES encrypt for auto provision
AES Key
The key of the AES
Auto Provision Now
This used to do auto provision immediately
FTP Upgrade
You can upgrade the software,kernel and configure file for the phone use ftp.
www.escene.hk
Escene Communication
36
ES220 IPPhone
When use ftp upgrade, you can set several parameters as follow:
FTP Upgrade
Server IP
The ip address of the ftp server
Filename
The name of the file want to download from ftp server
Username
The username provide by ftp server
Password
The password provide by ftp server
Software Upgrade
Used to upgrade the software of the phone
Kernel Upgrade
Used to upgrade the kernel of the phone
Configuration
You can used update/backup to update/backup the configure file of the
phone
Phone Book
You can used update/backup to update/backup the phonebook of the
phone
EXT Module
You can used update/backup to update/backup the expansion of the
phone
TFTP Upgrade
You can upgrade the software,kernel and configure file for the phone use tftp.
www.escene.hk
Escene Communication
37
ES220 IPPhone
When use tftp upgrade, you can set several parameters as follow:
TFTP Upgrade
Server IP
The ip address of the tftp server
Filename
The name of the file want to download from ftp server
Software Upgrade
Used to upgrade the software of the phone
Kernel Upgrade
Used to upgrade the kernel of the phone
Configuration
You can used update/backup to update/backup the configure file of the
phone
Phone Book
You can used update/backup to update/backup the phonebook of the
phone
EXT Module
You can used update/backup to update/backup the expansion of the
phone
HTTP Upgrade
You can upgrade the software, kernel and configure file for the phone use http.
www.escene.hk
Escene Communication
38
ES220 IPPhone
When use http upgrade, you can set several parameters as follow:
HTTP Upgrade
Select a File
Browse the software/kernel/config file you want to upgrade from http
Software Upgrade
Used to upgrade the software of the phone
Kernel Upgrade
Used to upgrade the kernel of the phone
Configuration
You can used upload/download to upload/download the configure file
of the phone
Phone Book
You can used upload/download to upload/download the phonebook of
the phone
*EXT Module
You can used update/backup to update/backup the expansion of the
phone
* means it has not this function now.
Reboot
You can use reboot option to reboot the phone.
www.escene.hk
Escene Communication
39
ES220 IPPhone
When you press ‘Reboot’,the phone will reboot.
Phone Status
You can see the currently status of the phone when use Phone Status option.
www.escene.hk
Escene Communication
40
ES220 IPPhone
System Info
You can see the system information when used System Info option.
Attention:
On this interface ,you can see the software and kernel which we used for test and this user_manual
is written base on this software and kernel.
This software version is V1.0.2.9-777
This kernel version is v2.5.9
About
You can see the phone model when used About option.
www.escene.hk
Escene Communication
41
ES220 IPPhone
www.escene.hk
Escene Communication
42
ES220 IPPhone
Appendix:
Auto Provision
Pre-configuration on TFTP/HTTP/HTTPS/FTP Server
When the software or kernel auto-provision is enabled and want to run, IP Phone will
check the software and kernel version at first, so we need make some
pre-configuration on the provisioning server.
Auto Provision for Software:
1. Create a notepad file named“F000X00.cfg”(the “X” is decided by the model of
the IP phone you are using, for example, if the model is ES620, the file name is
“F000600.cfg”);
*Named rule of the file:
F00600.cfg: for ES620, ES610 and DS622;
F00400.cfg: for ES410 and DS412;
F00300.cfg: for ES310 and DS312;
F00200.cfg: for ES210 and DS212.
2. Open the notepad file “F000X00.cfg” and write the new software name in it, for
example,
S_ES6xx_version2.0.4.6: for ES620, ES610 and DS622;
S_ES410_version2.0.4.6: for ES410 and DS412;
S_ES310_version2.0.4.6: for ES310 and DS312;
S_ES210_version2.0.4.6: for ES210 and DS212
Write down the new version you want to upgrade and save it on your
provisioning server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your software would be not available.
3. After it, upload the new software to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Auto Provision for Kernel:
1. Create a notepad file named“K000X00.cfg”(the “X” is decided by the model of
the IP phone you are using, for example, if the model is ES620, the file name is
“K000600.cfg”);
*Named rule of the file:
K00600.cfg: for ES620, ES610 and DS622;
K00400.cfg: for ES410 and DS412;
K00300.cfg: for ES310 and DS312;
K00200.cfg: for ES210 and DS212.
2. Open the notepad file “K000X00.cfg” and write the new kernel name in it, for
example,
K_uImage_600.bin_version2.1.6: for ES620, ES610 and DS622;
K_uImage_400.bin_version2.1.6: for ES410 and DS412;
www.escene.hk
Escene Communication
43
ES220 IPPhone
K_uImage_300.bin_version2.1.6: for ES310 and DS312;
K_uImage_200.bin_version2.1.6: for ES210 and DS212
Write the new version you want to upgrade and save it on your provisioning
server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your kernel would be not available.
3. After it, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Configuration files on TFTP/HTTP/HTTPS/FTP Server
Name of configuration file:
The configuration file on the provisioning server is named as the MAC address of IP
phone itself. Escene’s IP phones support two different configuration files for
auto-provision:
1. Normal Configuration file:
Normal Configuration file is the configuration file of your Escene IP phone. You can
download it from your phone (You can see the following chapter to see how to
download a configuration file from Escene IP hone) and modify by yourself. If the IP
phone’s MAC address is 00:11:22:33:44:55, the normal configuration file of it should
be 001122334455.xml.
l
2. Broadsoft Configuration files:
Broadsoft Configuration files support the format of Broadsoft IP-PBX. However, you
can use them for provisioning. There are two files should be set on your provisioning
server, they are also named by the MAC address of your phone
1) 001122334455.cfg: a configuration file for system settings, for example,
network, audio and so on.
2) 001122334455.txt: a configuration file for SIP accounts.
Download a configuration file from your phone:
You can download a configuration file from your phone by HTTP as follow:
1. Open the web page of your IP phone, click “Phone Maintenance”>“HTTP
Upgrade”;
2. Then click “Download” of Configuration:
l
www.escene.hk
Escene Communication
44
ES220 IPPhone
3. If you want to use this file to auto-provision, you just need to modify it by
yourself and rename it to the MAC address of your IP Phone with .xml suffix.
Extern.xml file on TFTP/HTTP/HTTPS/FTP Server
The Extern.xml includes the settings of programmable buttons on the phone and all
Expansion Modules. All the phones can download the settings from a same file and
they will have the same settings (for example, Speed-dial, BLF and so on).
*You can’t rename the file on the provisioning server. The file name is fixed to
Account1_Extern.xml.(Account1 is the first account you register)
Phonebook on TFTP/HTTP/HTTPS/FTP Server
Escene IP phone supports Enterprise Phonebook and Personal Phonebook.
l
Enterprise Phonebook:
Enterprise Phonebook is used for all staffs in your office. All phones will download a
common phonebook for all staffs. The file’s name must be
Enterprise_Phonebook.xml on your provisioning server and you can not rename it.
l
Personal Phonebook:
Personal Phonebook is individual for each IP phone. The file on your provisioning
server is named by the first account of your IP phone. If the IP phone’s first account is
1287, the Personal Phonebook of this phone is 1287_Phonebook.xml.
Automatic Provisioning using DHCP Option 66
The following steps will descript auto-provision by TFTP. You also can use HTTP
and FTP for auto-provision with our phones.
DHCP Server: (Microsoft Windows 2003 server)
www.escene.hk
Escene Communication
45
ES220 IPPhone
Start up the “DHCP Management Console”;
Expand the DHCP scope which will contain the phones
Right-click on the “Scope Options” node
Select “Configure Options”
In the “General” tab, scroll down the list of options and identify the option
labeled “066 Boot Server Host Name”
6. Enable the “066 Boot Server Host Name” and enter the string value according to
the examples discussed previously
string value:
192.168.0.201(TFTP Server IP Address);
7. Click the “OK” button
1.
2.
3.
4.
5.
IP Phone:
1. Input the IP Phone’s IP Address in browser;
2. Enter user and password with “root” then open the web page;
3. Click “Phone Maintenance” and select “Auto Provision”;
4. Select like as follows:
5. Click “Submit” to save it.
Auto-Provision via fixable TFTP/HTTP/HTTPS/FTP Server
IP Phone:
1. Input the IP Phone’s IP Address in browser;
2. Enter user and password with “root” then open the web page;
3. Click “Phone Maintenance” and select “Auto Provision”;
4. select like as follows:
www.escene.hk
Escene Communication
46
ES220 IPPhone
It supports three protocols in Auto-Provision:TFTP,HTTP and FTP.
The format with provisioning server URL is:
TFTP:
TFTP://192.168.0.201(192.168.0.201 is the default Server IP address)
HTTP:
HTTP://192.168.0.201
HTTPS:
HTTPS://192.168.0.201
FTP:
FTP://192.168.0.201
Username: the user to login FTP/HTTP/HTTPS server
Password: the password of the user using to login FTP/HTTP/HTTPS server
*Username and password are available in FTP/HTTP/HTTPS only (unavailable in
TFTP).
www.escene.hk
Escene Communication
47
ES220 IPPhone
Auto Download Software:
Download software from server and upgrade it automatically.
Auto Download Kernel:
Download kernel from server and upgrade it automatically.
Auto Download Config File:
Download configuration file from server and update it automatically.
BroadsoftCompatibility:
If you select this function, you need to put two configuration files (with
Broadsoft format) on the provisioning server. Otherwise, you can download the
configuration file from your phone via HTTP (regarding the steps, you can refer to
“Download a configuration file from your phone” in this document.), modify it
and upload it to the server for auto-provision.
Auto Download Expansion:
Download configuration file of the Programmable buttons on your phone or
Expansion Modules automatically.
Auto Download Enterprise Phonebook:
Download Enterprise Phonebook from server and update it automatically.
Auto Download Personal Phonebook:
Download Personal Phonebook from server and update it automatically.
Booting Checked:
Check all items you had selected and upgrade/update them when the phone boot
Auto Provision Frequency:
The auto provision Frequency which you want.
Auto Provision Time:
The time you want to execute auto-provision.
Examples of Auto Provision Frequency and Time
1) When you set the Auto Provision Frequency and disableAuto Provision Time
(set to None), the Auto Provision function will work after the AutoProvision
Frequency;
2) When you set both Auto Provision Frequency and Auto Provision Time, for
example:
You set the AutoProvision Frequency to 24 hours, and the Auto Provision
Time to 2:00 at 8:00 today (1, Jan), it will pass 24 hours at first and work at the
nearest 2:00, it means that the Auto Provision function will work at 2:00 on the
day after tomorrow (3, Jan).
Therefore, if you want this function work at 23:00 tonight and it is 8:00 now, you
need to set the Auto Provision Frequency to 0 hours and the Auto Provision
Time to 23:00.
AES Encryption:
AES encryption is used for all the setting files of your phone (include configuration file,
Expansion file, Enterprise/Personal Phonebook etc. You just need to enable the AES Encryption
www.escene.hk
Escene Communication
48
ES220 IPPhone
function and input the AES Key matching the one on your server on.
1. Overview
LDAP stands for Lightweight Directory Access Protocol which is a client-server protocol
for accessing a directory service. LDAP lets you locate organizations, individuals, and other
resources such as files and devices in a network, whether on the Internet or on a corporate
intranet, and whether or not you know the domain name, IP address, or geographic
whereabouts.
An LDAP directory can be distributed among many servers on a network, then replicated and
synchronized regularly.
2. Configuration
Please note that LDAP Phonebook support on ES620\ES410\ES330\ES320\ES310\ES210, the
version must be V2.2.3.1-2210 and higher, then access to the web UI¢ PhoneBook¢ LDAP
page, you can find the configured option is like following picture.
www.escene.hk
Escene Communication
49
ES220 IPPhone
We introduce each parameter attributes in following section.
3. Attributes
3.1Common Attributes
Abbrevation
cn
company
gn
homePhone
mobile
o
ou
pager
sn
-
Name
commonName
company
Description
Full name of the user.
Company or organization
name
givenName
Firstname
also
called
Christian name
homeTelephoneNumber Home Phone number
mobileTelephoneNumber Mobile or cellular phone
number
organizationName
Organization name or even
organizational name
organizationalUnitName Usually department or any
sub entity of larger entity
pagerTelephoneNumber Pager telephone number
surname
Surname,last
name
or
family name
telephoneNumber
Office phone number
3.2Attributes on Escene Configured Page
3.2.1 LDAP Name Filter
Description: LDAP name filter is the search criteria for name look ups. The format of the
search filter is compliant to
the standard string representations of LDAP search filters (RFC 2254). The name prefix
for search entered by the user
is represented by the “%” symbol in the filter.
Valid Values: Standard LDAP filters e.g. (&(sn=%)(telephoneNumber=%s))
Default Value: <blank>
Examples:
¢ (&(telephoneNumber=%s)(sn=%))
Returns all LDAP records which have the “telephoneNumber” field set and
the “sn” field starts with the entered prefix.
¢ (|(cn=%s)(sn=%s))
Returns all LDAP records which have the “cn” or “sn” field starting with the entered
prefix.
www.escene.hk
Escene Communication
50
ES220 IPPhone
¢ (!(cn=%s))
Returns all LDAP records which “do not” have the “cn” field starting with the entered
prefix.
3.2.2 LDAP Number Filter
Description: LDAP number filter is the search criteria for number look ups. The format of
the search filter is compliant to the standard string representations of LDAP search filters
(RFC 2254). The number prefix for search entered by the user is represented by the “%”
symbol in the filter.
Valid Values: Standard LDAP filters e.g.
(|(telephoneNumber=%s)(Mobile=%s)(ipPhone=%s))
Default Value: <blank>
Examples:
¢ (|(telephoneNumber=%s)(Mobile=%s)(ipPhone=%s))
Returns all LDAP records which have the “telephoneNumber” or “Mobile” or
“ipPhone”field starting with the entered prefix.
¢ (&(telephoneNumber=%s)(sn=*))
Returns all LDAP records which have the “sn” field set and the
“telephoneNumber” field starts with the entered prefix.
3.2.3
Server Address
Description: This setting refers to the DNS name or IP address of the LDAP server.
Default Value: 0.0.0.0
Example:
¢ 192.168.1.100
¢ ldap.company.com
3.2.4
Port
Description: This setting specifies the LDAP server port.
Default Value: 389
3.2.5
Base
Description: This setting specifies the LDAP search base (the distinguished name of
the search base object) which corresponds to the location in the directory from
which the LDAP search is requested to begin. The search base narrows
the search scope and decreases directory lookup time. If you have
multiple organizational units in your directory (for example, OU=Sales in
O=COMPANY and OU=Development in O=COMPANY), but the "OU=Sales"
organization never uses AOL AIM, you can restrict the lookup to the
www.escene.hk
Escene Communication
51
ES220 IPPhone
OU=Development subtree only by entering providing the following search base:
OU=Development, O=COMPANY. Other examples see below.
Default Value: <blank>
Examples:
¢ o=UNIVERSITY OF NEW ORLEANS,c=US
¢ o=SFU,c=CA
¢ dc=escene,dc=cn
3.2.6
User Name
Description: This setting specifies the bind “Username” for LDAP servers.
Most LDAP servers allow anonymous binds in which case the setting can be left
blank. However if the LDAP server does not allow anonymous binds, you will need to
provide the Username and Password allowed to query the LDAP server.
Default Value: <blank>
3.2.7 Password
Description: This setting specifies the bind “Password” for LDAP servers. Escene
phones use “simple” authentication scheme for bind requests. This setting can be left
blank in case the server allows anonymous binds. Otherwise you will need to provide
the Password along with the Username in order to access the LDAP server.
Default Value: <blank>
3.2.8 Max.Hits(1~32000)
Description:
This
setting
specifies
the
maximum
number
of
search
results to be returned by the LDAP server. If Max.hits is 0 or blank the
LDAP server will return all search results. Please note that a very large value of the
“Max. Hits”
should
be
will
slow
configured
down
the
according
LDAP
to
the
lookup,
therefore
the
setting
available bandwidth. The default
value for this setting is blank.
Default Value: 50
3.2.9 LDAP Name Attributes
Description: This setting can be used to specify the “name” attributes of each record
which are to be returned in the LDAP search results. This setting compresses the
search results, as the server only returns the attributes which are requested
by the Escene phone. The setting allows the user to configure multiple
space
separated
name
attributes. Please consult your system administrator
www.escene.hk
Escene Communication
52
ES220 IPPhone
regarding which name attributes are to be configured.
Valid Values: Space separated name attributes, see examples below.
Default Value: <blank>
Examples:
¢ cn sn displayName
Requires “cn”, “sn” and “displayName” fields for each LDAP record.
¢ givenName
Requires “givenName” field for each LDAP record.
¢ vorName nachName
Requires “vorName” and “nachName” fields for each LDAP record.
3.2.10
LDAP Number Attributes
Description: This setting can be used to specify the “number” attributes of each
record which are to be returned in the LDAP search results by the LDAP server.
This setting compresses the search results, as the server only returns the attributes
which are requested. The user can configure multiple space separated number
attributes by using this setting. Please consult you system administrator regarding
which number attributes are to be configured.
Valid Values: space separated number attributes e.g. telephoneNumber Mobile ipPhone
Home
Default Value: <blank>
Examples:
¢ Mobile telephoneNumber ipPhone
Requires “Mobile”, “telephoneNumber” and “ipPhone” fields for each LDAP record.
¢ Home Private Office
Requires “Home”, “Private” and “Office” fields for each LDAP record.
3.2.11
Protocol
Description: Protocol is the protocol version for the phone when send the bind request to
the server. Please make sure your LDAP server support version 3/2 bind request.
Valid Values: version 3/version 2
Default Value: version 3
3.2.12
Search Delay(ms)(0~2000)
Description: This setting is for configuring the delay display time after search.
Valid Values: 0~2000
Default Value: 0
www.escene.hk
Escene Communication
53
ES220 IPPhone
3.2.13
LDAP Lookup for Incoming Call
Description: This setting can be used to enable calling line identification
using LDAP. When the setting is turned
“Enable”, the phone performs an LDAP number search for the incoming number and
displays the name of the calling party accordingly.
Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
LDAP Sorting Results
3.2.14
Description: This setting is for sorting the search results, if make this option “Enabled”,
it will arrange in the first alphabetical of the name order if return the name display; if
only has the number return, it will list in numerical order. Valid Values: <Enabled>,
<Disabled>
Default Value: Disabled
3.2.15
LDAP Lookup for PreDial/Dial
Description: This setting can be used to enable call out line identification using LDAP.
When the setting is turned
“Enabled”, the phone performs an LDAP number search for PreDial or Dial status.
Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
3.3 Example for Configuration
You can use the below settings as a starting point and adjust the filter and display attributes
according to your needs.
LDAP Name Filter: (&(telephoneNumber=%s)(sn=%))
LDAP Number Filter: (&(telephoneNumber=%s)(sn=*))
Server Address: 192.168.200.254
#####this setting is relate with the server configuration.
Port: 389
#####this setting is relate with the server configuration.
Base: dc=Escene,dc=cn
#####this setting is relate with the server configuration.
User Name: cn=manager,dc=escene,dc=cn
#####this setting is relate with the server
configuration.
Password: *****
#####this setting is relate with the server configuration.
Max.Hits: 50
LDAP Name Attributes: cn sn displayName
LDAP Number Attributes: Mobile telephoneNumber ipPhone
www.escene.hk
Escene Communication
54
ES220 IPPhone
Protocol: Version 3
#####this setting is relate with the server configuration.
Search Delay(ms)(0~2000): 0
LDAP Lookup for Incoming Call: Enabled
LDAP Sorting Results: Enabled
LDAP Lookup for PreDial/Dial: Enabled
4. Configuration on Escene Phone
5. LDAP Server Installation
5.1Install OpenLDAP Server on Windows 2003 System
Install “openldap-2.2.29-db-4.3.29-openssl-0.9.8a-win32_Setup.exe” according to
default prompt,please remember the install path for next steps.
1. Double click the install program to run the installation.
www.escene.hk
Escene Communication
55
ES220 IPPhone
2. Please remember the install path. E.g. C:\Program Files\OpenLDAP.
www.escene.hk
Escene Communication
56
ES220 IPPhone
3. Choose the [Full installation] mode as picture.
www.escene.hk
Escene Communication
57
ES220 IPPhone
www.escene.hk
Escene Communication
58
ES220 IPPhone
5.2Configure OpenLDAP Server
5.2.1
Configure slapd.conf file
1. Add “schema” in slapd.conf file
Access to the install path (for example,C:\Program Files\OpenLDAP),open
the file names slapd.conf,find the command
include
./schema/core.schema
Add the other commands like:
include
./schema/cosine.schema
include
./schema/inetorgperson.schema
include
./schema/corba.schema
include
./schema/dyngroup.schema
include
./schema/java.schema
include
./schema/misc.schema
include
./schema/nis.schema
include
./schema/openldap.schema
2. Modify the LDAP directory node
Access to the install path,open the file names slapd.conf,find the command
suffix
“dc=my-domain,dc=com”
rootdn
“cn=Manager,dc=my-domain,dc=com”
Please modify these two commands to following commands (please do not
have any space during the quotation marks “”):
suffix
“dc=escene,dc=cn”
rootdn
“cn=Manager,dc=escene,dc=cn”
www.escene.hk
Escene Communication
59
ES220 IPPhone
3. Modify the LDAP password
Access to the install path,open the file names slapd.conf,find the command
rootpw
secret
Please modify it to the password you want to set.
rootpw
escene
5.2.2
Run slapd server
Cmd to OpenLDAP’s install path,for example,”cd
Files\OpenLDAP” , then run the command “slapd –d 1”
c:\Program
If run the server successfully,you can find the command of “slapd starting”
NOTE:
Please do not close this window to make sure the LDAP Server keep running.
5.2.3
Add contact
Create a plain text named “escene.ldif” in install path.
Then put the content like following:
dn:
objectClass:
objectClass:
dc:
dc=escene,dc=cn
dcObject
organization
escene
www.escene.hk
Escene Communication
60
ES220 IPPhone
o:
dn:
objectClass:
cn:
description:
Escene Organization
cn=Manager,dc=escene,dc=cn
organizationalRole
Manager
Escene Address Book Administrator
Cmd to execute command “ldapadd
–W –f escene.ldif”.
-xv –D “cn=Manager,dc=escene,dc=cn”
Input the password you set,here is escene.
www.escene.hk
Escene Communication
61
6.
ES220 IPPhone
Install LDAP Client tool in Windows System
6.1 Install LDAPExploreTool2
Install the LDAPExploreTool2 according to the prompt.
6.2 Create the Configurations in LDAPExploreTool2
1. Run the LDAPExploreTool2,access to File→Configurations.
2. Create the New Configuration
a. Fill in a name in Configuration option
www.escene.hk
Escene Communication
62
ES220 IPPhone
b. Input the server address on Server option.
www.escene.hk
Escene Communication
63
ES220 IPPhone
c. Press Test connection,the password is blank(no password),press ok,will
display Test OK.
NOTE:
Server name or IP\Server port\Version settings are relate with the settings on
escene phone.
d. Configure the “cn=Manager,dc=escene,dc=cn” on User DN,and tick the
Store password for protect your settings,enter the password which you
configure on the server.
www.escene.hk
Escene Communication
64
ES220 IPPhone
The Base DN will auto-configure if you press the [Guess value].
After the settings above,you can press [Test connection] to test your settings,if it
prompt warning message,please re-try the steps above again,we can continue the next
steps if the test is passed.
3. Choose the Action[LDAP],then press [Open] achieve the settings.
Then you can get the page like following picture. Please right click the
www.escene.hk
Escene Communication
65
ES220 IPPhone
action to add the contacts.
6.3 Add the Entry
1.Please right click the action to add the contacts.
2.Create new entry.
Parent DN: This setting will automatic generation according the Configuration
setting.
Entry RDN: The format is cn=XXX
Object Class(from schema): Select the structure class which entry belongs to,
each structure class has its own must attributes and may attributes. We select
[Person] for example here.
Must attributes: Double click attribute to add them to the entry node. If need
multi-cn, can be allow to repeat added.
May attributes: Double click attribute to add them to the entry node. If need
multi-Telphonenumber, can be allow to repeat added.
www.escene.hk
Escene Communication
66
ES220 IPPhone
Please notice the note label on the picture above.
After save the settings, you can find the new added entry at the left of the LDAP
catalogue.
3.You can add more contact entries by these steps.
www.escene.hk
Escene Communication
67
ES220 IPPhone
----------------------------------------------------------------------------------------------------------------------
Escene Communication Co.,Ltd
Address: Floor 4,Building C,Yuean Industrial Park,Huangcun Road No.51,Tianhe
District,Guangzhou,China.
Postal Code: 510660
Tel: (+86)20-28096798
Fax: (+86)20-28096786
http://www.escene.hk
Technical Support:
E-mail: [email protected]
www.escene.hk
Escene Communication
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement