Technical Documentation Pipe Packages , DE Wilmington

Technical Documentation Pipe Packages , DE Wilmington
Belimo Project: New Castle County Courthouse, Wilmington, DE
Technical Documentation
Pipe Packages
Effective June 2009
Pipe Packages
Pipe Package provides reliability,
fast delivery and ease of installation.
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
TYPICAL TERMINAL INSTALLATIONS
VAV Coils
Fan Coils
Radiant Panels
Unit Ventilator
Cabinet Unit Heater
Heat Pumps
Reheat Coils
Air Handlers
Duct Coils
Fin Tubes
Convectors
PIPE PACKAGE – REDUCE TIME, MONEY AND COST
Belimo has developed pipe packages that incorporate its actuator and
valve product lines. This union greatly simplifies the contractor’s job
by eliminating piping connectors, thus saving time and money with
less opportunity for error.
• 5-year warranty on CCV and PICCV packages
• One point of ordering provides reliable solutions
with 100% tested and fast delivery
• Eliminates numerous piping connections
saving time and money.
FEATURES
The Belimo Pipe Package is a systematic way of piping HVAC terminal units that reduces the time, space and cost required to make the connection
from the distribution piping in the building to the coil. To effectively accomplish this, Belimo is offering combination valves and unions created to
interface with an HVAC terminal unit.
One stop shopping offering reliability and a longer service life Belimo offers the valve, actuator and all components assembled and tested. The pipe
package is designed to have valve isolation. This allows for the removal of the valve without having to drain the entire system. With a 5-year warranty
on all PICCV and CCV packages and a 2-year warranty on Zone valve packages, Belimo matches the warranty of the piping package to the warranty of
the valve.
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
1
Feature / Benefits
Pipe Packages
The Conventional Way
18 Pieces, 22 Connections
10 minutes/connection x 22 connections
220/60 minutes= 3.66 hours
3.66 hours x $20 an hour= Labor Cost of $73
RETURN
The Belimo Way
AB
2 Pieces, 4 Connections
10 minutes/connection x 4 connections
40/60 minutes= 0.667 hours
0.667 hours x $20 an hour= Labor Cost of $13.34
SUPPLY
Standard pipe packages
Frequently Asked Questions
PICCV, CCV and Zone standard packages
are available in ½”, ¾” and 1” sizes
What sizes are available?
Custom packages
 PICCV and CCV are available in
½”, ¾”, 1”, 1¼”, 1½” and 2” sizes
 Press fittings are available in
½” to 2” sizes
Standard sizes: ½”, ¾” and 1”
(Zone is available in 2-way only)
Is there any other information needed
when placing a pipe package order?
Yes, the following information is needed.
Custom sizes: 1¼”, 1½” and 2”
(Zone not available).
 Type of control valve
Are the packages tested?
 Run-out pipe connection size
(supply and return)
 The Union, Isolation Valve and
Strainer are available without a
PT port
Yes, every package is 100% factory
tested in Danbury, CT.
 Unique versions are possible,
call Belimo to speak to a
factory expert for available
options
Is there a warranty?
Yes, the PICCV and CCV packages have a
5-year warranty and the Zone packages
have a 2-year warranty.
Are hoses available?
Yes, they are separate from the packages
and come in ½”, ¾” and 1” diameter with
12” and 24” lengths.
 Control valve size
 Run-out pipe connection type:
male NPT iron pipe or copper sweat
 Coil connection size
 Coil connection type: male NPT
female NPT or copper sweat
 Tagging information (i.e. location)
 Hose length (hose is optional)
What is the pressure rating?
The rating is 400 psi. Just about all
applications are below 100 psi.
800-543-9038 USA
2
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
A
Ease of use and reduce time
with Belimo pipe package software.
Pipe Package Configuration Software
Isolation
Valve
Manual
Balance Valve
Strainer
COIL
Union
Hoses
The Belimo pipe package design configuration software allows
you to select components, generate customized valves package
details, schedules and submittals for systems using Belimo:
Create a New Package Configuration
Create a New Product
Open an Existing Project
Edit Company Info
View Contacts List
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
Increase efficiency
through online selection
Belimo pipe package selection software
offers customers a user-friendly software
solution that provides prices and quotes,
as well as prepares orders and submittals.
This saves time and increases the
efficiency of selecting and ordering pipe
packages. In addition, the Belimo pipe
package selection software allows
customers to select all available valve
combinations easily and maintains data
history for each project. Save and edit
existing packages to form a new version
with a click of a mouse. It is fast and easy
to select products that provide reliability
and quick delivery.
PICCV
CCV
Pressure Independent
Characterized Control Valves
Characterized
Control Valves
Zone
Control Valves


















Fill in the necessary information:
 Select control valve
(PICCV, CCV or Zone).
 Select control valve model.
 Select actuator model.
 Enter flow rate, GPM.
 Need pressure/temperature readout port?
 Select runout pipe size.
 Need hoses? 12 or 24 inch? (optional)
 Select coil pipe size.
The software will supply a reorder number.
That is it!
 Need for a strainer?
Software is available for download at www.belimo.us
Note: Control valve and actuator need to be ordered separately.
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
3
This page
intentionally left blank.
Pipe Package Nomenclature
P2
111
1213
1211
2
Hose**
Pipe Package
P = Pipe Package
Union
Valve Type
Valve Size
P = PICCV
2 = 2-way CCV
3 = 3-way CCV
Z = Zone
1 = ½”
2 = ¾”
3 = 1”
4 = 1” to ¾”
5 = ¾” to ½””
Isolation Valve/ ◆
Manual Balance Valve
Strainer
Valve Size
0 = No Strainer
1 = ½”
2 = ¾”
3 = 1”
4 = 1” to ¾”
5 = ¾” to ½”
1 = ½”
2 = ¾”
3 = 1”
4 = 1” to ¾”
5 = ¾” to ½”
Body End*
1 = Female NPT
2 = Copper Sweat
3 = Male NPT
0 = No Strainer
1 = Female NPT
2 = Copper Sweat
1 = Female NPT
2 = Copper Sweat
Configuration
1= Standard
Tailpiece End
Male NPT
Male NPT
Male NPT
1 = Standard
Configuration
Tailpiece End
0 = No Strainer
1 = Standard
Male NPT
Male NPT
Tailpiece End*
Flow Rate
+This setting is used for Isolation valves only.
Isolation Valves are used for PICCV versions only. Manual
Balance Valves are used for CCV and Zone valves
versions only.
*Union body end needs to be Female NPT if
ordering hoses. Strainer tailpiece end needs to
be Female NPT if ordering hoses.
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
0 = No Strainer
1 = Female NPT
2 = Copper Sweat
3 = Male NPT
0 = No Setting+
1 = 1.75 GPM
2 = 3.50 GPM
3 = 9.00 GPM
4 = 10.00 GPM
5 = 20.00 GPM
Only standard sizes are shown. Consult
factory for sizes 1¼” to 2”.
Valve Size
Body End
Body End
Configuration
Size & Length
0 = No Hose
1 = ½” (12” length)
2 = ½” (24” length)
3 = ¾” (12” length)
4 = ¾” (24” length)
5 = 1” (12” length)
6 = 1” (24” length)
◆ Isolation Bypass Valve for
3 way CCV is automatically
included in the reorder number.
ORDERING EXAMPLE: 2-WAY CCV
1
Choose Belimo valve type.
2
P2
111
1213
Specify Union.
1211
4
Set-Up
Valve Size
1 = ½”
Body End
1 = Female NPT
Configuration
1 = Standard
3
Specify Strainer.
Specify Manual Balance Valve.
Valve Size
1 = ½”
Valve Size
1 = ½”
Body Size
2 = Copper
Sweat
Body End
2 = Copper Sweat
Configuration
1 = Standard
Flow Rate
3 = 3.50 GPM
7
Complete Ordering Example:
2
Configuration
1 = Standard
Tailpiece End
1 = Female NPT
P2 111 1213 1211 2*
5
Does order
require hoses?**
Size and Length
2 = ½” & 24” Long
6
Does order
require
tagging? Tagging:
Valves may be
tagged per customer
specification, free of
charge.
Example:
AHU-1
FCU-2
* Pipe package only. Does not include Belimo valve and actuator.
** Hoses are optional.
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
5
Featured Components
Pipe Package



 

Union combines the features of a dielectric union, reducer, multiple fittings, and PT
(Pressure/Temperature) readout ports into a single part.
 ¼” PT readout port
 Forged brass body available in male NPT, female NPT and copper sweat
 Glass reinforced with low dielectric insulator
 Line and one size reduction available with male NPT in standard offering



 































Manual Balance Valve for CCV and Zone valves is a combination of an isolation
valve, union, manual air vent, PT readout port and a high signal, low loss
removable venturi. Eliminates up to 8 piping connections.
 Manual air vent
 Forged brass body available in female NPT and copper sweat
 Forged brass memory stop with arc indicator pad
 Triple seal, blow out proof stem with 2 Viton® O-rings and Teflon® packing
 Line and one size reduction available with male NPT
 (2) ¼” PT readout ports
Strainer is a combination of an isolation valve, a 20 mesh stainless steel screen,
union and a PT port into a single part. Eliminates up to 8 piping connections.
 Standard ¼” accessory tapping
 Forged brass body, chrome plated ball available in female NPT and copper
sweat
 Solid brass stem with 2 Viton® O-rings and Teflon® packing
 Large 20 mesh stainless steel screen
 ¼” PT readout port
 ¼” Ball valve drain with ¾” hose end connection with cap
 Line and one size reduction available with male NPT, female NPT and copper
sweat
Optional Hoses have been specially designed for operating conditions in heating
and air conditioning. The hose is not sensitive to glycol or water treatment
products. When ordered, two hoses accompany each pipe package, and will be
loose in the bag for easy connection. Hoses have a male NPT connnection, and
must mate to a female NPT strainer tailpiece and union body.
Viton® is a register trademark of DuPont.
800-543-9038 USA
6
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.


Isolation Valve for PICCV is a combination of an isolation valve, union, manual
air vent and PT port into a single part. Eliminates up to 7 piping connections.
 Manual air vent
 Forged brass body, chrome ball available in female NPT and copper sweat
 ¼” PT readout port
 Triple seal, blow out proof stem with 2 Viton® O-rings and Teflon® packing
with chrome ball
 Line and one size reduction available with male NPT
Installation
Pipe Package


COIL
***




air vent


PICCV (½”, ¾” and 1”)
 Union
 Belimo Valve and Actuator
 Isolation Valve
 Strainer or Isolation Valve (Strainer shown)**
 Optional hoses are available*
Note: Valve and actuator need to be ordered separately.


air

vent
COIL
***






2-way CCV (½”, ¾” and 1”)
 Union
 Belimo Valve and Actuator
 Manual Balance Valve
 Strainer**
 Optional hoses are available*
Note: Valve and actuator need to be ordered separately.




air vent
COIL








Note: Extra piping for Isolation valve to the Strainer and to the CCV is required.



air vent
***
COIL
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
***
3-way CCV (½”, ¾” and 1”)
 Union
 Belimo Valve and Actuator
 Manual Balance Valve
 Strainer**
 Isolation Valve
 Optional hoses are available*






2-way Zone Valve (½”, ¾” and 1”)
 Union
 Belimo Valve and Actuator
 Manual Balance Valve
 Strainer**
 Optional hoses are available*
Note: Valve and actuator need to be ordered separately.


* Note: Every pipe package that is ordered with a flexible hose will have 2 hoses and will be loose in the bag for easy connection.
**Note: Strainer, 3-way CCV and Isolation Valve will be loose in the bag.
***Return side packages are the standard. Need for a supply side package, please contact customer service at 800-543-9038.
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
7
Union Valve
Integrated Union / Readout Port
Application
The integrated Union with readout port combines the features of a dielectric
union, reducer/adaptor fittings and pressure/temperature readout port into a
single unit.
P/T port
Tail piece side
Connection Availability
Body end
Body side
Technical Data
Service
Sizes
Materials:
Body
Nut
Tailpiece
Gasket
Insulator
Readout port body & cap
Readout port seal
Media temp. range
chilled or hot water, 60% glycol
½”, ¾”, 1”, 1¹/₄”, 1½”, 2”
forged brass
forged brass
forged brass
EPDM
glass reinforced nylon (dielectric)
extruded brass
Nordel
0°F to 212°F [-18°C to +100°C]
L
L
W
W
½” female NPT with P/T port
½” sweat with P/T port
½” male NPT with P/T port
¾” female NPT with P/T port
¾” sweat with P/T port
¾” male NPT with P/T port
1” female NPT with P/T port
1” sweat with P/T port
1” male NPT with P/T port
1” to ¾” female NPT with P/T port
1” to ¾” sweat with P/T port
1” to ¾” male NPT with P/T port
¾” to ½” female NPT with P/T port
¾” to ½” sweat with P/T port
¾” to ½” male NPT with P/T port
Dimensions
Inches [mm]
W
1.57” [39.88]
1.77” [44.96]
2.13” [54.10]
2.63” [66.80]
2.91” [73.91]
3.60” [91.44]
800-543-9038 USA
8
Part Number
PPU111
PPU121
PPU131
PPU211
PPU221
PPU231
PPU311
PPU321
PPU331
PPU411
PPU421
PPU431
PPU511
PPU521
PPU531
Note: All reductions are on the tail piece side.
Only standard sizes are shown, consult factory for sizes 1¼” to 2” inch sizes.
Direction of Flow
Dimensions
Valve
Nominal Size
Inches DN [mm]
½”
[12.70]
¾”
[19.05]
1”
[25.40]
1¼”
[31.75]
1½”
[38.10]
2”
[50.80]
Tailpiece end
Body end
with one size
reduction
Body end
with two size
reductions
female NPT ½” thru 2”
male NPT ½” thru 2”
copper SWT ½” thru 2”
male NPT ½” thru 2”
female NPT ¾” thru 2”
male NPT ¾” thru 2”
copper SWT ¾” thru 2”
female NPT 1” thru 2”
male NPT 1” thru 2”
copper SWT 1” thru 2”
L
2.65” [67.31]
2.75” [69.85]
2.97” [75.44]
3.18” [80.77]
3.34” [84.84]
3.38” [85.85]
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
This greatly simplifies the Contractor’s job by eliminating numerous piping
connections, thus saving time, money, and potential leak points. The Union
is available with female NPT, male NPT or copper sweat connections, making
tough piping jobs a snap.
Isolation Valve
Integrated 100% Port Ball Valve/Union/Readout Port
Manual air vent
Shut off
Tail piece side
Body side
³
Application
This Isolation Valve combines the features of an isolation valve, union, and pressure/
temperature readout ports into a single unit. The full port design is favored by Engineers
because it minimizes terminal unit piping pressure drop and the forged brass body ensures
reliable leak-free performance.
This Isolation Valve greatly simplifies the contractor’s job by eliminating up to nine piping
connections, thus saving time, money, and potential leak points. The Isolation Valve
requires only one third the space of the components it replaces, making tough piping jobs
a snap.
• All Isolation Valves are equipped with a manual air vent.
P/T port
Connection Availability
Body end
Technical Data
Service
Sizes
Materials:
Body
Ball
Stem
Union
Tailpiece
Readout port body & cap
Seats
Packing
O-rings
Readout port
Media temp. range
Leakage
chilled or hot water, 60% glycol
½”, ¾”, 1, 1¹/₄”, 1½”, 2”
forged brass
chrome plated/hot forged brass
extruded brass
forged brass
forged brass
extruded brass
Virgin PTFE
Virgin PTFE
Viton
Nordel
0°F to 212°F [-18°C to 100°C]
0%
Tailpiece end
Body end
with one size
reduction
Body end
with two size
reduction
Part Number
PPV1110
PPV1210
PPV2110
PPV2210
PPV3110
PPV3210
PPV4110
PPV4210
PPV5110
PPV5210
female NPT ½” thru 2”
copper SWT ½” thru 2”
male NPT ½” thru 2”
female NPT ¾” thru 2”
copper SWT ¾” thru 2”
female NPT 1” thru 2”
copper SWT 1” thru 2”
½” female w/manual air vent and P/T port
½” sweat w/manual air vent and P/T port
¾” female w/manual air vent and P/T port
¾” sweat w/manual air vent and P/T port
1” female w/manual air vent and P/T port
1” sweat w/manual air vent and P/T port
1” to ¾” female w/manual air vent and P/T port
1” to ¾” sweat w/manual air vent and P/T port
¾” to ½” female w/manual air vent and P/T port
¾” to ½” sweat w/manual air vent and P/T port
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
Note: All reductions are on the tail piece side.
Only standard sizes are shown, consult factory for sizes 1¼” to 2” inch sizes.
Direction of Flow
Dimensions
Valve
Cv
Dimensions Inches [mm]
Nominal Size
Rating
Inches DN [mm]
A
B
C
D
E
1,26” [32.00] 1.53” [38.86] 0.59” [14.99] 2.95” [74.93]
½”
[12.70] 20.25
4.07 [103.4]
1.26” [32.00] 1.93” [49.02] 0.79” [20.07] 3.74” [95.00]
¾”
[19.05] 41.83
4.35 [110.5]
1.26” [32.00] 1.93” [49.02] 0.79” [20.07] 3.74” [95.00]
¾”
[19.05] 41.83
4.80 [121.9]
1.42” [37.08] 2.40” [60.96] 1.00” [25.40] 4.73” [120.10]
1”
[25.40] 78.38
5.00 [127]
1.42” [37.08] 2.40” [60.96] 1.00” [25.40] 4.73” [120.10]
1”
[25.40] 78.38
5.45 [138.4]
1.42” [37.08] 2.59” [65.79] 1.25” [31.75] 4.72” [119.90]
1¼”
[31.75] 132.10
5.43 [137.9]
1.42” [37.08] 2.59” [65.79] 1.25” [31.75] 4.72” [119.90]
1¼”
[31.75] 132.10
5.98 [151.9]
1.73” [43.94] 3.22” [81.79] 1.57” [39.88] 4.72” [119.90]
1½”
[38.10] 206.96
6.16 [156.5]
1.73” [43.94] 3.22” [81.79] 1.57” [39.88] 4.72” [119.90]
1½”
[38.10] 206.96
7.03 [178.6]
1.73” [43.94] 3.50” [88.90] 2.00” [50.80] 5.90” [149.90]
2”
[50.80] 346.00
6.79 [172.5]
1.73” [43.94] 3.50” [88.90] 2.00” [50.80] 5.90” [149.90]
2”
[50.80] 346.00
7.93 [201.4]
Note: the Cv factor is the flow rate in GPM through the valve at a 1 PSID. For calculated pressure drop across the
Isolation valve, calculate P = (GPM
)2 . Cv rating supplied in the chart.
C
Custom Option: The Isolation Valve is available in a
body side press option for sizes ½” through 2”.
The Isolation Press greatly simplifies the Contractor’s job by eliminating up to nine piping connections,
thus saving time, money and potenial leak points.
The Isolation Press requires only one third the space
of the components it replaces, making tough piping
jobs a snap. The Isolation Press is designed for direct
mechanical connection to ASTM B88-Type K, L and M
copper tubing in the hard drawn condition.
v
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
9
Manual Balance Valve
Integrated Manual Balancing Valve/Union/Isolation Valve
Application
Manual air vent
P/T port
The Manual Balance Valve combines the features of an isolation valve, union, and pressure/
temperature readout ports, along with the added value of a low-loss, high-signal venturi
readout device into a single unit. The addition of the venturi makes this product perfect for
readout and setting flow of individual circuits accurate to +/- 2%. Also, the forged brass
body of the Manual Balance Valve is favored by Engineers because it ensures reliable,
leak-free performance.
Tail piece side
Body side
The Manual Balance Valve greatly simplifies the Contractor’s job by eliminating up to ten
piping connections, thus saving time, money, and potential leak points. Finally, the Manual
Balance Valve is available with female NPT, male NPT, or SWT, single and double nominal
size reducer tailpiece connections making tough piping jobs a snap.
Shut off handle
• All Manual Balance Valves come with a manual air vent.
Technical Data
Service
Sizes
Materials:
Body
Ball
Stem
Union
Tailpiece
Gland nut
Lever handle
Lever nut
Seals & packing
O-rings
Venturi
Readout port body & cap
Readout port seal
Memory stop
Media temp. range
Leakage
chilled or hot water, 60% glycol
½”, ¾”, 1, 1¹/₄”, 1½”, 2”
Tailpiece end
Body end with one size reduction
forged brass
chrome plated/forged brass
extruded brass
forged brass
forged brass
extruded brass
Dacromet coated steel with PVC grip
Dacromet coated steel
Virgin PTFE
Viton
extruded brass
extruded brass
Nordel
forged brass
0°F to 212°F [-18°C to +100°C]
0%
Body end with two size reductions
D
E
C
B
A
female NPT ½” thru 2”
copper SWT ½” thru 2”
male NPT ½” thru 2”
female NPT ¾” thru 2”
copper SWT ¾” thru 2”
female NPT 1” thru 2”
copper SWT 1” thru 2”
Part Number
PPL1111 ½” female NPT with manual vent and P/T port (1.75 GPM) Venturi 4
PPL1112 ½” female NPT with manual vent and P/T port (3.50 GPM) Venturi 6
PPL1113 ½” female NPT with manual vent and P/T port (9.00 GPM) Venturi 9
PPL1211 ½” female NPT sweat with manual vent and P/T port (1.75 GPM) Venturi 4
PPL1212 ½” sweat with manual vent and P/T port (3.50 GPM) Venturi 6
PPL1213 ½” sweat with manual vent and P/T port (9.00 GPM) Venturi 9
PPL2111 ¾” female NPT with manual vent and P/T port (1.75 GPM) Venturi 4
PPL2112 ¾” female NPT with manual vent and P/T port (3.50 GPM) Venturi 6
PPL2113 ¾” female NPT with manual vent and P/T port (9.00 GPM) Venturi 9
PPL2211 ¾” sweat with manual vent and P/T port (1.75 GPM) Venturi 4
PPL2212 ¾” sweat with manual vent and P/T port (3.50 GPM) Venturi 6
PPL2213 ¾” sweat with manual vent and P/T port (9.00 GPM) Venturi 9
PPL3114 1" female NPT with manual vent and P/T port (10.00 GPM) Venturi 10
PPL3115 1" female NPT with manual vent and P/T port (20.00 GPM) Venturi 14.5
PPL3214 1" sweat with manual vent and P/T port (10.00 GPM) Venturi 10
PPL3215 1" sweat with manual vent and P/T port (20.00 GPM) Venturi 14.5
PPL4114 1"-¾” female NPT with manual vent and PT port (10.00 GPM) Venturi 10
PPL4115 1"-¾” female NPT with manual vent and PT port (20.00 GPM) Venturi 14.5
PPL4214 1"-¾” sweat with manual vent and PT port (10.00 GPM) Venturi 10
PPL4215 1"-¾” sweat with manual vent and PT port (20.00 GPM) Venturi 14.5
PPL5111 ¾”-½” female NPT with manual vent and P/T port(1.75 GPM) Venturi 4
PPL5112 ¾”-½” female NPT with manual vent and P/T port(3.50 GPM) Venturi 6
PPL5113 ¾”-½” female NPT with manual vent and P/T port(9.00 GPM) Venturi 9
PPL5211 ¾”-½” sweat with manual vent and P/T port(1.75 GPM) Venturi 4
PPL5212 ¾”-½” sweat with manual vent and P/T port(3.50 GPM) Venturi 6
PPL5213 ¾”-½” sweat with manual vent and P/T port(9.00 GPM) Venturi 9
Note: All reductions are on the tail piece side.
Only standard sizes are shown, consult factory for sizes 1¼” to 2” inch sizes.
Direction of Flow
Dimensions
Valve
Nominal Size
Inches DN [mm]
A
½”
[12.70] 3.39” [86.11]
¾”
[19.05]
3.39” [86.11]
Dimensions Inches [mm]
B
1.22” [30.99]
1.23” [31.24]
C
0.59” [14.99]
0.59” [14.99]
D
2.95” [74.93]
2.95” [74.93]
E
1.57” [39.88]
1.57” [39.88]
1”
[25.40] 3.91” [99.31] 1.53” [38.86] 0.79” [20.07] 3.74” [95.00] 1.93” [49.02]
1¼”
[31.75] 4.65” [118.1] 1.69” [42.93] 0.98” [24.89] 4.72” [119.9] 2.44” [61.98]
1½”
[38.10] 5.04” [128.0] 1.83” [46.48] 1.26” [32.00] 4.72” [119.9] 2.64” [67.06]
5.91” [150.1]
3.29” [83.57]
2”
[50.80] 5.83” [148.1] 2.05” [52.07] 1.58” [40.13]
2
*For calculated press drop across the Manual Balance Valve calculate P = (GPM
)
Cv
rating
is based on
Cv
Venturi size and Cv noted in graph on page 10 (i.e. Venturi 4 has a Cv rating of 1.30)
800-543-9038 USA
10
866-805-7089 CANADA
Custom Option: The Manual Balance Valve is available
in a body side press option for sizes ½” through 2”.
The Manual Balance Valve press greatly simplifies
the Contractor’s job by eliminating up to ten piping
connections, thus saving time, money and potenial leak
points. The Manual Balance Valve press is designed for
direct mechanical connection to ASTM-Type K, L and M
copper tubing in the hard drawn condition.
203-791-8396 LATIN AMERICA
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
Connection Availability
Body end
800-543-9038 USA
866-805-7089 CANADA
.
3/4'' w/ # 4 VENTUR I: 1.30
3/4'' w/ # 6 VENTUR I: 2.65
3/4'' w/ # 7.5 VENTUR I: 3.61
3/4'' w/ # 9 VENTUR I: 7.05
.05
.1
.15
.2 .25
1'' w/ # 10 VENTUR I:
7.05
1'' w/ # 14.5 VENTUR I:
17.6
(C V FAC TORS FOR USE BY ENGINEERS)
1/2'' &
1/2'' &
1/2'' &
1/2'' &
C V OF VALVES :
.5
G PM
1
1.5
Balancer can utilize graph to indicate flow based on Venturi size and ΔP (inches H20).
2''
3''
4''
5''
6''
10''
9''
8''
7''
15''
20''
30''
1 PS I
40''
50''
60''
100''
90''
80''
70''
UR I
4 VE
NT
#
UR I
2 2.5
#6V
E NT
#9V
E NT
UR
# 10
I
VE N
TUR
I
5
10
UR I
15
# 14
. 5 VE
NT
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
20 25
50
Manual Balance Valve Pressure Drop Diagram
va tive hydronic c omponents a nd acc ess ories for the HVA C industry.
Miller Dr. S uite 2 00 W arren, MI 48092 t P hone: 1-800-313-H VA C F ax: 1 -86
203-791-8396 LATIN AMERICA
11
800-543-9038 USA
20"
30"
866-805-7089 CANADA
omponents an d ac ce ss ories for the HVA C industry.
2 00 W ar ren, M I 48 09 2 t P hone: 1 -800 -313 -H VA C
F ax : 1 -8
203-791-8396 LATIN AMERICA
1
2
3
15.0
34.0
20.9
57.0
30.8
57.0
88.0
(CV FACTORS FOR USE BY ENGINEERS)
CV OF VALVES:
1-1/4" w/# 13 VENTURI
1-1/4" w/# 19 VENTURI
1-1/2" w/# 15 VENTURI
1-1/2" w/# 22 VENTURI
2" w/# 18 VENTURI
2” w/# 25 VENTURI
2" w/# 32 VENTURI
3
4
4
5
5
6
6
7
7
8 9 10
8 9 10
#1
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
RI
TU
RI
TU
#1
3V
EN
/4"
GPM
1-1
20
#
20
2"
30
30
40
40
RI
TU
2
#
RI
TU
18
VE
N
RI
TU
/4"
5V
EN
/2"
1-1
Balancer can utilize graph to indicate flow based on Venturi size and ΔP (inches H20).
1"
2"
3"
4"
5"
6"
10"
9"
8"
7"
1ps i
40"
50"
60"
1
#
19
VE
N
#
50
RI
TU
50
25
VE
N
2"
22
VE
N
/2"
1-1
60 70 80 90 100
#3
60 70 80 90 100
2"
RI
TU
2V
EN
12
1-1
100"
90"
80"
70"
Manual Balance Valve Pressure Drop Diagram
Strainer
Integrated Ball Valve/Strainer with Union & P/T Readout Port
Application
The Strainer combines the features of an isolation valve, strainer, union, and pressure/
temperature readout port into a single unit. The forged brass body ensures reliable,
leak-free performance. Multiple taps/bosses offer versatility for additional accessories to
accommodate piping configuration requirements.
Tail piece side
The Strainer greatly simplifies the Contractor’s job by eliminating several piping connections,
thus saving time, money, and potential leak points. Finally, the Strainer requires only one third
the space of the components it replaces, making tough piping jobs a snap.
Body side
Connection Availability
Body end
Tailpiece end
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
Technical Data
Service
Sizes
Materials:
Body
Union nut
Ball
Stem piece & gland nut
Tailpiece
Lever handle
Lever nut
Seals & packing
Stem O-rings
Strainer screen
Readout port body & cap
Readout port
Media temp. range
Leakage
Tailpiece end with
one size reduction
chilled or hot water, 60% glycol
½”, ¾”, 1, 1¹/₄”, 1½”, 2”
forged brass
forged brass
chrome plated/forged brass
forged brass
forged brass
zinc plated steel with vinyl grip
extruded brass
PTFE
Viton
304 stainless steel / 20 mesh screen
extruded brass
Nordel
0°F to 212°F [-18°C to +100°C]
0%
B
C
E
A
D
Body end with two size
reduction
Part Number
PPS1111
PPS1112
PPS1113
PPS1211
PPS1212
PPS1213
PPS2111
PPS2112
PPS2113
PPS2211
PPS2212
PPS2213
PPS3111
PPS3112
PPS3113
PPS3221
PPS3222
PPS3213
PPS4111
PPS4112
PPS4113
PPS4211
PPS4212
PPS4213
PPS5111
PPS5112
PPS5113
PPS5211
PPS5212
PPS5213
Direction of Flow
female NPT ½” thru 2”
copper SWT ½” thru 2”
female NPT ½” thru 2”
male NPT ½” thru 2”
copper SWT ½” thru 2”
female NPT ¾” thru 2”
male NPT ¾” thru 2”
copper SWT ½” thru 2”
female NPT 1” thru 2”
copper SWT 1” thru 2”
½” strainer, female NPT to female NPT w/blow down/drain port and P/T port
½” strainer, female NPT, sweat w/blow down/drain port and P/T port
½” strainer, female NPT to male NPT w/blow down/drain port and P/T port
½” strainer, sweat to female NPT w/blow down/drain port and P/T port
½” strainer, sweat to sweat w/blow down/drain port and P/T port
½” strainer, sweat to male NPT w/blow down/drain port and P/T port
¾” strainer, female NPT to female NPT w/blow down/drain port and P/T port
¾” strainer, female NPT to sweat w/blow down/drain port and P/T port
¾” strainer, female NPT to male NPT w/blow down/drain port and P/T port
¾” strainer, sweat to female NPT w/blow down/drain port and P/T port
¾” strainer, sweat to sweat w/blow down/drain port and P/T port
¾” strainer, sweat to male NPT w/blow down/drain port and P/T port
1” strainer, female NPT to female NPT w/blow down/drain port and P/T port
1” strainer, female NPT to sweat w/blow down/drain port and P/T port
1” strainer, female NPT to male NPT w/blow down/drain port and P/T port
1 strainer, sweat to female NPT w/blow down/drain port and P/T port
1” Strainer, sweat to sweat w/blow down/drain port and P/T port
1” strainer, sweat to male NPT w/blow down/drain port and P/T port
1” to ¾” strainer, female NPT to female NPT w/blow down/drain port and P/T port
1 to ¾” strainer, female NPT to sweat w/blow down/drain port and P/T port
1 to ¾” strainer, female NPT to male NPT w/blow down/drain port and P/T port
1 to ¾” strainer, sweat to female NPT w/blow down/drain port and P/T port
1 to ¾” strainer, sweat to sweat w/blow down/drain port and P/T port
1 to ¾” strainer, sweat to male NPT w/blow down/drain port and P/T port
¾” to ½” strainer, female NPT to female NPT w/blow down/drain port and P/T port
¾” to ½” strainer, female NPT to sweat w/blow down/drain port and P/T port
¾” to ½” strainer, female NPT to male NPT w/blow down/drain port and P/T port
¾” to ½” strainer, sweat to female NPT w/blow down/drain port and P/T port
¾” to ½” strainer, sweat to sweat w/blow down/drain port and P/T port
¾” to ½” strainer, sweat to male NPT w/blow down/drain port and P/T port
Note: All reductions are on the tail piece side.
Only standard sizes are shown, consult factory for sizes 1¼” to 2” inch sizes.
Dimensions
Valve
Cv
Dimensions Inches [mm]
Nominal Size
Rating
Inches DN [mm]
A
B
C
D
½”
[12.70]
5.50
3.80” [96.52] 3.40” [86.36] 1.70” [43.18] 1.50” [63.50]
¾”
[19.05]
9.00 5.20” [132.10] 3.40” [86.36] 1.80” [45.72] 2.50” [63.50]
1”
[25.40]
9.00 5.30” [134.60] 3.40” [86.36] 1.80” [45.72] 2.50” [63.50]
1¼” [31.75] 28.00 6.60” [167.60] 4.40” [111.80] 2.50” [63.50] 2.50” [63.50]
1½” [38.10] 28.00 6.60” [167.60] 4.40” [111.80] 2.50” [63.50] 2.50” [63.50]
2”
[50.80] 32.00
11.30” [287] 5.50” [139.70] 3.50” [88.90] 2.50” [63.50]
E
1.00” [25.40]
1.00” [25.40]
1.20” [30.48]
1.70” [43.18]
1.90” [48.26]
1.90” [48.26]
Custom Option: The Y Strainer is available in a body side
press option for sizes ½” through 2”. The Strainer Press
greatly simplifies the Contractor’s job by eliminating several
piping connections, thus saving time, money and potenial
leak points. The Strainer Press requires only one third the
space of the components it replaces, making tough piping
jobs a snap. The Strainer Press is designed for direct
mechanical connection to ASTM B88-Type K, L and M copper
tubing in the hard drawn condition.
Note: the Cv factor is the flow rate in GPM through the valve at a 1 PSID. For calculated pressure drop across the Strainer,
2
calculate P = (GPM) . Cv rating supplied in the chart.
Cv
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
13
Flexible Hose
Application
The flex hose has been specially designed for operating conditions in heating
and air conditioning application coils.
Each hose is made up of several components and the special 12 point double
crimping on the ferrule under strict quality control gives this hose double
security against any leakage. The special EPDM core meets a fully defined
specification. Shore hardness, resistance to aging, mechanical resistance (elasticity, tensile fracture, stretching), ability to accept chemical agents in contact
with the elastomer and non-toxic. The elastomer is not sensitive to Glycol or
water treatment products.
Hoses meet 25/50 flammability and smoke development classification
requirements of codes and specifications when tested by ASTM E 84 method.
Technical Data
External Braiding
Crimping Ferrules
Connectors
Fiber Gasket
Core
All hoses are male NPT x female swivel NPSM male cone to male NPT adaptor.
stainless steel AISI 304
stainless steel AISI 304
machined brass
BA-U fiber washer
Formulated EPDM
On Installation: Avoid absolutely any tension due to stretching during the
course of tightening the connectors.
1. Install and tighten the fixed male connector (if applicable).
2. Install and tighten the union adaptor (if applicable).
3. Install and tighten the swivel nut. Use two spanners in order to screw in
the union: one to hold the hexagon of the adaptor and the other to tighten
the nut at the same time.
Operating & Burst Pressure Rating
1/2”
375 psi operating
1500 psi burst pressure
3/4”
300 psi operating
1200 psi burst pressure
1”
225 psi operating
900 psi burst pressure
1 1/4”
200 psi operating
800 psi burst pressure
1 1/2”
175 psi operating
600 psi burst pressure
2”
150 psi operating
500 psi burst pressure
Temperature Rating
5°F to 230°F (-15°C to 110°C)
Important: Do not re-screw the fixed connector or adaptor after tightening the
swivel nut; this will cause tensioning of the flexible hose with a risk of rapid
deterioration at this point. On removal, take the same precautions. If the
flexible hose incorporates two fixed connectors, at least one must be installed
on a counter-part fitted with a screw connector.
Temperature rating must adhere to the control valve and pipe package valve specs when
assembled to hoses.
Part Number
PHOSE1
PHOSE2
PHOSE3
PHOSE4
PHOSE5
PHOSE6
½”, 12” long male NPT X male NPT
½”, 24” long male NPT X male NPT
¾”, 12” long male NPT X male NPT
¾”, 24” long male NPT X male NPT
1”, 12” long male NPT X male NPT
1”, 24” long male NPT X male NPT
Cv Ratings
Cv
12” Length
18” Length
24” Length
36” Length
1/2”
3.3
3.2
3.1
3.0
3/4”
11.0
10.7
9.9
9.3
1”
20.9
20.3
19.5
18.2
1 1/4”
NA
37.9
36.9
34.7
1 1/2”
NA
64.4
61.0
55.0
2”
NA
NA
110.7
100.8
For calculated pressure drop across each hose, calculate P = (GPM
) . Cv rating is
Cv
supplied in the above chart.
2
Dimensions
Hose Size
12” [304.80] Length
24” [609.60] Length
½” [12.70]
½” [12.70]
Dimensions Inches [mm]
¾” [19.05]
1” [25.40]
¾” [19.05]
1” [25.40]
CUSTOM OPTION: The Flexible Hose set is also available in sizes 1 1/4” to 2”. Please
contact Customer Service for details at 800-543-9038.
Male NPT hose connection must mate with end connection of Union and Strainer (female
NPT must be selected for Strainer tallpiece and Union body if ordering hoses.)
800-543-9038 USA
14
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
NOTE: Every pipe package that is ordered with a flexible hose will have 2 hoses and will be
loose in the bag for easy connection to any side of the package.
Terms and Conditions of Sale of Warranty
I.
General
1.1. The following Terms and Conditions of Sale (“Terms”) apply to the sale of
products described in this Product Guide (“Products”). As used herein,
“Seller” or “Belimo” refers to Belimo Aircontrols (USA) Inc. or Belimo
Aircontrols (CAN) Inc., as applicable, and “Client” refers to the individual or
business entity that purchases the Products from Seller. These Terms shall
apply unless the parties mutually agree to different terms and memorialize
such agreement in a writing signed by both Client and Seller.
II.
Price
2.1. The Seller’s price for Products (the “Price”) is net, F.O.B. Point of Origin,
and is calculated in US currency for sales made by Belimo Aircontrols
(USA), Inc. and calculated in Canadian currency for sales made by Belimo
Aircontrols (CAN) Inc.
2.1. The Price, unless otherwise agreed upon, does not include freight and
packaging (wooden crates, pallets, etc), the costs of which will be charged to
Client at cost for each shipment and shall be payable with payment of the
Price.
2.3. Orders for Products with a net value of less than US$300 (CAN$450) will be
subject to a US$20 (CAN$35) handling fee (the “Handling Fee”). The
Handling Fee will not be charged for orders of Products with a net value
equal to or greater than US$300 (CAN$450) or for Products ordered
through Seller’s internet ordering system at: www.belimo.com.
2.4. Seller reserves the right to make partial deliveries of orders of Products,
each of which deliveries may be invoiced separately by Seller.
2.5. The Price does include charges for wiring diagrams, installation, and
commissioning, which will be charged to Client separately and will be
payable on demand.
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
III.
IV.
Payment
3.1. Invoices are payable in US currency for sales made by Belimo Aircontrols
(USA), Inc. and in Canadian currency for sales made by Belimo Aircontrols
(CAN) Inc. and are due no later than 30 days from the date of invoice,
without any deductions.
3.2. If Client fails to pay the entire invoice balance within 60 days from the date
of the invoice, Client will be subject to an interest charge of 2% per month
(or the maximum rate permitted by law, whichever is less) on the
outstanding unpaid balance due to Seller.
3.3. Clients who maintain outstanding balances for 45 days or more after the
date of invoice may be subject to restricted shipments of Products or may
be required to pay for all future deliveries of Products on a cash-on-delivery
basis.
Title and Risk
4.1. Title to all Products shall remain with Seller and shall not pass to Client
until Seller has received full payment for the Products.
V.
Damage or Loss in Transit
5.1. Seller assumes no liability for damage or loss of shipment of Products,
which risk shall at all times remain with the carrier. All shipments must be
unpacked and examined by Client immediately upon receipt. Any external
evidence of loss or damage must be noted on the freight bill accompanying
the shipment of Products or carrier’s receipt and signed by the carrier’s
agent at the time of delivery. Failure to do so will result in the carrier’s
refusal to honor any claim relating to damage of Products. Client must also
notify Seller of such damage by providing Seller with a copy of the freight
bill or damage report so that Seller can file a claim for loss or damage in
transit with the carrier. If the damage does not become apparent until the
shipment is unpacked, customer must make a request for inspection by the
carrier’s agent and file with the carrier within 15 days after receipt of
product and notify Seller of the same. Seller is not liable for consequential
damage to Client’s property or a third-party’s property resulting from the
installation of damaged Products.
VI.
Delivery
6.1. Seller undertakes to make every attempt to adhere to its stated delivery
parameters and to make a timely delivery of the Products but does not
guarantee any delivery specifications. Each contract entered into for the
purchase of Products is not cancelable nor is Seller liable for any direct or
indirect losses that may arise, for any reason whatsoever, due to Seller’s
failure to meet any stated or assumed delivery schedules.
800-543-9038 USA
VII.
Return of Goods
7.1. Products received by Client cannot be returned unless: (i) Client alerts Seller
that it intends to return such Products, (ii) Seller agrees to accept the return
of such Products, (iii) Client obtains a Return Material Authorization
(“RMA”) number from Seller for the return of such Products, and (iv) Client
follows all return instructions provided by the Seller. The RMA number
must be clearly written on the outside of all packaging for any returned
Products. Only Products returned to proper the location as instructed by
Seller and identified with an RMA number will be considered for credit.
7.2. Only Products that are returned in original packaging may be accepted for
return. Such returned Products must be received in good condition,
adequate for resale as new Products to qualify for credit. Client will be
responsible for payment of a restocking charge for all returned Products in
an amount no less than 75% of the invoice value of the Products
(“Restocking Charges”). All return Products must be shipped to Seller at
Client’s cost.
7.3. Returns that result from Seller errors will be credited in full and will not be
subject to Restocking Charges.
VIII.
Warranty
VIII.A 5-year Warranty
8.1. Products that are listed in this Product Guide as carrying a 5-year warranty
and shipped after May 1, 2000 to a location in the United States or Canada
shall carry a 5-year warranty. The 5-year warranty is unconditional for the
first two years from the date of production of the Products. After the first
two years from the date of Production, the warranty shall be conditional and
the warranty coverage shall not apply to damage to Products caused by
ordinary wear and tear, negligence or improper use by Client, or other
causes beyond the control of the Seller. Product -specific terms of warranty
with regard to warranty period or conditions of warranty may apply to
certain specified Products as stated in the documentation for those
Products.
VIII.B 2-year Conditional Warranty
8.2. Products that are listed in this Product Guide as carrying a 2-year warranty
and shipped after May 1, 2005 to a location in the United States or Canada
shall carry a 2-year warranty. The 2-year warranty is conditional and the
warranty coverage shall not apply to damage to Products caused by
ordinary wear and tear, negligence or improper use by Client, or other
causes beyond the control of the Seller. Product -specific terms of warranty
with regard to warranty period or conditions of warranty may apply to
certain specified Products as stated in the documentation for those
Products.
VIII.C General Warranty Terms
8.3. Seller’s warranty may be null and void in the event of any: (a) modification
or unauthorized repairs of Products by Client, (b) unauthorized
incorporation or integration of Products into or with Client’s equipment, (c)
use of Products in an unauthorized manner, or (d) damage to Products not
caused by Seller.
8.4. Client must promptly notify Seller of Products’ alleged defect and provide
Seller with other evidence and documentation reasonably requested by
Seller. Before removing Products from service, Client should contact a
Seller-authorized support technician by calling Belimo customer service.
The contact information for Belimo customer service is listed on the back
page of Belimo’s Product Guide and Price List (“PGPL”) or may be found at
www.belimo.com. Belimo customer service will work with field technicians
to troubleshoot problems. Many problems can be resolved over the phone.
8.5. If a problem cannot be resolved over the phone, an RMA number will be
issued by Seller for return of the Products. Prior to returning any Products
under a warranty, Client must obtain an RMA number from Seller, along
with shipping instructions for the return. The RMA number must be clearly
written on the outside of the box containing the returned Products. Only
Products returned to the proper location and identified with an RMA
number will be accepted by the Seller.
8.6. All returned Products should be packaged appropriately to prevent further
damage. Seller reserves the right to refuse any returned material if
improperly packaged or labeled (without an RMA number). Products
returned without proper RMA documentation will void Seller’s warranty.
8.7. Products found to be defective for which a warranty is applicable will either
be replaced or repaired at the Seller’s discretion. Seller is not responsible
for charges that Client may incur as a result of the removal or replacement
of Products.
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
15
Terms and Conditions of Sale of Warranty
X.
No Warranty for Non-HVAC Application
9.1. All Seller warranties shall extend only to HVAC use of the Products. If
Products are used in non-HVAC application (e.g., aircraft, industrial
processes, etc.), Seller’s warranties shall not cover such Products. Client
will be solely responsible for any damage to or malfunction of Products or
for any damage resulting from such use of Products.
XIII.
Proper Law and Jurisdiction
11.1. All sales of Products under these Terms and the warranties described herein
shall be governed by the laws of the State of Connecticut, and the parties
agree to submit to the exclusive jurisdiction of the Federal and state courts
located in the State of Connecticut with respect to any dispute arising from
the subject matter hereof. The parties hereby waive all rights to a jury trial
in connection with any claims relating to the subject matter hereof.
Liability Disclaimer
10.1. These Terms constitute the entire understanding and agreement between
Seller and Client regarding the warranties that cover Products and
supersedes all previous understandings, agreements, communications and
representations. Seller shall not be responsible for and Client does not have
any right to make any claim for, damage that occurs to any property other
than Products. Seller shall in no way be responsible for any costs incurred
by Client in the determination of the causes of damage to any of Client’s
property, for expert opinions, or for any punitive or special, incidental or
consequential damages of any kind whatsoever.
10.2. Seller shall not be liable for any damage resulting from or contributed by
Client or third parties acting within the scope of responsibility of Client or
such third party when:
1. Products are used for non-HVAC applications, such as in aircrafts,
industrial processes, etc.;
2. Client uses the Products without complying with applicable law or
institutional regulations or Belimo data and installation sheets or Client
uses the Products without following good industry practice;
3. Products are used by personnel who have not received suitable
instruction; or
4. Products are modified or repaired without the written approval of Seller.
When requested to do so, Client shall immediately release Seller in full
from any possible third party claims resulting in connection with the
circumstances listed above. This also applies to claims in connection with
product liability.
10.3. If Client becomes aware that any third party has made or appears likely to
make any claim regarding Products (including, without limitation, regarding
Product defects or rights infringed by Products), then Client shall
immediately inform Seller and afford to Seller all assistance that Seller may
require to enforce its rights and defend such claim.
L30046 - 06/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
IX.
8.8. Repaired or replacement Products are shipped from Seller via ground
shipment. Other shipping methods are available at the sole expense of the
Client.
8.9. Repaired, replaced or exchanged Products will carry a warranty for a period
of time equal to the greater of: (i) the remainder of the original 5-year
warranty or 2-year warranty that was applicable to the repaired, replaced or
exchanged Products, or (ii) six months, effective from the date the repaired,
exchanged or replaced Products are shipped by Seller (the “Replacement
Warranty Period”).
8.10. Advanced replacement Products for Products covered under warranty may
be obtained from Seller after the Belimo customer service troubleshooting
process has been completed. For industrial products (such as butterfly
valves), a purchase order is required. The purchase order will be credited
upon the receipt and verification by Seller of the returned defective
Products. For non-industrial products, an invoice will be issued and shall
be due and payable is the returned Products are not received by Seller
within 60 days from the date of that the replacement Products are shipped.
Additional charges may apply if the nature of the problem has been
misrepresented by Client.
8.11. Both the conditional and unconditional warranties cover the Products only,
and do NOT cover labor associated with the troubleshooting, removal or
replacement of such Products.
8.12. New Products ordered in an attempt to circumvent the warranty process
may NOT be reimbursed if, upon receipt of returned Products, it is
determined that the defect in the returned Products is actually field related,
or the Products have been returned for cosmetic reasons only.
8.13. Advanced replacement Products for butterfly valve actuators may not be
new, but have been verified by the Seller for electrical and mechanical
operation. Such Products carry the full warranty for the entire Replacement
Warranty Period.
800-543-9038 USA
16
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
ACR Supply Company Inc.
2719 Hillsborough Road
Durham, NC 27705
Phone: 919-286-2228
With branches in NC
Aireco Supply
9120 Washington Boulevard
Savage, MD 20763-0414
Phone: 301-953-8800
With branches in MD, VA
Amcon Controls, Inc.
11906 Warfield Street
San Antonio,TX 78216
Phone: 210-349-6161
With a branch in Houston, TX
K20940 - 10/08 - Subject to change. © Belimo Aircontrols (USA), Inc.
Applied Automation
A Wilson Mohr Company
3186 South Washington Street, #230
Salt Lake City, UT 84115
Phone: 801-486-6454
Industrial Controls Distributors LLC
1776 Bloomsbury Avenue
Wanamassa, NJ 07712
Phone: 800-631-2112
With branches in
GA, KY, IN, MA, ME, NC, NY, OH, PA, TN
Jackson Controls
1708 E. 10th Street
Indianapolis, IN 46201
Phone: 317-231-2200
M & M Controls
9E West Aylesbury Road
Timonium, MD 21093
Phone: 410-252-1221
With a branch in Alexandria, VA
MICONTROLS, Inc.
6516 5th Place South
Seattle, WA 98124
Phone: 800-877-8026
With branches in WA, OR
Charles D. Jones Co.
445 Bryant Street, Unit #1
Denver, CO 80204-4800
Phone: 800-777-0910
With branches in CO, MO, KS
Meier Supply
123 Brown Street
Johnson City, NY 13790
Phone: 607-797-7700
With branches in NY, PA
Climatic Control Div/ICD
5061 W. State Street
Milwaukee, WI 53208
Phone: 800-242-1656
With branches in WI
Minvalco, Inc.
3340 Gorham Avenue
Minneapolis, MN 55426-4267
Phone: 952-920-0131
With branches in MN
Cochrane Supply and Engineering, Inc.
30303 Stephenson Highway
Madison Heights, MI 48071-1633
Phone: 800-482-4894
With branches in MI and Maumee, OH
RSD/Refrigeration Supply Distribution
26021 Atlantic Ocean Drive
Lake Forest, CA 92630
Phone: 949-380-7878
With branches in
CA, NV, OR, AK, AZ, ID, UT, WA, MT
Controlco
5600 Imhoff Drive, Suite G
Concord, CA 94520
Phone: 925-602-7728
With branches in CA, NV
Edward C. Smyers & Co.
223 Fort Pitt Boulevard
Pittsburgh, PA 15222-1505
Phone: 412-471-3222
Engineered Control Systems
4805 N.W. 79th Avenue
Suite 11
Miami, FL 33166
Phone: 305-418-8901
With branches in FL
First Source Distributors, LLC
710 Peninsula Lane, Suite E
Charlotte, NC 28273
Phone: 800-670-5977
G & O Thermal Supply
5435 N. Northwest Highway
Chicago, IL 60630
Phone: 773-763-1300
With branches in IL
800-543-9038 USA
For a complete list of distributors
in Canada, please visit our
website: www.belimo.ca
or call toll free: 866-805-7089
Interstate HVAC Controls
30 Vineland Street
Brighton, MA 02135
Phone: 617-782-9000
Boston Aircontrols, Inc.
8 Blanchard Road
Burlington, MA 01803
Phone: 781-272-5800
Columbus Temperature Control
1053 E. 5th Avenue
Columbus, OH 43201
Phone: 800-837-1837
CANADA
USA
Belimo Platinum Distributors
Saint Louis Boiler Supply, Co.
617 Hanley Industrial Court
St. Louis, MO 63144
Phone: 314-962-9242
South Side Control Supply, Co.
488 N. Milwaukee Avenue
Chicago, IL 60610-3923
Phone: 312-226-4900
With branches in IL, IN
Stromquist and Company
4620 Atlanta Road
Smyrna, GA 30080
Phone: 404-794-3440
With a branch in Orlando, FL
Temperature Control Systems
10315 Brockwood Road
Dallas, TX 75238
Phone: 214-343-1444
With branches in OK, TX
Tower Equipment Co., Inc.
1320 West Broad Street
Stratford, CT 06615
Phone: 800-346-4647
Twinco Supply Corporation
55 Craven Street
Huntington Station, NY 11746-2143
Phone: 800-794-3188
With branches in NY
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
K20940 - 10/08 - Subject to change. © Belimo Aircontrols (USA), Inc.
Belimo worldwide: www.belimo.com
BELIMO Americas
USA Locations, 43 Old Ridgebury Road, Danbury, CT 06810
Tel. 800-543-9038, Fax 800-228-8283, [email protected]
1675 East Prater Way, Suite 101, Sparks, NV 89434
Tel. 800 987-9042, Fax 800-987-8875, [email protected]
Canada Locations, 14/16 – 5716 Coopers Avenue, Mississauga, Ontario L4Z 2E8
Tel. 866-805-7089, Fax 905-712-3124, [email protected]
Latin America Customer Service, Tel. 203-791-8396, Fax 203-791-9139, [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement