Acura | 2010 TSX | 2010 TSX

2010 TSX
Acura ATG_US.qxd:Acura QSG_US.qxd
4/13/09
3:40 PM
Page 5
2010 TSX
Advanced Technology Guide
10 TSX ATG_Front Inside:Inside Cvr
3/20/2009
2:02 PM
Page 1
Multi-Information
Display
Multi-Information Display (MID)
Consists of several displays that provide you with useful information.
Accessing MID
MID Lower Displays
Once you start the engine, the MID shows the last
active lower display. Press either Info button (▲/▼)
to see the last active selection on the upper display.
Odometer,
Trip A
Upper
Display
Lower
Display
To toggle between the different displays, press
either Info button (▲/▼) for the upper display and
press the SEL/RESET button for the lower display.
Outside temperature,
Trip A
Outside temperature,
Trip B
SEL/RESET
Button
Oil life
INFO Buttons
2010 TSX
10 TSX ATG_Base:Base
3/20/2009
2:02 PM
Page 2
2010 TSX
MID Upper Displays
Basic trip computer displays are shown here.
Instant Fuel Economy
Odometer, Outside
temperature
Average fuel economy for
trips A and B
Bluetooth®
HandsFreeLink® (HFL)
(if paired)
Range with remaining fuel
Tire pressure monitor
Total travel time
Average speed
Multi-Information
Display
10 TSX ATG_Base:Base
3/20/2009
2:02 PM
Page 3
Voice Command/
HFL/Navigation
Voice Command
Using the Voice Command System
To reduce driver distraction, use voice commands for hands-free calling, navigation/compass, audio,
AcuraLink, and climate control functions. A full list of these commands is in the navigation system manual.
HFL Talk button: Give HFL commands
or answer incoming calls.
NAVI Talk button:
Give navigation, audio,
and climate control
commands.
NAVI Back button:
Cancel a command or
return to the previous
screen.
HFL Back button: End a call, go back to
the previous command, or cancel an
operation.
Voice Command Tips:
• Press and release the Talk button, wait for a
beep, then give a command.
• To hear a list of available commands at any
time, say “Hands free help” after you press and
release the Talk button.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from
the microphone in the ceiling.
• Close the windows.
2010 TSX
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:03 PM
Page a3
2010 TSX
Bluetooth® HandsFreeLink®
Pairing Your Phone
Press and release the HFL Talk button before you give a command.
1
Enable “Discovery” or “Search” mode on
your Bluetooth-compatible phone.
5
Enter the code from step 4 on your
phone.
Was pairing successful?
Has a phone been paired to the system
before?
The system gives you
information about
pairing a phone for
the first time.
4
6
YES
NO
2
Say “Phone
setup.”
3
Say “Pair.”
HFL gives you a four-digit pairing code.
This code also appears on the MID.
HFL searches for your phone, and you must
search for a Bluetooth device from your
phone. When HFL finds your phone, your
phone prompts you to connect to HFL.
Was connection successful?
NO
NO
YES
YES
Repeat step 5.
HFL asks you to name the phone. For
example, say “Mary’s phone.”
Your phone is now paired to HFL. The
system exits out of the HFL menu.
AcuraLink may display a connection
setup screen after the pairing process,
which is necessary for this feature to
work. See the AcuraLink section for
more information.
For more information or troubleshooting, call
HFL consumer support at (888) 528-7876,
visit www.acura.com/handsfreelink, or see
your owner’s manual for details.
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:03 PM
Page b3
Making a Call
1. Press the HFL
Talk button.
2. Say “Call” and
the desired
phone number.
3. Press the HFL
Talk button and
say “Call” or “Dial”
to continue.
4. The call is
connected and
heard through
the speakers.
Receiving a Call
1. A notification is heard, and
“INCOMING CALL” and
the phone number appear
on the MID.
2. Press the HFL Talk
button to accept the call.
2010 TSX
3. Press the HFL Back button
to decline or end the call.
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:03 PM
Page c3
2010 TSX
Navigation (if equipped)
Entering a Destination Using Voice Control
Press and release the NAVI Talk button before you give a command.
1
Say “Display menu.”
2
Say “Address.”
3
Say “City” (or “Change state” if
necessary).
4
Say the name of the city you want, or
say “Current city” to select the city
currently shown.
5
A list of city names appears. Say
the number listed next to the city you
want to select.
6
Say the street name. Do not include
the direction (N, S, E, W) or type
(St., Ave., Blvd., etc.).
7
A list of street names appears. Say
the number listed next to the street
you want to select.
8
Say the entire street address number.
For example, “1-2-5-0.”
9
The system calculates the route
and displays the “Calculate route to”
screen. Say “OK” to set the route.
Note: Entering a destination can also be done
manually with the Interface Dial from the Menu screen.
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:04 PM
Page d3
Entering a Destination Using the “Find Nearest” Command
Try these simple steps to find a nearby point of interest, such as a gas station, movie theater, restaurant, etc.
Press and release the NAVI Talk button before you give a command.
1. Say “Find nearest ATM.”
3. Say the number you want to select.
2. A list of the nearest ATMs in your area
is displayed by shortest distance to
destination.
4. The system calculates the route and
displays the “Calculate route to” screen.
Say “OK” to set the route.
2010 TSX
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:04 PM
Page e3
2010 TSX
Commonly Used Voice Commands
Here are some examples of commonly used voice commands. Try some of these to familiarize yourself with
the voice command system.
Press and release the NAVI Talk button before you give a command.
Looking for Restaurants in Your Location
Say a command like “Display Chinese restaurants” to
see restaurant icons appear on the map.
Adjusting Vehicle’s Climate Setting
Say a command like “Air conditioner on” and “Fan
speed 4” to achieve a comfortable climate setting.
Making Audio Selections
Say a command like “Radio 97.1 FM” or “CD play
track 5” to select that station or song.
Getting Estimated Distance to Destination
After a destination is entered, say “How far to
destination?” to hear the remaining distance.
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:04 PM
Page f3
Commonly Used Voice Commands (continued)
Press and release the NAVI Talk button before you give a command.
General Commands
Navigation Commands
(Accepted on most screens)
• Display map
• Display menu
• Setup
(Accepted on map screen
after a destination is entered)
• Information
• Display audio screen
• What time is it?
• How long/far to the destination?
• Display destination
• Display entire route
Find Place Commands
Display Commands
(Accepted on map screen)
• Find nearest:
- ATM
- gas station
- Mexican
restaurant
- post office
- bank
- Acura dealer
- airport
- hospital
(Accepted on map screen)
• Display (or hide):
- ATM
- gas station
- Mexican
restaurant
- post office
2010 TSX
• Display north up/
heading up
• Zoom in/out
• Go home
• Display current
location
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:04 PM
Page g3
2010 TSX
Commonly Used Voice Commands (continued)
Press and release the NAVI Talk button before you give a command.
Audio Commands
(Accepted on most screens)
• Radio on
• Radio # FM/AM
• Radio preset
1/2/3/4/5/6
• XM channel #
•
•
•
•
•
XM preset 1/2/3/4/5/6
CD play
CD play track/disc #
CD skip forward/back
Auxiliary (AUX) play
Setup Commands
(Accepted on the setup screen)
• Brightness up/down • Interface dial
feedback on/off
• Volume up/down/
• Guidance prompts
min/max/off
min/max/normal
Climate Control Commands
(Accepted on most screens)
• Fan speed up/down
• Air conditioner
• Temperature #
on/off
degrees (# = 57–87)
• Rear defrost on/off
• Temperature max
• Climate control
hot/cold
recirculate/fresh air
Help Commands
(Accepted on most screens)
• Help (list of available commands for current
screen)
• Voice command help (list of all available
navigation, audio, and climate control
commands)
10 TSX ATG_3ab:ExtraPages.qxd
3/20/2009
2:04 PM
Page h3
AcuraLink Real-Time TrafficTM *
Provides continuously updated info, including traffic speed, incidents, and construction in major metro areas.
Press and release the NAVI Talk button before you give a command.
Displaying Traffic Information
Say “Display traffic”** to view highway flow data.
Displaying Traffic Incidents
Say “Display traffic incidents”** to view a list of
incidents in your area or on your specific route,
which are listed by distance from your current
position.
Traffic Flow Data
Heavy traffic
Moderate traffic
Free-flow traffic
Incident Icons
NOTE: Traffic flow and incident icons can only
be displayed on map scales of 5 miles (8 km)
or less.
Accident
Construction
Congestion
Road Closed
* Subscription-based service through Sirius XM Radio® (free 90-day trial upon vehicle purchase)
** You can also display this information manually using the Interface Dial from the Map screen.
2010 TSX
10 TSX ATG_Base:Base
3/20/2009
2:02 PM
Page 4
2010 TSX
AcuraLink Real-Time WeatherTM *
Provides current weather conditions, warnings, and forecasts in major metro areas.
Displaying Weather Icons
Checking Weather Forecasts and Warnings
Press and release the NAVI Talk button
before you give a command.
1. Say “Display
information.”
Say “Display weather”** to view weather icons
for each city. These are available on all map
scales.
2. Say “Weather
information.”
To view the weather
forecast: say “Current
position” or “City
vicinity.”
Clear
Cloudy
Rain
Partly
cloudy
Fog
Snow
To view weather
warnings: say “Warning
list sorted by distance.”
* Subscription-based service through Sirius XM Radio® (free 90-day trial upon vehicle purchase)
** You can also display this information manually using the Interface Dial from the Map screen.
Voice Command/
HFL/Navigation
10 TSX ATG_Base:Base
3/20/2009
2:02 PM
Page 5
AcuraLink®
AcuraLink® Messages
Acura periodically sends you messages on vehicle features, recall and safety information, maintenance
reminders, and diagnostic information.
New Messages
1. When you receive a new
message, an envelope icon
appears on the screen.
2. Push ENTER on the
Interface Dial to bring up
the Map menu. Select
New Messages.
3. Select the message to
hear it read aloud.
View All Messages
Press and release the NAVI Talk button before you give a command.
1. Say “Display information.”
2. Say “Messages” and a list of
messages appears.
2010 TSX
3. Say the number of the
message you want to hear.
10 TSX ATG_Base:Base
3/20/2009
2:02 PM
Page 6
2010 TSX
Schedule a Dealer Appointment
Set up dealer appointments when you receive a maintenance minder or product update message.
Register at the My Acura website (www.myacura.com), and make sure your Bluetooth-compatible phone
is paired and correctly set up (see Pairing Your Phone).
1. Using the Interface Dial, open the
maintenance or product update message.
2. Select “Schedule Dealer Appt.”
3. The system searches for the next available
appointment at your dealer. Select “Confirm
Appointment” if you are satisfied with the date.
NOTE: If you are not satisfied with the available
date, use the Call option to call your dealer directly.
4. Select “OK” to set the appointment.
AcuraLink
10 TSX ATG_Base:Base
3/20/2009
2:02 PM
Page 7
HomeLink®/Fuel
Fill Door
HomeLink®
The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home security systems.
Training a Button
1
2
Retraining a Button
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
3
a
YES
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO
1
Does the device (garage door opener) work?
NO
4
Does the HomeLink indicator (LED) blink at a
NO
Press and hold the programmed
HomeLink button for about a
second.
Press and hold
the HomeLink
button again.
YES
Training
complete
HomeLink indicator
HomeLink LED
flashes for 2 seconds, remains on.
then remains on.
a
b
YES
5
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
2010 TSX
Press and hold the desired
HomeLink button until the HomeLink
indicator begins to flash slowly.
Indicator remains
on for about 25
seconds (standard
transmitter).
2
Indicator flashes rapidly
for 2 seconds, then
remains on for about 23
seconds (rolling code
transmitter).
When the indicator begins to flash
slowly, continue to hold the
HomeLink button and follow steps
1– 4 under Training a Button.
Erasing Codes
To erase codes stored in all buttons,
press and hold the two outer buttons
until the HomeLink indicator begins to
flash (about 10 to 20 seconds), then
release the buttons.
If you sell the vehicle, make sure to
erase all codes.
If you have any problems programming
HomeLink, see the owner's manual included with
the device you are trying to program, call
HomeLink at (800) 355-3515 or visit
www.homelink.com.
10 TSX ATG_Base:Base
3/20/2009
2:03 PM
Page 8
2010 TSX
Fuel Fill Door
The vehicle has an easy to use locking fuel door that keeps your fuel cap secure.
Opening the Fuel Fill Door
When you unlock the driver’s door,
the fuel door unlocks.
Closing the Fuel Fill Door
To close, push the fuel door flush
to the body.
To open, push and release the fuel door
until it opens slightly. Then open fully.
When you lock the driver’s door,
the fuel door locks.
HomeLink®/Fuel
Fill Door
10 TSX ATG_Base:Base
3/20/2009
2:03 PM
Page 9
Advanced Audio
Components
Bluetooth® Audio
Plays audio files from your compatible phone through your vehicle’s audio system.
Playing Bluetooth Audio Files
1. Make sure your phone is on and paired to
HandsFreeLink (See HandsFreeLink).
2. Press the AUDIO button and press the AUX
button repeatedly until “Bluetooth Audio”
appears.
Skipping Bluetooth Audio Files
There are three ways to skip through audio files:
Press () or () on the audio control panel.
Move the selector knob to the left or right.
3. Press “play” on your phone; sound is
redirected to the audio system.
2010 TSX
10 TSX ATG_9ab:ExtraPages.qxd
3/20/2009
2:04 PM
Page a9
2010 TSX
Skipping Bluetooth Audio Files (continued)
Press (+) or (-) on the remote audio controls.
Audio Options
1. Press the AUDIO button, then press the selector knob down to
display the Audio Menu.
2. Turn the selector knob to select
either RESUME/PAUSE or
SOUND, then press ENTER.
10 TSX ATG_9ab:ExtraPages.qxd
3/20/2009
2:04 PM
Page b9
Playing an iPod® or USB Flash Memory Device
Some CD player controls also operate an iPod or USB flash memory device.
Connecting and Beginning Play
1. Open the center console, and pull out the
USB adapter cable.
3. Press the AUX button to begin playing.
USB
Adapter
Cable
USB Connector
2. Connect the USB connector to your iPod
dock connector or flash drive.
2010 TSX
10 TSX ATG_Back Inside:Inside Back
3/20/2009
2:05 PM
Page 10
2010 TSX
The Note Function (models with navigation)
Use the Note function to store up to 30 ten-second recordings of songs and song information from XM
Radio.
1. To record a song sample, press and hold the
XM button for about 2 seconds.
3. Turn the selector knob to select NOTE, then
press ENTER.
2. To replay stored information, press the
AUDIO button, and then push the selector
knob down.
4. Turn the selector knob to select a sound file, then
press ENTER. The selected song plays.
Advanced Audio
Components
Acura ATG_US.qxd:Acura QSG_US.qxd
4/13/09
3:40 PM
Page 6
About This Advanced Technology Guide
Fuel Recommendation
This Advanced Technology Guide has been prepared to help you
get quickly acquainted with your new Acura, and to provide reference instructions on driving controls and convenience items.
• Use only unleaded gasoline of
91 octane or higher.
• Some gasoline in North America
contains MMT, a manganese-based
fuel additive. Prolonged and consistent
use of gasoline containing MMT can
deteriorate your vehicle’s performance,
fuel economy, and the emissions
control system. Always use MMT-free
gasoline if alternatives exist. Failures
caused by use of gasoline containing
MMT may not be covered under
warranty.
However, this guide is not intended as a substitute for the
Owner’s Manual. For complete information on operating the
vehicle safely, please refer to the Owner’s Manual.
As with the Owner’s Manual, this guide covers all models of the
Acura TSX. Therefore, you may find descriptions of equipment and
features that are not on your particular model.
Safety Reminder
Your vehicle is equipped with airbags. Airbags do not replace
your seat belts; they add to the protection offered by seat belts.
Airbags can help protect you in some types of collisions, but they
do not provide protection in all collisions.
Always make sure you and your passengers wear seat belts, and
that young children are properly secured in a child seat or
booster in the rear seat. Never place an infant seat in the front
passenger’s seat as the force of a deploying airbag can seriously
injure an infant.
31TL1Q10
00X31-TL1-Q100
• For further important information on
fuel and lubricants for your car and
information on gasoline that does
not contain MMT, contact your
dealer or visit Owner Link at
www.acura.com.
2010 Acura TSX Advanced Technology Guide
© 2009 American Honda Co., Inc. - All Rights Reserved
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising