Panel Enclosures

Type 4 Panel Enclosures

JIC Enclosures Type 4 Lift-Off Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

138-139

JIC Enclosures Type 4 Continuous Hinge Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

140-141

JIC Enclosures Type 4 JIC Continuous Hinge Cover Quarter-Turn Latches

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

142-143

Wall-Mount Enclosures Type 4 Single-Door

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

144-146

Wall-Mount Enclosures Type 4 Premier

Series Quarter-Turn Latches

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

147-149

Wall-Mount Enclosures Type 4 Premier

Series Flush-Mount Quarter-Turn Latches

. . . . . . . . . . . . . . . .

150-151

Wall-Mount Enclosures Type 12 Premier

Series Double-Door Quarter-Turn Latches

. . . . . . . . . . . . . .

152-153

Premier

Series Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

154-159

Wall-Mount Enclosures Type 4 Single-Door 3-Point Locking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

160-161

Wall-Mount Enclosures Type 4 Double-Door 3-Point Locking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

162-163

Floor-Mounted Enclosures Type 4 Double-Door Floor-Standing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

164-165

Floor-Mounted Enclosures Type 4 Double-Door Floor-Standing Quarter-Turn Latches

. . . . . . . . . . . . . . .

166-167

Ground-Mount Enclosures Type 4 Double-Door Floor-Standing 3-Point Locking

. . . . . . . . . . . . . . . . . . . . .

168-169

Ground-Mount Enclosures Type 4 Free-Standing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

170-171

Ground-Mount Enclosures Type 4 Free-Standing Quarter-Turn Latches

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

172-173

Ground-Mount Enclosures Type 4 Free-Standing 3-Point Locking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

174-175

Ground-Mount Enclosures Type 4 EnviroShield™ Free-Standing 3-Point Locking

. . . . . . . . . . . . . . . . . . .

176-177

Free-Standing Enclosure Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

178-190

137

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

JIC Enclosures

Type 4 Lift-Off Cover

Data Sheet

Seamless poured in-place gasket

Application

• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards

• UL 508 listed, Type 4, Type 12 and Type 13

• CSA C22.2 No.94 certified, Type 4, Type 12 and Type 13

• Conforms to NEMA standard for Type 4,

Type 12 and Type 13

• Conforms to JIC standard EGP-1-1967

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Panels

• JIC terminal strap kit

• JIC terminal strip kit

• Terminal blocks

• Touch-up paint

• See Accessories section

Construction

• Enclosure and cover are fabricated from (16) gauge steel

• All continuous welded seams are finished smooth

• Cover is secured to the body with easy to operate stainless steel screw clamps mounted on all four sides

• Cover has a seamless poured in-place gasket

• Ground stud provided on cover

• #10-32 weldnuts are provided for mounting optional panel on

6” x 4” and larger enclosures

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DC0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

138

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

JIC Enclosures

Type 4 Lift-Off Cover

Illustration Sheet and Catalog Number

Enclosure

Catalog Number

443-4LC

643-4LC

863.5-4LC

664-4LC

1084-4LC

12105-4LC

14126-4LC

16146-4LC

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

4.00 x 4.00 x 3.00

6.00 x 4.00 x 3.00

8.00 x 6.00x x 3.50

6.00 x 6.00 x 4.00

102 x 102 x 76

152 x 102 x 76

203 x 152 x 89

152 x 152 x 102

10.00 x 8.00 x 4.00

254 x 203 x 102

12.00 x 10.00 x 5.00

305 x 254 x 127

14.00 x 12.00 x 6.00

356 x 305 x 152

16.00 x 14.00 x 6.00

406 x 356 x 152

in.

D mm

E in.

mm in.

F mm

-

-

-

-

2.00

51 2.00

51

3.00

76 2.00

51

-

-

2.00

51

3.00

76 3.00

76 -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.00

3.00

3.00

3.00

51

76

76

76

Panel

Catalog Number

Painted

-

AW64P

AW86P

AW66P

AW108P

AW1210P

AW1412P

AW1614P

Conductive

-

AW64GP

AW86GP

AW66GP

AW108GP

AW1210GP

AW1412GP

AW1614GP

Panel Size

Height x Width in.

mm

-

4.87 x 2.87

6.87 x 4.87

4.87 x 4.87

-

124 x 73

174 x 124

124 x 124

8.87 x 6.87

10.87 x 8.87

225 x 174

276 x 225

12.87 x 10.87

327 x 276

14.87 x 12.87

378 x 327

443-4LC

643-4LC

664-4LC

A

D

F

E

B

F

∅ .31

(8) mounting hole (4PL)

A-1.00

(25)

B-1.00

(25)

A-1.75

(44)

A+.75

(19) weldnut

(4PL) B-2.00

(51)

B-1.75

(44)

Front View

mounting feet clamp

Side View

C

C-.46

(12)

Cover Clamp

Layout

optional panel

863.5-4LC

1084-4LC

12105-4LC

14126-4LC

16146-4LC

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

139

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

JIC Enclosures

Type 4 Continuous Hinge Cover

Data Sheet

Seamless poured in-place gasket

Application

• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards

• UL 508 listed, Type 4, Type 12 and Type 13

• CSA C22.2 No.94 certified, Type 4, Type 12 and Type 13

• Conforms to NEMA standard for Type 4,

Type 12 and Type 13

• Conforms to JIC standard EGP-1-1967

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Panels

• JIC terminal strap kit

• JIC terminal strip kit

• Terminal blocks

• Touch-up paint

• See Accessories section

Construction

• Enclosure and cover are fabricated from (16) gauge steel

• All continuous welded seams are finished smooth

• Cover is secured to the body with a continuous hinge on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side

• Stainless steel hinge pin

• Cover has a seamless poured in-place gasket

• Ground stud provided on cover

• #10-32 weldnuts are provided for mounting optional panel on

6” x 4” and larger enclosures

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DC0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

140

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

JIC Enclosures

Type 4 Continuous Hinge Cover

Illustration Sheet and Catalog Number

Enclosure Enclosure Size

Height x Width x Depth

A x B x C in.

mm

Catalog Number

443-4CHC

643-4CHC

863.5-4CHC

644-4CHC

664-4CHC

1084-4CHC

12105-4CHC

1086-4CHC

12126-4CHC

14126-4CHC

16146-4CHC

4.00 x 4.00 x 3.00

6.00 x 4.00 x 3.00

8.00 x 6.00 x 3.50

102 x 102 x 76

152 x 102 x 76

203 x 152 x 89

6.00 x 4.00 x 4.00

152 x 102 x 102

6.00 x 6.00 x 4.00

152 x 152 x 102

10.00 x 8.00 x 4.00

254 x 203 x 102

12.00 x 10.00 x 5.00

305 x 254 x 127

10.00 x 8.00 x 6.00

254 x 203 x 152

12.00 x 12.00 x 6.00

305 x 305 x 152

14.00 x 12.00 x 6.00

356 x 305 x 152

16.00 x 14.00 x 6.00

406 x 356 x 152

in.

D mm

-

-

2.00

51

-

-

2.00

51

3.00

76

-

-

2.00

51

3.00

76

3.00

76

3.00

76

in.

E mm

-

-

-

-

2.00

51

3.00

76

-

3.00

76

3.00

76

-

-

-

-

-

-

-

-

Panel

Catalog Number

Steel

-

AW64P

AW86P

AW64P

AW66P

AW108P

AW1210P

AW108P

AW1212P

AW1412P

AW1614P

Conductive

-

AW6G4P

AW86GP

AW64GP

AW66GP

AW108GP

AW1210GP

AW108GP

AW1212GP

AW1412GP

AW1614GP

Panel Size

Height x Width in.

mm

-

4.87 x 2.87

6.87 x 4.87

-

124 x 73

174 x 124

4.87 x 2.87

4.87 x 4.87

124 x 73

124 x 124

8.87 x 6.87

225 x 174

10.87 x 8.87

276 x 225

8.87 x 6.87

225 x 174

10.87 x 10.87

276 x 276

12.87 x 10.87

327 x 276

14.87 x 12.87

378 x 327 weldnut

(4PL)

B

A+.75

(19)

A-1.75

(44) continuous hinge

A-1.00

(25)

B-1.00

(25)

D

∅ .31

(8) mounting hole (4PL)

C

C-.46

(12)

A

E

D mounting feet clamp

Side View

B-2.00

(51)

B-1.75

(44)

Front View

optional panel

Cover Clamp

Layout

443-4CHC

643-4CHC

644-4CHC

664-4CHC

863.5-4CHC

1084-4CHC

1086-4CHC

12105-4CHC

12126-4CHC

14126-4CHC

16146-4CHC

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

141

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

JIC Enclosures

Type 4 Continuous Hinge Cover with Quarter-Turn Latches

Data and Illustration Sheet

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Panels

• Swing-out panel kits

• JIC terminal kits

• Window kits

• Locks and latches

Construction

• Enclosure and cover are fabricated from (16) Gauge Steel

• All continuous welded seams are finished smooth

• Continuous hinge with stainless steel hinge pin

• Slotted quarter-turn flush latch(es)

• Cover has a seamless poured in-place gasket

• Ground stud provided on cover

• #10-32 weldnuts are provided for mounting optional panel on 6” x 4” and larger enclosures

• External mounting feet

Application

• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards

• UL 508 Listed, Type 4, 12

• CSA C22.2 No.94 certified, Type 4, 12

• Conforms to NEMA Standards for Type 3, 4, 12

• Conforms to JIC standards EGP-1-1967

Discount Schedule: C2

Subclass: DC0

B

∅ .31

(8) mounting hole (4PL)

C

A+.75

(19)

A-1.75

(44) continuous hinge

B-1.00

(25)

A-1.00

(25) quarter turn latches

D omit top & bottom latches when A is 10 or less

E

A omit center latch when

A is 12 or greater

C-.46

(12) optional panel

D weldnut

(4PL)

Front View

B-2.00

(51)

B-1.75

(44) mounting feet

Side View

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

142

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Catalog Number

443-4QT

643-4QT

863.5-4QT

864-4QT

444-4QT

644-4QT

664-4QT

884-4QT

1084-4QT

1264-4QT

12105-4QT

866-4QT

886-4QT

1086-4QT

10106-4QT

12106-4QT

12126-4QT

1486-4QT

14126-4QT

16106-4QT

16146-4QT

12108-4QT

14128-4QT

16148-4QT

161410-4QT

Type 4 Panel Enclosures

JIC Enclosures

Type 4 Continuous Hinge Cover with Quarter-Turn Latches

Illustration Sheet and Catalog Number

Enclosure Enclosure Size

Height x Width x Depth

A x B x C in.

mm

4 x 4 x 3

6 x 4 x 3

8 x 6 x 3.5

8 x 6 x 4

4 x 4 x 4

6 x 4 x 4

6 x 6 x 4

8 x 8 x 4

10 x 8 x 4

12 x 6 x 4

12 x 10 x 5

8 x 6 x 6

8 x 8 x 6

10 x 8 x 6

10 x 10 x 6

12 x 10 x 6

12 x 12 x 6

14 x 8 x 6

14 x 12 x 6

16 x 10 x 6

16 x 14 x 6

12 x 10 x 8

14 x 12 x 8

16 x 14 x 8

16 x 14 x 10

101 x 101 x 76

152 x 101 x 76

203 x 152 x 89

203 x 152 x 101

101 x 101 x 101

152 x 101 x 101

152 x 152 x 101

203 x 203 x 101

254 x 203 x 101

305 x 152 x 101

305 x 254 x 127

203 x 152 x 152

203 x 203 x 152

254 x 203 x 152

254 x 254 x 152

305 x 254 x 152

305 x 305 x 152

355 x 203 x 152

355 x 305 x 152

406 x 254 x 152

406 x 355 x 152

305 x 254 x 203

355 x 305 x 203

406 x 355 x 203

406 x 355 x 254

in.

-

-

-

-

-

-

3

3

-

-

-

-

-

-

-

3

3

3

3

3

3

3

3

3

3

D mm

-

-

-

-

-

-

76

76

-

-

-

-

-

-

-

76

76

76

76

76

76

76

76

76

76

5

5

4

4

4

5

-

-

3

3

4

2

2

3

4

-

-

-

-

-

-

-

-

-

-

in.

E mm

101

101

127

127

101

127

-

-

51

76

101

101

51

76

76

-

-

-

-

-

-

-

-

-

-

Panel

Catalog

Number

-

AW64P

AW86P

AW86P

-

AW64P

AW66P

AW88P

AW108P

AW126P

AW1210P

AW86P

AW88P

AW108P

AW1010P

AW1210P

AW1212P

AW148P

AW1412P

AW1610P

AW1614P

AW1210P

AW1412P

AW1614P

AW1614P

Conductive

Catalog

Number

-

AW64GP

AW86GP

AW86GP

-

AW64GP

AW66GP

AW88GP

AW108GP

-

AW1210GP

AW86GP

AW88GP

AW108GP

AW1010GP

AW1210GP

AW1212GP

-

AW1412GP

-

AW1614GP

AW1210GP

AW1412GP

AW1614GP

AW1614GP

Panel Size

Panel

Height x Width in.

mm

-

4.87 x 2.87

6.87 x 4.87

6.87 x 4.87

-

4.87 x 2.87

4.87 x 4.87

6.87 x 6.87

8.87 x 6.87

10.87 x 4.87

10.87 x 8.87

6.87 x 4.87

6.87 x 6.87

8.87 x 6.87

8.87 x 8.87

10.87 x 8.87

276 x 225

10.87 x 10.87

276 x 276

12.87 x 6.87

327 x 174

12.87 x 10.87

327 x 276

14.87 x 8.87

377 x 225

14.87 x 12.87

377 x 327

10.87 x 8.87

276 x 225

12.87 x 10.87

327 x 276

14.87 x 12.87

377 x 327

14.87 x 12.87

377 x 327

-

123 x 73

174 x 123

174 x 123

-

123 x 73

123 x 123

174 x 174

225 x 174

276 x 123

276 x 225

174 x 123

174 x 174

225 x 174

225 x 225

Quarter-Turn Latch

Layout

443-4QT

643-4QT

863.5-4QT

864-4QT

444-4QT

644-4QT

664-4QT

1264-4QT

12105-4QT

12106-4QT

12126-4QT

1486-4QT

14126-4QT

884-4QT

866-4QT

886-4QT

1084-4QT

1086-4QT

10106-4QT

16106-4QT

16146-4QT

12108-4QT

14128-4QT

16148-4QT

161410-4QT

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

143

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Single-Door

Data Sheet

Application

• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards

• UL 508 listed, Type 4, Type 12 and Type 13

• CSA C22.2 No.94 certified, Type 4, Type 12 and Type 13

• Conforms to NEMA standard for Type 4,

Type 12 and Type 13

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Panels

• NEMA terminal strap kit

• Terminal blocks

• Door lock kit

• Floor stand kit

• Touch-up paint

• See Accessories section

Construction

• Enclosure and door are fabricated from code gauge steel,

(see table, page 146)

• All continuous welded seams are finished smooth

• Doors are secured to the body with a heavy-duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides

• Ground stud provided on door

• Formed lip around enclosure opening diverts liquids and contaminants

• Each door has a padlock hasp with sealing hole provision

• Print pocket provided

• Door has a seamless poured in-place gasket

• .375-16 collar studs are provided for mounting optional panel

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DF0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

144

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Single-Door

Illustration Sheet

See page 146 for dimensions

B

B (**B)

3.50

(89)

∅ .44

(11) mounting hole (4PL)

A+1.25

(32)

A print pocket

(supplied)

B-2.75

(70)

A-2.75

(70)

CL padlock hasp door clamp

(see note on this page)

3.50

(89)

CL

Front View

B-4.75

(121) mounting feet

C

C

X

X

Side View

optional back panel

A-4.75

(121)

CL

.375-16 collar stud

(omit center studs where "A" is less than 36)

.375-16 collar stud

(omit center studs where "B" is less than 36)

CL

Section X-X

Notes:

Dimensions: **B = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. Clamps are mounted along three sides of the enclosure door.

Spacing between clamps along side opposite the hinge does not exceed 15 inches.

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

145

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Single-Door

Catalog Number

Enclosure

Catalog Number

242010-4

302410-4

363010-4

483010-4

483610-4

603610-4

302412-4

363012-4

30308-4

36248-4

36308-4

42308-4

42368-4

48368-4

60368-4

201610-4

483612-4

363016-4

483616-4

603616-4

30246-4

36246-4

16128-4

20168-4

20208-4

20248-4

24208-4

24248-4

24308-4

30208-4

30248-4

16126-4

16166-4

16206-4

20166-4

20206-4

24126-4

24166-4

24206-4

24246-4

30206-4

See page 145 for drawings

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

30.00 x 30.00 x 8.00

36.00 x 24.00 x 8.00

36.00 x 30.00 x 8.00

42.00 x 30.00 x 8.00

42.00 x 36.00 x 8.00

48.00 x 36.00 x 8.00

60.00 x 36.00 x 8.00

20.00 x 16.00 x 10.00

24.00 x 20.00 x 10.00

30.00 x 24.00 x 10.00

36.00 x 30.00 x 10.00

48.00 x 30.00 x 10.00

48.00 x 36.00 x 10.00

60.00 x 36.00 x 10.00

30.00 x 24.00 x 12.00

36.00 x 30.00 x 12.00

48.00 x 36.00 x 12.00

36.00 x 30.00 x 16.00

48.00 x 36.00 x 16.00

60.00 x 36.00 x 16.00

16.00 x 12.00 x 6.00

16.00 x 16.00 x 6.00

16.00 x 20.00 x 6.00

20.00 x 16.00 x 6.00

20.00 x 20.00 x 6.00

24.00 x 12.00 x 6.00

24.00 x 16.00 x 6.00

24.00 x 20.00 x 6.00

24.00 x 24.00 x 6.00

30.00 x 20.00 x 6.00

30.00 x 24.00 x 6.00

36.00 x 24.00 x 6.00

16.00 x 12.00 x 8.00

20.00 x 16.00 x 8.00

20.00 x 20.00 x 8.00

20.00 x 24.00 x 8.00

24.00 x 20.00 x 8.00

24.00 x 24.00 x 8.00

24.00 x 30.00 x 8.00

30.00 x 20.00 x 8.00

30.00 x 24.00 x 8.00

762 x 762 x 203

914 x 610 x 203

914 x 762 x 203

1067 x 762 x 203

1067 x 914 x 203

1219 x 914 x 203

1524 x 914 x 203

508 x 406 x 254

610 x 508 x 254

762 x 610 x 254

914 x 762 x 254

1219 x 762 x 254

1219 x 914 x 254

1524 x 914 x 254

762 x 610 x 305

914 x 762 x 305

1219 x 914 x 305

914 x 762 x 406

1219 x 914 x 406

1524 x 914 x 406

406 x 305 x 152

406 x 406 x 152

406 x 508 x 152

508 x 406 x 152

508 x 508 x 152

610 x 305 x 152

610 x 406 x 152

610 x 508 x 152

610 x 610 x 152

762 x 508 x 152

762 x 610 x 152

914 x 610 x 152

406 x 305 x 203

508 x 406 x 203

508 x 508 x 203

508 x 610 x 203

610 x 508 x 203

610 x 610 x 203

610 x 762 x 203

762 x 508 x 203

762 x 610 x 203

Gauge

14

14

14

14

16

14

14

14

14

14

14

14

14

14

14

16

14

14

14

14

16

16

16

14

14

14

14

14

14

16

16

16

16

14

14

16

16

16

16

16

16

Painted

AW2420P

AW3024P

AW3630P

AW4830P

AW4836P

AW6036P

AW3024P

AW3630P

AW3030P

AW3624P

AW3630P

AW4230P

AW4236P

AW4836P

AW6036P

AW2016P

AW4836P

AW3630P

AW4836P

AW6036P

AW3024P

AW3624P

AW1612P

AW2016P

AW2020P

AW2420P

AW2420P

AW2424P

AW3024P

AW3020P

AW3024P

AW1612P

AW1616P

AW2016P

AW2016P

AW2020P

AW2412P

AW2416P

AW2420P

AW2424P

AW3020P

Panel Panel Size

Height x Width in.

mm

26.87 x 26.87

32.87 x 20.87

32.87 x 26.87

38.87 x 26.87

38.87 x 32.87

44.87 x 32.87

56.87 x 32.87

17.00 x 13.00

20.87 x 16.87

26.87 x 20.87

32.87 x 26.87

44.87 x 26.87

44.87 x 32.87

56.87 x 32.87

26.87 x 20.87

32.87 x 26.87

44.87 x 32.87

32.87 x 26.87

44.87 x 32.87

56.87 x 32.87

13.00 x 9.00

13.00 x 13.00

13.00 x 17.00

17.00 x 13.00

17.00 x 17.00

21.00 x 9.00

21.00 x 13.00

20.87 x 16.87

20.87 x 20.87

26.87 x 16.87

26.87 x 20.87

32.87 x 20.87

13.00 x 9.00

17.00 x 13.00

17.00 x 17.00

16.87 x 20.87

20.87 x 16.87

20.87 x 20.87

20.87 x 26.87

26.87 x 16.87

26.87 x 20.87

682 x 682

835 x 530

835 x 682

987 x 682

987 x 835

1140 x 835

1444 x 835

432 x 330

530 x 428

682 x 530

835 x 682

1140 x 682

1140 x 835

1444 x 835

682 x 530

835 x 682

1140 x 835

835 x 682

1140 x 835

1444 x 835

682 x 530

835 x 530

330 x 229

432 x 330

432 x 432

428 x 530

530 x 428

530 x 530

530 x 682

682 x 428

682 x 530

330 x 229

330 x 330

330 x 432

432 x 330

432 x 432

533 x 229

533 x 330

530 x 428

530 x 530

682 x 428

Conductive

AW3030GP

AW3624GP

AW3630GP

AW4230GP

AW4236GP

AW4836GP

AW6036GP

AW2016GP

AW2420GP

AW3024GP

AW3630GP

AW4830GP

AW4836GP

AW6036GP

AW3024GP

AW3630GP

AW4836GP

AW3630GP

AW4836GP

AW6036GP

AW3024GP

AW3624GP

AW1612GP

AW2016GP

AW2020GP

AW2420GP

AW2420GP

AW2424GP

AW3024GP

AW3020GP

AW3024GP

AW1612GP

AW1616GP

AW2016GP

AW2016GP

AW2020GP

--

AW2416GP

AW2420GP

AW2424GP

AW3020GP

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

146

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Premier

Series with Quarter-Turn Latches

Data Sheet and Catalog Number

Accessories

• Premier panels

• NEMA panel adapters

• Depth adjustment brackets

• Print pockets

• Security latch inserts

• Mounting foot kits

• EIA/TIA rack mounting angles

• Swing-out panels

• Padlockable or keyed handles

• See Accessories section, pages 154-159

Construction

• Enclosure and door are fabricated from code gauge steel (see tables, pages 147 & 148)

• All continuous welded seams are finished smooth

• Hardware kit provided contains grounding hardware,

.312-18 flanged hex nuts for panel mounting, and sealing washers for body mounting holes

Application

• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water

Standards

• UL 508 Listed, Type 4 and Type 12

• cUL Listed, Type 4 and Type 12

• Conforms to NEMA standard for Type 4 and Type 12

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Discount Schedule: C2

Subclass: TC0

Body Construction

• Body flange trough design is formed around body opening to divert liquid contaminants away from door opening

• Reduced width flange design increases enclosure opening

• Ground stud provided in enclosure body

• .312-18 collar studs are provided for mounting optional Premier panels

• Enclosure mounting holes in body provided for direct mounting or optional mounting feet

• Utility bracket provides wire management and accessory mounting options

Door Construction

• Doors are secured to the body with a unique spring-loaded hidden hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side

• Doors are easily removed and interchangeable

• Door has a seamless poured in-place gasket

• Door opens 170° for easy access

• Utility rail provides grounding, rigidity and wire management

• Window-door enclosures feature flush-mounted clear polycarbonate window

Enclosure

Catalog Number

Solid

Door

Window

Door

1084-SD

1086-SD

12106-SD

12126-SD

16126-SD

16166-SD

16206-SD

20166-SD

20206-SD

24166-SD

24206-SD

24246-SD in.

Enclosure

Size

A x B x C mm

-

-

10x8x4 254x203x102

10x8x6 254x203x152

-

12x10x6 305x254x152

12126-SDW

12x12x6 305x305x152

16126-SDW

16x12x6 406x305x152

-

16x16x6 406x406x152

-

16x20x6 406x508x152

20166-SDW

20x16x6 508x406x152

20206-SDW

20x20x6 508x508x152

-

24x16x6 610x406x152

24206-SDW

24x20x6 610x508x152

24246-SDW

24x24x6 610x610x152

Panel

Door/Body Catalog

Gauge Number

16/16

16/16

16/16

16/16

16/16

16/16

16/16

16/16

16/16

16/16

16/16

14/16

108P

108P

1210P

1212P

1612P

1616P

2016P

2016P

2020P

2416P

2420P

2424P

Panel Size

H x W in.

mm

Mounting

D x E in.

mm in.

Window

Size

F x G mm

8.00x6.00

203x152

8.00x6.00

203x152

8.50x6.37

216x162

8.50x6.37

216x162

10.00x8.00

254x203 10.50x8.37

267x213

10.00x10.00 254x254 10.50x10.37

267x264

-

-

-

8.25x7.00

-

-

-

210x178

14.00x10.00

356x254 14.50x10.37

368x264

14.00x14.00

356x356 14.50x14.37

368x365

12.25x7.00

-

311x178

-

14.00x18.00

356x457 14.50x18.37

368x467 -

18.00x14.00

457x356 18.50x14.37

470x365 16.25x11.00

413x279

18.00x18.00

457x457 18.50x18.37

470x467 16.25x15.00

413x381

22.00x14.00

559x356 22.50x14.37

572x365 -

22.00x18.00

559x457 22.50x18.37

572x467 20.25x15.00

514x381

22.00x22.00

559x559 22.50x22.37

572x568 20.25x17.62

514x448

Latch J

Qty.

in.

mm

1

1

1

1

1

1

1

1

1

2

1

1

5.00

127

5.00

127

6.00

152

6.00

152

8.00

203

8.00

203

8.00

203

10.00

254

10.00

254

5.00

127

5.00

127

5.00

127

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

147

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Premier

Series with Quarter-Turn Latches

Catalog Number

Enclosure

Catalog Number

Solid

Door

Window

Door in.

Enclosure

Size

A x B x C mm

16128-SD

16168-SD

16208-SD

20168-SD

20208-SD

20248-SD

24168-SD

24208-SD

24248-SD

24308-SD

30208-SD

30248-SD

30308-SD

36248-SD

36308-SD

16128-SDW

16x12x8 406x305x203

-

-

16x16x8

16x20x8

406x406x203

406x508x203

20168-SDW

20x16x8 508x406x203

20208-SDW

20x20x8 508x508x203

-

-

20x24x8 508x610x203

24x16x8 610x406x203

24208-SDW

24x20x8 610x508x203

24248-SDW

24x24x8 610x610x203

-

-

24x30x8 610x762x203

30x20x8 762x508x203

30248-SDW

30x24x8 762x610x203

-

30x30x8 762x762x203

-

-

36x24x8 914x610x203

36x30x8 914x762x203

36368-SD -

36x36x8 914x914x203

161210-SD 161210-SDW

16x12x10 406x305x254

161610-SD

162010-SD

-

-

16x16x10 406x406x254

16x20x10 406x508x254

201610-SD 201610-SDW

20x16x10 508x406x254

202010-SD 202010-SDW

20x20x10 508x508x254

202410-SD

241610-SD

-

-

20x24x10 508x610x254

24x16x10 610x406x254

242010-SD 242010-SDW

24x20x10 610x508x254

242410-SD 242410-SDW

24x24x10 610x610x254

243010-SD

302010-SD

-

-

24x30x10 610x762x254

30x20x10 762x508x254

302410-SD 302410-SDW

30x24x10 762x610x254

303010-SD -

30x30x10 762x762x254

362410-SD

363010-SD

-

-

36x24x10 914x610x254

36x30x10 914x762x254

363610-SD

423610-SD

482410-SD

483610-SD

-

-

-

-

36x36x10 914x914x254

42x36x10 1067x914x254

48x24x10 1219x610x254

48x36x10 1219x914x254

603610-SD -

60x36x10 1524x914x254

202012-SD 202012-SDW

20x20x12 508x508x305

242012-SD 242012-SDW

24x20x12 610x508x305

242412-SD 242412-SDW

24x24x12 610x610x305

302412-SD 302412-SDW

30x24x12 762x610x305

303012-SD -

30x30x12 762x762x305

362412-SD

363012-SD

-

-

36x24x12 914x610x305

36x30x12 914x762x305

363612-SD

423612-SD

482412-SD

483612-SD

-

-

-

-

36x36x12

42x36x12

48x24x12

48x36x12

914x914x305

1067x914x305

1219x610x305

1219x914x305

603612-SD -

60x36x12 1524x914x305

242416-SD 242416-SDW

24x24x16 610x610x406

363016-SD

483616-SD

-

-

36x30x16 914x762x406

48x36x16 1219x914x406

242420-SD 242420-SDW

24x24x20 610x610x508

302420-SD 302420-SDW

30x24x20 762x610x508

363020-SD -

36x30x20 914x762x508

Panel

Door/Body Catalog

Gauge Number

14/16

14/14

14/14

14/14

14/14

14/14

14/14

14/14

14/14

14/14

14/14

14/14

14/14

16/16

16/16

14/16

14/14

14/14

14/14

14/14

14/14

14/14

14/14

16/16

14/16

14/16

14/16

14/16

14/14

14/14

14/14

14/14

16/16

16/16

16/16

16/16

16/16

16/16

16/16

16/16

14/16

14/16

14/16

14/16

14/14

14/14

14/14

16/16

16/16

16/16

16/16

16/16

16/16

16/16

Panel Size in.

H x W mm

Mounting in.

D x E mm in.

Window

Size

F x G mm

2420P

2424P

3024P

3020P

3024P

3030P

3624P

3630P

3636P

1612P

1616P

2016P

2016P

2020P

2420P

2416P

2420P

2424P

3024P

3020P

3024P

3030P

3624P

3630P

1612P

1616P

2016P

2016P

2020P

2420P

2416P

14.00x10.00

356x254 14.50x10.37

368x264 12.25x7.00

14.00x14.00

356x356 14.50x14.37

368x365

14.00x18.00

356x457 14.50x18.37

368x467

-

-

311x178

-

-

18.00x14.00

457x356 18.50x14.37

470x365 16.25x11.00

413x279

18.00x18.00

457x457 18.50x18.37

470x467 16.25x15.00

413x381

18.00x22.00

457x559 18.50x22.37

470x568

22.00x14.00

559x356 22.50x14.37

572x365

-

-

-

-

22.00x18.00

559x457 22.50x18.37

572x467 20.25x15.00

514x381

22.00x22.00

559x559 22.50x22.37

572x568 20.25x17.62

514x448

22.00x28.00

559x711 22.50x28.37

572x721

28.00x18.00

711x457 28.50x18.37

724x467

-

-

-

-

28.00x22.00

711x559 28.50x22.37

724x568 26.25x17.62

667x448

28.00x28.00

711x711 28.50x28.37

724x721 -

34.00x22.00

864x559 34.50x22.37

876x568

34.00x28.00

864x711 34.50x28.37

876x721

-

-

-

-

34.00x34.00

864x864 34.50x34.37

876x873 -

14.00x10.00

356x254 14.50x10.37

368x264 12.25x7.00

14.00x14.00

356x356 14.50x14.37

368x365

14.00x18.00

356x457 14.50x18.37

368x467

-

-

-

311x178

-

-

18.00x14.00

457x356 18.50x14.37

470x365 16.25x11.00

413x279

18.00x18.00

457x457 18.50x18.37

470x467 16.25x15.00

413x381

18.00x22.00

457x559 18.50x22.37

470x568

22.00x14.00

559x356 22.50x14.37

572x365

-

-

-

-

22.00x18.00

559x457 22.50x18.37

572x467 20.25x15.00

514x381

22.00x22.00

559x559 22.50x22.37

572x568 20.25x17.62

514x448

22.00x28.00

559x711 22.50x28.37

572x721

28.00x18.00

711x457 28.50x18.37

724x467

-

-

-

-

28.00x22.00

711x559 28.50x22.37

724x568 26.25x17.62

667x448

28.00x28.00

711x711 28.50x28.37

724x721 -

34.00x22.00

864x559 34.50x22.37

876x568

34.00x28.00

864x711 34.50x28.37

876x721

-

-

-

-

6036P

2424P

3630P

4836P

2424P

3024P

3630P

3024P

3030P

3624P

3630P

3636P

4236P

4824P

4836P

3636P

4236P

4824P

4836P

34.00x34.00

864x864 34.50x34.37

876x873

40.00x34.00

1016x864 40.50x34.37 1029x873

46.00x22.00

1168x559 46.50x22.37 1181x568

46.00x34.00

1168x864 46.50x34.37 1181x873

-

-

-

-

-

-

-

-

6036P

58.00x34.00

1473x864 58.50x34.37 1486x873 -

2020P

18.00x18.00

457x457 18.50x18.37

470x467 16.25x15.00

413x381

2420P

22.00x18.00

559x457 22.50x18.37

572x467 20.25x15.00

514x381

2424P

22.00x22.00

559x559 22.50x22.37

572x568 20.25x17.62

514x448

28.00x22.00

711x559 28.50x22.37

724x568 26.25x17.62

667x448

28.00x28.00

711x711 28.50x28.37

724x721 -

34.00x22.00

864x559 34.50x22.37

876x568

34.00x28.00

864x711 34.50x28.37

876x721

34.00x34.00

864x864 34.50x34.37

876x873

40.00x34.00

1016x864 40.50x34.37 1029x873

46.00x22.00

1168x559 46.50x22.37 1181x568

46.00x34.00

1168x864 46.50x34.37 1181x873

-

-

-

-

-

-

-

-

-

-

-

-

58.00x34.00

1473x864 58.50x34.37 1486x873 -

22.00x22.00

559x559 22.50x22.37

572x568 20.25x17.62

514x448

34.00x28.00

864x711 34.50x28.37

876x721

46.00x34.00

1168x864 46.50x34.37 1181x873

-

-

-

-

22.00x22.00

559x559 22.50x22.37

572x568 20.25x17.62

514x448

28.00x22.00

711x559 28.50x22.37

724x568 26.25x17.62

667x448

34.00x28.00

864x711 34.50x28.37

876x721 -

J in.

mm

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

10.00

254

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

8.00

203

8.00

203

8.00

203

10.00

254

10.00

254

10.00

254

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

8.00

203

8.00

203

8.00

203

10.00

254

10.00

254

10.00

254

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

Latch

Qty.

2

3

3

3

2

2

2

2

3

1

1

2

2

3

3

3

2

2

2

3

2

2

3

2

2

2

2

1

2

2

2

1

1

1

1

2

1

1

1

2

2

2

2

1

2

2

2

1

1

1

1

1

1

1

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

148

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Premier

Series with Quarter-Turn Latches

Illustration Sheet

B

.700

(18)

B-1.75

(44)

C

X

J

A

A-1.75

(44)

A-2J

(when latch qty.=2)

A-2J/2

(when latch qty.=3)

A

Front View

X

Side View

1.16

(29)

Door clear

(B≥36”)

B-3.30

(84)

Door clear w/out

(B<36”)

B-2.48

(63)

Without Window

B

B-1.75

(44)

A

A-1.75

(44)

F

J

.750

(19)

A-2J

(when latch qty.=2)

D

.812

(21)

E

W

H

Section X-X

Front View

G

Mounting Holes

∅ .500

(13)

With Window

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

149

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Premier

Series Flush-Mount with Quarter-Turn Latches

Data Sheet

Application

• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against circulating and windblown dust, falling dirt, dripping non-corrosive liquids, rain, splashing water and hose directed water

Standards

• UL 508 Listed, Type 4 and Type 12

• cUL Listed, Type 4 and Type 12

• Conforms to NEMA standard for Type 4 and Type 12

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Premier panels

• Security latch inserts

• NEMA panel adapters

• Mounting foot kits

• Depth adjustment brackets

• EIA/TIA rack mounting angles

• Print pockets

• Swing-out panels

• Padlockable or keyed handles

• See Accessories section, pages 154-159

Construction

• Enclosure and door are fabricated from code gauge steel (see page 151)

• All continuous welded seams are finished smooth

• Hardware kit provided contains grounding hardware,

.312-18 flanged hex nuts for panel mounting, and sealing washers for body mounting holes

Body Construction

• Body flange trough design is formed around body opening to divert liquid contaminants away from door opening

• Reduced width flange design increases enclosure opening

• Ground stud provided in enclosure body

• .312-18 collar studs are provided for mounting optional Premier panels

• Enclosure mounting holes in body provided for direct mounting or optional mounting feet

• Utility bracket provides wire management and accessory mounting options

Door Construction

• Doors are secured to the body with a unique spring-loaded hidden hinge design on one side and slotted quarter-turn flush latch(es) on the opposite side

• Flush cover for recessed wall-mounting

• Doors are easily removed and interchangeable

• Door has a seamless poured in-place gasket

• Door opens 170° for easy access

• Utility rail provides grounding, rigidity and wire management

• Window-door enclosures feature flush-mounted clear polycarbonate window

Discount Schedule: C2

Subclass: TC0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

150

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Premier

Series Flush-Mount with Quarter-Turn Latches

Illustration Sheet and Catalog Number

Enclosure

Catalog Number

Solid

Door

12126-FM

16126-FM

20166-FM

20206-FM

24208-FM

24248-FM

30248-FM

Enclosure

Size in.

A x B x C mm

12x12x6 305x305x152

16x12x6 406x305x152

20x16x6 508x406x152

20x20x6 508x508x152

24x20x8 610x508x152

24x24x8 610x610x152

30x24x8 762x610x152

Panel

Door/Body Catalog

Gauge Number

16/16

16/16

16/16

16/16

16/16

14/16

14/16

1212P

1612P

2016P

2020P

2420P

2424P

3024P

Panel Size

H x W in.

mm

Mounting

D x E in.

mm

10.00x10.00

254x254 11.62x11.62

295x295

14.00x10.00

356x254 15.62x11.62

397x295

18.00x14.00

457x356 19.62x15.62

498x397

18.00x18.00

457x457 19.62x19.62

498x498

22.00x18.00

559x457 23.62x19.62

600x498

22.00x22.00

559x559 23.62x23.62

600x600

28.00x22.00

711x559 29.62x23.62

752x600

Latch

Qty.

1

2

2

1

1

1

1

in.

6.00

8.00

10.00

10.00

5.00

5.00

5.00

J mm

152

203

254

254

127

127

127

B-1.62

(41)

.750

(19)

.812

(21)

W

B+.64

(16)

B

A-1.50

(38)

H

Mounting Holes

∅ .281

(7)

B+3.33

(85)

∅ .500

(13)

Section X-X

.88

(22)

C

X

J

A+3.33

(85)

D

D-1.75

(44)

A-2J

(when latch qty.=2)

(omit center holes where

“A” is less than 30”)

A

A+.64

(16)

X

Front View

Solid Door

E-1.75

(44)

E

Side View

1.16

(29)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

151

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Panel Enclosures

Wall-Mount Enclosures

Type 12 Premier

Series Double-Door with Quarter-Turn Latches

Data Sheet

Application

• Houses electrical controls and instruments

• Protects against circulating and windblown dust, falling dirt and dripping non-corrosive liquids

Standards

• UL 508 Listed, Type 12

• cUL Listed, Type 12

• Conforms to NEMA standard for Type 12

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Premier panels

• NEMA panel adapters

• Depth adjustment brackets

• Print pockets

• Padlockable or keyed handles

• Security latch inserts

• Mounting foot kits

• See Accessories section, pages 154-159

Construction

• Enclosure and door are fabricated from code gauge steel

(see page 153)

• All continuous welded seams are finished smooth

• Hardware kit provided contains grounding hardware, .312-18 flanged hex nuts for panel mounting, and sealing washers fo body mounting holes

Body Construction

• Body flange trough design is formed around body opening to diverts liquid contaminants away from door opening

• Reduced width flange design increases enclosure opening

• Ground stud provided in enclosure body

• .312-18 collar studs are provided for mounting optional

Premier panels

• Enclosure mounting holes in body provided for direct mounting or optional mounting feet

• Utility bracket provides wire management and accessory mounting options

Door Construction

• Doors are secured to the body with a unique spring-loaded hidden hinge design on one side and slotted quarterturn flush latch(es) on the opposite side

• Doors are easily removed and interchangeable

• Door opens 170° for easy access

• Doors have a fixed, oil-resistant gasket

• Utility rail provides grounding, rigidity and wire management

Discount Schedule: C2

Subclass: TC0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

152

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Panel Enclosures

Wall-Mount Enclosures

Type 12 Premier

Series Double-Door with Quarter-Turn Latches

Illustration Sheet and Catalog Number

Enclosure

Catalog Number

Solid

Door

24428-TD

30488-TD

306012-TD

364812-TD

366012-TD

Enclosure

Size in.

A x B x C mm

24x42x8 610x1067x203

30x48x8 762x1219x203

30x60x12 762x1524x305

36x48x12 914x1219x305

36x60x12 914x1524x305

Panel

Door/Body Catalog

Gauge Number

14/14

14/14

14/14

14/14

14/14

2442P

3048P

3060P

4836P

6036P

Panel Size

H x W in.

mm

Mounting in.

D x E mm

22.00x40.00

559x1016 22.50x40.37

572x1026

28.00x46.00

711x1168 28.50x46.37

724x1178

28.00x58.00

711x1473 28.50x58.37

724x1483

34.00x46.00

864x1168 34.50x46.37

876x1178

34.00x58.00

864x1473 34.50x58.37

876x1483

Latch

Qty.

3

3

3

3

3

in.

J mm

5.00

127

5.00

127

5.00

127

5.00

127

5.00

127

A/2

J

B

B-1.75

(44)

.700

(18) C

X

A

A-1.75

(44)

A

X

Side View

1.16

(29)

.750

(19)

Door clear

B/2-6.50

(165)

Front View

Door clear

B/2-4.00

(102)

E

.812

(21)

W

D

H

Section X-X

Mounting Holes

∅ .500

(13)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

153

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Premier

Series Accessories

Discount Schedule: C2

Subclass: TD0

Panels

Premier panels can be installed in any Premier Series enclosure and are up to 20% larger than standard

NEMA panels. Panels above 24” are flanged.

Steel panels have a white polyester powder paint finish.

Stainless Steel sizes are available as shown in chart.

H

W

Galv

2416GP

2420GP

2424GP

2442GP

3020GP

3024GP

3030GP

3048GP

108GP

1210GP

1212GP

1612GP

1616GP

2016GP

2020GP

3060GP

3624GP

3630GP

3636GP

4230GP

4236GP

4824GP

4836GP

6036GP

Catalog Number

Steel Stainless

2416P

2420P

2424P

2442P

3020P

3024P

3030P

3048P

108P

1210P

1212P

1612P

1616P

2016P

2020P

3060P

3624P

3630P

3636P

4230P

4236P

4824P

4836P

6036P

108PSS4

1210PSS4

1212PSS4

1612PSS4

1616PSS4

2016PSS4

2020PSS4

2416PSS4

2420PSS4

2424PSS4

2442PSS4

3020PSS4

3024PSS4

3030PSS4

3048PSS4

3060PSS4

3624PSS4

3630PSS4

3636PSS4

4230PSS4

4236PSS4

4824PSS4

4836PSS4

6036PSS4

Panel Size H x W in.

mm

8.00 x 6.00

10.00 x 8.00

10.00 x 10.00

14.00 x 10.00

14.00 x 14.00

18.00 x 14.00

18.00 x 18.00

22.00 x 14.00

22.00 x 18.00

22.00 x 22.00

22.00 x 40.00

28.00 x 18.00

28.00 x 22.00

28.00 x 28.00

28.00 x 46.00

28.00 x 58.00

34.00 x 22.00

34.00 x 28.00

34.00 x 34.00

40.00 x 28.00

40.00 x 34.00

46.00 x 22.00

46.00 x 34.00

58.00 x 34.00

203 x 152

254 x 203

254 x 254

356 x 254

356 x 356

457 x 356

457 x 457

559 x 356

559 x 457

559 x 559

559 x 1016

711 x 457

711 x 559

711 x 711

711 x 1168

711 x 1473

864 x 559

864 x 711

864 x 864

1016 x 711

1016 x 864

1168 x 559

1168 x 864

1473 x 864

Gauge

12

12

12

12

12

12

12

12

14

12

12

12

14

14

14

12

12

12

12

12

12

12

12

12

NEMA Panel Adapters

NEMA panel adapters allow standard NEMA panels to be used in Premier series enclosures. Decreased height and width of NEMA panels increase space around panel for wire management. Kit includes four adapters and four .375-16 flanged hex nuts.

Finish: Zinc Plated

(Note: Cannot be used with enclosures 12” x 12”

(305 mm x

305 mm) or smaller.)

Mounting Foot Kits

Mounting foot kits are available in stainless steel. Four feet and hardware are included.

Catalog

Number

PCK4

Qty.

4

For use with

Premier Enclosures

30” x 30” or smaller

Catalog

Number

WMKSS6

Qty.

4

Description

Type 316 Stainless Steel

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

154

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Premier

Series Accessories

Discount Schedule: C2

Subclass: TD0

Swing-Out Panels

Swing-out panels offer a means for mounting user components and equipment near the front of an enclosure opening. Panel pivots from front of enclosure to allow easy access to internal equipment. Swing-out panels are 14 gauge with a white polyester powder finish and includes all hardware for mounting to front flange of enclosure.

(Note: Cannot be used in conjunction with depth adjustment brackets).

Note: Swing-out panel distance from panel face to inside of enclosure cover equals 1

1

/

4

”.

Catalog

Number

Panel Size

Height x Width in.

mm

1212SP

1612SP

9.78 x 9.84

248 x 250

13.78 x 9.84

350 x 250

1616SP

13.78 x 13.84

350 x 352

1620SP

13.78 x 17.84

350 x 453

2016SP

17.78 x 13.84

452 x 352

2020SP

17.78 x 17.84

452 x 453

2024SP

17.78 x 21.84

452 x 555

2416SP

21.78 x 13.84

553 x 352

2420SP

21.78 x 17.84

553 x 453

2424SP

21.78 x 21.84

553 x 555

3020SP

27.78 x 17.84

706 x 453

3024SP

27.78 x 21.84

706 x 555

3030SP

27.78 x 27.84

706 x 707

3624SP

33.78 x 21.84

858 x 555

3630SP

33.78 x 27.84

858 x 707

3636SP

33.78 x 33.84

858 x 860

For use with

Premier Enclosures

A x B

12”x12”

16”x12”

16”x16”

16”x20”

20”x16”

20”x20”

20”x24”

24”x16”

24”x20”

24”x24”

30”x20”

30”x24”

30”x30”

36”x24”

36”x30”

36”x36”

Dead Front Panels

Dead front kits offer a means for mounting user components and equipment near the front of an enclosure opening. Also, creates a barrier and controls access to the enclosure interior. Kit includes ANSI 61 gray panel and all hardware for mounting to enclosures.

(Note: Cannot be used in conjunction with depth adjustment brackets).

Catalog

Number

1212DF

1612DF

2016DF

2020DF

2420DF

2424DF

3024DF

For use with

Premier Enclosures

A x B

12”x12”

16”x12”

20”x16”

20”x20”

24”x20”

24”x24”

30”x24”

Mounting Channels

Mounting channels create a vertical or horizontal framework for DIN rail, flexible mounting straps, or other component attachment. Two channels provided for mounting on enclosure collar studs. Finish: Zinc Plated

Note: Dead front panel distance from panel face to inside of enclosure cover equals 1

1

/

4

”.

Catalog

Number

12MC

16MC

20MC

24MC

30MC

36MC

42MC

48MC

60MC

Qty.

2

2

2

2

2

2

2

2

2

For use with

Premier Enclosures

12” height or width

16” height or width

20” height or width

24” height or width

30” height or width

36” height or width

42” height or width

48” height or width

60” height or width

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

155

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Premier

Series Accessories

Discount Schedule: C2

Subclass: TD0

DIN Rail Kits

DIN rail kits provide flexibility for mounting DIN type snap-on equipment.

Three styles; TS32x15, slotted;

TS35x7.5, slotted; TS35x15, slotted all attach to collar studs either horizontally or vertically. Three DIN rails, screws and channel nuts are provided.

Finish: Yellow Zinc

Catalog

Number

12DR1P

16DR1P

20DR1P

24DR1P

12DR3P

16DR3P

20DR3P

24DR3P

12DRCP

16DRCP

20DRCP

24DRCP

Description

TS32 x 15, slotted

TS32 x 15, slotted

TS32 x 15, slotted

TS32 x 15, slotted

TS35 x 7.5, slotted

TS35 x 7.5, slotted

TS35 x 7.5, slotted

TS35 x 7.5, slotted

TS35 x 15, slotted

TS35 x 15, slotted

TS35 x 15, slotted

TS35 x 15, slotted

For use with

Premier Enclosures

12” height or width

16” height or width

20” height or width

24” height or width

12” height or width

16” height or width

20” height or width

24” height or width

12” height or width

16” height or width

20” height or width

24” height or width

Flexible Mounting Straps

Flexible mounting straps offer a versatile, horizontal or vertical mounting method inside enclosure body. Two designs; 1-hole or 3-hole pattern increase mounting flexibility and attach to enclosure collar studs. Flexible mounting strap kit contains two straps and hardware. Finish: Zinc Plated

Catalog

Number

12GS1

16GS1

20GS1

24GS1

30GS1

36GS3

42GS3

48GS3

60GS3

Description

1 hole

1 hole

1 hole

1 hole

1 hole

3 hole

3 hole

3 hole

3 hole

Fits Premier

Enclosures

12” height or width

16” height or width

20” height or width

24” height or width

30” height or width

36” height or width

42” height or width

48” height or width

60” height or width

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

156

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Premier

Series Accessories

Discount Schedule: C2

Subclass: TD0

Rack Mounting Angles

Relay rack angles are designed for mounting EIA 19” rack mount equipment inside 24” wide enclosures.

Fabricated from 14 gauge steel and zinc plated. Rack angles are mounted to enclosure flange with hardware provided. Rack mount angles are untapped and require screws and cage nuts for equipment mounting (order separately).

Finish: Zinc Plated

Type 4 Panel Enclosures

Catalog

Number

10URMA

12URMA

16URMA

19URMA

26URMA

For use with

Premier Enclosures

20” height

24” height

30” height

36” height

48” height

Mounting

Units

10

12

16

19

26

Universal Spacing [ 5 /

8

” (16mm), 5 /

8

” (16mm), 1 /

2

” (13mm)]

Swing-Out Rack Frames

Swing-out rack frames allow mounting of EIA 19” rack mount equipment.

Flexible pivoting framework provides access to back of equipment or other internal components. Designed for use with 24” wide Premier series enclosures. Mounting hardware included. Swing-out rack frame holes are untapped and require screws and cage nuts for equipment mounting

(order separately).

(Note: Cannot be used in conjunction with depth adjustment brackets).

Finish: ANSI Gray Polyester Powder

Catalog

Number

2424SF

3024SF

3624SF

For use with

Premier Enclosures

24” x 24”

30” x 24”

36” x 24”

Mounting

Units

11

15

18

Universal Spacing [(

5

/

8

” (16mm),

5

/

8

” (16mm),

1

/

2

” (13mm)]

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

157

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Premier

Series Accessories

Discount Schedule: C2

Subclass: TD0

Handles

Padlocking, key-locking or non-locking handles are interchangeable with standard slotted quarter-turn flush latch on Premier series enclosures.

Available keyed alike or keyed different, please specify when ordering.

Catalog

Number

WMHNL

WMHK-01

WMHK-02

WMHK-03

WMHK-04

WMHPTO

Description

Wall-mount handle, non-locking

Wall-mount handle, key-locking - keyed 01

Wall-mount handle, key-locking - keyed 02

Wall-mount handle, key-locking - keyed 03

Wall-mount handle, key-locking - keyed 04

Wall-mount handle, padlockable

Security Latch Inserts

Security latch inserts interchange with slotted quarter-turn flush latch and provide security and control access to interior of enclosure. Inserts include matching key.

7MTLK

Catalog

Number

7MTLK

7MSLK

3MDBLK

Description

7mm triangular latch insert

7mm square latch insert

3mm double bit latch insert

7MSLK 3MDBLK

Print Pockets

Print pockets provide a convenient place to store operation manuals, diagrams, or other documents inside the enclosure. Thermoplastic pockets are gray and have cut away areas for viewing contents. Pockets have adhesive backing for mounting inside on enclosure door.

Catalog

Number

32170

32171

Length x Width

6” x 6”

10” x 10”

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

158

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Premier

Series Accessories

Discount Schedule: C2

Subclass: TD0

Depth Adjustment Brackets

Depth adjustment brackets allow variable depth mounting of premier accessories. Designed for use with 6”,

8” or 12” deep enclosures. Kit is available in quantities of 4 or 2 and includes mounting channel, adjustable mechanism and hardware. When enclosure has 6 collar studs, use two kits. (Note: Not for use with swing-out rack frame, dead front panel or swingout panel). Finish: Zinc Plated

Catalog

Number

64AMK

84AMK

82AMK

124AMK

122AMK

Qty.

2

4

2

4

4

For use with

Premier Enclosures

6” depth or greater

8” depth or greater

8” depth or greater

12” depth or greater

12” depth or greater

Pole Mounting Kits

Pole mounting kits allow installation of enclosure on round or rectangular poles. Kit includes hot dip galvanized after fabrication strut channel, stainless steel band and hardware for top and bottom mounting of enclosure.

Note: Pole diameter range 4” minimum to

12” maximum.

Catalog

Number

12PMK

16PMK

20PMK

24PMK

30PMK

For use with

Premier Enclosures

12” width

16” width

20” width

24” width

30” width

Hardware

Phillips head screws and cage nuts are available in #10-32, #12-24 or M6 and allow mounting of equipment to untapped holes in rack mounting angles and swing-out rack frame.

Catalog Number

E2-MA-1032-PHMS-100

E2-MA-1224-PHMS-100

E2-MA-M6-PHMS-100

Catalog Number

E2-MA-CN-1032-100

E2-MA-CN-1224-100

E2-MA-CN-M6-100

Sold in bags of 100 pieces.

Screw Type

#10-32 Phillips

#12-24 Phillips

M6 Phillips

Cage Nut Type

#10-32 Tapped

#12-24 Tapped

M6 Tapped

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

159

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Single-Door with 3-Point Locking

Data Sheet and Catalog Number

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

Panels

Swing-out panel kit

NEMA terminal kit

Window Kits

Floor stand kit

• Replacement handle, T4PKHB, (see page 422)

Construction

Enclosure and door are fabricated from code gauge steel,

(see pages 160 & 161)

All continuous welded seams are finished smooth

Continuous hinge with stainless steel hinge pin

Internal 3-point latching with a keylocking and padlock handle

Door has a seamless poured in-place gasket

Formed lip around enclosure opening diverts liquids and contaminants

Ground stud provided on door

Print pocket provided

.375-16 colar studs are provided for mounting optional panel

External mounting feet

Application

Houses electrical controls and instruments

Intended for indoor or outdoor use

Protects against windblown dust and rain, splashing water and hose directed water

Standards

UL 508 listed, Type 4, Type 12

CSA C22.2 No.94 certified, Type 4, Type 12

Conforms to NEMA standard for Type 3, Type 4,

Type 12

Discount Schedule: C2

Subclass: DF0

Enclosure

Catalog Number

24206-43PT

24208-43PT

24248-43PT

30248-43PT

30308-43PT

36248-43PT

36308-43PT

48368-43PT

242010-43PT

363010-43PT

483610-43PT

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

24 x 20 x 6

24 x 20 x 8

24 x 24 x 8

30 x 24 x 8

30 x 30 x 8

36 x 24 x 8

36 x 30 x 8

48 x 36 x 8

24 x 20 x 10

36 x 30 x 10

48 x 36 x 10

609 x 508 x 152

609 x 508 x 203

609 x 609 x 203

762 x 609 x 203

762 x 762 x 203

914 x 609 x 203

914 x 762 x 203

1219 x 914 x 203

609 x 508 x 254

914 x 762 x 254

1219 x 914 x 254

Gauge

14

14

14

14

16

16

14

14

16

14

14

Panel

Catalog

Number

AW2420P

AW2420P

AW2424P

AW3024P

AW3030P

AW3624P

AW3630P

AW4836P

AW2420P

AW3630P

AW4836P

Conductive

Catalog

Number

AW2420GP

AW2420GP

AW2424GP

AW3024GP

AW3030GP

AW3624GP

AW3630GP

AW4836GP

AW2420GP

AW3630GP

AW4836GP

Panel Size

Panel

Height x Width in.

mm

20.87 x 16.87

20.87 x 16.87

20.87 x 20.87

26.87 x 20.87

26.87 x 26.87

32.87 x 20.87

32.87 x 26.87

44.87 x 32.87

20.87 x 16.87

32.87 x 26.87

44.87 x 32.87

530 x 429

530 x 429

530 x 530

682 x 530

682 x 682

835 x 530

835 x 682

1139 x 835

530 x 429

835 x 682

1139 x 835

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

160

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Single-Door with 3-Point Locking

Illustration Sheet and Catalog Number

Enclosure

Catalog Number

242412-43PT

302412-43PT

363012-43PT

363612-43PT

483612-43PT

603612-43PT

483616-43PT

603616-43PT

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

24 x 24 x 12

30 x 24 x 1`2

36 x 30 x 12

36 x 36 x 12

48 x 36 x 12

60 x 36 x 12

48 x 36 x 16

60 x 36 x 16

609 x 609 x 305

762 x 609 x 305

914 x 762 x 305

914 x 914 x 305

1219 x 914 x 305

1524 x 914 x 305

1219 x 914 x 406

1524 x 914 x 406

B

B (**B)

Gauge

14

14

14

14

14

14

14

14

Panel

Catalog

Number

AW2424P

AW3024P

AW3630P

AW3636P

AW4836P

AW6036P

AW4836P

AW6036P

∅ .44

(11) mounting hole (2PL)

Conductive

Catalog

Number

AW2424GP

AW3024GP

AW3630GP

AW3636GP

AW4836GP

AW6036GP

AW4836GP

AW6036GP

Panel Size

Panel

Height x Width in.

mm

20.87 x 20.87

26.87 x 20.87

32.87 x 26.87

32.87 x 32.87

44.87 x 32.87

56.87 x 32.87

44.87 x 32.87

56.87 x 32.87

530 x 530

682 x 530

835 x 682

835 x 835

1139 x 835

1444 x 835

1139 x 835

1444 x 835

C

X

A+1.25

(32)

A print pocket (supplied)

B-2.75

(70)

CL

A-2.75

(70)

3-point locking handle

CL

Front View

B-4.75

(121)

3-point locking handle

C

X

mounting feet optional panel

Side View

A-4.75

(121)

CL

.375-16 collar stud

(omit center studs where

"A" is less than 36)

.375-16 collar stud

(omit center studs where

"B" is less than 36)

Note:

Dimensions: **B = (-2.50) if 12 inches wide;

(-6.00) if wider than 12 inches.

CL

Section X-X

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

161

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Double-Door with 3-Point Locking

Data Sheet and Catalog Number

Application

Houses electrical controls and instruments

Intended for indoor or outdoor use

Protects against windblown dust and rain, splashing water and hose directed water

Standards

UL 508 listed, Type 4, 12

CSA C22.2 No.94 certified, Type 4, 12

Conforms to NEMA standard for Type 3, 4, 12

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

Panels

Window Kits

Floor stand kit

Lights

• Replacement handle, T4PKHB, (see page 422)

Construction

Enclosure and door are fabricated from (14) gauge steel

All continuous welded seams are finished smooth

Heavy-duty continuous hinges with stainless steel hinge pins

Internal 3-point latching with keylocking and padlock handles

Removable centerpost for easy panel installation

Doors have a seamless poured in-place gasket

Formed lip around enclosure opening diverts liquids and contaminants

Ground stud provided on door

Print pocket provided

.375-16 colar studs are provided for mounting optional panel

External mounting feet

Discount Schedule: C2

Subclass: DL0

Enclosure

Catalog Number

244210-4D3PT

304210-4D3PT

304810-4D3PT

306010-4D3PT

364812-4D3PT

366012-4D3PT

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

24.00 x 42.00 x 10.00

609 x 1067 x 254

30.00 x 42.00 x 10.00

762 x 1067 x 254

30.00 x 48.00 x 10.00

762 x 1219 x 254

30.00 x 60.00 x 10.00

762 x 1524 x 254

36.00 x 48.00 x 12.00

914 x 1219 x 305

36.00 x 60.00 x 12.00

762 x 1524 x 305

Panel

Catalog Number

AW4224P

AW4230P

AW4830P

AW6030P

AW4836P

AW6036P

Conductive

Panel

Catalog Number

--

AW4230GP

AW4830GP

--

AW4836GP

AW6036GP

Panel Size in.

Height x Width mm

38.87 x 20.87

38.87 x 26.87

44.87 x 26.87

56.87 x 26.87

44.87 x 32.87

56.87 x 32.87

987 x 530

987 x 682

1139 x 682

1444 x 682

1139 x 835

1444 x 835

ÇNotes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

162

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Wall-Mount Enclosures

Type 4 Double-Door with 3-Point Locking

Illustration Sheet

B

B-6.00

(152)

∅ .44

(11) mounting hole (2PL)

C

X

B-2.75

(70)

A+1.25

(32)

A

A-2.75

(70)

Front View

CL

B-4.75

(121) rotation

3-point locking handle print pocket

(supplied) mounting feet

X

Side View

optional back panel body stiffener

(omit where “A” is less than 30)

.375-16 collar stud

(omit center studs where

"A" is less than 36)

A-4.75

(121)

CL

Section X-X

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

163

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Double-Door Floor-Standing

Data Sheet and Catalog Number

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Panels

• Leg stabilizer kit

• Touch-up paint

• See Accessories section

Construction

• Enclosure and door are fabricated from (10) gauge steel

• All continuous welded seams are finished smooth

• Each door is secured to the body with a heavy-duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides

• Print pocket provided

• Each door has a padlock hasp with sealing hole provision

• Doors have a seamless poured in-place gasket

• Ground stud provided on doors

• Removable center post for complete front access

• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel

• Large lifting eyebolts are supplied

• Mounting legs are provided for floor mounting

Application

• Houses electrical controls and instruments

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards

• UL 508 listed, Type 4 and Type 12

• CSA C22.2 No.94 certified, Type 4 and Type 12

• Conforms to NEMA standard for Type 4 and Type 12

Discount Schedule: C2

Subclass: DL0

Enclosure

Catalog Number

624810-4FD

626012-4FD

746012-4FD

747212-4FD

747224-4FD

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

62.00 x 48.00 x 10.00

1575 x 1219 x 254

62.00 x 60.00 x 12.00

1575 x 1524 x 305

74.00 x 60.00 x 12.00

1880 x 1524 x 305

74.00 x 72.00 x 12.00

1880 x 1829 x 305

74.00 x 72.00 x 24.00

1880 x 1829 x 610

Panel Panel Size

Catalog Number

AW6048P

AW6060P

AW7260P

AW7272P

AW7272P

Height x Width in.

mm

55.87 x 43.87

1419 x 1114

55.87 x 55.87

1419 x 1419

67.87 x 55.87

1724 x 1419

67.87 x 67.87

1724 x 1724

67.87 x 67.87

1724 x 1724

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

164

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Ground-Mount Enclosures

Type 4 Double-Door Floor-Standing

Illustration Sheet

Type 4 Panel Enclosures

C

B lifting eye door clamp

(see note on this page)

X X

A A-4.75

(121) padlock hasp print pocket

(supplied) panel support

12.00

(305) mounting leg

Front View

Side View

C-1.38

(35)

2.87

(73)

C+.25

(6)

B-2.75

(70)

Section X-X

(enlarged) removable center post collar stud optional back panel

Notes: Clamps are mounted along three sides of the enclosure door. Spacing between clamps along side opposite the hinge does not exceed 15 inches. Four lifting eyes are furnished when C dimension is 24” (610 mm).

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

165

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Double-Door Floor-Standing with Quarter-Turn Latches

Data Sheet and Catalog Number

Application

Houses electrical controls and instruments

Intended for indoor or outdoor use

Protects against windblown dust and rain, splashing water and hose directed water

Standards

UL 508 listed, Type 4 and Type 12

CSA C22.2 No.94 certified, Type 4 and Type 12

Conforms to NEMA standard for Type 3, Type 4,

Type 12

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

Panels

Panel Support Kit

Panel Lifting Kit

Leg stabilizer kit

Lights

Window kits

Construction

Enclosure and doors are fabricated from (12) gauge steel

All continuous welded seams are finished smooth

Continuous hinge with stainless steel hinge pin

Slotted quarter-turn flush latch(es)

Doors have a seamless poured in-place gasket

Removable centerpost for easy panel installation

Formed lip around enclosure opening diverts liquids and contaminants

Ground stud provided on door

Print pocket provided

Heavy gauge angle supports and .375-16 colar studs are provided for mounting optional panel

Large lifting eyebolts

Mounting legs

Discount Schedule: C2

Subclass: DL0

Enclosure

Catalog Number

604812-4FDQT

606012-4FDQT

726012-4FDQT

727212-4FDQT

727224-4FDQT

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

60 x 48 x 12

60 x 60 x 12

72 x 60 x 12

72 x 72 x 12

72 x 72 x 24

1524 x 1219 x 305

1524 x 1524 x 305

1829 x 1524 x 305

1829 x 1829 x 305

1829 x 1829 x 609

Panel Panel Size

Catalog Number

AW6048P

AW6060P

AW7260P

AW7272P

AW7272P

Height x Width in.

mm

55.87 x 43.87

1419 x 1114

55.87 x 55.87

1419 x 1419

67.87 x 55.87

1724 x 1419

67.87 x 67.87

1724 x 1724

67.87 x 67.87

1724 x 1724

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

166

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Double-Door Floor-Standing with Quarter-Turn Latches

Illustration Sheet

C

B lifting eye

X

X

A

A-4.75

(121) quarter-turn latches print pocket

(supplied) panel support

12.00

(305) mounting leg

Front View

Side View

C-1.38

(35)

C+.25

(6)

B-2.75

(70) removable center post collar stud

2.87

(73)

Section X-X

(enlarged) optional back panel

Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm).

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

167

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Double-Door Floor-Standing with 3-Point Locking Locking

Data Sheet and Catalog Number

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

Panels

Panel Support Kit

Panel Lifting Kit

Leg stabilizer kit

Lights

Window kits

• Replacement handle, T4PKHB, (see page 422)

Construction

Enclosure and doors are fabricated from (12) gauge steel

All continuous welded seams are finished smooth

Continuous hinge with stainless steel hinge pin

Internal 3-point latching with keylocking and padlock handles

Doors have a seamless poured in-place gasket

Removable centerpost for easy panel installation

Formed lip around enclosure opening diverts liquids and contaminants

Ground stud provided on door

Print pocket provided

Heavy gauge angle supports and .375-16 colar studs are provided

for mounting optional panel

Large lifting eyebolts

Mounting legs

Application

Houses electrical controls and instruments

Intended for indoor or outdoor use

Protects against windblown dust and rain, splashing

water and hose directed water

Standards

UL 508 listed, Type 4 and Type 12

CSA C22.2 No.94 certified, Type 4 and Type 12

Conforms to NEMA standard for Type 3, Type 4,

Type 12

Discount Schedule: C2

Subclass: DL0

Enclosure Enclosure Size Panel Panel Size

Height x Width x Depth

A x B x C Height x Width

Catalog Number in. mm

Catalog Number in. mm

624810-4FD3PT 62 x 48 x 10 1575 x 1219 x 254 AW6048P 55.87 x 43.87 1419 x 1114

626012-4FD3PT 62 x 60 x 12 1575 x 1524 x 305 AW6060P 55.87 x 55.87 1419 x 1419

746012-4FD3PT 74 x 60 x 12 1879 x 1524 x 305 AW7260P 67.87 x 55.87 1724 x 1419

747212-4FD3PT 74 x 72 x 12 1879 x 1829 x 305 AW7272P 67.87 x 67.87 1724 x 1724

747224-4FD3PT 74 x 72 x 24 1879 x 1829 x 609 AW7272P 67.87 x 67.87 1724 x 1724

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

168

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Double-Door Floor-Standing with 3-Point Locking

Illustration Sheet

C

B lifting eye

X

A

A-4.75

(121)

3-point locking handle rotation print pocket

(supplied)

X

3-point locking handle panel support

12.00

(305) mounting leg

Front View

Side View

C-1.38

(35)

C+.25

(6)

B-2.75

(70) removable center post

2.87

(73) collar stud optional back panel

Section X-X

(enlarged)

Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm).

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

169

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Free-Standing

Data Sheet

Application

• Houses electrical controls and instruments

• Easy access panels or rack mounts for housing optional equipment

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards

• UL 508 listed, Type 4 and Type 12

• CSA C22.2 No.94 certified, Type 4 and Type 12

• Conforms to NEMA standard for Type 4 and Type 12

• E.I.A. RS-310-D

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Full and half panels

• Side and swing panels

• Channel mounting hardware

• Equipment rack mounts

• Touch-up paint

• See Accessories section

Construction

• Enclosure and door are fabricated from (12) gauge steel

• All continuous welded seams are finished smooth

• Doors are secured to the body with a heavy-duty continuous hinge on one side and easy-to-release stainless steel door clamps mounted to the other three sides

• Door has a seamless poured in-place gasket

• Ground stud provided on door

• Each door has a padlock hasp with sealing hole provision

• Print pocket provided

• Large lifting eyebolts are supplied

• Mounting channels are welded inside for locating panels or rack mount equipment along enclosure depth

• A variety of optional panels and accessories are available (see accessories pages 178-189)

Discount Schedule: C2

Subclass: DL0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

170

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Free-Standing

Illustration Sheet and Catalog Number

Enclosure

Catalog Number

722518-4FS

723118-4FS

723718-4FS

722524-4FS

723124-4FS

723724-4FS

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

72.00 x 25.00 x 18.00

72.00 x 31.00 x 18.00

72.00 x 37.00 x 18.00

72.00 x 25.00 x 24.00

72.00 x 31.00 x 24.00

72.00 x 37.00 x 24.00

1829 x 635 x 457

1829 x 787 x 457

1829 x 940 x 457

1829 x 635 x 610

1829 x 787 x 610

1829 x 940 x 610

in.

D mm

29.12

740

29.12

740

29.12

740

29.12

740

29.12

740

29.12

740

A

B lifting eye

B-2.62

(67)

B-3.75

(95) padlock hasp

CL

A-10.75

(273)

3.50

(89) door clamp

(see note on this page) print pocket

(supplied)

CL

Front View

7.37

(187) mounting channel

C

Side View

D

D

8.87

(225)

Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm). Clamps are mounted along three sides of the enclosure door.

Spacing between clamps along side opposite the hinge does not exceed 15 inches.

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

171

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Free-Standing with Quarter-Turn Latches

Data Sheet and Catalog Number

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Full and half panels

• Side and swing panels

• Panel Support Kit

• Panel Lifting Kit

• Channel mounting hardware

• Equipment Rack Mounts

• Lights

• Window kits

Construction

• Enclosure and doors are fabricated from (12) gauge steel

• All continuous welded seams are finished smooth

• Heavy-Duty Continuous hinge with stainless steel hinge pin

• Slotted quarter-turn flush latch(es)

• Door has a seamless poured in-place gasket

• Formed lip around enclosure opening diverts liquids and contaminants

• Ground stud provided on door

• Print pocket provided

• Mounting channels are welded inside for locating panels or rack-mount equipment along enclosure depth

• Provision for mounting flourescent light

• Large lifting eyebolts

Application

• Houses electrical controls and instruments

• Easy access panels or rack mounts for housing optional equipment

• Intended for indoor or outdoor use

• Protects against windblown dust and rain, splashing water and hose directed water

Standards

• UL 508 listed, Type 4 and Type 12

• CSA C22.2 No.94 certified, Type 4 and Type 12

• Conforms to NEMA standard for Type 3, Type 4,

Type 12

• E.I.A. RS-310-D

Discount Schedule: C2

Subclass: DL0

Enclosure

Catalog Number

722418-4FSQT

723024-4FSQT

723624-4FSQT

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

72 x 24 x 18

72 x 30 x 24

72 x 36 x 24

1829 x 609 x 457

1829 x 762 x 609

1829 x 914 x 609

in.

29.12

29.12

29.12

D mm

739

739

739

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

172

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Free-Standing with Quarter-Turn Latches

Illustration Sheet

B-2.62

(67)

B-3.75

(95)

B lifting eye

C

D quarter-turn latches

CL

A

A-10.75

(273) print pocket

(supplied)

CL

Front View

7.37

(187)

3.50

(89) mounting channel

Side View

D

8.87

(225)

Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm).

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

173

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Free-Standing with 3-Point Locking

Data Sheet

Application

Houses electrical controls and instruments

• Easy access panels or rack mounts for housing optional equipment

Intended for indoor or outdoor use

Protects against windblown dust and rain, splashing water and hose directed water

Standards

UL 508 listed, Type 4 and Type 12

CSA C22.2 No.94 certified, Type 4 and Type 12

Conforms to NEMA standard for Type 3, 4, 12

• E.I.A. RS-310-D

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Full and half panels

• Side and swing panels

• Panel Support Kit

• Panel Lifting Kit

• Channel mounting hardware

• Equipment Rack Mounts

• Lights

• Window kits

• Replacement handle, T4PKHB, (see page 422)

Construction

• Enclosure and doors are fabricated from (12) gauge steel

• All continuous welded seams are finished smooth

• Heavy-Duty continuous hinge with stainless steel hinge pin

• Internal 3-point latching with key-locking and padlock handles

• Door has a seamless poured in-place gasket

• Formed lip around enclosure opening diverts liquids and contaminants

• Ground stud provided on door

• Print pocket provided

• Mounting channels are welded inside for locating panels or rack-mount equipment along enclosure depth

• Provision for mounting flourescent light

• Large lifting eyebolts

Discount Schedule: C2

Subclass: DL0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

174

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 Free-Standing with 3-Point Locking

Illustration Sheet and Catalog Number

Enclosure

Catalog Number

602418-4FS3PT

722418-4FS3PT

723018-4FS3PT

723618-4FS3PT

603624-4FS3PT

722424-4FS3PT

723024-4FS3PT

723624-4FS3PT

723630-4FS3PT

723636-4FS3PT

B

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

60 x 24 x 18

72 x 24 x 18

72 x 30 x 18

72 x 36 x 18

60 x 36 x 24

72 x 24 x 24

72 x 30 x 24

72 x 36 x 24

72 x 36 x 30

72 x 36 x 36

1524 x 609 x 457

1829 x 609 x 457

1829 x 762 x 457

1829 x 914 x 457

1524 x 914 x 609

1829 x 609 x 609

1829 x 762 x 609

1829 x 914 x 609

1829 x 914 x 762

1829 x 914 x 609

in.

23.12

29.12

29.12

29.12

23.12

29.12

29.12

29.12

29.12

29.12

D mm

587

739

739

739

587

739

739

739

739

739 lifting eye

C

B-2.62

(67)

B-3.75

(95)

D

3-point handle lock

CL

A rotation

A-10.75

(273)

D

3.50

(89)

8.87

(225) print pocket

(supplied)

CL

Front View

7.37

(187) mounting channel

Side View

Notes: Four lifting eyes are furnished when C dimension is 24” (610 mm).

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

175

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 EnviroShield

Free-Standing with 3-Point Locking

Data Sheet

Application

• Houses electrical controls and electrical instruments in harsh environments

• Provides quick and easy access indoors and out

• Protects against circulating dust, falling dirt, dripping non-corrosive liquids, rain, sleet, ice, splashing and hose directed water

Standards

• UL 508 listed, Type 3R, Type 4, Type 4X, Type 12

• Conforms to NEMA standard for Type 3R,

Type 4, Type 4X, Type 12

• NSF Criteria C-2

• E.I.A. RS-310-D

Finish

• Type 4 enclosures have a washed and phosphate undercoat with ANSI 61 gray polyester powder inside and out

Accessories

• Full and half panels

• Side and swing panels

• Center post

• Channel mounting hardware

• Touch-up paint

• Climate control

• Mounting legs

• Rack mounting angles

• Swing out mounting frames

• See Accessories section

• Replacement handle, 11184A (see page 422).

Construction

• Enclosure and door are fabricated from (12) gauge steel

• All continuous welded seams are finished smooth

• Doors are secured to the body with a heavy-duty concealed lift-off hinge and a 3-point padlock handle mechanism on each door

• Removable center post

• Doors have a fixed, oil-resistant gasket

• Ground stud provided on doors and bodies

• Print pocket provided

• Large lifting eyes are integrated with sides of enclosure

• Mounting channels are welded inside for locating panels or rack mounts along enclosure depth, as well as mounting studs for fixed panels

• Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used

• A variety of optional panels and accessories are available,

(see pages 178-189)

Discount Schedule: C2

Subclass: VR0

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

176

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Ground-Mount Enclosures

Type 4 EnviroShield

Free-Standing with 3-Point Locking

Illustration Sheet and Catalog Number

Enclosure

Catalog Number

ANSI 61 Gray

Carbon Steel

ES-604812-4

ES-604816-4

ES-604820-4

ES-604824-4

ES-606012-4

ES-606016-4

ES-606020-4

ES-606024-4

ES-726012-4

ES-726016-4

ES-726020-4

ES-726024-4

ES-727212-4

ES-727216-4

ES-727220-4

ES-727224-4

Enclosure Size

Height x Width x Depth

A x B x C in.

mm

60.00 x 48.00 x 12.00

60.00 x 48.00 x 16.00

60.00 x 48.00 x 20.00

60.00 x 48.00 x 24.00

60.00 x 60.00 x 12.00

60.00 x 60.00 x 16.00

60.00 x 60.00 x 20.00

60.00 x 60.00 x 24.00

72.00 x 60.00 x 12.00

72.00 x 60.00 x 16.00

72.00 x 60.00 x 20.00

72.00 x 60.00 x 24.00

72.00 x 72.00 x 12.00

72.00 x 72.00 x 16.00

72.00 x 72.00 x 20.00

72.00 x 72.00 x 24.00

1524 x 1219 x 305

1524 x 1219 x 406

1524 x 1219 x 508

1524 x 1219 x 609

1524 x 1524 x 305

1524 x 1524 x 406

1524 x 1524 x 508

1524 x 1524 x 609

1829 x 1524 x 305

1829 x 1524 x 406

1829 x 1524 x 508

1829 x 1524 x 609

1829 x 1829 x 305

1829 x 1829 x 406

1829 x 1829 x 508

1829 x 1829 x 609

D mm

1980

1980

1980

1980

1980

1980

1980

2018

1676

1676

1676

1676

1676

1676

1676

1713

in.

77.98

77.98

77.98

77.98

77.98

77.98

77.98

79.46

65.98

65.98

65.98

65.98

65.98

65.98

65.98

67.46

in.

76.23

76.23

76.23

76.23

76.23

76.23

76.23

76.23

64.23

64.23

64.23

64.23

64.23

64.23

64.23

64.23

E mm

1936

1936

1936

1936

1936

1936

1936

1936

1631

1631

1631

1631

1631

1631

1631

1631 integrated lifting eyes

B sloped trough collar

C+2.09

(53)

C removable center post lighting bracket concealed lift-off hinges padlock

3-point locking mechanism adjustable back

& side panel mounting provisions

D

E

Min=A-2.60

(66)

Max=A-3.20

(81)

5.43

(138)

A body stiffeners

B/2-1.97

(50)

B-3.94

(100)

4.09

(104)

2.00

(51)

Front View

adjustable top & bottom mounting provisions

2.65

(67) grounding & bonding provisions on door & body

Side View

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

177

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Type 4 Single-Door

Full and Half Panel

Illustration Sheet and Catalog Number

Discount Schedule: C2

Subclass: DS0

Panel

Catalog

Number

AF6024P

AF6036P

AF7224P

AF7230P

AF7236P

Full Panel (Single-Door)

Panel Size Fits

Height x Width

A x B in.

mm in.

C mm

Enclosure

Height x Width in.

mm

47.87 x 19.87

1216 x 505 23.12

587 60.00 x 24.00

1524 x 610

47.87 x 31.87

1216 x 809 23.12

587 60.00 x 36.00

1524 x 914

59.87 x 19.87

1521 x 505 29.12

740 72.00 x 24.00

1829 x 610

59.87 x 25.87

1521 x 657 29.12

740 72.00 x 30.00

1829 x 762

59.87 x 31.87

1521 x 809 29.12

740 72.00 x 36.00

1829 x 914

Panel

Catalog

Number

AF6024HP

AF6036HP

AF7224HP

AF7230HP

AF7236HP

Half Panel (Single-Door)

Panel Size

Height x Width

A x B in.

mm

24.75 x 19.87

629 x 505

24.75 x 31.87

629 x 809

30.75 x 19.87

781 x 505

30.75 x 25.87

781 x 657

30.75 x 31.87

781 x 809

in.

C mm in.

Fits

Enclosure

Height x Width mm

23.12

587 60.00 x 24.00

1524 x 610

23.12

587 60.00 x 36.00

1524 x 914

29.12

587 72.00 x 24.00

1829 x 610

29.12

587 72.00 x 30.00

1829 x 762

29.12

587 72.00 x 36.00

1829 x 914

B

B-1.62

(41)

B

B-1.62

(41)

C

A

A

A-1.62

(41)

C panel side bracket included

(see illustration

1 page 184 and detail sheet page

185)

Half Panel

(upper mount)

C

Full Panel

C

A

Half Panel

(lower mount)

Full Panel Mounting

Half Panel Mounting

Note: Full and Half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel side brackets and all hardware necessary for channel and panel mounting. Half Panels can be mounted in either the upper or lower portion of the enclosure. Free standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, Full and Half panels can be mounted back-to-back.

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

178

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Type 4 Double-Door

Full Panel

Illustration Sheet and Catalog Number

Panel

Catalog

Number

AF6048P

AF6060P

AF7248P

AF7260P

AF7272P

Discount Schedule: C2

Subclass: DS0

Panel Size Fits Enclosure

Height x Width

A x B in.

mm in.

C mm in.

D mm

Height x Width in.

mm

47.87 x 43.87

1216 x 1114 23.12

587 21.12

530 60.00 x 48.00

1524 x 1219

47.87 x 55.87

1216 x 1419 23.12

587 27.12

689 60.00 x 60.00

1524 x 1524

59.87 x 43.87

1521 x 1114 29.12

740 21.12

530 72.00 x 48.00

1829 x 1219

59.87 x 55.87

1521 x 1419 29.12

740 27.12

689 72.00 x 60.00

1829 x 1524

59.87 x 67.87

1521 x 1724 29.12

740 33.12

841 72.00 x 72.00

1829 x 1829

D

B

B-1.62

(41)

D panel side bracket included

(see illustration 1 page 184 and detail sheet page 185)

C

A

A-1.62

(41)

C

Full Panel

center post included with double-door full panel

(see illustration 5 page 184)

Full Panel Mounting

Notes: Full Panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with Panel

Brackets, Center Post assembly, panel handle kit and all hardware necessary for channel and panel mounting. The Center Post assembly offers additional support of panel and equipment. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, Full and

Half Panels can be mounted back-to-back.

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

179

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Type 4 Double-Door

Half Panel

Illustration Sheet and Catalog Number

Panel

Catalog

Number

AF6048HP

AF7248HP

AF7260HP

AF7272HP

Discount Schedule: C2

Subclass: DS0

Panel Size

Height x Width

A x B in.

mm

24.75x43.87

30.75x43.87

30.75x55.87

30.75x67.87

629x1114

781x1114

781x1419

781x1724

Fits Enclosure

Height x Width

C

D in.

mm in.

mm in.

23.12

587 21.12

536 60.00x48.00

mm

1524x1219

29.12

740 21.12

536 72.00x48.00

29.12

740 7.12

181 72.00x60.00

29.12

740 33.12

841 72.00x72.00

1829x1219

1829x1524

1829x1829

B

B-1.62

(41)

D D panel side bracket included

(see illustration 1 page 184 and detail sheet page 185)

A C

Half Panel

(upper mount)

A C

Half Panel

(lower mount) center post or double-door panel support bracket

(sold separately)

(see illustration 5 page 184)

Half Panel Mounting

Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with Panel Brackets and all hardware necessary for channel and panel mounting. A Center Post assembly or a double-door panel support bracket (catalog

number AFSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, Full and Half Panels can be mounted back-to-back.

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

180

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Free-Standing Enclosure Accessories

Type 4

Side Panel And Center Post

Illustration Sheet and Catalog Number

Panel

Catalog Number

AF6018SP

AF7218SP

AF7224SP

Side Panel

Panel Size

Height x Width

A x B in.

mm

Fits Enclosure

Height Depth*

C in.

mm in.

mm in.

mm

48.37 x 13.87

1229 x 340 23.12 587 60.00 1524 18.00 457

60.37 x 13.87

1533 x 340 29.12 740 72.00 1829 18.00 457

60.37 x 19.87

1533 x 505 29.12 740 72.00 1829 24.00 610

Type 4 Panel Enclosures

Discount Schedule: C2

Subclass: DS0

Center Post

Center Post

Catalog Number

AF60CPS

AF72CPS in.

A mm in.

B mm

58.37

1483 23.12

587

70.37

1787 29.12

740

Fits

Enclosure in.

Height mm

60.00

72.00

1524

1829

* Back panels restrict the movement of side panels and will prohibit mounting in some depths. See detail sheet for back panel spacing.

B

B-1.62

(41)

C

B

A

A

A-2.12

(54)

C

B

Side Panel

Side Panel Mounting

Side Panels are (12) gauge steel and furnished with hardware necessary for channel mounting. They will fit any width enclosure and are adjustable along its depth, however, when Full or Half Panels are installed, movement will be restricted and with some depths make side mounting prohibitive.

Center Post Assembly

Center Post assembly is furnished with all double-door Full

Panels and includes hardware necessary for channel and panel mounting. The Center Post is optional on double-door

Half Panels and Swing Panel mounting and must be ordered separately. It attaches to the top and bottom channels making it adjustable along the depth of the enclosure. See illustration

#5 on the Detail Sheet-page 184.

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

181

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Type 4 Single-Door

Full and Half Swing Panel

Illustration Sheet and Catalog Number

Full Swing Panel (Single-Door)

Panel Panel Size Fits

Catalog

Number

Height x Width

A x B in.

mm in.

C mm

Enclosure

Height x Width in.

mm

AF6024SWP

47.87 x 18.75

1216 x 476 23.12

587 60.00 x 24.00

1524 x 610

AF6036SWP

47.87 x 30.75

1216 x 781 23.12

587 60.00 x 36.00

1524 x 914

AF7224SWP

59.87 x 18.75

1521 x 476 29.12

740 72.00 x 24.00

1829 x 610

AF7230SWP

59.87 x 24.75

1521 x 629 29.12

740 72.00 x 30.00

1829 x 762

AF7236SWP

59.87 x 30.75

1521 x 781 29.12

740 72.00 x 36.00

1829 x 914

Discount Schedule: C2

Subclass: DS0

Half Swing Panel (Single-Door)

Panel Panel Size Fits

Catalog

Number

Height x Width

A x B in.

mm in.

C mm

Enclosure

Height x Width in.

mm

AF6024HSWP

47.87 x 18.75

1216 x 476 23.12

587 60.00 x 24.00

1524 x 610

AF6036HSWP

47.87 x 30.75

1216 x 781 23.12

587 60.00 x 36.00

1524 x 914

AF7224HSWP

59.87 x 18.75

1521 x 476 29.12

740 72.00 x 24.00

1829 x 610

AF7230HSWP

59.87 x 24.75

1521 x 629 29.12

740 72.00 x 30.00

1829 x 762

AF7236HSWP

59.87 x 30.75

1521 x 781 29.12

740 72.00 x 36.00

1829 x 914

3.18

(81)

B

2.06

(52)

3.18

(81)

B 2.06

(52) swing panel bracket assembly included (See detail sheet page 186) hinge

Half Swing Panel

(upper mount)

C A

C

A

C hinge

Full Swing Panel

panel side bracket included

(see illustration 1 page 184 and detail sheet page

186) hinge

Half Swing Panel

(lower mount)

C

A

Full Swing Panel Mounting Half Swing Panel Mounting

Note: Full Swing Panel and Half Swing Panel for single-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket and furnished with Panel Brackets and all hardware necessary for channel and panel mounting. Panels can be installed so they hinge on either the left or right side. In addition, Half Panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, Full and Half Swing Panels can be mounted back-to-back.

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

182

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Free-Standing Enclosure Accessories

Type 4 Double-Door

Full and Half Swing Panel

Illustration Sheet and Catalog Number

Full Swing Panel (Single-Door)

Panel

Catalog

Number

Panel Size

Height x Width in.

A x B mm in.

C mm

Fits

Enclosure

Height x Width in.

mm

AF6024SWP

47.87 x 18.75

1216 x 476 23.12

587 60.00 x 48.00 1524 x 1219

AF7224SWP

59.87 x 18.75

1521 x 476 29.12

740 72.00 x 48.00 1829 x 1219

AF7230SWP

59.87 x 24.75

1521 x 629 29.12

740 72.00 x 60.00 1829 x 1524

AF7236SWP

59.87 x 30.75

1521 x 781 29.12

740 72.00 x 72.00 1829 x 1829

Type 4 Panel Enclosures

Discount Schedule: C2

Subclass: DS0

Half Swing Panel (Single-Door)

Panel

Catalog

Number

Panel Size

Height x Width

A x B in.

AF6024HSWP

24.75 x 18.75

mm in.

C mm

Fits

Enclosure

Height x Width in.

mm

629 x 476 23.12

587 60.00 x 48.00 1524 x 1219

AF7224HSWP

30.75 x 18.75

781 x 476 29.12

740 72.00 x 48.00 1829 x 1219

AF7230HSWP

30.75 x 24.75

AF7236HSWP

30.75 x 30.75

781 x 629 29.12

740 72.00 x 60.00 1829 x 1524

781 x 781 29.12

740 72.00 x 72.00 1829 x 1829

A Center Post assembly and Center Bracket must be ordered separately.

3.18

(81)

B

3.18

(81)

B panel mounting center bracket

(sold separately)

(see illustration

2 page 184)

C

A hinge

C hinge swing panel bracket assembly included (see detail sheet page

186)

Full Swing Panel

Half Swing Panel

(lower mount) center post and panel mounting center bracket

(sold separately)

(see illustration 2 and 5 page 184)

Swing Panel Mounting

Note: Full Swing Panel and Half Swing Panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge swing panel bracket, and furnished with hardware necessary for side channel mounting. A Center Post assembly and Center

Bracket must be ordered separately. Panels can be installed so they hinge either on the left or right side. In addition, Half Panels can be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the front. With dual-access enclosures, Full and Half Swing Panels can be mounted back-to-back.

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

183

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Type 4

Miscellaneous Accessories

Illustration Sheet and Catalog Number

Catalog Number

AFSBRKT1

AFCBRKT3

AFCMH3

AFPSUP2

Discount Schedule: C2

Subclass: DS0

Miscellaneous Accessories

Description Illustration

Panel mounting side bracket

Panel mounting center bracket

Channel mounting hardware

Double-door panel support bracket

1

2

3

4

Quantity

1

3

3

2 channel spring nut panel nut center bracket side bracket panel mounting stud

Illustration 1

channel mounting hardware panel nut bracket mounting hardware bracket mounting hardware

Illustration 2

panel mounting stud channel spring nut center post channel mounting hardware

Illustration 3

panel bolt hardware panel bolt panel bolt hardware panel bolt panel nut install panel bolt in this hole for top of panel support

Illustration 4

channel mounting hardware panel support bracket channel spring nut center post panel nut panel mounting stud center post panel nut channel mounting hardware bracket mounting hardware bracket mounting hardware post bracket channel spring nut

Illustration 5

See catalog number page 181

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

184

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Free-Standing Enclosure Details

Type 4

Panel and Enclosure

Detail Sheet

2.87

(73)

Type 4 Panel Enclosures

Discount Schedule: C2

Subclass: DS0

enclosure width -5.75

(146)

2.87 min

(73)

3.00 min

(76)

Single Door

(section view showing full panels mounted back-to-back)

1

/

2 enclosure width -5.75

(146)

2.87 min

(73)

3.75 min

(95)

Double Door

(section view showing full panels mounted back-to-back)

2.87

(73)

CL

(of enclosure)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

185

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Details

Type 4

Swing Panel and Enclosure

Detail Sheet

Discount Schedule: C2

Subclass: DS0

enclosure width -6.06

(154)

2.87

(73)

2.87 min

(73)

5.00 min

(127)

3.18

(81)

Single Door

(section view showing swing panels mounted back-to-back)

3.18

(81)

1

/

2 enclosure width -6.06

(154)

2.87 min

(73)

5.00 min

(127)

Double Door

(section view showing swing panels mounted back-to-back)

2.87

(73)

CL

(of enclosure)

Notes: Cooper B-Line can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

186

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Rack Mounting Angles

Illustration Sheet and Catalog Number

Discount Schedule: C2

Subclass: DS0

Heavy Duty Rack Mounting Angles are designed for mounting 19”

(482mm) equipment in free-standing enclosures. A Center Post

Assembly, “AFxxCPS” on page 181, and a Panel Mounting Center Bracket, “AFCBRKT3” on page 184, (each sold sepa-

rately) are required when mounting in any double door enclosure. Mounting holes are spaced at the 19” “EIA” Standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 188.

L

Equipment Mounting Holes

To Accept #10-32, #12-24, or M6 Cage Nuts

(Sold Separately)

Note: L-shaped angles are universal and can be rotated to accommodate

19” or 23” EIA mounting equipment.

1.50

(38)

Catalog Fits Enclosure

Number Height

ES-48RMA-L in.

48

mm

1219

ES-60RMA-L

60 1524

ES-72RMA-L

ES-90RMA-L

‘L’ Shaped Mounting Angles

72

90

1829

2286

in.

42.00

54.25

66.50

78.75

L mm

1067

1378

1689

2000

Mounting

U’s

24

31

38

45

Kit contains two (2) full length ‘L’ angles, installation instructions, and hardware necessary to mount in single-door enclosures.

Yellow Zinc finish.

3.50

(89)

C

A

B

B

E

D

.375

(9)

Square

Hole

A = 1.75

(44)

B = .625

(16)

C = .500

(13)

D = .295

(7)

E = .250

(6)

Hole Pattern

Angle Profile

L

Equipment

Mounting Holes

To Accept #10-32,

#12-24, or M6

Cage Nuts

(Sold Separately)

1.44

(36)

O.D.

.75

(19)

2.29

(58)

1.50

(38)

O.D.

Catalog Fits Enclosure

Number Height

ES-48RMA-U in.

48

mm

1219

ES-60RMA-U

ES-72RMA-U

ES-90RMA-U

‘U’ Shaped Mounting Angles

60

72

90

1524

1829

2286

in.

42.00

54.25

66.50

78.75

L mm

1067

1378

1689

2000

Mounting

U’s

24

31

38

45

Kit contains two (2) full length ‘U’ angles, installation instructions, and hardware necessary to mount in single-door enclosures.

Yellow Zinc finish.

C

A

B

B

E

D

.375

(9)

Square

Hole

A = 1.75

(44)

B = .625

(16)

C = .500

(13)

D = .295

(7)

E = .250

(6)

Hole Pattern

1.625

(41)

O.D.

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

187

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Frames & Fasteners

Illustration Sheet and Catalog Number

Swing-Out Rack Mounted Frame

Catalog Fits Enclosure

Number Height

ES-48SORMF in.

48

mm

1219

ES-60SORMF

ES-72SORMF

ES-90SORMF

60

72

90

1524

1829

2286

in.

36.91

49.16

59.66

77.18

L mm

937

1248

1515

1960

Discount Schedule: C2

Subclass: DS0

Heavy Duty Swing-Out Rack Mounting Frames are designed for mounting 19”

(482mm) equipment in free standing enclosures. A Center Post Assembly, “AFxxCPS” on

page 181 and Panel Mounting Center Bracket, “AFCBRKT3” on page 184, (each sold separately) are required when mounting in any double door enclosure.

Mounting holes are spaced per the “EIA” Standard and are provided to accept

#10-32, #12-24, or M6 cage nuts (sold in packages of 100). Swing-Out Rack

Mounting frames have white powder coated finish.

Equipment

Mounting Holes

To Accept #10-32,

#12-24, or M6

Cage Nuts

(Sold Separately -

See Below)

L

C

Hole Pattern

A = 1.75

(44)

B = .625

(16)

C = .500

(13)

D = .295

(7)

E = .250

(6)

A

B

B

E

D

.375

(9)

Square

Hole

19.47

(494)

O.D.

Screws & Cage Nuts

Catalog

Number

Screws

E2MA1032PHMS100

E2MA1224PHMS100

E2MAM6PHMS100

Cage Nuts

E2MACN1032100

E2MACN1224100

E2MACNM6100

Description

#10-32 Phillips

#12-24 Phillips

M6 Phillips

#10-32 Threads

#12-24 Threads

M6 Threads

Sold in bags of (100)

Finish

Clear Zinc

Clear Zinc

Yellow Zinc

Clear Zinc

Clear Zinc

Yellow Zinc

Screws

Cage Nuts

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

188

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

Free-Standing Enclosure Accessories

Floor Stand & Stabilizer Kits

Illustration Sheet and Catalog Number

Discount Schedule: C2

Subclass: DS0

Catalog Number

Floor Stand Kits

Steel

MFK12

MFK16

MFK20

MFK24

A B in.

mm in.

mm

12.0

305 10.06

256

in.

-

C mm

-

16.0

406 14.06

357 -

20.0

508 18.06

459 8.00

203

24.0

610 22.06

560 10.00

254

Floor Stand Kits are intended for use with EnviroShield

Type 4X, Type 4 and Type 12 Enclosures where floor support is required. Each kit consists of two (10) gauge legs and hardware for mounting. At the base of each leg is a prepunched plate (see drawing). Steel kits have a gray polyester powder paint finish. Stainless steel kits are fabricated from 304 stainless steel. Standard

Floor Stand Kits are 12 inches (305 mm) high. For special heights, special material or nonstandard construction consult the factory.

4.62

(117)

9.87

(251)

12.00

(305)

7.87

(200)

Floor Stand Kit

4.62

(117)

A

CL

.50 D hole

(13)

B

7.87

(200)

Base 12 - 16 Deep

A

C .50 D hole

(13)

B

7.87

(200)

Base 20 - 24 Deep

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

189

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Type 4 Panel Enclosures

190

Electrical Enclosures

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement