Samsung | SDC-313A | Instruction manual | Samsung SDC-313A Instruction manual

SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
• SAMSUNG OPTO-ELECTRONICS AMERICA,INC.
ELECTRONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
TEL : +1-201-902-0347 FAX : +1-201-902-0429
• SAMSUNG TECHWIN MOSCOW OFFICE
Korp 14, 37-A, PR-KT, Lenningradsky, Moscow 125167, Russia
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297
•
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
• TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
•
P/No. : Z6806-0682-01A
VAN 05. 10
HIGH RESOLUTION COLOR CAMERA
INSTRUCTION MANUAL
SDC-313A SERIES
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and proper input
power voltage. In order to that you can understand this manual thoroughly,
we'll introduce our model description.
■ SDC-313A SERIES
• NTSC MODELS
SDC-313AND
SDC-313ANA
• PAL MODELS
SDC-313APD
SDC-313APA
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
■ MODEL DESCRIPTION
• SDC-313AXX
__ _
POWER SOURCE
SIGNAL SYSTEM
EXPORT MODEL
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
• SIGNAL SYSTEM
N --> NTSC MODEL
P --> PAL MODEL
INFORMATION -This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
• POWER SOURCE
D --> DC 12V
A --> AC 24V~
WARNING - Changes or modifications not expressly approved by the manufacturer
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
could void the user’s authority to operate the equipment.
WARNING : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Contents
8
Precautions
• LENS (selection)
• SHUTTER (condition and speed control)
20
20
21
23
24
• WHITE BALANCE control
25
• BACKLIGHT (Backlight Compensation)
26
• AGC (Auto Gain Control)
27
• SSNR (Samsung Super Noise reduction)
• SENS-UP (Low illuminance)
28
29
• SPECIAL
30
• EXIT
35
Camera Operation
Menu
Settings
Composition
10
Name and Function of Each Section
11
11
12
13
14
FRONT
SIDE
BOTTOM
BACK
15
Installation
15
18
19
Lens
Connecting to a monitor
Connecting to power
COLOR CCD CAMERA
4
User’s Manual
Troubleshooting
36
Specification
38
COLOR CCD CAMERA
5
User’s Manual
Features
Warning
The camera needs periodic inspection.
Horizontal Resolution 530 TV Lines
Contact an authorized technician for inspection.
Clear image quality has been achieved by employing a CCD with 410,000 pixels(NTSC), 470,000
pixels (PAL), which provides a horizontal resolution of 530 TV lines.
Electronic IRIS
Stop using your camera when you find a malfunction.
The electronic IRIS function enables continuous automatic control of the shutter between 1/60(1/50) ~
1/120,000 seconds.
If you use your camera around smoke or unusual heat for a long time, a fire
may be caused.
PRIVACY Function
The PRIVACY function conceals the areas you do not wish to appear on the screen.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
VIDEO/DC Drive Lens
The video drive lens and the DC drive lens can be selected by the touch of a switch.
Do not handle the camera with wet hands
High Sensitivity
It could cause an electric shock.
The built-in high sensitivity COLOR CCD enables a clear image even in 0.002 Lux(Sens-Up) illumination.
SSNR (Samsung Super Noise Reduction)
Do not disassemble the camera.
By using built-in SSNR function manufactured by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly reduced, and the signal-to-noise ratio(S/N) as well as
horizontal resolution have been improved, resulting in a clear and sharp image display even in the dark.
Controlled by OSD Menu
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
The camera can be controlled by selecting text displayed on the monitor screen.
It may result in fire or other hazards.
Additional Functions
SENS-UP, MOTION DETECTION, MIRROR, SHARPNESS and SYNC(INT/LL) functions are also available.
COLOR CCD CAMERA
6
User’s Manual
COLOR CCD CAMERA
7
User’s Manual
Precautions
Do not install under extreme
temperature conditions.
Do not install in high humidity
environment.
Use only under temperature conditions
between -10˚C and +50˚C. Provide good
ventilation when using in high temperature
conditions.
Do not install under unstable
lighting conditions.
May lower image quality.
Do not drop the camera or
subject it to physical shock.
May cause a product malfunction.
Never keep the camera face to
strong light directly.
May damage the CCD.
Do not expose the camera to
rain or other types of liquids.
Do not expose the camera to
radioactivity.
Avoid touching the camera lens.
Wipe dry any liquids. Liquids may contain
minerals that are corrosive to electronic
components.
Radioactivity exposure may damage the
CCD.
Notes
Severe lighting changes or flickering may
hinder normal camera operation.
COLOR CCD CAMERA
8
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
User’s Manual
• Exposure to a spotlight or an object emitting strong light may cause smear or
blooming.
• Ensure that the power source complies with normal specifications before supplying
it to the camera.
COLOR CCD CAMERA
9
User’s Manual
Names and Functions of Parts
Component
FRONT
1. HIGH RESOLUTION COLOR CAMERA
2. Auto iris lens connection plug
CCD protection cap
Please cover the CCD SENSOR when not using it.
3. C-Mount adaptor
C-Mount lens adaptor
Please attach the C-Mount lens here.
CS-Mount lens adaptor
Please remove the C-MOUNT lens adaptor and then attach it.
Back Focus clamp screw
Please loosen the clamp screw with a screwdriver before adjusting the Back Focal
length.
4. Instruction manual
COLOR CCD CAMERA
10 User’s Manual
COLOR CCD CAMERA
11 User’s Manual
Names and Functions of Parts
SIDE
BOTTOM
Mounting bracket screw hole
1/4"-20 UNC (20 THREAD)
Please use the screw hole when L:4.5mm±0.2mm (ISO standard),
fixing the camera onto the
or 0.197" (ASA standard)
mounting bracket. Please use
the clamp screw as specified below.
Auto iris lens connector
This is the connection terminal for the auto iris lens.
L
The mounting bracket can be separated and attached to the top of the
camera.
In this instance please do not tighten the screw to a depth of
more than 4mm, otherwise serious damage can occur to the
inside of the camera.
Notes
• This camera package does not include the mounting bracket. Please refer to the
user's manual for installation of the mounting bracket.
COLOR CCD CAMERA
12 User’s Manual
COLOR CCD CAMERA
13 User’s Manual
Names and Functions of Parts
Installation
Lens
BACK
Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and
C-Mount lens can be used.
Notes
• Please keep the lens clean.
• Any foreign objects and fingermarks on the lens can cause inferior image quality
in low light level conditions.
When using an auto iris lens
1. Please peel off about 8mm of the outer skin of the auto iris lens cable.
Auto iris lens selection switch
Please change the mode to DC or VIDEO depending on the type of auto iris
lens being used.
Video output terminal
Sends video signal and connects to the video input terminal of the monitor.
Power input terminal
Connects to the power appropriate to each model.
Setting button
•SETUP button : Used for the menu display. This button can be used to confirm
settings after changing the value of the selected function or
current conditions.
•UP & DOWN buttons : Used for selecting items by moving the cursor up or
down on the menu screen.
•LEFT & RIGHT buttons : Used when changing item values, by moving the cursor
to the left or right on the menu screen.
approx. 8mm
2. Please peel off about 2mm of the outer skin of the insulated conductor inside
the lens cable.
approx. 2mm
Power lamp
Lights up when the correct power is supplied to the camera.
COLOR CCD CAMERA
14 User’s Manual
COLOR CCD CAMERA
15 User’s Manual
Installation
3. Please remove the cover of the auto iris lens connection plug and solder the
lens cable to the connector pin in the plug.
LENS
Pin No.
DC
DampingDamping+
Drive+
Drive-
No.1 Pin
No.2 Pin
No.3 Pin
No.4 Pin
VEDIO
Red (power)
NC
White (video signal)
Black (GND)
Lens cable
No.3 Pin
No.1 Pin
Connector
When using a C-Mount lens
Please take off the CCD protection cap and attach the
C-Mount lens to the camera by screwing it in clockwise.
C-mount adaptor
When using a CS-Mount lens
1. Please take off the CCD protection cap and
C-mount adaptor.
C-mount adaptor
No.4 Pin
No.2 Pin
CCD protection cap
4. Please replace the auto iris lens connection plug cover and take off the CCD
protection cap, and then attach the auto iris lens to the camera by screwing
it in clockwise.
5. Please insert the connection plug that is
connected to the auto iris lens cable into
the auto lens connector, which is located on
the side of the camera.
6. Please set the lens selection switch, located on the
side of the camera, to DC or VIDEO depending on the
type of auto iris lens which is being used.
COLOR CCD CAMERA
16 User’s Manual
2. Please attach the CS-Mount lens to the camera by
screwing it in clockwise.
C-mount adaptor
Notes
• Please use the specified lens connection parts as shown in the picture below.
The use of the wrong sized parts of the wrong size may cause
damage to the inside of the camera or result in poor fitting.
• Use of a lens which is too heavy affects the balance of the
camera and may cause a malfunction. Please use a lens
that weighs less than 450g.
• Please select Av mode if possible when adjusting the
C-mount lens : 10 mm or less
automatic light control (ALC) of an auto lens. Use of PK
CS-mount lens : 5 mm or less
mode may cause hunting.
COLOR CCD CAMERA
17 User’s Manual
Installation
Connecting to a Monitor
Connecting to Power
Please connect the video output terminal located on the back of the camera to the
monitor.
Each model has a different power input specification.
Please check the model type and standard power requirement before connecting
to power.
AC Power Type (AC 24V, 300mA)
Use AC24V, 300mA adaptor.
For SDC-313ANA/SDC-313APA.
CCD Camera
Monitor
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and
select 75Ω for the Intermediate device as shown in the picture below.
DC Power Type (DC 12V, 500mA)
Use DC12V, 500mA adaptor.
For SDC-313AND/SDC-313APD.
CCD Camera
Intermediate
End monitor
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG)
#24(0.22mm2)
#22(0.33mm2)
#20(0.52mm2)
#18(0.83mm2)
Resistance value(Ω/m)
0.078
0.050
0.030
0.018
Voltage drop(V/m)
0.028
0.018
0.011
0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
Standard voltage for camera operation : DC 12V±10%
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
COLOR CCD CAMERA
18 User’s Manual
COLOR CCD CAMERA
19 User’s Manual
Camera Operation
Camera Operation
Menu
Settings
Settings can be made using the 5 buttons located on the back of the camera.
SETUP menu
LENS (selection)
· MANUAL · DC/VIDEO
SHUTTER (Conditon and speed control) · ESC
· MANUAL · FLK
WHITE BALANCE control
· ATW
· AWC
· MANUAL
BACKLIGHT
(Backlight compensation)
· OFF
· LOW
· MIDDLE
AGC (Auto Gain Control)
· OFF
UP button
LEFT button
SETUP button
RIGHT button
· HIGH
DOWN button
· LOW
· MIDDLE
· LOW
· MIDDLE
· HIGH
SSNR
(Samsung super noise reduction)
· OFF
SENS-UP (Low illuminance)
· OFF
SPECIAL
· CAMERA ID
· SYNC
· MOTION DET
· PRIVACY
· MIRROR
· SHARPNESS
· RESET
· RETURN
1. Please press the SETUP button
• Settings can now be made. The SETUP menu is displayed on the monitor.
· HIGH
EXIT
· AUTO
2. Please select any function you wish to activate by using the UP and DOWN
buttons.
• The arrow can be moved up or down by using the UP and DOWN buttons.
Please position the arrow to point to the function you wish to operate.
COLOR CCD CAMERA
20 User’s Manual
COLOR CCD CAMERA
21 User’s Manual
Camera Operation
LENS (selection)
Select any function you
wish to operate by
using the UP and
DOWN buttons.
Modes can be changed
using the LEFT and
RIGHT buttons.
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow
to point to 'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or
RIGHT button.
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode
you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Notes
• If appears at the mode you wish to operate, it means that there is a submenu which can be selected by pressing the SETUP button.
• If---appears at the mode item, it means that there is no mode available to be
selected.
DC/VIDEO: Auto iris lens selection
Notes
• When using an auto iris lens, the setting of the auto iris lens selection switch,
located on the back of the camera, must be on DC or
VIDEO depending on the type of the lens which is
being used. (Please refer to the picture on page 15)
• The brightness of the screen can be adjusted in DC
mode. The brightness can be adjusted within the
range of 1 ~ 70. The optimum level of brightness for
the user can be achieved by adjustment.
MANUAL: Manual lens selection
3. Please press the SETUP button if you wish to return to the previous menu.
COLOR CCD CAMERA
22 User’s Manual
COLOR CCD CAMERA
23 User’s Manual
Camera Operation
SHUTTER (condition and speed control)
Because of using the DC lens, the shutter speed is fixed at 1/60.
1. When the SETUP menu is on the screen, please position the arrow to point
to 'SHUTTER' by using the DOWN button.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
WHITE BALANCE control
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
FLK: Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency. NTSC Model:1/100, PAL
MODEL: 1/120
ESC: Auto control of the shutter speed can be achieved. When ESC mode is on, the
speed is controlled automatically according to the brightness of the screen.
MANUAL: The shutter speed can be controlled manually.
*Please select one of the 3 modes below.
3. Please select 'MANUAL' mode if you wish to adjust the shutter manually.
• You can select speed from ‘1/60’ to ‘1/120,000’sec (NTSC Models), ‘1/50’
to ‘1/120,000’sec (PAL Models).
4. Please press the SETUP button when all the settings are complete.
ATW(Auto Tracking White Balance): This mode can be used within the color
temperature range 1,800°K ~ 10,500°K (Ex. fluorescent light, outdoor, sodium
vapor lamp or inside tunnels)
AWC(Auto White Balance Control): Please press the SETUP button while the
camera is directed at a piece of white paper to obtain the optimum state under
current illumination. If the environment including the light source is changed, you
have to adjust the white balance again.
MANUAL: The manual adjustment mode enables finer adjustment. Please select
ATW or AWC first. Please change to manual adjustment mode and press the SETUP
button. Please set the appropriate color temperature, and then increase or decrease
the red and blue color values while monitoring the color changes on the object.
Notes
Notes
• When selecting DC/VIDEO lens, the shutter speed is fixed at 1/60 (1/50).
• While using the internal synchronous system, if the shutter setting is on
'ESC' and the camera is directly facing a bright fluorescent light, the image on
the screen can be adversely affected. Therefore please choose the installation
location with care.
• When 'MANUAL' mode is on, the SENS UP function does not operate.
COLOR CCD CAMERA
24 User’s Manual
•Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
When the object’s surroundings have a very high color temperature (Ex. a clear sky and sunset)
When the object’s surroundings are dark
If the camera directly faces a fluorescent light or is installed in a place where there are
considerable changes in illumination, the WHITE BALANCE function may become unstable.
COLOR CCD CAMERA
25 User’s Manual
Camera Operation
BACKLIGHT (Backlight Compensation)
When there is a strong backlight behind the object, clear images of the background
as well as the object can still be obtained by using the BACKLIGHT function.
1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
HIGH/MIDDLE/LOW: You can adjust the sensitivity of Backlight Compensation.
OFF: BACKLIGHT function does not operate.
BACKLIGHT ON
AGC (Auto Gain Control)
1. Please position the arrow to point to 'AGC' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button. As the level of gain increases, the screen gets brighter and the level
of noise also increases.
HIGH: The gain increases or decreases within the range of 6dB ~ 34dB.
MIDDLE: The gain increases or decreases within the range of 6dB ~ 30dB.
LOW: The gain increases or decreases within the range of 6dB ~ 18dB.
OFF: The gain is fixed at 6dB.
3. Please press the SETUP button. The BRIGHTNESS can be adjusted within the
range of 1~70.
BACKLIGHT OFF
4. Please press the SETUP button when all the settings are complete.
COLOR CCD CAMERA
26 User’s Manual
COLOR CCD CAMERA
27 User’s Manual
Camera Operation
SSNR (Samsung Super Noise reduction)
The background noise in the low light level decreases automatically as the level
of gain changes.
1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
SENS-UP (Low illuminance)
SENS-UP helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
1. Please position the arrow to point to 'SENS-UP' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
AUTO: Low light level auto mode
OFF: The function does not operate.
Notes
• When SHUTTER is in the manual mode, SENS-UP does not operate.
OFF: There is no reduction in noise level.
LOW: There is a small reduction in noise level with almost no ghost image.
MIDDLE: The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost imaging.
HIGH: The level of noise is reduced greatly, however there is an increase in ghost
imaging.
Notes
• When AGC is turned off, SSNR does not operate.
COLOR CCD CAMERA
28 User’s Manual
3. Please press the SETUP button when all the settings are complete.
Notes
•The maximum storage magnification in low light level can be adjusted by pressing
the SETUP button in 'AUTO' mode.(X2~X128)
•As the magnification increases, the screen gets brighter; moving object gets more
afterimage.
•If storage magnification is increased while SENS UP is operating, it may cause noise,
and spots may appear; however this is normal.
COLOR CCD CAMERA
29 User’s Manual
Camera Operation
3) Please press the SETUP button.
SPECIAL
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using
the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the UP or DOWN
button.
4) Up to 15 letters can be used for the ID.
Please move the cursor to the letter you wish to choose by using the UP and
DOWN button.
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
CAMERA ID: If the ID is input, the camera ID appears on the monitor.
1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN
button.
2) Please select 'ON' by pressing the LEFT or RIGHT button.
Notes
• If 'OFF' is selected, the ID does not appear
on the monitor even if it has been input.
Select an ID from A, B~Y, Z, a, b~y, z, 0,1~8, 9 by using the UP, DOWN, LEFT
and RIGHT buttons.
Please lock in the letters by using the SETUP button.
•When the letter is locked in, the cursor moves to the next space.
Please repeat the above to input the ID.
Notes
•If the wrong name has been input.....
If you press the SETUP button after moving the cursor to CLR, all the letters will be
erased. If you want to correct a letter, please move the cursor to the arrow at the
bottom left of the screen and press 'SET'.Please position the cursor above the letter
you wish to correct, and then move the cursor onto the letter you wish to choose
and press the SETUP button.
COLOR CCD CAMERA
30 User’s Manual
COLOR CCD CAMERA
31 User’s Manual
Camera Operation
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
The name will appear at the top left hand
corner.
Notes
• When the power frequency is 50Hz, you can not use line-lock mode (NTSC Models).
• When the power frequency is 60Hz, you can not use the line-lock mode (PAL Models).
• ‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
FRONT DOOR
to Locate, then SET
Please find the position you wish to display the
name by using the 4 directional buttons,
and then press the SETUP button.
FRONT DOOR
to Locate, then SET
6) Please select 'END' and then press the SETUP button to complete ID input.
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between
cameras without a synchronous generator. The line-lock synchronization is only
used in the areas of 60Hz (NTSC Models) / 50Hz (PAL Models).
- INT : Internal synchronization - LL : External line-lock synchronization
COLOR CCD CAMERA
32 User’s Manual
• If you choose ‘LL’, you can adjust the desired phase.
Press the SET button.
• You can adjust the desired phase from 0 to 359.
MOTION DETECTION:
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words 'MOTION DETECTED' appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object's movement by sensing
disparity of outline, and level of brightness and color.
• Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
• Please select the area you wish to observe from the 4
areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be observed by
using the UP, DOWN, LEFT or RIGHT button.
•Please press the SETUP button to save the changes and complete the setting.
Notes
•There is no ‘MD’ output signal. ‘MD’ is on screen display only words.
COLOR CCD CAMERA
33 User’s Manual
Camera Operation
PRIVACY: This modes conceals the areas you do not wish to appear on the screen.
- OFF : Cancels the PRIVACY mode.
- ON : Operates the PRIVACY mode.
•Please press the SETUP button.
•Please select the area you do not wish to appear from the 4 areas in AREA SEL mode.
•Please select ON mode for the chosen area.
•Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or
RIGHT button.
SHARPNESS: The outline of the video image becomes cleaner and more distinctive
as the level of SHARPNESS increases. If the level goes up excessively,
however, it may affect the video image and generate noise.
•Please press the SETUP button.
•The available range of level is 0 ~ 31.
RESET: Returns to the level which was set by the manufacturer for shipment.
RETURN: Returns to the SETUP menu.
MIRROR
- ON : Sets a horizontal image inversion.
- OFF : Cancels the inversion.
EXIT
Saves all the setting menus and then exits.
MIRROR ON
COLOR CCD CAMERA
MIRROR OFF
34 User’s Manual
COLOR CCD CAMERA
35 User’s Manual
Troubleshooting
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
Nothing appears on
the screen.
The video image is
not clear.
The screen is dark.
There is a problem with the
camera operation. The
camera surface is too hot
and black stripes appear on
the screen.
COLOR CCD CAMERA
Solution
• Please check the power connection.
• Please check the video signal line connection.
• Please check and make sure that the auto lens
switch is set to DC (VIDEO) when using a DC
(VIDEO) lens.
• Please check the Brightness of Auto Iris lens.
• Please check if the lens is clean.
Please clean the lens with a clean cloth or brush.
• Please adjust the contrast feature of the
monitor.
• Please make sure that the screen is not exposed
directly to a bright light.
Please move the camera if necessary.
• Please readjust the back focus of the camera.
• Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/
Hi-z properly, and check the terminals. (refer to
page 18)
• Please check if an auto iris lens is being used
and adjust the brightness level.
Problem
Solution
The MOTION
DETECTION function
is not working.
• Please check if 'MOTION DETECTION' mode is
turned on.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Colors are not quite
right.
• Please check the 'WHITE BAL' setting. (Please
refer to page 25)
The screen is
flickering.
• Please check if the camera is facing directly into
sunlight or fluorescent light.
• Please check if an auto iris lens is being used.
• Please check the connection of the lens connector
cable.
L/L mode isn't able to
be selected.
• Have you connected your camera to DC power
source? Connect it to AC power source.
L/L mode is not
available.
• Please check the frequency of power supply
(60Hz for NTSC, 50Hz for PAL).
SENS-UP function is
not working.
• Please check if the AGC menu is set to the OFF
position.
• Please check if the SHUTTER menu is set to
MANUAL mode.
• Please check the limit of SENS-UP AUTO mode.
• Please check if an appropriate power source to
the camera complies with the manufacturer's
standard requirement, or if the voltage keeps
changing.
36 User’s Manual
COLOR CCD CAMERA
37 User’s Manual
DECLARATION OF CONFORMITY
Specifications
Item
Power Source
C
C
D
S
y
n
c
SDC-313ANA
SDC-313AND
SDC-313APA
AC24V, 60Hz
DC12V
AC24V, 50Hz
DC12V
3.5W(Max)
2.5W(Max)
3.5W(Max)
2.5W(Max)
Total Pixels
811(H) x 508(V)
Effective Pixels
768(H) x 494(V)
Size
1.0Vp-p/75Ω
1.0Vp-p/75Ω
50dB (AGC OFF, Weight ON)
Min. Illumination
0.3Lux/F1.2, 0.002Lux/F1.2(Sens-UP X128)
Gain Control
LOW/MIDDLE/HIGH/OFF Selectable
White Balance
ATW/AWC/MANUAL(1,800°K~10,500°K)
Backlight Compensation
Electronic shutter speed
Equipment Type/Environment
CCTV Camera
Model Name
SDC-313APA, SDC-313APD
Beginning Serial NO.
S5110001
Year of Manufacture
2005. 11. 1
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
LOW/MIDDLE/HIGH/OFF Selectable
AUTO/MANUAL(1/50~1/120,000 sec)
AUTO/MANUAL(1/60~1/120,000 sec)
SENS-Up
OFF/AUTO (selectable limit X2 ~X128)
O.S.D
Built-in
Motion Detection
SSNR
We, the undersigned, hereby declare that the equipment specified above conforms
ON / OFF (4 Programmable Zone)
LOW/MIDDLE/HIGH/OFF Selectable (Noise Control)
MIRROR
to the above Directive(s).
OFF/ON(Horizontal Image Inversion)
Privacy Function
ON/OFF (Level adjustable)
IRIS Control
DC / VIDEO
C/CS Mount (Changeable)
Dimension
58(W) x 52(H) x 121(D)mm
Operationg temperature/Humidity
COLOR CCD CAMERA
310g
38 User’s Manual
340g
Legal Representative in Europe
Full Name
YOUNG TAEK SON
Full Name
Position
QUALITY CONTROL MANAGER
Position
Place
CHANGWON, KOREA
Place
Date
2005. 11. 1
Date
Signature
-10°C ~ +50°C [14°F~122°F] / 30~80% RH
340g
SAMSUNG TECHWIN CO., LTD
Manufacturer
ON / OFF (4 Programmable Zone)
Sharpness
Lens Mount
Weight
European Representative Address
INT
0~359°(Adjustable)
More than 530 TV Lines
S/N (Y signal)
SAMSUNG TECHWIN CO., LTD
KYUNGNAM, KOREA, 641-120
Horizontal:15.734 KHz Vertical :59.94HzHorizontal: 15.625 KHz Vertical : 50Hz
Video Output
Manufacturer's Address
European Representative Name
INT/LL Selectable
INT
Resolution
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
2:1 Interlace
INT/LL Selectable
0~359°(Adjustable)
89 / 336 / EEC
Manufacturer's Name
752(H) x 582(V)
Scanning System
Synchronization
Application of Council Directive(s)
795(H) x 596(V)
1/3'' Super HAD color CCD
Frequency
E
L
E
C
T
R
I
C
A
L
SDC-313APD
310g
Signature
Download PDF