I N S TA L L AT I O N Part# Included
I N S TA L L AT I O N
A n t e n n a M o u n t F l a g p o l e 4233
CUSTOMER SERVICE
877.370.3604 (toll free)
F o r GL 1 8 0 0
Fi t s : ‘ 01 - u p GL 18 00 wi th stock antenna or other round mount u p to 0.6” in
diameter
Part#
4233
304233
Included
1
1
Flag Pole Assembly
Installation Instructions
LIMITED WARRANTY
Please read and understand entire instructions before starting installation.
Thank you for choosing Küryakyn!
Allen wrenches.
• The product must be properly installed,
maintained and operated under normal conditions.
PLEASE NOTE
It is the installers’ responsibility to make sure all fasteners (including pre-assembled) are
tightened before operation of motorcycle. Küryakyn will not warranty components that are
lost due to improper installation. Periodic maintenance may be required.
Procedure
STEP 1 Slip the mounting clamp over the antenna; position the bracket in either the
knurled area or below the black plastic insert, then tighten the set screw. See PIC.1.
Note
If you experience any radio interference, adjust the position of the clamp on the
antenna while the radio is on. Choose a position that does not interfere with radio reception.
STEP 2 To change the flag, unscrew the tip cap from the pole; be sure not to lose the
tensioning spring inside the tip cap. See PIC.1. Remove the flag and replace with another; resecure the tip cap.
PIC.1
TIP
Cap
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
set
screw
Bl ack pl astic
insert
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the ”CATALOGS” icon. Each Küryakyn®
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
knurled
area
4233-11GL-1106
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the following provisions:
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
Tools Suggested
Ride On!
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement