Asko | T712 | Specifications | Asko T712 Specifications

2007 Product & Design Guide
Version 1.0
1
#
IN MORE WAYS
THAN ONE
TABLE OF CONTENTS
Dishwashers
Planning & Design
Key Selling Features..............................2
Dishwashers
D3112 .................................................15
D3251FI ..............................................15
D3122XL .............................................16
D3432XL .............................................16
D3232XL .............................................16
D3251XLHD.........................................16
D3531XLHD.........................................16
D3731XLHD.........................................16
D3232XLFI ..........................................17
D3251XLFI ..........................................17
D3531XLFI ..........................................17
D3731XLFI ..........................................17
Fitting the D3232XLFI, D3251XLFI,
D3531XLFI and D3731XLFI Custom
Door Panel (4-in Toe Kick) .................18
Fitting the D3251FI Custom Door
Panel (6-in Toe Kick) .........................19
D3232XLFI, D3251XLFI, D3531XLFI,
D3731XLFI and D3251FI Custom
Panel Installation Options ..................20
XLFI Trim Kit Installation Options .........20
D3112...................................................3
(Front Panel Configuration)
D3122XL...............................................3
(Front Panel Configuration)
D3432XL...............................................3
(Front Panel Configuration)
D3232XL / D3232XLFI..........................4
(Integrated Handle Configuration and
Fully Integrated Configuration)
D3251XLHD / D3251FI / D3251XLFI....4
(Handle Configuration and
Fully Integrated Configurations)
D3531XLHDSS / D3531XLFI.................5
(Handle Configuration and
Fully Integrated Configuration)
Encore
D3731XLHDSS ......................................6
D3731XLFI ............................................6
Accessories...........................................7
EasyInstall Dishwashers ........................8
Laundry: Washers
Laundry: Washers
W6222 ................................................21
W6461 ................................................21
Key Selling Features..............................9
W6222 ................................................10
W6461 ................................................10
Laundry: Combination Washer/Dryer
WCAM1812 .........................................22
Laundry: Combination
Washer/Dryer
WCAM1812 .........................................11
Laundry: Dryers
T712 ...................................................23
T731 ...................................................23
T712C .................................................24
T741 ...................................................24
Accessories.........................................11
Laundry: Dryers
Key Selling Features............................12
T712 ...................................................13
T712C .................................................13
T731 ...................................................13
T741 ...................................................13
DC7171 Drying Cabinet.......................14
Accessories.........................................14
ASKO dishwashers and washers
meet the Energy Star® requirements.
1
Stacked Pair/Drying Cabinet
Installations
W6222/T712, W6461/T731 .................25
W6222/T712C, W6461/T741 ...............26
DC7171...............................................27
Cabinet/Closet Installations
Drying Cabinet with Stacked Cabinet
Installations.......................................27
Stacked Installations ...........................28
Single Unit Installations .......................29
Side-by-side Installations ....................30
DISHWASHERS
Key Selling Features ( ♦ Exclusive ASKO Features)
★
★
★
★
★
★
♦ 20-year life expectancy
♦ The Quiet SystemTM ensures this is the
quietest line of dishwashers (50 dBA or
better) – D3000 series is even 12%
quieter than previous models
♦ Exclusive EasyInstall system makes
installations quicker and easier. Now
with a rear foot that’s adjustable from
the front
♦ Anti-jam, auto-reversing drain pump
reduces service calls
♦ More 18:9 surgical quality stainless
steel components than any other
dishwasher (tank filters, spray arms,
entire tank, inner door and guide rails)
♦ One-piece, sealed, galvanized-steel
base pan
♦ AquaSafeTM containment system helps
to prevent damage to property
♦ Counter-saving trim strip (XL models;
optional for FI models)
• D3112 and D3251FI are height
adjustable from 32-1/4" to 35-1/2",
and are ADA (Americans with
Disabilities Act) height-compliant
• D3232XLFI, D3251FI, D3251XLFI,
D3531XLFI and D3731XLFI accept
custom door panels
• Every unit 100% factory tested
• In-line, hidden heating element. No risk
of melting plastic items
• Check valve prevents drain flowback
♦ Uses 50% less electricity than any
other dishwasher, as few as 194 kWh
♦ Lowest water consumption, using
under 5 gallons in a Normal program
and as little as 2.4 gallons in the Quick
Wash program
• Separate drain and circulation pumps
and motors reduce noise and energy
and water consumption
♦ Patented Self Cleaning System produces
sparkling results without hand pre-rinsing
♦ Self-cleaning triple filtration system
♦ 7SprayTM or 8SprayTM wash systems
ensure that water reaches everywhere
in the tank, corner to corner and top
to bottom
♦ PowerZoneTM Pots and Pans ensures
that the toughest soil gets removed
better than if done by hand
♦ PowerZoneTM Cutlery Basket thorougly
cleans everything in the cutlery basket
♦ AquaLevelTM sensor adds water
automatically if a bowl or glass turns
over and collects water
• Adjustable rinse agent dispenser with
indicator
• Balanced door remains in whatever
position is most convenient, e.g., open just
far enough to load/unload the top rack
• Four-way adjustable toe kick to line up
with cabinetry
• 1/2-load Wash allows you to wash either
the upper or lower rack separately;
ideal for small loads (select models)
♦ Auto wash (D3531XL) – No-worry wash
adjusts temperatures and wash times
automatically for sparkling dishes. And,
first dishwasher that automatically
controls dryness.
• SensiCleanTM (D3531XL) sensorcontrolled washing
♦ SensiDryTM (D3531XL) sensor-controlled
drying
♦ Mix wash (D3531XL) – Wash pots &
pans in the lower rack and delicates in
the upper rack at the same time
♦ CoolTouch (D3531XL) cools dishes to
room temperature so hot dishes won’t
hurt hands
• End-of-program signal for hidden
control models
• Express Wash reduces time and energy
usage
• FlexiRacksTM that hold 12+ International
place settings
• Viscant™-coated baskets with doublecoated tine ends
• Deep upper rack holds salad plates and
tall ice tea glasses as well as stemware
• Lower rack holds 12" plates
• Removable cutlery basket with lidded
small items compartment
• Lower rack rolls completely out of unit
for easy access
• Upper rack holds 9-1/2" plates
(XL models)
• Accepts second cutlery basket, so
stainless steel and silver items can be
washed separately
(See individual model specifications for details.)
Encore Dishwasher
D3530FI Dishwasher
Warranty:
3 YEARS: All parts and labor
5 YEARS: Parts for solid state controls, timers, motors, pumps and racks
LIFETIME: Stainless steel tank
(See Warranty Certificate for complete details.)
D3000 Dishwashers
2
D3112 (ADA Tank) (Front Panel Configuration)
COLORS
SKUs
SHIPPING WT
Black
White
Bisque
Stainless Steel
D3112B
D3112W
D3112Q
D3112SS
96 lbs
96 lbs
96 lbs
96 lbs
Key Features ( ♦ Unique ASKO Features)
♦ Unique push-button controls
• 7SprayTM wash system delivers
superior cleaning
• Cycle progression indicator
• Adjustable stemware rack
• KidLockTM prevents child from
opening door
• Five temperatures: 85°, 120°, 130°,
150°, and 160° F
• Four wash programs
D3122XL* (Front Panel Configuration)
COLORS
SKUs
Black
White
Stainless Steel
D3122XLB
D3122XLW
D3122XLSS
104 lbs
104 lbs
104 lbs
SHIPPING WT
Key Features ( ♦ Unique ASKO Features)
♦ Unique push-button controls
• 7SprayTM wash system delivers
superior cleaning
• Turbo Fan Drying System
• Upper rack holds 9-1/2" plates
• Cycle progression indicator
• Adjustable stemware rack
• KidLockTM prevents child from
opening door
• Five temperatures: 85°, 120°, 130°,
150°, and 160° F
• Four wash programs
• Fold-down tines in lower basket
D3432XL* (Front Panel Configuration)
COLORS
SKUs
Black
White
Stainless Steel
D3432XLB
D3432XLW
D3432XLSS
107 lbs
107 lbs
107 lbs
SHIPPING WT
Key Features
•
•
•
•
•
•
3
7SprayTM wash system
Hidden push-button controls
Turbo Fan Drying System
Upper rack holds 9-1/2" plates
End-of-program signal
Adjustable stemware rack
* XL models feature a new tall tank.
• Sleek, easy-to-clean control panel
• Seven temperatures: 85°, 105°, 120°,
130°, 150°, 160°, and 170° F
• Six wash programs
• 5-hour delay
D3232XL*/D3232XLFI*
INTEGRATED HANDLE CONFIGURATION
FULLY INTEGRATED CONFIGURATION
Stainless Steel
Optional Panel**
D3232XLSS
D3232XLFI
113 lbs
108 lbs
COLORS
SKU
SHIPPING WT
Key Features
Integrated handle configuration
• Turbo Fan Drying System
• Intergrated handle with TouchProof™
Stainless Steel (SS Model)
• Accepts owner-supplied one-piece
custom door panel (FI Model)
• Accepts optional one-piece door
(FI Model)
• KidSafeTM prevents child from changing
programs
• Hidden push-button controls
•
•
•
•
•
•
•
•
Rinse aid indicator light on panel
Adjustable stemware rack & knife guard
Upper rack holds 9-1/2" plates
Seven temperatures: 85°, 105°,120°,
130°, 150°, 160°, and 170° F
Six wash programs
7SprayTM wash system delivers superior
cleaning
Delay start: 5 hours
End-of-program signal
D3251XLHD*/D3251FI/D3251XLFI*
HANDLE CONFIGURATION
FULLY INTEGRATED CONFIGURATIONS
COLORS
Stainless Steel
Optional Panel**
Optional Panel**
SKU
D3251XLHDSS
D3251FI (ADA Tank)
D3251XLFI
116 lbs
101 lbs
108 lbs
SHIPPING WT
Key Features
Handle configuration
•
•
•
•
•
•
•
D3251 shown with optional custom door panel.
•
•
•
AquaLevelTM Sensor monitors wash water
Turbo Fan Drying System
SteamSafeTM controls escaping steam
Straight towel bar handle with
TouchProof™ Stainless Steel (HD Model)
Accepts owner-supplied one-piece
custom door panel (FI Models)
Accepts optional one-piece door, as
shown ((FI Models, see accessories)
KidSafeTM prevents child from changing
programs
Hidden push-button controls
Rinse aid indicator light on panel
Adjustable stemware rack
* XL models feature a new tall tank.
• Knife Guard
• Upper rack holds 9-1/2" plates
(XL Models)
• Seven temperatures: 85°, 105°,120°,
130°, 150°, 160°, and 170° F
• Six wash programs
• 1/2 Load washing, upper or lower
basket only
• Express Wash reduces program time
and saves energy
• 7SprayTM wash system delivers superior
cleaning
• Delay start: 5 hours
• End-of-program signal
**Panel installation instructions on pages 19-21.
4
D3531XLHD*/D3531XLFI*
HANDLE CONFIGURATION
FULLY INTEGRATED CONFIGURATION
COLORS
Stainless Steel
Optional Panel **
SKU
D3531XLHDSS
D3531XLFI
125 lbs
117 lbs
SHIPPING WT
Key Features ( ♦ Unique ASKO Features)
Handle configuration
♦ Mixed Load cycle washes delicate items
on top and pots and pans on bottom
♦ Safe & HandyTM Upper Cutlery Basket
♦ CoolTouch system cools items after dry
cycle
♦ Interior light
♦ SensiCleanTM – sensor-controlled
washing program (Auto Wash)
♦ SensiDryTM – sensor-controlled drying
program (Auto Wash)
♦ LCD display
• Upper rack holds 9-1/2" plates
• 10 wash programs
• Nine wash & rinse temperatures from
Cold to 170º F
• 8SprayTM wash system delivers superior
cleaning with minimal water usage
• China guard
• Adjustable tines in upper & lower racks
• Split cup shelf
• Straight towel bar handle with
TouchProof™ Stainless Steel (HD Model)
• Accepts owner-supplied one-piece
custom door panel (FI Model)
• Accepts optional one-piece door, as
shown (FI Model, see accessories)
• Delay start: 1/2 to 24 hours
Shown with optional custom door panel.
5
* XL models feature a new tall tank.
**Panel installation instructions on pages 19-21.
Encore
HANDLE CONFIGURATION
FULLY INTEGRATED CONFIGURATION
COLOR
Stainless Steel
Optional Panel**
SKU
D3531XLHDSS*
D3731XLFI*
125 lbs
117 lbs
SHIPPING WT
Key Features ( ♦ Unique ASKO Features)
Handle configuration
♦ Patented PowerZones™ (2)
♦ Exclusive Easy Install System
♦ Interior light eases loading and
unloading
• Hidden controls
• Self-cleaning triple filtration system
• Separate circulation and drain pumps
• 7 Spray™ System
• AquaLevel™ Sensor monitors
wash water
• Nine wash & rinse temperatures
from Cold to 170º F
• Six programs
• Express option
• Delay start: 1/2 to 24 hours
• Turbo Fan Drying System
• FlexiRacks™ ensure random loading
• Removable inserts (4) for lower baskets
• Adjustable stemware inserts (3)
• Adjustable dinnerware insert (1)
• Lower basket holds thick/heavy,
14" plates
• Adjustable upper cutlery basket
• 18:9 stainless steel tank, filter and
spray arms
• In-line (hidden) SS heating element
• Anti-jam, auto-reversing drain pump
• Galvanized steel base pan
• Balanced door eases loading & unloading
• SteamSafe™ controls escaping steam
• KidSafe™ prevents changing programs
• Adjustable end-of-program signal
• Straight towel bar handle with
TouchProof™ Stainless Steel (HD Model)
• Accepts owner-supplied one-piece
custom door panel (FI Model)
• Accepts optional one-piece door, as
shown (FI Model, see accessories)
Shown with optional custom door panel.
* XL models feature a new tall tank.
**Panel installation instructions on pages 19-21.
6
OPTIONAL DISHWASHER ACCESSORIES
Curved Handle for Fully Integrated Dishwashers
8073718-0 White
8073718-84 Bisque
8073718-29 Black
8073718-82 Brass-Like
8073718-95 Stainless Steel
One-Piece Door with Handle for FI Dishwashers
XLFI:*
8080306-0
8080306-86
8080306-91
8080172-91
D3251FI:*
D3251FI:
(28-1/4" H x 23-3/8" W x 5/8" D)
(30-1/8" H x 23-3/8" W x 5/8" D)
8080303-0 White
8075367-0 White
8080303-86 Black
8075367-86 Black
8080303-91 Stainless Steel**
8075367-84 Bisque
8080169-91 Stainless Steel**
8075367-95 Stainless Steel
with straight handle
Panel extends approx. 2"
8078981-91 Stainless Steel**
above controls.
with integrated handle See page 20 for specifications.
See page 20 for specifications.
*Panels mount flush with top of control panel. **New TouchProof™ Stainless Steel.
White
Black
Stainless Steel**
Stainless Steel**
with straight handle
8080109-91 Stainless Steel**
with integrated handle
See page 19 for specifications.
XLFI Top & Side Fill Strips, Stainless Steel
8077317-95 (Works with 8076697 ASKO door panels)
8078982-95 (Works with owner supplied custom panels)
Attaches to top and sides of XLFI models to allow installations in 24" wide openings.
Includes counter-saving top trim strip. See page 21 for installation instructions.
ADA FI Side Fill Strips, Stainless Steel
Only available for D3251FI
8075045-95
Fills gap when FI unit installed in 24" wide opening. Kit includes both left- and right-side strips.
Metal Top Fill Strip
Only available for D3251FI (Works with 8076697 ASKO door panels)
8073869-95
Attaches to top of FI units and fills gap between tank and counter top.
Dishwasher Tip Guard
8070851
Secures dishwasher when it’s not possible to attach it to cabinetry or counter top. Sold individually.
Heavy-Duty Door Springs for FI Dishwashers
8060232-77 (Yellow); Standard Tank, 3-12 lbs.; XL Tall Tank, 1-8 lbs.
8076163-77 (Blue); Standard Tank, 15-24 lbs.; XL Tall Tank, 12-20 lbs.
Provide additional support for custom panels. Sold individually.
Replacement Dishwasher Baskets
8801236-36
Upper basket for all models; has a
split cup rack and a stemware rack.
7
8078644-36
Lower basket for all models;
has adjustable tines.
8801239-77
Cutlery basket for all models.
OPTIONAL DISHWASHER ACCESSORIES
European Toe Kick (Two Pieces)
Extension
8070121-0 Extension
8057528-0 Toe Kick
White European toe kick to accommodate 6" toe space on
model D3251FI. Two pieces are 23-1/2" wide.
8070121-86 Extension
8057528-29 Toe Kick
Black toe kick for same installation. Two pieces are 23-1/2" wide.
European Toe Kick
2.5" Toe Kicks
For special installations (D3112, D3251FI).
805SC-W White
805SC-B Black
805SC-M Titanium
2.5" Toe Kick
EASYINSTALL™ DISHWASHERS
ASKO’s dishwashers come with all the connections you need. We’ve eliminated the
need to get into the electrical and mechanical area, which makes installation simple
and quick. If a dishwasher is being installed in an area for the first time, most of the
cabinetwork, plumbing, and electrical has to be done before you move the machine into
place. If you are replacing an old dishwasher, you must check the plumbing connection
and wiring before you install the new dishwasher.
Pex hose with 3/8" brass fitting.
This system has these components which have been approved by regulatory
authorities (CULUS):
• Over 5' of Pex hose that replaces
the water-inlet copper tubing. It
has a 3/8"-compression fitting
that mates with a 3/8" shut-off
valve. Length: 5'2" from back of
unit.
Front-adjustable rear leg.
• Over 6' of drain hose with an
adaptable drain connection. The
high loop is built into this hose on
the back of the unit. Length: 6'6"
from back of unit.
• A 6' long electrical cord with
standard, 3-pronged, 120V plug.
This eliminates the need to wire
anything under the unit.
• Front-adjustable rear leg. You
can raise or lower the rear leg
from the front of the unit simply
by using a flat-head screwdriver
to rotate the adjusting screw.
Already wired with a standard
three-pronged plug.
Back of ASKO dishwasher
with EasyInstall system.
Drain hose with multiple size adaptor.
8
ULTRACARE ™ CLOTHES WASHERS
Key Selling Features Of Every ASKO Washer
★
★
★
★
★
★
♦ 20-year life expectancy
♦ Large, easy-access door opening
♦ Quick Wash program washes smaller or
lightly-soiled loads in only 35 minutes,
yet uses as little as 5.7 gallons of
water and 0.3kWh (2¢) of electricity
♦ Normal program washes full loads and
rinses three times in only 45 minutes
with only 9.3 gallons of water and
0.9kWh (6¢) of electricity.
♦ QuattroTM, four-shock suspension,
Automatic Load Balancing System,
cast-iron counterweights, and heavyduty bearings control load balancing
and provide virtually vibration-free spin
cycles for quiet operation – also prevent
walking and allow for stacking of units
♦ Solid rubber SmartSealTM door gasket
eliminates troublesome bellows gasket
seal that can leak and collect detergent
and soil residue
♦ Uses less electricity than most other
washers (according to DOE and FTC
test procedures)
♦ Multiple, adjustable programs
• Additional plug or wiring is unnecessary
because ASKO dryer has 220V receptacle for ASKO washer. This eliminates
the need to purchase an expensive
dual-outlet splitter box or to have an
additional 220V line run for the washer.
• Capacity as large as any top-loader:
up to 14 bath towels
• Smaller exterior size and quiet
operation allow for installation in more
convenient locations, e.g., in closets or
under counters in bathrooms, utility
rooms, and kitchens
• Tumble action, precise temperature
controls, optimal wash time, less
detergent and elimination of bleach
produce significantly cleaner, freshersmelling laundry and extend the life
and beauty of clothing
( ♦ Exclusive Features)
• High-lift ribs raise laundry to optimal
height before dropping into water,
increasing wash action effectiveness.
Ribs also shower laundry with water
to enhance cleaning action
• Sensor Level Control System
automatically determines the correct
amount of water for every load
• Can save 15,000 gallons of water
annually. Quick Wash uses 5.7 gallons
per load on average; Normal Wash
uses 9.3. Typical old-style agitators
use an average of 44 and domestic
front loaders use 28.
• An ASKO washer can save over $200
annually in water, electricity, detergent,
and bleach costs.
• Stainless steel, electro-polished
interior drum is snag-free, more gentle
to clothes, and more durable than
porcelain or plastic
• Built-in water heater provides optimal
temperatures (Cold, 85° – 205° F) for
better cleaning and energy savings by
eliminating need to use home’s lessefficient water heater
• Cold-water fill helps remove protein
stains, such as blood, as well as wine
and grape juice
• High spin speeds (up to 1,600 rpm)
remove up to 94% of water that can
be extracted by centrifugal force
(spinning) – reducing time and energy
consumed by dryer and extending life
and beauty of clothing
• Up to seven rinses remove virtually
every trace of detergent and soil
• Both units can run off a single,
standard 30 amp circuit
• Child-proof controls and electronic
door latch
• Easy-to-reach, out-front controls
• Anti-jam, auto-reversing drain pump
reduces service calls
W6461 Washer
2005
W660 Washer & T760 Dryer
2001
W6661 Washer & T761 Dryer
2002
Warranty:
3 YEARS: All parts and labor
5 YEARS: Parts for electronic controls, timers, motors & pumps
LIFETIME: Stainless steel drum
(See Warranty Certificate for complete details.)
9
• Rust- and chip-proof stainless steel
inner and outer tanks
• Automatic detergent and fabric
softener dispenser
• Removable, washable detergent
compartment
• Stackable when paired with ASKO
dryer (kit included with dryer)
• Every unit 100% factory tested
• CULUS approved
ASKO dishwashers and washers
meet the Energy Star® requirements.
W6222
COLORS
White
Titanium
SKUs
W6222
W6222T
SHIPPING WT
161 lbs
161 lbs
Key Features ( ♦ Unique Features)
♦ Newest Easy Control™ system with Smooth dial, 3 option buttons and LED display
window
♦ 10 programs are printed around the Smooth dial on the control panel
♦ Three option features (buttons): 6 temperatures (cold - 205°F), 3 spin speeds
(0/800/1200), super-rinse (+2 rinse to any cycle)
• Program memory remembers last program & options selected and automatically
repeats program unless changed.
• Sensisave™ ensures the lowest water & energy use (“A” rated)
• Quattro™ suspension with SmartSeal™
• Drop-down outer Convenience Door
• LED display shows remaining cycle time
• 6-way Aqua Block System for water security
W6461
COLORS
White
Titanium
Titanium Stainless
Stainless Steel
SKUs
W6461
W6461T
W6461TS
W6461SS
SHIPPING WT
174 lbs
174 lbs
174 lbs
184 lbs
Key Features ( ♦ Unique Features)
♦ EasyControl™ system with program dial, option buttons and LED window
♦ 11 programs are printed around knob on control panel.
♦ Six option features (buttons) are denoted on detergent drawer: temperature, spin
speed, delay start, Super rinse, high water and anti-crease.
♦ LED window shows temperature, estimated remaining time, spin speeds, and
available options.
• New Anti-Crease program (first ever in a washer) greatly reduces wrinkles before
clothing goes in the dryer. After the last spin, the tank rotates for three seconds
every minute for up to two hours or until the door is opened.
• Remembers last program used and automatically repeats program unless changed.
• Time delay start (1-24 hours)
• Seven wash temperature options (85° F to 205° F)
• 400-1600 rpm spin speeds, adjustable
• SensiSave water & energy saving system
• Program interrupt, add-an-item feature
10
WCAM1812 combination washer/dryer
COLORS
SKUs
White
WCAM1812
SHIPPING WT
195 lbs
Key Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Independent controls provide wash-only, dry-only or combo wash/dry options
Large capacity
Three spin speeds: 550, 800 and 1200 rpm
Easy controls – fully electronic
Stainless steel inner and outer tank
Internal water heater with temperature boost to 140º F
Four shock absorber suspension
Three rinses plus extra rinse option
Seamless transition from washing to drying
Condensation drying – no external venting required
110/115 volts, 15 amp
Cycle progression indicator light
ADA height compliant
CULUS approved
LAUNDRY ACCESSORIES
Steel Laundry Platform
8052000-1 White
8052000-3 Titanium
Platform increases the height of a single unit by 12-3/8"–14-7/8".
Has four adjustable feet.
12-3/8"–14-7/8"
315 mm–378 mm
Dimensions
HEIGHT
WIDTH
DEPTH
US
12-3/8"–14-7/8"
23-7/16"
21-1/4"
METRIC
315–378 mm
595 mm
540 mm
ecoVantage Laundry Detergent
1800902
Superior Formula and Performance
• The only laundry detergent that has an
oxygenated cleaning agent in a perfumeand dye-free (sensitive) formula
• Environmentally friendly
• Front-loader compatible
• HE (High Efficiency)
11
•
•
•
•
•
Money-back guarantee
Easy to handle, easy to store
Seven-pound plastic pail with handle
Will do approximately 120 loads
Kosher approved
23-7/16"
595 mm
21-1/4"
540 mm
ULTRACARE ™ CLOTHES DRYERS
(All units are electric)
Key Selling Features Of Every ASKO Dryer ( ♦ Exclusive Features)
DC7171 Drying Cabinet
W660 Washer & T760 Dryer
★
★
★
★
★
★
W6661 Washer & T761 Dryer
2002
♦ 20-year life expectancy
♦ Butterfly Drying™ System’s offset paddles help move clothing from front-to-back
and back-to-front in drum to prevent wrinkles. One-direction rotation also extends
motor life
♦ Cleanable air-flow fan
♦ Adjustable cool down for every heated cycle
• Additional plug or wiring is unnecessary because ASKO dryer has 220V receptacle
for ASKO washer. This eliminates the need to purchase an expensive dual-outlet
splitter box or to have an additional 220V line run for the washer. (Dryer power cord
not supplied.)
• Stainless steel, electro-polished interior drum is snag-free, more gentle to clothes,
and more durable than porcelain or plastic
• Anti-crease program reduces wrinkles
• Large capacity drum also reduces wrinkles
• Can be stacked when paired with ASKO washer – stacking kit included
• Up to 90 minute, time-controlled drying program
• Air, low and normal temperature programs
• End-of-program buzzer
• Air (fluff) drying program
• Three-way venting increases installation options
• Easy-to-reach, out-front controls
• Easy-access, double lint filter
• Flush, swing-out door can be hinged on left or right
• Only needs one 220V, 30 amp outlet (like any standard US dryer)
• Every unit 100% factory tested
• CULUS approved
Laundry Warranty:
3 YEARS: All parts and labor
5 YEARS: Parts for electronic controls, timers, motors and pumps
LIFETIME: Stainless steel drum
(See Warranty Certificate for complete details.)
Do not pair with a top-loading washer; those washers spin too slowly to remove enough
moisture to allow for efficient drying.
12
T712 (Vented) / T712C (Ventless)
VENTED
Vents to 60 feet!
VENTLESS
COLORS
White
Titanium
White
Titanium
SKUs
T712
T712T
T712C
T712CT
SHIPPING WT
86 lbs
86 lbs
104 lbs
104 lbs
Key Features ( ♦ Unique Features)
♦ Newest Easy Control™ system with Smooth dial, 3 option buttons and LED window
♦ SensiDry™ drying system – new drying sensors provide the gentlest and most
accurate drying technology available
♦ Six programs are printed around dial on control panel – 4 automatic programs,
2 timed programs
♦ Three option features (buttons): Temperature (low-normal), Anti-Crease (120
minutes), Delay Start (5 hours), End-of-Program buzzer
♦ Program memory remembers last program & options selected and automatically
repeats program unless changed
• T712 vents 3 ways
• T712 exhausts to 60 feet (see page 23)
♦ Four-way Aqua-Block Water Containment System (T12C)
• Internal moisture condenser system eliminates need for exterior wall venting (T12C)
T731 (Vented) / T741 (Ventless)
VENTED
Vents to 60 feet!
VENTLESS
COLORS
White
Titanium
Titanium
Stainless
Stainless
Steel
White
SKUs
T731W
T731T
T731TS
T731SS
T741W
SHIPPING WT
86 lbs
86 lbs
86 lbs
96 lbs
104 lbs
Key Features ( ♦ Unique Features)
♦ EasyControl™ system with program dial, option buttons and LED window
♦ Six programs are printed around knob on control panel
♦ Six option features (buttons) are identified on sticker inside door: timed drying
(5-90 mnts.), Anti-Crease, Delay Start (1-24 hours), temperature (low-normal),
end-of-program buzzer, and cool-down cycle
♦ LED window shows: SensiDry™ program selected, time when a timed-drying
program selected, number of minutes when Air Fluff selected, “End” when program
is completed, and “C” when in cool-down cycle
• T731 vents 3 ways
• T731 exhausts to 60 feet (see page 23)
♦ Four-way Aqua-Block Water Containment System (T741)
• Internal moisture condenser system eliminates need for exterior wall venting (T741)
• Remembers last program used and automatically repeats program unless changed
13
Drying Cabinet
COLORS
White
Titanium
SKUs
DC7171
DC7171T
SHIPPING WT
133 lbs
133 lbs
Key Features ( ♦ Unique Features)
♦ Timed Dry Cycle: Up to 4 hours
♦ Three temperature options: Normal, Low, Air Fluff
♦ Folding, pull-out hangers give you the equivalent of more than 50 feet of clothes line
♦ Accessories included: bar for hangers, glove hanger, hanger rod on door
♦ Optional stainless steel shoe rack available
♦ Very Quiet - 60 dB(A)
♦ Very energy efficient
• CULUS approved
The ASKO Drying Cabinet, DC7171, is designed to dry those items
that are not made to dry in a conventional tumble dryer, things
that you hang dry or lay flat to dry. The Drying Cabinet can also
dry those wet and damp clothes, shoes, boots, gloves and hats
that get wet even though they weren’t washed. They are very
quiet, very efficient, and match our washers and dryers perfectly.
LAUNDRY ACCESSORIES
White Space Trim Kit
Slide-Out Shelf
Shoe Rack
8063981-0
Installs between stacked pair to provide
a single unit appearance.
8061907-0 White
8061907-81 Titanium
Installs between stacked pair.
Extends 15" from units. Adds 2" to the
height of stacked laundry units.
67000621
Stainless steel shoe rack for drying
cabinet floor.
14
ADA TANK MODELS
Planning & Design: Dishwashers
D3112, D3251FI
Unit Dimensions
Technical Data
HEIGHT
WIDTH: D3112
D3251FI
DEPTH: D3112
D3251FI
DEPTH W/DOOR OPEN
WEIGHT: D3112
D3251FI
US
32-1/4" to 35-1/2"
24"
23-5/8"
24"
22-7/8"
47-1/8"
96 lbs
101 lbs
(D3112) 24"; 610 mm
METRIC
819 to 902 mm
610 mm
600 mm
610 mm
581 mm
1197 mm
44 kg
46 kg
Electricity
Water pressure
Heating element
Max loading
47-1/8"
1197 mm
(D3112) 24"; 610 mm
(D3251) 23-5/8"; 600 mm
120V, 60Hz, 15 amp
18-176 psi
1200 watt
1300 watt
6-1/4" - 8-1/4"
159 - 210 mm
32-1/4 to 35-1/2"
819 to 902 mm
(D3251) 22-7/8"; 581 mm
Door
2-1/4"
57 mm
6-1/4"
159 mm
2"
50 mm
Cutout Dimensions
2"
50 mm
*This depth allows a 1" (25 mm) space for the high-loop drain
hose.
NOTE: Maintain a 1/8" (3 mm) minimum clearance between unit
and cabinet.
6-1/4" to 8-1/4"
159 to 210 mm
The electrical and water supplies should enter through the area
indicated by the shaded area. Preferably, they should come
through the right side of the machine. The access hole must be
round and smooth and no bigger than 2" in diameter.
15
32-1/4 to 35-1/2" minimum
819 to 902 mm
METRIC
819 to 902 mm
610 mm
603 to 610 mm
600 mm
Specifications are subject to change without notice. See installation instructions for additional details.
2
60 3-5
0 /8"
m
m
HEIGHT
WIDTH: D3112
D3251FI
DEPTH
US
32-1/4" to 35-1/2"
24"
23-3/4" to 24"
23-5/8"
23-3/4" to 24"
603 to 610 mm
4"
TALL TANK MODELS
Planning & Design: Dishwashers
D3122XL, D3432XL, D3232XL, D3251XLHD, D3531XLHD, D3731XLHD
Technical Data
Unit Dimensions
HEIGHT
WIDTH
DEPTH
DEPTH W/HANDLE (HD)
DEPTH W/DOOR OPEN
WEIGHT: D3122XL
D3432XL
D3232XL
D3251XLHD
D3531XLHD/D3731XLHD
US
34-3/8" to 36-1/2"
24"
24"
25-5/8"
48-1/4"
104 lbs
107 lbs
113 lbs
116 lbs
125 lbs
(HD models)
24"
610 mm
120V, 60Hz, 15 amp
18-176 psi
1200 watt
1300 watt
48-1/4"
1226 mm
25-5/8"
651 mm
6-1/4" - 8-1/4"
159 - 210 mm
34-3/8" to 36-1/2"
874 to 927 mm
24"
610 mm
Electricity
Water pressure
Heating element
Max loading
METRIC
874 to 927 mm
610 mm
610 mm
651 mm
1226 mm
47 kg
48 kg
51 kg
53 kg
57 kg
Door
6-1/4"
159 mm
2"
50 mm
2-1/4"
57 mm
Cutout Dimensions
METRIC
876 to 927 mm
610 mm
600 mm
*This depth allows a 1" (25 mm) space for the high-loop drain
hose.
NOTE: Maintain a 1/8" (3 mm) minimum clearance between unit
and cabinet.
34-1/2" to 36-1/2" minimum
876 to 927 mm
US
34-1/2" to 36-1/2"
24"
23-5/8"
2"
50 mm
6-1/4" to 8-1/4"
159 to 210 mm
The electrical and water supplies should enter through the area
indicated by the shaded area. Preferably, they should come
through the right side of the machine. The access hole must be
round and smooth and no bigger than 2" in diameter.
2
60 3-5
0 /8"
m
m
HEIGHT
WIDTH
DEPTH
4"
24"
610 mm
Specifications are subject to change without notice. See installation instructions for additional details.
16
TALL TANK MODELS
Planning & Design: Dishwashers
D3232XLFI, D3251XLFI, D3531XLFI, D3731XLFI
Technical Data
Unit Dimensions
HEIGHT*
WIDTH
DEPTH
DEPTH W/DOOR OPEN
WEIGHT: D3232XLFI
D3251XLFI
D3531XLFI/D3731XLFI
US
33-3/4" to 35-3/4"
23-5/8"
22-7/8"**
48-1/4"
108 lbs
111 lbs
117 lbs
Electricity
Water pressure
Heating element
Max loading
METRIC
857 to 908 mm
600 mm
581 mm
1226 mm
49 kg
50 kg
53 kg
120V, 60Hz, 15 amp
18-176 psi
1200 watt
1300 watt
48-1/4"
1226 mm
23-5/8"
600 mm
6-1/4" - 8-1/4"
159 - 210 mm
33-3/4" to 35-3/4"
857 to 908 mm
22-7/8"
581 mm
Door
6-1/4"
159 mm
2"
50 mm
2-1/4"
57 mm
**Does not include the depth of a custom or optional door. If an ASKO optional door is used, add 2-1/2" (63.5 mm) to the depth.
Custom Front Panels
33-3/4" to 35-3/4" minimum
857 to 908 mm
The D3232XLFI, D3251XLFI, D3531XLFI and D3731XLFI can
only be installed with a fully-integrated custom door panel that
extends from the toe kick to the counter top. A one-piece custom
door panel with a curved handle is available (see page 7).
Refer to page 19 for instructions on how to install the custom panels.
Cutout Dimensions
US
33-3/4" to 35-3/4"
23-3/4" to 24"
23-5/8"
METRIC
857 to 908 mm
603 to 610 mm
600 mm
6-1/4" to 8-1/4"
159 to 210 mm
2
60 3-5
0 /8"
m
m
HEIGHT*
WIDTH
DEPTH
2"
50 mm
NOTE: Maintain a 1/8" (3 mm) minimum clearance between unit
and cabinet.
The electrical and water supplies should enter through the area
indicated by the shaded area. Preferably, they should come
through the right side of the machine. The access hole must be
round and smooth and no bigger than 2" in diameter.
17
23-3/4" to 24"
603 to 610 mm
*If an accessory fill strip is used, then 3/8" (9.5 mm) must be added to
dishwasher height and cutout height.
Specifications are subject to change without notice. See installation instructions for additional details.
4"
Planning & Design: Dishwashers
FITTING THE D3232XLFI, D3251XLFI, D3531XLFI AND D3731XLFI
ASKO-MADE OR CUSTOM DOOR PANEL – 4-INCH TOE KICK
The D3232XLFI, D3251XLFI, D3531XLFI and D3731XLFI can be installed with a fullyintegrated, buyer-supplied custom door panel or ASKO accessory panel (see page 7) that
extends from the toe kick to the counter top. The unit comes with everything needed to
make installing the door panel easy. The door is predrilled for the panel’s mounting screws.
The custom panel should be a minimum of 3/4" (19 mm) thick.
Items Provided With The Unit
• Two 3/8" screws
• Four 1-3/4" screws
CUSTOM PANEL DIMENSIONS
WIDTH
HEIGHT
23-1/2" (597 mm)*
30-1/8" (765 mm)
(Measured from the top of
the panel to the lower edge
of the kitchen cabinet.)
THICKNESS 3/4" (19 mm)
WEIGHT
Up to 15 lbs
Up to 20 lbs with accessory
spring
Installing The Custom Panel or ASKO Accessory Panel
– 4-Inch Toe Kick
Before fitting the door panel, the dishwasher must be installed
underneath the cabinet. After you’ve made the required measurements,
pull the machine out again to install the panel.
D
10266 7/8"
mm
15-7/16"
392 mm
1. Fit the handle (A) onto the panel according to the manufacturer’s
instructions. (NOTE: A handle should be used rather than a knob,
because a knob does not provide enough grip.)
30-1/8"
765 mm
Refer to the illustration at right for instruction references.
10266 7/8"
mm
D
IMPORTANT! The custom panel must not obstruct the
fan exhaust vent; otherwise, moisture from the vent
could eventually damage the cabinet and create
drying problems.
2. The two short screws (B) go into the back of the panel, 15-7/16"
(392 mm) from the upper edge of the panel and 10-7/8" (266 mm)
from the center of the panel. Insert the short screws into the panel, leaving
1/8" (3 mm) of space between the screw head and the panel.
*
3. Hook the panel screws (D) into the keyholes (C) on the dishwasher door.
4. Slide the panel to the left until it is centered in the opening, and secure the screws.
5. Open the door and use the four screws (D) supplied to secure the panel to the door.
NOTE: If the door panel weighs more than 15 pounds, you may need to order the
heavy-duty door springs. (See page 7.)
*Max panel width cannot exceed cutout dimensions less 1/8" (2.5 mm) reveal on each side.
Specifications are subject to change without notice. See installation instructions for additional details.
Adjusting The Door Springs
Before you push the dishwasher into the
cabinet opening, test the door to make
sure it stays in place at any angle. If it
tends to fall down, pull out the machine
and adjust the tension of the
door springs on the sides of
the machine by moving
them one hole
farther back or by
twisting the spring
Shorten
to make it shorter.
18
Planning & Design: Dishwashers
FITTING THE D3251FI (ADA TANK) ASKO-MADE OR CUSTOM DOOR
PANEL – 6-INCH TOE KICK
The D3251FI can be installed with a fully-integrated, buyer-supplied custom door panel
or ASKO ADA accessory panel (see page 7) that extends from the toe kick to the counter
top. The unit comes with everything needed to make installing the door panel easy. The
door is predrilled for the panel’s mounting screws.
The custom panel should be a minimum of 3/4" (19 mm) thick.
Items Provided With The Unit
• Two 3/8" screws
• Four 1-3/4" screws
CUSTOM PANEL DIMENSIONS
WIDTH
HEIGHT
23-1/2" (597 mm)*
28-1/8" (714 mm)
(Measured from the top of
the panel to the lower edge
of the kitchen cabinet.)
THICKNESS 3/4" (19 mm)
WEIGHT
Up to 18 lbs
Up to 24 lbs with accessory
spring
Installing The Custom Panel – 6-Inch Toe Kick
Before fitting the custom panel, the dishwasher must be installed
underneath the cabinet. After you’ve made the required measurements,
pull the machine out again to install the panel.
D
10266 7/8"
mm
IMPORTANT! The custom panel must not obstruct the
fan exhaust vent; otherwise, moisture from the vent
could eventually damage the cabinet and create
drying problems.
15-1/16"
382 mm
1. Fit the handle (A) onto the panel according to the manufacturer’s
instructions. (NOTE: A handle should be used rather than a knob,
because a knob does not provide enough grip.)
28-1/8"
714 mm
Refer to the illustration at right for instruction references.
10266 7/8"
mm
D
2. The two short screws (B) go into the back of the panel, 15-1/16"
(382 mm) from the upper edge of the panel and 10-7/8" (266 mm)
from the center of the panel. Insert the short screws into the panel,
leaving 1/8" (3 mm) of space between the screw head and the panel.
3. Hook the panel screws (D) into the keyholes (C) on the dishwasher door.
4. Slide the panel to the left until it is centered in the opening, and secure the screws.
5. Open the door and use the four screws (D) supplied to secure the panel to the door.
Adjusting The Door Springs
NOTE: If the door panel weighs more than 18 pounds, you may need to order the
heavy-duty door springs. (See page 7.)
*Max panel width cannot exceed cutout dimensions less 1/8" (2.5 mm) reveal on each side.
19
Specifications are subject to change without notice. See installation instructions for additional details.
Before you push the dishwasher into the
cabinet opening, test the door to make
sure it stays in place at any angle. If it
tends to fall down, pull out the machine
and adjust the tension of the
door springs on the sides of
the machine by moving
them one hole
farther back or by
twisting the spring
Shorten
to make it shorter.
Planning & Design: Dishwashers
D3232XLFI, D3251XLFI, D3531XLFI AND D3731XLFI DOOR PANEL
INSTALLATION OPTIONS
4-inch Toe Kick Installations
Panel extends from toe kick to cabinet top.
Custom panels that extend to cabinet top
30-1/8"
765 mm
The preferred installation option for a 4" toe kick is to extend the custom panel to the
cabinet top (as illustrated). A one-piece ASKO accessory panel with a curved handle is
available for 4-inch toe kick installations (see page 7).
23-1/2"*
597 mm
D3251FI DOOR PANEL
INSTALLATION OPTIONS
4-inch toe kick
Panel extends from toe kick to cabinet top.
Panel extends from toe kick to cabinet top.
6-inch Toe Kick Installations
For 6" toe kick installations, no decorative
fill strips or support strips are necessary.
ADA-Type Installations
6-inch toe kick
For cabinet openings of 32-1/4" (819 mm)
to 35-1/2" (902 mm).
2-1/2 to 6-inch toe kick
XLFI TRIM KIT INSTALLATION OPTIONS
ASKO XLFI dishwashers can be installed
either with or without accessory fill strips
depending on the type of installation. If
the dishwasher cutout has been cut to
European widths of 23-5/8", the units
won’t require fill strips. If the dishwasher
cutout is a standard 24" wide, we have
fill strips that make the unit 24" wide.
ASKO Accessory Panel Installation
Custom Wood Panel Installation
The ASKO accessory fill kit 8077317-95,
which includes the counter saver fill strip
and both side fill strips, should be installed
in the back mounting holes.
The ASKO accessory fill kit 8078982-95,
which includes the counter saver fill strip
and both side fill strips, should be installed
in the front mounting holes.
Specifications are subject to change without notice. See installation instructions for additional details.
20
Planning & Design: Washers
W6222, W6461
Unit Dimensions
HEIGHT
WIDTH
DEPTH
DEPTH W/DOOR OPEN
WEIGHT
Technical Data
US
33-1/2"–34-1/2"
23-7/16"
24-7/16" *
42-1/2"
167 lbs
METRIC
850–876 mm
595 mm
621 mm
1080 mm
73 kg
Supply voltage
Water Pressure
Heating element
Power cord
(attached)
*Includes 1" for control knob.
42-1/2"
1080 mm
36"
914 mm
Every ASKO washer is delivered ready-fitted with a plug and is intended for connection
to an ASKO dryer, which is equipped with a matching receptacle. If the washer is used
separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase
circuit.
Second-floor (above grade) installations must meet all local building codes.
When placing the washer next to a wall or cabinet, be sure to leave 1/2" (12 mm) of
space between the washer and the wall or cabinet.
See pages 26–27 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and under-cabinet installations.
21
Specifications are subject to change without notice. See installation instructions for additional details.
Single-phase
220 V, 60 Hz
15-146 psi
2000 W
220 V, 20 Amp
Planning & Design: Combination Washer/Dryer
WCAM1812
Unit Dimensions
HEIGHT
WIDTH
DEPTH
DEPTH W/DOOR OPEN
WEIGHT
Technical Data
US
33-1/4"–34"
23-1/2"
23-5/8"
39"
195 lbs
23-1/2"
597 mm
METRIC
845 mm to 864 mm
597 mm
600 mm
991 mm
88 kg
Water Pressure
Heating element
Power cord
(attached)
Single-phase
115 V, 60 Hz
15-142 psi
1400 W on dryer
1200 W on washer
115 V, 15 Amp
6-5/8"
168 mm
5-5/8"
143 mm
3-5/8"
92 mm
D
ho rai
se n
33-1/4"
845 mm
Po
co we
rd r
23-5/8"
600 mm
39"
991 mm
Supply voltage
4-1/2"
102 mm
Specifications are subject to change without notice. See installation instructions for additional details.
22
Planning & Design: Dryers
T712, T731 vented dryers
Unit Dimensions
HEIGHT
WIDTH
DEPTH
DEPTH W/DOOR OPEN
WEIGHT
Technical Data
US
33-1/2"–34-1/2"
23-7/16"
24-7/8" *
46-1/4"
86 lbs
METRIC
850–876 mm
595 mm
632 mm
1175 mm
39 kg
*Includes 1" for control knob.
Supply voltage
Heating element
Single-phase
220 V, 60 Hz
2500 W (3000 W for T731)
NOTE: When on a separate outlet, use
220 V, 20 Amp single-phase circuit. When
an ASKO washer is connected, use 220 V,
30 Amp single-phase circuit.
46-1/4"
1175 mm
24-7/8"
632 mm
The door hinges on ASKO dryers are
shipped left-hinged, but they are
reversible. See the Dryer Use and Care
Guide for more information.
Venting Requirements
When placing the dryer next to a wall or
cabinet, be sure to leave 1/2" (12 mm) of
space between the dryer and the wall or
cabinet.
Never cover the end of the dryer stub or
vent hose with anything to catch lint,
except for a UL-approved vent basket.
See page 26 for stacked washer/dryer
dimensions.
See pages 28–30 for cutout dimensions
for closet and under-cabinet installations.
NOTE: Power cord not supplied with unit.
23
WARNING! To reduce the risk of fire,
vented dryers must be exhausted
OUTDOORS or the equivalent.
The exhaust hose should be run with as
few bends as possible to the point of
discharge. If necessary, it can be extended
to a maximum of 60 feet (1829 cm) of 4 in
(10 cm) diameter ridged pipe. Make any
bends as gentle as possible. A maximum
of four 90° bends may be fitted in the
hose, otherwise the performance of the
dryer will be impeded. Subtract 4 feet of
exhaust hose for every 90° elbow.
Specifications are subject to change without notice. See installation instructions for additional details.
If the exhaust hose is taken to a wall outlet,
a ventilation grill should be fitted to prevent
reverse flow of cold air. Fit the ventilation
grill to the outside or inside of the wall.
This appliance should not be exhausted
into a chimney, a wall, a ceiling, or a
concealed space of a building. Only a
metal ventilation grill should be used.
Installation
Examples
Subtract 4 feet
(122 cm) for
every 90° elbow.
Planning & Design: Dryers
T712C, T741 condenser dryers (ventless)
Unit Dimensions
HEIGHT
WIDTH
DEPTH: T712C
T741
DEPTH W/DOOR OPEN
WEIGHT
Technical Data
US
33-1/2"–34-1/2"
23-7/16"
24-7/8" *
24-7/8" *
46-1/4"
103 lbs
METRIC
850–876 mm
595 mm
632 mm
632 mm
1175 mm
47 kg
Supply voltage
Heating element
Single-phase
220 V, 60 Hz
2500 W
NOTE: When on a separate outlet, use
220 V, 20 Amp single-phase circuit. When
an ASKO washer is connected, use 220 V,
30 Amp single-phase circuit.
*Includes 1" for control knob.
46-1/4"
1175 mm
24-7/8"
632 mm
The door hinges on ASKO dryers are shipped left-hinged, but they are reversible.
See the Dryer Use and Care Guide for more information.
NOTE: Power cord not supplied with unit.
When placing the dryer next to a wall or cabinet, be sure to leave 1/2" (12 mm) of
space between the dryer and the wall or cabinet.
NOTE: The drain hose must not be more
than 40" above the floor or the bottom of
the unit.
See page 27 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and under-cabinet installations.
2
Condensation Drain Requirements
3
You must install the dryer so the condensed water will continuously
flow into a drain or sink. To do this, follow the instructions below:
40"
(1016 mm)
maximum
height
1. Disconnect the short hose (1) from the blue connection.
(It’s okay to let the hose hang down.)
2. Connect the rubber hose supplied with the dryer to the blue nipple (2).
1
3. Run the hose to a drain or sink, as illustrated.
3
Back of dryer
Specifications are subject to change without notice. See installation instructions for additional details.
24
Planning & Design: Stacked Laundry Pairs
W6222/T712, W6461/T731 vented dryers
Dimensions
HEIGHT
WIDTH
DEPTH
WEIGHT
US
67"–69"
23-7/16"
24-7/8" *
253–258 lbs
Any ASKO dryer can be mounted on
top of any matching ASKO washer.
Stacking kits are provided with the dryer.
Refer to the ASKO Dryer Use and Care
Guide for stacking instructions.
METRIC
1702–1753 mm
595 mm
632 mm
115–117 kg
*Includes 1" for control knob.
46-1/4"
1175 mm
24-7/8"
632 mm
Every ASKO washer is delivered readyfitted with a plug and is intended for
connection to an ASKO dryer, which is
equipped with a matching receptacle.
When an ASKO washer is connected to
the dryer, use 220 V, 30 Amp singlephase circuit. When the dryer
is on a separate outlet, use
220 V, 20 Amp single-phase
circuit. If the washer is used
separately or with another
dryer, it must be on a
separate 220 V, 20 Amp
single-phase circuit.
When placing a stacked set
next to a wall or cabinet, be
sure to leave 1/2" (12 mm)
of space between the washer
and the wall or cabinet.
See page 24 for venting requirements.
See pages 29 for stacked cabinet or
closet dimensions.
WARNING! Never stack a washer on
top of a dryer!
WARNING! To reduce the risk of fire,
vented dryers must be exhausted
OUTDOORS or the equivalent.
Never cover the end of the dryer
stub or vent hose with anything
to catch lint, except for a ULapproved vent bucket.
36"
914 mm
42-1/2"
1080 mm
25
Specifications are subject to change without notice. See installation instructions for additional details.
Planning & Design: Stacked Laundry Pairs
W6222/T712C, W6461/T741 condenser dryers (ventless)
Dimensions
HEIGHT
WIDTH
DEPTH
WEIGHT
US
67"–69"
23-7/16"
24-7/8"*
270–275 lbs
Any ASKO dryer can be mounted on
top of any matching ASKO washer.
Stacking kits are provided with the dryer.
Refer to the ASKO Dryer Use and Care
Guide for stacking instructions.
METRIC
1702–1753 mm
595 mm
632 mm
122–125 kg
*Includes 1" for control knob.
46-1/4"
1175 mm
24-7/8"
632 mm
Every ASKO washer is delivered readyfitted with a plug and is intended for
connection to an ASKO dryer, which is
equipped with a matching receptacle.
When an ASKO washer is connected to
the dryer, use 220 V, 30 Amp singlephase circuit. When the dryer is on a
separate outlet, use 220 V, 20
Amp single-phase circuit. If
the washer is used
separately or with another
dryer, it must be on a
separate 220 V, 20 Amp
single-phase circuit.
When placing a stacked pair
next to a wall or cabinet, be
sure to leave 1/2" (12 mm) of
space between the washer
and the wall or cabinet.
ASKO condenser dryers must
be installed to continuously drain through a
hose attached to the rear of the machine.
To ensure proper drainage, the drain
must not be higher than 40" above the
bottom of the dryer.
See page 25 for condensation drain
requirements.
See page 29 for stacked cabinet or
closet installation dimensions.
WARNING! Never stack a washer
on top of a dryer!
36"
914 mm
42-1/2"
1080 mm
Specifications are subject to change without notice. See installation instructions for additional details.
26
Planning & Design: Drying Cabinet
DC7171
Dimensions
HEIGHT
WIDTH
DEPTH
WEIGHT
46-1/4"
1175 mm
US
67"–69"
23-7/16"
25-1/4"*
133 lbs
METRIC
1702–1753 mm
595 mm
640 mm
60 kg
23-7/16"
595 mm
3"
76 mm
25-1/4"
640 mm
4"
102 mm
4"
102 mm
10"
254 mm
*Includes 1" for control knob.
Supply voltage
Heating element
Motor
Single-phase 120 V, 60 Hz
1200 W
43 W
67" to 69"
1702 to 1753 mm
Technical Data
The drying cabinet must be connected to a 110-120 volt, single
phase, 60 Hz grounded wall outlet.
The unit comes with a 79" power cord attached, but the receptacle
should be installed in an easy to reach location that will allow the
plug to be removed without moving the drying closet.
When venting, the duct attaches to a 4" round exhaust collar that
is approximately 3" high.
21-1/2"
546 mm
23-15/16"
608 mm
Planning & Design: Laundry
DRYING CABINET WITH STACKED CABINET INSTALLATIONS
Cutout Dimensions
HEIGHT
WIDTH
DEPTH
US
68"–70"
49"minimum
25"
METRIC
1727–1778 mm
1244 mm
635 mm
The minimum clearance between the sides, back and top of the
unit and the cabinet should be at least 1/2" (12 mm).
120V Outlet
20"
508 mm
If the location of the drying cabinet installation won’t accommodate
the preferred venting requirements, the unit may be ducted into
the laundry room. Please note: This is not the preferred method
of installation.
Since the washing machine door is hinged on the right hand side,
the drying cabinet should be installed to the left of the stacked
laundry pair. Doing so will allow easier transfer of the wash load
between the washing machine and the drying closet avoiding the
open washing machine door.
27
Specifications are subject to change without notice. See installation instructions for additional details.
39-1/2" to 40-1/2"
1003 to 1029 mm
The drying cabinet exhaust collar should be connected to a 4"
diameter solid vent pipe with a maximum length of 3'3".
49" minimum
1244 mm
Planning & Design: Laundry
STACKED CABINET OR CLOSET INSTALLATIONS
ASKO’s front panel controls make it possible to install the washers and dryers under a
cabinet or in a closet. Make sure there is a 1/2" (12 mm) minimum clearance between
units and between units and cabinet or wall. To ensure proper ventilation, we
recommend louvered doors, particularly for condenser dryers.
Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to
an ASKO dryer, which is equipped with a matching receptacle. When an ASKO washer is
connected to the dryer, use 220 V, 30 Amp single-phase circuit. When the dryer is on a
separate outlet, use 220 V, 20 Amp single-phase circuit. If the washer is used separately
or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.
Cutout Dimensions
US
HEIGHT 68"–70"
WIDTH 24-1/2"minimum
DEPTH 25"
METRIC
1727–1778 mm
622 mm
635 mm
Vented Dryer Opening
Condenser Dryer Opening
T712 and T731 dryers can be vented from the rear or the left
or right side. The cabinet cutout illustrated below gives the
dimensions for a rear exhaust. See page 24 for venting
requirements.
ASKO condenser dryers must be installed to continuously drain
through a hose attached to the rear of the machine.
NOTE: To avoid crimping the electrical and water connections,
do not install the hookups between the area of 26" to 35" from
the floor (as indicated by shaded area in illustrations above).
For stacked installations, we recommend a 6-foot cord.
To ensure proper drainage, the drain must not be higher
than 40" above the bottom of the dryer. See page 25 for
condensation drain requirements.
WARNING! To reduce the risk of fire, vented dryers must be
exhausted OUTDOORS or the equivalent.
Never cover the end of the dryer stub or vent hose with anything
to catch lint, except for a UL-approved vent bucket.
Specifications are subject to change without notice. See installation instructions for additional details.
28
Planning & Design: Laundry
SINGLE UNIT CABINET INSTALLATIONS
ASKO’s front panel controls make it possible to install the washers and dryers under a
cabinet or in a closet. Make sure there is a 1/2" (12 mm) minimum clearance between
units and between units and cabinet or wall.
Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to
an ASKO dryer, which is equipped with a matching receptacle. When an ASKO washer is
connected to the dryer, use 220 V, 30 Amp single-phase circuit. When the dryer is on a
separate outlet, use 220 V, 20 Amp single-phase circuit. If the washer is used separately
or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.
Vented Dryers
ASKO vented dryers can be vented from the rear or the left or
right side. The cabinet cutout illustrated below gives the
dimensions for a rear or left exhaust.
Cutout Dimensions
US
HEIGHT 34"–35-1/2"
WIDTH 24-1/2"minimum
DEPTH 25"
NOTE: For these installations, a custom
countertop may be required.
Washer Opening
See page 24 for venting requirements.
WARNING! To reduce the risk of fire, vented dryers must be
exhausted OUTDOORS or the equivalent. See page 24 for venting
requirements.
Never cover the end of the dryer stub or vent hose with anything
to catch lint, except for a UL-approved vent bucket.
Condenser Dryers
ASKO condenser dryers must be installed to continuously drain
through a hose attached to the rear of the machine. To ensure
proper drainage, the drain must not be higher than 40"
above the bottom of the dryer.
See page 25 for condensation drain requirements.
Vented Dryer Opening
29
Condenser Dryer Opening
Specifications are subject to change without notice. See installation instructions for additional details.
METRIC
864–902 mm
622 mm
635 mm
Planning & Design: Laundry
SIDE-BY-SIDE UNDER-COUNTER INSTALLATIONS
ASKO’s front panel controls make it possible to install the washers and dryers under a
cabinet or in a closet. Make sure there is a 1/2" (12 mm) minimum clearance between
units and between units and cabinet or wall.
Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to
an ASKO dryer, which is equipped with a matching receptacle. When an ASKO washer is
connected to the dryer, use 220 V, 30 Amp single-phase circuit. When the dryer is on a
separate outlet, use 220 V, 20 Amp single-phase circuit. If the washer is used separately
or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.
ASKO’s front panel controls make it possible to
install the washers and dryers under a cabinet or
in a closet. Make sure there is a 1/2" (12 mm)
minimum clearance between units and between
units and cabinet or wall.
Cutout Dimensions
US
HEIGHT 34"–35-1/2"
WIDTH 48-1/2"minimum
DEPTH 25"
METRIC
864–902 mm
1232 mm
635 mm
NOTE: For these installations, a custom
countertop may be required.
Vented Dryer Opening
Every ASKO washer is delivered ready-fitted with
a plug and is intended for connection to an ASKO
dryer, which is equipped with a matching receptacle.
When an ASKO washer is connected to the dryer,
use 220 V, 30 Amp single-phase circuit. When the
dryer is on a separate outlet, use 220 V, 20 Amp
single-phase circuit. If the washer is used separately
or with another dryer, it must be on a separate
220 V, 20 Amp single-phase circuit.
NOTE: To avoid crimping the electrical and water
connections, do not install the hookups between
the area of 26" to 35" from the floor.
Washer and Vented Dryer
T712 and T731 dryers can be vented from the rear
or the left or right side. The cabinet cutout illustrated
at right gives the dimensions for a rear and left
exhaust. See page 24 for venting requirements.
Condenser Dryer Opening
WARNING! To reduce the risk of fire, vented dryers
must be exhausted OUTDOORS or the equivalent.
Never cover the end of the dryer stub or vent hose
with anything to catch lint, except for a UL-approved
vent bucket.
Washer and Condenser Dryer
ASKO condenser dryers must be installed to
continuously drain through a hose attached to the
rear of the machine. To ensure proper drainage,
the drain must not be higher than 40" above
the bottom of the dryer. See page 25 for
condensation drain requirements.
Specifications are subject to change without notice. See installation instructions for additional details.
30
B U I LT T O L A S T L O N G E R
www.askousa.com
© 2006 ASKO Inc. Form #0710231106
P.O. Box 851805, Richardson, Texas 75085-1805
ASKO Inc. retains the right to vary the model specifications at any time. All facts were accurate at time of printing. Before purchasing any ASKO product, read important energy cost and efficiency information available from retailer.
Download PDF

advertising