SELECTOR GUIDE »
ACCESSORIES SUPPLIED
3 ea. CA-558-2
12 ea CA-560-x
2 ea. CA-562-x
Three-Pin Interlock Connector Cables (2m)
Banana to Banana Jumper Cables (203mm)
Safety Banana to Banana Jumper Cables
(254mm)
6 ea. CA-563
BNC to Banana cables (241mm)
2 ea. CA-568-120 Earth Safety Ground Cables (305cm)
1 ea. 8010-317 Socket Insulating Plug Card
1 ea. 8010-CTB Customizable Test Board
2 ea. 8010-DTB Device Test Board for TO-247 Devices
(3kV, 100A)
For use with: 2651A, 2657A, 4200SCS, 26xxB, 2600-PCT-x, 4200-PCT-x
ACCESSORIES SUPPLIED
6517-ILC-3
6517B-ILC-3
7078-TRX-3
8007-GND-3
8607
Interlock Cable for 6517A
Interlock Cable for 6517B
Triax Cable
Safety Ground Wire
Source Cable Set
ENVIRONMENTAL LIMITS: Operating: –30° to +85°C, 65%
R.H. up to 35°C, derate 3% R.H./°C above 35°C. Stor­age: –25°
to +85°C.
DIMENSIONS: 108mm high × 165mm wide × 140mm deep (41⁄4
in × 6½ in × 5½ in).
WEIGHT: 1.45kg (3.19 lbs).
For use with: 6487, 6517A, 6517B
1.888.KEITHLEY (U.S. only)
www.keithley.com
A Greater Measure of Confidence
A Tektronix Company
ACCESSORIES
Model 8010 High Power Device Test Fixture:
The Model 8010 High Power Device Test Fixture
provides safe and easy connections for testing
packaged high power devices at up to 3000V
or 100A. The Model 8010 provides connections
for a high voltage SourceMeter SMU instrument (Model 2657A), one or two high current
SourceMeter SMU instruments (Model 2651A),
and three low power SourceMeter SMU instruments (other Series 2600B or Model 4200-SCS
source measure unit (SMU) instruments). This
allows devices with two terminals (diodes) or
three terminals (transistors) or even four or five
terminals to be characterized safely and accurately. The Model 8010 has full interlock capability for up to six SourceMeter SMU instruments.
The Model 8010 has integrated protection
circuits that protect the low voltage SourceMeter
SMU instruments from high voltages the Model
2657A can output should a device fault occur.
The Model 8010 includes both a high current
(100A) and a high voltage (3000V) test socket.
Various replacement test socket modules are
available, including TO-247, TO-220, axial lead,
and a blank socket module that allows building
a custom socket. In addition to standard banana
jumpers, the Model 8010 has rear-panel scope
and thermal probe ports to simplify system
integration.
Model 8009 Resistivity Chamber: The Model
8009 is a guarded test fixture for mea­sur­ing
volume and surface resistivities. It assures good
electrostatic shielding and high insulation resistance up to 1100V. The 8009 is designed for safe
operation with the 6517A or 6517B. Opening
the lid of the 8009 au­to­mat­i­cal­ly turns off the
6517A or 6517B voltage source. The 8009 ac­com­
mo­dates sheet samples from 64mm to 102mm
(2½ to 4 in) in diameter and up to 3.2mm (1⁄8
in) thick. It maintains good sample contact with
uniform pressure (from 6 to 10 lbs depending
on thickness) on smooth parallel sam­ples.
With the front panel switch on the 8009, toggle
between volume and surface re­sis­tiv­i­t y, with
the 6517A or 6517B configured to calculate and
display the appropriate result automatically. The
8009 permits direct measurement of volume
resistivity up to 1018W-cm (on samples 0.1cm
thick) and surface resistivity up to 1017W/square,
in accordance with ASTM pro­cedures.
Text fixtures
Text fixtures
Test Fixtures
Model 8011 Test Socket Kit: A three pin,
TO-247 test socket that is rated to 40V and 50A.
Includes cables for connecting to Model 2651A
High Power System SourceMeter® SMU instrument.
ACCESSORIES SUPPLIED:
8010-DTB
8010-CTB
CA-560-0
CA-560-2
CS-1629-8
CA-567-0
CA-567-2
2600-KIT
Model 8101-4TRX: 4-pin transistor fixture.
For use with: 4200-SCS, Series 2600B, 6482,
any 40V rated triaxial instrument
Device Test Board for TO-247 devices
Customizable Test Board
Banana to Banana Test Cables
Banana to Banana Test Cables
Two 8-pin Female Plug Connectors with screw
terminal connections (2 ea.)
Banana to Banana Test Cables (4 ea.)
Banana to Banana Test Cables (4 ea.)
8-pin Male Phoenix Connector Kit (2 ea.)
Model LR:8028: Component test fixture optimized for device testing up to 200V/1A. Includes
color-coded mini jumpers for easy device connections.
ACCESSORIES SUPPLIED:
40 ea. standard color-coded Teflon® mini jumpers, 20 red and
20 black
LR:8028 Instruction Manual
For use with: 4200-SCS, Series 2600B, 6482,
any 40V rated triaxial or SMA instrument
For use with: Model 2651A High Power
System SourceMeter
Model 8101-PIV: DC and pulse I-V demo fixture
that is a metal case with four female triax connectors, two SMA connectors, and a latch. Inside
the test fixture are two 4-pin device holders
(transistor sockets) and two plungers for parts
with two leads.
ACCESSORIES
For use with: 4200-SCS, Series 2600B, 6482,
any 40V rated triaxial or SMA instrument
1.888.KEITHLEY (U.S. only)
www.keithley.com
A Greater Measure of Confidence
A Tektronix Company
Text fixtures
Text fixtures
Test Fixtures
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement