A
B
C
Tip
Shield
D
1.
2.
ASSEMBLY INSTRUCTION
NP2X-AU-SILENT |
1/4” Professional Phone Plug
16
6 [0.24”]
4
Position to solder the shield.
A Slide the boot onto the cable.
B Prepare cable as shown.
C Solder the wire ends.
Attention:
Solder shield to marked position.
D Position the chuck onto the cable and align chuck with plugfinger.
Attention:
If using a cable with O.D. > 5.50 mm [0.216”] break away this part of the chuck.
E Slide the housing onto the plugfinger with the chuck.
F Finish the installation by tighten the bushing onto the connector.
break off
SILENT
E
SILENT
F
1.
2.
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
LI
CH
USA
UK
T:
T:
T:
T:
+423 / 237 24 24
+41 44 / 736 5010
+1 732 / 901 9488
+44 1983 / 811 441
F:
+423 / 232 53 93
F:
+41 44 / 736 5011
F:
F:
+1 732 / 901 9608
+44 1983 / 811 439
NEUTRIK Vertriebs GmbH
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK Hong Kong Ltd.
DE / NL / AT
FR
JP
HK
T:
+49 8131 / 280 890
T:
+33 1 / 4131 6750
T:
T:
+81 3 / 3663 4733
+852 / 2687 6055
F:
+49 8131 / 280 830
F:
+33 1 / 4131 0511
F:
F:
+81 3 / 3663 4796
+852 / 2687 6052
Draft. Nr.: BDA 218-0 / 3102M1641 I
Update: 06.03.2008
I
Data subject to change without prior notice. 2008NEUTRIK . ALL RIGHTS RESERVED.
www.neutrik.com
