KINO-ABT-i2 QIG V1.03_20160219
Mini-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board
SoC, VGA/HDMI/iDP, Dual Intel® PCIe GbE, USB 3.0, SATA,
HD Audio, iRIS-2400 and RoHS
KINO-ABT-i2
Quick Installation Guide
Version 1.0
Feb 19, 2016.
Package List
KINO-ABT-i2 package includes the following items:

1 x KINO-ABT-i2 single board computer

1 x Dual-port USB cable

1 x SATA cable

1 x IO shielding (P/N: 45014-0038C0-01-RS)

1 x QIG (Quick Installation Guide)

1 x Utility CD
©2006 Copyright by IEI Integration corp.
All rights reserved.
1
Specifications
 SoC:
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core,
2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB
cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB
cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB
cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core,
512KB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB
cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core,
2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core,
2MB cache, TDP=4.3W)
 BIOS: AMI UEFI BIOS
 Memory:
Two 204-pin 1066/1333 MHz dual-channel unbuffered DDR3L
SDRAM SO-DIMM support up to 8 GB (J1900, N2930, E3845,
E3827, E3826)
One 204-pin 1066/1333 MHz dual-channel unbuffered DDR3L
SDRAM SO-DIMM supports up to4 GB (N2807, E3825,
E3815)
 Graphics Engine:
Intel® HD Graphics Gen 7 Engines with 4 execution units,
supporting DX11.1, OpenGL 4.2 and OpenCL1.2
 Display Output:
Dual Independent Display
VGA (up to [email protected])
HDMI (up to [email protected])
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to
[email protected] Hz)
2
 Ethernet:
LAN1: Intel® I210-AT PCIe controller with NCSI support (for
iRIS solution)
LAN2: Intel® I211-AT PCIe controller
 Super IO: Fintek F81866D-I
 I/O Interface:
1 x PS/2 KB/MS
1 x microSD slot (E38XX SKU only)
2 x USB 3.0 (on rear I/O)
6 x USB 2.0 (2 on rear I/O, 4 by pin header)
1 x RS-422/485 (by pin header)
5 x RS-232 (2 on rear I/O, 3 by pin header)
2 x SATA 3Gb/s with 5V SATA power connector (no RAID)
 TPM: 1 x 20-pin header
 SMBus: 1 x 4-pin (1x4) wafer
 I2C: 1 x 4-pin (1x4) wafer
 Audio: Realtek ALC662 HD codec supports 5.1 channel
 Front Panel:
1 x Front Panel
(Power LED, HDD LED, Speaker, Power Button, Reset Button)
 LAN LED:
2 x 2-pin (1x2) header
 Expansion :
1 x Full-size PCIe Mini card slot (supports mSATA, co-lay
SATA port 2)
1 x PCIe x4 slot (PCIe x1 signal)
 iRIS Remote Management Module: 1 x iRIS-2400 slot
 Digital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
 Fan Connector:
1 x 4-pin smart fan connector
1 x 4-pin system fan connector
 Watchdog Timer:
3
Software programmable support 1~255 sec. system reset
 Power supply:
ATX power supply
 Power Consumption:
[email protected], [email protected], [email protected], [email protected]
(Intel® Celeron® J1900 CPU, 2 x 4GB 1333 MHz DDR3
memory)
 Operating Temperature: -20°C ~ 60°C
 Storage Temperature: -30°C ~ 70°C
 Operation Humidity: 5% ~ 95%, non-condensing
 Dimensions: 170mm x 170mm
 Weight(GW/ NW): 900g / 450g
Ordering Information

KINO-ABT-i2-J19001-R10:
Mini-ITX SBC supports Intel® Celeron® quad-core processor J1900
(10W), VGA/HDMI/iDP, dual Intel® PCIe GbE, SATA, USB 3.0, HD
Audio, iRIS-2400 and RoHS

KINO-ABT-i2-N29301-R10:
Mini-ITX SBC supports Intel® Celeron® quad-core processor N2930
(7.5W), VGA/HDMI/iDP, dual Intel® PCIe GbE, SATA, USB 3.0, HD
Audio, iRIS-2400 and RoHS

KINO-ABT-i2-N28071-R10:
Mini-ITX SBC supports Intel® Celeron® dual-core processor N2807
(4.3W), VGA/HDMI/iDP, dual Intel® PCIe GbE, SATA, USB 3.0, HD
Audio, iRIS-2400 and RoHS
4

KINO-ABT-i2-E38XX1-R10:
Mini-ITX SBC supports Intel® Atom™ processor E38XX,
VGA/HDMI/iDP, Dual Intel® PCIe GbE, SATA, USB 3.0, HD Audio,
iRIS-2400 and RoHS (by request MOQ: 100pcs/lot)

32205-003800-300-RS: RS-422/485 cable

32200-000049-RS: RS-232 cable, 200mm, DB-9 2x5P P=2.0

32006-000300-100-RS: PS/2 KB/MS Y-cable without bracket

32205-003800-300-RS: RS-422/485 cable, 200mm4

DP-LVDS-R10:
DisplayPort to 24-bit dual-channel LVDS converter board
(for IEI iDP connector)

DP-HDMI-R10:
DisplayPort to HDMI converter board (for IEI iDP connector)

DP-DVI-R10:
DisplayPort to DVI-D converter board (for IEI iDP connector)

DP-VGA-R10:
DisplayPort to VGA converter board (for IEI iDP connector)

DP-DP-R10:
DisplayPort to DisplayPort converter board (for IEI iDP connector)

TPM-IN01-R11:
20-pin Infineon TPM module, software management tool,
firmware V3.17
5
Jumpers setting and connectors
LABEL
J_CMOS1
J_ATX_AT1
USB SW1 Power
USB SW2 Power
MSATA_SW1
F_PANEL1
CRT1
HDMI1
DP1
LAN1_USB1
LAN2_USB2
KB_MS1
USB1
USB2
COM1-2
COM3
COM5-6
COM4
AUDIO_CV1
FRONT_PANEL1
SPDIF1
SATA1
SATA2
CN8
CPU_FAN1
SYS_FAN1
DIO1
ATX1
TPM1
SATA_PWR1,2
CN9
JSPI1
JSPI2
FUNCTION
Clear CMOS
AT/ATX Power Mode Setting
USB Power Setting
MSATA Selection
PWR & RST Buttons and indicators
VGA 15-pin Female Connector
HDMI Connector
DP Connector
RJ45 LAN and USB 3.0 Connector
RJ45 LAN and USB 2.0 Connector
6Pin-header Keyboard & Mouse Connector
Internal Pin-header 4 USB2.0 Connectors
External Serial Port DB-9 Connector
Internal Serial Port Connectors
Internal Serial Port RS422/RS485 Connector
HD Audio Connector
Front Panel Audio Connector
SPDIF Connector
SATA 3Gb/s Drive Connectors
Mini PCI-E Card Connector
CPU Fan Connector
System Fan Connectors
Digital I/O Connector
24Pin ATX Power Source Connector
TPM Connector
Serial ATA Power Connectors
EC Debug Port Connector
Flash SPI ROM
Flash EC ROM
6
CN5
LED_LAN1
LED_LAN2
SMBUS Connector
LAN1 LINK LED Connector
LAN2 LINK LED Connector
J_CMOS1: Clear CMOS button
PIN NO.
DESCRIPTION
Keep CMOS Setup
(Normal Operation)
Clear CMOS Setup
NC (default)
Press button
J_ATX_AT1: AT/ATX mode select switch
PIN NO.
Short 1 - 2
Short 2 - 3
DESCRIPTION
ATX Mode (default)
AT Mode
USB SW1, USB SW2: USB power setting
PCIE x16
DESCRIPTION
+5V DUAL
5V DUAL (default)
+5V
+5V
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status
Restore AC Power Loss
[Disabled(ATX)]
[Last State]
------------------
> PCI Express Configuration
> PCI Azalia Configuration
Power Saving Function(ERP)
[Disabled]
PCIEX16 Power
USB SW1
USB SW2
[1 x16 PCIE]
[+5V DUAL]
[+5V DUAL]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
7
MSATA_SW : MSATA setting
PIN NO.
Short 1 - 2
Short 2 - 3
DESCRIPTION
Auto detect M-SATA (default)
M-SATA Enable
F_PANEL1: PWR & RST Buttons and indicators
PIN
DESCRIPTION
PIN DESCRIPTION
1
2
+5V
BEEP_PWR
PWR
3
4
NC
IPMI ID_LED+
LED
5
6
GND
IPMI ID_LED7
8
PWRBTN_SW#
PC_BEEP
PWR
BTN
9
10
GND
NC
11
12
+5V
EXTRSTHDD
LED
13
14
SATA_LED#
GND
VIDEO1: 15-pin Female Connector
PIN NO.
DESCRIPTION
PIN NO.
1
3
5
7
9
11
13
15
RED
BLUE
GND
GND
VCC
NC
HSYNC
DDCCLK
2
4
6
8
10
12
14
SPKR
IPMI LED
SPKR
RESET
DESCRIPTION
GREEN
NC
GND
GND
GND
DDCDA
VSYNC
8
HDMI1 : HDMI Connector
PIN NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
HDMI_DATA2
GND
HDMI_DATA2#
HDMI_DATA1
GND
HDMI_DATA1#
HDMI_DATA0
GND
HDMI_DATA0#
HDMI_CLK
GND
HDMI_CLK#
DP1: Display port connector
PIN NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
HPD
AUXP
GND
AUXN
AUX_CTRL_DET_D
GND
GND
LANE2P
LANE3P
LANE2N
PIN NO.
DESCRIPTION
13
14
15
16
17
18
19
20
21
22
23
N/C
N/C
HDMI_SCL
HDMI_SDA
GND
+5V
HDMI_HPD
HDMI_GND
HDMI_GND
HDMI_GND
HDMI_GND
PIN NO.
DESCRIPTION
11
12
13
14
15
16
17
18
19
LANE3N
GND
GND
LANE0P
LANE1P
LANE0N
LANE1N
+3.3V
+5V
9
LAN1_USB1: RJ45 LAN and USB3.0 Connector
USB3.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
RJ45 LAN
PIN NO.
VCC
USB_DATAUSB_DATA+
GND
USB3_RXUSB3_RX+
GND
USB3_TXUSB3_TX+
10
11
12
13
14
15
16
17
18
VCC
USB_DATAUSB_ DATA+
GND
USB3_RXUSB3_ RX+
GND
USB3_TXUSB3_TX+
DESCRIPTION
PIN NO.
DESCRIPTION
20
21
22
23
LAN1_MDI0P
LAN1_MDI0N
LAN1_MDI1P
LAN1_MDI1N
24
25
26
27
LAN1_MDI2P
LAN1_MDI2N
LAN1_MDI3P
LAN1_MDI3N
LAN2_USB2: RJ45 LAN and USB2.0 Connector
USB2.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
2
3
4
RJ45 LAN
PIN NO.
VCC
USB_DATAUSB_DATA+
GND
5
6
7
8
VCC
USB_DATAUSB_DATA+
GND
DESCRIPTION
PIN NO.
DESCRIPTION
L1
L2
L3
L4
TRD2P0
TRD2N0
TRD2P1
TRD2P2
L5
L6
L7
L8
TRD2N2
TRD2N1
TRD2P3
TRD2N3
10
KB_MS1: Keyboard & mouse pin header
PIN NO.
DESCRIPTION
PIN NO.
1
VCC5_KBMS
2
3
MSCLK
4
5
KBCLK
6
DESCRIPTION
MSDATA
KBDATA
KBGND
USB1, USB2: Internal USB 2.0 connectors
PIN NO.
DESCRIPTION
PIN NO.
1
VCC
2
3
USB_DATA4
5
USB_DATA+
6
7
GND
8
DESCRIPTION
GND
USB_DATA+
USB_DATAVCC
COM1/2: External Serial Port Connector(COM1&2)
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
2
3
4
5
DCD1
RXD1
TXD1
DTR1
GND
6
7
8
9
DSR1
RTS1
CTS1
RI1
COM3, COM5, COM6: Internal Serial Port Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
2
3
4
5
DCD
DSR
RXD
RTS
TXD
6
7
8
9
10
CTS
DTR
RI
GND
GND
11
COM4: RS-422/485 serial port connector
PIN
DESCRIPTION
PIN
1
RXD485#
2
3
TXD485+
4
DESCRIPTION
RXD485+
TXD485#
AUDIO_CV1 : Audio Line-In/Out MIC Connector
PIN NO.
DESCRIPTION
Line_In (Blue)
CD/DVD or other audio source input port
Line_Out (Green)
Connect this port to headphone or speaker
Microphone (Pink)
Connect this port to microphone
FRONT-PANEL1: Audio Source Connector
PIN NO.
DESCRIPTION
PIN NO.
1
2
MIC2-L
3
MIC2-R
4
5
LINE2-R
6
7
8
FRONT-IO
9
10
LINE2-L
DESCRIPTION
GND
Presence#
MIC2-JD
NC
LINE2-JD
SPDIF1 : SPDIF Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
2
4
NC
GND
1
3
5
+5V
SPDIFOUT
SPDIFIN
12
SATA1, SATA2: SATA 3Gb/s Drive Connectors
PIN NO.
DESCRIPTION
PIN NO.
1
3
5
7
GND
TXRXGND
CPU_FAN1: CPU FAN connector
PIN NO.
DESCRIPTION
1
GND
3
FANIO
2
4
6
DESCRIPTION
TX+
GND
RX+
PIN NO.
2
4
DESCRIPTION
+12V
PWM
SYS_FAN1: System FAN connector
PIN NO.
DESCRIPTION
PIN NO.
1
FANIO
2
3
GND
DESCRIPTION
+12V (PWM)
DIO1: Digital Input / Output Connector
PIN NO.
DESCRIPTION
PIN NO.
1
3
5
7
9
GND
Output 3
Output 1
Input 3
Input 1
2
4
6
8
10
DESCRIPTION
VCC
Output 2
Output 0
Input 2
Input 0
13
CN8: Mini PCI-E Card Connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
PCIE_WAKE#
N/C
N/C
N/C
GND
MSATA_CLK#
MSATA _CLK
GND
PLTRST_N
N/C
GND
SATA_RX+
SATA_RXGND
GND
SATA_TXSATA_TX+
GND
GND
+3.3V
+3.3V
+3.3V
CLINK_CLK
CLINK_DATA
CLINK_RST#
MSATA_DET
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
+3.3V
GND
1.5V
N/C
N/C
N/C
N/C
N/C
GND
+3.3V
PLTRST_N
+3.3V
GND
1.5V
SMB_CLK
SMB_DATA
GND
USB_DATAUSB_DATA+
GND
N/C
N/C
N/C
1.5V
GND
+3.3V
14
ATX1: ATX Power Connector
PIN NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
+3.3V
+3.3V
GND
+5V
GND
+5V
GND
Power good
5VSB
+12V
+12V
+3.3V
TPM1: TPM connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
LCLK
LFRAME#
LRERST#
LAD3
+3.3V
LAD0
SCL
SB3V
GND
LPCPD#
PIN NO.
DESCRIPTION
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
-12V
GND
PS_ON
GND
GND
GND
-5V
+5V
+5V
+5V
GND
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
20
GND
KEY
+5V
LAD2
LAD1
GND
SDA
SERIRQ
GLKRUN#
LDRQ#
SATA_PWR1,2:Serial ATA Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5VS
2
GND
15
CN9: EC debug port
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
EC_EPP_STB#
EC_EPP_PD0
EC_EPP_PD1
EC_EPP_PD2
EC_EPP_PD3
EC_EPP_PD4
EC_EPP_PD5
EC_EPP_PD6
EC_EPP_PD7
JSPI1: Flash SPI ROM Connector
PIN NO.
DESCRIPTION
1
3
5
+1.8V
SPI_SO
SPI_SI
JSPI2: Flash EC ROM Connector
PIN NO.
DESCRIPTION
1
3
5
+1.8V
SPI_SO
SPI_SI
CN5: SMBUS Connector
PIN NO.
DESCRIPTION
1
GND
3
SMB_CLK
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
EC_EPP_AFD#
NC
EC_EPP_INIT#
EC_EPP_SLIN#
GND
NC
EC_EPP_BUSY
EC_EPP_KSI5
EC_EPP_KSI4
PIN NO.
DESCRIPTION
2
4
6
SPI_CS#
SPI_CLK
GND
PIN NO.
DESCRIPTION
2
4
6
SPI_CS#
SPI_CLK
GND
PIN NO.
2
4
DESCRIPTION
SMB_DATA
+V5S
LED_LAN1, LED_LAN2: LAN link LED connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
LAN1_LED_LNK#_ACT
16
Board Layout: Jumper and Connector Locations
** E3825、E3815、N2807 僅有 DIMM1 上件
(Unit: mm)
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement