TVLogic LVM-074W Operation Manual
TVLogic LVM-074W is a multi-format LCD monitor with a wide range of features that make it ideal for professional video production. It supports various SDI formats (SD/HD/3G) and analog signals (CVBS, S-Video, YPbPr), as well as HDMI with HDCP. The monitor also features an HDMI To HDMI Throughout and an HDMI To SDI conversion output, making it versatile for various applications.
PDF
Download
Document
Advertisement
Advertisement
Multi Format Broadcast LCD Monitor Operation Manual_v1.0 LVM-074W Contents 1. Caution 04 2. Main Features 06 3. Controls & Functions 07 4. Menu Tree & Adjustment 11 5. Menu Operations 12 [1] Picture 12 [2] Color 12 [3] Marker 13 [4] GPI/UMD 14 [5] Waveform 16 [6] Audio 18 [7] Display & Set 19 6. Button Functions 21 7. Other Functions 23 3URGXFW6SHFLÀFDWLRQV 31 9. Optional Accessories 32 FCC (Federal Communications Commission) This equipment has been tested and found to comply with the limits for class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential to correct the interference at his own expense CAUTION: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packing indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequence for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. Multi Format LCD Monitor 3 1. Caution t Always use set voltage. (DC 12V) tAll operating instructions must be read and understood before the product is operated. These safety and operating instructions must be kept in safe place for future reference. tAll warnings on the product and in the instructions must be observed closely. tAll operating instructions must be followed. tDo not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents. tThis product must be operated on a power source specified on the specification label. tIf you are not sure of the type of power supply used in your home, consult your dealer or local power company. For units designed to operate on batteries or another power source, refer to the operating instructions. tThe power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. tIn case of using other 12V DC adapters instead of the standard adapter provided by the manufacturer, please check the proper load capacity (or current capacity) and use an adapter with stable voltage. tDo not overload DC outlets or extension cords. Overloading can cause or electric shock. tNever insert an object into the product through vents or openings. High voltage in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product. tDo not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing. 4 Multi Format LCD Monitor t If any of the following conditions occurs, unplug the power cord from the DC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e. When the product has been dropped or damaged. f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. tIn case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. tUpon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 1. Caution tWhen mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. tSudden stops, excessive force and uneven floor surface can cause the product to fall from the cart. tUnplug the power cord from the DC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. tThe vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. tUnplug the power cord from the AC outlet if you do not use the product for considerably long time. tDo not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. tKeep the product away from direct rays of the Sun-light. tDo not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instruction. Use only the mounting hardware recommended by the manufacturer. tWhen relocating the product placed on a cart, it must be moved with the utmost care. tIn case of installation the product on the rack, the inside of the product would be overheated due to heat from other devices near by and the decrease of air circulation, which could damage to the monitor. To prevent the damage, please have enough space for the monitors and use fan to avoid heat and maintain the operating temperature. (Refer to the specication of the product). tThe LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. tKeep the product away from heat sources such as radiators, heaters, stoves and other heat generating products (including amplifiers). Multi Format LCD Monitor 5 2. Main Features VFM-074W Monitor contains the following features: tCompatible with various SDI signals formats (SD/HD/3G) - This product is compatible with various SDI signals - SD/HD/3G(A/B)-SDI 480i, 576i, 1080i, 1080p, 1080psf t Knob Control - Easy to adjust user configuration using the control knob on the front of the monitor. t BLUE ONLY/MONO/Focus Assist/H/V Delay Function tCompatible with various analog signals - This product is compatible with various analog signals such as CVBS(Composite), S-Video and YPbPr(Component). tHDMI(with HDCP) Signal - HDMI(w/ HDCP) input is available without any other accessory. tHDMI To HDMI Throughout - This product features an HDMI To HDMI Throughout. tHDMI To SDI Conversion Output - This product features an HDMI To SDI conversion output. tTemperature Adaptive Color - This product provides a self-adjustment function for white balance(or color temperature) utilizing internal sensor that measures the temperature of the LCD panel tAll-in-one type system - Slim and all-in-one type monitor that supports various video formats. t Range Error/Luma(Y’) Zone Check (Color/ Zebra Type) Function t Internal Pattern Generator (0~100% Gray/ ColorBar+Pluge) t Markers & Safety Areas - Center Marker, Safety Area Marker, Aspect Marker, Display Size(Scan) t Pixel To Pixel/Zoom mode - Used to display the original image resolution without scaling to match a certain resolution or an aspect ratio. - Select ‘Pixel to pixel’ to display unscaled images, and select ‘Zoom’ to enlarge the original image. - Zoom Scroll Function (Left/Right,Top/Bottom) t Power - Basically, the product is powered by normal DC source. - The product can be battery-powered. * DC 12V (Typical) t Additional features tWide Screen / Wide Viewing Angle tWaveForm/Vectorscope/Audio Level Meter Function - WaveForm & Vectorscope - 2 X Zoom - Embedded Audio Level Meter tAudio Out - Internal Speaker(actives only with input signals with Embedded Audio) - Stereo Audio Out through phone Jack. 6 Multi Format LCD Monitor - Camera Mounting Hole x 4, VESA Mounting Standard, External Tally Function, 400cd/m2 Brightness, 800 : 1 Contrast, OSD user interface 3. Controls & Functions LVM-074W : FRONT SDI-A HDMI SCAN SDI-B ANALOG ASPECT MARKER BLUE/MONO W-FORM/VECTOR F1 F2 F3 F4 H/V DLY. MAX BRIGHT MENU/EXIT +'0,,1 LVM-074W : REAR TVL-LVM-074W(A) +'0,287 RS 422 Multi Format LCD Monitor 7 3. Controls & Functions FRONT t[HDMI] Button/Lamp - Used to select HDMI input. t[SDI-A] Button/Lamp t[ASPECT] Button/Lamp - Used to change the display variout ratio. - Activates in order of [16:9]-[4:3]-[2.35:1]-[1.85:1] - [15:9]-[16:10]-[AUTO]-[16:9]. - Used to select SDI-A input. t[SDI-B] Button/Lamp - Used to select SDI-B input. t[ANALOG] Button/Lamp - Used to select desired Analog input. (CVB1/2/3, S-Video, Component, RGB) - Press the button to activate the analog input menu-selection, then use UP and DOWN button to select desired input. * See section “Other Functions [1]ANALOG Button” for more information. t [F1][F2][F3][F4] Button/Lamp - Used to activate the function. * See section “6.Button Functions -> [4] Function key set button” for more information. t [SCAN] Button/Lamp - Used to change the scan mode. - Press the button to activate through the scan modes: [UNDERSCAN] -> [OVERSCAN] -> [PIXEL TO PIXEL] -> [USER ASPECT] -> [UNDERSCAN] #PIXEL TO PIXEL mode is not available in graphic mode. #[USER ASPECT]: User can adjust width and height of the display. * See section “7. Other Functions -> [1] Pixel to Pixel and [2] User Aspect” for more information. t [MARKER] Button/Lamp - Used to activate/deactivate the Marker. The type of marker at work may be selected on the main menu. t[BLUE ONLY]/[MONO] Button/Lamp - Activates in the order of [OFF]-[Blue Only][Mono]-[OFF]. - Press the button to remove red and green from the input signal and display the screen only under a blue signal. Press the button again to activate mono mode. - They are not available in RGB, DVI ANALOG, DVI DIGITAL and HDMI modes. t[WAVEFORM]/[VECTOR SCOPE] Button/Lamp - Pressing the button activate features in the order of: [O]-[Waveform]-[Vector Scope][Waveform Wide]-[Waveform YCbCr]-[Wave & Vector]- [Vector_YCbCr]-[Full Waveform(Y)] -[Full Vectorscope]-[OFF]. - [Waveform YCbCr] : Displays each waveform for elements of the luminance and Cb/Cr of the input signal. - [Wave & Vector] : Displays waveform and vector scope simultaneously. - [Vector YCbCr] : Displays Vector scope and Y/ Cb/Cr waveform simultaneously. * See section “7. Other Functions [3]Waveform function and [4]Line Select” for more information. t[H/V DELAY] Button/Lamp - Used to check horizontal sync and vertical sync simultaneously by moving the display to the left, right, up and down. - In this mode, the brightness of image automatically increase for easy verification of synchronized signals. t[MAX BRIGHT] Button/Lamp - Used to activate the MAX BRIGHT. t[MENU/EXIT] Button/Lamp - Used to activate the OSD menu. - When the OSD menu is activated, press this button to exit from the menu. 8 Multi Format LCD Monitor 3. Controls & Functions FRONT t[OPERATE] Lamp - Indicates condition and power status of unit. - Light turns off when the power is disconnected. - Standby mode is indicated by a red LED light. - Normal (active) mode is indicated by a Green LED light. - Restores to previous state when monitor power turns off and comes back on. t[POWER] Button - Used to turn power on and off. tAUDIO OUT (Phone Jack) - Used for Stereo Audio Output through Phone Jack. (video signals with embedded audio only) tPGM (Mini USB) - This terminal is used to upgrade the firmware or color calibration made by TVLogic. t[TALLY] Lamp - Tally lamp that can be toggled in green or red using the REMOTE(RJ-45) port. t[BRIGHT] Knob - Used to adjust the degree of brightness. - The value is selectable between -100 ~ 100. t[CONTRAST] Knob - Used to adjust the contrast. - The value is selectable between -100 ~ 100. t[VOLUME/F5] Knob - Used to adjust the volume for internal speaker and external output. - The value is selectable between 0 ~ 30. - [F5] : Press F5 Knob for 2 second to set the function. Available functions are [VOLUME][CHROMA]-[APERTURE]-[PHASE]-[FOCUS LEVEL]. t[UP/DOWN/ENTER] Knob - Used to move within the menu when OSD menu is activated, and is also used to decrease or increase the value of the selected feature. - Press the knob to select the main menu and sub menus. REAR tEXT.TALLY IN - This terminal uesd to External tally input. t[TALLY] Lamp - Tally lamp that can be toggled in green or red using the REMOTE(RJ-45) port. t[SDI-IN A] (BNC) - HD/SD SDI signal input terminal for SDI A. t[SDI-OUT A] (BNC) - HD/SD-SDI signal output terminal for SDI A signal. t[SDI-IN B] (BNC) - HD/SD SDI signal input terminal for SDI B. t[CVSBS1/Pr/R/S-C] (BNC) - Signal input terminal used to feed themonitor COMPOSITE 3, S-VIDEO C, COMPONENT Pr and RGB R signals. t[CVBS2/Y/G/S-Y] (BNC) - Signal input terminal used to feed the monitor COMPOSITE 1, S-VIDEO Y, COMPONENT Y and RGB G signals. t[CVSBS3/Pb/B] (BNC) - Signal input terminal used to feed the monitor COMPOSITE 2, RGB B and COMPONENT Pb signals. tAUDIO IN (phone jack) - Internal speakers stereo audio input terminal. t[HDMI] IN - Signal input terminal for HDMI signal. t[HDMI] OUT - Signal output terminal for HDMI signal. tLAN - Used for easy firmware updates. t[RS422 IN/OUT] (RJ-45) - Used to control the monitor with protocol provided by TVLogic or to support TSL protocol. Multi Format LCD Monitor 9 3. Controls & Functions REAR t[REMOTE] (RJ-45) - Provides connection to control equipment for external monitor control. - Features can be changed in the REMOTE(1/2) section of OSD menu. t BATTERY IN - Battery Power Input : DC 12V * Rated Power Input : DC 12V (1.5A) t DC POWER IN / TALLY (XLR 4P) - DC power input terminal for DC 12V. Connector 1 Composite Component CVBS1 Pr S-Video C 2 CVBS2 Y Y 3 CVBS3 Pb No Con. <Warning!!> When using the product make sure to ground before connecting the input signal line. The unit may not operate properly if the input line is connected before the GND is connected. 10 Multi Format LCD Monitor 4. Menu Tree & Adjustment [1] Menu Tree ವOSD(On-Screen Display) Menu helps you use various functions. ವThis Picture is the menu structure for LVM-074W [3] Menu Control Sequence Press MENU button to activate the OSD menu. 2. Move to a desired menu by scrolling the Knob. 3. Press the Knob to select a menu and move to select a sub-menu by scrolling the Knob. 4. Press the Knob to select the desired sub menu. (The selected sub-menu will be highlighted) 5. Press ENTER button or MENU button to save the new value after adjusting the value by scrolling the Knob. 6. Press MENU button to return to previous menu and if there is no previous menu, the OSD menu will be removed from the screen. [2] Menu Control ವUser may control various functions using MENU button on the back and the Knob on the side of the monitor. Multi Format LCD Monitor 11 5. Menu Operations [1] Picture t Brightness - Used to set the brightness(=offset) level from -100 to 100. # Press the Knob to adjust Brightness quickly. t Contrast - Used to set the contrast(gain) level from -100 to 100. # Press the Knob to adjust Contrast quickly. t Chroma - Used to set the saturation level from -50 to 50. # Press the Knob to adjust Chroma quickly. t Phase - Used to set the hue(phase) level from -40 to 40. (Activates only in analog signal input.) t Aperture - Used to set the sharpness level from -12 to 12. # Press the Knob to adjust Aperture quickly. t NTSC Setup - Used to set Black Level of NTSC video as 0(zero setup) or 7.5 IRE. - Activated when NTSC video signal is input through Composite 1/2/3 or S-VIDEO terminal. t Knob Lock - Locks the Knob control(APERTURE, BRIGHT, CHROMA, CONTRAST, VOLUME). 12 Multi Format LCD Monitor [2] Color t Color Temp. - Controls color temperature and allows instant access to preset color temperature settings. - Available color temperatures are 3200K, 5600K, 6500K, 9300K and User 1/2/3. - In User 1/2/3 modes, user can define custom RGB GAIN and BIAS (=Offset) values. t Gain Red/Green/Blue - Used to set R/G/B Gain(or Picture, Contrast) level from -256 to 255. # Only available in User 1/2/3 mode. t Bias Red/Green/Blue - Used to set R/G/B Bias(or Offset, mainly affects on Black level) from -100 to 100. # Only available in User 1/2/3 mode. t Color Copy - Used to copy the R/G/B Gain value of prestored color temperature settings. - In User mode, find and select the color temperature and press Enter button to copy and apply the Gain value to GAIN RED, GAIN GREEN, GAIN BLUE. # Only available in User 1/2/3 mode. t Temperature Adaptive Color - [On] : Used to measure and compensate the color temperature shift caused by panel temperature variation. - [Off] : Used to apply preset color temperature setting regardless of the panel temaperature. 5. Menu Operations [3] Marker t Marker t Marker Mat - Used to activate the Marker function. - Available marker types are OFF, 16:9, 4:3, 4:3 ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 & 4:3 and USER. - Used to set the darkeness level outside of the MARKER area from OFF(transparent) to 7(Black). - The bigger the value, the darker the color. t Marker Color t Center Marker - Displays the Center Marker on the screen. t Safety Area - Used to select to display and controls the size and availability of the Safety Area. - Available sizes are 80%, 85%, 88%, 90%, 93%, 100%, EBU ACTION 16:9, EBU GRAPHIC 16:9, EBU ACTION 14:9, EBU GRAPHIC 14:9, EBU ACTION 4:3 and EBU GRAPHIC 4:3. t Fit Marker - Used to activate or inactivate the Fit Marker function. - When the Marker type is selected in the Marker menu, a border line of the Safety Area will be displayed inside the Marker.Images below show the difference between Fit Marker ON and OFF. - Used to set the color of the MARKER lines. - Available colors are white, gray, black, red, green and blue. t Thickness - Used to set the thickness of the MARKER lines. - Thickness level is from 1 to 7 by the pixel unit. t USER Marker H1 - Used to set the position of the first horizontal marker line. - Displayed when MARKER menu is set to USER. t USER Marker H2 - Used to set the position of the second horizontal marker line. - Displayed when MARKER menu is set to USER. t USER Marker V1 - Used to set the position of the first vertical marker line. - Displayed when MARKER menu is set to USER. 0$5.(5 6$)(7<$5($ ),70$5.(52)) 0$5.(5 6$)(7<$5($ ),70$5.(521 t USER Marker V2 - Used to set the position of the second vertical marker line. - Displayed when MARKER menu is set to USER. Multi Format LCD Monitor 13 5. Menu Operations [4] GPI / UMD - The selectable values are as follows : Menu Classification PIN 1~6 t GPI 1~8 - This item displays input signal’s ID when the 3D input format is DUAL STREAM. - This item activate/ deactivate the REMOTE function. - The user may connect an RJ-45 jack to the REMOTE terminal on the rear of the unit and designate a function for each pin. - The default settings are as follows : PIN 1 : Analog Channel PIN 2 : HDMI Channel PIN 3 : SDI-A Channel PIN 4 : SDI-B Channel PIN 5 : TALLY R PIN 6 : TALLY G - PIN 7 is POWER ON/OFF use only, PIN 8 is GND. REMOTE (RJ-45) 1: Pin1 2: Pin2 3: Pin3 4: Pin4 5: Pin5 6: Pin6 7: Pin7 8: GND 14 Multi Format LCD Monitor 1 8 Settable Values NONE, Analog Channel, HDMI Channel, SDI-A Channel, SDI-B Channel, TALLY R, TALLY G, TALLY Y, UNDER SCAN, 1:1 SCAN, ASPECT, H/V DELAY, BLUE ONLY, 16:9 MARKER, 4:3 MARKER, 4:3 ON AIR MARKER, 15:9 MARKER, 14:9 MARKER, 13:9 MARKER, 1.85:1 MARKER, 2.35:1 MARKER, 1.85:1&4:3 MARKER, CENTER MARKER, SAFETY AREA 80%, SAFETY AREA 85%, SAFETY AREA 88%, SAFETY AREA 90%, SAFETY AREA 93%, SAFETY AREA 100% 5. Menu Operations [4] GPI / UMD t XLR TALLY On/Off - Used to set Tally operation according to the input level of TALLY IN terminal which is among the terminals of XLR 4P connector in the rear. t XLR TALLY Operating Level - Used to set the input level of Tally operation. (Open&Low : less than 0.6V, High : more than 2.5V) - High: Set the level as “High” to activate the Tally and set the level as “Low” to inactivate the Tally. - Low: Set the level as “Low” to activate the Tally and set the level as “High” to inactivate the Tally. t Momitor ID - Sets the ID of each monitor for the TV Logic control protocol or DYNAMIC UMD using RS422/485 communication. - Available values are between 0, 1, 2 ~ 125. t XLR TALLY Color - Used to set Tally color. - Available colors are Red and Green. t UMD Display - This item sets UMD, ANC and DYNAMIC UMD. * UMD : Displays user customized characters on screen. * ANC: Displays characters embedded in SDI signal. * DYNAMIC UMD: Displays incoming character or tally signal from TSL Protocol. t UMD Character - Customizes the characters for Under Monitor Display. - Alphabets, numbers and special symbols are available. - Maximum of 8 characters are available. t UMD Position - Used to set position of UMD. - Activates in order : [Left Top]-[Mid Top]-[Left Bottom]-[Mid Bottom]-[Left Bottom]-[Left Top]. Multi Format LCD Monitor 15 5. Menu Operations [5] Waveform t Select Line Position tWaveform Intensity - Controls the brightness of the WAVEFORM/ VECTOR display. - Available values are between 0 ~ 30. The higher the number the brighter the waveform will be. tWaveform Trans - Controls the transparency level of the WAVEFORM/VECTOR. - Available values are OPAQUE and TRANS. * If the option is set to OPAQUE, the main OSD will overlap with the waveform/vector. However, it will automatically display it as transparent and goes back to opaque if the main OSD disappears. tWaveform Size - Controls the size of WAVEFORM/VECTOR. - Available modes are NORMAL and LARGE. tLine Waveform - This item is utilized to display the entire data or one line data on the waveform. - Used to select specific Vertical Line for Waveform/Vectorscope. - It is available when LINE Waveform is activated. - To activate this feature, go to [WFM/LevelCHK][Waveform/Vector]-[Select Line Position] and use the Knob to select a vertical line. - Control range varies according to the resolution of the input SDI signal. * PAL : Min 17, Max 522 * NTSC : Min 23, Max 623 * 720p : Min 26, Max 750 * 1080i : Min 21, Max 1123 * 1080p : Min 42, Max 1121 - Control range for Analog signal varies according to the output resolution of the singnal. * Min 0, Max 600 t Luma(Y’) Zone Check - Displays the Luma(Y’) level of the input image in colors. - May select between [Color Pattern] or [Zebra Pattern]. - Each pixel’s Y’ analized and changed to a certain color or zebra pattern according to the Index on the right side of the screen. - When a pixel’s Y’ level is under 0%(16), the color / diagonal line will be colored Green. - When the pixel’s Y’ level is over 100%(235), the color / diagonal line will be colored Red. - When the Y’ level of a pixel is between 0~100%, the pixel is displayed with Gray, except for selected Luma Zone. - In the [Color Pattern] mode, a 5% zone of the selected Y’ level will be colored Pink(5%) and ±10% will be colored Yellow(-10% from Pink) and Cyan(+10% from Pink). - In the [Zebra Pattern] mode, ± 5% of the selected Y’ Level will be displayed with diagonal lines. t Luma(Y’) Zone Adjust - Used to set the Y’ level to be colored Yellow, Pink and Cyan in [Color Pattern] mode, or to set Y’ level zone to be displayed with diagonal lines in [Zebra Pattern] mode simply by scrolling the Knob. - Available values are 0 ~ 100%. * See section “7. Other Functions -> [6] Luma(Y’) Zone Check” for more information. 16 Multi Format LCD Monitor 5. Menu Operations [5] Waveform t C Min - Used to set the minimum chroma(C’) level from 0 to 255. - Pixels with values exceeding the min C’ level will blink in the screen, and displayed as red on the Wavefo rm. t Y Picture Blink - Used to set whether or not to blink pixels with values exceeding Y MAX and Y MIN. t C Picture Blink - Used to set whether or not to blink pixels with values exceeding C MAX and C MIN. t Range Error - Used to set whether or not to activate Y MAX, Y MIN, C MAX, C MIN, Y PICTURE BLINK and C PICTURE BLINK functions. - The values of Y MAX, Y MIN, C MAX, C MIN are indicated in Waveform/Vectorscope. - If [Y PICTURE BLINK] or [C PICTURE BLINK] is enabled, the section of image that exceeds the selected values of Y MAX, Y MIN, C MAX and C MIN shall blink. * See section “Other Function -> [8] Range Error” for more information. t Y Max - Used to set the maximum luma(Y’) level from 0 to 255. - Pixels with values exceeding the max Y’ level will blink in the screen, and displayed as red on the Waveform. t Y Min - Used to set the minimum luma(Y’) level from 0 to 255. - Pixels with values exceeding the min Y’ level will blink in the screen, and displayed as red on the WaveForm. t C Max - Used to set the maximum chroma(C’) level from 0 to 255. - Pixels with values exceeding the min C’ level will blink in the screen, and displayed as red on the Waveform. Multi Format LCD Monitor 17 5. Menu Operations [6] Audio t Level Meter Reference - Display the default audio level meter value, Available options are -18dB and -20dB. - Audio level meter within selected value turns to green and exceeded audio level is displayed in yellow. - Audio level exceeding -4dB is displayed in red. t Level Meter Size - Used to control the size of the audio level meters. - Available options are NORMAL and LAGRE. t Level Meter Decay Time t Audio Volume - Used to control the output volume for the internal speakers or [AUDIO OUT] on the back of the monitor. - Control range is from 0 to 30. t Em. Audio Left/Right - Used to set embedded audio channel for internal speaker or [AUDIO OUT] terminal on the back of the monitor. - In SDI mode one of the Off or CH1~CH16 can be selected. In HDMI(HDCP 1.1 Version) mode, Left and Right are set to CH1 and CH2 respectivley. - HDMI(HDCP 1.1 Version) Input: Channel 1 is displayed on the top left and Channel 2 is displayed on the top right. t Level Meter - Used to set the Level Meter for the embedded audio. - Available options are OFF, 16 CH(HOR.) and 16 CH(VER.) - SDI Input : [Off]-[16CH(Hor.)]-[16CH(Ver.)] - HDMI Input: [Off]-[2CH(Hor.)]-[2CH(Ver.)] * 16 CH(HOR.) : Displays 8 channels on top left and 8 channels on top right of the screen horizontally. * 16 CH(VER.) : Displays 8 channels on center left and 8 channels on top right of the screen vertically. t Level Meter Display (SDI Only) - Used to set the display method for audio level meter. - Activates only in SDI mode. - Available modes are Group and Pair. 18 Multi Format LCD Monitor - Sets the reduction time for max value indication of audio signals. - Control range is from MIN 0 to MAX 100. Bigger number means a longer display time for max value. 5. Menu Operations [7] Display & Set t System Default - Used to initialize OSD values to factory default. t Back Light - Used to indicate the backlight level. - In case of System Default, the value returns to factory default(after color calibration). - Available values are from 0 to 50. t Internal Pattern - Generates ColorBar, Pluge and Grayscale Pattern internally. - Selectable range for Gray Pattern is from 0% to 100% with 5% increment. * See section “6. Other Function -> [12] Iternal Pattern” on page 32 for more information. t H/V Flip - Used to the displayed image to be flipped horizontally or vertically. - This feature provides flexible mounting options for camera operators. - In [AUTO] mode, the sensor perceives monitor moving and the screen flips automatically. - Activates in order : [H Flip]-[V Flip]-[H/V Flip][Auto]. t 3G Format - Used to select 3G-SDI A/B input format among NORMAL MODE(AUTO - A 422 10BIT_ YCbCr 50/60P), A 444 10/12BIT_YCbCr, A 444 10/12BIT_RGB, A 422 12BIT_YCbCr, B 444 10/12BIT_YCbCr, B 444 10/12BIT_RGB, B 422 12BIT_YCbCr, B 422 10BIT_YCbCr 50/60P. - In NORMAL MODE, automatically detected when Payload signal is contained. t Firmware Version - Displays current firmware version. t Zoom - Used to magnify the image up to 90% on a pixel basis and is displayed on full screen. * (e.g.,10% Zoom : If the input signal’s resolution is 1920 x 1080, only 90% (1728(H) x 976(V)) of the image would be shown on full screen without 10% (192(H) x 108(V)) of the image.) * See section “7. Other Functions -> [5] Zoom” for more information. t Zoom H/V Scroll - Activated when [Zoom] mode is selected. - Used to move the enlarged image to the left/ right or Up/Down by controlling the Knob. t DSLR Camera Sel. - Select the DSLR camera to be used with LVM074W. [DSLR SCALE] function. Available models are [CANON 5D/7D], [SONY A77] and [NIKON D7000]. * DSLR cameras’ screen size and aspect ratio of Live / Record / Playback modes vary according to their manufacturer. t DSLR SCALE (HDMI Format Only) - This is a special function for CANON/NIKON/ SONY DSLR cameras. - Used to scale the image with different resolution as to the operation mode(Live View/ Record/ PlayBack) of the camera to fullfill the screen. * See section “7. Other Functions [9] DSLR SCALE” for more information. Multi Format LCD Monitor 19 5. Menu Operations [7] Display & Set t Closed Caption - This item selects Closed Caption. - Available modes are OFF, 708, 608(LINE21), 608(ANC). * 608 : CEA-608-B, 708 : CEA-708-C standard display only. t TimeCode Enable - Used to set the time code among OFF, VITC and LTC. t Focus Assist - Focus Assist helps the shooters to easily find out the exact area in the picture with good focus, simply by adding colors on the shape or boundaries of the object in the picture. - Activates in order of [(Mono) On][(Color] On] [Off] * (Color) On : Only the boudary of the area with good focus is displayed with the designated color. * (Mono) On : The boundary of the area with good focus is colored with the designated color, while the rest of the areas(pixels) have only Y’(Luma) signals to be black & white image. * See section “7. Other Functions [7] Focus Assist” for more information. t Focus Assist Color - Used to select a color for FOCUS ASSIST among red, green and blue. t Focus Assist Level - Used to set the edge difference value between the edges in an image. - Available values are from 0 to 100. Larger value means more sophisticated detail detection. - Designated color is displayed when the difference of the edges exceeds the previously set value. - This feature is available only when the FOCUS ASSIST mode is activated. 20 Multi Format LCD Monitor 6. Button Functions [1] Analog Button * This product is capable of processing all input signals usable in ANALOG mode. * The Analog input settings are as follows: 1. Press the ANALOG button on the front of the product and activate the menu below : 2. Use [UP]/[DOWN] Knob to select desired input source, then enter to confirm. 3. Input signal resolution displays on the bottom of OSD menu. 4. Press ANALOG button again to remove the OSD menu from display. 5. Menu will be disappeared when time set is over from the screen. [2] SDI Button * LVM-074W unit is capable of processing dual SDI Input signal. 1. Press [SDI] button on the front of the monitor and activate the OSD menu as shown on the below. 2. Input resolution displays on the bottom of the OSD screen. 3. Press [SDI] button again to remove the OSD menu from display. # If no image displays after selecting the desired input mode, check and make sure that your connection is not lose or disconnected. [3] HDMI Button * LVM-074W unit is capable of processing dual SDI Input signal. 1. Press [HDMI] button on the front of the monitor and activate the OSD menu as shown on the below. 2. Input resolution displays on the bottom of the OSD screen. 3. Press [HDMI] button again to remove the OSD menu from display. # If no image displays after selecting the desired input mode, check and make sure that your connection is not lose or disconnected. Multi Format LCD Monitor 21 6. Button Functions [4] Function Key Set Button t Used to make a quick setting of the Function Key. 1. Press the function button(F1~F4) on the front of the monitor for more than 2 seconds and activate the OSD menu as follows. [5] SCAN Button t This product supports various scan modes. t Press [SCAN] button on the front of the monitor to activate different scan modes. 1. [Press [SCAN] button continuously to activate various scan modes: ZERO SCAN -> OVER SCAN -> Pixel To Pixel -> USER. 2. The following represents the different types of scan mode. When a scan mode is selected, display skips the next mode if its required condition is not met. - OVER SCAN : Zooms in/out of the image to 96% of its original size without changing the aspect ratio of. - ZERO SCAN : Zooms in/out of the image without changing the aspect ratio. - Pixel To Pixel SCAN : 1:1 pixel mapping of original image. This feature is available only when the size of the original image is bigger than the screen size. Press [ENTER] button to rotate the position. MID LEFT -> TOP LEFT -> TOP MID -> TOP RIGHT -> MID RIGHT -> BOT RIGHT -> BOT MID -> BOT LEFT 2. Move to desired function and press [ENTER] button to select. 3. Once the function is set, press the Function button(F1~F4) to activate the function. <MID CENTER> <MID LEFT> <TOP LEFT> <TOP MID> <TOP RIGHT> <MID RIGHT> <BOT RIGHT> <BOT MID> <BOT LEFT> <Position change in Pixel To Pixel> 22 Multi Format LCD Monitor 7. Other Functions [1] Pixel to Pixel * LVM-074W monitor provide pixel count info using Pixel to Pixel mode. * Select [Scan] mode in the OSD menu to activate the[Pixel To Pixel] mode. * After activation of [Pixel To Pixel] mode, use the Knob to move the position. ,QSXW +' S $FWLRQ $YDLODEOH0RGHV >6FUROO83@ &ORFNZLVH &HQWHU!/HIW7RS!5LJKW7RS !5LJKW%RWWRP!OHIW%RWWRP !&HQWHU!ಹ >6FUROO '2:1@ &RXQWHU FORFNZLVH &HQWHU!/HIW%RWWRP!5LJKW %RWWRP!5LJKW7RS!/HIW 7RS!&HQWHU!ಹ # Pixel to Pixel mode is not available for Graphic Signal input. # Pixel to Pixel mode works for SD signal, when the input resolution is lower than the monitors native resolution. t Positions in HD Signal 1080i/1080p mode UP UP DOWN DOWN <CENTER> <LEFT TOP> UP <RIGHT TOP> UP DOWN DOWN <RIGHT BOTTOM> <LEFT BOTTOM> Multi Format LCD Monitor 23 7. Other Functions [2] User Aspect t Select [Aspect] mode in the OSD menu to activate the[User Aspect] mode. t After activation, press the Knob to get ready for controlling. t Adjust the ratio using the Knob. t Control range for width : Min[100] ~ Max[1024] t Control range for height : Min[100] ~ Max[600] t The size-adjusted picture always stay in the center of the screen. 24 Multi Format LCD Monitor # To adjust the 16:9 aspect ratio of 1920X1080 resolution into 2.35:1 aspect ratio, adjust the width and height as 1024 x 436. 7. Other Functions [3] Waveform / Vectorscope t Waveform Y - Displays the Luma(Y’) component of the input signal into waveform. t VectorScope - Displays the color components ‘B-Y’ and ‘R-Y’ of the input signals onto the X-Y axis. - Two different types of Vetorscopes are displayed according to SD or HD input signals. - 100% and 75% scales are indicated on the Vetorscope. t Waveform Cb, Cr - Displays the Cb, Cr components of the input signal into waveform. t Vector WIDE t YCbCr t Wave Vector t Vector YCbCr t Full Wide(Y) t Full Wave(Y) t Full Vector Multi Format LCD Monitor 25 7. Other Functions [4] Line Select (Waveform/VectorScope) [5] Zoom t Used to select specific Vertical Line for WaveForm/VectorScope. t Used to magnify the input signal from 0% to t It is available when LINE WaveForm is activated. t Supports Zoom Width Scroll / Zoom Height t To activate this feature, go to [WFM/LevelCHK][WaveForm/Vector]-[Select Line Position] and use the Knob to select a vertical line. 90%. Scroll function. t Zooms IN/OUT focused on the scrolled area. t Control range varies according to the resolution of the input SDI signal. * PAL : Min 17, Max 522 * NTSC : Min 23, Max 623 * 720p : Min 26, Max 750 * 1080i : Min 21, Max 1123 * 1080p : Min 42, Max 1121 t Control range for HDMI/Analog signal varies according to the output resolution of the signal. *Min 0, Max 600 <ZOOM OFF> * Selected line is indicated on the screen. <ZOOM 50%> <ZOOM 75%> 26 Multi Format LCD Monitor 7. Other Functions [6] Luma(Y’) Zone Check Color Pattern Type Zebra Pattern Type t Displays the Luma(Y’) level of the input image in colors. t Displays the pixels with designated Luma(Y’) levels with zebra pattern. t Y’ ≥ 100% : Pixels with higher Y’ level than 100 turn to red. t Y’ ≥ 100%: Pixels with Y’ level over 100% turn to red diagonal line. t Y’ ≤ 0% : Pixels with lower Y’ level than 0 turn to green. t Y’ ≤ 0% : Pixels with Y’ level under 0% turn to green diagonal line. t Pixels with Y’ levels designated by the user are displayed as following colors - yellow, pink, cyan. t User defined Y’ levels are displayed as black diagonal line. t Factory Default Y’ (Border line between pink and yellow) level is 75% and pink color is assigned to pixels with Y’ level from 70% to 75%. t Yellow color is assigned to pixels with Y’ level from 75% to 85%, and Cyan from 60% to 70%. t This function is designed for better performance in setting the exposure of lighting when shooting with vDSLR cameras. <Luma Zone Check OFF> t Factory Default Y’ level is 70% and the pixels with Y’ level from 65% to 75% is displayed with zebra pattern t Pixels with 10% of Y’ level is displayed as black diagonal line. t This function is designed for better performance in setting the exposure of lighting when shooting with vDSLR cameras. <Luma Zone Check ON_Zebra Pattern Type> <Luma Zone Check ON_Color Pattern Type> Multi Format LCD Monitor 27 7. Other Functions [7] Focus Assist t Focus Assist function assigns a color to the pixels in the shape or boundary area of the image to inform the user to make the best focus. t With this function, user can easily differenciate the focused area from out-focused area especially shooting with shallow depth of field. t Available types are [Mono] and [Color] types. * [Mono] : Background image is mono type. [Color] : Background image is original color type. [8] Range Error t Pixels with Y’ or C’ levels exceeding the designated levels of Y MAX, Y MIN, C MAX and C MIN shall blink. t Analyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted level of signals and for better exposure setting. <Focus Assist OFF> <Range Error OFF> <Focus Assist ON> <Range Error ON> <Focus Assist ON> 28 Multi Format LCD Monitor 7. Other Functions [9] DSLR Scale t This function is designed for some DSLR cameras(Canon 5D, 550D and Nikon D7000) that output different resolution from the operation mode (preview, recording, playback). t Select the Camera model in the [Display/Vide][DSLR Camera Sel.] menu. CANON t In StandBy mode of Canon 5D Mark II, 1080i of HD resolution is indicated. However, real output resolution is 1620x1080 so blank area is displayed on the screen because the 16:9 aspect ratio is not realized. <DSLR Scale OFF> tIn this case, use DSLR SCALE function to enlarge the 1620x1080 image and display full screen. t In Recording mode of CANON 5D Mark II, the output resolution is SD(480p). t Although it is SD, the real output resolution is 640x390 not 720x480. t DSLR SCALE function scales the 640×390 image to 1280x800(panel resolution) and display full screen. NIKON t In StandBy/Record mode of NIKON, actual resolution of the output signal from HDMI terminal is 952x634, failing to display 16:9 aspect ratio and making marginal blank area. Activating DSLR SCALE function will scale the 952x634 raster image to fill the full screen. <DSLR Scale ON> Multi Format LCD Monitor 29 7. Other Functions [10] HDMI To SDI Conversion-Out t Video source from ‘HDMI input’ terminal can be output through ‘SDI throughout’ terminal. ఐNote: HDSLR camera manufacturers usually specify the resolution and frame rate for the recording. The signal format that is output through HDMI terminal of cameras may differ from makers to makers. The signal format for HDMI output and playback function of Canon HDSLRs is 59.94i. And even though 60i or 60p is specified in the specification of the cameras, the actual recording or HDMI output format would be 59.94i or 59.94p. [12] Internal Pattern t Displays internally generated test patterns. t The pattern consists of ColorBar and Pluge+ Grayscale Patterns. Full screen colors of various gray levels(0~100%) are also embedded. t SDI Input formats are output as below : ,QSXW+'0, 2XWSXW6', LS LS L6037(0 L,785%7 <Color Bar + Pluge Pattern> t In HDMI Color format, RGB mode is not available. <Gray Pattern> 30 Multi Format LCD Monitor 8. Product Specifications LVM-074W Size LCD Input Connector Output Input Signal Analog Input Spec Resolution 1024 X 600 (16:9) Pixel Pitch 0.15(H) X 0.15(W) mm Color Depth 16.7M (True 8bit) Viewing Angle H : 170 degrees / V : 170 degrees Luminance of white 400 cd/ m2(ٻCenter) Contrast Ratio 800 : 1 Display Area 153.6(H) X 90.0(V) mm 3 X RCA Analog Video Input 2 X BNC SDI 2 Channel Input 1 X HDMI HDMI Input 1 X BNC SDI Channel (Active Loop Through), +'0,6',&RQYHUVLRQ ;+'0, +'0,+'0, Analog CVBS/ S-Video / Component Video / RGB 3G-SDI 2.970Gbps HD-SDI 1.485Gbps SD-SDI 270 Mbps HDMI 480i / 480p / 720p / 1080i / 1080p CVBS 1.0Vpp (with Sync) S-Video 1.0Vpp (Y with Sync), 0.286Vpp(C) Component 1.0Vpp (Y with Sync), 0.7Vpp (Pb,Pr) SMPTE-425M-A/B 1080p(60/59.94/50/30/29.97/25/24/23.98/30sF/29.97sF/25sF/24sF/23.98sF) 1080i(60/59.94/50) SMPTE-274M SDI Input Signal Formats 7” 1080i (60/59.94/50) 1080p (30/29.97/25/24/24sF/23.98/23.98sF) SMPTE-296M 720p (60/59.94/50) SMPTE-260M 1035i (60/59.94) SMPTE-125M 480i (59.94) ITU-R BT.656 576i (50) Audio In Embedded Audio / Analog Stereo (Phone Jack) Audio Out Analog Stereo (Phone Jack), Internal speaker (Mixed Mono) Power DC 12V Power Consumption (Approx.) 10 Watts(Typ.) Operating Temperature 0Gto 40G(32එGto 104එP Storage Temperature -20Gto 60G(-4එGto 140එP Main Body Dimensions (mm/inch) 203 X 131 X 34.6 (7.99 X 5.16 X 1.36) Main Body Dimensions with stand (mm/inch) 240 X 145.8 X 69 (9.45 X 5.74 X 2.72) Box Dimensions (mm/inch) 330 X 250 X 180 (12.99 X 13.78 X 7.09) Weight 660g / 1.46 lbs / 940g / 2.07 lbs (with stand) Basic Accessories DC Power adapter, AC Power Cord, Camera Mount Support Optional Accessories Carrying Case, Rack Mountable Kit, Sun-Hood, External Acylic Protector, Tripod Ball Head, V-Mount, Gold Mount, External Tally * The specification above may be changed without notice. Multi Format LCD Monitor 31 9. Optional Accessories Sun-Hood V-Mount Tripod Ball Head External Tally 32 Multi Format LCD Monitor External Acrylic Protector Gold-Mount Carrying Bang with Hood (Rain Cover) Rack Mountable Kit MEMO Multi Format LCD Monitor 33 MEMO 34 Multi Format LCD Monitor FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv 12F, ACE HIGH-END 8, 345-4 Gasan-dong, Geumcheon-gu, Seoul, 153-802, KOREA TEL : +82-70-8668-6611, FAX : 82-2-6123-3201, E-mail : sales@ t vlogic.co.kr ">
Advertisement
