Bar Joist Sway Brace Attachment

Bar Joist Sway Brace Attachment
Seismic Bracing
Component of State of
California OSHPD Approved
Seismic Restraints System
Fig. 825 - Bar Joist Sway Brace Attachment
Size Range: One size accommodates all
Fig. 900 Series sway brace attachments. Maximum
Horizontal Design Load 2015 lbs (8.96kN).
Material: Steel
Function: To attach sway bracing and hanger assemblies
to steel open web structural members.
3/8"
Features: This product’s design incorporates a concentric
attachment point which is critical to the performance of
structural seismic connections. NFPA 13 indicates the
importance of concentric loading of connections and
fasteners. Permits secure non-friction connection without
drilling or welding. Unique design reinforces point of connection to joist. Break off head
set screw design assures verification of proper installation torque (min. 31 ft.-lbs.).
Set Screws &
Hardware Included
Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL).
Approved by Factory Mutual Engineering (FM). Included in our Seismic Restraints
Catalog approved by the State of California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and placement information
relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems
Guidelines.
Maximum Design Load 2015 lbs. (8.96kN)
UL Listed as Hanger Attachment for
6” (150mm) Pipe at Maximum Spacing
Installation Instructions: Fig. 825 is the structural attachment component
of a longitudinal or lateral sway brace assembly. It is intended to be combined
with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe"
attachment, to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines
should be followed.
To Install: Place the Fig. 825 on the steel beam, tighten the cone point set screws
until heads break off. Attach other TOLCO
transitional attachment fitting, Fig. 909,
910, 980 or 986. Transitional fitting
Max.
attachment can pivot for adjustment to
6” (152.4mm)
Bar joist shown attached to
proper brace angle.
Finish: Plain, Electro-Galvanized and
HDG
1”
(25.4mm)
1/2”
Bolt & Nut
Furnished
Top View
various roof materials
Shown with
Fig. 910
Approx. Wt./100: 247.5 Lbs. (112.2kg)
Shown with
Fig. 910
Order By: Figure number and finish
US Patent #6,098,942,
Canada Patent #2,286,659
Fig.
825
Fig. 1000
May pivot in any
direction
May pivot in any
direction
Front View
Side View
FM Approved Design Loads
30°-44°
45°-59°
60°-74°
lbs. / (kN) lbs. / (kN) lbs. / (kN)
75°-90°
lbs. / (kN)
Maximum
3/8” Thick Flange
Lateral - Parallel to
Structural Member
990
1360
1670
1860
(4.40)
(6.05)
(7.43)
(8.27)
Maximum
Thick Flange
Longitudinal Perpendicular to
Structural Member
460
630
770
860
(2.04)
(2.80)
(3.42)
(3.82)
3/8”
Shown with
Fig. 910
Fig. 825
Fig. 1000
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers & Supports
174
Seismic Bracing
(9.5)
Seismic Bracing
Fig. 825A - Bar Joist Sway Brace Attachment
Size Range: One size accommodates all Fig. 900 Series sway brace
attachments. Maximum Horizontal Design Load 1600 lbs (7.11kN).
Material: Steel
Set Screws &
Hardware Included
Function: To attach sway bracing to steel open web structural members.
3/8"
Seismic Bracing
Features: This product’s design incorporates a concentric attachment
point which is critical to the performance of structural seismic connections.
NFPA 13 indicates the importance of concentric loading of connections
and fasteners. Permits secure non-friction connection without
drilling or welding. Unique design reinforces point of connection to joist.
Break off head bolt design assures verification of proper installation.
(9.5)
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL). For additional load, spacing and placement information
relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems
Guidelines.
Installation Instructions: Fig. 825A is the structural attachment component of
a longitudinal or lateral sway brace assembly. It is intended to be combined with a
TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe"
attachment to form a complete bracing assembly. NFPA 13 and/or OSHPD
guidelines should be followed.
Maximum Design Load
1600 lbs.
To Install: Place the Fig. 825A on the steel beam, tighten the cone point set
screws until heads break off. Attach other TOLCO transitional attachment fitting,
Fig. 909, 910, 980 or 986. Transitional fitting attachment can pivot for adjustment
to proper brace angle.
Finish: Plain or Electro-Galvanized
Approx. Wt./100: 154.5 Lbs. (70.1kg)
Order By: Figure number and finish
Patent #6,098,942
Bar joist shown attached to
various roof materials
May pivot in any
direction
Max.
6” (152.4mm)
Shown with
Fig. 980
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
175
Pipe Hangers & Supports
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement