Complete Catalog

Complete Catalog
2007 Catalog
NEWCO - Cast Steel Bolted Bonnet Valves
Gates • Globes • Angles • Swing Checks • Tilting Disc Checks • Stop Checks
Product Line Technical Data
Corporate Headquarters
Houston, Texas
1300 Gazin St.
Houston, TX 77020
Tel: 713.675.8631
Fax: 713.675.1589
Toll Free: 800.231.3505
www.NewmansValve.com
Manufacturer of
Table of Contents
Introduction..................................................................................................................................................................... 1
NEWMANS History
Mission Statement
Company Profile
Product Technology
NEWCO Cast Steel Valves Product Applications................................................................................................... 2 & 3
Gate Valves OS&Y
Globe Valves
Angle Valves
Swing Check Valves
Tilting Disc Check Valves
Stop Check Valves
Angle Stop Check Valves
Product Range................................................................................................................................................................. 4
Valve & Identification Tag Overview.............................................................................................................................. 4
How To Order NEWCO Products...................................................................................................................................... 5
Body/Bonnet Materials......................................................................................................................................................... 6
Trim Materials........................................................................................................................................................................ 6
NEWCO Features and Benefits............................................................................................................................................. 6
Pressure Temperature Ratings ANSI B16.34 - 2004.......................................................................................................... 7
Flange Dimensions - ANSI B16.5.......................................................................................................................................... 8
Auxiliary Connection Locations (Bypasses, Drains, etc.)................................................................................................. 9
Products & Services............................................................................................................................................................ 10
VALVES
Valves
Manual Operations
Valve Modification
AUTOMATION
Valve and Damper Actuation
Automation Site Services
Automation Shop Services
Controls and Digital Communications
Cast Steel Bolted Bonnet Valves Dimensional Data and Expanded Views..................................................11 thru 57
Gates........................................................................ 2” thru 48” *...............................Class 150 thru 1500..........................................11 thru 17
Globes....................................................................... 2” thru 14”..................................Class 150 thru 1500......................................... 19 thru 25
Angles....................................................................... 2” thru 12”..................................Class 150 thru 600............................................27 thru 31
Swing Checks........................................................... 2” thru 24”...................................Class 150 thru 1500......................................... 33 thru 39
Tilting Disc Checks.................................................. 2” thru 12”..................................Class 150 thru 300............................................41 thru 44
Stop Checks............................................................. 2” thru 16”...................................Class 150 thru 1500..........................................45 thru 51
Angle Stop Checks................................................... 2” thru 12”..................................Class 150 thru 600........................................... 53 thru 57
* Dimensions in this catalog are through 48”, larger sizes available upon request.
Limited Warranty...........................................................................................................................................................58
Applicable Standards...................................................................................................................................................59
American Petroleum Institute (API)
American Society of Mechanical Engineers (ASME)
American Society Non-destructive Test (ASNT)
American Society for Testing and Materials (ASTM)
British Standards Institute (for reference only) (BS)
Canadian Standards Association (CSA)
International Organization for Standardization (ISO)
Manufacturers Standardization Society (MSS)
National Association of Corrosion Engineers (NACE)
Terms and Conditions................................................................................................................................................ 60 & 61
Definitions
General Terms and Conditions
Service Terms
Branches and Locations..................................................................................................................................................... 62
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Steel Bolted Bonnet Valves
Product Line Technical Data
Newmans History
Newco Valves, L.P., a Texas limited partnership, dba Newmans, and its wholly owned subsidiary, Newmans Valves, LTD, manufactures,
markets and sells Gate, Globe, Check and Ball valves ranging in sizes from 1/4” through 60” ANSI Class 125 thru 4500 lbs. The valves
are manufactured to ASME, API and MSS specifications from Carbon (cast and forged), Stainless (cast and forged including Duplex and
Super Duplex products), and other alloys (low alloy steels, Inconel, Hastelloy, and noble alloys). “Newco”, “OIC” and “Cooper Valves” brand
name valves are used in various applications from low pressure processes to specialty applications within the refining, petrochemical,
power, pulp and paper, and marine industries. The companies provide both standard product and special designs for their focused
industries.
Newmans, L.P., also offers value added services including modifications or actuations and installation of by-passes, bore changes and
gear operators for its valves. Some of these modifications include various trim changes covering stems, packing and gaskets, new bolting
or changes in the flange surface. In addition, Company operations include marketing, product design, quality control, vendor qualification
and value-added services for its product lines.
Timeline
1936: The Company’s primary focus was wholesale plumbing and field salvage.
1946: The Company was incorporated under the Newmans name. At that time the focus was changed to the PVF industry until acquired
by the Jordan Group in 1989.
1976: Newmans opened its Canadian branch under the name of Newmans Valve Limited.
1984: Precision Actuation Services (PAS) was opened to perform valve modification and actuation services.
1993: In March, Newmans acquired “OIC” and added this trade mark to its business.
1995: Precision Castparts Corporation (PCC) acquired Newmans. The business was operated as a part of the PCC Flow Technologies Division.
2003: On December 26th the business was purchased by the current group of partners that include the original family owners of Newmans.
2005: In June, Newco Valves, L.P., purchased the operations of Cooper Valves from Dresser, Inc., and added specialty alloys and materials
to its valve products line.
2006: Newmans opened its Shanghai, China office for service to the Far East market, direct shipments globally and service to the Far East
for global project management.
Over the years Newmans has established an excellent reputation for providing a broad product offering from world wide sources at competitive
prices and a high level of quality and customer service. The company maintains five (5) stocking warehouse locations in North America and
one (1) in Shanghai, China.
Newmans services its markets through a network of distributors and direct sales personnel. The Companies utilize the Infor [email protected]
Work ([email protected]) information system. [email protected] is a fully integrated system allowing all Newmans’ facilities to operate in an integrated
and efficient manner.
Mission Statement
It is our goal to be known and respected in the Industry as “The Reliable Source” for our extensive knowledge and superior service.
Measured by keeping our word, we will deliver quality products on time at a fair value.
We achieve the above dealing with integrity in an open and flexible environment allowing people access to valuable information to make good
and timely decisions. We believe that all this can be accomplished yielding great rewards for all involved while maintaining a balance in life.
Company Profile
Newmans is recognized as a global valve manufacturing company providing product to the market on a world-wide basis. The NEWCO,
OIC and COOPER trademarks are recognized and respected the world over for their high quality and ability to meet the industry’s most
exacting standards. Newmans manufactures and markets one of the industry’s broadest product lines suitable for most applications and
market segments. Newmans is fully committed to engineering excellence and product innovation supported by a highly qualified technical
engineering staff. Superior customer service is backed by the inventories of finished valves shipped daily from the five divisions located
strategically throughout North America.
Product Technology
Newmans manufactures Gate, Globe, Check, Stop Check, Tilting Disc, Floating Ball, Trunnion Ball, and QuadroSphere Ball valves in a full
range of materials, valve styles, and pressure classes. Cast carbon steel and low-alloys, forged valves, cast iron and ductile iron valves
are manufactured under the NEWCO trademark. 300 series stainless steel and Alloy 20 are produced and marketed under the OIC
trademark. Other exotic alloys are manufactured under the Cooper trademark.
Newmans manufactures and stocks valves in sizes from 1/4” to 60” in diameter and in pressure classes from 125 to 4500 lbs. Larger
sizes are available on request.
Newmans facilities operate under ISO 9001-2000 series registration. All valves are compliant to the industry standards of API, ASTM, and
ASME. Inspection and testing is maintained throughout the manufacturing process to verify compliance to these standards as well as any
specific customer requirements.
Customer service is further enhanced by complete modification and actuation capabilities. This capability allows Newmans to provide
rapid deliveries of special valve requirements to meet the customer’s delivery needs.
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Newco Cast Steel Valves Product Applications
The sole purpose of a valve is to regulate flow throughout a fluid processing/transport system whether it is starting, stopping, throttling,
or simply controlling flow rate. Gate, Globe, Angle Globe, Swing Check, Tilting Disc Check, and Stop Check valve configurations are
designed to perform different functions within a fluid system. This section is designed to help you determine which Newmans valve will
best address your application(s).
Gate Valves OS&Y
Sizes: 2” thru 60” Class: 150 thru 1500
Gate valves are ideal for bidirectional, low-friction flow and 100% shut-off. Due to the
flow characteristics of the wedge-to-seat design, gate valves should be operated in the
full-open or full-close position. Concentrated flow across the seats of a partially
opened gate valve risks possible seat damage, therefore throttling is not
recommended. Gate valves are utilized in applications where minimum pressure drop is
necessary.
Globe Valves
Sizes: 2” thru 18” Class: 150 thru 1500
Globe valves are ideal for unidirectional, controlled flow. The flow characteristics of a globe valve is
repeatable, consistent, and easy to control at any open position, which makes the design suitable
for throttling applications.
Note: If line pressure drops below 20%, cavitation, vibration, noise, may be caused, resulting in
hardware damage. If these conditions are likely, consult your Newmans representative for
recommendations.
Angle Globe Valves
Sizes: 2” thru 12” Class: 150 thru 600
Angle Globe valves are ideal for unidirectional, controlled flow. The flow characteristics of a
Angle Globe valve is repeatable, consistent, and easy to control at any open position, which
makes the design suitable for throttling applications.
Note: If line pressure drops below 20%, cavitation, vibration, noise, may be caused, resulting in
hardware damage. If these conditions are likely, consult your Newmans representative for
recommendations.
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Swing Check Valves
Sizes: 2” thru 24” Class: 150 thru 1500
Swing Check valves yield minimal restriction to low velocity environments and
are ideal for preventing pipeline back flow in unidirectional flow applications in
horizontal or upward (vertical) flow piping.
Tilting Disc Check Valves
Sizes: 2” thru 24” Class: 150 thru 1500
Tilting Disc Check valves yield minimal restriction to low velocity environments
and are ideal for preventing pipeline back flow in unidirectional flow
applications in horizontal or upward (vertical) flow piping. The Tilting Disc
design helps to minimize the slamming of the disc when back-flow occurs.
Stop Check Valves
Sizes: 2” thru 18” Class: 150 thru 1500
Stop Check valves are designed much the same as Globe Valves, except there is no mechanical
connection (Split Lock Ring) between the stem and disc. They are designed to give check valve
protection in the event of fluid back flow, and are commonly used to prevent flow from a header fed
by multiple sources when there is a loss in pressure in one of the sources. Stop checks must be
installed with line pressure under the disc so only boiler pressure can raise the disc. Stop Checks
must be installed horizontally.
Angle Stop Check Valves
Sizes: 2” thru 12” Class: 150 thru 600
Angle Stop Check valves are designed much the same as Angle Globe Valves, except there
is no mechanical connection (Split Lock Ring) between the stem and disc. They are designed
to give check valve protection in the event of fluid back flow, and are commonly used to
prevent flow from a header fed by multiple sources when there is a loss in pressure in one of
the sources. Stop checks must be installed with line pressure under the disc so only boiler
pressure can raise the disc.
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Newmans’ Product Range
Brand
Type
Size
Class
Ends
Available Material**
Newco
Cast Carbon
* 2” to 48”
150 - 2500
RF, RTJ, BW
WCB, LCC
Newco
Cast Alloy
2” to 24”
150 - 2500
RF, RTJ, BW
C5, C6, C9, C12, C12A
Newco
Cast Iron
2” to 36”
125
FF
A126 - Cl. B
Newco
Ductile Iron
2” to 36”
150
RF
A395
Newco
Forged Carbon
1/4” to 2”
150 - 4500
FLGD, THRD, SW
A105N, LF2
Newco
Forged Alloy
1/4” to 2”
150 - 4500
FLGD, THRD, SW
F5, F9, F11, F22, F91, F51
Newco
Pressure Seal
2” to 24”
600 - 4500
RF, RTJ, BW
Cast - all grades
Newco
Floating Ball
1/2” to 18”
150 - 600
RF
WCB, LCC, CF8M
Newco
Trunnion Ball &
QuadroSphere
2” to 36”
150 - 2500
RF, BW
A105, LF2, F316, F51
OIC
Cast Stainless
1/2” to 24”
150 - 2500
RF, RTJ, BW
304/L, 316/L, 317/L, 321, 347/H, A20
OIC
Forged Stainless
1/4” to 2”
150 - 4500
FLGD, THRD, SW
304/L, 316/L, 317/L, 321, 347, A20
Cooper
Cast Alloy
1/4” to 24”
150 - 1500
FLGD, THRD, SW, BW
Monel, Inconel, Hastelloy,
Titanium, Zirconium, Duplex
Cooper
Forged Alloy
1/4” to 3”
800 - 1500
FLGD, THRD, SW, BW
Monel, Inconel, Hastelloy,
Titanium, Zirconium, Duplex
Cooper
Ball Valves
1/4” to 3”
1500 PSI
THRD, SW, BW
Monel, Inconel, Hastelloy,
Titanium, Zirconium, Duplex
Cooper
Ball Valves
1/2” to 12”
150 - 900 PSI
FLGD
Monel, Inconel, Hastelloy,
Titanium, Zirconium, Duplex
* Larger sizes available upon request. ** other materials available upon request.
Valve & I.D. Tag Overview
The identification tag displays all construction and
tracking data regarding the respective valve on which it is
attached. Below is a general overview of the identification
tag components.
I.D. Tags are located in 1 of the 3 following areas:
- yoke
- body/bonnet flange
- under the handwheel nut
I.D. Tag Locations
Heat No.
Pressure Temperature Rating
Trim Description
Model
C5/CR13, CR13, HF
FIG. 13F-C5/2
750 PSI @ 100 °F
B16.34 CLASS 300
API 600/ISO10434
NPS 2
S/N 100419
NEWCO
6
300
WCB
77
T5158
Pressure Class
Design Specification
Nominal Port Size
Brand
Size
Pressure Class
Body Material
Pattern
Heat No.
Serial Number
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
How to Order Newco Products
Pressure Class
Note: OIC and Cooper “How to Order” information can
be found in their respective catalogs.
Figure Number
The figure number shown below identifies specific valve configuration
details of Newco valves such as valve type, pressure class, end
connections, body/bonnet & trim materials, and special features.
Please specify end connections, body materials, and trims not listed
below.
When placing an order, please refer to the respective product section of
the catalog for size availability. A detailed description must be included
with any special orders.
1 = Gate, OS&Y
2 = Globe/Globe Stop Check, OS&Y
3 = Swing/Tilting Disc Check
4 = Piston Check
5 = Ball
6 = Gate, NRS
7 = Angle/Angle Stop Check, OS&Y
Fig. 11F-CB2_ _
Body/Bonnet Material
A20 = ASTM A351, CN7M............................................... = Cast Alloy 20
CB = ASTM A216, WCB.................................................. = Cast Carbon Steel
CC = ASTM A216, WCC.................................................. = Cast Carbon Steel
C5 = ASTM A217, C5..................................................... = Cast Alloy Steel (5% Chrome, .5% Moly)
C6 = ASTM A217, WC6.................................................. = Cast Alloy Steel (1.25% Chrome, .5% Moly)
C9 = ASTM A217, WC9.................................................. = Cast Alloy Steel (2.25% Chrome, 1% Moly)
C12 = ASTM A217, C12................................................... = Cast Alloy Steel (9% Chrome, 1% Moly)
12A = ASTM A217, C12A................................................. = Cast Alloy Steel (9% Chrome, 1% Moly, V)
CF3 = ASTM A351, CF3................................................... = Cast Stainless Steel
C3M = ASTM A351, CF3M................................................ = Cast 316L Stainless Steel
CF8 = ASTM A351, CF8................................................... = Cast 304 Stainless Steel
C7L = ASTM A351, CG3M............................................... = Cast 317L Stainless Steel
C8M = ASTM A351, CF8M................................................ = Cast 316 Stainless Steel
C8C = ASTM A351, CF8C................................................. = Cast 347 Stainless Steel
CT = ASTM A351, CG8M............................................... = Cast 317 Stainless Steel
DI = ASTM A395............................................................ = Cast Ductile Iron
FS = ASTM A105............................................................ = Forged Carbon Steel
F3 = ASTM A182, F316L............................................... = Forged 316 Stainless Steel
F5 = ASTM A182, F5..................................................... = Forged Alloy Steel (5% Chrome, .5% Moly)
F7 = ASTM A182, 317................................................... = Forged 317 Stainless Steel
F7L = ASTM A182, F317L............................................... = Forged 317L Stainless Steel
F11 = ASTM A182, F11................................................... = Forged Alloy Steel (1.25% Chrome, .5% Moly)
F22 = ASTM A182, F22................................................... = Forged Alloy Steel (2.25% Chrome, 1% Moly)
F9 = ASTM A182, F9..................................................... = Forged Alloy Steel (9% Chrome, 1% Moly)
F91 = ASTM A182, F91................................................... = Forged Alloy Steel (9% Chrome, 1% Moly, V)
F8 = ASTM A182, F304................................................ = Forged 304 Stainless Steel
F8M = ASTM A182, F316................................................. = Forged 316 Stainless Steel
F8C = ASTM A182, F321................................................ = Forged 321 Stainless Steel
IB = ASTM A126, CLB................................................... = Cast Iron
LCC = ASTM A352, LCC................................................... = Cast Low Temperature Carbon Steel
LF-2 = ASTM A350, LF2................................................... = Forged Low Temperature Carbon Steel
MO = ASTM A414, M35.................................................. = Cast NI Cu (Monel***)
SPL = Special (Customer to specify)
Rev: 032307.01
1 = 150
2 = 125
3 = 300
6 = 600
8 = 800
9 = 900
15 = 1500
16 = 1690
25 = 2500
26 = 2680
45 = 4500
End Connections
F = Flanged
J = RTJ
S = Socket Weld
T = Threaded
W = Butt Weld
X = Threaded x Socket Weld
Trim Material
Type
API Trim =
1 = CR13....................................... 1, 4, 8A
2 = CR13/HF**..................................8
3 = CR13/FHF**...............................5
4 = 316...............................................10
4/2 = 316/HF**...................................12
4/3 = 316/FHF**.................................16
5 = NI Cu (Monel***)........................9
5/2 = Monel/HF**................................11
6 = Alloy 20........................................13
7 = Bronze.........................................N/A
A7 = Aluminum Bronze......................N/A
8 = Iron...............................................N/A
9 = Special (Customer to Specify)
Suffix Letters
BP = By Pass
BS = Bellows Seal
CL = Chlorine Service
CR = Cryogenic Service
CW = Chain Wheel
EB = Extended Bonnet
FP = Full Port
FS = Fire Safe
GI = Grease Injection
GO = Gear Operated
HB = Horizontal Ball Check
HP = Horizontal Piston Check
HO = Hydraulic Operator
LD = Locking Device
LL = Locking Loop
LV = Live Load Packing
MO = Motor Operated
NC = Material to NACE MR-01-75
OL = Outside Weight & Lever
OX = Oxygen Service
PO = Pneumatic Operator
PS = Pressure Seal Bonnet
PT = PTFE Seats
QS = QuadroSphere
RP = Regular Port
SC = Stop Check
SL = Spring Loading
SPL = Special (Customer to specify)
TD = Tilting Disc Check
TF = Teflon* Insert
TM = Trunnion Mounted
VP = Vertical Ball Check
VL = Vertical Lift Check
VP = V-Port Disc
VT = Viton* Insert
WB = Welded Bonnet
* = Viton and Teflon are registered
trademarks of DuPont Company
**HF= Hardfaced - AWS 5.13 Class COCRA
*** = Monel is a registered trademark of
International Nickel Company
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Body/Bonnet Materials
Newco cast steel valves are available in stock in a wide range of body/bonnet materials and optional trim materials. Listed below are some
of the more popular materials. Additional materials are available. Please contact Newmans or your local distributor for details.
Newco
Material
Designation
Common
Description
ASTM
Specs.
Body/Bonnet
Material Service Limitations*
Non-corrosive service water, oil, & gases at temperatures between -20º F & +800º F
CB
Carbon Steel
A216
LCC
Low Temp Carbon
A352
Low temperature service between -50º F & +650º F
WC6
1.25% Chrome & .5% Moly
A217
Non-corrosive service water, oil, & gases at temperatures between -20º F & +1100º F
WC9
2.25% Chrome & 1% Moly
A217
Non-corrosive service water, oil, & gases at temperatures between -20º F & +1100º F
C5
5% Chrome & .5% Moly
A217
Corrosive, non-corrosive, or erosive service at temperatures between -20º F & +1200º F
C12
9% Chrome & 1% Moly
A217
Corrosive, non-corrosive, or erosive service at temperatures between -20º F & +1200º F
C12A
9% Chrome, 1% Moly, & V
A217
Corrosive, non-corrosive, or erosive service at temperatures between -20º F & +1200º F
C8M
Cast 316
A351
Corrosive, cryogenic or high temperature service between -450º F & +1200º F
A20
Alloy 20
A351
Corrosive service at temperatures between -20º F & +300º F
* Limitations are per 2004 Edition of ASME B16.34.
Trim Materials
The following are Newco’s standard trim designations.
Newco
Trim
Number
Common
Name
API 600
Trim No.
Seat Ring
Facing (1)
Wedge
Other
or Disc Stem
Trim
Facing (1)
Parts (2)
1
13 Chrome
1
CR 13
CR 13
CR 13
CR 13
Non-corrosive applications.
Steam, gas, & general service to 700º F.
Oil & oil vapor to 900º F
2
Half Stellite
8
HF
CR 13
CR 13
CR 13
Steam, gas, & general service to 1000º F.
Standard trim for gate valves
3
Full Stellite
5
HF
HF
CR 13
CR 13
Premium trim service to 1200º F. Excellent for high
pressure water and steam service
4
316
10
316
316
316
316
Corrosive services to 850º F. Low temperature
service standard for 316 SS valves
4/2
316/Half Stellite
12
HF
316
316
316
4/3
316/Full Stellite
16
HF
HF
316
316
5
Monel
9
NiCu
NiCu
NiCu
NiCu
5/2
Monel/Half Stellite
11
HF
NiCu
NiCu
NiCu
5/3
Monel/Full Stellite
-
HF
HF
NiCu
NiCu
6
Alloy 20
13
A20
A20
A20
A20
Corrosive services to 300º F
7
Bronze
-
BRZ
BRZ
BRZ
BRZ
Water, gas, or low pressure steam to 450º F
A7
Aluminum Bronze
-
AL BRZ
AL BRZ
AL BRZ
AL BRZ
8
Iron
-
Iron
Iron
STL
Iron or STL
X
Special
Special
Special
Special
Special
Special
Service Limitations
Corrosive services to 750º F
Customer to specify
(1) Facing is defined as the seating surface of a seat ring and wedge/disc
(2) Other trim parts are defined as small internal parts that are normally in contact with the service fluid. This includes the stem, backseat bushing in gate and globe valves
and the swing check disc nut
Newco Features and Benefits
• Certifications
• Extensive Engineering Capabilities
• International Organization for Standardization (ISO)
• Excellent Customer Service
• Traceability
• Warranty
• Fugitive Emmisions Tested
• Onsite Non-destructive Testing
• API-598 Tested
• Field Services for Start-up
• Major End-user Approved
• Inhouse Automation Capabilities
• Multiple North American Locations
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Pressure Temperature Ratings - ASME B16.34 - 2004
Class 150
Temperature °F
-20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
WCB*
285
260
230
200
170
140
125
110
95
80
65
50
35
20
-
LCC
290
260
230
200
170
140
125
110
95
80
65
50
35
20
-
Temperature °F
-20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
WCB*
1480
1360
1310
1265
1205
1135
1100
1060
1015
825
640
460
275
170
-
LCC
1500
1500
1455
1405
1330
1210
1175
1110
1015
825
640
445
275
170
-
Temperature °F
-20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
WCB*
3705
3395
3270
3170
3015
2840
2745
2665
2535
2055
1595
1150
685
430
-
LCC
3750
3750
3640
3520
3325
3025
2940
2775
2535
2055
1595
1115
685
430
-
WC6
290
260
230
200
170
140
125
110
95
80
65
50
35
20
20**
20**
-
Class 300
WC9
290
260
230
200
170
140
125
110
95
80
65
50
35
20
20**
20**
-
C5
290
260
230
200
170
140
125
110
95
80
65
50
35
20
20**
20**
20**
20**
C12
290
260
230
200
170
140
125
110
95
80
65
50
35
20
20**
20**
20**
20**
C12A
290
260
230
200
170
140
125
110
95
80
65
50
35
20
20
20
20
20
Temperature °F
-20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
WCB*
740
680
655
635
605
570
550
530
505
410
320
230
135
85
-
LCC
750
750
730
705
665
605
590
555
505
410
320
225
135
85
-
WC9
1500
1500
1455
1410
1330
1210
1175
1135
1065
1015
975
900
755
535
350
220
135
80
C5
1500
1500
1455
1410
1330
1210
1175
1135
1065
1015
975
745
550
400
290
200
125
70
C12
1500
1500
1455
1410
1330
1210
1175
1135
1065
1015
975
900
755
505
345
225
150
105
C12A
1500
1500
1455
1410
1330
1210
1175
1135
1065
1015
975
900
775
725
720
605
445
290
Temperature °F
-20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
WCB*
2220
2035
1965
1900
1810
1705
1650
1590
1520
1235
955
690
410
255
-
LCC
2250
2250
2185
2110
1995
1815
1765
1665
1520
1235
955
670
410
255
-
C5
3750
3750
3640
3530
3325
3025
2940
2840
2660
2540
2435
1870
1370
995
720
495
310
170
C12
3750
3750
3640
3530
3325
3025
2940
2840
2660
2540
2435
2245
1885
1270
855
565
375
255
C12A
3750
3750
3640
3530
3325
3025
2940
2840
2660
2540
2435
2245
1930
1820
1800
1510
1115
720
Temperature °F
-20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
WCB*
6170
5655
5450
5280
5025
4730
4575
4425
4230
3430
2655
1915
1145
715
-
LCC
6250
6250
6070
5865
5540
5040
4905
4630
4230
3430
2655
1855
1145
715
-
Class 600
WC6
1500
1500
1445
1385
1330
1210
1175
1135
1065
1015
975
900
640
430
290
190
130
80
WC9
750
750
730
705
665
605
590
570
530
500
485
450
385
265
175
110
70
40
C5
750
750
730
705
665
605
590
570
530
510
485
375
275
200
145
100
60
35
C12
750
750
730
705
665
605
590
570
530
510
485
450
375
255
170
115
75
50
C12A
750
750
730
705
665
605
590
570
530
510
485
450
385
365
360
300
225
145
WC9
2250
2250
2185
2115
1995
1815
1765
1705
1595
1525
1460
1350
1160
805
525
330
205
125
C5
2250
2250
2185
2115
1995
1815
1765
1705
1595
1525
1460
1120
825
595
430
300
185
105
C12
2250
2250
2185
2115
1995
1815
1765
1705
1595
1525
1460
1350
1130
760
515
340
225
155
C12A
2250
2250
2185
2115
1995
1815
1765
1705
1595
1525
1460
1350
1160
1090
1080
905
670
430
C5
6250
6250
6070
5880
5540
5040
4905
4730
4430
4230
4060
3115
2285
1655
1200
830
515
285
C12
6250
6250
6070
5880
5540
5040
4905
4730
4430
4230
4060
3745
3145
2115
1430
945
630
430
C12A
6250
6250
6070
5880
5540
5040
4905
4730
4430
4230
4060
3745
3220
3030
3000
2515
1855
1200
Class 900
Class 1500
WC6
3750
3750
3610
3465
3325
3025
2940
2840
2660
2540
2435
2245
1595
1080
720
480
325
205
WC6
750
750
720
695
665
605
590
570
530
510
485
450
320
215
145
95
65
40
WC9
3750
3750
3640
3530
3325
3025
2940
2840
2660
2540
2435
2245
1930
1335
875
550
345
205
WC6
2250
2250
2165
2080
1995
1815
1765
1705
1595
1525
1460
1350
955
650
430
290
195
125
Class 2500
WC6
6250
6250
6015
5775
5540
5040
4905
4730
4430
4230
4060
3745
2655
1800
1200
800
545
345
WC9
6250
6250
6070
5880
5540
5040
4905
4730
4430
4230
4060
3745
3220
2230
1455
915
570
345
* Not recommended for prolonged use above 800° F. ** For weld end valves only. Flanged end ratings terminate at 1000° F. Note: Packing, gasket, or bolting may limit temperature. Please advise service
temperature if above 1000° F. Ratings from ASME B16.34 standard class valves. Special class weld end valves to ASME B16.34 are available on special order.
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Flange Dimensions - ASME B16.5
Flange Dimensions in Inches
Class
Class 150 & 300
1/16”
C
1/4”
C
3
0
0
A
D
E
B
Class 600 thru 2500
6
0
0
A
D
E
B
Standards: NPS 24 and smaller in all classes conform to ASME
B16.5. NPS 30 and larger conform to ASME B16.47 (Series A).
Facing: End flanges are regularly furnished with a raised face
having a serrated finish per MSS SP-6. The thickness of the flange
dimension (C) includes the raised face for Class 150 and 300. For
Class 600 thru 2500, the flange dimension (C) does not include
the 1/4” raised face.
9
0
0
Bolt Holes: Bolt holes are 1/8” larger than the bolt diameter. Bolt
holes are drilled to straddle the center line.
Flange Dimensions in Inches
Class
Size
A
B
C
D
E
1
5
0
2
2.5
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
48
2.00
2.50
3.00
4.00
5.00
6.00
8.00
10.00
12.00
13.25
15.25
17.25
19.25
23.25
29.25
35.06
40.87
46.00
6.00
7.00
7.50
9.00
10.00
11.00
13.50
16.00
19.00
21.00
23.50
25.00
27.50
32.00
38.75
46.00
53.00
59.50
0.75
0.88
0.94
0.94
0.94
1.00
1.12
1.19
1.25
1.38
1.44
1.56
1.69
1.88
2.94
3.56
3.81
4.25
3.62
4.12
5.00
6.19
7.31
8.50
10.62
12.75
15.00
16.25
18.50
21.00
23.00
27.25
33.75
40.25
47.00
53.50
4.75
5.50
6.00
7.50
8.50
9.50
11.75
14.25
17.00
18.75
21.25
22.75
25.00
29.50
36.00
42.75
49.50
56.00
Stud Bolts
No.
Dia.
8
0.63
8
0.63
8
0.63
8
0.63
8
0.75
12
0.75
12
0.75
16
0.88
16
0.88
20
1.00
20
1.00
24
1.13
24
1.13
24
1.25
28
1.25
32
1.50
36
1.50
44
1.50
1
5
0
0
2
5
0
0
Rev: 032307.01
Size
A
B
C
D
E
2
2.5
3
4
5
6
8
10
12
14
16
18
20
24
30
36
2
2.5
3
4
5
6
8
10
12
14
16
18
20
24
30
36
3
4
5
6
8
10
12
14
16
18
20
24
2
2.5
3
4
5
6
8
10
12
14
16
18
20
24
2
2.5
3
4
5
6
8
10
12
2.00
2.50
3.00
4.00
5.00
6.00
8.00
10.00
12.00
13.25
15.25
17.00
19.00
23.00
29.00
34.50
2.00
2.50
3.00
4.00
5.00
6.00
7.88
9.75
11.75
12.88
14.75
16.50
18.25
22.00
27.37
32.87
2.88
3.88
4.75
5.75
7.50
9.38
11.12
12.25
14.00
15.75
17.50
21.00
1.88
2.25
2.75
3.62
4.38
5.38
7.00
8.75
10.38
11.38
13.00
14.62
16.38
19.62
1.50
1.88
2.25
2.88
3.62
4.38
5.75
7.25
8.62
6.50
7.50
8.25
10.00
11.00
12.50
15.00
17.50
20.50
23.00
25.50
28.00
30.50
36.00
43.00
50.00
6.50
7.50
8.25
10.75
13.00
14.00
16.50
20.00
22.00
23.75
27.00
29.25
32.00
37.00
44.50
51.75
9.50
11.50
13.75
15.00
18.50
21.50
24.00
25.25
27.75
31.00
33.75
41.00
8.50
9.62
10.50
12.25
14.75
15.50
19.00
23.00
26.50
29.50
32.50
36.00
38.75
46.00
9.25
10.50
12.00
14.00
16.50
19.00
21.75
26.50
30.00
0.88
1.00
1.12
1.25
1.38
1.44
1.62
1.88
2.00
2.12
2.25
2.38
2.50
2.75
3.62
4.12
1.00
1.12
1.25
1.50
1.75
1.88
2.19
2.50
2.62
2.75
3.00
3.25
3.50
4.00
4.50
4.88
1.50
1.75
2.00
2.19
2.50
2.75
3.12
3.38
3.50
4.00
4.25
5.50
1.50
1.62
1.88
2.12
2.88
3.25
3.62
4.25
4.88
5.25
5.75
6.38
7.00
8.00
2.00
2.25
2.62
3.00
3.62
4.25
5.00
6.50
7.25
3.62
4.12
5.00
6.19
7.31
8.50
10.62
12.75
15.00
16.25
18.50
21.00
23.00
27.25
33.75
40.25
3.62
4.12
5.00
6.19
7.31
8.50
10.62
12.75
15.00
16.25
18.50
21.00
23.00
27.25
33.75
40.25
5.00
6.19
7.31
8.50
10.62
12.75
15.00
16.25
18.50
21.00
23.00
27.25
3.62
4.12
5.00
6.19
7.31
8.50
10.62
12.75
15.00
16.25
18.50
21.00
23.00
27.25
3.62
4.12
5.00
6.19
7.31
8.50
10.62
12.75
15.00
5.00
5.88
6.62
7.88
9.25
10.62
13.00
15.25
17.75
20.25
22.50
24.75
27.00
32.00
39.25
46.00
5.00
5.88
6.62
8.50
10.50
11.50
13.75
17.00
19.25
20.75
23.75
25.75
28.50
33.00
40.25
47.00
7.500
9.25
11.00
12.50
15.50
18.50
21.00
22.00
24.25
27.00
29.50
35.50
6.50
7.50
8.00
9.50
11.50
12.50
15.50
19.00
22.50
25.00
27.75
30.50
32.75
39.00
6.75
7.75
9.00
10.75
12.75
14.50
17.25
21.75
24.38
Stud Bolts
No.
Dia.
8
0.63
8
0.75
8
0.75
8
0.75
8
0.75
12
0.75
12
0.88
16
1.00
16
1.13
20
1.13
20
1.25
24
1.25
24
1.25
24
1.5
28
1.75
32
2.00
8
0.63
8
0.75
8
0.75
8
0.88
8
1.00
12
1.00
12
1.13
16
1.25
20
1.25
20
1.38
20
1.5
20
1.63
24
1.63
24
1.88
28
2.00
28
2.50
8
0.88
8
1.13
8
1.25
12
1.13
12
1.38
16
1.38
20
1.38
20
1.50
20
1.63
20
1.88
20
2.00
20
2.50
8
0.88
8
1.00
8
1.13
8
1.25
8
1.50
12
1.38
12
1.63
12
1.88
16
2.00
16
2.25
16
2.50
16
2.75
16
3.00
16
3.50
8
1.00
8
1.13
8
1.25
8
1.50
8
1.75
8
2.00
12
2.00
12
2.50
12
2.75
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Auxiliary Connection Locations
(Bypasses, Drains, etc.)
Please refer to ASME B16.34 for exact auxiliary connection locations, sizes, and threading information.
Each letter in the illustration(s) below identify the possible hole locations for auxiliary connection(s). These illustrations are for reference
purposes only.
Unless specified otherwise, auxiliary connection hole sizes shall be drilled and tapped as follows:
- 2” thru 4” utilizes a .50” hole
- 5” thru 8” utilizes a .75” hole
- 10” and larger utilizes a 1” hole
Gate Valves
Check Valves
Globe Valves
Angle Valves
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Products & Services
VALVES
NEWCO
• Full Line of Gate, Globe, and Check Valves in Forged Steel, and Cast Steel
• Trunnion Mounted Ball Valves
• Floating Ball Valves
• QuadroSphere® Trunnion Mounted Ball Valves
OIC
• Gate, Globe, and Check Valves in Stainless Steel
COOPER
• Gate, Globe, and Check Valves Flanged, Threaded, and Socket Weld in Cast and Forged Exotic Alloy, and Stainless Steel
• Flanged and 3-Piece Ball Valves in Exotic Alloy
Manual Operations
• Worm Gears, Spur Gears, Bevel Gears, and Reach Rods
• Table Stands, Extension Systems, and Brackets
• Field and Shop Installation Services
Valve Modification
• By Passes, Bore Changes, Mounting Plates, Stem Extensions, Limit Switches, Trim Changes, etc. (Inquire within)
AUTOMATION
Valve & Damper Actuation
• Electric, Hydraulic, and Pneumatic Automation
• Multi-turn, Quarter-turn, and Linear
• New Applications and Field Retrofits
• Capabilities and Support for all Actuators including: Limitorque, Rotork, Auma, EIM, Bettis, Automax, Fisher, Miller, and Hanna
Automation Site Services
• Experienced Field Technicians
• Actuator Installation, Setting, Calibration, Start-up
• Commissioning and Repair Services
• Automation and Control Surveys
Automation Shop Services
• Experienced Shop Technicians
• Complete Automated Valve Assemblies
• Special Wiring Diagrams and Control Schematic
• Shop Acuator Repairs on Limitorque, Rotork, Auma, and EIM
Controls & Digital Communications
• Pneumatic and Hydraulic Services
• Solenoid and Speed Control Valves; Limit Switches
• Two-wire Integration, Field Bus, ModBus, ProfiBus, DeviceNet, EtherNet, Serial Communications, Network Control Systems
Specialists in Electric and Pneumatic Actuation
10
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Cast Steel Bolted Bonnet Gate Valves
Sizes: 2” thru 48” • Pressure Class: 150 thru 1500
11
Rev: 032307.01
Manufactured by Newmans™
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Typical Newco Cast Steel Bolted
Bonnet Gate Valve Expanded
View
1. Body: Newco cast steel bodies provide low resistance flow
and optimum strength and performance.
2. Yoke & Bonnet: Newco bonnet assemblies are built to the
same standards as the bodies. Larger size gate valves utilize a
multi-piece bonnet design.
3. Grease Fitting: The grease fitting allows for easy stem
17
18
lubrication.
4. Stem: The stem is precision machined and inserts into the
horizontal channel in the disc.
16
5. Wedge: Newmans 1-piece flex wedge is machined to the
tightest tolerances to ensure trouble free shutoff and cycling.
6. Back Seat Bushing: The back seat, when engaged with
15
the stem head, provides a stable shutoff to the stuffing box
which isolates the packing from flow exposure.
8
7. Gland: Compresses the packing to create a stem seal above
7
8. Gland Flange: Applies pressure to the gland for accurate
12
the back seat, between the bonnet and stem.
14
packing adjustments.
9. & 10. Gland Bolts & Nuts: The gland bolt and nut allows
for easy adjustments for packing compression.
23
11. Gland Bolt Pin: The gland bolt pin secures the gland
3
bolts to the yoke & bonnet.
10
2
12. Packing: The packing creates a seal above the back seat,
9
between the bonnet and stem.
13
13. Stuffing Box: The stuffing box contains the packing.
14. Stem Nut: The stem nut provides a precision guide for
11
proper stem alignment.
15. Yoke Bushing: The retaining nut secures the stem nut
21
16. Handwheel: The handwheel cycles the valve.
17. Handwheel Nut: The handwheel nut secures the
4
to the bonnet assembly.
handwheel to the bonnet assembly.
6
19
18. Set Screw: The set screw prevents handwheel nut
loosening.
20
19. Bonnet Gasket: The bonnet gasket creates a leakproof
seal between the bonnet and body.
20. & 21. Bonnet Studs & Nuts: The bonnet studs and
5
21
nuts secure the bonnet to the body.
22. Seat Rings: To ensure a stable shutoff, seat rings are
aligned and seal-welded into the valve, then precision ground for
optimal seating.
1
23. Spacer Ring: Assists the packing rings in creating a seal
above the back seat, between the bonnet and stem.
22
12
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Gates
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class 150 - Sizes: 2” thru 48”
Pressure Class Range: 150 thru 1500
C
B
(open)
Split-yoke and
vertical handwheel
on sizes 14” and larger.
A-RF & RTJ
A-BW
Component
Body
Seat Rings
CB2
Wedge 2” - 3”
ASTM A276-410
Wedge 4” & larger
Stem
Yoke & Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
2
50
7.0
178
8.5
216
14.8
376
8.0
203
46
21
40
18
CB3
ASTM A216-WCB
ASTM A105/HF
ASTM A216WCB/HF
Typical Bill of Materials (See page 5 for available materials.)
CB4/2
ASTM A351CF8M/A276-316
ASTM A216-WCB
ASTM A276-316
w/13% Chrome
ASTM A182-F6a
ASTM A182-316
ASTM A216-WCB
Multilayered Corrugated 316 w/Graphite
ASTM A194-2H
ASTM A194-2HM
ASTM A193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite w/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
2.5
65
7.5
191
9.5
241
17.1
434
8.0
203
56
25
46
21
3
80
8.0
203
11.1
282
18.2
462
8.0
203
71
32
58
26
4
100
9.0
229
12.0
305
22.6
574
10.0
254
111
50
91
41
5
125
10.0
254
15.0
381
28.1
714
13.0
330
163
74
152
69
6
150
10.5
267
15.9
404
33.2
843
14.0
357
196
89
180
82
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Gland Flange
Gland Bolt Pins
Gland Bolts
Gland Nuts
Nameplate
Nameplate Rivets
Grease Fitting
Stem Nut
Yoke Bushing
Handwheel
Handwheel Nut
Set Screw
Spacer Ring
-
8
200
11.5
292
16.5
419
38.9
988
16.0
406
289
131
259
118
Class 150
10
250
13.0
330
18.0
457
46.4
1179
18.0
457
449
204
425
193
12
300
14.0
356
19.8
503
54.6
1387
20.0
508
639
290
584
265
13
14
350
15.0
381
22.5
572
63.5
1613
18.1
460
860
391
811
369
16
400
16.0
406
24.0
610
72.4
1839
18.1
460
1190
541
1146
521
CB2
18
450
17.0
432
26.0
660
79.2
2012
18.1
460
1389
631
1349
613
CB3
CB4/2
ASTM A216-WCB
ASTM A36
ASTM A307-B
ASTM A194-2H
Stainless Steel 304
Stainless Steel - Commercial
Carbon Steel - Commercial
ASTM A439-D2
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A193-B6
N/A
-
20
500
18.0
457
28.0
711
86.0
2184
18.1
460
1786
812
1720
782
24
600
20.0
508
32.0
813
100.8
2560
21.3
541
2602
1183
2534
1152
30
750
24.0
610
24.0
610
125.1
3178
24.0
610
4466
2030
4037
1835
36
900
28.0
711
28.0
711
153.2
3891
31.8
808
4850
1193
4385
1993
42
1050
31.0
813
43.0
1092
174.4
4430
31.5
800
10134
4600
10198
4625
48
1200
34.0
864
46.0
1168
217.5
5525
35.4
900
15677
8500
15545
8550
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Gates
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class 300 - Sizes: 2” thru 36”
Pressure Class Range: 150 thru 1500
C
B
(open)
Split-yoke and
vertical handwheel
on sizes 14” and larger.
A-RF
Component
Body
Seat Rings
Wedge 2” - 3”
Wedge 4” & larger
Stem
Yoke & Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
2
50
8.5
216
8.5
216
17.2
437
8.0
203
64
29
51
23
A-BW
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105/HF
ASTM A216ASTM A351ASTM A276-410
WCB/HF
CF8M/A276-316
ASTM A216-WCB ASTM A216-WCB/
ASTM A276-316
w/13% Chrome
HF
ASTM A182-F6a
ASTM A182-316
ASTM A216-WCB
Spiral Wound 316 Stainless Steel/Graphite
ASTM A194-2H
ASTM A194-2HM
ASTM A193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite w/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
2.5
65
9.5
241
9.5
241
19.1
485
10.0
254
88
40
68
31
3
80
11.1
282
11.1
282
20.0
508
10.0
254
112
51
86
39
4
100
12.0
305
12.0
305
24.0
610
12.0
305
175
80
154
70
5
125
15.0
381
15.0
381
29.6
752
15.0
381
258
117
207
94
6
150
15.9
404
15.9
404
33.0
838
16.0
406
340
155
269
122
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Gland Flange
Gland Bolt Pins
Gland Bolts
Gland Nuts
Nameplate
Nameplate Rivets
Grease Fitting
Stem Nut
Yoke Bushing
Handwheel
Handwheel Nut
Set Screw
Spacer Ring
-
Class 300
8
200
16.5
419
16.5
419
41.1
1044
18.0
457
542
246
430
195
10
250
18.0
457
18.0
457
49.3
1252
20.0
508
816
371
620
282
14
12
300
19.75
502
19.75
502
57.0
1448
22.0
559
1072
487
871
396
14
350
30.0
762
30.0
762
67.0
1702
18.1
460
1764
802
1323
601
CB2
16
400
33.0
838
33.0
838
73.1
1857
18.1
460
2183
992
1830
832
CB3
CB4/2
ASTM A216-WCB
ASTM A36
ASTM A307-B
ASTM A194-2H
Stainless Steel 304
Stainless Steel - Commercial
Carbon Steel - Commercial
ASTM A439-D2
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A193-B6
ASTM A276-410
-
18
450
36.0
914
36.0
914
82.2
2088
21.3
451
2867
1303
2381
1082
20
500
39.0
991
39.0
991
95.5
2426
21.3
541
3682
1674
3109
1413
24
600
45.0
1143
45.0
1143
104.7
2659
24.0
610
5645
2566
4873
2215
30
750
55.0
1397
55.0
1397
136.3
3462
31.9
810
9702
4410
8350
3795
36
900
68.0
1727
68.0
1727
169.8
4312
30.0
760
15104
6850
11003
4990
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Gates
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 600 - Sizes: 2” thru 24”
Pressure Class Range: 150 thru 1500
C
B
(open)
Split-yoke and
vertical handwheel
on sizes 14” and larger.
A-RF & RTJ
Component
Body
Seat Rings
Wedge 2” - 3”
Wedge 4” & larger
Stem
Yoke & Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
Size
A-RF
A-BW
A-RTJ
B
C
RF-RTJ
Wt.
BW
Wt.
nps
dn
in
mm
in
mm
in
mm
in
mm
in
mm
lbs
kg
lbs
kg
2
50
11.5
292
11.5
292
11.62
295
18.3
465
10.0
254
97
44
79
36
A-BW
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105/HF
ASTM A216ASTM A351ASTM A276-410
WCB/HF
CF8M/A276-316
ASTM A216-WCB ASTM A216-WCB/
ASTM A276-316
w/13% Chrome
HF
ASTM A182-F6a
ASTM A182-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM A193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite w/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
2.5
65
13.0
330
13.0
330
13.12
333
19.9
505
10.0
254
132
60
120
55
3
80
14.0
356
14.0
356
14.12
359
21.7
551
12.0
305
176
80
152
69
4
100
17.0
432
17.0
432
17.12
435
26.9
683
14.0
356
320
145
270
123
5
125
20.0
508
20.0
508
31.6
803
18.0
457
520
236
430
195
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Gland Flange
Gland Bolt Pins
Gland Bolts
Gland Nuts
Nameplate
Nameplate Rivets
Grease Fitting
Stem Nut
Yoke Bushing
Handwheel
Handwheel Nut
Set Screw
Spacer Ring
-
Class 600
6
150
22.0
559
22.0
559
22.12
562
36.5
927
20.0
508
680
309
580
264
8
200
26.0
660
26.0
660
26.12
664
44.0
1118
24.0
610
1150
523
1020
464
15
10
250
31.0
787
31.0
787
31.12
791
52.8
1341
27.0
686
1715
780
1430
650
12
300
33.0
838
33.0
838
33.12
841
61.4
1560
27.0
686
2440
1109
1950
886
CB2
14
350
35.0
889
35.0
889
35.12
892
64.8
1646
24.0
610
3150
1432
2695
1225
CB3
CB4/2
ASTM A216-WCB
ASTM A36
ASTM A307-B
ASTM A194-2H
Stainless Steel 304
Stainless Steel - Commercial
Carbon Steel - Commercial
ASTM A439-D2
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A193-B6
ASTM A276-410
16
400
39.0
991
39.0
991
39.12
994
71.7
1821
24.0
610
4415
2007
3800
1727
18
450
43.0
1092
43.0
1092
43.12
1095
79.3
2014
24.0
610
5010
2277
5010
2277
20
500
47.0
1194
47.0
1194
47.25
1200
104.8
2662
31.5
800
6853
3108
5640
2558
24
600
55.0
1397
55.0
1397
55.38
1406
116.9
2970
35.4
900
10337
4688
8595
3898
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Gates
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 900 - Sizes: 2” thru 18”
Pressure Class Range: 150 thru 1500
C
Split-yoke and
vertical handwheel
on sizes 14” and larger.
B
(open)
A-RF
Component
Body
Seat Rings
Wedge 2” - 3”
Wedge 4” & larger
Stem
Yoke & Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
nps
dn
in
A-RF
mm
in
A-BW
mm
in
A-RTJ
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
Size
2
50
14.5
368
14.5
368
14.62
371
21.7
551
12.0
305
135
61
125
57
A-BW
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105/HF
ASTM A216ASTM A351ASTM A276-410
WCB/HF
CF8M/A276-316
ASTM A216-WCB ASTM A216-WCB/
ASTM A276-316
w/13% Chrome
HF
ASTM A182-F6a
ASTM A182-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM A193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite w/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
2.5
65
16.5
419
16.5
419
16.62
422
26.0
660
15.0
381
175
385
155
70
3
75
15.0
381
15.0
381
15.12
384
23.7
602
14.0
356
255
116
213
97
4
100
18.0
457
18.0
457
18.12
460
27.6
701
16.0
406
453
206
396
180
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Gland Flange
Gland Bolt Pins
Gland Bolts
Gland Nuts
Nameplate
Nameplate Rivets
Grease Fitting
Stem Nut
Yoke Bushing
Handwheel
Handwheel Nut
Set Screw
Spacer Ring
-
Class 900
6
150
24.0
610
24.0
610
24.12
612
38.4
975
24.0
610
913
415
807
367
8
200
29.0
737
29.0
737
29.12
740
45.5
1156
27.0
686
1705
775
1465
665
16
10
250
33.0
838
33.0
838
33.12
841
52.6
1336
30.0
762
2387
1085
1724
784
CB2
12
300
38.0
965
38.0
965
38.12
968
59.8
1519
30.0
762
3600
1636
2790
1268
CB3
CB4/2
ASTM A216-WCB
ASTM A36
ASTM A307-B
ASTM A194-2H
Stainless Steel 304
Stainless Steel - Commercial
Carbon Steel - Commercial
ASTM A439-D2
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A193-B6
ASTM A276-410
14
350
40.5
1029
40.5
1029
40.88
1038
74.9
1902
24.0
610
4895
2220
4168
1890
16
400
44.5
1130
44.5
1130
44.88
1140
80.7
2051
24.0
610
6615
3000
5656
2565
18
450
48.0
1219
48.0
1219
48.5
1232
88.8
2256
30.0
762
8533
3870
7277
3300
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Gates
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 1500 - Sizes: 2” thru 18”
Pressure Class Range: 150 thru 1500
C
Split-yoke and
vertical handwheel
on sizes 14” and larger.
B
(open)
A-RF
Component
Body
Seat Rings
Wedge 2” - 3”
Wedge 4” & larger
Stem
Yoke & Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
nps
dn
in
A-RF
mm
in
A-BW
mm
in
A-RTJ
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
Size
2
50
14.5
368
14.5
368
14.62
371
21.7
551
12.0
305
128
58
106
48
A-BW
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105/HF
ASTM A216ASTM A351ASTM A276-410
WCB/HF
CF8M/A276-316
ASTM A216-WCB ASTM A216-WCB/
ASTM A276-316
w/13% Chrome
HF
ASTM A182-F6a
ASTM A182-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM A193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite w/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
2.5
65
16.5
419
16.5
419
16.62
422
26.0
660
15.0
381
163
74
137
62
3
75
18.5
470
18.5
470
18.62
473
28.5
724
16.0
406
209
95
174
79
4
100
21.5
546
21.5
546
21.62
549
32.6
828
18.0
457
423
192
352
160
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Gland Flange
Gland Bolt Pins
Gland Bolts
Gland Nuts
Nameplate
Nameplate Rivets
Grease Fitting
Stem Nut
Yoke Bushing
Handwheel
Handwheel Nut
Set Screw
Spacer Ring
-
Class 1500
6
150
27.8
706
27.8
706
28.0
711
39.3
998
27.0
686
978
445
870
395
8
200
32.75
832
32.75
832
33.13
841
48.1
1223
30.0
762
1625
739
1650
750
17
10
250
39.0
991
39.0
991
39.38
1000
66.5
1688
27.9
710
4412
2001
3541
1606
CB2
12
300
44.5
1130
44.5
1130
45.12
1146
82.3
2090
27.9
710
8414
3816
7080
3211
CB3
CB4/2
ASTM A216-WCB
ASTM A36
ASTM A307-B
ASTM A194-2H
Stainless Steel 304
Stainless Steel - Commercial
Carbon Steel - Commercial
ASTM A439-D2
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A536 (65-45-12)
ASTM A193-B6
ASTM A276-410
14
350
49.5
1257
49.5
1257
50.25
1276
85.1
2162
30.0
762
9074
4115
7056
3200
16
400
54.5
1384
54.5
1384
55.38
1406
97.9
2486
30.0
762
13324
6950
13230
6000
18
450
60.5
1536
60.5
1536
61.38
1559
108.7
2762
30.0
762
19845
9000
17067
7740
www.NewmansValve.com
Toll Free: 800.231.3505
Valveuable
Qualities...
• Reliable
• Excellent Warranty
• Leading Manufacturer
• Integrity
• Availability
• Built to Last
• Large Inventory
• Expertise
• Standardized Tests
• Optimum Performance
• Uncompromized Construction
• Recognized Name
• Customer Service
• Exceptional Quality
...but we really don’t like to brag.
Newmans manufactures a complete line of Newco and OIC valve
products in a full range of sizes, classes, and materials. The new addition
of Cooper’s complete product line will now allow us to better serve your
severe service needs.
Newmans has been supplying quality valves to the world’s
hydrocarbon, pulp & paper, marine, power, and general industries for
more than 60 years. Newmans manufactures and inventories gate,
globe, check, ball, and specialty valves in sizes from 1/2” thru 60” in
diameter and in pressure classes from 125 thru 4500 lbs. in most alloys.
Newmans ’ world-wide production facilities are certified to the
requirements of the ISO 9001:2000 Standard and are compliant to the
industry standards of API, ASTM and ASME. All Newmans products are
manufactured, inspected, and tested in accordance to the most rigid
quality standards as well as any specific customer requirements.
So, whether it’s exotic alloys for corrosive applications or metal seated
ball valves for severe service applications, Newmans is “The Reliable
Source” for all your valve needs.
Toll Free: 800.231.3505
www.NewmansValve.com
•
•
•
•
•
Engineered solutions
Complete alloy coverage
Ready-to-ship inventories
Competitive factory lead times
Sizes: 1/2” thru 60” & Classes: 125 thru 4500
Corporate: 1300 Gazin - Houston, TX 77020 • Phone: 800.231.3505 • Manufacturer of Newco, OIC, and Cooper valves: Gates • Globes • Checks • Balls • Pressure Seals • Specialties
Cast Steel Bolted Bonnet Globe Valves
Sizes: 2” thru 14” • Pressure Class: 150 thru 1500
19
Rev: 032307.01
Manufactured by Newmans™
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Typical Newco Cast Steel Bolted
Bonnet Globe Valve Expanded
View
18
19
1. Body: Newco cast steel bodies provide low resistance flow
and optimum strength and performance.
17
2. Bonnet: Newco bonnet assemblies are built to the same
standards as the bodies.
3. Back Seat Bushing: The back seat, when engaged with
the stem head, provides a stable shutoff to the stuffing box
which isolates the packing from flow exposure.
4. Stem: The stem inserts vertically into the disc.
5. Lock Groove: The lock groove receives the split lock ring
10
9
16
14
which allows the disc nut to lift the disc during cycling.
6. Split Ring: The split ring allows the disc nut to lift the disc
during cycling.
7. Disc: Newmans plug type disc is machined to the tightest
25
tolerances to ensure trouble free shutoff and cycling.
2
8. Disc Nut: The disc nut, in conjunction with the split lock
15
9. Gland: Compresses the packing to create a stem seal above
13
ring, secures the disc to the stem.
the back seat, between the bonnet and stem.
12
11
22
10. Gland Flange: Applies pressure to the gland for
accurate packing compression.
11. & 12. Gland Bolts & Nuts: The gland bolt and nut
allows for easy adjustments for packing compression.
13. Gland Bolt Pin: The gland bolt pin secures the gland
bolts to the yoke & bonnet.
3
20
14. Packing: The packing creates a seal above the back seat,
21
between the bonnet and stem.
15. Stuffing Box: The stuffing box contains the packing.
16. Stem Nut: The stem nut provides a precision guide for
24
proper stem alignment.
17. Handwheel: The handwheel cycles the valve.
18. Handwheel Nut: The handwheel nut secures the
22
handwheel to the bonnet assembly.
1
19. Handwheel Washer: The washer helps to prevent
4
loosening or distributes pressure evenly.
20. Bonnet Gasket: The bonnet gasket creates a leakproof
seal between the bonnet and body.
21. & 22. Bonnet Studs & Nuts: The bonnet studs and
nuts secure the bonnet to the body.
23
23. Seat Ring: To ensure a stable shutoff, the seat rings is
aligned and seal-welded into the valve, then precision ground for
optimal seating.
5
24. Disc Guide: The disc guides provide a stable track for
8
keeping the disc aligned with the seat during cycling.
25. Spacer Ring: Assists the packing rings in creating a seal
6
above the back seat, between the bonnet and stem.
7
20
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Globes
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 150 - Sizes: 2” thru 14”
Pressure Class Range: 150 thru 1500
C
B
(open)
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
CB2
CB3
ASTM A216-WCB**
Typical Bill of Materials (See page 5 for available materials.)
CB4/2
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Spiral Wound 316 Stainless Steel/Graphite
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
A-BW
2
50
8.0
203
8.0
203
14.9
378
8.0
203
51
23
51
23
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2.5
65
8.5
216
8.5
216
15.8
401
10.0
254
73
33
73
33
3
75
9.5
241
9.5
241
16.6
422
10.0
254
93
42
93
42
4
100
11.5
292
11.5
292
19.9
505
12.0
305
137
62
137
62
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
** ASTM A216-WCB/HF for 2” to 4”.
Rev: 032307.01
CB2
CB3
CB4/2
ASTM A36
ASTM A194-2H
ASTM A194-2HM
ASTM A307-B
ASTM A193-B7M
ASTM A105/HF (6” & larger)
ASTM A276-410
ASTM A666-304
Commercial
ASTM A276-410
ASTM A276-316
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 150
5
125
14.0
356
14.0
356
21.8
554
14.0
356
192
87
192
87
21
6
150
16.0
406
16.0
406
22.4
569
16.0
406
243
110
243
110
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
N/A
8
200
19.5
495
19.5
495
26.5
673
18.0
457
419
190
419
190
10
250
24.5
622
24.5
622
30.6
777
22.0
610
507
276
507
276
12
300
27.5
699
27.5
699
34.8
884
24.0
610
948
476
948
476
14
350
31.0
787
31.0
787
41.4
1052
27.0
610
1276
625
1276
625
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Globes
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598 & API RP591
Recommended Spare Parts**
Styles: CB2, CB3, & CB4/2
Class: 300 - Sizes: 2” thru 14”
Pressure Class Range: 150 thru 1500
C
B
(open)
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
CB2
CB3
ASTM A216-WCB**
Typical Bill of Materials (See page 5 for available materials.)
CB4/2
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Spiral Wound 316 Stainless Steel/Graphite
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
A-BW
2
50
10.5
267
10.5
267
16.9
429
10.0
254
75.0
34
55
25
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2.5
65
11.5
292
11.5
292
17.8
452
10.0
254
100.0
45
79
36
3
75
12.5
318
12.5
318
19.2
488
12.0
305
130.0
59
101
46
4
100
14.0
357
14.0
357
23.0
584
14.0
356
203.0
92
163
74
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
** ASTM A216-WCB/HF for 2” to 4”.
Rev: 032307.01
CB2
CB3
ASTM A36
ASTM A194-2H
ASTM A307-B
ASTM A105/HF
ASTM A276-410
ASTM A666-304
Commercial
ASTM A276-410
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 300
5
125
15.75
400
15.75
400
27.4
696
14.0
406
294.0
134
242
110
22
6
150
17.5
445
17.5
445
30.6
777
18.0
457
421.0
191
355
161
CB4/2
ASTM A194-2HM
ASTM A193-B7M
ASTM A276-316
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
ASTM A276-410
8
200
22.0
559
22.0
559
36.2
919
24.0
610
715
325
566
257
10
250
24.5
622
24.5
622
40.8
1036
24.0
610
1015
461
770
350
12
300
28.0
711
28.0
711
47.3
1201
27.0
686
1500
682
1218
554
14
350
33.0
838
33.0
838
54.3
1379
24.0
610
2446
1112
1996
907
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Globes
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598 & API RP591
Recommended Spare Parts**
Styles: CB2, CB3, & CB4/2
Class: 600 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 1500
C
B
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
CB2
Typical Bill of Materials (See page 5 for available materials.)
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2
50
11.5
292
11.5
292
18.4
467
10.0
254
90
41
79
36
2.5
65
13.0
325
13.0
325
20.0
508
10.0
254
130
59
110
50
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB3
ASTM A216-WCB/HF
A-BW
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 600
3
75
14.0
256
14.0
256
24.4
620
14.0
356
170
77
141
64
23
4
100
17.0
435
17.0
435
29.0
737
18.0
457
313
142
256
116
CB2
CB3
ASTM A36
ASTM A194-2H
ASTM A307-B
Integral
ASTM A276-410
ASTM A666-304
Commercial
ASTM A276-410
ASTM A439-D2
CB4/2
ASTM A194-2HM
ASTM A193-B7M
ASTM A276-316
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
ASTM A276-410
6
150
22.0
559
22.0
559
37.9
963
24.0
610
778
354
640
291
8
200
26.0
660
26.0
660
44.7
1135
24.0
610
1245
566
961
437
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Globes
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 900 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 1500
C
B
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB2
A-BW
CB3
ASTM A216-WCB/HF
Typical Bill of Materials (See page 5 for available materials.)
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2
50
14.5
368
14.5
368
22.6
574
12.0
305
198
90
176
80
3
75
15.0
381
15.0
381
26.0
660
16.0
406
335
152
297
135
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
CB2
CB3
ASTM A36
ASTM A194-2H
ASTM A307-B
Integral
ASTM A276-410
ASTM A666-304
Commercial
ASTM A276-410
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 900
4
100
18.0
457
18.0
457
30.6
777
20.0
508
440
200
376
171
24
CB4/2
ASTM A194-2HM
ASTM A193-B7M
ASTM A276-316
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
ASTM A276-410
6
150
24.0
610
24.0
610
39.6
1006
24.0
610
1675
761
1144
520
8
200
29.0
737
29.0
737
60.1
1527
24.0
610
2090
950
1634
743
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Globes
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 1500 - Sizes: 2” thru 6”
Pressure Class Range: 150 thru 1500
C
B
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB2
CB3
ASTM A216-WCB/HF
A-BW
Typical Bill of Materials (See page 5 for available materials.)
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2
50
14.5
368
14.5
368
19.6
498
9.8
249
209
95
143
65
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
3
75
18.5
470
18.5
470
25.6
650
17.7
450
551
250
460
209
CB2
CB3
ASTM A36
ASTM A194-2H
ASTM A307-B
Integral
ASTM A276-410
ASTM A666-304
Commercial
ASTM A276-410
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 1500
25
CB4/2
ASTM A194-2HM
ASTM A193-B7M
ASTM A276-316
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
ASTM A276-410
4
100
21.5
546
21.5
546
30.8
782
19.7
500
959
436
830
377
6
150
27.75
705
27.75
705
36.5
927
25.2
640
1191
541
996
453
www.NewmansValve.com
Toll Free: 800.231.3505
We offer
daily tours.
Manufactured by Newmans™
How many others can say that?
We’re not just smoke
and mirrors like some,
you can actually come
see how we make them!
Newmans manufactures the Newco, OIC, and
Cooper lines of products in a full range of sizes,
classes, and materials. Newmans’ manufacturing
practice is designed to control our foundries and
processing facilities to ensure a quality product,
on-time, at a competitive price.
Newmans’ production facilities are certified to the
requirements of the ISO 9001:2000 Standard and
comply with API, ASTM, and ASME industry
standards. All Newmans’ products are
manufactured, inspected, and tested in
accordance with the most rigid quality standards
as well as any specific customer requirements.
Allow us to show you why Newmans is
“The Reliable Source” for all your valve needs.
•
•
•
•
•
•
Engineered Solutions
Complete Alloy Coverage
Ready to Ship Inventories
Competitive Factory Lead Times
Sizes ½” to 60” Classes 125 to 4500
Industry Approved Products
Toll Free: 800.231.3505
www.NewmansValve.com
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Cast Steel Bolted Bonnet Angle Valves
Sizes: 2” thru 12” • Pressure Class: 150 thru 600
27
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Typical Newco Cast Steel Bolted
Bonnet Angle Valve Expanded
View
18
19
1. Body: Newco cast steel bodies provide low resistance flow
17
and optimum strength and performance.
2. Bonnet: Newco bonnet assemblies are built to the same
standards as the bodies.
3. Back Seat Bushing: The back seat, when engaged with
the stem head, provides a stable shutoff to the stuffing box
which isolates the packing from flow exposure.
4. Stem: The stem inserts vertically into the disc.
5. Lock Groove: The lock groove receives the split lock ring
10
9
16
14
which allows the disc nut to lift the disc during cycling.
6. Split Ring: The split ring allows the disc nut to lift the disc
during cycling.
7. Disc: Newmans disc is machined to the tightest tolerances
to ensure trouble free shutoff and cycling.
25
2
8. Disc Nut: The disc nut, in conjunction with the split lock
15
9. Gland: Compresses the packing to create a stem seal above
13
ring, secures the disc to the stem.
the back seat, between the bonnet and stem.
12
11
22
10. Gland Flange: Applies pressure to the gland for
accurate packing compression.
11. & 12. Gland Bolts & Nuts: The gland bolt and nut
allows for easy adjustments for packing compression.
13. Gland Bolt Pin: The gland bolt pin secures the gland
bolts to the yoke & bonnet.
3
20
21
14. Packing: The packing creates a seal above the back seat,
between the bonnet and stem.
15. Stuffing Box: The stuffing box contains the packing.
16. Stem Nut: The stem nut provides a precision guide for
24
proper stem alignment.
17. Handwheel: The handwheel cycles the valve.
18. Handwheel Nut: The handwheel nut secures the
22
handwheel to the bonnet assembly.
1
19. Handwheel Washer: The washer helps to prevent
4
loosening or distributes pressure evenly.
20. Bonnet Gasket: The bonnet gasket creates a leakproof
seal between the bonnet and body.
21. & 22. Bonnet Studs & Nuts: The bonnet studs and
nuts secure the bonnet to the body.
23
23. Seat Ring: To ensure a stable shutoff, the seat rings is
aligned and seal-welded into the valve, then precision ground for
optimal seating.
5
24. Disc Guide: The disc guides provide a stable track for
8
keeping the disc aligned with the seat during cycling.
25. Spacer Ring: Assists the packing rings in creating a seal
6
above the back seat, between the bonnet and stem.
7
28
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Angles
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 150 - Sizes: 2” thru 12”
Pressure Class Range: 150 thru 600
C
B
(open)
D
A
Component
Body
Seat Ring
Disc
Disc Nut
Stem
*Bonnet Gasket
Bonnet
Bonnet Studs
Bonnet Nuts
Back Seat Bushing
Spacer Ring
nps
Size
dn
in
A
mm
in
B
mm
in
C
mm
in
D
mm
RF lbs
Wt. kg
Typical Bill of Materials (See page 5 for available materials.)
CB2
2
50
4.0
107
15.2
386
8
203
6
152
57
125
CB3
CB4/2
ASTM A216 GR.WCB
ASTM A105
ASTM A276 - 410
ASTM A276 - 410
ASTM A182 F6a
Spiral Wound 316 Stainless Steel/Graphite
ASTM A216 GR.WCB
ASTM A193 GR.B7
ASTM A194 GR.2H
Component
Packing
Gland Bolt Pins
Gland Bolts
Gland
Gland Flange
Gland Bolt Nuts
Stem Nut
Split Ring
Handwheel
CB2
CB3
CB4/2
Die Formed Graphite with Braided Graphite End Rings
Commercial
ASTM A193 GR.B7
ASTM A276 - 410
ASTM A216 GR.WCB
ASTM A194 GR.2H
ASTM A439 GR.D-2
ASTM A276 - 410
ASTM A276 - 410
Handwheel Nut
Handwheel
Commercial
Commercial
3
75
4.75
121
16.9
429
10
254
7.5
191
84
185
4
100
5.75
146
20.4
518
12
305
9
229
141
310
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Class 150
6
150
8.0
203
21.8
554
15
381
11
279
234
515
29
ASTM A539 Type 60-40-18
8
200
9.75
248
27.4
696
18
457
13.5
343
399
878
10
250
12.25
311
31
787
22
559
16
406
611
1344
12
300
13.75
349
37.8
960
24
610
19
483
794
1747
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Angles
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 300 - Sizes: 2” thru 12”
Pressure Class Range: 150 thru 600
C
B
(open)
D
A
Component
Body
Seat Ring
Disc
Disc Nut
Stem
*Bonnet Gasket
Bonnet
Bonnet Studs
Bonnet Nuts
Back Seat Bushing
Spacer Ring
nps
Size
dn
in
A
mm
in
B
mm
in
C
mm
in
D
mm
RF lbs
Wt. kg
Typical Bill of Materials (See page 5 for available materials.)
CB2
2
50
5.25
133
15
381
10
254
6.5
165
68
150
CB3
CB4/2
ASTM A216 GR.WCB
ASTM A105
ASTM A276 - 410
ASTM A276 - 410
ASTM A182 F6a
Spiral Wound 316 Stainless Steel/Graphite
ASTM A216 GR.WCB
ASTM A193 GR.B7
ASTM A194 GR.2H
Component
Packing
Gland Bolt Pins
Gland Bolts
Gland
Gland Flange
Gland Bolt Nuts
Stem Nut
Split Ring
Handwheel
CB2
CB3
CB4/2
Die Formed Graphite with Braided Graphite End Rings
Commercial
ASTM A193 GR.B7
ASTM A276 - 410
ASTM A216 GR.WCB
ASTM A194 GR.2H
ASTM A439 GR.D-2
ASTM A276 - 410
ASTM A276 - 410
Handwheel Nut
Handwheel
Commercial
Commercial
3
75
6.25
159
16.9
429
12
305
8.25
210
108
238
4
100
7
178
21.7
551
14
356
10
254
198
436
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Class 300
6
150
8.75
222
28
711
17
432
12.5
318
392
862
30
ASTM A539 Type 60-40-18
8
200
11
279
30.7
780
24
610
15
381
560
1232
10
250
12.25
311
37.5
953
24
610
17.5
445
934
2055
12
300
14
356
41.6
1049
27
686
20.5
521
1288
2837
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Angles
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 600 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 600
C
B
(open)
D
A
Component
Body
Seat Ring
Disc
Disc Nut
Stem
*Bonnet Gasket
Bonnet
Bonnet Studs
Bonnet Nuts
CB2
Back Seat Bushing
Spacer Ring
nps
Size
dn
in
A
mm
in
B
mm
in
C
mm
in
D
mm
RF lbs
Wt. kg
CB3
ASTM A216 GR.WCB
ASTM A105
ASTM A276 - 410
ASTM A276 - 410
ASTM A182 F6a
Soft Steel Ring Joint
ASTM A216 GR.WCB
ASTM A193 GR.B7
ASTM A194 GR.2H
Typical Bill of Materials (See page 5 for available materials.)
ASTM A276 - 410
ASTM A276 - 410
2
50
5.75
146
18.9
480
8.8
224
6.5
165
79
36
2.5
75
6.5
165
20.9
531
9.8
249
7.5
191
110
50
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
Component
Packing
Gland Bolt Pins
Gland Bolts
Gland
Gland Flange
Gland Bolt Nuts
Stem Nut
Split Ring
Handwheel
CB2
CB3
CB4/2
Die Formed Graphite with Braided Graphite End Rings
Commercial
ASTM A193 GR.B7
ASTM A276 - 410
ASTM A216 GR.WCB
ASTM A194 GR.2H
ASTM A439 GR.D-2
Handwheel Nut
Handwheel
Commercial
Commercial
Class 600
3
100
7.0
178
19.8
503
11.0
279
8.3
211
141
64
31
4
150
8.5
216
22.2
564
14.0
356
9.0
229
256
116
ASTM A539 Type 60-40-18
6
200
11.0
279
28.2
716
17.7
450
14.0
356
640
291
8
250
13.0
330
38.5
978
24.8
630
16.5
419
961
437
www.NewmansValve.com
Toll Free: 800.231.3505
Newmans fine assortment of Newco and
OIC forged valves is guaranteed to satisfy
the most discriminating of tastes.
A complete line of forged steel and forged stainless steel gates, globes, and checks in sizes: 1/4” thru 2” & classes: 150 thru 4500
Corporate Office: 1300 Gazin St. - Houston, TX 77020
Toll Free: 1.800.231.3505 • www.NewmansValve.com
Cast Steel Bolted Cover Swing Check Valves
Sizes: 2” thru 24” • Pressure Class: 150 thru 1500
33
Rev: 032307.01
Manufactured by Newmans™
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Typical Newco Cast Steel Bolted
Cover Swing Check Valve
Expanded View
Note: Classes 150 & 300 uses external hinge pin
1. Body: Newco cast steel bodies provide low resistance flow
and optimum strength and performance.
2. Cover: The cover allows access to internal components.
3. Cover Gasket: The cover gasket creates a leakproof seal
between the bonnet and body.
4. Seat Ring: To ensure a stable shutoff, the seat ring is
aligned and seal-welded into the valve, then precision ground for
optimal seating.
5. Disc: The disc allows uni-directional flow and restricts back
flow with trouble free shutoff.
6. Swing Arm: The swing arm allows the disc to open and close.
7. & 8. Disc Nut & Pin: The disc nut and pin secures the disc
to the swing arm.
9. Hinge Pin: The hinge pin provides a stable mechanism for
the swing arm to operate.
10. Plug: The plug secures the arm pin inside the valve.
11. Plug Gasket: The plug gasket creates a leak-proof seal
between the plug and body.
12. & 13. Cover Studs & Nuts: The cover studs and nuts
secure the bonnet to the body.
14. Eyebolt: The eyebolt is use to aid in lifting the valve.
14
13
2
3
12
12
1
6
4
8
9
7
5
11
10
34
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Swing Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 150 - Sizes: 2” thru 24”
Pressure Class Range: 150 thru 1500
Hinge pin and
plug details
Eye bolts are on
sizes 5” and larger
B
Center of Port
B
A-RF
Component
Body
Cover
Disc 2” thru 5”
Disc 6” and larger
Swing Arm
Seat Ring
*Cover Gasket
Hinge Pin
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
2
50
8.0
203
8.0
203
6.8
173
36
16
29
13
A-BW
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105N
ASTM A182-F6a ASTM A182-F316/
ASTM A182-F6a
/HF
HF
ASTM A216-WCB ASTM A216-WCB/ ASTM A216-WCB/
/13% Chrome
HF
316 Faced
ASTM A216-WCB
ASTM A105
Spiral Wound 316 Stainless Steel/Graphite
ASTM A276-410
ASTM A276-316
2.5
75
8.5
216
8.5
216
7.4
188
51
23
38
17
3
100
9.5
241
9.5
241
7.7
196
64
29
49
22
4
150
11.5
292
11.5
292
8.5
216
98
45
73
33
5
125
13.0
330
13.0
330
12.3
315
135
61
110
50
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Name Plate
Plug Gasket
Cover Bolt
CB3
304 Stainless Steel
Stainless Steel
ASTM A193-B7
Cover Nut
35
10
250
24.5
622
24.5
622
17.2
437
463
210
421
191
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Disc Nut
Eye Bolt 5” thru 24”
8
200
19.5
495
19.5
495
14.3
363
298
135
243
110
CB4/2
AISI 1020
Plug
Disc Pin
Class 150
6
150
14.0
356
14.0
356
12.8
325
181
398
146
66
CB2
12
300
27.5
699
27.5
699
17.9
455
688
313
591
269
ASTM A276-316
A194-8
Carbon Steel
14
350
31.0
787
31.0
787
19.6
498
898
408
766
348
16
400
34.0
864
34.0
864
21.2
538
1147
521
979
445
18
450
38.5
978
38.5
978
24.2
615
1367
621
1190
541
20
500
38.5
978
38.5
978
27.4
696
1808
822
1585
720
24
600
51.0
1295
51.0
1295
30.0
762
2866
1308
2250
1123
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Swing Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 300 - Sizes: 2” thru 24”
Pressure Class Range: 150 thru 1500
Hinge pin and
plug details
Eye bolts are on
sizes 5” and larger
B
Center of Port
B
A-RF
Component
Body
Cover
Disc 2” thru 5”
Disc 6” and larger
Swing Arm
Seat Ring
*Cover Gasket
Hinge Pin
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
2
50
10.5
267
10.5
267
7.6
193
58
26
44
20
A-BW
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105N
ASTM A182-F6a ASTM A182-F316/
ASTM A182-F6a
/HF
HF
ASTM A216-WCB ASTM A216-WCB/ ASTM A216-WCB/
/13% Chrome
HF
316 Faced
ASTM A216-WCB
ASTM A105
Spiral Wound 316 Stainless Steel/Graphite
ASTM A276-410
ASTM A276-316
2.5
75
11.5
292
11.5
292
8.3
211
86
39
55
25
3
100
12.5
318
12.5
318
8.9
226
95
43
78
35
4
150
14.0
356
14.0
356
9.8
249
144
65
103
47
5
125
15.75
400
15.75
400
13.3
338
232
105
185
84
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Name Plate
Plug Gasket
CB3
304 Stainless Steel
Stainless Steel
ASTM A193-B7
ASTM A193-B7M
Cover Nut
ASTM A276-410
ASTM A276-316
Plug
Disc Pin
AISI 1020
ASTM A276-316
Disc Nut
Eye Bolt 5” thru 24”
A194-8
Carbon Steel
8
200
21.0
533
21.0
533
15.9
404
433
197
341
155
36
CB4/2
Cover Bolt
Class 300
6
150
17.5
445
17.5
445
14.0
356
283
129
214
97
CB2
10
250
24.5
622
24.5
622
18.7
475
694
315
562
255
12
300
28.0
711
28.0
711
21.9
556
1003
456
815
370
14
350
33.0
838
33.0
838
23.1
587
1345
611
1087
494
16
400
34.0
864
34.0
864
25.2
640
1720
782
1397
635
18
450
38.5
978
38.5
978
28.6
726
2271
1032
1873
851
20
500
40.0
1016
40.0
1016
30.2
767
2888
1313
2400
1091
24
600
53.0
1346
53.0
1346
33.6
853
4718
2145
3995
1816
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Swing Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 600 - Sizes: 2” thru 14”
Pressure Class Range: 150 thru 1500
Eye bolts are on
sizes 5” and larger
B
Center of Port
B
A-RF
Component
Body
Cover
Disc 6” and larger
Swing Arm
Seat Ring
*Cover Gasket
Hinge Pin
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
Typical Bill of Materials (See page 5 for available materials.)
CB2
Disc 2” thru 5”
2
50
11.5
292
11.5
292
7.8
198
65
30
51
23
A-BW
CB3
CB4/2
ASTM A216-WCB
ASTM A105N
ASTM A182-F6a
ASTM A182-F6a
ASTM A182-F316
/HF
ASTM A216-WCB ASTM A216-WCB/ ASTM A216-WCB/
/13% Chrome
HF
316 Faced
ASTM A216-WCB
ASTM A105
Soft Steel Ring Joint
ASTM A276-410
ASTM A276-316
2.5
75
13.0
330
13.0
330
8.8
224
90
41
68
31
3
100
14.0
356
14.0
356
9.7
246
115
52
91
41
4
150
17.0
432
17.0
432
13.3
338
215
98
161
73
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Name Plate
Washer
CB2
CB3
304 Stainless Steel
Stainless Steel
Cover Bolt
ASTM A193-B7
ASTM A193-B7M
Cover Nut
ASTM A276-410
ASTM A276-316
Plug
Pin
AISI 1020
ASTM A276-316
Hex Nut
Eye Bolt 5” thru 24”
A194-8
Carbon Steel
Class 600
5
125
20.0
508
20.0
508
15.5
394
348
159
255
116
37
CB4/2
6
150
22.0
559
22.0
559
16.8
427
481
219
349
159
8
200
26.0
660
26.0
660
19.4
493
926
421
762
346
10
250
31.0
787
31.0
787
22.6
574
1279
581
1021
483
12
300
33.0
838
33.0
838
25.4
645
1722
783
1411
641
14
350
35.0
889
35.0
889
26.4
671
2009
913
1650
750
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Swing Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 900 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 1500
Eye bolts are on
sizes 5” and larger
B
Center of Port
B
A-RF
Component
Body
Cover
Disc 2” thru 5”
Disc 6” and larger
Swing Arm
Seat Ring
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105N
ASTM A182-F6a
ASTM A182-F6a
ASTM A182-F316
/HF
ASTM A216-WCB ASTM A216-WCB/ ASTM A216-WCB/
/13% Chrome
HF
316 Faced
ASTM A216-WCB
ASTM A105
*Cover Gasket
Hinge Pin
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
A-BW
Soft Steel Ring Joint
ASTM A276-410
ASTM A276-316
2
50
14.5
368
14.5
368
13.1
329
104
47
78
35
3
75
15.0
381
15.0
381
14.8
329
184
84
138
63
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Name Plate
Washer
CB2
CB3
304 Stainless Steel
Stainless Steel
Cover Bolt
ASTM A193-B7
ASTM A193-B7M
Cover Nut
ASTM A276-410
ASTM A276-316
Plug
Pin
AISI 1020
ASTM A276-316
Hex Nut
Eye Bolt 5” thru 24”
A194-8
Carbon Steel
Class 900
4
100
18.0
457
18.0
457
14.5
368
344
156
258
129
38
CB4/2
6
150
24.0
610
24.0
610
18.8
478
770
350
578
263
8
200
29.0
737
29.0
737
23.6
599
1482
674
1112
505
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Swing Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 1500 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 1500
Eye bolts are on
sizes 5” and larger
B
Center of Port
B
A-RF
Component
Body
Cover
Disc 2” thru 5”
Disc 6” and larger
Swing Arm
Seat Ring
Typical Bill of Materials (See page 5 for available materials.)
CB2
CB3
CB4/2
ASTM A216-WCB
ASTM A105N
ASTM A182-F6a
ASTM A182-F6a
ASTM A182-F316
/HF
ASTM A216-WCB ASTM A216-WCB/ ASTM A216-WCB/
/13% Chrome
HF
316 Faced
ASTM A216-WCB
ASTM A105
*Cover Gasket
Hinge Pin
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
A-BW
Soft Steel Ring Joint
ASTM A276-410
ASTM A276-316
2
50
14.5
368
14.5
368
13.1
333
165
75
153
70
2.5
75
16.5
419
16.5
419
13.7
348
243
110
223
101
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Name Plate
Washer
CB2
CB3
304 Stainless Steel
Stainless Steel
Cover Bolt
ASTM A193-B7
ASTM A193-B7M
Cover Nut
ASTM A276-410
ASTM A276-316
Plug
Pin
AISI 1020
ASTM A276-316
Hex Nut
Eye Bolt 5” thru 24”
A194-8
Carbon Steel
Class 1500
3
100
18.5
470
18.5
470
14.8
376
284
129
256
116
39
CB4/2
4
150
21.5
546
21.5
546
15.2
386
462
269
425
193
6
200
27.8
706
27.8
706
19.2
488
940
427
895
407
8
203
32.8
833
32.8
833
27.0
686
1030
468
985
448
www.NewmansValve.com
Toll Free: 800.231.3505
POWERful Performers
High quality valves for pressures and temperatures to match.
Newmans manufactures a complete line of Newco, OIC, and Cooper
valve products for use in a broad range of applications within Power
and Process Industries.
Make Newco Valves your primary source for Severe Service Power
applications. We manufacture Cast Pressure Seal and Forged
Welded Bonnet Gate, Globe, and Check Valves in sizes through 24”
and Pressure Classes through ASME 4500. We offer a full range of
materials specific to the Power Industry including A105 (WCB),
F9 (C12), F11 (WC6), F22 (WC9), and F91 (C12A).
Our newest member of the Newco family of Products for Power is
the QuadroSphere™ Severe Service Ball Valve. Its unique geometry
vastly improves Ball and Seat life in high pressure water as well as
media containing abrasives by minimizing velocity and protecting
the sealing surfaces from erosive effects.
Our in-house Automation Center provides single source expertise for
sizing and assembling Motor Operated Valves. Additionally, our Field
Service team is available for verification of installation and start
up activities.
Newmans’ world-wide production facilities are certified to the
requirements of the ISO 9001:2000 Standard and compliant to the
industry standards of API, ASTM, and ASME. All Newmans’ products
are manufactured, inspected, and tested in
accordance with the most
rigid quality standards
as well as any specific
customer requirements.
Toll Free: 800.231.3505
www.NewmansValve.com
Allow us to show why Newmans is “The
Reliable Source” for all your valve needs.
•
•
•
•
•
Engineered Solutions
Complete Alloy Coverage
Ready to Ship Inventories
Competitive Factory Lead Times
Sizes ½” to 60” Classes 125 to 4500
Corporate Office: 1300 Gazin St. - Houston, TX 77020 • Toll Free: 1.800.231.3505 • www.NewmansValve.com
Cast Steel Bolted Cover Tilting Disc Check Valves
Manufactured by Newmans™
Sizes: 2” thru 12”•Pressure Class: 150 thru 300 (Pressure Seal 600 thru 2500)
41
Rev: 032307.01
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Typical Newco Cast Steel Bolted
Cover Tilting Disc Check Valve
Expanded View
Note: Classes 600 & larger uses internal hinge pin
1. Body: Newco cast steel bodies provide low resistance flow
and optimum strength and performance.
2. Cover: The cover allows access to internal components.
3. Cover Gasket: The cover gasket creates a leak-proof seal
between the bonnet and body.
4. Seat Ring: To ensure a stable shutoff, the seat ring is
aligned and seal-welded into the valve, then precision ground for
optimal seating.
5. Disc: The disc allows uni-directional flow and restricts back
flow with trouble free shutoff.
6. Plug Gasket: The plug gasket creates a leak-proof seal
between the plug and body.
7. Plug: The disc nut and pin secures the disc to the arm.
8. Hinge Pin: The hinge pin provides a stable mechanism for
the disc to operate.
9. Hinge Pin Washer: The hinge pin washer provides
accurate disc positioning.
10. & 11. Cover Studs & Nuts: The cover studs and nuts
secure the bonnet to the body.
12. Eyebolt: The eyebolt is use to aid in lifting the valve.
12
11
2
3
10
7
6
1
5
4
9
6
8
7
42
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Cast Steel Bolted Cover Tilting Disc Check
Styles: CB2, CB3, & CB4/2
Class: 150 - Sizes: 2.5” thru 12”
Pressure Class Range: 150 thru 300 (See Pressure Seal thru 2500)
Design and Manufacturing Standards
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Eye bolts are on
sizes 5” and larger
Hinge pin, plug, and
gasket details
B
Center of Port
B
A-RF
A-BW
Typical Bill of Materials (See page 5 for available materials.)
Component
Body
Cover
Disc
Seat Ring
*Cover Gasket
Hinge Pin
CB3
CB4/2
ASTM A216-WCB
ASTM A105/A216-WCB
ASTM A216-WCB
ASTM A283-D/A216-WCB
Spiral Wound 304 Stainless Steel/Graphite
ASTM A276-410
Hinge Pin Washer
ASTM A479-410
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB2
2.5
65
8.5
216
8.5
216
8.27
210
42
92
30
66
3
75
9.5
241
9.5
241
7.5
190
68
150
50
110
4
100
11.5
292
11.5
292
7.3
185
92
202
78
172
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Plug Gasket
Name Plate
Cover Bolts
Cover Nuts
Plug
CB2
CB3
CB4/2
304 Stainless Steel/Graphite
304 Stainless Steel
ASTM A193-B7
ASTM A194-2H
ASTM A194-2HM
ASTM A105
Eye Bolt 5” and
larger
Class 150
6
150
14.0
356
14.0
356
9.0
230
174
383
136
299
43
ASTM A108-1020
8
200
19.5
495
19.5
495
13.8
350
302
664
244
537
10
250
24.5
622
24.5
622
15.4
390
477
1049
376
827
12
300
27.5
699
27.5
699
16.1
410
655
1441
464
1021
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Tilting Disc Check
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 300 - Sizes: 3” thru 12”
Pressure Class Range: 150 thru 300 (See Pressure Seal thru 2500)
Eye bolts are on
sizes 5” and larger
Hinge pin, plug, and
gasket details
B
Center of Port
B
A-RF
A-BW
Typical Bill of Materials (See page 5 for available materials.)
Component
Body
Cover
Disc
Seat Ring
*Cover Gasket
Hinge Pin
CB3
CB4/2
ASTM A216-WCB
ASTM A105/A216-WCB
ASTM A216-WCB
ASTM A283-D/A216-WCB
Spiral Wound 304 Stainless Steel/Graphite
ASTM A276-410
Hinge Pin Washer
ASTM A479-410
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB2
3
75
12.5
318
12.5
318
6.5
165
82
180
57
125
4
100
14.0
356
14.0
356
7.3
185
122
268
78
172
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Component
Plug Gasket
Name Plate
Cover Bolts
Cover Nuts
Plug
Eye Bolt 5” and
larger
Class 300
6
150
17.5
444
17.5
444
8.8
224
252
554
168
370
44
8
200
21.0
533
21.0
533
13.4
340
386
849
278
612
CB2
CB3
CB4/2
304 Stainless Steel/Graphite
304 Stainless Steel
ASTM A193-B7
ASTM A194-2H
ASTM A194-2HM
ASTM A105
ASTM A108-1020
10
250
24.5
622
24.5
622
15.2
385
568
1250
458
1008
12
300
28.0
711
28.0
711
17.7
450
818
1800
690
1518
www.NewmansValve.com
Toll Free: 800.231.3505
Cast Steel Bolted Bonnet Stop Check Valves
Sizes: 2” thru 14” • Pressure Class: 150 thru 1500
45
Rev: 032307.01
Manufactured by Newmans™
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Typical Newco Cast Steel Bolted
Bonnet Stop Check Valve
Expanded View
16
17
1. Body: Newco cast steel bodies provide low resistance flow
and optimum strength and performance.
15
2. Bonnet: Newco bonnet assemblies are built to the same
standards as the bodies.
3. Back Seat: The back seat, when engaged with the stem
head, provides a stable shutoff to the stuffing box which
isolates the packing from flow exposure.
4. Stem: The stem inserts vertically into the disc.
5. Disc: Newmans 1-piece vented disc is machined to the
tightest tolerances to ensure trouble free shutoff and cycling.
6. Disc Nut: The disc nut serves as a mechanical guide acting
on the stem to ensure proper alignment of the disc to the seat.
7. Gland: Compresses the packing to create a stem seal above
14
8
7
the back seat, between the bonnet and stem.
2
8. Gland Flange: Applies pressure to the gland for accurate
13
9. & 10. Gland Bolts & Nuts: The gland bolt and nut allows
11
packing adjustments.
for easy adjustments for packing compression.
10
12
9
20
11. Gland Bolt Pin: The gland bolt pin secures the gland
bolts to the yoke & bonnet.
12. Packing: The packing creates a seal above the back seat,
between the bonnet and stem.
13. Stuffing Box: The stuffing box contains the packing.
14. Stem Nut: The stem nut provides a precision guide for
3
18
19
proper stem alignment.
15. Handwheel: The handwheel cycles the valve.
16. Handwheel Nut: The handwheel nut secures the
22
handwheel to the bonnet assembly.
17. Handwheel Washer: The washer helps to prevent
loosening or distributes pressure evenly.
20
18. Bonnet Gasket: The bonnet gasket creates a leakproof
seal between the bonnet and body.
1
19. & 20. Bonnet Studs & Nuts: The bonnet studs and
4
nuts secure the bonnet to the body.
21. Seat Ring: To ensure a stable shutoff, the seat ring is
aligned and seal-welded into the valve, then precision ground for
optimal seating.
22. Disc Guide: The disc guides provide a stable track for
21
keeping the disc aligned with the seat during cycling.
6
Vent
46
Rev: 032307.01
5
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Stop Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 150 - Sizes: 2” thru 14”
Pressure Class Range: 150 thru 1500
C
B
(open)
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
CB2
CB3
ASTM A216-WCB**
Typical Bill of Materials (See page 5 for available materials.)
CB4/2
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Spiral Wound 316 Stainless Steel/Graphite
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
A-BW
2
50
8.0
203
8.0
203
14.9
378
8.0
203
51
23
51
23
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2.5
75
8.5
216
8.5
216
15.8
401
10.0
254
73
33
73
33
3
100
9.5
241
9.5
241
16.6
422
10.0
254
93
42
93
42
4
150
11.5
292
11.5
292
19.9
505
12.0
305
137
62
137
62
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
** ASTM A216-WCB/HF for 2” to 4”.
Rev: 032307.01
CB2
CB3
CB4/2
ASTM A36
ASTM A194-2H
ASTM A194-2HM
ASTM A307-B
ASTM A193-B7M
ASTM A105/HF (6” & larger)
N/A
ASTM A666-304
Commercial
ASTM A276-410
ASTM A276-316
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 150
5
125
14.0
356
14.0
356
21.8
554
14.0
356
192
87
192
87
47
6
150
16.0
406
16.0
406
22.4
569
16.0
406
243
110
243
110
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
N/A
8
200
19.5
495
19.5
495
26.5
673
18.0
457
419
190
419
190
10
250
24.5
622
24.5
622
30.6
777
22.0
610
507
276
507
276
12
300
27.5
699
27.5
699
34.8
884
24.0
610
948
476
948
476
14
350
31.0
787
31.0
787
41.4
1052
27.0
610
1276
625
1276
625
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Stop Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 300 - Sizes: 2” thru 14”
Pressure Class Range: 150 thru 1500
C
B
(open)
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
CB2
CB3
ASTM A216-WCB**
Typical Bill of Materials (See page 5 for available materials.)
CB4/2
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Spiral Wound 316 Stainless Steel/Graphite
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
A-BW
2
50
10.5
267
10.5
267
16.9
429
10.0
254
75.0
34
55
25
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2.5
75
11.5
292
11.5
292
17.8
452
10.0
254
100.0
45
79
36
3
100
12.5
318
12.5
318
19.2
488
12.0
305
130.0
59
101
46
4
150
14.0
357
14.0
357
23.0
584
14.0
356
203.0
92
163
74
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
** ASTM A216-WCB/HF for 2” to 4”.
Rev: 032307.01
CB2
CB3
CB4/2
ASTM A36
ASTM A194-2H
ASTM A194-2HM
ASTM A307-B
ASTM A193-B7M
ASTM A105/HF (6” & larger)
N/A
ASTM A666-304
Commercial
ASTM A276-410
ASTM A276-316
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 300
5
125
15.75
400
15.75
400
27.4
696
14.0
406
294.0
134
242
110
48
6
150
17.5
445
17.5
445
30.6
777
18.0
457
421.0
191
355
161
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
N/A
8
200
22.0
559
22.0
559
36.2
919
24.0
610
715
325
566
257
10
250
24.5
622
24.5
622
40.8
1036
24.0
610
1015
461
770
350
12
300
28.0
711
28.0
711
47.3
1201
27.0
686
1500
682
1218
554
14
350
33.0
838
33.0
838
54.3
1379
24.0
610
2446
1112
1996
907
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Stop Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 600 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 1500
C
B
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
CB2
Typical Bill of Materials (See page 5 for available materials.)
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2
50
11.5
292
11.5
292
18.4
467
10.0
254
90
41
79
36
2.5
75
13.0
325
13.0
325
20.0
508
10.0
254
130
59
110
50
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB3
ASTM A216-WCB/HF
A-BW
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 600
3
100
14.0
256
14.0
256
24.4
620
14.0
356
170
77
141
64
49
4
150
17.0
435
17.0
435
29.0
737
18.0
457
313
142
256
116
CB2
CB3
ASTM A36
ASTM A194-2H
ASTM A307-B
Integral
N/A
ASTM A666-304
Commercial
ASTM A276-410
ASTM A439-D2
CB4/2
ASTM A194-2HM
ASTM A193-B7M
ASTM A276-316
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
ASTM A276-410
6
200
22.0
559
22.0
559
37.9
963
24.0
610
778
354
640
291
8
203
26.0
660
26.0
660
44.7
1135
24.0
610
1245
566
961
437
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Stop Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 900 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 1500
C
B
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB2
A-BW
CB3
ASTM A216-WCB/HF
Typical Bill of Materials (See page 5 for available materials.)
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2
50
14.5
368
14.5
368
22.6
574
12.0
305
198
90
176
80
3
75
15.0
381
15.0
381
26.0
660
16.0
406
335
152
297
135
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
CB2
CB3
ASTM A36
ASTM A194-2H
ASTM A307-B
Integral
N/A
ASTM A666-304
Commercial
ASTM A276-410
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 900
4
100
18.0
457
18.0
457
30.6
777
20.0
508
440
200
376
171
50
CB4/2
ASTM A194-2HM
ASTM A193-B7M
ASTM A276-316
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
ASTM A276-410
6
150
24.0
610
24.0
610
39.6
1006
24.0
610
1675
761
1144
520
8
200
29.0
737
29.0
737
60.1
1527
24.0
610
2090
950
1634
743
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Cover Stop Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 1500 - Sizes: 2” thru 8”
Pressure Class Range: 150 thru 1500
C
B
A-RF
Component
Body
Disc 2” thru 4”
Disc 5” and larger
Stem
Bonnet
*Bonnet Gasket
Bonnet Nuts
Bonnet Studs
Back Seat Bushing
*Packing
Gland
Gland Flange
nps
Size
dn
in
A-RF
mm
in
A-BW
mm
in
B
mm
in
C
mm
RF lbs
Wt. kg
BW lbs
Wt. kg
CB2
CB3
ASTM A216-WCB/HF
A-BW
Typical Bill of Materials (See page 5 for available materials.)
Component
Gland Bolt Pins
Gland Nuts
Gland Bolts
Seat Ring
Split Ring
Nameplate
Nameplate Rivets
Disc Nut
Stem Nut
ASTM A276-410
ASTM A276-316
ASTM A216-WCB/
ASTM A216-WCB/
ASTM A216HF
13% Chrome
WCB/316
ASTM A276-410
ASTM A276-316
ASTM A216-WCB
Soft Steel Ring Joint
ASTM A194-2H
ASTM A194-2HM
ASTM 193-B7
ASTM A193-B7M
ASTM A276-410
ASTM A276-316
Graphite W/Braided Carbon Fiber End Rings
ASTM A276-410
ASTM A276-316
ASTM A276-WCB
2
50
14.5
368
14.5
368
19.6
498
9.8
249
209
95
143
65
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
3
75
18.5
470
18.5
470
25.6
650
17.7
450
551
250
460
209
CB2
CB3
ASTM A36
ASTM A194-2H
ASTM A307-B
Integral
N/A
ASTM A666-304
Commercial
ASTM A276-410
ASTM A439-D2
Handwheel Washer
Handwheel Nut
Handwheel
Spacer Ring
Class 1500
51
CB4/2
ASTM A194-2HM
ASTM A193-B7M
ASTM A276-316
ASTM A36
ASTM A36
ASTM A536 (65-45-12)
ASTM A276-410
4
100
21.5
546
21.5
546
30.8
782
19.7
500
959
436
830
377
6
150
27.75
705
27.75
705
36.5
927
25.2
640
1191
541
996
453
www.NewmansValve.com
Toll Free: 800.231.3505
Betcha we got
what you need.
An endless supply of ready-to-ship inventory.
• Cast Steel
• Cast Chrome Alloys
• Cast Iron
• Ductile Iron
• Forged Steel
• Forged Alloys
• Pressure Seals
• Trunnion Balls
• Floating Balls
• QuadroSphere® Balls
• Cast Exotic Alloys
• Forged Exotic Alloys
• Exotic Balls
Newmans manufactures a complete line of Newco and OIC valve products
in a full range of sizes, classes, and materials. Our newest additions are
Cooper exotic valves and QuadroSphere® specialty trunnion mounted
ball valves.
Newmans has been supplying quality valves to the world’s hydrocarbon,
pulp & paper, marine, power, chemical, mining, and general industries for
more than 60 years. Newmans manufactures and inventories gate, globe,
check, ball, and specialty valves in sizes from 1/2” thru 60” in diameter and
in pressure classes from 125 thru 4500 lbs. in most alloys.
Newmans ’ world-wide production facilities are certified to the
requirements of the ISO 9001:2000 Standard and are compliant to the
industry standards of API, ASTM and ASME. All Newmans products are
manufactured, inspected, and tested in accordance to the most rigid quality
standards as well as specific customer requirements.
So, whether it’s cast steel for general service or exotic alloys for corrosive
applications or metal seated ball valves for severe service applications,
Newmans is “The Reliable Source” for all your valve needs.
•
•
•
•
•
Engineered solutions
Complete alloy coverage
Ready-to-ship inventories
Competitive factory lead times
Sizes: 1/2” thru 60” & Classes: 125 thru 4500
new
Please visit our web site at www.NewmansValve.com to see our complete line of
Newco, Cooper, & OIC valves.
Featuring Newmans’ Newco Cast Steel product line.
Toll Free: 800.231.3505
www.NewmansValve.com
Corporate: 1300 Gazin - Houston, TX 77020 • Phone: 800.231.3505 • Manufacturer of Newco, OIC, and Cooper valves: Gates • Globes • Checks • Balls • Pressure Seals • Specialties
Cast Steel Bolted Bonnet Angle Stop Check Valves
Sizes: 2” thru 12” • Pressure Class: 150 thru 600
53
Rev: 032307.01
Manufactured by Newmans™
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Typical Newco Cast Steel Bolted
Bonnet Angle Stop Check Valve
Expanded View
16
17
1. Body: Newco cast steel bodies provide low resistance flow
and optimum strength and performance.
15
2. Bonnet: Newco bonnet assemblies are built to the same
standards as the bodies.
3. Back Seat Bushing: The back seat, when engaged with
the stem head, provides a stable shutoff to the stuffing box
which isolates the packing from flow exposure.
4. Stem: The stem inserts vertically into the disc.
5. Disc: Newmans 1-piece disc is machined to the tightest
tolerances to ensure trouble free shutoff and cycling.
8
7
12
6. Disc Nut: The disc nut serves as a mechanical guide acting
on the stem to ensure proper alignment of the disc to the seat.
7. Gland: Compresses the packing to create a stem seal above
10
23
the back seat, between the bonnet and stem.
2
8. Gland Flange: Applies pressure to the gland for accurate
13
9. & 10. Gland Bolts & Nuts: The gland bolt and nut allows
11
packing adjustments.
for easy adjustments for packing compression.
14
9
20
11. Gland Bolt Pin: The gland bolt pin secures the gland
bolts to the yoke & bonnet.
12. Packing: The packing creates a seal above the back seat,
between the bonnet and stem.
13. Stuffing Box: The stuffing box contains the packing.
14. Stem Nut: The stem nut provides a precision guide for
3
18
19
proper stem alignment.
15. Handwheel: The handwheel cycles the valve.
16. Handwheel Nut: The handwheel nut secures the
22
handwheel to the bonnet assembly.
17. Handwheel Washer: The washer helps to prevent
loosening or distributes pressure evenly.
20
18. Bonnet Gasket: The bonnet gasket creates a leakproof
seal between the bonnet and body.
1
19. & 20. Bonnet Studs & Nuts: The bonnet studs and
4
nuts secure the bonnet to the body.
21. Seat Ring: To ensure a stable shutoff, the seat ring is
aligned and seal-welded into the valve, then precision ground for
optimal seating.
22. Disc Guide: The disc guides provide a stable track for
21
keeping the disc aligned with the seat during cycling.
23. Spacer Ring: Assists the packing rings in creating a seal
above the back seat, between the bonnet and stem.
6
5
54
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Cast Steel Bolted Bonnet Angle Stop Checks
Styles: CB2, CB3, & CB4/2
Class: 150 - Sizes: 2” thru ?”
Pressure Class Range: 150 thru 600
Design and Manufacturing Standards
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
C
B
(open)
D
A
Component
Body
Seat Ring
Disc
Disc Nut
Stem
*Bonnet Gasket
Bonnet
Bonnet Studs
Bonnet Nuts
Back Seat Bushing
Spacer Ring
Size
A
B
C
D
RF
Wt.
nps
dn
in
mm
in
mm
in
mm
in
mm
lbs
kg
Typical Bill of Materials (See page 5 for available materials.)
CB2
2
50
4.0
107
15.2
386
8
203
6
152
57
125
CB3
CB4/2
ASTM A216 GR.WCB
ASTM A105
ASTM A276 - 410
ASTM A276 - 410
ASTM A182 F6a
Spiral Wound 316 Stainless Steel/Graphite
ASTM A216 GR.WCB
ASTM A193 GR.B7
ASTM A194 GR.2H
Component
Packing
Gland Bolt Pins
Gland Bolts
Gland
Gland Flange
Gland Bolt Nuts
Stem Nut
Split Ring
Handwheel
CB2
CB3
CB4/2
Die Formed Graphite with Braided Graphite End Rings
Commercial
ASTM A193 GR.B7
ASTM A276 - 410
ASTM A216 GR.WCB
ASTM A194 GR.2H
ASTM A439 GR.D-2
N/A
ASTM A539 Type 60-40-18
ASTM A276 - 410
ASTM A276 - 410
Handwheel Nut
Handwheel
Commercial
Commercial
3
75
4.75
121
16.9
429
10
254
7.5
191
84
185
4
100
5.75
146
20.4
518
12
305
9
229
141
310
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Class 150
6
150
8.0
203
21.8
554
15
381
11
279
234
515
55
8
200
9.75
248
27.4
696
18
457
13.5
343
399
878
10
250
12.25
311
31
787
22
559
16
406
611
1344
12
300
13.75
349
37.8
960
24
610
19
483
794
1747
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Cast Steel Bolted Bonnet Angle Stop Checks
Styles: CB2, CB3, & CB4/2
Class: 300 - Sizes: 2” thru ?”
Pressure Class Range: 150 thru 600
Design and Manufacturing Standards
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
C
B
(open)
D
A
Component
Body
Seat Ring
Disc
Disc Nut
Stem
*Bonnet Gasket
Bonnet
Bonnet Studs
Bonnet Nuts
Back Seat Bushing
Spacer Ring
nps
Size
dn
in
A
mm
in
B
mm
in
C
mm
in
D
mm
RF lbs
Wt. kg
Typical Bill of Materials (See page 5 for available materials.)
CB2
2
50
5.25
133
15
381
10
254
6.5
165
68
150
CB3
CB4/2
ASTM A216 GR.WCB
ASTM A105
ASTM A276 - 410
ASTM A276 - 410
ASTM A182 F6a
Spiral Wound 316 Stainless Steel/Graphite
ASTM A216 GR.WCB
ASTM A193 GR.B7
ASTM A194 GR.2H
Component
Packing
Gland Bolt Pins
Gland Bolts
Gland
Gland Flange
Gland Bolt Nuts
Stem Nut
Split Ring
Handwheel
CB2
CB3
CB4/2
Die Formed Graphite with Braided Graphite End Rings
Commercial
ASTM A193 GR.B7
ASTM A276 - 410
ASTM A216 GR.WCB
ASTM A194 GR.2H
ASTM A439 GR.D-2
N/A
ASTM A539 Type 60-40-18
ASTM A276 - 410
ASTM A276 - 410
Handwheel Nut
Handwheel
Commercial
Commercial
3
75
6.25
159
16.9
429
12
305
8.25
210
108
238
4
100
7
178
21.7
551
14
356
10
254
198
436
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
Class 300
6
150
8.75
222
28
711
17
432
12.5
318
392
862
56
8
200
11
279
30.7
780
24
610
15
381
560
1232
10
250
12.25
311
37.5
953
24
610
17.5
445
934
2055
12
300
14
356
41.6
1049
27
686
20.5
521
1288
2837
www.NewmansValve.com
Toll Free: 800.231.3505
Newco Cast Carbon Steel Bolted Bonnet Valves
Product Line Technical Data
Design and Manufacturing Standards
Cast Steel Bolted Bonnet Angle Stop Checks
Valve Design: ASME B16.34/API 600
Flange Dimensions: ASME B16.5, B16.47 (Series A)
Face-to-Face Dimensions: ASME B16.10
Tested in Accordance with: API 598
Recommended Spare Parts*
Styles: CB2, CB3, & CB4/2
Class: 600 - Sizes: 2” thru ?”
Pressure Class Range: 150 thru 600
C
B
(open)
D
A
Component
Body
Seat Ring
Disc
Disc Nut
Stem
*Bonnet Gasket
Bonnet
Bonnet Studs
Bonnet Nuts
CB2
Back Seat Bushing
Spacer Ring
nps
Size
dn
in
A
mm
in
B
mm
in
C
mm
in
D
mm
RF lbs
Wt. kg
CB3
ASTM A216 GR.WCB
ASTM A105
ASTM A276 - 410
ASTM A276 - 410
ASTM A182 F6a
Soft Steel Ring Joint
ASTM A216 GR.WCB
ASTM A193 GR.B7
ASTM A194 GR.2H
Typical Bill of Materials (See page 5 for available materials.)
ASTM A276 - 410
ASTM A276 - 410
2
50
5.75
146
18.9
480
8.8
224
6.5
165
79
36
2.5
75
6.5
165
20.9
531
9.8
249
7.5
191
110
50
Note: Dimensions: Inches/Millimeters - Weights: Pounds/Kilograms. Larger sizes
available on request. Dimensions are subject to change without notice.
Rev: 032307.01
CB4/2
Component
Packing
Gland Bolt Pins
Gland Bolts
Gland
Gland Flange
Gland Bolt Nuts
Stem Nut
Split Ring
Handwheel
CB2
CB3
CB4/2
Die Formed Graphite with Braided Graphite End Rings
Commercial
ASTM A193 GR.B7
ASTM A276 - 410
ASTM A216 GR.WCB
ASTM A194 GR.2H
ASTM A439 GR.D-2
N/A
ASTM A539 Type 60-40-18
Handwheel Nut
Handwheel
Commercial
Commercial
Class 600
3
100
7.0
178
19.8
503
11.0
279
8.3
211
141
64
57
4
150
8.5
216
22.2
564
14.0
356
9.0
229
256
116
6
200
11.0
279
28.2
716
17.7
450
14.0
356
640
291
8
250
13.0
330
38.5
978
24.8
630
16.5
419
961
437
www.NewmansValve.com
Toll Free: 800.231.3505
Limited Warranty
Newmans warrants to the original purchaser, for a period of one year from and after the date of delivery to the original customer, that its
products will be free from defects in workmanship and materials, not caused or resulting from improper usage or application, improper
installation, improper maintenance, repair modification or alterations.
In the event the original purchaser shall determine that a product purchased from Newmans shall be defective in workmanship or
materials, the customer shall notify the Newmans Warranty Representative by telephone (713) 675-8631 within 24 hours from such
determination, followed by written notice to such effect within 7 days therefrom, addressed to:
Newmans
1300 Gazin Street
Houston, Texas 77020
In the event Newmans shall determine that the product is defective as a result of factory workmanship, based upon such examination of
the product which Newmans may deem appropriate, Newmans shall thereupon, at its sole option, (a) cause the defective product to be
repaired, (b) replaced with a substantially identical product, or (c) accept the return of a defective product and refund the purchasing price
to the original purchaser. Newmans shall bear all normal surface transportation costs to the original purchaser but shall in no event bear
any installation, re-installation, engineering or other costs incurred in connection with repair or replacement.
Unless Newmans shall have provided engineering and/or suitability of application or installation services for a purchaser, for which a
separate charge shall have been specifically identified and made, the selection, suitability, installation and fitness of all products sold by
Newmans shall be deemed to have been determined exclusively by and within the sole discretion of the purchaser. Accordingly, Newmans
disclaims any obligation, warranty or guarantee in any manner relating to or resulting from the selection, application, suitability, fitness or
installation of its products.
The foregoing constitutes the sole obligation of Newmans with respect to defective products purchased from it and in no manner shall
Newmans assume or be liable for any other expenses, incidental or consequential damages, losses, lost profits, down time or otherwise,
whether directly or indirectly suffered, or in any other manner relating to or as the result of any defect or failure or any product that it
may sell.
Except as otherwise provided herein, NEWMANS MAKES NO WARRANTIES OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED,
OF ANY KIND WHATSOEVER WITH RESPECT TO GOODS AND PRODUCTS SOLD BY IT, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
WITH RESPECT TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO PERSON IS AUTHORIZED TO GRANT OR EXTEND
ANY WARRANTY OR REPRESENTATION ON BEHALF OF NEWMANS OTHER THAN AS SET FORTH HEREIN.
58
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Industry Standards Typically Used
in Valve Manufacturing
(For Reference Only)
ISO 9001: 2000
RWTUV had approved Newmans for design, manufacture, sales, & service of industrial valves under
certificate registration number #05-1026
American Petroleum Institute (API)
API RP 574 (1998) - Inspection practices for piping system components
API 589 (1998) - Fire test for evaluation of valve stem packing
API RP 591 (2003) - Process valve qualification procedure
API 594 (2004) - Check valves-flanged, lug, wafer & buttwelding
API 597 (1981) - Steel venturi gate valves, flanged, buttwelding ends
API 598 (2004) - Valve inspection & testing
API 599 (2002) - Metal plug valves - flanged, welding ends
API 601 (1988) - Metallic gaskets for raised-face pipe flanges & flanged connections (double-jacketed
corrugated & spiral wound)
API 600 (2001) - Bolted bonnet steel gate valves for petroleum & natural as industries “ISO adoption from
ISO 10434”
API 602 (2005) - Steel gate, globe, & check valves for sizes DN100 and smaller for the petroleum &
natural gas industries
API 603 (2001) - Corrosion-resistant, bolted bonnet gate valves-flanged & buttweld ends
API 604 (1981) - Ductile iron gate valves, flanged ends
API 605 (1988) - Large-diameter carbon steel flanges (nominal pipe sizes 26” through 60”, classes 75,
150, 300, 400, 600, & 900 (replaced by ANSI/ASME B16.47)
API 606 (1989) - Compact steel gate valves, extended body (included in API 602) fire test for soft-seated
quarter-turn valves “ISO adoption from ISO 10497-5 2004”
API 607 (2005) - Fire test for soft-seated quarter-turn valves “ISO adoption from ISO 10497-5 2004”
API 608 (2002) - Metal ball valves, flanged, threaded, & welding ends
API 609 (2004) - Butterfly valves-double flanged, lug- & wafer-type
API RP 941 (2004) - Steel for hydrogen service at elevated temperatures & pressures in petroleum
refineries & petrochemical plants
API RP 520 (2000), Part 1 - Sizing, selection & installation of pressure relieving devices in refineries
API RP 520 (2003), Part 2 - Sizing, selection & installation of pressure relieving devices in refineries
devices in refineries
API Spec 6A (2005) - Specification for wellhead & christmas tree equipment
API Spec 6D (2005) - Specifications for pipeline valves
API Spec 14D (1994) - Specifications for wellhead surface safety valves & underwater safety valves for
offshore service
API 5B (2004) - Threading, gauging thread inspection of coring, tubing, & line pipe threads
API 6AM (2003) - Material toughness
API 6FA (1999) - Fire test for valves
API 6FC (1999) - Fire test for valves with backseats
API 6FD (1995) - Specification for fire test for check valves
API Q1 (2003) - Specification for quality programs for the petroleum, petrochemical, & natural gas
American Society of Mechanical Engineers (ASME)
ASME Code (1997 addenda) - Boiler & pressure vessel code
ASME A13.1 (1996) - Scheme for the identification of piping systems
ASME B1.1 (2003) - Unified inch screw threads, UN, & UNR thread form
ASME B1.5 (1997) - ACME screw threads
ASME B1.7M (1984) - Nomenclature, definitions, & letter symbols for screw threads
ASME B1.8 (1988) - Stub ACME screw threads
ASME B1.12 (1987) - Class 5 interference - fit thread
ASME B1.20.1 (1983) - Pipe threads, general purpose, inch
ASME B1.20.3 (1976) - Dry-seal pipe threads, inch
ANSI/ASME B16.1 (1998) - Cast iron pipe flanges & flanged fittings
ANSI/ASME B16.5 (2003) - Pipe flanges & flanged fittings: NPS 1/2” through 24”
ASME B16.9 (2003) - Factory made wrought steel buttwelding fittings
ANSI/ASME B16.10 (2002) - Face-to-face & end-to-end dimensions of valves
ASME B16.11 (2001) - Forged fittings, socket welding & threaded
ASME B16.20 (1998) - Metallic gaskets for pipe flanges: ring joint spiral wound & jacketed
ASME B16.21 (2005) - Non-metallic flat gaskets for pipe flanges
ASME B16.25 (2003) - Buttwelding ends
ANSI/ASME B16.33 (2002) - Manually operated metallic gas valves for use in gas piping systems up to
125 PSI (sizes NPS 1/2” through 2” )
ANSI/ASME B31.1 (2004) - Power piping
ANSI/ASME B31.3 (2004) - Process piping
ANSI/ASME B16.34 (2004) - Valves flanged, threaded & welding end
ANSI/ASME B16.36 (1996) - Orifice flanges
ANSI/ASME B16.38 (1985) - Large metallic valves for gas distribution (manually operated, NPS
2-1/2” through 12”, 125 PSIG maximum)
ANSI/ASME B16.42 (1998) - Ductile iron pipe flanges & flanged fittings: classes 150 & 300
ANSI/ASME B16.47 (1996) - Large diameter steel flanges
ANSI B17.1 (1967, R’ 89) - Keys & keyseats
ANSI B18.2.2 (1987) - Square & hex nuts
ASME B31.4 (2002) - Pipeline transportation systems for liquid hydrocarbons & other ammonia & alcohols
ANSI/ASME B31.8 (2003) - Gas transmission & distribution piping systems
ANSI/ASME B36.10 (2004) - Welded & seamless wrought steel pipe
ANSI/ASME B36.19 (2004) - Stainless steel pipe
ANSI FCI-2 (1991) - Control valve seat leakage
American Society Non-destructive Test (ASNT)
ASNT-TC-1A (1996) - Recommended practice no. SNT-TC-1A 1996
American Society for Testing and Materials (ASTM)
British Standards Institute (BS)
BS 1414 (1975, R’ 91) - Gate, wedge & double disk valves: steel
BS 1868 (1975, R’ 91) - Check valves: steel
BS 1873 (1975, R’ 91) - Globe & check valves: steel
BS 2080 (1989) obsolete - Flanged & buttweld end steel valves
BS 5146 - (withdrawn) Replaced by BS 6755 p.1 steel valves testing (1986) & BS 6755 p.2 (1984)
BS 5152 (1974, R’ 91) - Globe & check: cast iron
BS 5153 (1974, R’ 91) - Check: cast iron
BS 5159 (1974, R’ 91) - Ball: cast iron & carbon steel
BS 5160 (1974, R’ 91) - Globe & check: steel
BS 5163 (1986, R’ 91) - Gate, wedge & double disk: cast iron
BS 5351 (1986, R’ 91) - Ball: steel
BS 5352 (1986, R’ 91) - Globe & check: steel
BS 5418 - (withdrawn) Replaced by BS EN 19 (1992) marking: general purpose industrial
BS 5840 (1980, R’ 91) - Valve mating details for actuator operation
BS 6364 (1984, R’ 91) - Cryogenic
BS 6683 (1985, R’ 91) - Guide: installation & use of valves
BS 6755: Part 1 (1986, R’ 91) - Specification for production pressure testing requirements
BS 6755: Part 2 (1987) - Specification for fire type-testing requirements
BS EN 19 (1992) - Marking of general purpose industrial valves
Canadian Standards Association
B51-97 - Boiler, pressure vessel, & pressure piping code
Z245.15-96 - Steel valves
CAN3-z299.4-85 (reaffirmed 1997) - Quality assurance program - Category 4
CAN3-z299.3-85 (reaffirmed 1997) - Quality assurance program - Category 3
International Organization for Standardization
ISO 5211/1 (2001) - Industrial valves- part-turn actuator attachments
ISO 5211/2 (2001) - Part-turn valve actuator attachment-flange & coupling performance characteristics
ISO 5211/3 (2001) - Part-turn valve actuator attachment-dimensions of driving components
ISO 5752 (1982) - Metal valves for use in flanged pipe systems face-to-face & center-to-face dimensions
ISO 9000 (2005) - Quality management systems and fundamentals & vocabulary
ISO 10012-1 (1992) - Quality assurance requirements for measuring equipment
Manufacturers Standardization Society
SP-6 (2001) - Standard finishes for contact faces of pipe flanges & connecting-end flanges of valves &
fittings
SP-9 (r2005) - Spot facing for bronze, iron & steel flanges
SP-25 (1998) - Standard marking system for valves, fittings, flanges & unions
SP-42 (2004) - Class 150 corrosion resistant gate, globe, angle, & check valves with flanged & buttweld ends
SP-44 (2001) - Steel pipeline flanges
SP-45 (2003) - Bypass & drain connections
SP-51 (2003) - Class 150/w corrosion resistant cast flanges & flanged fittings
SP-53 (2002) - Quality standard for steel castings & forgings for valves, flanges, & fittings & other piping
components: magnetic particle exam method
SP-54 (2002) - Quality standard for steel castings for valves, flanges, & fittings and other piping
components: radiographic examination method
SP-55 (2001) - Quality standard for steel castings for valves, flanges other piping components-visual
method for evaluation of surface irregularities
SP-60 (2004) - Connecting flange joint between tapping sleeves & tapping valves
SP-61 (2003) - Pressure testing of steel valves
SP-65 (2004) - High pressure chemical industry flanges & threaded stubs for use with lens gaskets
SP-67 (2000A) - Butterfly valves
SP-69 (2003) - ANSI/MSS edition pipe hangers & supports, selection & application
SP-70 (1998) - Cast iron gate valves, flanged & threaded ends
SP-71 (1997) - Gray iron swing check valves, flanged & threaded ends
SP-72 (1999) - Ball valves with flanged or butt-welding ends for general service
SP-79 (2004) - Socket-welding reducer inserts
SP-81 (2001) - Stainless steel, bonnetless, flanged knife gate valves
SP-82 (1992) - Valve pressure testing methods
SP-84 (1990) - Valves - socket welding & threaded ends
SP-85 (2002) - Cast iron globe & angle valves, flanged & threaded ends
SP-86 (2002) - Guidelines for metric data in standards for valves, flanges, fittings & actuators
SP-88 (r2001) - Diaphragm valves
SP-91 (1992) - Guidelines for manual operation of valves
SP-92 (1999) - MSS valve user guide
SP-93 (r2004) - Quality standard for steel castings & forgings for valves, flanges & fittings & other piping
components- liquid penetrant exam method
SP-94 (r2004) - Quality standard for ferritic & martensitic steel castings for valves, flanges, & fittings and
others piping components - ultrasonic exam method
SP-96 (r2005) - Guidelines on terminology for valves & fittings
SP-98 (2001) - Protective coatings for the interior of valves, hydrants, & fittings
SP-99 (r2005) - Instrument valves
SP-101 (r2001) - Part-turn valve actuator attachment-flange and driving component dimensions &
performance characteristics
SP-102 (r2001) - Multi-turn valve actuator attachment: flange and driving component dimensions &
performance characteristics
SP-110 (1996) - Ball valves threaded, socket-welding, solder joint, grooved, & flared ends
SP-117 (2002) - Bellows seals for globe & gate valves
SP-118 (2002) - Compact steel globe and check valves-flanged, flangeless, threaded & welding ends
(chemical & petroleum refinery service)
SP-120 (2002) - Flexible graphite packing system for rising stem steel valves (design requirements)
SP-121 (R2002) - Qualification testing methods for stem packing for rising stem steel valves
National Association of Corrosion Engineers (NACE)
MR0175 (2005) - Sulfide stress cracking resistant metallic materials for oil field equipment
MR0103 (2005) - Materials resistant to sulfide street cracking in corrosive petroleum refining environments
59
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
Terms & Conditions
3) Failure of Any Party to Enforce
The failure of either party to enforce any provision hereof will not constitute a waiver or
preclude subsequent enforcement thereof.
Definitions
4) Invalidity of Any Term or Condition Contained Herein
No partial invalidity of this Contract will affect the remainder. In the event that any term or
condition contained herein is found to be invalid, the parties agree that the remainder of
Supplier’s contract shall remain valid.
1) Supplier
“Supplier” refers to NEWCO Valves LP dba NEWMANS, a Texas (USA) limited partnership, and
all of its affiliated or related entities, including, but not limited to, its parent, subsidiary, affiliated
companies, their officers, directors, employees and agents, individually and collectively.
2) Customer
“Customer,” refers to all of the following:
a) any party acting as agent for the Customer, the party ordering goods or services on behalf
of himself, herself or itself and others;
b) the person signing Supplier’s credit application, service order, bill of lading, delivery receipt
or ticket;
c) the store, factory, warehouse, shipping company, accepting agent, contractor or
subcontractor of the job site, store, warehouse, transportation company, accepting agent;
d) the person accepting and/or ordering Supplier’s goods and services acknowledges that
he or she has the actual and apparent agency authority to bind the Customer and owner
of the property the product will improve, to the terms and conditions of this agreement, all
of whom are included in the term “Customer”; and
e) the person paying the invoices of Supplier, signing Supplier’s service orders, delivery
tickets, bills of lading or other Supplier contracts, acknowledges that he or she is the agent
of the Customer and/or any entity who is benefited by the Supplier’s product, and that they
are said person’s agent.
3) Equipment
“Equipment” refers to any goods and service, item of supply or equipment or property ordered
or purchased by Customer or the Customer’s agent from Supplier or provided by Supplier,
including, but not limited to: valves, pipe, fittings, product or general equipment, supplies,
parts, materials, supplies and/or merchandise sold by Supplier or provided in connection with
Supplier’s provider capabilities or needed by Supplier to assist Supplier in the performance and
delivery of its product to Customer, but “Equipment” excludes “Services” as defined below.
4) Services
“Service(s)” refers to all employees or agents furnished by Supplier as consultants and/or to
perform any function, including the operation of equipment which performs any function,
trucks or other merchandise necessary to perform any function when operated by Customer’s
employees or agents or the Supplier’s employees or agents on Customer’s job or to satisfy the
Customer’s order or orders.
5) Claims
“Claim(s)” refers to all of the following:
a) any liability of Supplier to Customer; b) loss of equipment, time, money, or profit of Supplier;
and c) claim, demand, cause of action, proceeding, damage to person, damage to personal
or real property, damage and penalty, including attorney’s fees, costs and expenses.
6) Price Book, Price List, Manual, & Credit Application
Customer agrees to be bound by all relevant provisions of the following:
a) “Supplier’s Price Book” and “Price Book” refer to the current book published by Supplier
which may list the Supplier’s contractual terms and conditions, lists prices for Equipment
and Services offered by Supplier, including all amendments;
b) “Supplier’s Manual,” “Manual” and “Employee Manual” refer to any manual of Supplier
governing, which may contain its contractual terms and conditions, the procedures for
pricing Equipment and Services of Supplier, or the manner in which Supplier is to provide
goods or services plus all amendments and updates. Customer agrees to be bound by
such terms and conditions, procedures; and
c) “Supplier’s Credit Application” and “Credit Application” refer to any application or request
submitted by Customer to Supplier for the purpose of seeking the extension of credit by
Supplier and which may contain the Supplier’s terms and conditions all of which shall be
binding on the Customer.
General Terms & Conditions
Customer acknowledges that it has reviewed and agrees to be bound by the above and
following (Definitions, Terms and Conditions and all of the language contained herein and in
related documents described elsewhere herein) whenever it or its employees, transportation
and/or warehouse company, its customer or end user, and/or agent either: i) accepts the
Equipment or Services of Supplier; or ii) signs a Credit Application, service order, delivery ticket,
bill of lading or contract for goods or services; or iii) receives an invoice from Supplier and/or
orders more Equipment or Services from Supplier.
1) Entire Contract
The Terms and Conditions herein, in the invoice, acknowledgement or acceptance of
Customer’s order, Price Book, Manual and Credit Application as defined above and elsewhere
herein, the other documents aforementioned, all of which are incorporated herein by reference
for all purposes, constitute the entire contract (“Contract”) between the parties and may not be
amended except in writing signed by Supplier’s authorized representative.
2) Controlling Terms and Conditions
Equipment or Services furnished to Customer by Supplier or its agents will be controlled only
by the Terms and Conditions contained herein and contained in the other documents of
Supplier mentioned herein and these are the only terms and conditions to which these parties
shall be bound. In the event that Customer writes any letters or uses any other document
generated by Customer to order or accept Supplier’s Equipment or Services, the Terms and
Conditions contained herein shall control and this document does hereby serve as an objection
thereto.
5) Jurisdiction and Venue; Construction of Terms and Conditions
The Parties hereto agree that the terms and conditions of Supplier’s documents mentioned
herein and the Terms and Conditions of this document shall be construed in accordance with
the laws of the State of Texas or, if offshore, in accordance with General Maritime Law of the
United States, without giving effect to respective conflicts of law principals, or Supplier at its
exclusive option may choose the Jurisdiction to interpret the terms and conditions contained
herein and in the other documents mentioned herein. In the event of litigation between
Customer and Supplier, Customer hereby waives any claim it may have to any jurisdiction and
venue other than that chosen by Supplier. Customer agrees that it is to perform its obligations
herein in Houston, Harris County, Texas, non-exclusively to include payment. Canada: Whenever
the facts of a particular contract would in the sole opinion of the Supplier be best litigated in
Canada, the parties agree that Supplier can choose that jurisdiction and that Supplier can
choose any venue it deems appropriate in Canada. All the other terms and conditions
contained in this document shall then apply in Canada as if this agreement was in the United
States of America.
6) Credit
Terms are cash in advance unless credit is approved in writing prior to the sale. If credit is
approved, Customer must maintain credit satisfactory to Supplier. When Customer or its agent
signs any of Supplier’s documents in the process of ordering or receiving Equipment or
Services from Supplier, it states for Supplier’s reliance that it has the current ability to pay for
the Equipment or Services ordered or accepted and it further agrees that Supplier reserves the
right to require Customer to furnish security for performance of Customer’s obligations.
Payments shall be made in U.S. Dollars net 30 days at Supplier’s address in Houston, Harris
County, Texas. If credit terms are not met or Customer otherwise fails to follow the Terms and
Conditions contained herein, in addition to its other legal rights, Supplier may and Customer
hereby authorizes Supplier to: a) defer or cancel further shipments of Equipment or Services
and/or otherwise decline to provide its product to Customer; b) enter upon any property or job
site on which the Equipment of Supplier is located by taking any necessary action, including,
but not limited to, opening gates, cutting locks, cutting chains; c) authorize any other company
to remove its equipment from any location, to the extent needed for Supplier to be able to
remove its equipment, and said company moving its equipment shall send its bill for the same
to Customer or Supplier may pay said bill and include the same in its bill to Customer; d) take
any action needed to remove its equipment from the job site; e) act as stated herein at the
expense of Customer and Customer hereby indemnifies and holds harmless Supplier from any
harm arising from said actions, including, but not limited to, environmental harm, harm to the
real property and personal property and harm to the real and personal property of any third
party; and f) charge Customer interest on any unpaid balance at the lesser of: i) eighteen
percent (18%) per annum, or ii) the maximum rate permitted by applicable law.
7) Taxes
Customer shall be responsible for all customs fees, duties, and foreign, federal, state or local
taxes (including, sales, use, excise or similar taxes and foreign withholding taxes).
8) Transportation
For Equipment sold, Customer may arrange shipment and will pay all crating, handling and
shipping costs. Risk of loss passes to Customer at the time Customer and/or any carrier takes
possession of the Equipment from Supplier. For Equipment sold where Customer does not
timely furnish shipping instructions or requests that Supplier arrange shipment, such
transportation shall be in a commercially reasonable manner at Customer’s risk and invoiced
to Customer at current freight rates, plus all handling incurred, or at the prevailing mileage rate
for any vehicles used by Supplier’s personnel. Risk of loss will then pass to Customer at the
time the Equipment leaves Supplier’s premises, warehouse or store. All claims for shortages,
damages, corrections or deductions must be made in writing within 10 days from receipt of
goods and if shipper fails to comply, it waives its right to make a claim.
9) Consequential and Incidental Damages
Supplier will not be responsible for consequential or incidental damages of any kind, which
shall include, but not be limited to, loss of profits, use or business opportunity, damages for
failure to meet deadlines, pollution damage and/or wreck or debris removal expense and
Customer holds harmless and indemnifies Supplier from all harm arising from any claims
made against Supplier from out of any of these things.
10) Force Majeure
Supplier will not be liable for any damages, including special and consequential damages, as
stated above, caused by events of force majeure or any other occurrences beyond Supplier’s
reasonable control subject to all of the limitations contained herein. In such event, the time for
performance will be extended automatically for such reasonable time as is necessary to permit
performance hereof.
11) Disclaimer Of All Warranties Except Those Specifically Granted Herein Supplier hereby
disclaims all warranties except those specifically granted and states as follows:
a) Supplier makes no warranties of any kind regarding its equipment and/or services;
b) technical information and any assistance in equipment installation or technical or
engineering information concerning equipment or services provided by Supplier will be
advisory only, at Customer’s sole cost and on an “as is” basis;
c) no warranty is given with respect to such services or information and Supplier will not be
liable for any claims arising from its furnishing or Customer’s use of such assistance or
information;
d) Supplier specifically disclaims all implied warranties, the warranty of merchantability,
warranty of fitness for a particular purpose and any warranty that the equipment or service
provided by Supplier will actually accomplish the goal(s) desired by Customer. Supplier
grants to Customer only a limited warranty as follows: Supplier grants only to Customer
only a 1-year warranty on material and workmanship on its new products commencing at
date of shipment.
60
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
12) Insurance
The parties agree that the indemnities provided by Customer to Supplier herein shall be
supported either by available insurance or that Customer shall voluntarily become self-insured,
in whole or part and upon request of Supplier prove that Customer is good for the loss and that
Customer is sufficiently self insured. In addition, Customer shall, at its expense, maintain
adequate insurance to fully protect any Equipment or Services or personnel supplied by
Supplier and shall supply to Supplier, upon request, satisfactory evidence of sufficient
insurance coverage to protect Supplier, Supplier’s property, Supplier’s personnel and
Supplier’s liability.
13) Prices
All Supplier’s, terms, conditions, prices, rates and charges are subject to change without notice.
14) Assignment
Customer may not assign any rights or obligations hereunder, without Supplier’s prior written
consent.
15) Amendment of Indemnities to Conform to Law
The indemnities provided by Customer herein shall be limited to the extent necessary for
compliance with applicable state and federal laws.
16) Termination/Cancellation
Unless provided otherwise in writing herein, Customer cannot terminate or cancel any order
once Supplier has accepted the order. No termination shall relieve Customer of any liability
incurred and Customer’s obligations shall survive such termination, including all hold harmless
and all indemnities and all warranties & non-warranties contained herein which are made
expressly for the benefit of Supplier.
a) Termination Policy: No goods or products supplied pursuant hereto maybe returned
without Supplier’s written permission. Supplier assumes no responsibility without
Supplier’s written permission. All returns shall be made freight prepaid. Supplier will
charge to Customer a 25% Restocking Charge upon the return of goods by Customer.
b) Special Orders: A special order is an order for any product of Supplier or which comes from
Supplier’s sources which is non standard requiring separate/additional manufacturing,
engineering, modification, tooling and machining. If Supplier agrees in writing that a Special
Order can be terminated, Special Orders cannot be cancelled unless Customer agrees in
writing to pay for all work including engineering completed up to the time of cancellation.
17) Default
If Customer ever defaults on or breaches any Term or Condition contained herein or in any
other document of Supplier mentioned above, all charges for all Equipment and Services
provided by Supplier for Customer’s benefit shall automatically accelerate and shall
immediately become due and payable, notwithstanding any other provision which would afford
Customer, under normal circumstances, any stated amount of time in which to pay for said
charges. In addition, all discounts which may have been offered to Customer shall automatically
and immediately be revoked and become fully due and owing with no action or notice from
Supplier, notwithstanding any other provision to the contrary. If Customer ever disputes any
charges of Supplier, Customer shall tender to Supplier all amounts for all charges which are
not disputed by Customer. Customer hereby indemnifies and holds Supplier harmless for and
agrees to reimburse Supplier for all costs of collections, including, but not limited to, actual
attorney’s fees and costs incurred in connection with the collection of past due amounts and
defending against any counterclaims. Notwithstanding any other provision in this document or
any other document or check, Customer agrees that all payments received by Supplier on
Customer’s account may be applied first to all outstanding interest and then to the oldest
amounts owed by Customer to Supplier, and this provision is not waived by Supplier by
accepting any check from Customer containing contrary language.
18) Customer Holds Harmless and Indemnifies Supplier
Customer shall hold harmless, defend, indemnify, release and hold Supplier harmless from
and against any and all claims by Customer, Customer’s customer, owner, or any other person
or entity against Supplier of every kind or character, whatsoever, whether such claims are
based on theories of contract law, tort law, or otherwise, direct or indirect, including incidental,
special and consequential damages caused by Supplier arising out of delivery, pick-up, repair,
use or operation of equipment or services relating to execution, completion or termination of
this contract or on account of bodily injury or death or property damage, destruction or
economic loss (including , but not limited to release of radioactive materials, contamination or
damage to real property or personal property, land, buildings, vehicles, or property rights)
because of purchase, delivery, installation, possession, operation, use, condition or return of
goods, people, services and/or equipment used, purchased, or used during the term of this
contract, or on account of infringement of any patent, design, copyright, or trade name or
mark, whether by Supplier, Customer or otherwise, irrespective of whether Supplier was
concurrently negligent or at fault for any such claims where the damage, injury or death was
caused by the sole or partial negligence of Supplier.
19) Inspection
Customer’s acceptance of delivery and signature of its representative on any delivery tickets
or other Supplier documents is conclusive evidence that Customer found the Equipment to be
suitable for its needs and in good condition and that the signor was the agent for Customer or
Customer’s Customer, building or land owner, contractor, sub contractor and operator.
Customer also has a duty to inspect Equipment prior to use and to notify Supplier immediately
of any defects and before use of the Supplier’s product. SALE TERMS: The following are in
addition to and a part of all other Terms and Conditions provided for herein.
20) Limited Liability/Disclaimer
a) Supplier does warrant Equipment sold by Supplier to Customer to be free from defects in
material or workmanship.
b) In the event that a court finds that Supplier is liable for any breach of contract or any
breach of warranty, Supplier’s liability for said breach is expressly limited to the repair or
replacement, at its sole option, of any Equipment which proves to be defective during any
period declared by the court to be a period of warranty. All such Equipment shall be
repaired or replaced F.O.B. Supplier’s plant, warehouse, store or premises.
c) In the event that a court finds that Supplier has an obligation to repair or replace
equipment, said repair or replacement constitutes agreed and liquidated damages for any
breach of Supplier’s actual or court-declared warranty.
d) The remedies stated above for any such breach thereof, shall be in lieu of all other
warranties, express or implied, including all other warranties for merchantability or fitness
for any particular purpose which Supplier has specifically disclaimed herein, and in lieu of
liability for Supplier’s negligence or fault and Customer’s rights and remedies under the
texas deceptive trade practices consumer protection act (chapter 17, texas business and
commerce code).
21) Prices
a) Prices for standard equipment will be the sales price shown on Supplier’s current product
sales price list (“Price List”) or Price Book, F.O.B. Supplier’s plant, warehouse, district stock
points, or premises.
b) Requests for quotations for nonstandard Equipment should be sent to the appropriate
Supplier office. Quoted prices are valid for 30 days after the date of the quotation, unless
otherwise noted on the quotation or unless canceled by Supplier prior to Customer’s
acceptance.
c) Cost of additional labor, materials or outside services for modification of such procedures
or specifications requested by Customer will be charged to Customer at Supplier’s
prevailing rate.
d) Services required to install Equipment will be based on the prevailing rates at the time of
installation.
22) Delivery/Disclaimer
a) Supplier will use its best efforts to have Equipment ready for shipment, subject to receipt of
all necessary Customer information, including approved drawings. HOWEVER, SUPPLIER
ASSUMES NO LIABILITY FOR DAMAGES INCURRED AS A RESULT OF ITS LATE DELIVERY OF
EQUIPMENT, SUPPLIES, PRODUCT, PERSONAL PROPERTY, REGARDLESS OF CAUSE.
b) Title and risk of loss will pass to Customer upon delivery of Equipment, F.O.B. Supplier’s
plant, warehouse or premises.
c) If unable to deliver, Supplier may charge Customer its customary storage rates and
Customer will maintain all-risk property insurance on Equipment, at its replacement value.
Supplier will not be liable for deterioration of Equipment, personal property, product
resulting from atmospheric conditions, acts of God, or other events regardless of whether
they are within Supplier’s reasonable control while in Supplier’s possession or in transit to
Customer’s destination or location.
Service Terms
The following are in addition to and a part of all other Terms and Conditions provided for herein.
1) Limited Liability/Disclaimer
a) Supplier will use its best efforts to ensure that all personnel furnished are competent and
that Equipment, supplies, personal property or product furnished is in good condition;
however, Customer agrees that the Equipment and personnel come without warranty or
guarantee of any kind whatsoever except as provided herein.
b) Supplier’s personnel will attempt to perform the work requested by Customer; however,
because of the nature of the work to be accomplished and because of the unpredictable
conditions which always exist, such results as required by Customer or Customer’s
Customer cannot be and are not guaranteed or warranted and Customer agrees that
Supplier makes no warranties of any kind and that Supplier does not guarantee any
particular result as from furnishing people, goods, product, personal property, equipment
or services.
c) Supplier reserves the right not to do work if, in its sole discretion, job conditions render
such action inadvisable for any reason or unsafe for any reason.
d) Customer agrees that any employee(s) furnished by Supplier shall not be responsible for
any final decision made on any job. Rather, Customer shall retain complete control and
supervision of the job, building site, project and performance of operations in and about
the job site.
e) Customer shall pay Supplier for Equipment and Services regardless of whether the desired
results are achieved without any deduction or offset of any kind, irrespective of any Claims
which Customer may assert or allege against Supplier or any Supplier and/or manufacturer
of Equipment and/or Services, at the rates indicated in the Customer’s document, manual,
delivery documents or Price Book in effect at the time of delivery.
f) Customer will be invoiced at the sales rate or service rates in effect at the beginning of the
invoice period.
g) Supplier makes no warranty or representation of any kind, express or implied, as to the
quality, performance or function of its people, as to the design, operation, condition or
quality of the material or workmanship of equipment or performance of equipment
delivered to Customer, it being agreed that all such risks as between Supplier and
Customer are to be borne by Customer, regardless of whether such equipment is operated
under Supplier’s supervision, and all equipment, services and people are accepted by
Customer “as is” except as provided elsewhere herein. Customers desiring different
standards than those contained herein should, at Customer’s expense, obtain an
inspection of goods, services, equipment and people prior to use and the benefits of any
and all implied warranties of Supplier are hereby waived by Customer except as elsewhere
provided herein.
2) Charges
All charges are on a daily basis for a 24-hour day or any part stated therein.
a) Services
i) all Services are on a daily or hourly basis, subject to any minimum charge, all of which are
specified by Supplier in Supplier’s documents mentioned herein;
ii) charges begin when each Service person departs Supplier’s store location where said
person or Equipment is based and the charges shall continue until returned to that store;
iii)Customer shall furnish quarters and meals for Supplier’s personnel or reimburse Supplier
for reasonable living expenses incurred at the prevailing rate from the time each Service
person leaves the Supplier’s location until return to Supplier’s location;
iv)if personnel and/or Equipment are dispatched at Customer’s request, but are later
canceled, Customer will be invoiced for a “dead call” as provided in the Price Book or
other Supplier documents mentioned herein.
b) Standby Charges: Standby rates may be applied under conditions specified in the Price
Book.
3) Trade Discount
Trade discounts, if any, apply only to Equipment, goods, or services which are paid for within
30 days of the invoice date. In the event payment is not timely made, with time being deemed
to be of the absolute essence, all discounts granted are automatically revoked and reversed on
Customer’s account and are fully due and owing.
61
Rev: 032307.01
www.NewmansValve.com
Toll Free: 800.231.3505
The Reliable Source
Manufacturer of
w w w . n e w m a n s v a l v e . c o m
Corporate Headquarters
Houston - Texas
1300 Gazin St.
Houston, TX 77020
Tel: 713.675.8631
Fax: 713.675.1589
Toll Free: 800.231.3505
California
1539 Del Amo Blvd.
Carson, CA 90746
Tel: 310.667.8570
Fax: 310.878.0355
New Jersey
19A Cotters Lane
East Brunswick, NJ 08816
Tel: 732.257.0300
Fax: 732.238.0132
New Jersey Automation Branch
P.A.S.
9 Joanna Court
East Brunswick, NJ 088
Tel: 732.257.0300
Fax: 732.238.0132
Edmonton
9555 - 12 Ave. SW
Edmonton, AB T6X 0C6
Canada
Tel: 780.464.3500
Fax: 780.467.0376
Toll Free: 800.661.7326
Barrie
P.O. Box 881
92 Davidson St.
Barrie, Ontario L4M 4Y6
Canada
Tel: 705.737.4216
Fax: 705.737.5156
Toll Free: 800.461.4430
China
Suite 1003A, Jinying Tower A
No. 1518 Minsheng Road
Pudong, Shanghai CHINA 200135
Tel: ++ 86 21 6104 9569
Fax: ++ 86 21 6104 9579
“Quality in Design”
“Durability in Construction”
Toll Free: 800.231.3505
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement