Compaq | BL10e - ProLiant - G2 | DA - 11686 - Worldwide

DA - 11686 - Worldwide
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Overview
ProLiant BL e-Class Server Blade Enclosure
(shown with 20 ProLiant BL10e server blades)
ProLiant BL10e Generation 2 (G2) Server Blade
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 1
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Overview
What's New
One Ultra-Low Voltage Intel® Pentium® M 1GHz processor with 1-MB L2 cache
Support for DDR memory
ProLiant BL10e G2 Server Blade includes:
One Ultra-Low Voltage ULV Intel Pentium M processor with 1-MB L2 cache (400-MHz front side bus)
ServerWorks GC-SL chipset
512-MB C2100 Registered ECC DDR DIMM Memory standard expandable to 1024MB (2 DIMM slots)
Two NC3163 Fast Ethernet NIC PCI 10/100 full WOL and PXE Integrated
One 40-GB Ultra ATA/100 hard drive
Server blades protected by HP Services, including a limited one year parts warranty with optional service uplifts available
ProLiant BL e-Class Server Blade Enclosure includes:
3U high rack-mountable chassis with 20 server blade bays
Can be purchased with 20 licenses for new ProLiant Essentials Rapid Deployment Pack at 50% of standard license list price!
Dual, 1+1 redundant hot-plug power supplies
Four, 2+2 redundant hot-plug fans
Three available interconnect options: C-GbE Interconnect Switch; RJ-45 Patch Panel; and RJ-21 Patch Panel
Server blade enclosure protected by HP Services, including a limited three year warranty with optional service uplifts available
ProLiant BL e-Class Integrated Administrator features:
Acts as a combination terminal server and remote power controller, enabling out-of-band, secure, serial console connections to all server
blades and the optional interconnect switch
Enclosure, interconnect switch and server blade health monitoring and alerts
Command-line and browser-based management interfaces, including access permissions, for the server blades and the enclosure
Provides access to the interconnect optional switch management interfaces
SNMP, web and scriptable command-line interfaces
PLUS
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 2
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Overview
PLUS
or
a. C-GbE Interconnect Switch
or
b. RJ-45 Patch Panel
c. RJ-21 Patch Panel
Configuration Steps
For a complete configuration of the HP ProLiant BL e-Class system, do the following:
1. Select ProLiant BL10e G2 server blades sold [in a single-pack or 10-pack]
PLUS
2. Select Server Blade Enclosures (each can hold up to 20 ProLiant BL10e G2 server blades). The enclosure can be purchased bundled with
20 licenses for ProLiant Essentials Rapid Deployment Pack at 50% of the standard license price.
(NOTE: Rapid Deployment Pack is optimized for configuring and deploying ProLiant BL10e G2 server blades and enable unique features such
as blade "rip and replace" for effortless server redeployment.)
PLUS
3. Select one of the three Interconnect Tray options for each server blade enclosure
(NOTE: Each interconnect tray includes an Integrated Administrator module.):
a. C-GbE Interconnect Switch (with 4 10/100/1000T Gigabit Ethernet
RJ-45 uplinks for up to 40-to-1 network cable reduction!)
OR
b. RJ-45 Patch Panel (with 40 RJ-45 connectors)
OR
c. RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)
(NOTE: If suitable for your environment, select also the RJ-21 to RJ-45 Cable Option kit.)
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 3
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Standard Features
HP ProLiant BL10e G2 Server Blade
Processor
One Ultra-Low Voltage Intel Pentium M 1GHz processor
Cache Memory
1MB Level-2 on-die Cache
Chipset
ServerWorks GC-SL chipset
NOTE: For more information regarding ServerWorks, please see the following URL:
http://www.serverworks.com/products/overview.html
Memory
Standard
512MB PC2100 Registered ECC DDR DIMM Memory standard (1x512 MB)
Maximum
1024 MB (2 DIMM slots total)
Network Controller
Two NC3163 Fast Ethernet NIC PCI 10/100 full WOL and PXE Integrated
Internal Storage
Hard Drive
Warranty
1 year on parts, 9x5 NBD. HP Care Pack warranty upgrades available to add labor, on-site service, faster response
times, and longer terms to the standard server blade warranty.
Form Factor
Server blades plug vertically into HP ProLiant BL e-Class Server Blade Enclosure
Product Demo
To view the Product Demo, please see the following URL, then click on "PRODUCT DEMO":
http://www5.compaq.com/products/servers/proliant-bl/e-class/index.html
One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug hard drive
HP ProLiant BL10e G2 Server Blade
Dimensions
5.25 inch Height (3U), 17.5 inch Width, 28.35 inch Depth
Bays for up to 20 ProLiant BL10e G2 server blades
Rack Capability
Mounts in HP, HP-branded, third-party, and Telco racks. Rack mounting hardware for HP, Compaq-branded and thirdparty racks ships standard with each server blade enclosure. Telco rack-mounting hardware is a separately
available option kit.
Server Blade Enclosure
includes
Rear bay for 1 of 3 Interconnect Tray configurations for network cable management (see below).
Two (2) Diagnostic Adapters for connecting keyboard, video, mouse and other devices locally to individual server
blades
ProLiant Essentials Foundation Pack for ProLiant BL Servers, includes the Insight Managerä 7 and Management
Agents CD and ProLiant Essentials Rapid Deployment Pack CD (trial version - 7-days, 10 nodes).
(NOTE: The ProLiant BL e-Class server blade enclosure can also be purchased bundled with 20 licenses for Rapid
Deployment Pack at 50% of the standard license price.)
Four (2+2 redundant) hot- plug fans
Dual (1+1 redundant) hot- plug power supplies (600 watts each), power cords
Server blade blanks (to fill 19 of the 20 server blade bays)
Rack mounting hardware for HP, Compaq-branded and third-party racks
Null-modem cable for serial connection to the Integrated Administrator serial "Console" connector
HP Documentation CD
Warranty
3 years on parts, labor and on-site service. HP Care Pack warranty upgrades available to add faster response times
to the standard warranty.
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 4
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Standard Features
HP ProLiant BL e-Class Interconnect Trays
NOTE: Each interconnect tray includes the Integrated Administrator module.
Please see the following (3) interconnect tray configurations for accessing server blade network connections:
ProLiant BL e-Class C-GbE Interconnect Switch (with 4 Gigabit Ethernet uplinks for up to 40-to-1 network cable
reduction!)
NOTE: See details below.
RJ-45 Patch Panel (with 40 RJ-45 connectors)
RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)
NOTE: See "Other Options" below for RJ-21 to RJ-45 Cable option kit.
Warranty
3 years on parts, labor and on-site service. HP Care Pack warranty upgrades available to add faster response times
to the standard warranty.
HP ProLiant BL e-Class Integrated Administrator ver. 1.40 Features
Out-of-band local console and remote network access to the server blade enclosure and all 20 server blades
via (one) RJ-45 10/100T Fast Ethernet and (one) RS-232 management connectors
Provides local and remote access to the ProLiant BL e-Class C-GbE Interconnect Switch command console
and browser-based management interfaces
SNMP, Web (via HTTPS) and command-line interfaces (via Console connector, Telnet and Secure Shell)
Remotely power on/off/reboot server blades and enclosures
Remotely toggle on/off unit identification LEDs (UID) of server blades and enclosures
Monitors and controls the enclosure fans, temperature sensors, power supplies, interconnect switch and
server blade status
Connect to each server blade's serial text console for enabling full control over server blade's
Power-On Self Test (POST) and boot process, including the ROM-Based Setup Utility (RBSU).
NOTE: For ProLiant BL10e G2 server blades running Windows® 2000 Server, there is now available a Serial
Console for Windows utility that provides serial-based administrative functionality using the Integrated
Administrator remote console feature. For more information and to download the Serial Console for Windows
utility, go to the following page:
http://www.compaq.com/support/files/server/us/locate/20_2611.html
User administration for up to 25 users. Server blade bay privileges can be set on a per-user basis
Virtual NMI button generates non-maskable interrupt for crash debug and analysis
Support for Network Time Protocol (NTP)
IP Security feature limits access to user-specified IP addresses
AlertMail enables email alerts for system events
More than 100 scriptable commands enable automated management
Selective enabling of all protocols, such as Telnet
Logging of operating system console, server blade and enclosure hardware events, user actions and invalid
login attempts
Emergency server blade enclosure shutdown caused by a critical temperature
Enclosure Link (2) connectors reserved for future use.
CAUTION: The enclosure link (RJ-45) connectors on the interconnect tray are not to be used. Connecting an
external device to these enclosure link (RJ-45) connecters may damage your external device.
For more information on the ProLiant BL e-Class Integrated Administrator, please visit the Web site at:
http://www.compaq.com/products/servers/proliant-bl/e-class/integrated-admin.html
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 5
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Standard Features
HP ProLiant BL e-Class C-GbE Interconnect Switch Features
Provides up to a 40-to-1 reduction in network cables for each server blade enclosure using a pair of nonblocking layer 2 switch modules
Four RJ-45 10/100/1000T Gigabit Ethernet uplinks
Forty 10/100T Ethernet ports dedicated to server blade-to-interconnect switch network communications
Communicate with all 40 server blade network controllers through any one uplink connector and the
management connector
Spanning tree protocol for loop-free path redundancy
Browser, scriptable CLI, and console-based interfaces for local and remote interconnect switch management
Manage entire interconnect switch through the Integrated Administrator connectors or any uplink connector
Telnet, RMON and SNMP support; SNMP-based scripting utility with example scripts
256 Port-based IEEE 802.1Q tagged VLANs per switch processor module
IGMP (internet group management protocol) snooping and quality of service (QoS) packet prioritization
TFTP server support for rapid deployment of multiple interconnect switches and to provide backup and
restore capabilities
Industry-standard design compatible with industry-standard network components from leading network
manufacturers
Fully pre-configured for rapid deployment and immediate operation in ProLiant BL e-Class enclosure
For more information on the ProLiant BL e-Class C-GbE Interconnect Switch, please visit the Web site at:
http://www.compaq.com/products/servers/proliant-bl/e-class/interconnect-switch.html
Other Options
RJ-21 to RJ-45 Cable option kit; contains four (4) 10 foot RJ-21 to RJ-45 cables (for use with the RJ-21 Patch
Panel) interconnect tray
Diagnostic Adapter Interfaces
NOTE: Two Diagnostic Adapters are included with every ProLiant BL10e G2 Server Blade Enclosure.
ProLiant BL10e G2 server blade LEDs and buttons
PS/2 Mouse
PS/2 Keyboard
Video
Serial
USB (2)
NOTE: Please see the following URL for additional information regarding USB support:
http://www.compaq.com/products/servers/platforms/usb-support.html.
NOTE: This Web site is available in English only.
NOTE: Server blades also support USB keyboard and USB mouse attached via the Diagnostic Adapter. The following
USB devices have been tested for use with the ProLiant BL10e and the Diagnostic Adapter:
USB Easy Access Keyboard (Carbon) (PN 267146-xx8)
USB Easy Access Keyboard (Carbonite) (PN DC168B#)
USB 2-Button Scroll Mouse (Carbon) (PN 195255-B25)
USB 2-Button Scroll Mouse (Carbonite) (PN DC172B)
USB Floppy (PN 304707-B21)
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 6
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Standard Features
ProLiant Essentials
ProLiant Essentials Rapid
Foundation Pack
Deployment Pack
Software for the ProLiant
BL Server
Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution
for all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant
Integration Module featuring ProLiant server pre-configured events for OS installation,
and optimized software drivers, firmware and management agents. Every RDP CD
includes 10-node trial licenses for evaluation purposes. RDP requires a license for
each server deployed and are available for purchase with blade servers. For more
information, visit http://www.hp.com/servers/rdp.
HP Systems Insight Manger
HP Systems Insight Manager (HP SIM) help maximize system uptime and performance
and reduce system maintenance costs by providing proactive notification of problems
before those problems result in unplanned downtime or reduced productivity. HP SIM
is easy to set up to work with the Insight Management Agents, integrated Light-Out
and Remote Insight Light-Out Edition, and Version Control Agents to deliver robust
fault, configuration, and asset management as well as remote administration. With HP
Systems Insight Manager customers will also be able to take advantage of role-based
security; the ability to manage ProLiant, Integrity, and HP9000 systems; and plug-ins
for storage, client, printer, and power management as well as server rapid
deployment, performance management, and workload management. For more details
on HP Systems Insight Manager visit http://www.hp.com/go/hpsim.
Management Agents
The Management Agents form the foundation for HP's Intelligent Manageability
strategy. They provide direct, browser-based access to in-depth instrumentation built
into HP servers, workstations, desktops, and portables, and send alerts to HP
Systems Insight Manager and other enterprise management applications in case of
subsystem or environmental failures. For additional information about the Management
Agents and other management products from HP, please visit the management Web
site at http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email
subscription service that provides software and driver change notifications for
ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis.
ROMPaq, support software,
and
configuration utilities
The latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options, available in the RDP CD, SmartStart or downloadable from
Software and Drivers download pages, linked from the SmartStart website at
http://www.hp.com/servers/smartstart.
Survey Utility and diagnostics The most advanced configuration analysis, reporting and troubleshooting utilities used
utilities
by HP and at your fingertips, available in SmartStart.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:
http://www.hp.com/servers/proliantessentials
Optional ProLiant
Essentials Value Packs
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific
business problems and needs:
Workload Management Pack - provides easier management of complex environments, improving overall
server utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple
applications on a single multiprocessor ProLiant Server.
Performance Management Pack - a performance management solution that identifies and explains hardware
performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their
valuable resources.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to
http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for
more information.
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 7
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Standard Features
SmartStart
SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server
configurations. SmartStart 7.00 and later can now deploy the ProLiant BL20P G3 and ProLiant BL40P servers, using
the I/O port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the
coupon that is included with your Blade server or order your copy from the SmartStart web site. For more
information, please visit the SmartStart Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 6.20
Industry Standard
Compliance
ACPI 1.0b compliant
SDG 3.0 compliant
Microsoft Logo certifications
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757)
groups 1, 2, 3, and 9, and Ethernet MIB (RFC1643) (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray
option)
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.3ac and 802.1Q, IEEE 802.1Q, and IEEE
802.3x (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option)
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9 (ProLiant BL e-Class C-GbE Interconnect
Switch interconnect tray option)
Intelligent Manageability
Insight Manager 7
HP Systems Insight Manager
ROM Based Setup Utility (RBSU)
Automatic Server Recovery (ASR-2)
Enclosure Self Recovery (ESR)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server Blade and Enclosure Health Logs
Redundant Power Supply Utility
Power Down Utility
Pre-Failure Warranty (covers processors, hard drives and memory)
HP Interconnect Switch Management System and Utilities (included with the ProLiant BL e-Class C-GbE Interconnect
Switch interconnect tray option)
Availability
Redundant Hot-Plug Power Supplies (ProLiant BL e-Class Server Blade Enclosure)
Redundant Hot-Plug Fans (ProLiant BL e-Class Server Blade Enclosure)
ECC Memory (ProLiant BL10e Server Blade)
Redundant ROM (ProLiant BL10e Server Blade)
Support for ProLiant network adapter teaming
Dual network communication paths to each server blade using redundant, non-blocking layer 2 switch modules
Redundant inter-module communication links
Two redundant uplink ports per each interconnect switch module
IEEE 801.1D Spanning tree protocol for loop-free path redundancy
Redundant configurable community strings and SNMP trap manager hosts
IEEE 802.3ad automatic multi-link load balancing and link failover (excluding LACP)
Security
Power-on password
Administrator's password
Secure Shell (SSH) access through the Integrated Administrator serial console
ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option security
Multilevel user names and passwords with configurable time out period setting
Ability to disable web-based and Telnet access to the switch user interfaces
256 IEEE 802.1Q tagged VLANs per interconnect switch module
Unicast and multicast static MAC address packet filtering table (layer 2 access control list)
Ability to specify the IP based management stations that are allowed to access each switch
Restriction on the maximum number of MAC addresses learned on a per port basis
Secure shell (SSH) access to the switch command line and menu driven interfaces via the Integrated Administrator
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 8
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Standard Features
OS Support
Rack Airflow
Requirements
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit OS Support Matrix at:
http://www.hp.com/go/supportos.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at
http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at
http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency
for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing
these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and
to prevent damage to the equipment
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq
cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to
the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum
of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal
damage.
NOTE: Please consult the Setup & Installation Guide for the server for additional details.
Service and Support
Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives,
memory and processors). The warranty is fully supported by HP Services and a worldwide network of resellers and
service providers. In addition 90-day's getting started software telephone support may be covered under the
warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack
services.
NOTE: Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year onsite support.
Care Pack services provide a range of life cycle support options that let you choose the service levels that meet
your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call
window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWarebased IT solutions helping to deliver high level of application availability. Response times range from 30 mins
for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the p-Class blade
enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and
power distribution.
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or
visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at:
http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 9
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Models
ProLiant BL10e G2 P1GHz- Processor
1MB (ULV), 512-MB, 40-GB Cache Memory
ATA
Memory
333773-B21 (1 pack)
333774-B21 (10 pack)
Network Controller
One Ultra-Low Voltage Intel Pentium M 1GHz processor
1-MB Level-2 on-die cache
512 MB (Standard) to 1024 MB (Maximum) PC2100 Registered ECC DDR DIMM Memory
standard (1x512 MB)
Two NC3163 Fast Ethernet NIC PCI 10/100 full WOL and PXE Integrated
Hard Drive
One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug 2.5" hard drive
Form Factor
Plugs vertically into HP ProLiant BL10e G2 Server Blade Enclosure
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 10
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
ProLiant BLe-Class
Unique Options
Four (4) RJ-21 to RJ-45 cables for use with the RJ-21 Patch Panel interconnect tray
(10 foot cables)
257076-B21
Enclosure Shipping Bracket Kit
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.
293119-B21
ProLiant BL e-Class Server Blade Enclosure
243280-B21
ProLiant BL e-Class Server Blade Enclosure (includes 20 licenses for ProLiant Essentials Rapid
Deployment Pack at 50% of the standard per-node license list price)
273644-B21
Interconnect Trays (each
includes an Integrated
Administrator module)
Interconnect Tray, ProLiant BL e-Class C-GbE Interconnect Switch
243283-B21
Interconnect Tray, RJ-21 Patch Panel
253177-B21
Interconnect Tray, RJ-45 Patch Panel
243282-B21
ProLiant Essentials
Value Pack Software
ProLiant Essentials Rapid Deployment Pack (1 node license, V1.1)
NOTE: Each server blade bay slot populated by a server blade requires one license.
267196-B21
ProLiant Essentials Rapid Deployment Pack (10 node license, V1.1)
NOTE: Rapid Deployment pack is now available in Linux only environments.
269817-B21
Flexible Quantity License Kit
302127-B21
License-Only - for use with a Master License Agreement
302128-B21
ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning Manager
version 2.0)
303284-B21
ProLiant Essentials Intelligent Networking Pack, Single Server License
NOTE: For use with a single server. Contains one license with a unique license activation key
and documentation.
372906-B21
ProLiant Essentials Intelligent Networking Pack, Flexible License
NOTE: For use with multiple servers. This part number can be used to purchase multiple
licenses with a single activation key. The quantity ordered for this part number will be the
quantity of licenses included in the kit in the form of a corresponding activation key. Use the
same key to activate all licenses in the actual quantity ordered. For a given order, one kit will be
delivered with the activation key, and documentation.
372950-B21
ProLiant Essentials Intelligent Networking Pack, Tracking License
NOTE: For use with signed and implemented Activation Key Agreements only. Purchase of this
part number entitles the customer to deploy additional licenses of the product under the terms of
the existing Activation Key Agreement.
NOTE: Nothing is delivered in conjunction with the purchase of this part number. Visit
http://h18004.www1.hp.com/products/servers/proliantessentials/license/akalic.html
for more information on Activation Key Agreements.
372951-B21
Server Blade Enclosure
NOTE: For more information regarding ProLiant Essentials Software, please see the following
URL: http://www.compaq.com/proliantessentials.
Memory
(SDRAM DIMMs)
UPS and PDU Power Cord
Matrix
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
287494-B21
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
287495-B21
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
287496-B21
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and
PDU units:
ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 11
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
Uninterruptible Power
Systems- Rack
UPS Options
HP UPS R1500 XR (1440VA, 1340 Watt), Low Voltage (NA)
204404-001
HP UPS R1500 XR (1500VA, 1340 Watt), High Voltage (Int'l)
204404-B31
HP UPS R1500 XR (1500VA, 1340 Watt), Low Voltage (Japan)
204404-291
HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage (NA)
192186-001
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (NA)
192186-002
HP UPS R3000 XR (2400VA, 2250 Watt), Low Voltage (Japan)
192186-291
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Japan)
192186-292
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Int'l – detachable cord)
192186-B31
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A IEC309 Plug)
192186-B32
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage
(16A CEE 7/7 SCHUKO Plug)
192186-B33
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A BS-546 Plug)
192186-AR1
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (NA)
NOTE: The UPS R6000 has a hardwired input.
347207-001
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Int'l)
NOTE: The UPS R6000 has a hardwired input.
347207-B31
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Japan)
NOTE: The UPS R6000 has a hardwired input.
347207-291
UPS R12000 XR N+ x (200-240V) (WW-hardwired)
NOTE: The UPS R12000 XR has a hardwired input and output.
207552-B22
SNMP Serial Port Card
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.
192189-B21
Six Port Card
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.
192185-B21
Extended Runtime Module, R1500 XR
NOTE: 2U each, two ERM maximum.
218971-B21
Extended Runtime Module, R3000 XR
NOTE: 2U each, one ERM maximum.
192188-B21
Extended Runtime Module, R6000
NOTE: 3U each, two ERM maximum.
347224-B21
Extended Runtime Module, R12000 XR, 4U
NOTE: 4U each, two ERM maximum.
217800-B21
R12000 XR BackPlate Receptacle Kit, (2) L6-30R (NA)
NOTE: The R12000 XR BackPlate Kit has a hardwired input.
325361-001
R12000 XR BackPlate Receptacle Kit, (2) IEC-309R (WW)
NOTE: The R12000 XR BackPlate Kit has a hardwired input.
325361-B21
SNMP-EN Adapter
NOTE: Supports R6000 UPS series only.
347225-B21
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 12
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
Modular PDUs 1U/0U
(Up to 32 outlets)
HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)
(NA, Japan)
NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of the UPS
R3000 XR.
NOTE: 1U/0U mounting
brackets shipped with the unit HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)
(optimized for 10000 and
(NA, Japan)
9000 series racks).
HP Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l)
252663-D71
252663-D72
252663-B31
HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC) (WW)
NOTE: This mPDU (252663-B21), 40A model has a hardwired input.
252663-B21
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW)
NOTE: This PDU has a detachable input power cord and allows for adaptability to country
specific power requirements (country-specific cord needs to be ordered separately; for North
America, need IEC C19 to L6-20P power cord PN: 340653-001). This model may also be used
with the high volt UPSs R3000 XR and R6000.
252663-B24
NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs)
QuickSpecs for additional options including shorter jumper cables and country specific power
cords:
http://www5.compaq.com/products/quickspecs/11041_na/11041_na.HTML (North America)
http://www5.compaq.com/products/quickspecs/11041_div/11041_div.HTML (Worldwide)
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 13
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
USB Options
USB Easy Access Keyboard (carbon)
267146-xx8
USB Easy Access Keyboard (Carbon) Country Key Code
Dash #
Description
Dash #
Description
-008
US
-178
Arabic
-038
UK
-188
Belgium
-048
Germany
-218
Hungary
-058
France
-228
Czech
-068
Italy
-238
Slovac
-078
Spain
-248
Polish
-088
Denmark
-258
Russian
-098
Norway
-298
Japan
-108
Sweden/Finland
-338
Dutch
-128
French Canadian
-358
Finish
-138
Portugal
-B38
Int'l
-148
Turkey
-B48
BHCSY
-158
Greek
USB Easy Access Keyboard (carbonite)
DC168B#
USB Easy Access Keyboard (carbonite) Country Key Code
Dash #
Description
Dash #
Description
A2M
ICELAND
ABT
HE
AB0
TAWA
ABU
UK
AB1
KOR
ABV
ARA
AB2
PRC
ABX
FIN
AB6
FR A
ABY
DEN
AB7
GRK
ABZ
ITL
AB8
TURK
AC0
BEL
AB9
PORT
AC4
BRZ
ABA
US
ACB
RUSS
ABB
EURO
AKB
CZE
ABC
FCAN
AKC
HUNG
ABD
GR
AKD
POL
ABE
SP
AKL
THAI
ABF
FR
AKN
BHCSY
ABH
NL
AKR
SLOV
ABJ
Japan
ARK
ICELAND
ABM
LA
B15
KAZ
ABN
NOR
UUZ
SWISS
ABS
SW
USB 2-Button Scroll Mouse (carbon)
USB 2-Button Scroll Mouse (carbonite)
USB Floppy
195255-B25
DC172B
304707-B21
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 14
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
Tape Libraries
HP StorageWorks ESL9000 Series Tape Libraries
ESL9595 Extended Tape Library, 0 drive, 400 slots (card cage, Interface Mgr card, Command
View license)
343378-B21
ESL9595 Library, 0 drive, 400 slots
330833-B21
ESL9322 Extended Tape Library, 0 drive, 222 slots (card cage, Interface Mgr card, Command
View license)
343377-B21
ESL9595 Library, 0 drive, 222 slots
330832-B21
ESL9000 Ultrium 460 drive kit
330834-B21
ESL9000 Ultrium 230 drive kit
301930-B21
ESL9000 SDLT 320 drive kit
293414-B21
ESL9000 400 to 500 slot upgrade
330842-B21
ESL9000 500 to 595 slot upgrade
330842-B22
ESL9000 400 to 595 slot upgrade
330842-B23
ESL9000 222 to 322 slot upgrade
330840-B21
ESL9000 E2400-160 FC Interface Controller (one controller for every four drives)
330839-B21
License for Direct Backup Engine ESL
343375-B21
License for Secure Manager ESL
343376-B21
NOTE: Please reference the ESL9000 Series Tape Libraries QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete
solution; reference current compatibility information at http://www.hp.com/go/ebs
Custom Builder
Please see the Enterprise Configurator for configuration assistance at: http://www.hp.com/products/configurator.
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 15
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
HP Rack 10000 Series
(Graphite Metallic)
S10614 (14U) Rack Cabinet - Shock Pallet
292302-B22
HP Rack 10647 (47U) – Pallet
245160-B21
HP Rack 10647 (47U) – Crated
245160-B23
HP Rack 10642 (42U) – Pallet
245161-B21
HP Rack 10642 (42U) – Shock Pallet
245161-B22
HP Rack 10642 (42U) – Crated
245161-B23
HP Rack 10636 (36U) – Pallet
245162-B21
HP Rack 10636 (36U) – Shock Pallet
245162-B22
HP Rack 10636 (36U) – Crated
245162-B23
HP Rack 10622 (22U) – Pallet
245163-B21
HP Rack 10622 (22U) – Shock Pallet
245163-B22
HP Rack 10622 (22U) – Crated
245163-B23
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels)
-B23 (crated) used for air shipments of empty racks
NOTE: Not all HP equipment is qualified to be shipped in the Rack 10000 series.
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height,
width, depth, weight, and color:
http://www5.compaq.com/products/quickspecs/10995_div/10995_div.HTML (Worldwide)
http://www5.compaq.com/products/quickspecs/10995_na/10995_na.HTML (North America)
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.
Rack Options for HP
800mm Wide Stabilizer Kit (Graphite)
Rack 10000 Series
NOTE: Supported by the Rack 10842 cabinet only.
255488-B21
600mm Stabilizer Kit – Graphite
246107-B21
Baying Kit for Rack 10000 series (Carbon)
248929-B21
42U Side Panel – Graphite Metallic
246099-B21
110V Fan Kit (Graphite)
257413-B21
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P.
220V Fan Kit (Graphite)
257414-B21
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P.
36U Side Panel – Graphite Metallic
246102-B21
47U Side Panel – Graphite Metallic
255486-B21
9000/10000 Series Offset Baying Kit (42U)
248931-B21
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height
together. Kit contents include hardware for connecting racks and a panel to cover the 100mm
gap at the rear of the two racks.
NOTE: For additional information regarding Rack Options, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.
Ballast Option Kit
120672-B21
9000/10000 Series Offset Baying Kit (42U)
248931-B21
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height
together. Kit contents include hardware for connecting racks and a panel to cover the 100mm
gap at the rear of the two racks.
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html
Rack Rail Adapter Kit (25" depth)
120675-B21
100 kg Sliding Shelf
234672-B21
Monitor/Utility Shelf - Graphite
253449-B21
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 16
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
Depth Adjustable Fixed Rail
332558-B21
Cable Management D-Rings Kit
168233-B21
Server Console Switch 1 x 4 port (100-230 VAC)
400336-001
Server Console Switch 1 x 4 port (100-230 VAC) (Int’l)
400336-B31
Server Console Switch 1 x 4 port (100-230 VAC) (Japan)
400336-291
IP Console Switch Box, 1 x 1 x 16
262585-B21
IP Console Switch Box, 3 x 1 x 16
262586-B21
CPU to Server Console Cable, 12’
110936-B21
CPU to Server Console Cable, 3’
110936-B24
CPU to Server Console Cable, 7’
110936-B25
IP CAT5 Cable 3’, 4 pack
263474-B21
IP CAT5 Cable 6’, 8 pack
263474-B22
IP CAT5 Cable 12’, 8 pack
263474-B23
IP CAT5 Cable 20’, 4 pack
263474-B24
IP CAT5 Cable 40’, 1 pack
263474-B25
Switch Box Connector Kit (high voltage) (Int'l)
144007-B33
TFT5600 Rack Keyboard Monitor
221546-xx1
TFT7210R Rack Mounted 17" Monitor
348373-B21
NOTE: For a complete list of Monitors please view the following URL:
http://h18004.www1.hp.com/products/monitors/
1U Rack Keyboard & Drawer (Carbon)
257054-xx1
Country Code Key (for 1U Rack Keyboard & Drawer (PN 257054-xx1))
XX = 001
US
XX = 091
Norway
XX = 031
UK
XX = 101
Sweden/Finland
XX = 041
Germany
XX = 111
Switzerland
XX = 051
France
XX = 131
Portugal
XX = 061
Italy
XX = 181
Belgium
XX = 071
Spain
XX = 291
Japan
XX = 081
Denmark
XX = B31
International
NOTE: For additional information regarding Rack Options, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.
Rack Options for HP,
Compaq-branded, Third
Party and Telco racks
Telco rack-mounting hardware kit for ProLiant BL e-Class Server Blade Enclosure
266076-B21
Enclosure Shipping Bracket Kit
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.
293119-B21
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 17
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Options
Service and Support
Offerings (HP Care Pack
Services)
NOTE: The HP Care Pack services for ProLiant BL e-Class server blades cover the server blade
and the e-Class blade enclosure that the server blade is installed in as well as the interconnect
tray.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years
UA220A
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years , Electronic
UA220E
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years
UA221A
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UA221E
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years
UA222A
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UA222E
Installation & Start-up Services
ProLiant BL e-Class Blade Server Hardware Installation
UA227A
ProLiant BL e-Class Blade Server Hardware Installation, Electronic
UA227E
ProLiant BL e-Class Enclosure and Server Blade Hardware Installation
U4960A
ProLiant BL e-Class Enclosure and Server Blade Hardware Installation, Electronic
U4960E
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer
supplied server designated as a Deployment Server. Includes the deployment of a single server.
This new server will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration of the newly
deployed server and orientation on product usage. To be delivered during standard office ours,
standard office days.
U5683A
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer
supplied server designated as a Deployment Server. Includes the deployment of a single server.
This new server will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration of the newly
deployed server and orientation on product usage. To be delivered during standard office ours,
standard office days. Electronic.
U5683E
NOTE: For more information, customer/resellers can contact
http://www.hp.com/services/carepack
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 18
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Memory
ProLiant BL10e G2 Server Blade
STANDARD MEMORY
512-MB PC2100 Registered ECC DDR DIMM Memory installed (1 x 512-MB SDRAM DIMM)
STANDARD MEMORY PLUS OPTIONAL MEMORY
Up to 1024 MB PC2100 Registered ECC DDR DIMM Memory is available with the installation of optional SDRAM DIMM memory expansion kits.
Memory
Standard
Optional
Optional
Maximum
Slot
512 MB
640 MB
768 MB
1024 MB
1
2
512 MB
512 MB
512 MB
512 MB
Empty
128 MB
256 MB
512 MB
Following are memory options available from HP:
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
287494-B21
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
287495-B21
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
287496-B21
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 19
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Technical Specifications
HP ProLiant BL10e G2
Server Blade Enclosure
Dimensions
Weight
Power Supply
Height
5.25 in (13.35 cm) (3U)
Width
17.5 in (44.45 cm)
Depth
28.35 in (72.01 cm)
Interconnect Tray
4.5 lb (2.04 kg)
20 server blades
35 lb (15.86 kg)
Enclosure with 2 power
supplies
54.5 lb (24.7 kg)
Total weight fully loaded
94 lb (41.73 kg)
600W, Hot-Plug Redundant Two Redundant Power Supplies (optimized to provide full redundancy at 120 and 220
(2 standard)
volts)
Input Specifications
General Specifications
Normal Line Voltage
100 to 127VAC, 200 to 240VAC
Range Input Line
90 to 264VAC
Frequency Range
43 to 63Hz
Power Factor
> 0.95 (120Vac/Max Load)
Input Current
8.5A @ 120VAC, 4.3A @ 240VAC
Inrush Current
25A
Holdup Time
25mS
Full Output Rating
600W
Minimum Load
Dielectric Voltage
Withstand
Input to Output
1500Vac or 2150Vdc (1 Min.)
Input to Ground
1500Vac or 2150Vdc (1 Min.)
Input Transient
Susceptibility
Common and Differential Mode 2200V
(superimposed on AC line)
Differential Mode
1100V
NOTES: ProLiant BL e-Class Power Calculator is available from the product page at the following address:
http://www.Compaq.com/products/servers/proliant-bl/e-class/index.html
Click "Power Calculator" in the "Support" section.
Non-Hot Plug Ultra
ATA/100 Hard Drives
40 GB 5.4 K
Capacity
40,007 MB
Height
0.374 in (9.5 mm)
Width
2.756 in (70 mm)
Interface
Ultra ATA-5 (IDE) 100 MB/s
Transfer Rate
Synchronous
(Maximum)
27.8 to 44.1 MB/sec (Disk-Buffer)
Seek Time
(typical reads, including
settling)
Single Track
13 ms
Rotational Speed
5,400 RPM
Bytes/Sector
512
Logical Blocks
78,140,160 (LBA)
Physical Configuration
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 20
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Technical Specifications
Two NC3163 Fast Ethernet Network Interface
NIC Embedded 10/100 WOL Compatibility
(Wake on LAN)
Data Transfer Method
Network Transfer Rate
HP ProLiant BL
e-Class C-GbE
Interconnect Switch
10Base-T/100Base-TX
IEEE 802.3/802.3u compliant
32-bit bus-master PCI
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
Connector
Mates into enclosure center wall assembly
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
100Base-TX
Category 5 UTP; up to 328 ft (100 m)
General
Two 24-port Managed Layer 2 Ethernet switches for server network cable reduction
Fully pre-configured for immediate operation
Performance
4.0 Gbps Switching bandwidth
12 Million pps aggregate throughput (64-byte packets)
Full-wire speed for all connections
Forwarding Mode
Store and forward
MAC Addresses
16,382; MAC address based filtering and MAC address packet priority configuring
Memory
64MB Main
12MB Flash
32MB Packet Buffer
Ports
Four RJ-45 10/100/1000 T/TX/T Gigabit Ethernet uplink ports for customer use
Forty 10/100 T/TX fast Ethernet downlink ports dedicated to server blade to
interconnect switch network connections
Two 10/100 T/TX Fast Ethernet ports dedicated to inter-switch module
communications
One RS-232 DB-9 port (console connector for Integrated Administrator)
One 10/100 T/TX Fast Ethernet port (Network management connector for Integrated
Administrator)
Auto-negotiation and auto-sensing with full-duplex
Management
Web-based interface with graphical user interface
Console menu driven Interface via local RS-232 and Telnet
Scriptable command line interface (CLI)
SNMP v1 (RFC 1157) with scripting tool and example scripts
RMON v1 (RFC 1757) groups 1, 2, 3, and 9
Telnet (RFC 854)
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC
2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, Ethernet MIB (RFC1643) and HPspecific switch MIBs
64 Port-based IEEE 802.1Q tagged VLANs per switch module
XML human read/write configuration file
TFTP client (RFC 783) for backup and remote download of configuration and history
log files
IGMP (Internet Group Management Protocol) multicasting
EtherChannel (Fast EtherChannel, GigaChannel) compatible trunking
Uplink port speed and link activity LEDs
Simple network time protocol (SNTP)
Broadcast, multicast, and DA-unknown packet storm control
BootP and DHCP client support
BootP and DHCP client support
Port mirroring
IEEE Standards
Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Quality of Service (QoS) Packet Prioritization
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 21
QuickSpecs
HP ProLiant BL10e Generation 2 (G2) Server Blade
Technical Specifications
IEEE 802.3ac and 802.1Q Port Based Tagged VLANs and VLAN Extensions
IEEE 802.1Q Trunking Encapsulation
IEEE 802.3x Flow Control
Form Factor
Removable interconnect tray that plugs into the rear of the server blade enclosure
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-T (Full-Duplex)
2000 Mb/s
1000Base-T (Full-Duplex)
2000 Mb/s
10Base-T
Categories 3, 4 or 5 UTP;up to 328 ft (100 m)
100Base-TX
Category 5 UTP; up to 328 ft (100 m)
1000Base-T
Category 5 UTP; up to 328 ft (100 m)
Cable Support
© Copyright 2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.
DA - 11686 Worldwide — Version 11 — September 8, 2004
Page 22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising