AOR LA400-RCK ACCESSORY Owner Manual

AOR LA400-RCK ACCESSORY Owner Manual
LA400-RCK
EXTENSION CABLES
LA400-RCK EXTENSION CABLES
FOR THE LA400 MAGNETIC LOOP ANTENNA
This set of cables allows you to separate the control (tuning) box from the loop element, by up to 10m.
Conveniently place the loop element as closely as possible to an open space, such as window, covered balcony,
etc...away from local electrical noise, for a quieter reception experience. LA400 is NOT waterproof!
Cable set-up: Proceed as pictured below. Please note that the coaxial cable goes directly from the loop element
to the antenna input socket of your receiver.
Refer to the LA400 manual on how to operate the antenna.
ルー
Loop element
Coaxial cable
Control cable
Control box
Antenna input socket
of your receiver
AC power supply
Setup examples:
On a window using a (non-supplied)
Using the (non-supplied) base of an
plastic suction hook. Make sure that
antenna mobile mount.
the hook is strong enough to carry
the antenna and cable weight.
AOR, LTD.
2-6-4 Misuji, Taito-ku, Tokyo 111-0055, Japan
Tel:+81-3-3865-1695
Fax:+81-3-3865-1697
www.aorja.com
(June 12, 2012)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement