800 / XC Slip-On (2011

800 / XC Slip-On (2011
Installation Instructions
1.
Make sure the bike is completely cool before starting the
installation. Make sure the bike is secure on a centerstand
or ideally a service lift.
2.
Remove OEM muffler bolt.
Triumph
Tiger 800
V.A.L.E. Slip-on Exhaust System
Part # 005-357040xV-B
3.
Loosen pipe joint clamp.
4.
Remove stock muffler assembly.
5.
Attach TBR slip tube to TBR muffler using the 2 piece
X-Ring and 6x14mm socket head cap screws with lock
washer that are provided. Leave loose enough to make
some adjustments on the motorcycle.
6.
Install TBR muffler assembly.
7.
Install rubber lined muffler support strap and attach using
OEM hardware.
8.
Check alignment. Tighten pipe joint mount, and X-ring
bolts.
9.
Double check your work to ensure everything has been
tightened and is properly installed.
Parts List
Qty. Description
Part Number
1
1
1
1
1
1
Varies
Varies
005-357 04S
005-7-2-3KIT
005-P1-X
015-10212
Muffler Canister
Muffler Canister Clamp
Slip-On Tube
X-Ring KIT
Race Pipe Power Tip (installed)
Sticker Kit
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Installation Instructions
10. Before you run the bike, clean off all fingerprints and dirt, as any oily residue will etch the metal and become somewhat permanent
when the system gets hot. Run the bike and enjoy. It is normal for some white smoke to appear the first time you start the bike.
This is packing/manufacturing oil from inside the pipe burning off. Check for gaps or leaks. If you find a leak, a little high temperature
silicon sealant should fix it. After 50 to 100 miles, recheck all fasteners for tightness.
Triumph
Tiger 800
V.A.L.E. Slip-on Exhaust System
Part # 005-357040xV-B
Care & Cleaning / Warranty Information
Parts List
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. For cleaning use a mild spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
Qty. Description
Part Number
1
1
1
1
1
1
Varies
Varies
005-357 04S
005-7-2-3KIT
005-P1-X
015-10212
Muffler Canister
Muffler Canister Clamp
Slip-On Tube
X-Ring KIT
Race Pipe Power Tip (installed)
Sticker Kit
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue after a few heat cycles, this is a normal characteristic of high quality stainless
steel.
Carbon Fiber Mufflers: Always make sure the fiberglass packing inside is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the Carbon Fiber sleeve. TBR sells repack kits (TBR part # 005-10038) that include new rivets and repack material as well as a drill bit (#30), making it easy
to do yourself. Also, NEVER dyno test your bike with carbon fiber mufflers installed - the intense heat and lack of cooling air can quickly cause the CF material to burn.
Two Brothers Racing does not provide a warranty for burned carbon fiber.
Aluminum Mufflers: Use an aluminum or mag wheel polish such as Mother’s to restore the bright finish to factory spec.
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is” without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use of these products or
parts.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement